(BIDDER NEED TO QUOTE PRICE’ IN PRICED SOR) · ENGINEERS INDIA LTD Date Bidder's ... ENGINEERING Dept.:Piping SHEET 1 OF ... line supports as per EIL pipe support standard having

PRICED SCHEDULE OF RATES

(BIDDER NEED TO QUOTE ‘PRICE’ IN PRICED SOR)

The drawing, design and details given in this format are the property of ENGINEERS INDIA LIMITED. They are merely loaned on the borrower's express agreement that they will not be reproduced, copied, exhibited or used, except in thelimited way permitted by a written consent given by the lender to the borrower for the intended use. EIL 1641-1915, Revision 1.A4 297 x 210.

ENGINEERS INDIA LTD

Date Bidder'sSignature

Bidder'sStamp Div.:

Mechanical Works

Schedule of Ratesfor

Client : BRAHMPUTRA CRACKER & POLY.LTProject : BCPL CRACKER COMPLEX, ASSAM

TenderName

BALANCE INSULATION WORKS ATLAKWA

REV DATE PURPOSE BY CHECKED APPROVED

PipingDept.:ENGINEERING 1SHEET OF

06907-11-16-43-MH-SOR-3070-0

SCHEDULE OF RATES Rev

0 MI

NEW DELHI

6907-11-16-43-MH-T-3070Tender No. 0Part

27

The drawing, design and details given in this format are the property of ENGINEERS INDIA LIMITED. They are merely loaned on the borrower's express agreement that they will not be reproduced, copied, exhibited orused, except in the limited way permitted by a written consent given by the lender to the borrower for the intended use. EIL 1641-1915, Revision 1.A4 297 x 210.

ENGINEERS INDIA LTDSCHEDULE OF RATES Rev


Bidder'sStamp Div.: Dept.:

6907-11-16-43-MH-SOR-3070-0


2SHEET OF

Rate in RupeesFigures Words

Amount in Rs.QuantityUnitDescription of ItemsItem NoS. No.

0ENGINEERING Piping

NEW DELHI 27

WOODEN/HIGH DENSITY PUF SUPPORTS FOR COLDLINES :- Supply, shaping, positioning and fixing of coldline supports as per EIL pipe support standard having thefollowing specifications: Wood specification: Hard wood,chemically treated with creosote under pressure. Qualityof wood to conform class-I durability as per IS-3629 &Grade-I timber of Group-A with permissible compressionstrength of 70 Kg/cm2 perpendicular to grains as per IS-883. PUF specifications: Density for lines upto 6" NB :200 kg/cm3 Density for lines above 6" NB : 300 kg/cm3

WOODEN BLOCKS

HIGH DENSITY (200 Kg/Cu.M) PUF BLOCKS


WOODEN/HIGH DENSITY PUF SUPPORTS FOR COLDLINES :- (PUF MATERIAL SUPPLIED BY OWNER)Shaping, positioning and fixing of coldline supports as per EIL pipe support standard having thefollowing specifications:Wood Specification: Hard wood,chemically treated with creosote under pressure. Qualityof wood to conform class-I durability as per IS-3629 &Grade-I timber of Group-A with permissible compressionstrength of 70 Kg/cm2 perpendicular to grains as per IS-883. PUF specifications: Density for lines upto 6" NB :200 kg/cm3 Density for lines above 6" NB : 300 kg/cm3



PAINTING (UNITS):- Supply of Primer and Paint,preparation of surfaces/ Rubdown and application ofprimer and finish paint for touch-up work whereeveridentified for application by Engineer-in-Charge, Providing

1

2

3

4

5

6

7

8

9

M12800000000

M12801000000

M12802000000

M12803000000

M19900000000

M19901000000

M19902000000

M30000000000

M39900000000

Cu. M

Cu. M

Cu. M

Cu. M

Cu. M

0.01

2

10

3

1





6907-11-16-43-MH-SOR-3070-0


3SHEET OF



0ENGINEERING Piping

NEW DELHI 27

scaffolding for all heights, labour, material, tools andtackles, consumables supervision etc. to complete thework in all respects as per drawings and direction ofEngineer-in-Charge for insulated piping as specifiedincluding all pipes, fittings, flanges, valves etc.

PAINTING UNDER INSULATION FOR INSULATEDSURFACES FOR 'CORROSIVE' ENVIRONMENT ASPER JOB SPEC 6907-0642-PT-L07, REV 0 FORCS/LTCS/AS PIPING.

DESIGN TEMP GROUP: -45 TO 125 (DEG C)

DESIGN TEMP GROUP: 126 TO 400 (DEG C)

PAINTING UNDER INSULATION FOR INSULATEDSURFACES FOR 'CORROSIVE' ENVIRONMENT ASPER JOB SPEC 6907-0642-PT-L07, REV 0 FOR SSPIPING.

DESIGN TEMP GROUP: Below 0 (DEG C) toall minus temperature

*************************************************************** LEGENDS / NOTES FOR INSULATION WORKS***************************************************************** Types of Insulation :

IH = Insulation for Heat Coservation IT = Insulation for Steam Traced Lines IS = Insualtion for Personal safety IC = Cold Insulation for Anti-condensation IE = Insulation for Electrically traced lines

** Basic Line Surface Materials :

CS = Carbon Steel (Including LT Carbon Steel) AS = Alloy Steel

10

11

12

13

14

15

M39901000000

M39901001000

M39901002000

M39902000000

M39902001000

M5**********

Sq. M

Sq. M

Sq. M

391

339

82





6907-11-16-43-MH-SOR-3070-0


4SHEET OF



0ENGINEERING Piping

NEW DELHI 27

SS = Stainless Steel

** Notes :

1. For insulation type IT, tracer size and tracer numbersshall be as per specification.

2. Insulation thickness for IC where insulation material isPoly Urethane foam (PUF) / Poly Isocyanurate (PIC) +Cellular Glass includes outer layer of 50mm of CellularGlass and inner layer of balance thickness of PUF/PIC

3. Insulation for IE consists of Inner layer of Rockwooland Outer layer of PUF/ PIC. The thickness have beenspecified as Thk (I) and Thk (O) for inner and outer layersrespectively.

