BIDI SEE OR N-P PUBLIC PUBLIC PAGE O NLI ERSO NE.N …s3.serverdata.com/ · INTERNET: Cincinnati Industrial Auctioneers Inc. PPL Auction ... Control, PRC Laser, 3500 Watts, 48”

H H H H H H H H HH H H H H H H H H HH H H H H H H H HH H H H H H H HH H H H H H H HH H H H H H H H HH H H H H H H H H HH H H H H H H H H HH H H H H H H H H H PLANT CLOSED

PUBLIC PUBLIC

ERFURT 2000-KN 8-WORK STATION TRANSFER PRESS (12) DENN, LEIFELD, PARX & AUTO SPIN SPINNING LATHES

(11) TOSHIBA, HPM, SUPERMAX & GOLDSTARPLASTIC INJECTION MOLDERS TO 1,450-TON

BID IN-PERSON

OR ONLINE.

SEE PAGE 7 FOR DETAILS

(2) LUMONICS LASER-DYNE BEAM DIRECTOR CNC LASERS (3) OKUMA CNC TURNING CENTERS

UUpp ttoo11,,445500--TToonn

AKA inSync Manufacturing, LLC

CASEYTOOL & MACHINE CO.400 W. Delaware Ave. in Casey, Illinois 62420

WEDNESDAY, DECEMBER 4THSTARTS AT 10AM

Inspection: Day prior to auction from 9AM-5PM

Cincinnati Industrial Auctioneers Inc.2020 DUNLAP ST., CINCINNATI, OHIO 45214PH (513) 241-9701 / FAX (513) 241-6760INTERNET: www.cia-auction.com

Cincinnati Industrial Auctioneers Inc.

PPL AuctionA DIVISION OF PPL GROUP LLC3100 DUNDEE ROAD., SUITE 915NORTHBROOK, ILLINOIS 60062PH (224) 927-5300 / FAX (224) 927-5311INTERNET: www.pplauction.com

PPL AuctionMyron Bowling Auctioneers Inc.P.O. BOX 369 ROSS, OHIO 45061PH (513) 738-3311 / FAX (513) 738-0221INTERNET: www.myronbowling.com

Myron Bowling Auctioneers Inc.

11 OOFF 22 11 OOFF 33

11 OOFF 1111

11 OOFF 1122

www.pplauction.com

www.pplauction.com

2

CASEY TOOL & MACHINE CO / 400 W. DELAWARE AVE. IN CASEY, ILLINOIS 62420

OKUMA CADET LNC 8C2 CNC TURNING CENTER

OKUMA LR35 CNC TURNING CENTER

LUMONICS 890-CLIV-PRC LASER-DYNE BEAM DIRECTOR CNC LASER

KRUPP 630-KN 9-WORK STATION TRANSFER PRESS ERFURT 2000-KN 8-WORK STATION TRANSFER PRESS

OKUMA LNC-10/CADET-L1420 CNC TURNING CENTER

LUMONICS 890-IV-VFA15S LASER-DYNE BEAM DIRECTOR CNC LASER

3

WEDNESDAY, DECEMBER 4TH AT 10AM / INSPECTION: DAY PRIOR TO AUCTION FROM 9AM - 5PM

SEYI-SUTHERLAND 275-TON AUTO STAMPER MINSTER HSD-H-275-99150-TON SSDC PRESS

WARCO S2-150-60-36 50-TON STRAIGHT SIDE PRESS

DECKEL FP50NC CNC UNIVERSAL VERTICAL MILL

HURCO VM2 CNC VERTICAL MACHINING CENTER

DECKEL FP5CC/T CNC UNIVERSAL HORIZONTAL MILL

BRIDGEPORT LNT-720F INTERACT 720 PRODUCTION CENTERCNC VERTICAL MACHINING CENTER

CNC LASERSLUMONICS 890-CLIV-PRC Laser-DyneBeam Director CNC Laser, S/N 29,New 1996, Travels: 96” X-Axis, 72” Y-Axis, 36” Z-Axis, System 94 CNCControl, PRC Laser, 3500 Watts, 48” x72” Fixed Table w/10” Rotary Chuck,Positech Vacuum Loading Assist; AECChiller, Model NXLA-2-150, 15/7.5-HPLUMONICS 890-IV-VFA15S Laser-DyneBeam Director CNC Laser, S/N 002,New 1992, Travels: 96” X-Axis, 72” Y-Axis, 36” Z-Axis, System 94 CNCControl, PHOTON VFA-15 Laser, 1500Watts, 47-1/2” x 11’-2” Fixed Table w/10”Rotary Chuck; AEC Laser TemperatureChiller, Model NXGA-7.5Q, 7.5-HP

CNC TURNINGCENTERS

OKUMA LR35 CNC Turning Center,

S/N 0208-0031, Okuma OSP5020LControl, Kitagawa B212A801X 12” 3-JawChuck, 12-Tool & 10-Tool Turrets, 21.65”(550mm) Max. Turning Diameter, 30.31”(770mm) Max. Turning Length, Coolant,Chip ConveyorOKUMA LNC-10/Cadet-L1420 CNCTurning Center, S/N 0802-0171, New1996, Kitagawa B215 15” Chuck, OSP5020L Control, 20” Swing, 14” MaxTurning Dia., 49.2” Max Turning Length,3.15” Bore,12-Tool Turret, PowerTailstock, Coolant, Hennig ChipConveyorOKUMA CADET LNC 8C2 CNC TurningCenter, S/N 0609-C384, OkumaOSP5020L Control,12-Tool Turret, 15.75”Max Swing, 9.84” Max Turning Dia, 19.7”Between Centers, 2.2” Spindle Bore,4200 RPM SpindleCNC VERTICAL MACHINING CEN-TERS

2007 HURCO VM2 CNC VerticalMachining Center, S/N H-V20500,Hurco Max. Control, Travels: 40” X-Axis,18” Y-Axis, 18” Z-Axis, 8,000-RPM, 16-Position ATC, 46” x 18” T-Slot Table, 40-Taper SpindleBRIDGEPORT LNT-720F Interact 720Production Center CNC VerticalMachining Center, S/N 70946, New1989, Fanuc Series O-M Mate Control,Travels: 30” X-Axis, 16” Y-Axis, 17” Z-Axis, 36” x 15” T-Slot Table, 40-TaperSpindle, 20-Position ATC, 10,000 RPM

