Kincrome Measuring Wheel 300mm (12”)• Collapsible Shaft: Folds in

half from 1120mm to 600mm• Measures up to 10,000m• 10cm Increments

• Zero Reset Button• Comfortable rubber pistol

handle with remote counter reset • Button & brake functionK11211

$129ON SALE NOW UNTIL THE END OF APRIL 2015.

WHILE STOCK LAST.

125mm, Angle Grinder• Anti-vibration handle• Slide switch angle grinder

with carry case • 1200WG13SW(H6)

$1940

P17P Petrol Compressor• Free Air Delivery @ 100PSI: 350LPM• 2 cylinder, slow revving, cast iron pump• Warranty: 5yr pump, 3yr Honda• 6.5HP Honda engine• Pump RPM: 1061• 68 litre air receiver• Max PSI: 14500128

BONUS

20M Air HoseWith every Belt Driven Compressor!00348

$1940

Visit our site to join our club and get access to special offers, advanced notice of new products... www.bjbearings.com.au

New Entry Level Domestic Cleaner• Powerful 2400 Psi• 8.3 l/m water flow• Powerease 5hp Vertical

OHV petrol engine• Italian Pump• Folds for easy storage,

ready to use120 BEVR2455-R

$499NEW!

$199

CATEGORY TITLE2

Large Imperial S/Steel Pin Kit - 144 PieceContents:• 50Pce 1/8” x 2”• 30Pce 5/32” x 2½”• 20Pce 3/16” x 3”• 20Pce 1/4” x 2”• 16Pce 1/4” x 3”• 8Pce 5/16 x 2½”HP101SS

Part No Description Pieces Price

HP103 Large Imperial Split Pin 144 $18.00HP104 Imperial Internal/External Circlips 300 $15.00 HP105 External Inch. Circlip Kit 300 $15.00HP106 Metric Internal/External Circlips 300 $15.00HP109 Imperial E-Clip 300 $15.00HP110 Metric E-Clip 300 $9.00HP114 Imperial O-Ring 225 $15.00HP116 R-Clip Kit 150 $15.00HP117 Imperial Roll Pin 315 $22.00HP118 Metric Roll Pin 315 $22.00

Part No Description Pieces Price

HP120 Imperial Grub Screw 240 $17.00HP124 Extention & Compression Springs 200 $13.00HP125 Metric Copper Washer 220 $38.00HP126 Metric Grub Screw 240 $17.00HP128 Clevis Pin 60 $17.00HP135 Imperial Socket Head Screws 120 $17.00HP136 Metric O-Ring 225 $17.00HP139 Auto Blade Fuse & Tester 92 $17.00HP144 Shrinkable Tube 127 $10.00

Part No Description Pieces Price

HP146 Hose Clamp Kit 29 $13.00HP153 Aluminum Rivet Kit 500 $13.00HP171 Metric Socket Screw Kit 120 $17.00HP172 Imperial Grease Nipple 100 $29.00HP173 Metric Woodruff Keys Kit 110 $17.00HP174 Metric Grease Nipple Kit 100 $29.00HP175 Metric Parallel Key 60 $15.00HP176 Metric Fibre Washer Kit 600 $29.00HP177 Rubber Grommets O&C 125 $17.00HP178 Parallel Machine Key 60 $15.00HP179 Dowty Sealing Washer 90 $25.00HP188 Home Handy Assortment 508 $15.00

ALSO AVAILABLE

$15

$38

$15

Imperial Split Pin Kit - 555 PieceContents:• 150Pce 1/16” x 1”• 150Pce 3/32” x 1”• 150Pce 3/32” x 1½”• 100Pce 1/8” x 1¼”• 75Pce 1/8” x 2”• 30Pce 5/32 x 2½”HP101

Star & Spring Washers Kit - 720 PieceLocking Washer:50Pce #6 50Pce #8 50Pce #1040Pce 1/4” 30Pce 5/16” 20Pce 3/8”

Internal/External:50Pce #6 50Pce #8 50Pce #1040Pce 1/4” 30Pce 5/16” 20Pce 3/8”

HP112

Lynch Assotment Kit - 50 PieceContents:• 16Pce 3/16 x 17/16”• 6Pce 5/16 x 1¾”• 18Pce 1/4 x 1¾”• 10Pce 7/16” x 1¾”HP185

$22

ASSORTMENT KITS2

Gasket Removal Kit• Assorted 2” Conditioning discs• 25000 RPM• ¼” Right angle

die grinderARX-114HRK

1/2” Impact Gun Kit• 650 Ft/Lbs (880Nm)• Assorted Metric &

Imperial SocketsARX-650K

$275

3/4” Impact Gun Kit• 725Ft/Lbs

(980Nm)• Assorted Metric

Impact SocketsARX-27AK

3 Piece Irwin Snips SetStraight, Left and Right SnipsARX-AV3SNIPS

• 1.5mm to 10mm• 1.5mm is 90mm

long and 10mm is 175mm long

ARX-66099

• 1/16” to 3/8”• 1/16” is 90mm

long and 3/8” 175mm long

ARX-66199

Extra-long B/end Allen Keys Metric & Imperial

$1950

$148

$1950

$395

$69

3/16” Aluminium Riveter Kit• 4 Nose tips • 3/32, 1/8, 5/32

& 3/16)ARX-200NK

$148

TOOLS & ACCESSORIES 3

$88

$148

$98

$12From

3/8” Reversible Angle Head Drill1650RPMARX-510H

3/8” Reversible Drill1800RPMARX-212

BAHCO 3 Piece Adjustable Wrench Set6” 8” & 10”ADJUST3

3 Leg PullersDurable & affordable pullers:

3” ARX-3MP3 $12.004” ARX-3MP4 $16.006” ARX-3MP6 $19.808” ARX-3MP8 $45.00

4

Nut Splitter• Splitting of

Seized Bolts and/or Over Tightened Bolts without Damaging the Thread

• Chrome Molybdenum Steel Blades with Forged High Carbon Steel Grips

• Hardened, Tempered & Chrome Plated for Rust Resistance

9-12mm SP31211 $1412-16mm SP31212 $1716-22mm SP31213 $2122-27mm SP31214 $25

$14From

12pt Socket Sets• Chrome vanadium steel for high durability• Flat drive technology to maximize grip

23pc 1/4”Dr (4-13mm) 3/16-1/2” SP20100 $6932pc 3/8”Dr (6-22mm) 1/4-7/8” SP20200 $9941pc 1/2”Dr (10-32mm) 3/8 - 1-1/4” SP20300 $179

$69From

3hp Triple Cast Iron Compressors

• Steel valve plate with stainless steel valves• Triple cylinder compressor pump

with cast iron crankshaft and cylinder• Overload protection of electric

motor with thermal relay• On/off pressure switch

• Filter/Regulator• 309 L/min FAD

• 240V/15amp• Drain cock

www.sptools.com

$110060L

$1389100L

134 Piece Metric/SAE Concept Series Tool Kit• ROE combination spanners• 1/4”, 3/8” & 1/2”Dr sockets

& accessories• Combination pliers & diagonal cutters• 7 drawer tool box• Hammer, hex keys, adjustable wrench• Screwdrivers, wobble extension barsBlack SP50097 $799Red/Black SP50192 $799Orange/Black SP50197 $799

286 Piece Metric/SAE Custom Series Tool Kit

• All sockets, socket accessories & ROE spanner

come in hi-density foam storage system

• Maxi drawers featuring 405mm depth

• ROE & flare spanners• 1/4", 3/8" and 1/2"

dr sockets & accessories• Screwdrivers

• Pliers & cutters• Hex & TORX keys

• Adjustable wrenches• Hammer, hacksaw & tape measure, punch & chisel set

• 6x tool storage trays• 8 drawer steel box

• 7 drawer steel roller cabinet

SP50105

3.2hp Inverter Generator• Max 2000W, rated 1600W• From 52dB(A)• 4.1Lt tank capacity• Pull start• Parallel connection

capable• Parallel connection

cable included• Meets EPA &

CARP standardsTI2000

5 Drawer Custom Roller Cabinet• Size (680w x 460d x 812h)• Full drawer extension capabilities• Internal locking system for extra

security• Heavy duty 28 ball bearing

drawer slides• Robust wall construction• Double powder coating resists

scratchingSP40111

Mini Infared Thermometer• LCD display with

backlight• Single dot laser• Targeting• Low battery

Indication• Auto power offSP62022

Bearing PackerSelf Contained Bearing Packer Saves time & Can Be Used Anywhere No Air Line or Grease Gun Required• Packs 50 to 60 Bearings

Without Refilling• Transparent, impact

resistant cup allows grease level check

• Works on Bearings up to 90mm (3-½") O.DSP30888

$57 $89

Industrial Angle Grinders

• 12,000rpm, 566L/min max air con.

100mm SP-1254 125mm SP-1257

$385

Digital Calipers• Graduation 0.01mm/0.005”

• Stainless Hardened • power On/Off

• Meets or Exceeds DIN862 Standard

150mm SP35631 $79300mm SP35633 $149

$1995

$998

$499

1300W Electric pressure washerwith compressorSPW112

BONUS

ea

$79From

$799ea

XRS1800

XRS18

INDUSTRIAL TOOLS & EQUIPMENT4

FILTRATION

Clean Oil Vital to Engine PerformanceImproved high-performance engines and new emission standards have had a significant impact on the development of oils and oil filters. As manufacturers continue to develop more sophisticated engines, new classifications of oils will continue to be developed.

These new oils play a vital part in protecting engines by reducing friction and wear, cooling engine parts, sealing combustion chambers, cleaning engine components and inhibiting corrosion. Lube filters also play a critical role in protecting engines by removing damaging contaminants from the oil.

Lube filters trap oil contaminants in two ways:

• Some particles adhere to the filter media as the oil flows through the filter. These particles attach themselves to the media surface without plugging the media pores.

• Other particles are trapped in the filter media by the pressure of the oil as it flows through the filter.

The Baldwin DesignBaldwin Filters’ High Velocity Dual-Flow line includes dual-flow lube filters to be used on Cummins ISM, ISX and Series 600 engines as replacements for the Fleetguard Venturi™ filter line.

There are differences between standard dual-flow lube spin-on filters and the High Velocity Dual-Flow filters.

High Velocity Dual-Flow spin-ons have one inlet and one outlet. Oil flowing through the filter is sent directly to the engine to protect vital engine components, rather than a portion being returned to the sump as with conventional dual-flow filters.

The High Velocity Dual-Flow spin-on design is also superior to standard full-flow/by-pass designs in that a larger portion of the flow travels through the high efficiency element, removing more small contaminants. In traditional full-flow/by-pass designs, only a small percentage of flow, 10% or less, travels through the high efficiency element.

