Upload
others
View
9
Download
0
Embed Size (px)
Citation preview
15.72 hrs
2 pcs
f
0.20 mm
k
0.40 mm
h
1
144.00 g
d
MK3/S
Summary
An excellent model by Shira more details here: https://cults3d.com/en/3d-model/home/birdhouse-shira.
I cut it in half to make printing easier, the original file is too big to fit on aMk3S without scaling.
I scaled it down for ease of printing and is probably too small to befunctional; if you want it as a usable birdhouse it would need to be scaledup to the maximum that will fit on the bed.
Household > Outdoor & Garden
box bird
Printer: Prusa
Model: Mk3S
Rafts: No
Supports: No
clivebradshaw
Birdhouse
VIEW IN BROWSER
updated 24. 2. 2020 | published 24. 2. 2020
Print Files (.gcode) DOWNLOAD ALL FILES
20.8 MB
6.07 hrs f 0.20 mm k 0.40 mm h PLA 50.00 g d MK3/S
updated 24. 2. 2020
31.6 MB
9.65 hrs f 0.20 mm k 0.40 mm h PLA 94.40 g d MK3/S
updated 24. 2. 2020
Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES
13.2 MBupdated 24. 2. 2020
56.8 MBupdated 24. 2. 2020
44.1 MBupdated 24. 2. 2020
Resolution: 0.2
Infill: 20%
Filament: 3Dprintz brown PLA
Find source .stl files on Thingiverse.com
bird-house-base-02mm-pla-mk3s-6h4m.gcode
bird-house-top-02mm-pla-mk3s-9h39m.gcode
bird-house-base.stl
birdhouse.stl
bird-house-top.stl
License
This work is licensed under a Creative Commons (4.0 International License)
Attribution—Noncommercial—Share Alike
✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✖ | Commercial Use ✖ | Free Cultural Works ✖ | Meets Open Definition