CNC MILLSDECKEL FP50NC CNC UniversalVertical Mill, S/N 2813-0163, New 1988,Deckel Dialog II Control, 63” x 26.5” T-Slot Table, Travels: 48” X-Axis, 24” Y-Axis, 20” Z-Axis, 5,500 RPM Spindle,IBAG Auxiliary 0-25,000 RPM Spindle,40-Taper Spindle

DECKEL FP5CC/T CNC UniversalHorizontal Mill, S/N 2815-0110, DeckelDialog II Control, 43-1/4” x 23-1/4” T-SlotTable, Travels: 32” X-Axis, 24” Y-Axis,22” Z-Axis, 40-Taper Spindle, 90° HeadMAHO MHC 900 CNC UniversalHorizontal / Vertical Mill, S/N 90-306,MAHO 432 CNC Control, 43” x 27.5”Rotary Table, Travels: 39.4” X-Axis, 19.7”Y-Axis, 25.6” Z-Axis, 40-2,000 RPMSpindle, 40 Taper SpindleMAHO MH700C CNC UniversalHorizontal/Vertical Mill, S/N 76366,Heidenhain CNC Controls, Parts/repair

STAMPERSEYI-SUTHERLAND 275-Ton AutoStamper, Model HSD-H-275-99, S/ND250-054, New 1998, 95.5” x 49.2”Bolster, 86.6” x 43.3” Slide, 10” Stroke,24” Die Height, 25-50 SPM, 31”Windows, Wintress Auto Set 1504 LoadAnalyzer, Gemco Brake Monitor; DAL-LAS .140” x 30” Feeder, Model D400-30X18RH, S/N 20620 w/Straightener;DALLAS 8,000-lb. Uncoiler, ModelDPR8000#X36LH, S/N 20619, 36” Width,16” - 21” ID, 60” OD Max.

STRAIGHT SIDEPRESSES

MINSTER 150-Ton SSDC Press, ModelS2-150-60-36, S/N S2-15-13174, 60” x36” Bolster, 8” Stroke, 10” Adjustment,35.5” Shut Height, 30-60 SPM, 19”Windows, Shadow VI Light Curtain,Wintress Smart Pac Press Control; AIRFEEDS 18” x 24” Press Feeder, ModelAF-3, S/N 830132, w/Straightener; DAL-LAS 6,000-lb. Uncoiler, Model DRP-6000#X24LH, S/N 20779, 24” Width, 16”- 21” ID, 60” OD Max.WARCO 50-Ton Straight Side Press,Model 50-2-32C, S/N 4922, 8” Stroke, 3”Slide Adjustment, 25” Shut Height, 31” x26” Drilled & Tapped PlatenTRANSFER PRESSESERFURT 2000-KN 8-Work StationTransfer Press, Type PST-0-200/8/400/550/NC, S/N 00674501, New1994, 1600-KN Between Uprights, 4000-KN Blanking Station Force, 15.74”(400mm) Between Station, 19.68”(500mm) Ram Stroke, 6.29” (160mm)Blanking Station Stroke, 2.36” (60mm)Tool Holder Adj., 14-42 SPM, 31.5”Window, 10” Max. Height, SiemensControl w/Kemmerich Straightener, 30”Max. Width, New 1994, KemmerichDouble Uncoiler, Model VD5000RMB30,S/N 9072, 11,000-lb. (5,000 KG)KRUPP 630-KN 9-Work StationTransfer Press, Model PST-b63/10/120/120, S/N 3025, New 1985,130-KN Blanking Station Force, 4.72”(120mm) Slide Stroke Adj., 1.25” (32mm)Tool Holder Adj., 40-140 SPM

22000077

4


NELMOR G2244 75-HP GRANULATOR

TOSHIBA 1SGS500V10-27B 500-TON PLASTIC INJECTION MOLDER

TOSHIBA ISF1450DV10-110A 1,450-TON PLASTIC INJECTION MOLDER

BALL & JEWELL VGM1634 40-HP GRANULATOR

ADVANTAGE ATS-75-3P-SP2 PTS CHILLER

TOSHIBA ISF310SII-19B 310-TON PLASTIC INJECTION MOLDER

TOSHIBA ISF500SII-27B 500-TON PLASTIC INJECTION MOLDER

HPM 1000-160 1,000-TON PLASTIC INJECTION MOLDER

22000044

11,,445500--TTOONN

5


CLEARING 200-P-701-OBI 200-TON OBI PRESS

TOSHIBA ISF250SII-19A 250-TON PLASTIC INJECTION MOLDER BLISS C110110-TON OBI PRESS

STAMTEC G1-80, S/N S80831 80-TONGAP FRAME PRESS

USI HG-50-16 50-TONGAP FRAME PRESS

(2) ROUSSELLE 4-WGAP FRAME PRESSES

PACIFIC 250PF 250-TONGAP FRAME PRESS

PLASTIC INJECTIONMOLDERS

TOSHIBA 1,450-Ton, ModelISF1450DV10-110A, S/N 810801, New1998, 213 oz Shot, 74.8” x 72.8” Platen,51.6” x 49.8” Between Ties, 51.1”Normal/74.8” Max. Stroke, 78.7”/98.4”Max. Daylight, 27.5”/47.2” Min. Mold,Injectvisor V-10 Control; Wittman Robot,Model W-450, S/N 5101/013, New 1990,Travels: 47.24” X-Axis, 103.36” Y-Axis,236.22” Z-Axis, Teach Pendant Control;ADVANTAGE SENTRA TemperatureController, HE2000, Model SK-3480-41C1, S/N 36796, 34KW, 3-HP; CONAIR1,000-lb. Hopper, w/Conair CompudryDryer, Model CD600, S/N 54100HPM 1,000-Ton, Model 1000-160, S/N72-458, 160 oz. Shot, 60” x 60” Platen,39.5” x 39.5” Between Ties, StackedRelay Controls, HopperTOSHIBA 500-Ton, Model1SGS500V10-27B, S/N 953406, New1999, 63-oz. Shot, 48.63” x 45.67”Platen, 34.0” x 31.89” Between Ties,55.1” Max. Daylight, 41.3” Clamp Stroke,13.8” Min. Mold, Injectvisor V-10 Control,Hopper; ADVANTAGE TemperatureController, Model SK1075VE-41C1, S/N88989, New 2004TOSHIBA 500-Ton, Model ISF500SII-27B, S/N 315705, New 1993, 63 ozShot, 47.75” x 47.75 Platen, 32” x 32”Between Ties, 39/0” Stroke, 55.1” Max.Daylight, 15.8” Min. Mold, Injectvisor SIIControl, Hopper(2) SUPERMAX 330-Ton, Model PRO-330P, S/N 900392 & 900469, New 1990,48 oz. Shot, 39.0” x 35.5” Platen, 27” x22.75” Between Ties, 11.81” Min. Mold,Promax 3000 Control, HoppeTOSHIBA 310-Ton, Model ISF310SII-19B, S/N 206405, New 1992, 41 ozShot, 35.5” x 35.5” Platen, 24.0” x 24.0”Between Ties, 29.9” Stroke, 41.7” Max.