High Velocity Dual-Flow®

Baldwin Filters’ High Velocity Dual-Flow lube filters provide improved engine protection during extended oil drain intervals, high idle time and harsh operating conditions. The patented design of the High Velocity Dual-Flow filters provides maximum filtration, while the heavy-duty construction ensures dependable operation.

FILTRATION.

Full-flow, Lube Spin On Filterto suit Ford Falcon (1966 ~ 2002) B2

Dual Flow Lube Spin Onto suit Cummins Engines BD103

High Efficiency Lube Spin On to suit Catepillar Engines B7299

Outer Air Elementto suit John Deere, Allis Chalmers, Bobcat PA1667-FN

$495 $3870 $2790 $1750

Dual Flow Lube Spin Onto suit Cummins EnginesBD103

5

6

Wall mount Professional CleanerThe ideal workshop unit…• 2175 Max pressure • – 9 l/m Max Flow• Compact design• Made in Italy by Comet• Optional wall mount hose reel

available – ask your store today• Supplied ready to workK250 9/120 Static

$1999NEW!

Tradies 4000 psi Petrol Cleaner• Genuine Honda GX390

engine• Comet ZWD plunger

pump with external unloader

• Supplied ready to work with 15m hose/gun/lance kit

• Detergent injection as standard

• Cleans the toughest jobs!

BAR4013-H

$2399

Honda Domestic Petrol Cleaner• Two wheel scoop frame

for easy movement• Ready to work with

gun/lance/hose kit • Honda GC OHV

Petrol Engine• 2500 Psi @ 9.5 l/m

flow• Comet Italian

pumpBAR2550B-H $899

PRESSURE CLEANERS

Home 240V Electric Cleaner• Max Pressure 2175 psi• Max flow 8 l/m• 1.6 kW 240V 10amp motor• Made in Italy By Comet• Comes with Turbo Nozzle,

Low pressure det inj• Hose caddy & 8m hose KL1600A EXTRA

$899

$1799

Budget 4000 psi Petrol Cleaner• Powerful 4000 psi

@ 15 l/m• Powerease 15hp

Petrol engine• Comet ZWD plunger pump• 15m hose c/w quick connects• Gun/Lance/Quick change nozzles• Ideal for the serious DIY user BAR4015-R

Great around the home!Great around the

home or workshop!

Semi Professional 240V 10amp Pressure Cleaner• Max pressure 2300 psi• Max flow 10 l/m• 2.2 kW 240V 10amp motor• Made in Italy by Comet• 12m Hose c/w reel• Easy storage of all

accessories suppliedKT1800 EXTRA

Semi professional 240v 15amp Hot Water Pressure Cleaner• Hot water to Max 90°C• Max 2175 PSI @ 9 l/m• 240V 15amp• 2800 rpm Comet

Italian Pump• Brass headSCOUT 150 EXTRA

Ideal DIY hot water pressure cleaner!

$2599

$25

Air Comp Hose Kit 10m Yellow Air Comp hose kit 10mCOA 42.0000.25 JRP1017 10m

$499

12V 56L Spot Sprayers• 4.5m Spray hose• 12v DC pump made in USA• 450mm spray gun

comes with adjustable nozzle

• Drain plug in tank125 90.700.150

$299

Honda Domestic Petrol Cleaner• Honda OHV Petrol Engine• 2400 Psi @ 9 l/m flow• Italian Pump• Supplied c/w hose

gun/lance Assy• Folds for easy storage

– ready to useBEVR2455-HWX

Professional 240V 10amp Pressure Cleaner• Max pressure 1600 psi• Max flow 9 l/m• Industrial quality guns/lances• Brass head plunger pump by

Comet Italy• Auto stop protection• 15m hose and reelK250 9/120 EXTRA

New Entry Level Domestic Cleaner• Powerful 2400 Psi• 8.3 l/m water flow • Powerease 5hp Vertical OHV

petrol engine• Italian Pump• Folds for easy storage

– ready to useBEVR2455-R

$1849

$729

NEW!

Free Turbo

Great around the factory or

workshop!

NEW!

5 Piece Air Comp Kit 5 Piece air tool kit, comes with:• Air paint gun• Tyre inflator• Air blower gun• Air wash gunCOA 42.0090.21 JAT-01

Mobile Engine Drive Air Compressor• 623 FAD / 22 CFM• Genuine Honda GX200

engine• Heavy Duty Cast iron/

slow revving pump• Pressure tanks rated to

10bar – built to AS1210-2010

• 70liter tankCOM P7065-H

$499

$1499

1½ Fire Pump - 7hp Engine • 330 l/m max flow• 55m max head / 7m

suction lift• 7hp Powerease OHV

petrol engine• 1½ Suction / 2 x 1 inch &

1 x 1½ discharge• Supplied in roll frameHP15701-R

Fire Pump Hose Kit for 1½ Pump

• Don’t get caught this summer• 1 x 5m 1½ Grey suction

hose with strainer• 1 x 10m ¾ yellow fire hose

c/w 25mm red fire nozzle• Extra yellow discharge hose

available – ask your store today125 50.100.115

$113

$399

$45

7PRESSURE CLEANERS & FIRE PUMP

8 DRILLING & PAINT

Rust Not• 400 gram Aerosol• Single Pack High Quality Epoxy Enamel

for Interior and Exterior Applications.• Suitable for Metal, Timber, Concrete.• No Primer required for new or lightly

rusted surfaces.White RNW400Black RNB400Satin Black RNSB400Silver RNS400Golden Yellow RNY14400Brunswick Green RNG12400Indian Red RNR64400Signal Red RNR13400Saphire Blue RNB14400Harbour Blue RNB24400Pewter RNN63400

Comfort Grip• High performance Comfort Grip

turns an Aerosol can into a spray gun feel.

• Makes Spray painting fast and efficient.

• Ergonomic quality plastic design provides maximum control when using.

• Finish your job faster and easier.RO241526

Premium quality fully ground M2 HSS Jobber Drill Sets. General purpose drills for use in a wide variety of materials including ferrous and non-ferrous metals, timber and plastic.• Bright finish• 118º split point

M2 HSS Jobber Metric & Imperial Drill Sets.

25 Piece Metric Set1.0 – 13.0 X

0.5mm Rises 2007-M3

$62 $135$28

13 Piece Imperial Set1/16” – 1/4” X

1/64” Rises 2006-F1

21 Piece Imperial Set1/16” – 3/8” X

1/64” Rises 2006-F2

29 Piece Imperial Set1/16” – 1/2” x

1/64” Rises 2006-F3

19 Piece Metric Set1.0 – 10.0 X

0.5mm Rises 2007-M2

12 Piece Metric Set

1.0 – 6.5 X 0.5mm Rises

2007-M1

$125 $62 $28

$28From

Black Gal• 400 gram Aerosol• Anti-Corrosive high quality

Black Zinc Paint. • High Zinc solids protection

with Black finish. • Ideal for touch up coating

for weld areas of steel and galvanised surfaces and Black iron, anodised surfaces.

• Silva Gal also availableBlack BGAL400Silva SGAL400

Super Etch Primer Grey

• 400 gram Aerosol• One Pack Epoxy

Etch Primer with excellent adhesion and anti-corrosion

properties.• For use over Non-

Ferrous materials EP400

Cold Gal• 400 gram

Aerosol• High Quality

Zinc Rich single pack Epoxy

coating for long term protection.

• Replaces corroded or

damaged galvanising

CG 400

$1290$12

Hammercoat• 400 gram Aerosol• Extremely tough & durable

Quick Drying spray finish for camouflaging slightly imperfect surfaces and as a decorative or effects finish.

Silver Grey HCSG400Charcoal HCC400Blue HCB400Dark Blue HCDB400Green HCG400Red HCR400Gold HCGO400Black HCBLK400

$12ea

$1280

$1320ea

$990ea

3 Piece 18V Slide Combination Pack:• DV18DSDL impact

(hammer) driver drill• WH18DSDL impact driver• G18DSL 125mm angle grinder • 2 x 5.0Ah slide Li-ion batteries• Cooling charger• Large site bagKC18DGDL(HJ)

41 Piece Bit & Impact Socket Set

797500

Pedestal Drill Press• 750W (1hp)• 16mm keyed• 210-2580rpm• Laser guide• Belt DriveB16RM

Metal Cut-Off Saw • Including 6 cut-off wheels• 2400W• 14” (355mm)CC14SF-6W

Reciprocating Saw with Tool-Less Blade Change• 1010W• Dust & water resistant • Variable speedCR13V

690W Impact Drill• 13mm keyless• Variable speed• 18mm

concrete capacity

DV18V

125mm Angle Grinder• Anti-vibration handle• Slide switch angle grinder

with carry case • 1200WG13SW(H6)

$749

$660$4990

$359

$199

25mm Die Grinder• 760W• Soft start• Variable speedGP3V(H1)

$369

3.6V Pencil Driver Drill• 6.35mm hex drive• 2 x 1.5Ah Li-ion batteries DB3DL2(HL)

$169

$279

$219

2 Piece 18V Slide Combination Pack:

• DV18DSDL impact (hammer) driver drill

• WH18DSDL impact driver• 2 x 5.0Ah slide Li-ion

batteries• Cooling charger

• Twin tool carry caseKC18DML(HJ)

$599

POWER TOOLS 9

Machine (Drill Press) Vice, Super Grade – 100mm• Accurately machined slide• Corrosion resistant screw and forged handle• Case hardened, replaceable, ‘V’ notched jaws• Vice Jaw Width: 100mm Jaw Height: 37mm,

Max Jaw Opening: 120mm, • Bed Width: 190mm Height: 82mm,

Overall Height: 82mm• ACME thread screw• Weight: 11.6kg60220

$260

3 Pce Dominator Pry Bar Set• All new steel capped end with composite

ergonomically designed handle designed to allow the user to strike the pry bar with a hammer without damaging the head.

• Made from the highest quality alloy and carbon steel, hardened and tempered the full length of the bar,

• Curved blade for extra leverage with corrosion resistant finish

61355 ( 3 piece set: 40140, 40144, 40146 )

$149

Power Bite Heavy Duty Concrete Mesh & Bolt Cutter• Specially designed DAWN Concrete Mesh & Bolt

Cutter has the cutting jaws open on the side of the very flat head, giving better access to cut concrete mesh.

