7 – BIBLIOGRAFIA

Audisio G. e Bertini F., Journal of Analytical and Applied Pyrolisis, vol. 24, pp. 61 (1962);

Beuche, F., Physical Properties of Polymers, Interscience, New York (1962);

Billmeyer, F.W., Jr., Textbook of Polymer Science, 3a edição., John Wiley & Sons, Inc., New

York (1984);

Bockhorn H., Hornung A. e Hornung U., The Twenty-seventh International Symposium on

Combustion, University of Colorado, Boulder (1998);

Bockhorn H., Hornung A., Hornung U. e Jakobströer P., Journal of Analytical and Applied

Pyrolysis, vol. 49, pp. 53 (1999);

Bockhorn H., Hornung A. e Hornung U., Journal of Analytical and Applied Pyrolysis, vol. 50,

pp. 77 (1999);

Bouster C., Vermande P., e Veron J., Journal of Analytical and Applied Pyrolisis, vol. 1, pp.

297 (1980);

Bouster C., Vermande P. e Veron J., Journal of Analytical and Applied Pyrolisis, vol. 15, pp.

249 (1989);

Brandup, J., Immergut, E. H., Polymer Handbook, 2a edição, Wiley-Interscience, New York

(1966);

Brollo, M.J. e Silva, M.M., Política e Gestão Ambiental em Resíduos Sólidos: Revisão e

Análise Sobre a Atual Situação no Brasil, 21 Congresso Brasileiro de Engenharia Sanitária e

Ambiental. Retirado do site http://www.resol.com.br em 17 de outubro de 2001;

Carothers, W.H., J. Am. Chem. Soc., Vol. 51, pp. 2548-2559 (1929);

Carothers, W.H., Chem. Rev., Vol. 8, pp. 353-426 (1931);

Carothers, W.H., Trans. Faraday Soc., Vol. 32, pp. 39-53 (1936);

Chiantore O., Camino G., Costa L. e Grassie N., Polymer Degrad. Stab., vol. 3, pp. 209 (1981);

Duchin, F. and Lange, G.M., Prospects for the Recycling of Plastics in the United States.

Structural Change and Economic Dynamics, vol. 9, pp. 307-331 (1998);

Elias, H. G., An Introduction to Plastics, VCH, Weinheim, New York (1993);

Favarelli T., Bozzano G., Scassa C., Perego M., Fabini S., Ranzi E. e Dente M., Journal of

Analytical and Applied Pyrolysis, vol. 52, pp.87 (1999);

Favarelli T., Pinciroli M., Pisano F., Bozzano G., Dente M. e Ranzi E., Journal of Analytical

and Applied Pyrolysis, vol. 60, pp. 103 (2001);

150

Fishbein, B.K. Germany, Garbage and the Green Dot: Challenging the Throwaway Society.

Inform, New York (1994);

Flory, P. J., Principles of Polymer Chemistry, Cornell University Press, Ithaca, N.Y. (1953);

Fogler, H. S., Elements of Chemical Reaction Engineering, 2a edição, Prentice Hall

International, Inc. (1992);

Glynn PAR, Van der Hoff BME, Reilly PM., Geral model for pr of molecular weight

distribution of degraded polymers, Journal of Macromole Science Chemical, vol. A8, pp. 429-449

(1974);

Grassie N. e Scott G., Polymer Degradation and Stabilisation, New York: Cambridge University

Press (1985);

Jellinek H. H. G., Journal Polymer Science, vol. 4, (1949), pp. 14;

Kaminsky, W., Possibilities and Limits of Pyrolisys, Basel Huthig and Wepf (1992);

Kaminsky, W., Thermal Recycling of Polimers, Journal of analytical and applied Pyrolysis,

vol. 8, pp. 439-448 (1985);

Karaduman A., Simsek E., Çiçek B. e Bilgesü A. Y., Journal of Analytical and Applied

Pyrolisis, vol. 62, pp. 273 (2002);

Kiran, N., Ekinci, E. and Snape, C.E. Recycling of Plastic Waste via Pyrolisys. Resources