Daylight, 11.8” Min. Mold, Injectvisor SIIControl, Hopper; ADVANTAGE SENTRALE Temperature Controller, Model S-925LE-41C1, S/N 26228, 9KW, 3/4-HPTOSHIBA 250-Ton, Model ISF250SII-19A, S/N 490705, New 1994, 30 ozShot, 32.3” x 32.3” Platen, 22.2” x 22.2”Between Ties, 29.9” Stroke, 39.4” Max.Daylight, 9.4” Min. Mold, Injectvisor SIIControl, HopperGOLDSTAR 200-Ton, Model IDE220,New 1994, S/N N94022E4206, 19.2 ozShot, 30.75” x 31.50” Platen, 21.1” x21.1” Between Ties, 19.8” Stroke,28.34”/35.43” Max. Daylight, 8.46”/15.5”Min. Mold, Hicom 200 Control, HopperTOSHIBA 190-Ton, Model ISF190SII-10A, S/N 498405, New 1994, 15.9 ozShot, 29.10” x 29.10” Platen, 20.1” x20.1” Between Ties, 26.0” Stroke, 33.5”Max. Daylight, 7.5” Min. Mold, InjectvisorSII Control, HopperTOSHIBA 170-Ton, Model ISE170N-9A,S/N 861509, New 1988, 12.5 oz Shot,29.29” Platen, 20” x 20” Between Ties,26.0” Stroke, 33.5” Max. Daylight, 7.5”Min. Mold, Injectvisor 500 Control,Hopper; TEMPTEK Oil TemperatureController, Model TC-1, S/N 3-6-2333,9KW, 3/4-HPTOSHIBA 120-Ton, Model ISE120N-5A,S/N 805188, New 1987, 8.1 oz. Shot, 24”x 24” Platen, 16” x 16” Between Ties,20.1” Stroke, 27.6” Max. Daylight, 7.5”Min. Mold, Injectvisor 300 Control,Hopper; ADVANTAGE SENTRA 2000LETemperature Controller, ModelSK1035LE-41C1, S/N 48392, 10KW, 3/4-HPPLASTIC SUPPORT

NELMOR 75-HP Granulator, ModelG2244, 22” x 44” Front Opening, w/5-HPBlower & Cyclone SeparatorBALL & JEWELL 40-HP Granulator,Model VGM1634, 16” x 34” FrontOpening, Model F614 Blower, 5-HP,Cyclone Separator, Model HE150

AEC NELMOR 5-HP Granulator, 8” x10” Front OpeningRAPID Granulator, Model 912C, 9” x12” Front Opening(2) CINCINNATI MILACRON 5-HPGranulators, Model LP0912, 9” x 12”Front & Top OpeningAEC NXLA-5Q Laser Temp Chiller, 5-HP, 45°F Min. • AEC STAC-10CH Chiller,10-HP, 20-Degree F Min. • AEC NECRT-1-50 Chiller, 50-HP/7.5-HPADVANTAGE ATS-75-3P-SP2 PTSChiller, New 1993, 25-HP/25-HP Main &Standby Pumps, 15-HP Tower PumpsTEMPTEK Chiller Tank w/20-HPNormal & Standby Pump, 10-HP TowerPumpADVANTAGE 2000HE TemperatureControllerARROW 3513-4 Pneumatic Dryer •CONAIR D100A211 Process Dryer •UNA-DYN Mobile Process Dryer w/(2)Drying HoppersAEC WHITLOCK 400-lb. Hopperw/Whitlock Dryer • NOVATEC 300-lb.Mobile Hopper w/2004 NOVA Dryer •NOVATEC 200-lb. Mobile Hopper w/MD-50 Process Dryer • CONAIR Dry-HopHopper, w/Conair Carousel Dryer(3) CONAIR CM1CC1SAA0000 DustBeater Vacuum Loaders(4) DME Hot Runners to 6-Zones(4) BRANSON 8400 Sonic Welders (outof service)(2) BRYANT Sonic Welders

OBI PRESSESCLEARING 200-Ton OBI Press, Model200-P-701-OBI, S/N 54-2284, 54” x 35”Bolster, 8” Stroke, 5” Adj., 23-1/2” ShutHeight, 32-SPM, Air Clutch, JAYBIRDFeeder & Straightener, Model J253618,S/N 2459; AMERICAN STEEL LINE 10,000-lb. Uncoiler, Model 1000, S/N 5918BLISS 110-Ton OBI Press, Model C110,S/N H-71598, 48” x 28” Platen, 8”Stroke, 4” Slide Adjustment, 17” Shut

Height, 30-60 SPM, Air ClutchBLISS 110-Ton OBI Press, Model C-110, S/N H7124, New 1993, 42” x 27”Bolster, 8” Stroke, 4” Slide Adj., 17” ShutHeight, Air Clutch, Triad Brake Monitor,Sick Light Curtain; DALLAS Feederw/Stock Straightener, Model D250-18-12RH, S/N 19599, .090” x 18W x 12S; DAL-LAS Uncoiler, Model DPR-818, S/N 18344, 16”- 21” ID, 18” Width, 60” OD Max.BLISS 60-Ton OBI Press, Model 21-1/2,31” x 21.5” Platen, Air Actuated Clutch

GAP FRAME PRESSES

PACIFIC 250-Ton Gap Frame Press,Model 250PF, S/N 5241, 54” x 30" Bed,12" Stroke, Light CurtainSTAMTEC 80-Ton Gap Frame Press,Model G1-80, S/N S80831, New 1998,39.37” x 21.65” Bolster, 22.05” x 16.54”Slide, 13.0” Die Height, 3.15” Slide Adj.,10-HP, Shadow VI Light Curtain, AirClutch & Brake, Wintress Pro Cam 1500,Palm Control; DALLAS .090” x 18”Feeder, Model D20018x24RH, S/N18450; Stock .060” x 18” Straightener,Model RTS-203, S/N 20703USI 50-Ton Gap Frame Press, ModelHG-50-16, S/N H5071, 48” x 30” Platen,Palm Control50-Ton (Est.) Hydraulic Gap FramePress(2) ROUSSELLE Gap Frame Presses,Model 4-W, S/N 1379 & 15978, 14” x 48” Platen

