Upload
ahmad-adel-el-tantawy
View
217
Download
0
Embed Size (px)
Citation preview
7/28/2019 bf_am1_en
1/2
Inquiry, quotation and order formfor actuator controls AUMA MATIC
AM 01.1AM 02.1
Issue 1.06
Y000.212/002/en
Actuator controls AUMA MATIC AM 01.1 / 02.1 for controlling AUMA multi-turn actuators AUMA NORM SA(R) 07.1 SA(R) 16.1 and part-turnactuators AUMA NORM SG 05.1 SG 12.1 and SG 03.3 SG 05.3.Reference documents: Product description and technical data Actuator controls AUMA MATIC
Inquiry Project
Quotation Code
Order Shipping by:
Order date : Forw. agent
Delivery date : Sea freight Air freightQuantity: AM 01.1 AM 02.1
Ordering code Prices in E
Basic price AM 01.1
AM 02.1
Supply voltage / motor voltage
other than standard
Motor controls
Reversing contactors for motor power up to 1.5 kW( AM 01.1) Reversing contactors for motor power up to 7.5 kW( AM 02.1)
Reversing contactors for motor power up to 1.5 kW,each contactor 1 NC and 1 NO contact
50.08
Reversing contactors for motor power up to 7.5 kW,each contactor 1 NC and 1 NO contact
50.17
Reversing contactors for motor power up to 1.5 kW,each contactor 1 NO contact
50.21
Reversing contactors for motor power up to 7.5 kW,each contactor 1 NO contact
50.22
Thyristor unit instead of reversing contactors for supply voltage up to 500 V, recommendedfor a high number of starts
for motor power up to 1.5 kW with internal fuses 50.01
Control
Control inputs OPEN STOP CLOSE, 24 V DC 46.00 Control inputs OPEN STOP CLOSE, 220 V AC 46.13
Self-retaining REMOTE included not included
Voltage output 24V DC, max. 50 mA for supply of the control inputs 49._ _
115V AC, max. 30 mA for supply of the control inputs (not in combination withPTC tripping device)
49._ _
PositionerPositioner with 0/4 20mA input for nominal position value 41.10
0 20 mA 4 20 mA 20 0 mA 20 4 mA
Galvanic isolator for position feedback 0/4 20 mArecommended if feedback signal is to be further used in the system
45._ _
Position transmitter in actuator Potentiometer (0 5V)
RWG (0/4 20mA) 0 20 mA 4 20 mA 20 0 mA 20 4 mA
Fieldbus interfaces Profibus DP according to DIN 19 245, EN 50170 P1+3 41.38
Modbus RTU 41.44
Type of seating end pos. CLOSED Type of seating end pos. OPEN Limit seating Torque seating Limit seating Torque seating
Local controlsSelf-retaining Local included not included
Selector switch 2nd level (for positioner, ordering code 41.10, included in price adder) 51.02
Protection cover, lockable 37
Total carried forward to page 2
Page 1 of 2
3-phase AC voltages/frequencies
400/50 220/50 230/50 240/50 380/50
415/50 440/60 460/60 480/60 500/50
1-phase AC voltages/frequencies
110/60 115/60 120/60 220/50 230/50 240/50
Note: The respective standard version is printed in bold + italics
7/28/2019 bf_am1_en
2/2
AM 01.1AM 02.1
Issue 1.06Y000.212/002/en
Inquiry, quotation and order formfor actuator controls AUMA MATIC
Page 2 of 2
Ordering code Prices in E
Motor protection Motor temperature monitoring (thermoswitches in actuator)
Additional thermal overload relay 54._ _
PTC tripping device in connection with PTC thermistors in the actuator 54.29
Enclosure protection IP 67 IP67
IP 68 IP68
Terminal compartment additionally sealed against interior (double sealed), possible incombination with IP 67 (IP 67-DS) or IP 68 (IP 68-DS)
DS
Cable glands for enclosure protection IP 67 or IP 68. Please state cablediameters
on request
Corrosion protection KN incl. painting in standard colour KN
KS incl. painting in standard colour(recommended for installation in aggressive atmosphere, with a moderate pollutant concentration)
KS
KX incl. painting in standard colour(recommended for installation in extremelyaggressive atmosphere, with a high pollutant concentration)
KX
Colour other than standard colour (for available colours please contact AUMA)
Colour
Special primer / special finish coat
Accessories Wall bracket for mounting of AUMA MATIC separate from actuator, including plug/
socket connector, (connecting cables on request).39.1
Electrical connectionPlug cover with M-threads
1 x M20 x 1.5 / 2 x M25 x 1.5 S-31 included in basic price
1 x M20 x 1.5 / 2 x M25 x 1.5 / 1 x M32 x 1.5 SH-148
1 x M20 x 1.5 / 1 x M25 x 1.5 / 1 x M32 x 1.5 SE-105
1 x M20 x 1.5 / 2 x M25 x 1.5 Profibus DP S-G-PBD-31 without price adder
1 x M20 x 1.5 / 2 x M25 x 1.5 Modbus RTU S-G-MOD-31 without price adder
Plug cover with Pg-threads
1 x Pg 13.5 / 2 x Pg 21 S-21 without price adder
1 x Pg 13.5 / 2 x Pg 21 / 1 x Pg 29 SH-26
1 x Pg 13.5 / 1 x Pg 21 / 1 x Pg 29 SE-03
1 x Pg 13.5 / 2 x Pg 21 Profibus DP S-G-PBD-21 without price adder 1 x Pg 13.5 / 2 x Pg 21 Modbus RTU S-G-MOD-21 without price adder
Plug cover with NPT-threads
1 x " NPT / 2 x " NPT S-74
2 x " NPT / 1 x 1" NPT SH-80 without price adder
2 x " NPT / 1 x 1" NPT SE-80
1 x " NPT / 2 x " NPT Profibus DP S-G-PBD-74 without price adder
1 x " NPT / 2 x " NPT Modbus RTU S-G-MOD-74 without price adder
Plug cover with G-threads
2 x G " / 1 x G 1" / 1 x G 1" SH-178
2 x G " / 1 x G 1" SH-179
Special threads
Control plug gold plated (sockets and pins)recommended in connection with gold contacts in switches
S-G-xx
Parking frame for plug, when removed from actuator 95
Protection cover for plug compartment (when plug is removed) 96.1
Wiring diagramMSP
KMS TP
Total carriedforward from page 1
Price total / unit
x quantity
Price total
Note: The respective standard version is printed in bold + italics