• High quality, heavy duty and durable bolt cutters with induction hardened cutting edges

• Quick, clean cuts for materials that are too tough for standard bolt cutters

• Double cam precision bolt blade adjustment if required

$169 $179Part No Dominator Body Size O.A. Length Weight

40140 7C 10 mm 305 mm 27.50 Kg 40144 12C 10 mm 432 mm 35.00 Kg 40146 18C 13 mm 635 mm 42.00 Kg

Part No. 52790 52900

Length 790 mm 900 mm

HRC 19 9 mm 11 mm

HRC40 8 mm 9 mm

Cutting capacity for material hardness

52790 52900

11kVA Honda Powered Petrol Generator• 11kVA single phase 2 x 15A

outlets • Honda GX630 V Twin engine with

electric start • Long range 27L fuel tank • Popular choice for farmers and

buildersEP11000HSRE

$3999

7kVA Honda Powered Petrol Generator• 7kVA single phase 2 x 15A outlets • Honda GX390 engine with recoil start • Less than 6% harmonic distortion • Popular choice for buildersEP7000HSR

$1699

3.4kVA Honda Powered Petrol Generator• 3.4kVA single phase 2 x 15A outlets • Honda GX200 engine with recoil start • Lightweight, quiet, smooth running• Ideal for small power tools.• 3.6Lt fuel tank EP3400HSR

$990

$549

2.4kVA Honda Powered Petrol Generator• Less than 6% harmonic distortion • Ideal for small appliances and

small hand tools• Lightweight and portable • 2 x 15 Amp outlets EP2400HCR

Water Master 1.5” Honda Powered High Pressure Fire Fighting Pump• Honda GX160 engine• 1” (x2), 1.5” (x1) discharge size • Max. head 74.5m • Max. flow rate 390L/min • Sturdy roll over frameMH15SHP

$1899

2.4kVA Yamaha Inverter Petrol Generator• Will run all

electronic equipment • Perfect for camping,

caravanning & other recreational activities

• 4 year factory warranty

• Extremely quiet • Pure sine wave

EF2400iS

$699

10 GENERATORS, VICE & BOLT CUTTERS

00299

135 piece 6 drawer• 1/4 & 1/2"" Metric & Imperial

Sockets & Accessories• Mirror Polish Imperial & Metric

Combination Spanners,• Soft Grip Pliers, TorqueMaster

Screwdrivers & moreK1604

11INDUSTRIAL TOOLS & EQUIPMENT

Evolve Tool Kits

2 in 1 Magnetic Light & Pick Up Tool • 3 x Bright White LED’s: 18 Lumen /1 LED• Telescopic Length: 175 - 550mm • Flexible Head• 4.1kg of magnetic adhesion

at the base. 2.3kg at the headK8062

$1795

Wrecking Bars• Heat Treated Carbon Steel with Polished Ends • Claw and Chisel End for Lifting and Prying

300mm (12") K9130 $13.95450mm (18") K9145 $18.95600mm (24") K9160 $28.95900mm (36") K9190 $38.95

$1395From

Magnetic Drain Plug Set 15 Pce• 6 x 3/8" Dr Bit Socket Hex: 8 -17

$9995

• 2 x 3/8" Dr Impact Bit Socket Sq: 8 -10

• 6 x 3/8" Dr Socket 13 - 21mm

• 1 x 3/8" Dr Impact Bit Socket Torx: T45

K8157

Tool Trolley 5 Drawer• Ball bearing slides• Aluminium drawer

grips• Reinforced steel

frame• 672mm x 466mm

x 801mm• Weight: 41.5KgK7625

$419

Contour 3 Tier Tool Cart• Size: 755mm x 476mm x 950mm• Ideal for transporting & Storing Tools,

Spare parts, Tool boxes, and more• Suits Contour Chests, Blue Steel Chests,

Evolve Chests and most standard tool chests

K7743

$229

Cargo Case 900mm• External: L 900 x W 470 x H 370mm• Internal: L 820 x W 440 x H 295mm • Will not rust or dent

$249• Steel Kincrome

embossed hasp & Staple (lockable)

• Steel carry handles & hinge

• Resists dust, chemicals & oil

• Weight: 11Kg K7190

Black Chrome Single Way Gear Spanner Set 7Pce Metric • Sizes: 8, 10, 12, 13, 14,

17, 19mmP3100

$89

Measuring Wheels

$129

$115

Fibreglass Tape Reel 50m• 13mm Fibreglass Tape• Double Sided Tape: • Imperial & Metric• High Impact ABS Case• 3x Rapid Rewind K11201

$3995

114 piece Metric only• 1/4”, 3/8”, 1/2” Drive Metric

Sockets & Accessories • Mirror Polish Metric Combination

Spanners• Soft Grip Pliers, Torquemaster

Screwdrivers & more K1606

Extra Long Double Ring Metric Spanner Set• Flex head with

reversible gear• 7 PieceK3077

$279

$799

$999

K11210

K11211

150mm (6")• Zero Point Indicator• 3 Way collapsible from

1m - 42cm• Measures up to 10,000m• Carry Bag included • Zero Reset Button

300mm (12”)• Collapsible Shaft: Folds

in half from 1120mm to 600mm

• Measures up to 10,000m• 10cm Increments • Zero Reset Button• Comfortable rubber

pistol handle with remote counter reset

• Button & brake function

12

Fluorolok Tape Measure • Extended tape mouth, Hi-Viz case• Yellow blade graduated in mm on

both edges• Bright coloured case that stands

out in the tool box

BONUS

By Redemption

TOOLS LATCHES & LASER LEVELLING

Adjustable Over Centre Latch• Adjustable large Over Centre Latch.

Zinc plated • Many applications including trucks,

bonnets, tradesman vehicles, toolboxes & outdoor metal cabinets.

OL414ZP

$490

Flexible Draw Latch • EPDM rubber large draw latch• Dimensions: 130.0mm x 79.4mm• Many applications including trucks,

bonnets, tradesman vehicles, toolboxes

37-10-131-10 $22

Compression Latch• Compression Trigger Latch

110mm x 50mm. Grip 14-29mm• Stylish, high quality original

Southco part. Suitable for many applications including toolboxes, tradesman vehicles, trailers.

C5-31-25

Positive Lock Pin• ½” diameter;

3” effective length• Many applications

requiring quick release for easy fastening including trucks; tradesman vehicles; motor homes

PL8-3000

$39

$46

Auto Levelling Dot & Line Laser• Switch between Lines or Dots• Levelling, Alignment and Plumb• Includes Magnetic Base• Also includes Laser Target & Glasses

Laser Distance Measure• 40m indoor range• Area and Volume

Calculation• Indirect Height• Min Max

Measurement• Carry case

LI-40

Electronic Levelling Rotating Laser package• Electronic Auto Levelling• Also includes Ni-mh rechargeable batteries• Horizontal Rotation for Levelling• Vibration and TILT settings• Includes LR715 electronic receiver

• Hard Shell Carry CaseEL614P

$299

40pce Ratcheting Tap & Die Set Metric• Ratcheting drive tool

with reversible action• Auto locking feature

allows for safe removal of tap adapter works on round and hex shaped dies

40pce, Metric 3886 $7940pce, SAE 3885 $7975pce, Metric/SAE 3887 $149

$79From

Auto Levelling Rotating Laser Package• Includes LR710 electronic receiver• Horizontal Rotation for Levelling• Vertical Rotation for Alignment• Package include Heavy

Duty Tripod and 2.4m Staff• Auto LevellingAUTO1P

$399• Auto Levelling• Hard Shell

Carry CaseDLD3

$999

Indexing Extendable Pry Bar• 14 Locking Head Positions for Unmatched Access• Grooved Head Profile Provides Additional Traction• Head Indexible Through 180°

for Greater Leverage18”- 29” 82220 $59.00 29”- 48” 82248 $139.00 $59

From8m 100192 $22.008m/26’ x 25mm FL48ME10 $22.00

$176

12 Pce Open Ended Ratcheting

Wrench Set• Allows ratcheting of

nuts and bolts without removing wrench from

fastener• Ratcheting speed with

the access of an open end wrench 5° Swing Arc

85597 $22ea

ADHESIVES

Loctite 620Recommended for high temperature retaining of parts with a clearance or interference fit, e.g. retaining bushes, bearings, seals, fans and liners.

10ml 62015 $14.5050ml 62050 $37.00250ml 62070 $159.00

Loctite 648 - 50ml

A retaining compound recommended for

continuous working temperatures up to

180 degrees. Fills gaps up to 0.006 in

diametral clearance. Fixtures in 10 minutes

45431

$37

Loctite 635 Recommended for high

strength retaining of parts with a clearance

or interference fit, e.g. retaining bushes,

bearings, seals, fans and liners

50ml 63531 $38.50250ml 63541 $159.00

Loctite 680 Gives best resistance to dynamic, axial and radial loads. Recommended for retaining shafts, gears, pulleys, and similar cylindrical parts. Approvals: Plumbing Safety Licence: 4020:2002 Cert No. 8687 (Potable Water)

50ml 1878433 $34.50 250ml 1878498 $145.00

Loctite 609Recommended as a general purpose, low viscosity retaining compound. Use to bond rotors to shafts, secure bushings and sleeves and augment press fits.

10ml 30013 $11.0050ml 30015 $34.50250ml 30014 $145.00

$3850From

$3450From

$11From

$1450From

Loctite 641A controlled strength retaining compound ideal for cylindrical parts that require disassembly; e.g. retention of bearings onto shafts & into housings.

10ml 21314 $12.00 50ml 45079 $37.00 250ml 45081 $145.00

$12From

Loctite 660 Used for repairing work coaxial parts without re-machining. Enables reuse of work bearing seats, keys, splines, tapers, or for retaining shirns.

