BEST OF SELECTIONHIGH PERFORMANCE PRODUCTS

QUICK-SEARCH YG-1 PRODUCTS!!www.yg1.kr

YG1YEBS190822003Search ‘YG-1’ on social media outlets

HEAD OFFICE 211, Sewolcheon-ro, Bupyeong-gu, Incheon, South KoreaPhone : +82-32-526-0909E-mail : yg1@yg1.krwww.yg1.kr

Note The new address above has currently been updated to the new Korean postal standard valid since 2014. Notice that the physical Head Office location did NOT change.

2 www.yg1.kr 3www.yg1.kr

FOR HIGH-HARDENED STEELS (HRc50-70)

• Made from premium grade carbide material for oil mist / high-speed machining

• YG-1’s customized coating, along with negative rake angles• Excellent finished surface

FEATURES & BENEFITS• Square Ø 0.1mm - Ø 25mm (.004 - 1")• Corner Radius Ø 0.5mm - Ø 20mm (1/16 - 1") • Ball Nose Ø 0.1mm - Ø 25mm (1/32 - 1/4")

RANGE

BLUE- Coated Solid Carbide End Mills for High-Hardened Steels

Nano Grain Carbide

Negative Rake Angle

Corner Geometries

Blue Coating

Miniature 2 FluteCorner Radius

4 FluteCorner Radius

2&4 FluteBall Nose

4 FluteHigh Feed

6&8 Flute45 ̊Helix

HIGH-SPEED MACHINING FOR EXOTIC MATERIALS

Y-Coated Solid Carbide End Mills for Titanium and other Exotic Materials

• For Titanium, Stainless Steels and also excellent for Steels• For high-speed machining and heavy cutting• Dual stepped-core on 4 flute, 5 flute with multiple helix

FEATURES & BENEFITS• Square Ø 6mm - Ø 25mm (1/8 - 1")• Corner Radius Ø 6mm - Ø 25mm (1/8 - 1")• Roughing Ø 6mm - Ø 25mm (1/4 - 1")

RANGE

TitaNox Power for exotic materials, holds a 4 flute double core, 5 flute multiple helix, and rougher. It shows excellent performances on Titanium, Stainless Steels and also on Steels. With a 2-stepped core and multiple helix, along with YG-1’s special coating, its latest technology makes it possible for heavy profiling and high-speed machining.

▶ 2 STEP CORE4 Flute Double Core End Mills With Corner Radius

Large Chip Pocket• Excellent Chip Evacuation.• Minimizes Chips from Clogging• Good Performance for Slotting Applications

Thick Core• Higher Rigidity• Better Stability Preventing Tool bending• Good Performance for Shouldering Applications

Y-Coated /4 FLUTE

Y-Coated /5 FLUTE

TiAlN-Coated /Roughing

THE FIRST CHOICE FOR PRE-HARDENED STEELS (-HRc55)

Y-Coated Solid Carbide End Mills for Die & Mold Industries

• Large product line with various sizes & shapes• Edge preparation preventing chipping, achieving excellent

finish, and longer tool life in high-speed cutting • Unequal index & multiple helix exclusively designed

to reduce vibration and also to achieve excellent chip evacuation

FEATURES & BENEFITS• Square Ø 0.1mm - Ø 25mm (.004 - 1")• Corner Radius Ø 0.2mm - Ø 20mm (.008 - 3/4") • Ball Nose Ø 0.1mm - Ø 25mm (.004 - 3/4”)

RANGE

Optimal Edge Preparation

Ultra Micro grain - Nano Grain Carbide

Unequal Index & Multiple Helix Available on4G Mills, 4 Flute Multiple Helix End Mills

A1 A2

A2A1≠A2

A1

Y-Coated Solid Carbide End Mills for Heavy Cutting

• High volume cutting with excellent surface finish (heavy cutting)• Excellent on Stainless Steels, Mild Steels and Cast Iron• Unique flute and corner design for chip formation and longer tool life• Optimized coating for wear reduction and heat resistance• Great performance with trochoidal machining

FEATURES & BENEFITS

Unequal Index

High PerformanceCorner Geometriesincluding Chamfer

Multiple Helix Design

Premium GradeCarbide Substrate

YG-1 Tailor-made Coating

• Square Ø 3mm - Ø 25mm (1/8 - 1")• Corner Radius Ø 3mm - Ø 25mm (1/8 - 1")• Ball Nose Ø 3mm - Ø 25mm (1/8 - 1")

