Introducing the First Android 4-4-2 Ten Finger Biometric TabletBuilt for public safety officers, military personnel, border patrol agents, and other field operators, the BioSense™ AT80 MAX captures high-quality single / four finger direct and single finger rolls in any environment.

Suitable for Mobile or Stationary Use Weighing only 2 lbs, AT80 MAX is adaptable to stationary or mobile field operations. The FBI-certified FAP50 fingerprint scanner enables operators to enroll, verify, and book individuals anytime, anywhere.

FBI-Certified FAP50 FingerprintThe industry-leading Five-0 4-4-2 fingerprint scanner uses cutting-edge Light Emitting Sensor (LES) technology to

produce high-resolution images. Rated FAP50 (Appendix F-Certified), the scanner’s LES surface resists latent fingerprints, dirt, cold, heat, bright lights, and sunlight, enabling accurate results under demanding conditions. The AT80 MAX offers speed and mobility for field officers in mission-critical operations.

Highly Durable & Versatile Platform The MIL-STD 810G and IP-67 certified tablet platform is constructed with lightweight, durable aluminum housing withstanding water, dust, and various environmental elements.

Designed for easy customization, the BioSense™ AT80 MAX makes it easy to adapt end-user feedback into any roll out. Reduce the risk of adoption failure and gain maximum flexibility in adapting to real-world application scenarios.

BIOSENSE AT80 MAX ™8 ” R U G G E D A N D R O I D ™ B I O M E T R I C T A B L E T

Item Standard

Processor Texas Instrument OMAP 4470 Dual-core 1.5GHz

Memory 1GB LPDDR RAM

Storage (Built-In) 8 GB

Micro SD Supports SDHC up to 32GB

Display 8-inch LCD (1024x600), 450 nits Optically bonded

Touch screen 10-point Capacitive

Front Camera 5MP Camera Module

Rear Camera 5MP Camera Module (Optional: Rear camera flash)

OS Android 4.3

Wireless 802.11 b/g/n

GPS Yes

3G Optional 3G modem

I/O Ports

Micro SD card x 1, Power jack x 1, USB2.0 Host/OTG x 1, Speakers x 2, Headphone x 1, 3.5mm headphone jack x 1Internal: PCIe/USB x 1, SIM holder x 1Options: Serial (RS232/422/485) x 1, Ethernet 10/100 (RJ45) x 1, USB2.0 Host x 2

ENVIRONMENTAL RATINGS

MIL-STD 810G CertifiedAltitude Method 500.5, Procedure I & II

High Temperature Method 501.5, Procedure I & II, Operating: +60 ° C

Low Temperature Method 502.5, Procedure I & II, Operating: -20 ° C

Vibration, Category 4 514.6C-1, Category 4

Vibration, Category 20 514.6C-1, Category 20

Rain Method 506.5, Procedure II

Humidity Method 507.5

Operational Shock Method 516.6, Procedure I

Transit Drop Method 516.6, Procedure IV

Crash Hazard Impulse Shock Method 516.6, Procedure V

Bench Handling Method 516.6, Procedure VI

IEC IP-67 Certified Dust-protected; water immersion up to 3ft

Five-0 FAP50 (4-4-2) 10-FINGER SCANNER

Specification FBI PIV & Mobile ID FAP50 Fingerprint Sensor

Technology Light Emitting Sensor (LES)

Resolution 500 PPI

Sensing Area 3.2” x 2” FAP50

Platen Area 3.38” x 2.12” | 85.85 x 53.97 mm

Grayscale 256 grayscale dynamic range

Image Size 1600 x 1000 pixels

Interface USB 2.0 (USB Type C, Molex 51146-0600, Molex 51021-0600)

Image Supported Formats RAW, JPEG2000, BMP, PNG, WSQ

OS Support Windows Desktop 32/64 bit (7,8,10),Windows Server, Linux, Android 4.0+, Java

Certification FCC Part 15 (per ANSI C62.4:2003) Class A, CSA ICES-003 Class A, CE Emissions: EN 55022:2006 Class A, CE Immunity EN 55024:1998/A1:2001/A2:2003, IEC 61000-4-2

EnvironmentOperating temperature: -10°C ~ +55°C / 14°F ~ 131°FAir & Contact Discharge, Humidity, Sufrace Durability, Vibration Test, Surface Resistance, Hazardous MaterialIP-65 Sealed bezel

** Specifications subject to change without notice **

Item Standard

Power Input 12V power jack

Vibrator motor Yes

G-Sensor Yes

Light Sensor Yes

Accelerometer Yes

E-Compass Yes

Battery 3.7V/4200 mAh Li-Polymer Battery

Size (with bumpers) 12.75” W x 6.87” L x 1.75” H32.38 x 17.45 x 4.44 cm

Weight 2 lbs. (0.91 kg)

Available ColorMoon Gray, Sky Blue, Pirates Gold, Marigold, Sunset, Titanium, Crimson Red,Sage Green, Forest Green, Steel Blue

FBI PIV & Mobile ID Certified Fingerprint Sensor

• FBI PIV & Mobile ID FAP50 Fingerprint Sensor(See below specifications)

For more information, please contact: AskUs@amrel.com | +1.626.482.1862http://www.amrel.com

BioSense™ AT80 MAX TECHNICAL SPECIFICATIONS

ENG-BioSense AT80 MAX-RevOrig