6ml 66010 $8.0050ml 66040 $43.50

$8From

Loctite 232 - 250mlHas lubricating properties to faciliate smooth assembly of heavy interference or high torque fits. Prevents galling and metal pick-up during assembly. 44324

$185

13

14 CLEANING, BRUSHES & GAS TORCHESScrubber Hand Cleaner• Removes grease, diesel, oil, tar,

adhesives in a flash• Contains fine Italian pumice• Contains lanolin• Aussie Made & Owned

Orange Pumice Hand Cleaner• Pure citrus base• Contains fine Italian pumice• Ideal to remove grease, oil,

adhesives, paints in a flash• Aussie Made & Owned

4kg Scrubber 390I $2520kg Scrubber 390J $99

500ml Orange Pumice 899c $6.504L Orange Pumice 899i $3520L Orange Pumice 899J $105$650

From

$25From

Euca Laundry Powder• Commercial quality ideal

for work and hi vis clothes• Ideal in top, front loading

machines, hot or cold wash• No fillers, synthetic

perfumes or petrochemical surfactants

• Excellent cost per wash106VFFT

$55

Josco Premium Cup Brushes• Twist knot steel

wire ideal for hard aggressive brushing and contaminant removal

• Great for scale, rust and paint removal

Josco Carbide BurrsPrecision cut & ideal for cutting stainless and carbon steel or other hard metalsJBS4

Brushwork Hearth BrushJava filled, heat resistant & ideal for brushing away hot embers and sparks711010

Superboss BroomHeavy duty broom with plastic back and java fill602124

$4990

$650$95

75mm 30g 166BMCARD $25.0075mm 26g 166MCARD $25.00

$25ea

Gas Power Torch w/ bonus Pocket Torch• Auto Ignition• Refillable with Butane Gas• Adjustable Flame• Torch Temp 1300CPB6050B

Micro Gas Torch• Auto Ignition• Refillable with

Butane Gas• Extended Burner Head• Safety Lock• Includes bonus 20ml

Butane Gas Refill Cartridge

HD3100

Map/Pro Torch Kit with Pistol Grip Head• Auto Ignition• Stainless Steel

Burner Tube• Tough ABS

Plastic Handle• Lightweight /

Easy to useHD8921B

$2495

$75

$1295

Compact 2500 Electric Direct Drive• Free Air Delivery

@ 100PSI: 154LPM 2.5HP, single phase – 10Amp motor

• Designed for handyman use• Warranty: 1yr total unit• Pump RPM: 2850• 30 litre air receiver• Amps Draw: 8• Max PSI: 14500332

P17 Electric Belt Driven Compressor• Free Air Delivery @ 100PSI 320LPM• Filter Regulator c/w Automatic Drain• Warranty: 5yr pump, 1yr motor• 3.2HP, single phase • 15Amp motor• Pump RPM: 963• Amps Draw: 13• Max PSI: 145• 55 litre air receiver00087

PV25 Industrial 3 Phase Compressor• Free Air Delivery @ 100PSI: 545LPM• 2 cylinder, slow revving, cast iron pump• Warranty: 3 yr pump, 1yr Motor• 5.5HP 3 phase motor• Pump RPM: 1154,• Amps Draw: 6.6• 110 litre air receiver• Max PSI: 14500555

PHP15FB Fatboy Compressor• Free Air Delivery @ 150PSI: 300LPM• 3.2HP, single phase – 15Amp motor• Warranty: 5 Year Pump, 1yr Motor• Pump RPM: 1132• Maximum PSI: 175PSI• Amps Draw: 13• 110 litre air receiver00105

P14 Electric Belt Driven Compressor• Free Air Delivery @ 100PSI 275LPM• 2.75HP, single phase – 10Amp motor• Warranty: 5 year pump, 1yr motor• Pump RPM: 852• Amps Draw: 9.4• Max PSI: 125• 55 litre air receiver00257

$1169

$1050

$1450

$1975

Compact 5000 Electric Belt Drive Compressor• Free Air Delivery @ 100PSI: 235LPM• Filter Regulator c/w Automatic Drain

2.5HP, single phase• Warranty: 3yr pump, 1yr motor • 10Amp motor• 40 litre air receiver• Amps Draw: 9• Max PSI: 145• Pump RPM: 116000334

$250

$95

$745

with 180 degree mounting bracket, complete with carry handle, 1.5M connection hose, 1M click lock system

00147

8” Bench Grinder • Complete with light

• Ideal for the home handy man

• 3/4HP Motor• Warranty: 1yr total unit • 550 Watt

00271

20 Metre Retractable Hose Reel• 20 Metre 3/8” High Pressure Air Hose,• With ¼” BSP Fittings. • Self-levelling device to prevent jamming

upon rewind. • UV stabilized plastic moulding, complete

BONUS$1940

P17P Petrol Compressor• Free Air Delivery @ 100PSI: 350LPM• 2 cylinder, slow revving, cast iron pump• Warranty: 5yr pump, 3yr Honda• 6.5HP Honda engine• Pump RPM: 1061• 68 litre air receiver• Max PSI: 14500128

BONUS

BONUS

BONUS

BONUS

20M Air HoseWith every Belt Driven Compressor!00348

$175

15COMPRESSORS

$499

1516B Bench Drill• 3/4HP motor• 16mm Chuck• 16 Speed• 2 Morse Taper• Min RPM: 160

Max RPM: 3100• 381mm swing• hole size

3 -16mm• Warranty:

3yr00298

1316P Pedestal Drill• 3/4HP motor• 16mm Chuck• 12 Speed• Hole size 3 -16mm• Min RPM: 180

Max RPM: 2740• 2 Morse Taper• 330mm swing• Warranty: 3yr00299

$499

BONUS

16 GREASE, METAL PROTECTION & INDUSTRIAL

DEVCON Plastic Steel Putty (A)• Applies easily - no special tools required• Bonds to steel and many other metals,

as well as concrete• Patching of castings, making jigs

& fixtures• Repair of worn or

fatigued metals• Rebuilding bearing

journals and raceD10110

GALMET Cold GALMET Duragal®• 400g Aerosol• Organic zinc-rich protective

coating• Designed for long term

protection of iron and steel against rust and corrosion

• Provides a long lasting barrier similar in action to galvanizing

• 92% zinc in dry filmGGDSA

Galvanizing• 400g Aerosol• Organic zinc-rich protective

coating• Designed for long term

protection of iron and steel against rust and corrosion

• Easily applied to difficult areas

• Prolongs tool & die life

• Improves thread & surface finish

• Excellent penetration into deep holes and slots

• Prevents welding – ideal for difficult metals

• NZFSA Approved C14 (All animal product except dairy)

• 500mlRY550171

ROCOL RTD® Metal Cutting Liquid

• Semi-fluid grease spray containing molybdenum disulphide

• Penetrates to the wire rope core

ROCOL Wire Rope Spray

• Protects against wear and corrosion

• Suitable for all environments including marine and mining

• 300g aerosolRY452412

• Fast penetration to the pins and bushes.

• High water resistance.• Thin residual film ,which

will not drip or throw off.• Minimum pickup of

surface dirt and fibres.

ROCOL Chain & Drive Spray

• Jet spray for easy application.

• Ideal for drive, steering, conveyor, hoist and forklift chains.

RY442352

• Food grade ingredients• Excellent water

resistance• Good adhesive properties• High corrosion resistance• Jet spray for easy

application

ROCOL White Chain & Drive Spray

• NZFSA Approved C12 (All animal product except dairy)

• NZ AsureQuality Approved

• FDA Group 21 CFR 178.3570

RY442330

• Extends lubrication periods

• Good adhesive properties

• High load carrying capacity

• Temperature range up to 180°C continuous and +200°C intermittently

• NZ MAF Approved C12 (fish, game, meat)

• 400gmRY424851

ROCOL Sapphire Ultraplex

$1660

• Provides a long lasting barrier similar in action to galvanizing

• 92% zinc in dry filmGGCGA

$27$2850$2150$2950

$1675$1450

Holemaker PRO35 Magnetic Base Drill• Quality compact & robust

European made machine• Comes complete in metal

carry case• Magnetically attached

through cutter coolant system

• Lightweight, Only 10kg! • 35mm Diameter, 52mm

Depth Cutter CapacityHMPRO35

Cutter Set14, 18, 22mm cutters & pin ASSET-A

Holemaker Industrial Arbor• Adapt your drill press or lathe

to use Holemaker annular cutters• Time savings in excess of 40%

$250

Drill Doctor 360X Drill Bit SharpenerSharpen drill bits as easily as you sharpen pencils• 2.5mm - 13mm Drill Bit Capacity• Diamond Sharpening Wheel• 118º Sharpening Angle • 240V MotorDD360X

Ehoma C Clamps – General Purpose• Tempered and hot forged steel for rigidity• Nickel and chrome plating for high corrosion resistance

Part No Span x Depth Clamping Force (KGP) Price

EC-BC4 100 x 50mm 900 $36.50 EC-BC6 150 x 75mm 1000 $45.50 EC-BC8 200 x 100mm 1000 $57.00EC-BC10 250 x 115mm 1200 $72.50EC-BC12 300 x 125mm 1500 $89.90

$195

BONUS

$995

LED Flashlight Alluminium Body

with Magnetic Telescopic Pick-Up

BONUS

• Economical compared with conventional methods

• Large cutting capacity up to 150mm diameter

• Morse Taper: #2MT• Max Depth of Cut: 50mm• To Suit Shank Size: 3/4”SAIA2S

$3650From

$105

Press Vice150mm

BONUS

16mm 16 Speed Bench Drill

$395

20mm 12 Speed Floor Drill

• Motor Power 450W• 16 Speed 180-2770• Height(mm) 1000• N.W./G.W. (kgs) 60/ 63• Drilling Capacity

16mm (5/8”)• Chuck 3-16mm #2MTTD1416

BONUSPress Vice150mm

$590

• Drilling Capacity 20mm (3/4”)

• Chuck 5-20mm #2MT• Motor Power 750W• 12 Speed 280-2380• Height(mm) 1600• N.W./G.W. (kgs) 80/84 TD1420F

17DRILLING & FILE

The blue finish reduces chip build up on the cutting edge and is a better choice when drilling ferrous materials.

$145Imperial 29 Pce

$69Imperial 21 Pce

Metric and Imperial Drill Sets

$69Metric 19 Pce

$135Metric 25 Pce

General Engineering:• Holesaws: 19, 22, 25,

32, 35, 38, 44, 51, 57, 63 & 76mm

• Arbors: 1 x QF1 arbor, 3 x QF4 adaptor

• Pilot Drill: BD26 (1/4” x 105mm long)

#14 Set 11pc Cobalt H105S14

Holesaw H105 SetsGeneral Engineering:• Holesaws: 16, 19, 22,

25, 29, 32, 35, 38, 44 & 51mm

• Arbors: 1 x QF1 arbor, 5 x QF4 adaptor

• Pilot Drill: BD26 (1/4” x 105mm long)

#5 Set 10pc Cobalt H105S5

Electrician Set :• Holesaws:16, 20, 25,

32, 40 & 51mm• Arbors: 1 x QF1 arbor,

3 x QF4 adaptor• Pilot Drill: BD26

(1/4” x 105mm long)#9 Set 6pc Cobalt Elect H105S9

• Reduces torque and friction• Extends tool life• Improves surface finish• Accurate thread quality• Environmentally friendly

mineral oil base with 10% organic coconut oil. Free from Trichloroethane - low odour.

• Available in 250ml or 4L

Cutting & Lubricating Fluid M800

• Right Angle Attachment• 25mm insert bit Torsion

Phillips #2• 25mm insert bit Hex

5mm 50mm Torsion Phillips #2• 50mm Square Recess R2107RAD001

Right Angle Drill ATT HD

• Compact storage ideal for your tool box or workshop.

• Flat, half round, round, square x200mm.

300SET004

File Set 4Pce• Flat, square, round, half round x160mm• File handle warding-flat, three square 386911607

Needle File Set 7Pce

$29 $49

M8004000

$1204L

$12250ml

M8000250

$4990

$230$260$160

1/16-3/8 x 1/64ths D102S2

1/16-1/2 x 1/64ths D102S3

1.0 - 10.0 x 0.5mm D102SM2

1.0 - 13.0 x 0.5mm D102SM3

18 LUBRICATIONMX3-300• The original and the best.• Displaces, Penetrates,

Lubricates & Protects• Non-conductive,

non-static, non-toxic, non-corrosive and non-staining

MX3-300

MX3FG-300• Holds the NSF H1 food

grade certification• Can come in full

contact with food• No odour, non-toxic,

non-static, non-corrosive non-conductive and non-staining

MX3FG-300

MX4-300• Anti-corrosive Lanolin

lubricant.• Made using double

screened Lanolin, giving you superior quality.