Conservation & Recycling, vol. 29, pp. 273-283 (2000);

Kricheldorf, H. R., Handbook of Polymer Synthesis, Marcel Dekker, New York (1992);

Luyben W. L., Process Modeling, Simulation and Control for Chemical Engineerings, 2a

edição, Mc Graw-Hill (1990);

Madorsky S. L., Thermal Degradation of Organic Polimers. Interscience, New York (1964);

Madras G., Smith J. M. e McCoy B. J., Polymer Degradation and Stability, vol. 58, pp. 131

(1997);

Madras G., Kumar S. e Chattopadhyay S., Polymer Degradation and Stability, vol. 69, pp. 73

(2000);

Mano, Eloísa Biasotto, Introdução aos Polímeros, Editora Edgard Blücher Ltda., São Paulo

(1985);

Mano, Eloísa Biasotto, Polímeros Como Materiais de Engenharia, Editora Edgard Blücher

Ltda., São Paulo (1991);

Mark, H. F., Bikales, N. M., Ovenberger, C. G., Menges, C., Styrene Polymers, Enciclopedia of

Polymer Science and Engineering, 16 (1989);

Mayers, J., PET Bottle Growth is out Pacing Resins Supply, Modern Plastics, December, pp.

40-45 (1994);

McGreavy, C., Polymer Reactor Engineering, 1st edition, VCH Publishers, New York (1994);

151

Odian, G., Principles of Polymerization, 3ª edição., John Wiley & Sons, Inc., New York

(1991);

Paris, I.A., The Landfill: It’s Place in Waste Treatment, International Directory of Solid Waste

Manegement 1994/1995, The ISWA Yearbook, pp. 120-123 (1995);

Partington, J. R., Historia de la química, Espasa-Calpe, S.A., Madrid (1945);

Ranzi E., Dente M., Favarelli T., Bozzano G., Fabini S., Nava R., Cozzani V. e Tognotti L.,

Journal of Analytical and Applied Pyrolysis, vol. 40-41, pp. 305 (1997);

Rice, R. D., Do, D. D., Applied Mathematics and Modeling for Chemical Engineerings, John

Wiley & Sons, Inc. (1995);

Rosen, S. L., Fundamental Principles of Polymer Materials, 2a edição, John Wiley & Sons,

Inc. (1993);

Sato S., Murakata T., Baba S., Saito Y. e Watanabe S., Journal Appl. Polymer Science, 40, pp.

2065 (1990);

Seymour, R. B., Carraher, C.E., Jr., Polymer Chemistry: An Introduction, 3ª edição, Marcel

Dekker, Inc., New York (1992);

Schork, F. J., Deshpande, P. B., Leffew, K. W., Control of Polymerization Reactors, Marcel

Dekker, Inc. (1993);

Sterling W. J., Walline K. S. e McCoy B. J., Polymer Degradation and Stability, vol. 73, pp. 75-

82 (2001);

Stevens, M. P., Polymer Chemistry, 2ª edição, Oxford University Press, Inc., Oxford (1990);

Subramanian, P.M., Plastic Recycling and Waste Manegement in the US, Resources,

Conservation and Recycling, vol. 28, pp. 253-263 (2000);

Ukei H., Hirose T., Horikawa S., Takai Y., Taka M., Azuma N. e Ueno A. Catalysis Today, vol.

62, pp. 67-75 (2000);

Ulrich, H, Introduction to Industrial Polymers, Hanser Publishers (1982);

Wallman, P.N., Thorsness, C.B. and Winter J.D., Hydrogen Production from Wastes¸ Energy

vol. 23, n°4, pp. 271-278 (1998);

Young, R. J., Introduction to Polymers, Chapman and Hall Ltd., London (1981);

Zhang Zhibo, Suehiro Nishio et al., Thermal and Chemical Recycle of Waste Polymers,

Catalysis Today, vol. 29, pp. 303-308 (1996);

Zhu X. Polymer Degradation and Stability, vol. 57, pp. 163 (1997).

152