Embed Size (px)
Citation preview
Australian Users Conference 2011
BlastLogicOptimising production, Rationalising costs
Mark Roberts – Development Manager of Blast Accuracy [email protected] 031 376
Australian Users Conference 2011
Design | Validate | Improve
Australian Users Conference 2011
Instant data connection and visualisation
• Blast analytics - bring your data to life• Track execution against designs• Accelerate the process of improvement “Fume is always a problem in the eastern half of Pit 1 in the spring months” “Results in Pit 2 were more cost effective with a lower powder factor and faster timing”
Australian Users Conference 2011
Band of Optimal Performance
Overall
Blasting cost
Processing cost
Load & haul cost
Cost
Blast Effort
Optimum
Australian Users Conference 2011
Maptek delivers the solution
• Mine process
• Functional teams
• IT
• Drill Nav
STEP 1: Understand requirements
STEP 2: Deliver solution
STEP 3: Entrench solution
STEP 4: Accelerate customer ROI
STEP 5: Periodic review & update
1.5 months
3 months
9 months
12 months
Australian Users Conference 2011
Drilling Quality Control
• Drill Hole Validation• Direct from drill server or Import CSV• Quickly spot problem holes• Red flags against custom tolerances• Abandon | In-fill | Re-drill
Australian Users Conference 2011
Hole Quality Reporting
• Diagnose Hole Status vs Design• Average over/under/re-drilling• Objective operator feedback• Drilled vs backfilled vs target• Water trends | Average fallback
“We’re over-drilling by almost a foot on average after fallback. “Alice is our most accurate driller. Fred is our most productive”
Australian Users Conference 2011
Vibration | Overpressure | Fragmentation
Blast Modelling, Control
Australian Users Conference 2011
Tie up
• Optimise timing and share results• Quick and flexible tie up tools• Dynamically compare multiple designs• Vibration | Overpressure | Fragmentation
Timing and Vibration Model
Australian Users Conference 2011
Synchronise | Measure | Charge | Report
Tablet
Australian Users Conference 2011
Inventory Management
• Audit trail• Goods Received, dispatched and used• Reconciliation back to the magazine• Reports for planned and historical usage
Australian Users Conference 2011
Post Blast
• Report and Reconcile• Log Results via BlastLogic Tablet
“There were 3 misfires carried over from last monthin Pit 7”“Fume levels from lower shots are decreasing”“November’s average PF was 0.72 lb/cyd”“We don’t have enough 42ms Surface Lines for next weeks designs”
Blast Volumes with Misfired Holes Highlighted
Tablet: Custom Post Blast Report | Misfire Reporting
Australian Users Conference 2011
BlastLogic System
Australian Users Conference 2011
Blast Analytics
Visualise | Report | Fast
Australian Users Conference 2011
www.maptek.com