• Excellent on all marine equipment.

MX4-300

MX6-250• Perfect for use as a rubber grease• Holds the NSF H1 food grade approval• High temp no meltMX6-250

$990

$1090

$980MX3-750Your favourite lubricant in a new 750ml sized handy pump pack!MX3-750

$1190

$1490

$1680ea

Molykote CU7439 High Performance Anti-Seize Spray

Molykote® MKLN High Performance Chain GreasePenetrates, protects & lubricates.Delivers excellent internal lubrication,good adhesion, and wash-outresistance. Temp. -25 to +160°C.Application Solutions:• High speed high load chain drives.• Excellent adhesion penetrates

with low viscosity carrier delivering adhesive grease and lubricating solids.

• Reduces wear and corrosion.• Extends chain life.• Provides top grade chain lubrication

in a can.400MLMKLN

$2395 $1520

Molykote® PTFE-N SprayA translucent dry film anti friction coating (AFC), with extremely low coefficient of friction. Air drying lubricant, non staining, providing excellent adhesion, long term lubrication

and reduced friction and wear. Temp. -180 to +240°C.

Application Solutions:

• Suitable for rubber guides, sliding, doors, sunroofs, hinges, windows,

• Small mechanisms in office equipment, electrical & homeappliance industries.

400MLPTFE-NUsed for components subjected to high temperatures high pressures & corrosive influences

• Excellent temperature range (-30ºC to +300ºC ) to +650ºC as a solid lubricant

• Low evaporation• No drop point• High performance lubricating

paste with synthetic combined oil, powdered copper, additives plus superior corrosion inhibitors

• Well suited for all components which need to be protected against water, steam and corrosion

• Flange seals, exhaust bolts, brake mechanisms

• Extremely adhesive paste performs in the most severe adverse environmentally exposed

400MLCU7439

MX4-750• New handy sized

pump pack.• Perfect for all marine

applications• Won’t affect rubberMX4-750

$1790

18

19

Sandblasting Cabinet• Heavy duty foot valve assembly with steel housing and high

production brass flow valve• Internal working cabinet: 1200(W) x 600(H) x 570(D)mm• Abrasive large particle separating screen and clean out door• Heavy Duty 14 gauge steel legs & 16 gauge panels• Pistol grip blasting gun• Window Size: 570 x 270mm• Working pressure: 60-125psi• Air regulator & gauge panel• Natural rubber / vinyl blaster gloves• Perforated steel flooring• Powder coated inside and out• External fluorescent lighting

system (2 x 18w)• Overall Dims: 1700(H) x 1300(W)

x 900(D)mm• Net weight: 140kg3031

Industrial Wall Mounted Fan • Fan Blade: 3 Blade Solid

Steel 750mm Diameter

Industrial Pedestal Fan• 240/50Hz 380 Watt• 3 Speed Motor• 750mm Solid Steel 3

Blade Fan• Cast Iron Base for

Stability• Airflow: 300m³/min• 0º to 90º Oscillating

Angle or Fixed• Adjustable Height

– 1235 to 1760mm (Blade Centre)

• Metal Oscillating Gears• Nett Weight: 27.5kg1015

Industrial Pedestal Misting Fan – 650mm

• 90º Oscillation • 3 Speed, 270 Watt

• Adjust. Mist – Exit Vol: 0 – 16Kg/Hour

• Water shortage protection• Suited to cooling people,

stockbreeding or greenhouse applications

1182

Sandblasting Tank• 37.85 Litre (10 Gallon) Capacity• Includes Safety Mask, Thread Tape &

Sand Funnel• Working Pressure: 60-125psi• CFM: 6 to 25 @ 125psi (Dependent on

Nozzle Size)• Sand Use: 27-90kg/hr (Dependant on

Nozzle Size)• Hose Length: 3m• Dimensions Tank: (H)508 x (Ø)305mm• Net Weight: 18kg• Comes with a Regulator

Porta Power Kit• Overall Carry Case

Dimensions: 750 (L) x 390 (W) x 170 (H) mm

• 14 Piece Kit containing Pump, Hose & Fittings

• 10,000kg Safe Working Capacity

• Contained in Sturdy Plastic Carry Case

12v/24v Dual Voltage Jump Starter• Cranking Amp: 900A 12V / 400A 24V• Peak Amp: 3000A 12 / 1500A 24V• Battery Type: 2 x 18AH sealed lead acid

• Internal battery status display: Color code voltmeter

• Power Outlet: 1 x 12V• Built in LED work light5054

3 Tier Service Trolley • Tray Dimensions: 735(L) x

410(W) x 915(H)mm• 100Kg Capacity• 75mm Soft Castors• Net Weight 14.6Kg6004

Air Hydraulic Bottle Jack • Safe Working Capacity 20,000kg• Minimum Height: 265mm• Maximum Height: 510mm• Hydraulic Lift: 160mm• Adjustable Height: 85mm• Air Pressure: 90-120psi• Air Fitting: 1/4” NPT• Nett Weight: 16.3kg2026

• Maximum Lifting Height: 150 mm• Cylinder Minimum Height: 367 mm• Net Weight: 37 kg2005

$89

$349

$249

$199

$169 $169

• Heavy Duty Wall Fixing Plate

• Oscillating: 0-90°• 240v / 380w /

½ HP• Weight: 18kg• 300 m3/min• Speeds: 31026

• 4x Ceramic Nozzle Tips 2.5, 3.2, 3.8 & 4.5mm

• Replacement Ceramic Tip Set Available (4pkt)

3008

$1795$275

WORKSHOP EQUIPMENT & FANS

$595

POLIFAN® Flap Discs (Zirconia)• High stock removal

and long product life• Suitable for

more demanding applications

• Performs well in edge grinding high load applications

40G 67764125 $5.9560G 67766125 $5.9580G 67768125 $5.95

5 & 10 Piece Tungsten Carbide Burr Sets• Allows the operator to work more safely• Reduces tool drive wear• Increases stock removal• Prevents chatter marks• Provides smooth

operation action

$24510Pce Set

26005694

$1255Pce Set

26005693

$595125mm

Ultra-Thin Cutting Wheel – INOX• Manufactured without addition of ferrous,

sulphurous & chlorinated fillers• Suitable for cutting of metal, sheet profiles

& solid materials• For use on stainless steel

EHT 105 69120933 $2.00EHT 115 61340412 $2.20EHT 125 61341112 $2.30

$2From

$690

General Purpose Chop Saw Cutting Wheel• Excellent cutting results on machines, up to 3KW output

• Suitable for cutting of solid material, sections & pipes• INOX also available for stainless steel

• 350mm x 2.8mm66323574

Portable LED Floodlight / Mains Lead720Lm FL10WFL $391440Lm FL20WFL $592100Lm FL30WFL $85

Rechargeable LED Floodlight

720Lm RCT10WLi $58

1300Lm RCT20WLi $125

Wall Mount LED Sensor Light/Mains Lead720Lm FL10WPIR $421440Lm FL20WPIR $68

Twin LED Tripod Floodlight / Mains Lead1440Lm FL2X10WTRI $902880Lm FL2X20WTRI $140

Wall Mount LEDFloodlight/Mains Lead720Lm FL10WWM $291440Lm FL20WWM $542100Lm FL30WWM $75

$39From

$58From

$42From

$29From$90

From

20 LIGHTING & ABRASIVES

$4450

Pistol Grease Gun• Heavy duty aluminium die cast head with

non-slip textured powder coated finish and plated pistol handle

• 1/8” BSPT• With 100mm (4”) steel extension, 300mm

(12”) flexible hose & 4 jaw coupler• Cartridge capacity 450g305221

Pneumatic Grease Gun• Intermittent operation with a single

shot of grease discharged with every squeeze of the trigger

• Complete with flexible hose 300mm (12”) and 4 jaw coupler

• Cartridge capacity 450g305223

Suction Gun• Designed to transfer gear oils in and

out of gear boxes, transfer cases and differentials

• Lip seal provides maximum suction• Powder coated, textured steel barrel for

firm grip• No priming required• Suitable for use with non

corrosive liquids• Capacity 500ml305227

Lever Action Grease Gun• Designed for continuous and demanding

industrial applications• Textured powder coated finish for non-

slip grip• Output: Delivers 1g per stroke (1oz per

28 strokes)• Pressure: 69,000 kPa (10,000 PSI, 690

Bar)• Cartridge Capacity 450g• Bulk Capacity 650cm³305219

$8595

$3950

$1995

Drum Pump Rotary• Suitable for transfer of diesel, kerosene,

heating oils, motor oils, lubricating oils (up to SAE 90) and non-corrosive fluids of light to medium viscosity

• With telescopic suction tube• Hi Nitrile rubber seals• Fits 50 litre to 205 litre drums• Output: 5 Litres per 20 turns 305251

Bucket Greaser Lever Action• Designed for high volume, high pressure

applications where rapid volume greasing is required

• Pump constructed from heavy-duty cast iron

• Includes spring loaded steel follower plate for removing air pockets from grease

• Complete with 10kg (22lb) in built steel grease bucket

• Output 4g per stroke305220

Lever Action Drum Pump• For use with oil based fluids,

heating oils, motor oils, heavy and light oils

• Fits 50 to 205 litre drums• Not recommended for use with

water based fluids,solvents, acids & anti freeze

• Output: 300ml (10oz) per stroke

• Complete with a curved spout and telescopic suction tube, 38mm (1 1/2”) and 50.8mm (2”)bung adaptor

305252

$8995

$19995

$5995

Ezee Flo Pump 20L• A versatile hand lift pump for trouble

free use on 20L• (5 gallon) containers with Rieke or

regular opening• Complete with rigid and flexible hose

and spout• Heavy duty steel suction tube with

the pump head made from high density polyethylene

• Pump Length 325mm• Output: 1 litre (1 quart) per 15 strokes305255

$4450

GREASE GUNS & DRUM PUMPS 21

22

Maxigear Twin Pack Deal• 16pc METRIC Ratcheting

Combination Wrench Set• 13pc SAE Ratcheting

Combination Wrench Set• 1/4’’ – 1’’ Supplied in a

rugged wrench rack• 8-24mm Supplied in a

Canvas Roll• 5° Ratchet ANSI &

DIN StandardMGC4090P

$259ea

30 LED Light• 12v & 240V

Chargers• Run time up

to 5 hoursPST-75520

$99ea

Verniers De-Burring Set & Engineers Square• Digital verniers• Triple Read• 150mm Engineers square• 10 x Noga de-burring blades• 1 x Noga de-burring tool handleMAXIPACK1025

