Upload
trinhnhi
View
227
Download
0
Embed Size (px)
Citation preview
BLENDERS
Advanced Blending SolutionsPh: 906-914-4180 | Fx: 906-914-4179 | PO Box 37, Wallace, MI 49893www.Adv-Blend.com | [email protected]
The SIMPLICITY Continuous Gravimetric Resin Blender is easy to install, configure, operate, and maintain. SIMPLICITY uses industry-proven components like maintenance-free vibratory feeders, which provide simultaneous metering of all components, eliminating the need for mechanical mixing and consistently producing the desired blend. A color touchscreen provides the operator with an easy-to-use interface and built-in help screens. The controller is highly accurate and reliable to assure total system functionality and integration.
Advanced Blending Solutions manufactures a full line of vacuum convey, feeding, blending, and storage equipment for the plastics industry. Advanced Blending Solutions also offers a full line of PLC/PC-based controls for gravimetric extrusion control, vacuum sequence control, extruder/die temperature control, and blender control.
Features• Standard Models Available from 2-10
Components
• Feeder ranges for standard 35 pcf pellets: 0.4-40 pph; 1-40 pph; 0.4-200 pph; 1-200 pph; 2-500 pph; 10-1000 pph; 100-2500 pph; and 250-6000 pph
• PLC- or PC-based controls with enhanced graphics, and recipe, trending, historian, and inventory management tools
• Loss-in-Weight Technology
• Precision Vibratory Feeders
• Static Mixing
• Powders, Pellet, Flake Regrind
• Integral Vacuum Sequence Control
• Optional Gravimetric Extrusion Control
• Optional High Temp components available
• Optional doors available
Blender Configurations• Mezzanine/Floor Mount. Mezzanine
with gravity feed to either an extruder hopper with high/low proximity sensors, or an extruder mounted weighed downcomer. Floor Mount with optional continuous material convey kit to extruder.
• Extruder Mount with integral weighed downcomer
• Floor Mount with an integral vacuum take-off box
All Rates Are Estimates. Rates will Vary Based on Material Type.
Metric Fasteners are Available.
BLENDERSItem Description Order Code
Blender Base500 pph
1000 pph2500 pph
6000+ pph
SXS1S2S3
Components For X insert number of components X
Controls Allen Bradley PLCBeckhoff Automation
ABBH
Temperature Standard Temp Components (<150oF)High Temp Components(<350oF)
STHT
Frame Size Six Component FrameTen Component Frame
610
Doors DoorsNo Doors
DOORNONE
Insert Order Code Selections to Create Part Number: - - - - -
Item Blender Size Capacity Order Code
Weigh Hopper
Discharge
SX 1/2 ft3 IWH-AS1 1/2 ft3 IWH-A
S2 2 ft3
2 ft3 (Square)IWH-EIWH-ERG
S32 ft3
3 ft3
3 ft3 (Square)
IWH-EIWH-GIWH-GRG
Item Blender Size Capacity Order Code
Vacuum Take-Off
Discharge
SX 2ft3 FVT-2S1 2ft3 FVT-2S2 3 ft3 FVT-3
S3 4ft3
5ft3FVT-4FVT-5
Item Blender Blower w/VFD Max pph Temp. Order Code
Continuous Convey KitDischarge
SX/S1K04/3 hp 1000 Standard
High (<250oF)CC-KIT-2CC-KIT-2-HT
K05/4 hp 1000 StandardHigh (<250oF)
CC-KIT-2.5CC-KIT-2.5-HT
S2
K05/4 hp 1000 StandardHigh (<250oF)
CC-KIT-2.5CC-KIT-2.5-HT
K07/5 hp 1500 StandardHigh (<250oF)
CC-KIT-3CC-KIT-3-HT
K07/10 hp 3000 StandardHigh (<250oF)
CC-KIT-3.5CC-KIT-3.5-HT
S3K07/10 hp 3000 Standard
High (<250oF)CC-KIT-3.5CC-KIT-3.5-HT
Consult Factory 7000 Standard
High (<250oF)CC-KIT-4CC-KIT-4-HT
Insert Order Code Selections to Create Part Number:
SIMPLICITY Discharge Options
Wei
gh H
oppe
rVa
cuum
Tak
e-O
ffCo
ntinu
ous C
onve
y
Advanced Blending SolutionsPh: 906-914-4180 | Fx: 906-914-4179 | PO Box 37, Wallace, MI 49893www.Adv-Blend.com | [email protected]
SIMPLICITY Feeders
*These components are available as Add-Ons**These components are available as Upgrades or Add-Ons
FE40E FE200E-HT FE500E FE1000-HT FE2500 FE6000-HT
PWD-150 PWD-1000 FE1500RG FE3500RG
All Rates Are Estimates. Rates will Vary Based on Material Type.
