Upload
sudhir5441
View
2
Download
0
Embed Size (px)
DESCRIPTION
DMX
Citation preview
07.2014_EN © 2014 BHS-Sonthofen GmbH – All Rights reserved.BHS-Sonthofen GmbH, An der Eisenschmelze 47, 87527 Sonthofen, GermanyPhone + 49 8321 6099-0, Fax + 49 8321 6099-220, [email protected], www.bhs-sonthofen.com
Dry Powder Batch Mixer (DMX)Technical data
Performance data (standard designs)
Dimensions and weights (standard designs)
TypeNominal volume
Maximum permissible fill volume 1)
Maximum permissible fill mass 1)
Throughput rate 2) Drive 3) Maximum aggregate size
Binder Dry mortarBinder up to
density 1Dry mortar Fine seal Coarse seal
DMX 1200 1,200 l 1,050 l 1,650 kg 40 cycles/h 42 m³/h 40 cycles/h 66 t/h 1 x 15 kW 1 x 22 kW 1 mm 16 mm
DMX 1700 1,700 l 1,500 l 2,200 kg 40 cycles/h 68 m³/h 40 cycles/h 88 t/h 1 x 22 kW 1 x 37 kW 1 mm 16 mm
DMX 2600 2,600 l 2,300 l 3,300 kg 38 cycles/h 99 m³/h 38 cycles/h 125 t/h 1 x 30 kW 1 x 55 kW 1 mm 16 mm
DMX 3600 3,600 l 3,200 l 4,600 kg 38 cycles/h 137 m³/h 38 cycles/h 175 t/h 1 x 37 kW 1 x 75 kW 1 mm 16 mm
DMX 4900 4,900 l 4,400 l 6,200 kg 38 cycles/h 186 m³/h 38 cycles/h 236 t/h 1 x 55 kW 2 x 55 kW 1 mm 16 mm
DMX 6500 6,500 l 5,900 l 8,300 kg 36 cycles/h 234 m³/h 36 cycles/h 299 t/h 2 x 37 kW 2 x 75 kW 1 mm 16 mm
Type A B C D E F G Weight
DMX 1200 2,600 mm 4) 1,500 mm 1,180 mm 1,940 mm 2,060 mm 1,500 mm 1,130 mm 5,000 kg
DMX 1700 2,930 mm 1,240 mm 900 mm 2,330 mm 2,430 mm 1,850 mm 1,400 mm 6,000 kg
DMX 2600 3,800 mm 1,770 mm 1,170 mm 2,350 mm 2,470 mm 1,950 mm 1,420 mm 7,400 kg
DMX 3600 3,650 mm 1,750 mm 1,130 mm 2,880 mm 2,980 mm 1,990 mm 1,580 mm 8,800 kg
DMX 4900 4,150 mm 2,260 mm 1,500 mm 2,880 mm 3,000 mm 2,020 mm 1,580 mm 12,500 kg
DMX 6500 4,270 mm 2,260 mm 1,500 mm 3,220 mm 3,340 mm 2,200 mm 1,850 mm 14,500 kg
1) Actual batch volume and mass depend on the density of the materials being mixed2) For mixing time of 60 seconds3) Alternative drive power available on request for other applications4) Without hydraulic aggregate (is placed separately)Drive power of agitator 5.5 kW per unit (max. 6 units depending on machine size)
Performance data for other materials available on request. All specifications apply to the standard version. Technical data for customized designs may differ from the specified data. All technical data may change due to development. Subject to modification without notice.
A
D
E
F
G
B
C