$99

Electronic Digital Caliper 799 series

$62Dial

Indicator• Long life jewel

bearings• Tolerance hands

and bevel lock• Lug on centre back

• Range 0 – 10mm• Graduation 0.01mm

3025-481

Magnetic Base• Fine adjustment

indicator holder• Positive On/Off switch• Suits all Starrett test,

dial & AGD indicators• Holds 8mm, 9.5mm or

3/8” stem indicators or dovetail mount

3657AA

$135From

• Instant inch/mm conversion• Zero reading at any position• Fine adjustment thumb wheel• Light weight, ergonomic design• Large easy to read LCD screen• Hardened stainless steel

measuring jaws• Auto off after 5 minutes• Graduation 0.0005” 0.02mm• 24”/600mm and 40”/1000mm

also available0 – 6”, 0 – 150mm 799-6/150 $135.000 – 8”, 0 – 200mm 799-8/200 $178.500 – 12”, 0 – 300mm 799-12/300 $245.00

$7950

Western Red, Premium Welders Glove • Selected Premium Grade

Split leather • Sewn with Heat

Resistant Kevlar® thread

5X8 Premium Safety Glasses• AS/NZS 1337.1.2010 Certified• Sporty wrap-around design with

Patented Softpad Technology• Adjustable inclination for arms –

ratchet technology• Soft Silicone nose pads• Hard coated lens for Anti Scratch.• High quality Anti Fog coating for

long lasting protection.• 99.9% UV protection • Made in Italy EUV326

EUV327

Professional Respiratory KitsWelders Respiratory Kit RRS01WK-L $60.00Painters Respiratory Kit RRS01PK-L $71.00Chemical Respiratory Kit RRS01CK-L $75.00

• Reinforced Palm and Thumb

• Full Flame Resistant Jersey Lining

• Wear Seams Welted for extra strength

• Length 406mm longGWR162

$1190

$675 $60From

TOOLS, MEASURING & SAFETY EQUIPMENT

23

Razorsheild Auto Goggles• Reaction Time: 0.05ms• Sensors: 2 x Independent• Shade: 5-7-9-11-13• Sensitivity Setting: Adjustable• Delay Control: Adjustable• Power Supply: Battery, Solar Cells• Operating Temperature:

-10°C to 55°C• Standards:

ANSI Z87.1 / DIN / CE / TUV

• Warranty: 2 Year Date of Purchase

KUMRS

Unitig 170 DC Inverter C/W Leads & Case• Latest IGBT inverter technology• MMA

- Hot start (improves electrode starting) - Arc Force (boosts current to prevent electrode extinguishing) - Excellent arc stability with all electrodes

• DC TIG - Lift Arc ignition (prevents tungsten sticking during arc ignition) - Ultra smooth DC TIG welding current

KUMJR170CA

15

Razor weld •

3 Years Warranty

UNIMIG WARRANTY (Power Source only

)

MACHINE PACKAGE: KUMJR170CA MMA option includes: ARC170 Machine, Earth Lead & Arc Lead 16mm x 4m, PVC Carry Case

MACHINE PACKAGE: KUMJR170CT TIG option includes: ARC170 Machine, Earth Lead & Arc Lead 16mm x 4m, 17V x 4m TIG Torch, UNI-FLAME Argon Flowmeter Regulator and PVC Carry Case

Technical DataPower Supply / Phases (V-Ph) 240V - 1 ±15%Rated Input Power (KVA) 7.7Ie� (Amps) 15ARated Output 170A/26.8VWelding Current Range 10~170ANo-Load Voltage (V) 80Duty Cycle @ 40ºC as per AS/NZ60974-1 25%@170Amps MMA 35%@170Amps TIG E�ciency (%) 85Power Factor 0.70Protection Class IP21SInsulation Class FSize (mm) 320 x 120 x 210Weight (kg) 5.2Warranty 3 years on power source

ARC170CTTIG Option

ARC170CAStandard Package

Overview The ARC170 is an inverter-based welding machine produced using the latest in IGBT technology. This machine is portable, reliable, robust and stacked with features that you can expect from a quality welder. The DC MMA welding capability delivers a smooth and incredibly stable arc allowing easy welding with electrodes producing high quality welds including cast Iron, stainless and low hydrogen. The ARC170 is equipped with DC Lift Arc function, connection of the 17V TIG torch allows quality DC TIG welding of steel, stainless steel, bronze and copper. The Lift Arc function is superb and delivers perfect arc ignition every time without any sticking of the tungsten electrode to the work piece, a remarkably smooth stable arc produces high quality TIG welds. The ARC170 is an exceptional machine that is suitable for a wide range of applications including industrial use, site welding, farming, along with repair and maintenance applications. The Arc170 is packaged in a tough PVC carry case with your choice of MMA option accessories or MMA/TIG option accessories. The ARC170 gives you the best of both worlds great portability, with the power to get the job done.Built to our speci�cation and manufactured in compliance to AS/NZ60974-1

UNIMIG ARC 170MMA/TIG - 170 Amp DC Inverter WelderWelds: Steels, Stainless, Cast Iron, Bronze, Copper

Features• Latest IGBT inverter technology• MMA - Hot start (improves electrode starting) - Arc Force (boosts current to prevent electrode extinguishing) - Excellent arc stability with all electrodes • DC TIG - Lift Arc ignition (prevents tungsten sticking during arc ignition) - Ultra smooth DC TIG welding current• Thermal overload protection• IP21S rating for environmental/safety protection• Generator compatible (recommend 8.0 KVA minimum)• Tolerant to variable power supplies

Industrial Rated 240V Single Phase 170 Amp DC Welder Small, Lightweight and Portable

15

15 AMPRazor Weld 165 Invertera• Euro style MIG

torch connection• Internal wire feeder• 1Kg to 5Kg Spools• Adjustable Burn Back• Spool Gun Connection• Latest IGBT inverter technology• Stepless voltage & wire feed control• MIG/MAG with Gas and Gasless wire function• Excellent MIG welding with CO2 gas & mixed gasKUMJRRW165MIG

Razor Weld 205 Inverter• Euro style MIG & TIG

torch connection• Internal wire feeder,

gear driven• 1Kg to 5Kg Spools• Spool Gun Connection• Wire Inch• DC TIG with lift ARC

ignition• Latest IGBT inverter

technology• MIG/MAG with Gas and

Gasless wire function• Excellent Mig welding

with CO2 gas & mixed gases

KUMJRRW205MIG

Anti Spatter Spray• 280 Gram Can UNIMIG Anti-Spatter Spray is

engineered to protect parts, tooling, and fixtures from spatter build-up. A convenient solventbased, quick-drying aerosol that allows for pre-heat, higher duty cycles, and higher temperature applications. Excellent for fixture and tooling protection.

• Product is for industrial and professionaluse only. Use only in a well-ventilated areas

AS400

Razor Weld 200 CA Inverter• Single PCB construction• PFC ( Power Factor Correction)

for maximum electrical efficiency• VRD (Voltage Reduction Device)

- Arc Force (boosts current to prevent electrode extinguishing) - Excellent arc stability with all electrodes - Hot start (improves electrode starting)

• Thermal overload protection• IP21S rating for environmental/safety protection• Generator compatible (recommend 7.0 KVA minimum)KUMJRRW200CA

Razor Weld 200 DC Inverter• Latest IGBT Inverter Technology• Digital Weld Program Sequence Control• DC TIG (DC tungsten inert gas welding)

- HF Arc Ignition (prevents tungsten inclusion & tungsten damage) - Adjustable Pulse Frequency 0.5 - 200Hz - Peak Current, Base Current and Pulse

• Width Adjustment - 2/4T Trigger + Spot Time Adjustment - Start & Final Current Adjustment - Pre and Post Gas Flow Adjustment - Up and Down Slope Adjustment - Remote Torch Amp Control

KUMJRRW200DC

Welding BlanketLightweight, soft and flexible welding blanket material, providing incredible ease of use, while withstanding high heat. 31666

Straight Line Cutter

Automatic single blowpipe straight

line gas cutting machine

CG-30Razorweld Auto Helmet

• Grind Mode: Yes• Light Mode: Shade 4• Weld Mode: Variable

Shade: 9 -13• Viewing Field: 100mm x 60mm

• Sensors: 4 x Independent Photo Sensors

• Warranty 2 Year Date of PurchaseUMRWWH

$275

$5

$185

$299

$675

$995

$725

$1180

$195

$520

Uniflame Professional OXY/ACET Kit• 1 x Heavy Duty Tool Box, 1

x Heating Tip, 1 x Oxygen Regulator, 1 x Welding / Cutting Goggles

• 1 x Acetylene Regulator, 1 x Tip Cleaner Set

• 1 x Blow Pipe Handle, 2 x Oxygen Regulator Flash Back Arrestor

• 1 x Cutting Attachment, 2 x Fuel Gas Regulator Flash Back Arrestor

• 1 x Mixer, 1 x Combination Spanner

• 3 x Welding Tips Type 41 No’s 8/12/15, 1 x Radius Bar and Pivot

• 3 x Cutting Nozzles Type 41 No’s 8/12/15, 1 x Roller Guide

KKOXY1

$425

WELDING & ACCESSORIES

5 Piece SetSB-3, SC-3, SC-5, SF-3, SF-5 Double Cut

Carbide Burr Sets -Made in USA¼” Shank Premium Industrial Quality

Hi-Tensile Black Panther Industrial Snip• 85mm, high tensile Stainless Steel

serrated edged blades for superb durability• Most suited to heavy duty cutting• Comfort grip ergonomically

designed handles

Black Panther Industrial Snip • Ideal for multiple applications• Comfort grip ergonomically

designed handles• Stainless Steel serrated

edged blades• Ideal knife replacement tool

BURRSET1

$1255Piece

BURRSET3

$2658Piece

Retractable Utility Knife115-1Y

Stealth Pocket Knife c/w 5 free blades3038

Zebra 18mm Large Screw-Lock CutterComfortable, Secure Grip 580-1

$1995200mm

$950

$1895

$98 Piece Set SA-5, SC-5, SD-5, SF-5, SG-5, SH-5, SL-4, SM-5 Double Cut

$1655185mm

29-701

29-700

Sandblast Cabinet • Heavy-duty steel cabinet• 835 x 510 x 360-550mm blast area• Includes light,

tempered glass screen, gloves gun, ceramic nozzle, stand & hopper.

