Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
Faillace Extra Small Bone ClampDesigned by John J. Faillace, MD, FAAOS
Delicate enough to use on metacarpals but strong enough for distal radius and larger bones with its extra long ratchetPRODUCT NO:
1171 Overall Length: 5" (12,7 cm) Jaw Length: 1" (2,5 cm)
MADE EXCLUSIVELYFOR INNOMED IN
G E R M A N Y
Duke Classic Acetabular Retractor with Extra Grip TipDesigned by Justin Duke, MD
Designed to retract the femur during acetabular exposure for either posterior or lateral approachesPRODUCT NO:
7622 Overall Length: 13.5" (32,3 cm) Handle Length: 9" (22,9 cm) Depth from Bend: 4" (10,2 cm) Prong Depth: 1.25" (3,2 cm)
Posterior approach usage demonstrated. May also be used to retract the femur posteriorly during lateral exposure.
Chandran Modified Knee RetractorDesigned by Rama E. Chandran, MD
Teeth designed to help prevent tilting of the retractor and protect the patellar tendon during robotic assisted total knee replacment
PRODUCT NO:
7117 Overall Length: 8.75" (22,2 cm) Blade Width: .625" (1,6 cm) Blade Depth from Handle: 5" (12,7 cm)
Also useful to retract structures on the lateral side of the tibia.
Blades with Teeth for Self-Retaining Hip Retractor System
PRODUCT NO’S:
Blade Width: 1" (2,54 cm)C1013 2.5" (6,4 cm) blade depthC1013-01 4" (10,2 cm) blade depth
New Product Update
Innomed, Inc., 103 Estus Drive, Savannah, GA 31404© 2020 Innomed, Inc. All rights reserved.ISO 13485:2016
AUGUST 2020
Innomed, Inc 103 Estus Drive Savannah, GA 31404 USA
Tel 912.236.0000 Fax 912.236.7766
www.innomed.net [email protected]
Innomed-Europe LLC Alte Steinhauserstrasse 19 CH-6330 Cham, Switzerland
Tel 0041 (0) 41 740 67 74 Fax 0041 (0) 41 740 67 71
innomed-europe.com
Innomed-Europe GmbHc/o Emons Logistik GmbH In Rammelswiesen 9 D-78056 Villingen-Schwenningen Deutschland
Tel 0049 (0) 7720 46110 60 Fax 0049 (0) 7720 46110 61
PRODUCT NO'S:
6022 [Standard] Overall Length: 15.625" (39,7 cm) For retractors up to .125” (3,2 mm) thick6022-01 [Large] Overall Length: 15.625" (39,7 cm) For retractors up to .16” (4 mm) thick
McPherson Retractor ExtenderDesigned by Ed McPherson, MD
Designed to extend a standardretractor to help provide additional leverageNow in two sizes to accomodate most retractors — standard for retractors up to .125" (3,2 mm) thick, and large for retractors up to .16" (4 mm) thick.
Foster Tibial Component DisimpactorDesigned by Scott A. Foster, MD
Designed for removal of a total knee tibial componentPRODUCT NO’S:
1213-00 [Set]Set Includes/ Available Separately:
1213-01 [Foster Tibial Prosthesis Disimpactor] Overall Length: 14" (35,6 cm) Depth from Bend: 4.5" (11,4 cm) Fixed Handle Width: 5.5" (14 cm)1213-B [Foster Tibial Prosthesis Blade]Two included in Set, one with this product number Overall Length: 4.875" (12,4 cm) Handle Length: 4.5" (11,4 cm)3924-RH [Silicone Grip Handle] Overall Length: 4" (10,2 cm)
Designed with flat plate jaws and no teeth to help grasp a small pain catheter tip, allowing for insertion of the pain catheter without damaging the tipMarkings every 3 cm on shaft with a bold line at 12 cm for depth determination.
PRODUCT NO:
1783 Overall Length: 11.2" (28,5 cm) Shaft Length: 8.25" (21 cm)
MADE EXCLUSIVELYFOR INNOMED IN
G E R M A N Y
Mobilize bone-implant interface first with a bonesaw of choice, then lock in horizontal position for driving
blade under base of prosthesis.
Pivot handle to lock in vertical position for driving prosthesis
up and out.
Set Includes: Disimpactor, (2) Blades, Silicone Grip Handle
Kopplin Pain Catheter Insertion GrasperDesigned by Matthew Kopplin, MD
© 2020 Innomed, Inc.