AUCTIONCATALOG

Visitwww.myronbowling.com

3-5 days beforethis action

6


MAZAK 16” X 80” GAP BED ENGINE LATHE

KINGSTON 25” X 82” GAP BED ENGINE LATHE

TARNOW 22” X 114” GAP BED ENGINE LATHE

CUSTOM 300-TON 4-POST DEEP DRAW HYDRAULIC PRESS

CUSTOM 275-TON 4-POST DEEP DRAW HYDRAULIC PRESS

TANGENT LMD800E 90-TON DEEP DRAW PRESS

(2) TANGENT 90-TON DEEP DRAW PRESSES

AFM 28” X 60” GAP BED ENGINE LATHE

TOS 18” X 80” GAP BED ENGINE LATHE

AMERICAN PACEMAKER 48” X 98” GEARED HEAD ENGINE LATHE

7


DECKEL DC25-C SINKER TYPE EDM

SHARP 3-HP VERTICAL MILL (2) ALLIANT 2-HPVERTICAL MILLS

MAHO UNIVERSAL VERTICAL MILL TREE & COMET VERTICAL MILLS

HANSVEDT CINTROJET SM-200B SINKER TYPE EDM

MILL HOLD DOWN TOOLING

DEEP DRAW PRESSES

Custom 300-Ton 4-Post Deep DrawHydraulic Press, 35” x 19-1/2” BetweenPosts, 75-HP/400-Gallon HydraulicSystem, Foto Shield Electric EyesCustom 275-Ton 4-Post Deep DrawHydraulic Press, 25” x 13-1/2” BetweenPosts, 25-HP/150-Gallon HydraulicSystem, Foto Shield Electric EyesTANGENT 90-Ton Deep Draw Press,Model LMD800E, S/N 800068, New1987, 4-Cylinder, 27” x 27” Platen(2) TANGENT 90-Ton Deep DrawPresses, New 1992, S/N 1872 & 1873,4-Cylinder, 31” x 31” Platen, LightCurtainCustom 60-Ton 4-Post Draw Press, 32”x 45” Platen, 16” x 37” Between Posts,Hydraulic Power Unit

POWDER COATSPRAY LINE

Powder Coat Spray Line Including (1)NORDSON Automatic 4-Gun SprayBooth, Versa Spray Controls w/24” x 27”Openings, (3) NORDSON Rotary Sieves,(1) Stainless Steel 3-Stage Heated WashLine, 1,500,000 BTU & (1) BlasdelInfrared Curing OvenPRECISION QUINCY 3-Stage WashLine, Gas Fired, Approx. 500’ MonorailConveyor, New 1998

EDM’SDECKEL DC25-C Sinker Type EDM,S/N 0481-0185, New 1986, Travels:19.68” X-Axis, 13.77” Y-Axis, 11.81” Z-Axis, 17-3/4” x 25-1/2” T-Slot Table, 3RRobomatic Tool Changer, Deckel MultiForm 2 ControlHANSVEDT Cintrojet SM-200B SinkerType EDM, S/N H06111, 30” X-Axis, 20”Y-Axis, 14” Z-Axis, 12” x 20” T-Slot Table,21.5” x 35.0” x 14.0” Tank, 3-R ToolHolder, H-Pulse 1004 Power Supply

LLAATTHHEESSTARNOW 22” x 114” Gap Bed EngineLathe, Model TUJ-50M, S/N 0983-2203,16” 4-Jaw Chuck, 22” Swing Over Bed,32” Swing Over Gap, 14” Swing OverCarriage, 114” Between Centers, 20-1600 RPM, 3-1/2” Thru Spindle, SteadyRest, Inch/Metric Threading, Coolant, (2)Removable Chip Pans, Aloris Tool Post,Copy Rite Hydraulic Tracer, Model CR-5,S/N 679-713AMERICAN PACEMAKER 48” x 98”Geared Head Engine Lathe, S/N72952-52, 32” & 45” 4-Jaw Chuck, 48”Swing Over Bed, 32” Swing OverCarriage, 98” Between Centers, 6-600RPM, Threading, Coolant, Tool Post, 2-Axis DROKINGSTON 25” x 82” Gap Bed EngineLathe, Model HR2000, S/N 02691015,New 1981, 21” 4-Jaw Chuck, 25” SwingOver Bed, 36” Swing Over Gap, 14”Swing Over Carriage, 82” BetweenCenters, 20-288 RPM, 4” Thru Spindle,Inch/Metric Threading, Taper Attachment,Steady Rest, CoolantTOS 18” x 80” Gap Bed Lathe, Model45B, S/N 04527488, 12” 3-Jaw Chuck,18” Swing Over Bed, 28” Swing OverGap, 10” Swing Over Carriage, 80”Between Centers, 24-2000 RPM, 2-1/8”Thru Spindle, Threading, Tool Post,Removable Chip Pan, Coolant, CopyRite Hydraulic Tracer, Model CR-3, S/N582-880MAZAK 16” x 80” Gap Bed EngineLathe, S/N 3525, 15-1/2” 4-Jaw Chuck,16” Swing Over Bed, 26” Swing OverGap, 12” Swing Over Carriage, 80”Between Centers, 37-1500 RPM, 3-1/4”Thru Spindle, Inch/Metric Threading, (2)Removable Chip Pans, Steady Rest,Coolant, Tool Post, Mitutoyo 2-Axis DROAFM 28” x 60” Gap Bed Lathe, S/N4252, 12” 4-Jaw Chuck, 28” Swing OverBed, 10” Swing Over Carriage, 60”