S289

Bag Garnet

Portable Video Palm Inspection

Camera• Includes magnetic pick up, mirror tool &

carry case• 9mm camera with

600mm cable• LED lighting,

53 x 40mm screenM696

Shelving Flexi Rack 4 x Wood Shelving• 455kg Shelf Load Capacity• 1040 x 430 x 1830mm• 4 shelves made from

16mm thick particle board• Can be configured as a

work bench styleS013

Industrial Shelving 4 Shelves 364kg / shelf• 364kg Shelf Load Capacity• 1955 x 610 x 1830mm• Industrial 4 shelf rack with

reinforced wire mesh• Adjustable grid pattern wire

shelvingS014

BONUS

Band Saw Blade• 10TPI Carbon• SUITS BS-7LB214

BONUS

Horizontal Metalcutting Bandsaw 7x12” Capacity• Mitre cuts to 45º• Built-in coolant system• 1hp, 240V motorB006

$198$275$297

$1045

Mobile Girder Rail Package• 1 tonne load capacity• 2500-3600mm adjust. height• 2300mm width inside frame• Swivel wheels with brakeK088Includes:Mobile Girder Rail C188 $6951 T Girder Trolley C147 $991 T Chain Block C143 $99

$120

$850

24

Please Note: We reserve the right not to sell a knife to a person under the age of 18 years.

$2850185mm

29-702

WORKSHOP & CUTTING TOOLS

25

Straight Air Die Grinder• Includes:• 6mm & ¼” collets• 2 year warranty73001

$59

27 Pce ¾ Drive Socket Set• 22-50mm & 7/8” – 2”• Includes ratchet• Sliding “T” & 2

extensions70015

42 Pce Bit SetTorx, Hex & spline includes:

• 3/8” & ½” adaptors, • spline & hex upto 12mm

• Torx T20 – T6070300

33Pce Screwdriver

& Bit Set• 20 assorted bits.

• 6 x blade• 6 x PH

70200

5 Pce Plier SetIncludes:• Combination Plier• Diagonal Cutters• Long Nose• Multigrips• Locking plier70750

15Pce Metric Combination Spanner Set7–21mm in tool roll70023

$7950

$129

$39

$32

$50

Extension Leads Industrial Quality• Insulated pins apply to Australian standards• Indoor/outdoor use• Neon light for both Pin & Plug• 15 amp lead, 10 amp plug (15 amp plug

available)

5m 70119 $16.5010m 70120 $23.0015m 70121 $32.0020m 70122 $41.0025m 70123 $50.0030m 70124 $60.00

$1650From

$899 $899

WD-40 Multi-Use Product 350g Smart Straw• Protects metal from rust

and corrosion• Cleans and lubricates• Drives out moisture• Permanently attached

Smart Straw – Never lose the straw again

61109

Solvol 4.5L Liquid• Natural citrus oils and

fine granules remove ingrained dirt

• Contains no petroleum solvents

• Suitable for removing inks, paints, silicone, glue and more from skin

71126

WD-40 Specialist White Lithium Grease• Thicker solution

which provides long term lubrication that won’t drip or run

• Can work in extreme temperatures of -30°C to +150°C.

• Water and heat resistant lubricant

• Ideal for bearings, hinges, winches, water pumps as well as gear and brake mechanisms

21102

$40

TOOLS, LUBRICATION & CLEANING

Heavy Duty 20L Gear Oil Drum Pump

• Heavy duty Zinc alloy (Zamak) drum pump and bung adapter• Sliding bung adapter

suitable for different height drums

• Delivers 170mL per stroke - on the down stroke

• Nozzle crimped to 1.8m rubber hose

• Ideal for the transfer & top ups of engine, hydraulic, gear, diff and synthetic oils where vehicle through put and owner expectations are high

10028

Cordless LED Workshop Light • 30 high intensity LEDs

emit 7-8 hours of light before recharge

• Shatterproof polycarbonate lens

• Resistant to water, grease and oil

• 240V and 12V rechargeable

20044N

20L Gear Oil Drum Pump • Capable of delivering up to

110mL on the downstroke• Downtube extension and

extra Reike adaptor make the pump suitable for use with a variety of 20L drums available on the market

• Ideal pump for the transfer of engine, gear, diff and hydraulic oils in busy vehicle servicing workshops

• Drainback nozzle holster ensures that excess oil ends up back in the drum

8828N2

Multi Purpose Top Up Kit• Ideal for topping up

difficult to access oiling points in the workshop and at home

• Suitable for all oils, automatic transmission fluids, brake fluids and some hand cleaners

• Container capacity of 1L7701A

$145

$22

AdBlue® Rotary hand Operated Drum Pump• Suitable for the

transfer of AdBlue®• Flow rates of up to

18 L/min• Suits 60L and 205L drums• Supplied complete with 3 metre

delivery hose, stainless steel spout,AB80055

$125

$4190

$125

El Series 12V Diesel Refuelling Tank Kit• 12 month warranty

Flow rates of up to 38 L/min• Self priming rotary vane pump• Suction capacity of up to 2m• Duty cycle of 30 minutes on, 30 minutes off• Equipped with a 12V DC motor and supplied

with suction & delivery hoses, battery cable with clamps, inlet filter & a manual plastic nozzle

F20020N

$330

EL Series Mini Pistol Grease Gun• Develops grease

pressures of up to 3,500psi (241bar)

• Suits bulk grease and 85g grease cartridges

• Heavy duty four jaw coupler

• 12 month warrantyG10050N

$2250

LUBRICATION & PUMPS

$1100ea

AdBlue® 205L 240V Drum Dispensing Kit• Polypropylene pump housing,

EPDM diaphragm, Viton seals• Flow rates of up to 23L/min• Manual shut of nozzle• 1.5m x ¾” ID PVC suction hose• 6m x ¾” ID PVC delivery hose • Also available in 12V 240V AB80020 $110012V AB80015 $1100

26

Piusi 1" BSPF Diesel Filter with Clear Plastic Bowl- 100 L/min• Max. pressure 50psi (3.5bar)• Removes water & particles• Filtration down to 30 micron611200

$145

$110 450g Trigger Action Grease Gun• Grease pressures of up to

8,500psi (586bar)• Delivers up to 1.1g of

grease per stroke• Coarse thread on barrel

assembly eliminates cross threading during cartridge changeover

• Twin Lock System seals the piston and eliminates the possibility of dummy lubrication

• Manufactured in Germany• 4 year warranty660AN

$98

• Aluminium body with oil resistant rubber casing

• 5-150psi (0.3-10bar) measuring range, accurate to ±1%

• Two position lever for inflation and deflation

51114

Automatic Digital Tyre

Inflator

27

Metabo 5.2 Ah 18v BatteryGreat freedom: Drive in screws, drill holes, saw, cut, grind, polish and illuminate with 5.2 Ah for even longer - completely without cable321000350

Impact DriverAU68901020

Impact WrenchAU68901030

18v Brushless Hammer Drill• Battery overload & single cell protection

90 Nm Hammer Drill • Drills Steel/Wood/Concrete• Max Speed: 2,050rpm• 2 x 5.2 Amp Hour batteries• ASC 30 Air Cooled Charger• Plus one tool of your choice

Angle GrinderAU68901010

Choose Your Bonus Skin

Or Or

$679ea

$290

BONUS

$179

125mm Angle Grinder, 1250 or 1700w• TC electronics• Autobalancer• Soft Start• Marathon Motor• Safety clutch• Restart protection• Quick Nut - easy disc change, no

tools required• Auto Stop Carbon Brushes• Anti Vibration handle600534000

$3791700w

Tin of 10 Cutting Discs

125mm x 1.0mm 61635900

BONUS

40 Pc 1/2” Sq. Dr. Impact Socket Set Metric • Manufactured from drop forged Chrome

Molybdenum steel with phosphate finish for greater corrosion resistance.

• High visibility laser etched markings for easier socket selection.

• Standard socket sizes - 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 22, 23, 24, 26, 27 & 30mm.

• Deep socket sizes - 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 22, 23, 24, 26, 27 & 30mm.

• Universal Joint.• 125mm extension bar.• Supplied in blow molded

storage case. A84617

Sq. Dr. Composite Body Impact Wrench• Forward and reverse shift

with 3 positions • Air inlet – 1/4” • Air pressure – 90 PSI

Sq. Dr. Impact Ball End Hex Bit Socket Set Metric or SAE• Manufactured from drop forged

Chrome Molybdenum steel. • Hardened and tempered for strength.

Supplied in metal case

$99

$199

34 Pc 1/2” Sq. Dr. Impact Socket Set SAE• Manufactured from drop forged Chrome

Molybdenum steel with phosphate finish for greater corrosion resistance

• High visibility laser etched markings for easier socket selection

• Standard socket sizes - 5/16”, 3/8”, 7/16”,

9 Pc 1/2” metric Sizes - 6, 7, 8, 10, 12, 14, 15, 17 & 19mmA84605 $99

9 Pc 1/2” SAE Sizes - 1/4”, 5/16”, 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 11/16” & 3/4”A84606 $99

3/4” 2100Nm• Maximum torque –

1550 Ft-lbs/2100Nm• Free speed – 5000 rpm• Length – 235mm A14035 $629

1/2” 1750Nm• Maximum torque –

1290 Ft-lbs/1750Nm• Free speed – 1750 rpm• Length – 196mm A14015 $329

3/8” 600Nm• Maximum torque – 450

Ft-lbs/600Nm• Free speed – 10000

rpm• Length – 171mm A13905 $249

$249From

1/2”, 9/16”, 5/8”, 11/16”, 3/4”, 13/16”, 7/8”, 15/16”, 1”, 1-1/16”, 1-1/8”, 1-3/16”, 1-1/4”.