4. For Hot Insulation applicable EIL specification is 6-44-0002 and its addendum***************************************************************

HOT INSULATION (UNITS) ; Providing thermal insulationincluding supply of all insulating and ancillary materials,vapour barrier, weather protective coverings,consumables and other necessary materials , testing ofmaterials as required, including transportation ofmaterials to work site, duly inspected by 3rd partyinspector(Llyods/BV/DNV or any other Client approvedparty) at manufacturer's shop & sample check/inspectionat site by EIL Construction inspector, applying insulationon surfaces as specified including all preparatory workthere on, binding, tying, lacing, stitching and/or otherwisesecuring , finishing with sheet cladding as per spec. ,providing bolts, rivets, and self tapping screws whereverspecified , providing inspection windows, end seals forflanges etc., colour coding and identification. Providingsteel scaffolding, all tools , tackles , equipments etc. ,

16 M50000000000





6907-11-16-43-MH-SOR-3070-0


5SHEET OF



0ENGINEERING Piping

NEW DELHI 27

labour, supervision and completing the work in allrespect, at all heights as per drawings , specifications andinstructions of Engineer-in-charge. (Refer Legend forapplicable EIL specification)

INSULATION TYPE : IH; SURFACE MATERIAL : CS &AS; OPERATING TEMP. RANGE : UPTO 125 (DEG C);INSULATION MATERIAL : ROCKWOOL

PIPES

NB 0.750 INCHES; THICKNESS 35 MM





NB12.000 INCHES; THICKNESS 100 MM

BLIND FLANGE ASSEMBLIES





VALVE ASSEMBLIES



INSULATION TYPE : IH; SURFACE MATERIAL : CS &

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31

32

33

34

M50100000000

M50101000000

M50101010000

M50101010507

M50101010607

M50101011505

M50101011605

M50101011620

M50101011820

M50101030000

M50101030605

M50101030805

M50101030907

M50101031505

M50101040000

M50101041620

M50101041820

M50102000000

Metres

Metres

Metres

Metres

Metres

Metres

NOs

NOs

NOs

NOs

NOs

NOs

20

245

20

5

30

10

1

2

1

2

2

8





6907-11-16-43-MH-SOR-3070-0


6SHEET OF



0ENGINEERING Piping

NEW DELHI 27

AS; OPERATING TEMP. RANGE : 126 (DEG C) TO 350(DEG C); INSULATION MATERIAL : ROCKWOOL

PIPES




















35

36

37

38

39

40

41

42

43

44

45

46

47

48

49

50

51

52

53

54

M50102010000

M50102010411

M50102010509

M50102010510

M50102010511

M50102010512

M50102010607

M50102010611

M50102010811

M50102010907

M50102010909

M50102010910

M50102011106

M50102011111

M50102011112

M50102011309

M50102011506

M50102011508

M50102011511

M50102011606

Metres

Metres

Metres

Metres

Metres

Metres

Metres

Metres

Metres

Metres

Metres

Metres

Metres

Metres

Metres

Metres

Metres

Metres

Metres

10

5

5

25

10

15

55

90

210

5

75

15

5

230

5

25

20

240

15





6907-11-16-43-MH-SOR-3070-0


7SHEET OF



0ENGINEERING Piping

NEW DELHI 27













VALVE ASSEMBLIES


INSULATION TYPE : IS; SURFACE MATERIAL : CS &AS; OPERATING TEMP. RANGE : UPTO 125 (DEG C);INSULATION MATERIAL : ROCKWOOL

PIPES






55

56

57

58

59

60

61

62

63

64

65

66

67

68

69

70

71

72

73

74

75

M50102011609

M50102011612

M50102011709

M50102012006

M50102012020

M50102012030

M50102030000

M50102030809

M50102030905

M50102031111

M50102031112

M50102031511

M50102040000

M50102042030

M50133000000

M50133010000

M50133010405

M50133010505

M50133010605

M50133010805

M50133010910

Metres

Metres

Metres

Metres

Metres

Metres

NOs

NOs

NOs

NOs

NOs

NOs

Metres

Metres

Metres

Metres

Metres

30

5

10

5

5

220

1

2

6

3

3

10

5

10

20

5

60





6907-11-16-43-MH-SOR-3070-0


8SHEET OF



0ENGINEERING Piping

NEW DELHI 27









FLANGE ASSEMBLIES






VALVE ASSEMBLIES








76

77

78

79

80

81

82

83

84

85

86

87

88

89

90

91

92

93

94

95

96

97

M50133011305

M50133011505

M50133011605

M50133011705

M50133011805

M50133011820

M50133011830

M50133012105

M50133020000

M50133020805

M50133021305

M50133030000

M50133030905

M50133031305

M50133040000

M50133040605

M50133040805

M50133040905

M50133040910

M50133041105

M50133041305

M50133041505

Metres

Metres

Metres

Metres

Metres

Metres

Metres

Metres

NOs

NOs

NOs

NOs

NOs

NOs

NOs

NOs

NOs

NOs

NOs

45

15

50

95

30

20

45

40

2

5

1

1

4

2

47

20

18

8

2





6907-11-16-43-MH-SOR-3070-0


9SHEET OF



0ENGINEERING Piping

NEW DELHI 27


INSULATION TYPE : IS; SURFACE MATERIAL : CS &AS; OPERATING TEMP. RANGE : 126 (DEG C) TO 350(DEG C); INSULATION MATERIAL : ROCKWOOL

PIPES



INSULATION TYPE : IH; SURFACE MATERIAL : SS;OPERATING TEMP. RANGE : UPTO 125 (DEG C);INSULATION MATERIAL : INHIBITED ROCKWOOL

PIPES





INSULATION TYPE : IS; SURFACE MATERIAL : SS;OPERATING TEMP. RANGE : UPTO 125 (DEG C);INSULATION MATERIAL : INHIBITED ROCKWOOL

PIPES



FLANGE ASSEMBLIES


98

99

100

101

102

103

104

105

106

107

108

109

110

111

112

113

114

115

M50133042105

M50134000000

M50134010000

M50134012013

M50134012030

M55100000000

M55109000000

M55109010000

M55109010505

M55109010605

M55109011505

M55109011605

M55141000000

M55141010000

M55141010805

M55141011605

M55141020000

M55141020505

NOs

Metres

Metres

Metres

Metres

Metres

Metres

Metres

Metres

NOs

1

10

30

5

5

90

5

5

30

1





6907-11-16-43-MH-SOR-3070-0


10SHEET OF



0ENGINEERING Piping

NEW DELHI 27


VALVE ASSEMBLIES





HOT INSULATION (UNITS) ; (INSULATION MATERIALSUPPLIED BY OWNER)Providing thermal insulation excluding supply of insulationmaterial which shall be supplied by owner but includingsupply of all ancillary materials, vapour barrier, weatherprotective coverings, consumables and other necessarymaterials , testing of materials as required, includingtransportation of materials to work site, duly inspected by3rd party inspector(Llyods/BV/DNV or any other Clientapproved party) at manufacturer's shop & Samplecheck/inspection at site by EIL Construction inspector,applying insulation on surfaces as specified including allpreparatory work there on, binding, tying, lacing, stitchingand/or therwise securing , finishing with sheet claddingas per spec. , providing bolts, rivets, and self tappingscrews wherever specified , providing inspectionwindows, end seals forflanges etc., colour coding and identification. Providingsteel scaffolding, all tools , tackles , equipments etc. ,labour, supervision and completing the work in allrespect, at all heights as per drawings , specifications andinstructions of Engineer-in-charge. (Refer Legend forapplicable EIL specification)


116

117

118

119

120

121

122

123

M55141021605

M55141040000

M55141040505

M55141040605

M55141040905

M55141041605

M59900000000

M59902000000

NOs

NOs

NOs

NOs

NOs

1

7

1

1

1





6907-11-16-43-MH-SOR-3070-0


11SHEET OF



0ENGINEERING Piping

NEW DELHI 27

PIPES

NB 0.750 INCHES; THICKNESS 25MM









INSULATION TYPE : IH; SURFACE MATERIAL : CS &AS; OPERATING TEMP. RANGE : 126 (DEG C) TO 350(DEG C); INSULATION MATERIAL : ROCKWOOL