Between Centers, 18-1600 RPM, 2” ThruSpindle, Threading, Removable ChipPanTOS 28” x 40” Gap Bed Lathe, ModelSN50B, S/N 050100820286, 10” 3-JawChuck, 20” Swing Over Bed, 28” SwingOver Gap, 10” Swing Over Carriage, 40”Between Centers, 22-2000 RPM, 2” ThruSpindle, Threading, Removable ChipPan, Tool Post, CoolantMORI SEIKI 16” x 46” Engine Lathe,Model MS-1250, S/N 12524, 10” 3-JawChuck, 16” Swing Over Bed, 10” SwingOver Carriage, 46” Between Centers, 1-3/8” Thru Spindle, Threading, FootBrake, Tool Post, Steady Rest, Mitutoyo2-Axis DRO(3) SOUTH BEND 16” x 40” EngineLathes, 8” 3-Jaw Chuck, 16” Swing OverBed, 9” Swing Over Carriage, 40”Between Centers, Threading, 1-1/4” ThruSpindleVICTOR 16” x 40” Engine Lathe, Model1640B, S/N 40090597, 16” Swing OverBed, 9” Swing Over Carriage, 40”Between Centers, 55-2000 RPM, 2” ThruSpindle, Foot Brake(9) VICTOR 16” x 30” Engine Lathe,Model 1630B, No Chucks, 16” SwingOver Bed, 9” Swing Over Carriage, 30”Between Centers, 55-2000 RPM, 2” ThruSpindle, Foot Brake, S/N’s 79010216,69071594, 59092023, 29102043,49010162, 6907154, 79010144,59102258, 69071611HARDINGE 10” x 18” Toolroom Lathe,Model HVL-H, S/N H-13374, 1.5-HP, 10”Swing Over Bed, 6” Swing OverCarriage, 18” Between Centers,Tailstock, 125-3000 RPM, VariableSpeed Carriage, Mitutoyo 2-Axis DROHARDINGE Toolroom Lathe, ModelHCT, S/N 27351, 1-HP, Hexagonal TurretVariable Speed Carriage(3) 15” 4-Jaw Chucks, (1) 14” 4-JawChuck, (2) 12” 4-Jaw Chuck, 5C Collet

Chucks, Live Centers, Tailstock Chuck,(4) Steady Rests, Lathe Dogs, Soft Jaws

MILLSSHARP 3-HP Vertical Mill, 9” x 50” T-Slot Table, Servo 150 Table Feed, 60-4500 RPM, 2-Axis DROBRIDGEPORT 2-HP Vertical Mill, SeriesI, 9” x 48” T-Slot Table, Servo 100 TableFeed, 60-4200 RPM, 2-Axis DRO(2) ALLIANT 2-HP Vertical Mills, 9” x42” T-Slot Table, Servo 1000 Table Feed,60-4500 RPM, 2-Axis DRO, w/KurtPower Draw BarMAHO Universal Vertical Mill, ModelMH-600E, 19.5” Rotary T-Slot Table, 80-4000 RPMBRIDGEPORT 1-1/2 HP Vertical Mill, 9”x 42” T-Slot Tale, 60-4200 RPM, AnilamWizard 2-Axis DROTREE 1-HP Vertical Mill, Model 2UV,10-1/2” x 42” T-Slot Table, 140-3500RPMCOMET Vertical Mill, 14” x 60” T-SlotTable, 3-Axis DROBRIDGEPORT 90-Degree Milling Head,Lots of Mill Hold Down Tooling

3-R EDM TOOLING

UNABLE TOATTEND?

BID ONLINE INREAL TIME AT

WWW.BIDSPOTTER.COM

11 OOFF 22

8


KENT 12” X 24” HYDRAULIC SURFACE GRINDER CHEVALIER 6” X 18” SURFACE GRINDER HARIG 6” X 12”SURFACE GRINDER

MARVEL SERIES 8 VERTICAL BAND SAW

LEIFELD PNC75R SPINNING LATHE

LEIFELD CNC900/2S SHEAR FORMER

ROLL-IN BAND SAW PARX UM30 SPINNING LATHE

LEIFELD PNC90 SPECIAL SPINNING LATHE

CINCINNATI HYDROSPIN SHEAR FORMER

9


DENN RPI600 SPINNING LATHE LEIFELD ARS300CNC-2/2 SPINNING LATHE

(4) LEIFELD PNC90 SPINNING LATHES LEIFELD PNC50 SPINNING LATHE

SHEAR FORMERSLEIFELD CNC900/2S Shear Former,S/N 10.3988.0, New 1993, 4-Axis / 2-Roller, DIN 13 Hub, Electric Ball ScrewAll 4-Axis, (1) Overhead Finisher, 100-HP, Water Cooled Spindle, 1200 RPM,Frames & Tailstock, ProgrammableTailstock w/60” Travel, 9’ Tool Travel,96” x 3/4” Blank, 11’ Between Centers,Travel of Slide: 7’ Long./ 2’ Traverse,(2) 2,000,000 BTU Preheat Torches,Siemens Sinumerik System 3 ControlCINCINNATI Hydrospin ShearFormer, S/N 55S-300054-1, 4-Axis / 2-Roller, 30-HP, 2X Tracer, 24” Max.Blank, 24” Between Centers(Installation not Completed)SPINNING LATHES

DENN RPI600 Spinning Lathe, S/N6802, 2-Axis / 1-Roller, Playback &CNC w/CNAR 475 Control, 50-HP, ACDrive, 1,000-RPM VS, Adj. Tailstock,(1) Aux. Trim Unit, (X) Axis Hyd. & (Z)Axis Ball Screw/Hyd., DIN 11 Hub, 46”Max. Blank, 60” Between Centers,Travel of Slide: 34” Long. / 24”Traverse, Thrust of Slide: 60Kn Long.,50Kn TraverseLEIFELD ARS300CNC-2/2 SpinningLathe, S/N 10.2507.0, New 1988, 2-Axis, System 260 Control, DC SpindleDrive, 3,000-RPM VS, 6-Tool Turret,DIN 6 Hub, 19.7” Max Blank, 26.6”Between Centers, Travel of Slide: 29”Long. / 16” TraverseLEIFELD PNC250 Spinning Lathe,S/N 10.4233.0, New 1994, 2-Axis / 1Roller, Playback & CNC w/System 250Control, 2,500-RPM, 2-Speed, ACDrive, Fixed Tailstock, (1) OverheadFinisher, Single Tool, (X) & (Y) AxisHyd., 18” Max. Blank, DIN 6 Hub,19.7” Max Blank, 26.6” Between