• Deep socket sizes - 5/16”, 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 11/16”, 3/4”, 13/16”, 7/8”, 15/16”, 1”, 1-1/16”, 1-1/8”, 1-3/16”, 1-1/4”

• Universal Joint• 125mm extension bar• Supplied in blow molded storage

caseA84618

$199

KHA 18 LTX Rotary Hammer Skin• Skin Only - Battery not included• Hammer stop for drilling in rotary

only mode and for screw driving• Rotation stop for chiselling• Idle revolution – /min• Max. impact rate - 4.000 /min• Impact power - 164 J/s• Bit retainer – SDS-plus• Clockwise and anti-clockwise rotation• Drill diameter in: Concrete – 24mm,

Steel – 13mm, Soft Wood – 25mm• Vario (V)-electronics for working with

customised speeds for the materials used

• Max. single blow energy (EPTA) - 2,2 J• Weight (incl. Battery pack) - 2,9 kg600210890

13pc SDS Set Assorted sizes

AU69001600

Metabo 18v LED Torch• Skin Only• Compact & handy for

versatile use• Lamp head can be

tilted and locked in 12 positions

• Robust die cast aluminium case

• Includes swivelling hook for suspending the torch

600368000$59

TOOLS & POWER TOOLS

28

248Pce AF & Metric Wall Cabinet• Wall Cabinet (TCW1) • 1/4, 3/8 & 1/2” DR Socket Sets – Metric

& AF• Combination, Open End & Ring

Spanners Set – Metric & AF• Adjustable Wrenches• 28pc Hex & Star Bits Set• 30pc Hex Key Set – Metric & AF• Precision Screwdriver Set• Assorted Pliers• Punch & Chisel Set• Podger Bar• Hammer, Hacksaw & much more...ATK50

5PC File Set

• 8” Round, Half Round & Flat

• 6 & 10” MillA15002

8Pce Combination Spanner Set – AF• 1 – 1-1/2” • Carbon Steel• Raised Panel19828

1 Watt LED Aluminium Torch • Tough Anodized Aluminium

Water Resistant Body• Shatter Resistant

PVC Lens• Brightness: 130lm, 100,00

hours• 3 x AAA Batteries Included137408

$40

$22

$1450

$175262Pce AF & Metric Ute Box Kit• 3 Drawer Utebox with BBS • 3 High Density Foam Inserts • 1/4, 3/8 &1/2’’ DR Socket Sets • Combination, Open End &

Ring Spanners Set • Assorted Pliers • Anti-Slip & Precision

Screwdriver Sets • Adjustable Wrenches • Hex Key Set • Punch & Chisel Set • Hacksaw & Hammer • Plus Much More...ATK703U

$1895

6Pce Combination Spanner Set – Metric or AF• Carbon Steel• Extra Large • Raised Panel35 – 51mm 19830 $2651-3/8 – 2” 19829 $265

$265

WORKSHOP & HAND TOOLS

CATEGORY TITLE

41Pce 1/2” Dr Metric & AF Socket Set • 10 - 32mm • 3/8 - 1-1/4” • 5/8 & 13/16” Spark Plug Sockets• Ratchet, Sliding T Bar & Extensions10120

$150$90

39Pce 1/4 & 3/8” Dr Socket Set• 1/4” DR Metric: 4 - 12mm • 1/4”AF DR: 3/16 -1/2” • 3/8” DR Metric: 9 - 19mm • 3/8” DR AF: 3/8 - 3/4” • 5/8”Spark Plug Socket 10100

4 Tonne Bottle Jack• Lifting Range:

200-325mm• Adjusting

Height: 80mm• Weight: 4kgBJ4000

8 Tonne Bottle Jack• Capacity: 6t• Minimum

Height: 240mm• Maximum

Height: 400mmBJ8000

12 Tonne Bottle Jack • Lifting Range:

245-405mm• Adjusting

Height: 80mm• Weight: 15kgBJ12000

$69$60$45

262Pce Toolkit Metric & AFHDFI Tray: Offset Screwdriver, Screwdrivers, Ring Spanner Set, Comb Spanner Set, XS Comb SpannersHDFI Tray: Screw Extractor Set, Ring Spanner Set, Open End Spanner Set, Combination Spanner SetHDFI Tray: 1/4, 3/8 & 1/2’’ Dr Skt SetsHDFI Tray: Diag. Cutters, Comb, Locking & Longnose PliersHDFI Tray: 32 Blade End Feeler GaugeHDFI Tray: Various Screwdrivers (Including Stubbies)• 6 Drw Toolbox With Ball

Bearing Slides• 6 High Density Foam

Insert TraysATK70BB-7

7Drw Rollaway• 680 x 458 x 995mm• Fully Lockable• Heavy Duty Casters• Ball Bearing SlidesA12112

BONUS

$1750

24Pce Combination Spanner Set• 6 – 21mm• ¼” – 15/16”• Carbon Steel15860

$105

WORKSHOP & HAND TOOLS 29

30

TLWN06

$40 Truck Load Winches & StrapsMini truck l/winch & 6mt strap MTLW6 $24.00Mini truck load winch strap 6m MTLW STRAP X 6M $12.00Truck gate winch (narrow) - 6m TLWN06 $40.00Truck load winch clip-on ratchet type 9m TLWRC09 $60.00Truck load winch clip-on ratchet type 11m TLWRC11 $66.00Truck load winch slide on ratchet type 9m TLWRS09 $55.00Truck load winch slide on ratchet type 11m TLWRS11 $60.00Truck load winch strap x 6 metre TLW STRAP X 6M $12.00Truck load winch strap 9 metre TLW STRAP X 9M $13.00Truck l/winch strap 11 metre 2500kg LC TLW STRAP X 11M $16.50Truck l/winch strap 13 metre 2500kg LC TLW STRAP X 13M $20.00

$396

Straddle Manual Stacker 1500Kg

MSS1500

Pallet Truck 2500KG Single WheelPT685

$1500

Fork Lift Extensions1524 x 127 FLEXT1524 $300 1830 X 152 FLEXT1830 $330

$300From

MATERIAL HANDLING EQUIPMENT

$690

Scissor Lift Table350KgLT350

$380 $580

Scissor Lift Table300KgLT300

Scissor Lift Table150KgLT150

CATEGORY TITLE

Forklift Safety Work Platform FLSWP001

Round Slings

1T X 1 Metres RS11 $4.401T X 2 Metres RS12 $6.601T X 3 Metres RS13 $9.901T X 4 Metres RS14 $17.002T X 1 Metres RS21 $6.602T X 2 Metres RS22 $11.002T X 3 Metres RS23 $17.002T X 4 Metres RS24 $19.803T X 1 Metres RS31 $12.003T X 2 Metres RS32 $16.003T X 3 Metres RS33 $24.003T X 4 Metres RS34 $36.00

$440From

Webbing Slings

1T X 1 Metres WS11 $5.501T X 2 Metres WS12 $7.701T X 3 Metres WS13 $11.001T X 4 Metres WS14 $16.002T X 1 Metres WS21 $7.702T X 2 Metres WS22 $15.602T X 3 Metres WS23 $19.802T X 4 Metres WS24 $24.003T X 1 Metres WS31 $11.003T X 2 Metres WS32 $19.803T X 3 Metres WS33 $28.003T X 4 Metres WS34 $39.00

$550From

Riggers Fall Arrest HarnessTRR01

$160

Webbing Lanyard 1.5m w/ Shock AbsorbWL01

Stainless Steel Castors - Nylon Fixed, Swivel or Braked3” Fixed SSLDF3NY $20.004” Fixed SSLDF4NY $22.005” Fixed SSLDF5NY $28.003” Swivel SSLDS3NY $39.004” Swivel SSLDS4NY $40.005” Swivel SSLDS5NY $48.003” Swivel Total Brake SSLDS3NY/TB $40.004” Swivel Total Brake SSLDS4NY/TB $48.005” Swivel Total Brake SSLDS5NY/TB $55.00

Puncture Proof Non-Marking Grey Pu Wheels2.50 X 4” PU250419351G $18.00

3.00 X 4” PU300419351G $26.003.50/4.10 X 4” PU350419351G $30.004.00 X 8” PU40081X21G $40.003.50/4.10 X 4” 5/8 BRG PU350416351G $30.003.50/4.10 X 4” 5/8 BRG Off Set Rim PU350416353G $30.003.50/4.10 X 4” 3/4 BRG Off Set Rim PU350619353G $30.00

$18From

Heavy Duty Castors - Cast Iron Wheel w/PU Tyre4” 320kg Fixed HIF4CIPU $16.505” 400kg Fixed HIF5CIPU $20.006” 450kg Fixed HIF6CIPU $22.008” 450kg Fixed HIF8CIPU $28.004” 320kg Swivel HIS4CIPU $24.005” 400kg Swivel HIS5CIPU $25.006” 450kg Swivel HIS6CIPU $30.008” 450kg Swivel HIS8CIPU $36.004” 320kg Total Brake HIS4CIPU/TB $30.005” 400kg Total Brake HIS5CIPU/TB $36.00

6” 450kg Total Brake HIS6CIPU/TB $36.008” 450kg Total Brake HIS8CIPU/TB $40.00

$18From

$18From

$120

$1600

WHEELS, SLINGS & SAFETY EQUIPMENT 31

Weldmatic Workshop™ Trolley• Gas bottle tray & chains to

secure bottle.• Mobile Welding Trolley• Customised support plate

for Weldmatic 190.• Heavy duty wheels & castors.• Powder coated panels.• Cable hangers.• Two storage drawers. AM353

Weldmatic 190• 190 Amp MIG Welding Package• Ideal for home, rural, light

manufacturing and hire fleets.• Fillet weld up to 8mm steel,

stainless steel and aluminium.• Easy set-up and adjustment, with

9 voltage settings.• Suits gas shielded or gasless flux-

cored wires.• 1kg & 5kg spool capacity.• 3 year Gold Shield warranty,

including parts & labour.CP131-0

$189 $1099

Miller Digital Elite™ SeriesAuto-Darkening Welding Helmets:

• Complies with Australian Standards AS/NZS 1338.1 (Auto-Darkening) and

AS/NZS 1337.1 B (High Impact).• Digital controls to adjust modes,

shade, delay and sensitivity• Includes: 5 outside cover lenses, 2

inside cover lenses and helmet bag• 3 year warranty (auto-darkening lens only)

• Battery powered with solar assist

Bairnsdale Branch 521 Main Street (03) 5153 1555 bairnsdale@bjbearings.com.auCampbellfield Branch 1930 Hume Highway, VIC (03) 9357 6166 campbellfield@bjbearings.com.auLeongatha Branch 38 Yarragon Rd (03) 5662 4300 leongatha@bjbearings.com.auMorwell Branch 61 Chickerell Street (03) 5134 3777 morwell@midvalleybearings.com.auPakenham Branch 1/8 Purton Road (03) 5940 1111 pakenham@bjbearings.com.auSale Branch 135 Raglan Street (03) 5144 5111 sale@bjbearings.com.auTraralgon Branch 1055 Princes Highway (03) 5175 0500 traralgon@midvalleybearings.com.auWarragul Branch - Head Office 13 Endeavour Street (03) 5623 5444 warragul@bjbearings.com.auWonthaggi Branch 28 Inverloch Road (03) 5672 1200 wonthaggi@bjbearings.com.au

All prices include GST and prices in this catalogue may vary from store to store or be subject to plus freight where applicable. Some products may not be available at all stores and are subject to availability. BJ Bearings reserves the right to correct printing errors and omissions. Accessories shown with products are not included unless specified. Colours may vary to actual items.

YOUR LOCAL BJ BEARINGS STORES QUALITY ENGINEERING SUPPLIES

Inferno 257217 Joker 257218Lucky 257214

Black 257213

WIA Blue Helmet• Magnifying lens holder & Grind Mode• Complies with Australian Standards: AS/NZS 1338.1

(Auto-Darkening) & AS/NZS 1337.1 B (High Impact).• 1 year warranty (auto-darkening lens only)• Variable Shade (9-13)• Battery powered with solar assist235620

$129

$398ea