BIOS Return Procedure

Embed Size (px)

DESCRIPTION

Doc

Citation preview

preparation* get a working PC with internet and cd burner, burning software to burn ISO file and a emty cdrom.* download this file , extract it from the RAR archive, then burn the ISO to a CD.* put the CDrom at the bricked dell n7110 optical drive and turn the machine off.procedure.1- turn off your bricked dell n7110 laptop and put the recovery cdrom inside the optical drive.2- unplug the power cord, and press End button.3- plug the power cable, and then you relase the End button fast. (the machine should start automatically without push the power button)4- the bios start reading the cdrom, it load BIOS.cap file from the cdrom.5- you have to hit F12 fast when the dell splash screen is at the screen, it will bring the device boot menu, then select cdrom. (if you didnt hit f12 in time, you will have to power off the machine and repeat the whole procedure again)6- bartpe - windows xp will start being loaded.7- when you are at the main screen, click NO on the network message box. then click the GO button and click "Command Prompt(CMD)" open a cmd prompt. and type "repair" without the quotes, that will launch my main script (Dont close the CMD window, it still needed to reboot the system.)8- follow the script instructions, it is a little modified script from my main custom bioses.9- since the automatic reboot didnt worked for the winflash in that boot cd, my script will do it, just wait after the winflash window is closed and the system will autorestart.10- black screen for some seconds and the flashing screen will appear , if the flashing procedure ends correctly, your BIOS should be working back ^^ (this recovery method installs A13 stock BIOS)preparation