Centers, Travel of Slide: 11.8” Long. /10” Traverse, Complete Leifeld Rebuild1994LEIFELD PNC75R Spinning Lathe,S/N 10.3322.0, New 1994, 2-Roller / 2-Axis, Playback & CNC w/System 260Control, 5,000-RPM VS, AC VectorDrive Spindle, Adj. Tailstock w/AutoRotation Device, (1) OverheadFinisher, (1) Underarm Finisher, 2-ToolDouble Roller Holder, (X) Axis Hyd. &(Z) Axis Ball Screw Hyd., DIN 6 Hub,29.5” Max. Blank, 32.5” DistanceBetween Centers, Travel of Slide:13.8” Long. / 7.9” Traverse(2) LEIFELD PNC90 SpinningLathes, 2-Roller / 2-Axis, Playback &CNC w/System 260 Control, DCSpindle Drive, 3,000-RPM VS, Adj.Tailstock, (1) Overhead Finisher, (1)Underarm Finisher, 2-Tool DoubleRoller Holder, (X) Axis Hyd. & (Z) AxisBall Screw/Hyd., DIN 8 Hub, 30” Max.Blank, 36.4” Between Centers, Travelof Slide: 17.7” Long. / 12” Traverse,S/N 10.3331.0, New 1993 • S/N10.3005.0, New 1990LEIFELD PNC90 Special SpinningLathe, S/N 10.3330.0, New 1993, 2-Roller / 2-Axis, Playback & CNCw/System 260 Control, Extended (X) &(Z) Axis, Extended Ejector, DC SpindleDrive w/2-Speed Gear Box, 3,000-RPM VS, (1) Overhead Finisher, (1)Underarm Finisher, (X) Axis Hyd. & (Z)Axis Ball Screw/Hyd., DIN 8 Hub, 36”Max. Blank, 54” Between Centers,Travel of Slide: 30” Long. / 19”TraverseLEIFELD PNC90 Spinning Lathe, S/N10.449.0.0, 2-Roller / 2-Axis, Playback& CNC w/System 260 Control, 3,000-RPM VS, AC Vector Spindle Drive, Adj.Tailstock, (1) Overhead Finisher, (1)

Underarm Finisher, (2) Tool DoubleRoller Holder, (X) Axis Hyd. & (Z) AxisRollerball/Hyd., DIN 8 Hub, 32” Max.Blank, 36.4” Between Centers, Travelof Slide: 35.4” Long. / 17.7” TraverseLEIFELD PNC-90 Spinning Lathe,S/N 10.2252.0, 1-Roller / 2-Axis, LeicoSystem 199 Control, 3000 RPM, 35.4”Max Blank, 36.4” Between Centers,17.7” Long. Travel of SlideLEIFELD (Leico) PNC50 SpinningLathe, S/N 10.4574.0, New 1997, 2-Roller / 2-Axis, Playback & CNCw/System 260 Control, 3,000-RPMVS, AC Vector Spindle Drive, FixedTailstock, (2) Overhead Finishers, (1)Underarm Finisher, 2-Tool DoubleRoller Holder, (X) & (Z) Axis Hyd., DIN6 Hub, 18” Max. Blank, 26.6” BetweenCenters, Travel of Slide: 11.8” Long. /10” TraversePARX UM30 Spinning Lathe, S/N4041, New 1982, Custom Built, 2-Axis,Playback & CNC w/NUM Control, ACVector Spindle Drive, 3,000-RPM VS,Adj. Tailstock, (1) Overhead Finisher,Single Tool, (X) Axis Hyd. & (Z) AxisElectric Ball Screw, DIN 6 Hub, 24”Max. Blank, 28” Distance BetweenCenters, 26" Long. TravelAUTO SPIN Lathe, Model AS-24.10CNC

INSPECTIONCORDAX 1808-M CMM, Open Side,PH-8 ProbeHeight Gauges, Dial Calipers, PITapes, OD Mics & Mic Sets, GraniteSurface Plates

GRINDERSKENT 12” x 24” Hydraulic SurfaceGrinder, Model KGS-306A-D, S/N871154-6, Auto/Hand Feeds, 12” x 24”Electromagnetic Chuck, 15” Under

Wheel to TableBROWN & SHARPE 6” x 18” HandFeed Surface Grinder, Model No. 2,6” x 18” PMC, 10” Under WheelCHEVALIER 6” x 18” SurfaceGrinder, Model 618M, S/N A387B052,6” x 18” PMC, Hand Feeds, 13” UnderWheel to Table, CoolantHARIG 6” x 12” Surface Grinder, 6” x12” PMC, Hand Feeds, 13” UnderWheel to TableNORTON 6” x 18” Universal Grinder

SAWSMARVEL Series 8 Vertical Band Saw,Model MK-1, S/N 821062, Tilt/TravelingHead, 18” Throat x 21” Max.Thickness, 33” x 23” Work Table, 50-450 FPM, Manual ViseGRIZZLY 14” Vertical Band Saw,Model G1019, 14” Throat x 6” Max.Thickness, 14” x 14” TableROLL-IN Band Saw, 9” Throat x 8”Max. Thickness, 30-1/2” x 18-1/2”Table, 60” Gauge ArmBLACK & DECKER 14” AbrasiveChop Saw • BEWO 350NF Cold Saw •DELTA 10” Table Saw

11 OOFF 44

COPY RITE CR-3 HYDRAULIC TRACER

10


ROPER WHITNEY PEXTO 60” X 10-GA. HYD. SQUARING SHEAR

BETENBENDER 6’ X 1/2” HYD. SQUARING SHEAR

BLUE VALLEY 3/8” RING & CIRCLE SHEAR

(15) CUSTOM 4-POST TRIM PRESSES ARCAN 40-TON SHOP PRESS PARKER HANNIFIN 32-TON C-FRAME PRESS

PARKER HANNIFIN C-FRAME PRESS

BALDOR 8” ¾-HP DOUBLE ENDPEDESTAL GRINDER

DIP TYPE 2-TANK WASH & DEGREASING LINE PRECISION QUINCY 3-STAGE WASH LINE

GARDNER DENVER EBH-QJC 50-HP ROTARY SCREW AIR COMPRESSOR

ZEKS HEAT SINK AIR DRYER HYDRO POWER 10-TON TRAVELING GANTRY

BURR KING 1” BELT GRINDER

EAGLE PICHER T1500 15,000-LB. FORKLIFT

(2) HYSTER 8,000-LB. BOX CAR SPECIAL FORKLIFTS

CATERPILLAR T50E5,000-LB. FORKLIFT

ROYAL T300V 30,000-LB. FORKLIFT

22 OOFF 1155

22000077

11


ALVAREZ 14-STAND ROLL FORMER GRIZZLY 48” X 16-GA. FINGER BRAKE JET 50” X 16-GA. POWER TURNING ROLLS

HOBART BETA-MIG 200 MIG WELDER

MILLER CP-300 MIG WELDER

JETLINE HORIZONTAL SEAM WELDER APPROX. 300-SECTIONS PALLET RACKING & CANTILEVER RACKING

SHEARSROPER WHITNEY PEXTO 60” x 10-Ga. Hyd. Squaring Shear, Model 10-H-5, 36” PBGBETENBENDER 6’ x 1/2” Hyd.Squaring Shear, 36” PBGBLUE VALLEY 3/8” Ring & CircleShear, Model 60, 84” Dia., 23” ThroatPARX Model KSM/48 & OMERAModel ODT-380 Circle Shears