ITEM TYPE DESCRIPTION ORDER CODE
SIMPLICITY Feeders
Resin
0.4–40 pph Feeder0.4–200 pph Feeder2–500 pph Feeder
2–1000 pph Feeder100-2500pph Feeder250–6000 pph Feeder
FE40E*FE200E*FE500E*
FE1000E*FE2500*
FE6000**
Slip Additive Resin
0.4-20 pph slip feeder with 4” hopper and 10kg loadcell
0.4-20 pph slip feeder with 6” hopper and 20kg loadcell
FE40ES*
FE200ES*
Powder 100 pph (typical max) Powder Feeder1000 pph (typical max) Powder Feeder
PWD-100**PWD-1000**
Regrind/Flake100-1500 pph Regrind Feeder250-3500 pph Regrind Feeder500-5000 pph Regrind Feeder
FE1500RG**FE3500RG**FE5000RG**
Add-On or Upgrade
Add-on for Existing BlenderUpgrade for New Blender
ADDUPG
Temperature Standard Temp(<150o)High Temp(<350o)
STHT
Insert Order Code Selections to Create Part Number: - -
SL BlendersItem Description Order Code
SL Blender200 pph Blender500 pph Blender
1000 pph Blender
SLSLXSL1
No. Components
2 Components3 Components4 Components5 Components6 Components7 Components8 Components9 Components
10 Components
2345678910
Temperature Standard Temp(<150oF)High Temp(<350oF)
STHT
Sequence Valve Sequence ValveNo Sequence Valve
SVNONE
Controls Platform Allen BradleyBeckhoff
ABBH
Insert Order Code Selections to Create Part Number: - - - -
SL Gravimetric Blender
SL Blender Feeders
SL Size:Feeder Style: SL SLX SL1
0.4-40 pph Feeder FE40E FE40E FE40E
Order Code
1-40 pph for Slip Additives FE40ES FE40ES FE40ES0.4-200 pph Feeder FE200E FE200E FE200E
1-200 Feeder for Slip Additives FE200ES FE200ES FE200ES2-500 pph Feeder - FE500E FE500E
10-1000 pph Feeder - - FE10001-150 pph Powder Feeder PWD-150 PWD-150 PWD-150
100-1000 pph Powder Feeder PWD-1000 PWD-1000 PWD-10000.005-2.9 g/h Liquid Feeder LQ25 LQ25 LQ25
Item Description Order Code
Temperature Standard Temp(<150oF)High Temp(<350oF)
STHT
Insert Order Code Selections to Create Part Number: -
Advanced Blending SolutionsPh: 906-914-4180 | Fx: 906-914-4179 | PO Box 37, Wallace, MI 49893www.Adv-Blend.com | [email protected]
February 2016/Blender-5
The SL Continuous Loss in Weight blenders are a lightweight compact design with integral weighed downcomers. These units work well mounted directly to the throat of an extruder or on a mezzanine directly above the extruder throat. With the ability to integrate the Vacuum Sequence Manifold (SVM) into the frame, these units pack significant power and flexibility into a small form.
The SL Blender comes with a Windows Surface Pro-Tablet control system and docking station charger. Multiple units can be combined for a common point of interface, allowing the option for pump sharing, Smart Distribution integration, recipe function, multi-layer rate, or thickness control.
All Rates Are Estimates. Rates will Vary Based on Material Type.