PIPES






124

125

126

127

128

129

130

131

132

133

134

135

136

137

138

139

140

M59902010000

M59902010505

M59902010605

M59902010705

M59902010805

M59902010905

M59902011005

M59902011105

M59902011205

M59902011305

M59903000000

M59903010000

M59903010505

M59903010605

M59903010705

M59903010805

M59903010905

Metres

Metres

Metres

Metres

Metres

Metres

Metres

Metres

Metres

Metres

Metres

Metres

Metres

Metres

10

55

15

15

55

165

30

120

20

20

5

75

5

10





6907-11-16-43-MH-SOR-3070-0


12SHEET OF



0ENGINEERING Piping

NEW DELHI 27














PIPES





INSULATION TYPE : IH; SURFACE MATERIAL : SS;OPERATING TEMP. RANGE : UPTO 125 (DEG C);INSULATION MATERIAL : INHIBITED ROCKWOOL

141

142

143

144

145

146

147

148

149

150

151

152

153

154

155

156

157

158

159

M59903011005

M59903011105

M59903011205

M59903011305

M59903011405

M59903011505

M59903011605

M59903011705

M59903011805

M59903011905

M59903012005

M59903012505

M59904000000

M59904010000

M59904010505

M59904010605

M59904010705

M59904010805

M59905000000

Metres

Metres

Metres

Metres

Metres

Metres

Metres

Metres

Metres

Metres

Metres

Metres

Metres

Metres

Metres

Metres

5

90

5

165

120

25

5

5

45

15

160

160

180

120

160

220





6907-11-16-43-MH-SOR-3070-0


13SHEET OF



0ENGINEERING Piping

NEW DELHI 27

PIPES





INSULATION TYPE : IS; SURFACE MATERIAL : SS;OPERATING TEMP. RANGE : UPTO 125 (DEG C);INSULATION MATERIAL : INHIBITED ROCKWOOL

PIPES




Removal of insulation from existing lines including allancillary materials, vapour barrier, weather protectivecoverings etc. providing scaffolding for all heights, labour,material, tools and tackles, consumables supervision etc.to complete the work in all respects as per drawings anddirection of Engineer-in-Charge for insulated piping asspecified including all pipes, fittings, flanges, valves etc.


PIPES



160

161

162

163

164

165

166

167

168

169

170

171

172

173

174

M59905010000

M59905010505

M59905010605

M59905010705

M59905010805

M59906000000

M59906010000

M59906010505

M59906010605

M59906010705

M59910000000

M59910100000

M59910110000

M59910110101

M59910110201

Metres

Metres

Metres

Metres

Metres

Metres

Metres

Metres

Metres

5

5

95

10

5

5

5

30

10





6907-11-16-43-MH-SOR-3070-0


14SHEET OF



0ENGINEERING Piping

NEW DELHI 27

VALVE ASSEMBLIES



INSULATION TYPE : IH; SURFACE MATERIAL : CS &AS; OPERATING TEMP. RANGE : 126 (DEG C) TO 350(DEG C); INSULATION MATERIAL : ROCKWOOL

PIPES


VALVE ASSEMBLIES



PIPES










175

176

177

178

179

180

181

182

183

184

185

186

187

188

189

190

191

192

193

M59910210000

M59910210101

M59910210201

M59910300000

M59910310000

M59910310101

M59910320000

M59910320101

M59910400000

M59910410000

M59910410101

M59910410201

M59910410301

M59910410401

M59910410501

M59910410601

M59910410701

M59910410801

M59910410901

NOs

NOs

Metres

NOs

Metres

Metres

Metres

Metres

Metres

Metres

Metres

Metres

Metres

2

8

220

10

80

45

60

30

40

165

60

15

45





6907-11-16-43-MH-SOR-3070-0


15SHEET OF



0ENGINEERING Piping

NEW DELHI 27

VALVE ASSEMBLIES



INSULATION TYPE : IS; SURFACE MATERIAL : CS &AS; OPERATING TEMP. RANGE : 126 (DEG C) TO 350(DEG C); INSULATION MATERIAL : ROCKWOOL

PIPES



COLD INSULATION (UNITS): Providing thermalinsulation including supply of all insulating and ancillarymaterials, Aluminium foil for SS surfaces, vapour barrier,weather protective coverings, consumables and othernecessary materials , testing of materials as required ,including transportation of materials to work site, dulyinspected by 3rd party inspector(Llyods/BV/DNV or anyother Client approved party) at manufacturer's shop &sample check/inspection at site by EIL Constructioninspector, applying insulation on surfaces as specifiedincluding all preparatory works there on, binding, tying,lacing, stitching and/or otherwise securing , finishing withcladding as per spec., providing bolts, rivets, and selftapping screws wherever specified ,providing inspectionwindows, end seals for flanges etc., colour coding andidentification. Providing steel scaffolding, all tools , tackles, equipments etc. , labour, supervision and completing thework in all respect, at all heights as per drawings ,specifications and instructions of Engineer-in-charge.(Applicable EIL specification is 6-44-0003, for ColdInsulation and its addendum.)

194

195

196

197

198

199

200

201

202

M59910420000

M59910420101

M59910420201

M59910500000

M59910510000

M59910510101

M59910510201

MA0000000000

MA0700000000

NOs

NOs

Metres

Metres

19

1

10

30





6907-11-16-43-MH-SOR-3070-0


16SHEET OF



0ENGINEERING Piping

NEW DELHI 27

INSULATION TYPE : IC; SURFACE MATERIAL : CS &AS; OPERATING TEMP. RANGE : UPTO -45 (DEG C);INSULATION MATERIAL : POLYURETHANEFOAM(PUF)

PIPES















FLANGE ASSEMBLIES




203

204

205

206

207

208

209

210

211

212

213

214

215

216

217

218

219

220

221

222

MA0765000000

MA0765010000

MA0765010406

MA0765010505

MA0765010506

MA0765010513

MA0765010515

MA0765010817

MA0765010915

MA0765011106

MA0765011107

MA0765011318

MA0765011515

MA0765011518

MA0765011817

MA0765011821

MA0765020000

MA0765021106

MA0765021817

MA0765021821

Metres

Metres

Metres

Metres

Metres

Metres

Metres

Metres

Metres

Metres

Metres

Metres

Metres

Metres

NOs

NOs

NOs

5

5

20

5

20

5

5

450

5

5

10

5

20

35

2

1

3





6907-11-16-43-MH-SOR-3070-0


17SHEET OF



0ENGINEERING Piping

NEW DELHI 27









VALVE ASSEMBLIES














223

224

225

226

227

228

229

230

231

232

233

234

235

236

237

238

239

240

241

242

243

244

MA0765030000

MA0765030505

MA0765030506

MA0765030817

MA0765031106

MA0765031113

MA0765031306

MA0765031515

MA0765040000

MA0765040505

MA0765040506

MA0765040513

MA0765040515

MA0765040605

MA0765040817

MA0765040905

MA0765040906

MA0765040915

MA0765041106

MA0765041113

MA0765041306

MA0765041313

NOs

NOs

NOs

NOs

NOs

NOs

NOs

NOs

NOs

NOs

NOs

NOs

NOs

NOs

NOs

NOs

NOs

NOs

NOs

NOs

2

6

1

1

1

2

1

6

13

4

5

1

3

3

3

4

6

7

2

4





6907-11-16-43-MH-SOR-3070-0


18SHEET OF



0ENGINEERING Piping

NEW DELHI 27




INSULATION TYPE : IC; SURFACE MATERIAL : SS;OPERATING TEMP. RANGE : BELOW -45 (DEG C);INSULATION MATERIAL : POLYURETHANEFOAM(PUF)

