Best Practices for Searching the Adam Imaging Parts Website:

www.adamimaging.com or www.adamimagingparts.com

Searching for parts begins right on the home page

Parts can be searched by either of the following (but not in combination):

Part Number or Part Description or System Name or Manufacturer

Searching by Part Number

Result:

Note: This particular part comes from many different

GE Advantx systems. In this case, searching by generic system name (Advantx) or

manufacturer (GE) may have yielded far too many results

What are some other ways we could have searched for

this part?

Alternate searching methods for 46-232230 G1-C (a)

Search the term, ‘rotator’ or ‘tv rot’

Alternate searching methods for 46-232230 G1-C (b)

Another effective search technique is

to use the main part of the part number, in this case, ‘232230’

This is especially effective when searching a part that may have potentially many revisions, i.e. G1-C, G1-D,

etc.

For example, when searching Philips numbers, it may prove beneficial to drop

off the last digit which oftentimes reflects only the

revision of the part

What if you happened to search for ‘46-232230G1C’? The formatting is obviously different from what you see above?

Alternate searching methods for 46-232230 G1-C (c)

In the case where you would be unsure of the part number formatting, it is recommended you to remove all ‘spaces’, ‘dashes’, ‘commas’, etc. i.e.

46232230g1c, which would yield the following result:

Note: 46232230, 4623223, 462322, 23223, etc. would have also yielded the same result.

Searching by System Name

In this case, we don’t know the exact part number so we will search using the system name. For example, Toshiba Infinex, or for this example, simply ‘Infinex’

Many matches were found using ‘Infinex’, therefore some scrolling to find your part will be necessary.

Note: The search return is limited to the top 50 results. If your search yields more than this, you may have to refine your search technique

The Adam Imaging Parts Database

The image above is a snapshot of a portion of the Adam Imaging Parts database. You will notice that some of the items do not have part numbers (green boxes) and some of the items do not

have an OEM part number (red box). These are instances where if you don’t find the part by part number, it might be best to try system name or get more information from the customer, i.e. model

number, or name of the part manufacturer (red box).

As always, if you’re having trouble finding what you need, we are only a phone call or instant message away and will be more than happy to help you find your parts!

Contact Methods:

Office Phone: 347 985-1679/1680Fax: 718 228-6559Josh:Cell – 631 523-1479E-mail – josh@adamimagingparts.com Yahoo! – joshadammedDanny:E-mail – danny@adamimagingparts.com Yahoo! - dannyadammed