FABRICATINGALVAREZ 14-Stand Roll Former, S/NC-15-8-62392 w/Controls, 10-HP;AMERICAN STEEL LINE 2,500-lb.Uncoiler, Model 60, S/N 8884,Pneumatic 4-Post Notching Station,Pneumatic 4-Post Cutoff StationAMERICAN STEEL LINE 10,000-lb.Uncoiler • NORTHERN 30” ComboHand Brake/Roll Former • GRIZZLY48” x 16-Ga. Finger Brake • 24”Manual Bench Top Brake • JET 50” x16-Ga. Power Turning Rolls • 24”Power Turning Rolls • HEINRICHModel 6 Hand Punch • WHITNEY 6”Notcher • DALLAS .090” x 18” Feeder,Model D250-18X25RH (out of service)

ASSORTEDPRESSES

(15) Custom 4-Post Trim Presses,24” x 24” Platen, 18” x 18” BetweenPosts, 5-HP Self-Contained Hydraulics,Sick Light Curtains40-Ton Shop Press • Several C-Frame Presses • Arbor Presses

WELDERS &RELATED

LINCOLN 60-AMP Plasma Cutter,Model Pro-Cut 60(4) Welding Positioners • (5) MIGWelders • TIG Welder • Sonic Welders• Seam Welder • Stick Welder •Resistance WelderOxy/Acetylene Bottle Cartw/Regulators & PartsAIR COMPRESSORS

& DRYERS(6) Rotary Screw Type AirCompressors - JOY Twistair 370 75-HP • IR SSR-EP75 • (2) GARDNERDENVER 50-HP • (2) GARDNER

DENVER 30-HP w/Auto Sentry SControlCAMPBELL HAUSFELD 5-HP AirCompressor, 80-Gallon Vertical Tank(out of service)IR TM-400 & HYDRO GUARDRefrigerated Air Dryers • ZEKS HEATSINK Cycling Air Dryer1,000-Gallon & (2) 300-GallonReceiver Tanks

CRANESHYDRO POWER 10-Ton TravelingGantry, 36’ Span, 160’ Length,Pendant ControlHYDRO POWER 5-Ton x 100' FreeStanding Bridge System, TopRunning Single Girder Bridge,Underhung Hoist, Pendant Control14' Span Rolling A-Frame GantryCrane • (2) 2-Ton Chain Fall Hoists •8-Ton Rolling Shop Hoist

FORKLIFTSROYAL 30,000-lb., Model T300C, Propane, Side ShiftEAGLE PICHER 15,000-lb., ModelT1500, LP, 129” Lift, Side Shift,Cushion Tires, ROPSCATERPILLAR 8,000-lb., ModelT80DSTR, LP, 188” Lift, Side Shift,Solid Tires, ROPSCATERPILLAR 8,000-Lb., ModelGC40K, Propane, Four Stage mast(4) 2008 HYSTER 8,000-lb., ModelS80FT-4, LPG, Solid Tires, 3-StageMast, 195" Lift, Cascade Single-Double Pallet Handler(2) 2007 HYSTER 8,000-lb. Box CarSpecial, Model S80FT-BCS-4, LPG, 3-Stage Mast, 195" Lift, Side Shift, SolidTires(3) CATERPILLAR 6,000-lb., Model C6000, Propane, Side ShiftCATERPILLAR 5,000-lb., ModelT50E, LP, Side Shift, 173” Lift, SolidTire, ROPSHYSTER 3,200-lb., Model E30BS,Electric, 130” Lift, Side Shift, SolidTires, ROPS(2) 4,000-lb. Walkie & (6) StandupLift Trucks to 3,500-lb.RAYMOND 3,000-lb. Narrow AisleElectric Lift w/Swing Mast, Model537-CRS-30T, 322” Lift, Inetellidrive 2Boom & Die Lifts, Personnel Carrier,

Man Lift, Maint. Carts, Pallet Jacks, LiftTruck Repair PartsTRUCK & TRACTOR1982 INTERNATIONAL CITY S2155S/A Tractor, 6-Speed, Fixed 5thWheel, 144” Wheel Base, VIN1HTDA2154CHA221631997 CHEVROLET 3/4-TonCheyenne 2500 Pickup, 181,500Miles, VIN 1GCGC24R3VZ178157MISCELLANEOUS

Dip Type 2-Tank Wash & DegreasingLine, 40” x 60” x 60” Usable Tank AreaPRECISION QUINCY 3-Stage WashLine, 15” x 38” Openings, 26” SteelBelt, Coolant Cat Mist CollectorDRI QUICK 4-CG-15x60 InfraredDrying Tunnel, 11” x 39” Openings,150,000 BTUSANBORN US-1500T EnvironmentalWaste Water System, Process &Waste Water TanksCRESS C-212ITCZ Electric Furnace,10” x 9” x 8” IDAIR TECHNICAL 6,000-lb. HydraulicTilterECONOLINE RA-36-1 Abrasive BlastCabinetRED LION BIG CAT Type B ConcreteMixer30-HP & 10-HP Hydraulic PowerUnitsBANNER 10-Ton Body & Frame KitCustom 4-Station Pneumatic PunchCOPY RITE CR-3 Hydraulic TracerEMI RMC 36.15.20 Incline Conveyor,36” GatedAssorted Sections of Belt & RollerConveyorApprox. 300-Sections Pallet Racking& Cantilever RackingTRION TEPCO Portable MistCollector w/Fume Hood(10) Secondary Operation FlangingMachinesTOLEDO & HOWE 2,000-lb. In-FloorBalance Scales(2) NATIONAL RIVET RivetersMILWAUKEE Heavy Duty Mag BaseDrillGRECO Mini File Loader3-R EDM ToolingLarge Parts Repair InventoryIncluding Bearings, Seals &Hardware