PIPES
















245

246

247

248

249

250

251

252

253

254

255

256

257

258

259

260

261

262

263

264

MA0765041507

MA0765041515

MA0765041821

MA0769000000

MA0769010000

MA0769010505

MA0769010520

MA0769010521

MA0769010522

MA0769010525

MA0769010526

MA0769010527

MA0769010529

MA0769010532

MA0769010543

MA0769010616

MA0769010618

MA0769010619

MA0769010621

MA0769010625

NOs

NOs

NOs

Metres

Metres

Metres

Metres

Metres

Metres

Metres

Metres

Metres

Metres

Metres

Metres

Metres

Metres

Metres

1

4

1

5

5

5

5

10

5

10

5

5

10

5

5

5

15

5





6907-11-16-43-MH-SOR-3070-0


19SHEET OF



0ENGINEERING Piping

NEW DELHI 27























265

266

267

268

269

270

271

272

273

274

275

276

277

278

279

280

281

282

283

284

285

286

MA0769010634

MA0769010811

MA0769010817

MA0769010821

MA0769010823

MA0769010824

MA0769010828

MA0769010906

MA0769010910

MA0769010918

MA0769010920

MA0769010925

MA0769010927

MA0769010932

MA0769010934

MA0769010943

MA0769011106

MA0769011120

MA0769011122

MA0769011125

MA0769011126

MA0769011127

Metres

Metres

Metres

Metres

Metres

Metres

Metres

Metres

Metres

Metres

Metres

Metres

Metres

Metres

Metres

Metres

Metres

Metres

Metres

Metres

Metres

Metres

5

5

5

20

5

5

5

5

20

5

5

200

60

5

65

5

5

95

5

5

5

75





6907-11-16-43-MH-SOR-3070-0


20SHEET OF



0ENGINEERING Piping

NEW DELHI 27























287

288

289

290

291

292

293

294

295

296

297

298

299

300

301

302

303

304

305

306

307

308

MA0769011129

MA0769011322

MA0769011324

MA0769011326

MA0769011327

MA0769011329

MA0769011334

MA0769011524

MA0769011529

MA0769011532

MA0769011610

MA0769011624

MA0769011629

MA0769011630

MA0769011632

MA0769011634

MA0769011639

MA0769011643

MA0769011730

MA0769011828

MA0769011834

MA0769011938

Metres

Metres

Metres

Metres

Metres

Metres

Metres

Metres

Metres

Metres

Metres

Metres

Metres

Metres

Metres

Metres

Metres

Metres

Metres

Metres

Metres

Metres

5

50

5

35

5

30

5

100

15

15

5

40

5

140

5

55

5

5

30

60

5

65





6907-11-16-43-MH-SOR-3070-0


21SHEET OF



0ENGINEERING Piping

NEW DELHI 27





FLANGE ASSEMBLIES


















309

310

311

312

313

314

315

316

317

318

319

320

321

322

323

324

325

326

327

328

329

330

MA0769012038

MA0769012039

MA0769012043

MA0769012110

MA0769020000

MA0769020505

MA0769020520

MA0769020522

MA0769020529

MA0769020616

MA0769020618

MA0769020619

MA0769020621

MA0769020811

MA0769020817

MA0769020821

MA0769020823

MA0769020925

MA0769021127

MA0769021322

MA0769021329

MA0769021524

Metres

Metres

Metres

Metres

NOs

NOs

NOs

NOs

NOs

NOs

NOs

NOs

NOs

NOs

NOs

NOs

NOs

NOs

NOs

NOs

NOs

30

30

95

10

4

3

2

1

2

1

2

3

1

1

2

1

2

1

1

1

3





6907-11-16-43-MH-SOR-3070-0


22SHEET OF



0ENGINEERING Piping

NEW DELHI 27























331

332

333

334

335

336

337

338

339

340

341

342

343

344

345

346

347

348

349

350

351

352

MA0769021532

MA0769021610

MA0769021630

MA0769021634

MA0769021828

MA0769021938

MA0769022029

MA0769022039

MA0769022043

MA0769030000

MA0769030520

MA0769030521

MA0769030525

MA0769030526

MA0769030527

MA0769030529

MA0769030634

MA0769030828

MA0769030927

MA0769030934

MA0769031122

MA0769031125

NOs

NOs

NOs

NOs

NOs

NOs

NOs

NOs

NOs

NOs

NOs

NOs

NOs

NOs

NOs

NOs

NOs

NOs

NOs

NOs

NOs

1

1

5

2

1

3

5

2

3

1

5

5

1

4

2

1

1

1

1

1

1





6907-11-16-43-MH-SOR-3070-0


23SHEET OF



0ENGINEERING Piping

NEW DELHI 27










VALVE ASSEMBLIES













353

354

355

356

357

358

359

360

361

362

363

364

365

366

367

368

369

370

371

372

373

374

MA0769031126

MA0769031127

MA0769031129

MA0769031326

MA0769031329

MA0769031629

MA0769032029

MA0769032039

MA0769032043

MA0769040000

MA0769040505

MA0769040520

MA0769040521

MA0769040522

MA0769040525

MA0769040526

MA0769040527

MA0769040529

MA0769040543

MA0769040618

MA0769040621

MA0769040625

NOs

NOs

NOs

NOs

NOs

NOs

NOs

NOs

NOs

NOs

NOs

NOs

NOs

NOs

NOs

NOs

NOs

NOs

NOs

NOs

NOs

1

1

2

5

2

2

5

2

3

4

8

5

4

9

4

9

7

2

1

4

1





6907-11-16-43-MH-SOR-3070-0


24SHEET OF



0ENGINEERING Piping

NEW DELHI 27






















COLD INSULATION (UNITS): (INSULATION MATERIAL

375

376

377

378

379

380

381

382

383

384

385

386

387

388

389

390

391

392

393

394

395

396

MA0769040634

MA0769040811

MA0769040817

MA0769040821

MA0769040823

MA0769040824

MA0769040828

MA0769040918

MA0769040920

MA0769040922

MA0769040925

MA0769040927

MA0769040932

MA0769040934

MA0769040943

MA0769041106

MA0769041120

MA0769041122

MA0769041127

MA0769041322

MA0769041329

MA9900000000

NOs

NOs

NOs

NOs

NOs

NOs

NOs

NOs

NOs

NOs

NOs

NOs

NOs

NOs

NOs

NOs

NOs

NOs

NOs

NOs

NOs

1

2

2

4

4

1

2

3

2

2

16

5

1

5

5

1

2

3

6

3

6





6907-11-16-43-MH-SOR-3070-0


25SHEET OF



0ENGINEERING Piping

NEW DELHI 27

