Upload
duongbao
View
225
Download
6
Embed Size (px)
Citation preview
BIOM API Installation Manual
Manual Index:
1. BIOM API and driver installation.
2. Generate Computer ID.
3. Apply for License.
4. Internet browser setting.
5. Test Legend Scanner
1. BIOM API and driver installation.
Step : 1
Click Windows Button and type UAC and then click Change User Account Control Settings
Step : 2
Bring the Bar to Never Notify and then press Ok button.
Step : 3
Open the Biom API Folder
Step : 4
Right click the BiomAPI.exe and the click Run as administrator button
Step : 5
Now Click the Install Button
Step : 6
Now the BiomAPI Setup gets installed
Step : 7
Now click Next button to install the Device Driver
Step : 8
Now the Device Drivers gets installed
Step : 9
Click the Finish button to complete the device driver’s Installation.
Step : 10
Click the Close button to Complete the installation.
Step : 11
Click Yes to restart the Computer.
2. Generate Computer ID.
Step 11 :
Once the Installation completed go to the below path & then Right click the License Manager and click Run as administrator
C:\Program Files\Precision Biometric\BiomAPI\License
Step : 12
Now click Generate ID.
Step : 13
Now click the save button to save the computed id.
Step : 14
Now Apply with saved Computer id in http://precisionit.epayer.in portal to get the License.
CSD200 DEVICE SDK – LICENSE ACTIVATION PROCEDURE:
Step 1:Make sure Biometric SDK 3.10.5 has been installed in the system.
Step 2: Make sure your system is connected with internet.
Step 3: Right click the BiomLicenseActivation.exe application and click Run as administrator.
Step 4: Make sure below application has been opened.
Step 5: Enter your purchase order ID or (REF NO) which is available in invoice.
Step 6: After entering the purchase order ID click Get License button.
Step 7: The application will be closed automatically , if the license activated successfully.
Step 8: Restart the system (recommended).
If you are getting any error message while activating this license, feel free to contact Precision Biometric Support Team.
Phone number: +91 44 33015 137 / 343
Email: [email protected]
Test Legend Scanner
Now go the below path and Right click the Test Legend Scanner then click Open button
C:\Program Files\Precision Biometric\BiomAPI
Step : 20
Now Right click the Yellow bar in Internet Explorer & then click Allow Block Content
Step : 21 - Now Click Yes Button
Step : 21
Now go to Tools Internet Options Privacy and bring the Setting bar Down.
Bring the Setting bar Down
Internet browser setting.
Step : 22
Now go to Tools Internet Options Security Click Trusted Sited and add the site which is going to be used.
Add the site which is going to be used.
Step : 23
Now go to Tools Internet Options Security Click Trusted Sited Custom Level and enable all modules.
Now the Installation is completed and the device will be working fine .