Drill Presses to 20" Swing, Grinders,Sanders, Ironworker’s Anvil, Belt Lacer,Hose Crimper, Pipe Stands, Floor Jack& Stands(3) Electric Sump Pumps, (14)Stainless Hot Water Parts Cleaners,Recirculating Parts Washer, FloorScrubbers, Baler, Stretch Wrappers,Box Staplers60-Gallon Flammable StorageCabinet, (375+) Knock-Down Baskets,Steel Layout & Die Tables, Die Carts,Storage Cabinets, Shelving &Benches, Dump Hoppers, RollerStands, Ladders, Fans, Air CirculatorsRotabs, 5C Collet Indexers, HandTools, Bolt Cutters, Pipe Wrenches, C-Clamps, Perishable Tooling, Conduit &Benders, Vise Grips, Bottle Jacks,Bearing Splitters, Fan & Heater Parts,Filters, Electrical Wiring, PlumbingParts

OFFICEDesks, Chairs, File Cabinets,Credenzas, Bookcases, PentiumComputers, Fax Machines, Scanner,Battery Backup System • HP 750CPlotter • HP LaserJet Printers • (2)Sharp Copiers

SP BALER

H H H H H H H H H HH H H H H H H H H HH H H H H H H H H HH H H H H H H H H HH H H H H H H H H HH H H H H H H H H HH H H H H H H H H HH H H H H H H H H HH H H H H H H H H H

PUBLIC PUBLIC

DIRECTIONS

Buyer's Premium: 15% Onsite, 18% OnlineIILLLLIINNOOIISS AAUUCCTTIIOONN LLIICCEENNSSEE NNUUMMBBEERRSS

Myron C. Bowling 44-1000548 • Myron Bowling Auctioneers, Inc. 444-000274Michael Ackerman - 440-000539 • Jeffrey Luggen 041-00038

AUCTIONEERSIMPORTANT NOTICE:

H H H H H H H H H HH H H H H H H H H HH H H H H H H H H HH H H H H H H H H HH H H H H H H H H HH H H H H H H H H HH H H H H H H H H HH H H H H H H H H HH H H H H H H H H H PLANT CLOSED

PUBLIC PUBLIC

All of the above is sold ”as is”, “where is” to the highest bidder orbidders for cash in accordance with our regular terms and condi-tions of sale. A deposit of 25% on all purchases is required in cash,certified or cashier’s check, made payable to Myron BowlingAuctioneers, Inc. Firm or personal checks accepted only if accom-panied by a letter of credit from your bank guaranteeing yourfunds. Balance due at conclusion of sale. All sales are subject tostate and/or local sales tax, unless a signed exemption form is pre-sented at the time of purchase. No merchandise may be removedwhile the sale is in progress. 15% buyer’s premium in effect forin-person bidding and 18% for online bidding at this sale.

TERMS OF SALEFFrroomm II--7700 WWeesstt ooff TTeerrrraa HHaauuttee,,IInnddiiaannaa,, ttaakkee EExxiitt ##112299 IILL--4499.. TTuurrnnSSoouutthh aanndd ggoo 11..55 mmiilleess ((NNOOTTEE:: ccaarrddeeaalleerrsshhiipp oonn tthhee lleefftt ssiiddee ooff IILL--4499))..TTuurrnn rriigghhtt oonnttoo DDeellaawwaarree && ffoollllooww ttootthhee eenndd ooff tthhee ssttrreeeett..

CCoommffoorrtt IInnnn - (877) 424-6423933 N. State Hwy 49, 62420

DDaayyss IInnnn (800) - 329-7466810 W Lincoln Ave. 61920

HHoolliiddaayy IInnnn EExxpprreessss - (800) 465-4329121 Swords Dr. 61938

NEW1984

FIRST CLASS MAIL!

Important MailTO BE DIRECTED TO THE ATTENTION OF EXECUTIVE PERSONNEL�

PRE-SORTFIRST CLASS U.S. POSTAGE

PAIDCINCINNATI, OHIOPERMIT NO. 5714

Myron Bowling AuctioneersP.O. BOX 369 ROSS, OHIO 45061

LODGING

Although information has been obtained from sources deemedreliable, the auctioneer makes no warranty or guarantee,expressed or implied, as to the accuracy of the informationherein contained. It is for this reason that buyers should availthemselves of the opportunity to make inspection prior to thesale. This brochure is intended to provide general information ofthe equipment being offered and is subject to errors, omissions,additions or deletions. Please check with the Auctioneer’s Office fora final listing. Items offered may or may not necessarily be sold asdescribed and/or photographed in this brochure.

MAIL BIDS ACCEPTED WITH A 25% DEPOSIT

(12) SPINNING LATHES ERFURT 2000-KN TRANSFER PRESS

(11) PLASTIC INJECTION MOLDERS TO 1450-TON

STAMPING, MOLDING, TOOL & DIE, FAB

CASEY TOOL & MACHINE CO.AKA inSync Manufacturing, LLC400 W. Delaware Ave. in Casey, Illinios 62420


Inspection: Day Prior to auctionfrom 9AM - 5PM

CASEY TOOL & MACHINE CO.AKA inSync Manufacturing, LLC

400 W. Delaware Ave., Casey, Illinois 62420


Inspection: Day prior to auctionfrom 9AM-5PM

Cincinnati Industrial Auctioneers Inc.2020 DUNLAP ST., CINCINNATI, OHIO 45214PH (513) 241-9701 / FAX (513) 241-6760INTERNET: www.cia-auction.com

Cincinnati Industrial Auctioneers Inc.

PPL AuctionA DIVISION OF PPL GROUP LLC3100 DUNDEE ROAD., SUITE 915NORTHBROOK, ILLINOIS 60062PH (224) 927-5300 / FAX (224) 927-5311INTERNET: www.pplauction.com

PPL AuctionMyron Bowling Auctioneers Inc.P.O. BOX 369 ROSS, OHIO 45061PH (513) 738-3311 / FAX (513) 738-0221INTERNET: www.myronbowling.com

Myron Bowling Auctioneers Inc.

www.pplauction.com

www.pplauction.com

Documents

BIDI SEE OR N-P PUBLIC PUBLIC PAGE O NLI ERSO NE.N …s3.serverdata.com/ · INTERNET: Cincinnati Industrial Auctioneers Inc. PPL Auction ... Control, PRC Laser, 3500 Watts, 48”