SUPPLIED BY OWNER)Providing thermal insulation excluding supply of insulationmaterial which shall be supplied by owner but includingsupply of all ancillary materials, aluminium foil for SSsurfaces, vapour barrier, weather protective coverings,consumables and other necessary materials , testing ofmaterials as required , including transportation ofmaterials to work site, duly inspected by 3rd partyinspector Lyods/BV/DNV or any other Client approvedparty) at manufacturer's shop & sample check/inspection at site by EIL Constructioninspector, applying insulation on surfaces as specifiedincluding all preparatory works there on, binding, tying,lacing, stitching and/or otherwise securing , finishing withcladding as per spec., providing bolts, rivets, and selftapping screws wherever specified ,providing inspectionwindows, end seals for flanges etc., colour coding andidentification. Providing steel scaffolding, all tools , tackles, equipments etc. , labour, supervision and completing thework in all respect, at all heights as per drawings ,specifications and instructions of Engineer-in-charge.(Applicable EIL specification is 6-44-0003, for ColdInsulation and its addendum.)

INSULATION TYPE : IC; SURFACE MATERIAL : CS &AS; OPERATING TEMP. RANGE : UPTO -45 (DEG C);INSULATION MATERIAL : POLYURETHANEFOAM(PUF)

PIPES




397

398

399

400

401

MA9902000000

MA9902010000

MA9902010105

MA9902010205

MA9902010305

Metres

Metres

Metres

5

5

35





6907-11-16-43-MH-SOR-3070-0


26SHEET OF



0ENGINEERING Piping

NEW DELHI 27










INSULATION TYPE : IC; SURFACE MATERIAL : SS;OPERATING TEMP. RANGE : BELOW -45 (DEG C);INSULATION MATERIAL : POLYURETHANEFOAM(PUF)

PIPES







SUPPLY & WRAPPING WITH POLYURETHANE FOAM(PUF) AFTER CLEANING THE IMPULSE LINES OFDUST, RUST, GREASE .THE WRAPPING OF THEROPE AROUND IMPULSE LINE SHALL OVER ITCOMPLETELY WITHOUT LEAVING ANY GAP. FOR

402

403

404

405

406

407

408

409

410

411

412

413

414

415

416

417

418

419

MA9902010405

MA9902010505

MA9902010605

MA9902010705

MA9902010805

MA9902010905

MA9902011005

MA9902011105

MA9902011205

MA9903000000

MA9903010000

MA9903010105

MA9903010205

MA9903010305

MA9903010405

MA9903010505

MA9903010605

MA9904000000

Metres

Metres

Metres

Metres

Metres

Metres

Metres

Metres

Metres

Metres

Metres

Metres

Metres

Metres

Metres

125

5

190

115

25

95

30

50

10

10

5

35

5

20

20





6907-11-16-43-MH-SOR-3070-0


27SHEET OF



0ENGINEERING Piping

NEW DELHI 27

OTHER DETAILS REFER '6-44-0003 FOR COLDNSULATION'.

INSULATION MATERIAL : POLYURETHANE FOAM(PUF)

SIZE:- 0.5 INCH

Removal of insulation from existing lines including allancillary materials, vapour barrier, weather protectivecoverings etc. providing scaffolding for all heights, labour,material, toolsand tackles, consumables supervision etc.to complete the work in all respects as per drawings anddirection of Engineer-in-Charge for insulated piping asspecified including all pipes, fittings, flanges, valves etc.

INSULATION TYPE : IC; SURFACE MATERIAL : CS &AS; OPERATING TEMP. RANGE : BELOW -45 (DEG C);INSULATION MATERIAL : POLYURETHANEFOAM(PUF)

PIPES







FLANGE ASSEMBLIES


420

421

422

423

424

425

426

427

428

429

430

431

432

MA9904010000

MA9904010101

MA9905000000

MA9905100000

MA9905110000

MA9905110101

MA9905110201

MA9905110301

MA9905110401

MA9905110501

MA9905110601

MA9905120000

MA9905120101

Metres

Metres

Metres

Metres

Metres

Metres

Metres

NOs

205

15

40

5

25

30

5

1

The drawing, design and details given in this format are the property of ENGINEERS INDIA LIMITED. They are merely loaned on the borrower's express agreement that they will not be reproduced, copied, exhibited or used, except in thelimited way permitted by a written consent given by the lender to the borrower for the intended use. EIL 1641-1915, Revision 1.A4 297 x 210.

ENGINEERS INDIA LTD


Bidder'sStamp Div.:



TenderName



SED AND TRAY(MDept.:STATIC EQUIPME 1SHEET OF

06907-11-80-41-MH-SOR-3070-0


0 PVSS KJH

NEW DELHI


12





6907-11-80-41-MH-SOR-3070-0


2SHEET OF



0STATIC EQUIPME SED AND TRAY(M

NEW DELHI 12

STATIC EQUIPMENT

HOT INSULATION Providing thermal insulationincluding supply of all insulating and anciliary material, weather protective covering, consumables and othernecessary materials, testing of the material asrequired including transportation of the materials towork sites, applying insulation on surfaces asspecified, including all preparatory works thereon, allbinding, tying, lacing, stitching and/or otherwisesecuring, providing vapour barrier, finishing withplain/corrugated sheet cladding or as specified,providing bolts, rivets, self tapping screws whereverspecified, providing inspection windows etc., providingnecessary scaffolding, all tools and tackles,equipment, apparatus etc., labour and supervision and completing the work in all respect at all heights asper drawings, specifications and instructions ofEngineer-in-Charge. (Applicable Specification 6-44-0002).

Shells of vertical vessels, columns, exchangers, reactors,silencers etc. Surface material: CS/AS. Insulation type :IH &IT (Rockwool).



1

2

3

4

5

VV

V252.00.00

V252.01.00V02

V252.01.00V05

V252.01.00V16

M2

M2

M2

10.5

1.9

2

( INSULATION THICKNESS - 30 mm )







6907-11-80-41-MH-SOR-3070-0


3SHEET OF




NEW DELHI 12

Shells of vertical vessels, columns, exchangers,reactors, silencers etc. Surface material : SS.Insulation type : IH &IT (Rockwool).