RANGE

35˚ / 37˚ Helix

4 Flute

45˚ Helix

6 Flute 4 Flute Ball Nose

35˚ / 37˚ Helix

HEAVY CUTTING APPLICATIONS (-HRc40)

2 FluteBall Nose

2 FluteExtended neck

2 FluteCorner RadiusExtended neck

4 FluteCorner Radius Extended neck

2 FluteBall Nose

Extended neck

4 Flute Extended neck

▶ What's New!!You can find new items with Shank Diameter 6mm and less in these types as below;

Special Chip Splitter DesignShorter Chip Length at high axial machining, improving chip removal from both the component and the machine

Chip Splitters

6 Flute Chip Splitters

Launching Jan of 2020

MILLING TOOLS MILLING TOOLS

4 www.yg1.kr 5www.yg1.kr

TOOL SOLUTIONS FOR INDUSTRIES

EXCELLENT PRODUCTIVITY BY REDUCING TOOL SET-UP TIME

HIGH PRECISION CUTTING WITH COST EFFICIENCY

Modular Type, Y-Coated Exchangeable Carbide Heads for Pre-Hardened Steels with both Carbide & Steel Holders

• Reduces 1/10 of the time spent to change tools than conventional solid tools

• Outstanding cutting abilities and wear resistance made from advanced coating and geometry

• Multiple helix applied to minimize vibration when cutting

FEATURES & BENEFITS

• Square Ø 10mm - Ø 32mm (3/8 - 1-1/4")• Corner Radius Ø 10mm - Ø 32mm (3/8 - 1-1/4")• Ball Nose Ø 10mm - Ø 32mm (3/8 - 1-1/4")

RANGE

Coated Exchangeable Carbide Inserts with both Carbide & Steel Holders for Various Materials

-Xmill

• Re-generation(holder) service• For General Purpose, Pre-Hardened Steels, High-Hardened Steels,

Stainless Steels and Graphite• Ball Nose, Corner Radius, Full Radius and also high feed types available• Holders available in both Carbide & Steel• Long tool life with high wear resistance• Increased precision by tightening the tolerance and grinding the

internal Screw hole of holders and Inserts

FEATURES & BENEFITS• Ball Ø 8mm - Ø 33mm (5/16 - 1-1/4") • Corner Radius Ø 8mm - Ø 33mm (5/16 - 1-1/4")

RANGE

- SMART

COMPOSITE MATERIALS

Taper Neck ShankStraight Neck Shank

Tool set-up time per piece

Changing conventional Solid End Mills

Changing modular heads

About 10 minutes

About 1 minute

Steel Ball Holders

Carbide Corner Radius Holders

Steel Corner Radius Holders

Carbide Ball Holders

For High-Hardened Steels(XMB260T, XMR260T)

For General Purpose(XMB110A, XMR110A)

For Pre-Hardened Steels(XMB120C, XMR120C)

For Graphite / Diamond Coated(XMB110D, XMR110D)

Full Radius(XMM110V)

High Feed Insert(XMF110V)

For Stainless Steel (XMB130A, XMR110A)

HIGH PERFORMANCE END MILLS FOR ALUMINUMHIGH FEED, HIGH RPM and HIGH CHIP REMOVALDLC-Coated & Non - Coated Solid Carbide End Mills for Aluminum Alloy, Non-Ferrous & Non-Metallic Materials

• Designed for Aluminum Alloys used in Aerospace industries• Special geometries applied to control weight balance for quality

performance on higher RPM making an excellent surface finish through stable machining

• High corner protection made from special shape and rake angle inside the radius

• Excellent performance with high feed, high RPM, high chip removal(heavy cutting)

FEATURES & BENEFITS

ALU-POWER HPC

Engineered Flute Design Effective chip evacuation at high feed rates with lower cutting forces than competitive products

Ideal Symmetrical Shape• 3 Flute design “To the center” - all 3 flutes come to center

• Designed with high spindle speeds in mind

• Highly effective in plunging and helical ramping

Cylindrical Land• Increased performance over a variety of cutting conditions

• Helps in reduction of vibration and chatter

Long Reach Neck Tools Available • Variable lengths of necks for deep pockets and long reach processing

• Short flute length for higher rigidity

Tough Micro - Grain Carbide Material Provides edge strength and unsurpassed tool life