Shell of vertical vessels, columns, exchangers, reactors,silencers etc. Surface material: SS. Insulation type: IS;

COLD INSULATION Providing cold insulation includingsupply of all insulating and anciliary material, protectivecovering, consumables and other necessary materials,testing of the material as required includingtransportation of the materials to work sites, applyinginsulation on surfaces as specified, including allpreparatory works thereon, all binding, tying, lacing,stitching and/or otherwise securing, providing vapourbarrier, finishing with plain/corrugated sheet claddingor as specified, providing bolts, rivets, self tappingscrews wherever specified, providing inspectionwindows etc. providing necessary scaffolding, all tools and tackles, equipment, apparatus etc. labour andsupervision and completing the work in all respect atall heights as per drawings, specifications andinstructions of Engineer-in-Charge. (ApplicableSpecification 6-44-0003).

Shells of vertical vessels, columns, exchangers, reactors,silencers etc. Surface material: SS. Insulation type: Ic(Polyurethane foam). Service: Other than LNG.

Shells of vertical vessels, columns, exchangers, reactors,

6

7

8

9

10

11

V252.03.00V06

V252.07.00

V252.07.01V01

V262.00.00

V262.07.00V26

V262.07.00V27

M2

M2

M2

M2

11

72

18.5

57








6907-11-80-41-MH-SOR-3070-0


4SHEET OF




NEW DELHI 12

silencers etc. Surface material: SS. Insulation type: Ic(Polyurethane foam). Service: Other than LNG.

Shells of vertical vessels, columns, exchangers, reactors,silencers etc. Surface material: SS. Insulation type: Ic(Polyurethane foam). Service: Other than LNG.

Shells and heads of horizontal vessels, columns,reactors, exchangers, silencers etc and heads of abovementioned vertical equipments. Surface material SS.Insulation type: Ic (Polyurethane foam). Service: Otherthan LNG.



Miscellaneous

12

13

14

15

16

V262.07.00V37

V262.08.00V06

V262.08.00V27

V262.08.00V32

V999.00.00

M2

M2

M2

M2

48

2

10

1






cc-001, vv-007





6907-11-80-41-MH-SOR-3070-0


5SHEET OF




NEW DELHI 12

Miscellaneous

HOT INSULATION Providing thermal insulation includingsupply of all insulating and anciliary material, weatherprotective covering, consumables and other necessarymaterials, testing of the material as required includingtransportation of the materials to work sites, applyinginsulation on surfaces as specified, including allpreparatory works thereon, all binding, tying, lacing,stitching and/or otherwise securing, providing vapourbarrier, finishing with plain/corrugated sheet cladding oras specified, providing bolts, rivets, self tapping screwswherever specified, providing inspection windows etc.,providing necessary scaffolding, all tools and tackles,equipment, apparatus etc., labour and supervision andcompleting the work in all respect at all heights as perdrawings, specifications and instructions of Engineer-in-Charge. (Applicable Specification 6-44-0002).Shells of vertical exchanger etc. Surface material: CS/AS.Insulation type : IH (PUF).( INSULATION THICKNESS - 125 mm)

COLD INSULATION Providing cold insulation includingsupply of all insulating and anciliary material, protectivecovering, consumables and other necessary materials,testing of the material as required includingtransportationof the materials to work sites, applyinginsulation onsurfaces as specified, including all preparatory worksthereon, all binding, tying, lacing, stitching and/orotherwise securing, providing vapour barrier, finishingwith plain/corrugated sheet cladding or as specified,providing bolts, rivets, self tapping screws whereverspecified, providing inspection windows etc. providingnecessary scaffolding, all tools and tackles, equipment,apparatus etc. labour and supervision and completing thework in all respect at all heights as per drawings,

17

18

19

V999.99.00

V999.99.99V04

V999.99.99V05

SQM

SQM

7.2

28





6907-11-80-41-MH-SOR-3070-0


6SHEET OF




NEW DELHI 12

specifications and instructions of Engineer-in-Charge.(Applicable Specification 6-44-0003).Shells and heads of horizontal vessel, columns, heatexchangers and heads of above mentioned verticalequipments Surfacematerial: SS. Insulation type: Ic (Polyurethane foam).Service: Other than LNG( INSULATION THICKNESS - 215 mm )

Insulation material is free issue material, i.e. supplied tocontractor free of cost. Contractor's scope includessupply of ancillary material, weather protective covering,consumables and other necessary materials, testing ofthe material as required including transportation of thematerials to work sites, applying insulation on surfaces asspecified, including all preparatory works thereon, allbinding, tying, lacing, stitching and/or otherwise securing,providing vapour barrier, finishing with plain/corrugatedsheet cladding or as specified, providing bolts, rivets, self-tapping screws wherever specified, providing inspectionwindows etc., providing necessary scaffolding, all toolsand tackles, equipment, apparatus etc., labour andsupervision and completing the work in all respect at allheights as per drawings, specifications and instructions ofEngineer-in-Charge (Applicable Specification 6-44-0002)for:Shells of vertical vessels, columns, exchangers, reactors,silencers etc. Surface material: CS/AS. Insulation type :IH &IT (Rockwool). INSULATION THK 25 mm.

Insulation material is free issue material, i.e. supplied tocontractor free of cost. Contractor's scope includessupply of ancillary material, weather protective covering,consumables and other necessary materials, testing ofthe material as required including transportation of thematerials to work sites, applying insulation on surfaces asspecified, including all preparatory works thereon, all

20

21

V999.99.99V06

V999.99.99V07

SQM

SQM

66

3





6907-11-80-41-MH-SOR-3070-0


7SHEET OF




NEW DELHI 12

binding, tying, lacing, stitching and/or otherwise securing,providing vapour barrier, finishing with plain/corrugatedsheet cladding or as specified, providing bolts, rivets, self-tapping screws wherever specified, providing inspectionwindows etc., providing necessary scaffolding, all toolsand tackles, equipment, apparatus etc., labour andsupervision and completing the work in all respect at allheights as per drawings, specifications and instructions ofEngineer-in-Charge (Applicable Specification 6-44-0002)for:Shells of vertical vessels, columns, exchangers, reactors,silencers etc. Surface material: CS/AS. Insulation type :IH &IT (Rockwool). INSULATION THK 45 mm.

Insulation material is free issue material, i.e. supplied tocontractor free of cost. Contractor's scope includessupply of ancillary material, weather protective covering,consumables and other necessary materials, testing ofthe material as required including transportation of thematerials to work sites, applying insulation on surfaces asspecified, including all preparatory works thereon, allbinding, tying, lacing, stitching and/or otherwise securing,providing vapour barrier, finishing with plain/corrugatedsheet cladding or as specified, providing bolts, rivets, self-tapping screws wherever specified, providing inspectionwindows etc., providing necessary scaffolding, all toolsand tackles, equipment, apparatus etc., labour andsupervision and completing the work in all respect at allheights as per drawings, specifications and instructions ofEngineer-in-Charge (Applicable Specification 6-44-0002)for:Shells & heads of horizontal vessels, columns,exchangers, reactors, silencers etc.heads of abovementioned vertical equipments, Surface material: CS/AS.Insulation type : IH &IT (Rockwool). INSULATION THK 25mm.

22 V999.99.99V08 SQM 116





6907-11-80-41-MH-SOR-3070-0


8SHEET OF




NEW DELHI 12

Insulation material is free issue material, i.e. supplied tocontractor free of cost. Contractor's scope includessupply of ancillary material, weather protective covering,consumables and other necessary materials, testing ofthe material as required including transportation of thematerials to work sites, applying insulation on surfaces asspecified, including all preparatory works thereon, allbinding, tying, lacing, stitching and/or otherwise securing,providing vapour barrier, finishing with plain/corrugatedsheet cladding or as specified, providing bolts, rivets, self-tapping screws wherever specified, providing inspectionwindows etc., providing necessary scaffolding, all toolsand tackles, equipment, apparatus etc., labour andsupervision and completing the work in all respect at allheights as per drawings, specifications and instructions ofEngineer-in-Charge (Applicable Specification 6-44-0002)for:Shells & heads of horizontal vessels, columns,exchangers, reactors, silencers etc.heads of abovementioned vertical equipments, Surface material: CS/AS.Insulation type : IH &IT (Rockwool). INSULATION THK 30mm.

Insulation material is free issue material, i.e. supplied tocontractor free of cost. Contractor's scope includessupply of ancillary material, weather protective covering,consumables and other necessary materials, testing ofthe material as required including transportation of thematerials to work sites, applying insulation on surfaces asspecified, including all preparatory works thereon, allbinding, tying, lacing, stitching and/or otherwise securing,providing vapour barrier, finishing with plain/corrugatedsheet cladding or as specified, providing bolts, rivets, self-tapping screws wherever specified, providing inspectionwindows etc., providing necessary scaffolding, all toolsand tackles, equipment, apparatus etc., labour andsupervision and completing the work in all respect at all

23

24

V999.99.99V09

V999.99.99V10

SQM

SQM

7

74





6907-11-80-41-MH-SOR-3070-0


9SHEET OF




NEW DELHI 12

heights as per drawings, specifications and instructions ofEngineer-in-Charge (Applicable Specification 6-44-0002)for:Shells of vertical vessels, columns, exchangers, reactors,silencers etc. Surface material: CS/AS. Insulation type :IS (Rockwool). INSULATION THK 25 mm.

Insulation material is free issue material, i.e. supplied tocontractor free of cost. Contractor's scope includessupply of ancillary material, weather protective covering,consumables and other necessary materials, testing ofthe material as required including transportation of thematerials to work sites, applying insulation on surfaces asspecified, including all preparatory works thereon, allbinding, tying, lacing, stitching and/or otherwise securing,providing vapour barrier, finishing with plain/corrugatedsheet cladding or as specified, providing bolts, rivets, self-tapping screws wherever specified, providing inspectionwindows etc., providing necessary scaffolding, all toolsand tackles, equipment, apparatus etc., labour andsupervision and completing the work in all respect at allheights as per drawings, specifications and instructions ofEngineer-in-Charge. (Applicable Specification 6-44-0002)Shells & heads of horizontal vessels, columns,exchangers, reactors, silencers etc.heads of abovementioned vertical equipments, Surface material: SS.Insulation type : Ic (Polyurethene foam). INSULATIONTHK 180 mm.

Insulation material is free issue material, i.e. supplied tocontractor free of cost. Contractor's scope includessupply of ancillary material, weather protective covering,consumables and other necessary materials, testing ofthe material as required including transportation of thematerials to work sites, applying insulation on surfaces asspecified, including all preparatory works thereon, allbinding, tying, lacing, stitching and/or otherwise securing,

25

26

V999.99.99V12

V999.99.99V13

SQM

SQM

8

2.5





6907-11-80-41-MH-SOR-3070-0


10SHEET OF




NEW DELHI 12

providing vapour barrier, finishing with plain/corrugatedsheet cladding or as specified, providing bolts, rivets, self-tapping screws wherever specified, providing inspectionwindows etc., providing necessary scaffolding, all toolsand tackles, equipment, apparatus etc., labour andsupervision and completing the work in all respect at allheights as per drawings, specifications and instructions ofEngineer-in-Charge. (Applicable Specification 6-44-0002)

Shells of vertical exchanger etc. Surface material: CS/AS.Insulation type : IH (PUF).( INSULATION THICKNESS - 90 mm)

Insulation material is free issue material, i.e. supplied tocontractor free of cost. Contractor's scope includessupply of ancillary material, weather protective covering,consumables and other necessary materials, testing ofthe material as required including transportation of thematerials to work sites, applying insulation on surfaces asspecified, including all preparatory works thereon, allbinding, tying, lacing, stitching and/or otherwise securing,providing vapour barrier, finishing with plain/corrugatedsheet cladding or as specified, providing bolts, rivets, self-tapping screws wherever specified, providing inspectionwindows etc., providing necessary scaffolding, all toolsand tackles, equipment, apparatus etc., labour andsupervision and completing the work in all respect at allheights as per drawings, specifications and instructions ofEngineer-in-Charge. (Applicable Specification 6-44-0002)Shells of vertical vessels, columns, exchangers, reactors,silencers etc. Surface material : SS. Insulation type IH &IT (Rockwool). Insulation thk- 50 mm

Contractor's scope is providing thermal insulation ,including supply of insulation and ancillary material,weather protective covering, consumables and othernecessary materials, testing of the material as required

27

28

V999.99.99V14

V999.99.99V15

SQM

SQM

129

140





6907-11-80-41-MH-SOR-3070-0


11SHEET OF




NEW DELHI 12

including transportation of the materials to work sites,applying insulation on surfaces as specified, including allpreparatory works thereon, all binding, tying, lacing,stitching and/or otherwise securing, providing vapourbarrier, finishing with plain/corrugated sheet cladding oras specified, providing bolts, rivets, self-tapping screwswherever specified, providing inspection windows etc.,providing necessary scaffolding, all tools and tackles,equipment, apparatus etc., labour and supervision andcompleting the work in all respect at all heights as perdrawings, specifications and instructions of Engineer-in-Charge. (Applicable Specification 6-44-0002) Shells of vertical vessels, columns, exchangers, reactors,silencers etc. Surface material: CS/AS/SS. Insulationtype : IH &IT (Rockwool). - INSULATION THICKNESS300 mm ,

Removal of insulation of existing equipment

Insulation material is free issue material, i.e. supplied tocontractor free of cost. Contractor's scope includessupply of ancillary material, weather protective covering,consumables and other necessary materials, testing ofthe material as required including transportation of thematerials to work sites, applying insulation on surfaces asspecified, including all preparatory works thereon, allbinding, tying, lacing, stitching and/or otherwise securing,providing vapour barrier, finishing with plain/corrugatedsheet cladding or as specified, providing bolts, rivets, self-tapping screws wherever specified, providing inspectionwindows etc., providing necessary scaffolding, all toolsand tackles, equipment, apparatus etc., labour andsupervision and completing the work in all respect at allheights as per drawings, specifications and instructions ofEngineer-in-Charge. (Applicable Specification 6-44-0002).Vertical shells. Surface material: SS, Insulation Type: Ic

29

30

V999.99.99V16

V999.99.99V17

SQM

SQM

370

27





6907-11-80-41-MH-SOR-3070-0


12SHEET OF




NEW DELHI 12

(Polyurethane foam). Insulation thickness-215mm

ENGINEERS INDIA LTD


Bidder'sStamp Div.:



TenderName



MACHINERY EQUIDept.:MACHINERY EQU 1SHEET OF

06907-11-82-41-MH-SOR-3070-0


0 Issued for Tender NK NK

NEW DELHI


3

AP10.10.2015

Balance Insulation Works at Lakwa





6907-11-82-41-MH-SOR-3070-0


2SHEET OF



0MACHINERY EQU MACHINERY EQU

NEW DELHI 3

Rotating Equipment�

Miscellaneous

Miscellaneous

Installation & application of Cold Insulation to thefollowing including supply of all insulating and anciliarymaterial, protective covering, consumables and othernecessary materials, testing of the material asrequired including transportation of the materials towork sites, applying insulation on surfaces as specified,including all preparatory works thereon, all binding,tying, lacing, stitching and/or otherwise securing,providing vapour barrier, finishing with plain/corrugatedsheet cladding or as specified, providing bolts, rivets,selftapping screws wherever specified, providinginspection windows etc. providing necessaryscaffolding, all tools and tackles, equipment,apparatus etc. labour and supervision and completingthe work in all respects at all heights as perdrawings, specifications and instructions of Engineer-in-charge(applicable specification 6-44-0003).

Supply, Installation & Application of cold insulation to thefollowing including supply of all insulating and anciliarymaterial, protective covering, consumables and othernecessary materials, testing of the material asrequired including transportation of the materials towork sites, applying insulation on surfaces as specified,including all preparatory works thereon, all binding,tying, lacing, stitching and/or otherwise securing,

1

2

3

4

5

R000.00.00

R999.00.00

R999.99.00

R999.99.99V07

R999.99.99V08

SQM

SQM

6

2.2

For the Suction Barrel/Can of 11-PA-008 A/B, 11-PA-010A/B & 11-PA-011 A/B. Surface material SS-304L,Insulation type IC (PUF:Polyurethane foam), Insulationthickness 200 mm in each case, as per the instructions ofEngineer-In-Charge





6907-11-82-41-MH-SOR-3070-0


3SHEET OF



0MACHINERY EQU MACHINERY EQU

NEW DELHI 3

providing vapour barrier, finishing with plain/corrugatedsheet cladding or as specified, providing bolts, rivets,selftapping screws wherever specified, providinginspection windows etc. providing necessaryscaffolding, all tools and tackles, equipment,apparatus etc. labour and supervision and completingthe work in all respects at all heights as perdrawings, specifications and instructions of Engineer-in-charge(applicable specification 6-44-0003).For the Suction Barrel/Can of 11-PA-008 A/B, 11-PA-010A/B & 11-PA-011 A/B. Surface material SS-304L,Insulation type IC (PUF:Polyurethane foam), Insulationthickness 200 mm in each case, as per the instructions ofEngineer-In-Charge

PART OF PRICED SOR

Total (Rs) (In Figure)

Total (Rs) (In Words)

Note:

1) Above prices are inclusive of all taxes & duties and exclusive of service tax.

Excise Duty and service tax is payable on submission of proper cenvatable

invoice.

2) Bids would be evaluated on overall lowest cost bid basis. Accordingly, all SOR

items need to be quoted otherwise bid will be liable for rejection.

(SIGNATURE & SEAL OF BIDDER)

PART OF PRICED SOR

FORM SP-3

DETAILS OF CENVATABLE SERVICE TAX

NOTE:

1. Amount of Cenvatable Service Tax shall not be included by the Contractor in their quoted price. OWNER will reimburse the Cenvatable service tax to the CONTRACTOR against production of original Cenvatable documents as required subject to amount of taxable value of services at Column (c) above . In case any variation in quantities of SOR then this amount shall vary proportionately.

2. Effective rate of Service Tax under column no (d) shall be indicated by Contractor after considering the applicable rules and follow the provisions of the Service tax including Government of India latest Notifications & subsequent amendments, if any

3. Bidder shall furnish this Form duly filled in all respects along with Price part.

4. Contractor shall indicate total Cenvatable service tax amount payable under the contract in this format . However, if the services fall under the list of services defined in reverse charge mechanism, then the liability of deposition of service tax to the tax authority by the Contractor and the Owner shall be dealt in accordance with Notifications issued by Government of India from time to time

(SIGNATURE & SEAL OF BIDDER)

S.No. Description AMOUNT OF TAXABLE

VALUE OF SERVICES (Base value)

Effective rate of tax

(%)

Amount of Cenvatable Service Tax

(a) (b) (c) (d) (e=cxd)

1 CENVATABLE SERVICE TAX

PART OF PRICED SOR

FORM SP-4A

DETAILS OF EXCISE DUTY INCLUDED IN QUOTED PRICES FOR INDIGENOUS SUPPLIES

NOTE:

1. Above Cenvatable Excise duty amount shall be deducted from the Total

Prices for the purpose of evaluation

2. Cenvatable Excise Duty Component mentioned in this FORM shall be considered as mandatory discount and shall be adjusted from all R.A. Bills on prorata basis. The Cenvatable Excise Duty shall be reimbursed to the Contractor upon submission of original Cenvatable documents as required to enable Owner to claim Cenvat benefit subject to the ceiling mentioned in this FORM.

3. Bidder shall furnish this FORM duly filled in all respects along with his Price Part.

______________________________ (SIGNATURE & SEAL OF BIDDER)

S.No. DESCRIPTION Amount on which Excise Duty is

applicable (In Rupees)

Amount of Cenvatable Excise Duty Included (In

Rupees) (a) (b) (c)

(d)

1 EXCISE DUTY

PART OF PRICED SOR

FORM SP-4B

DETAILS OF CVD AND SAD INCLUDED IN QUOTED PRICES FOR INDIGENOUS SUPPLIES

NOTE:

1. Cenvatable CVD and SAD amount mentioned above shall be furnished only with

respect to Imported supplies.

2. Above Cenvatable CVD and SAD amount as mentioned above shall be deducted from

the Total Prices for the purpose of evaluation. 3. Cenvatable CVD and SAD amount as mentioned above shall be considered as

mandatory discount since the same has been taken into consideration for evaluation and shall be deducted from all running account bills ( of supplies) on prorate basis. The amount of Cenvatable CVD and SAD amount shall be reimbursed to the Contractor on production of all relevant documents in accordance with provision of bidding document subject to ceiling mentioned above.

4. Bidder shall consider Marine Insurance @1% to arrive at the CIF value and thereby calculate Cenevatble CVD and SAD amount.

S.No. DESCRIPTION AMOUNT IN INDIAN RUPEES (IN INR)

IN FIGURES IN WORDS

(a) (b) (c)

(d)

1 Total Cenvatable CVD

2 Total Cenvatable SAD

Documents

(BIDDER NEED TO QUOTE PRICE’ IN PRICED SOR) · ENGINEERS INDIA LTD Date Bidder's ... ENGINEERING Dept.:Piping SHEET 1 OF ... line supports as per EIL pipe support standard having