RANGE

TYPE(SERIES)SIZE RANGE

INCH METRIC3 Flute Square Ø 1/8~1 Ø 3~25mm3 Flute Square with Neck Ø 1/4~1 Ø 6~20mm3 Flute Corner Radius Ø 1/8~1(R.010~.250) Ø 6~20mm (R0.3~4mm)3 Flute Corner Radius with Neck Ø 1/4~1(R.010~.250) Ø 6~20mm (R0.3~4mm)

※ Available in Non-coated & DLC coated items

DLC COATED

Diamond Coated Compression Routers• The unique flute structure provides good surface finish, longer tool life and requires less cutting force• Reduces delamination and fibers pullout• Roughing and finishing processes• Diamond coating with excellent abrasion resistance

Diamond Coated Chip Breaker Routers

Solid Carbide Drills

• The unique flute structure provides good surface finish, longer tool life and requires less cutting force• Reduces delamination and uncut fibers• Roughing and finishing processes• Multiple flute • Diamond coating with excellent abrasion resistance• Fine nick type

A combination of perfect carbide choice with innovative design and adapted CVD coating make YG-1 CFRP drills a good choice for Composite drilling

Slotting Side Milling Plunging, Pocketing

End Teeth Type

No End CutType 1

Burr EndType 2

End Mill EndType 3

Drill EndType 4

COMPOSITEMATERIALS

TOOL SOLUTIONS FOR INDUSTRIES

Scan QR Code to See More Tools for COMPOSITE METERIALS

MILLING TOOLS MILLING TOOLS

6 www.yg1.kr 7www.yg1.kr

P Steel

Hard

Tough

YG1001 High hardness grade for Best Productivity

YG3010 First choice for Finishing Steels

YG3020 Balanced grade between Hardness and Toughness

YG3030 High toughness grade for Heavy Interrupted cut

M Stainless

Steel

Hard

Tough

YG211 High wear resistance grade for Stainless Steel

YG3030 CVD Grade for high speed cutting on STS

YG213 First choice of general stainless steel application

YG214 High toughness grade for Unstable Machining

K Cast Iron

ISO K10 YG1001 First choice for Grey Cast Iron

ISO K15 YG3010 First choice for Ductile Cast Iron

N Non-

ferrous Metals

DLC YG100 DLC Coated grade for High alloyed Aluminum

Uncoated YG10 Uncoated grade for General Aluminum application

Cast ironSpeed

Feed

YG1001

YG3010

Non-ferrous MetalsSpeed

Feed

YG10

YG100

SteelsSpeed

Vcm/min.

(inch/min.)

FeedFn

mm/rev.(inch/rev.)

220(720)

YG3010

YG1001

YG3020

YG801

YG3030

SpeedStainless steels

Feed

YG3030YG211

YG214

YG213

FinishingRoughing

-UF For Finishing

-UL Semi-Finishing and Sticky Materials

-UM Medium (for Unstable Condition)

-UG Medium (for Stable Condition)

-UC Medium Roughing

-UR Roughing and Heavy Interrupted Cut

FinishingRoughing

-MF Finishing

-MM Medium

-MR Roughing

Chipbreakers for Steel Chipbreakers for Stainless steelStable

Unstable

-UC Medium Roughing

-UR Roughing and Heavy Interrupted Cut

..MA Cast Iron Heavy Roughing (Flat type)

-KR Cast Iron heavy Roughing (Big K-land)

Chipbreakers for Cast iron

-AL From Roughing to Finishing

Chipbreakers for Non-ferrous Metals

Steels

UR

UC

6(.24)

4(.16)

2(.08)

Fnmm/rev.

(inch/rev.)0.2 0.4 0.6

Apmm

(inch)

UL

UF

UM

UG

(.008) (.016) (.024)

6(.24)

4(.16)

2(.08)

Fn

Ap Stainless steels

MF

MR

MM

(.008) (.016) (.024)0.2 0.4 0.6

Cast iron..MA

6(.24)

4(.16)

2(.08)

UR

UC

KR

(.008) (.016) (.024)Fn

Ap

0.2 0.4 0.6

Non Ferrous Metals

AL

6(.24)

4(.16)

2(.08)

(.008) (.016) (.024)Fn

Ap

0.2 0.4 0.6

ISO Turning – GradesOptimized ISO Turning Grades to Boost Up Your Productivity from Interrupted Cut to Continuous Cut

ISO Turning – ChipbreakersOptimized ISO Turning Chipbreakers to Boost Up Your Productivity from Roughing to Finishing

INDEXABLE TOOLSINDEXABLE TOOLS

8 www.yg1.kr 9www.yg1.kr

INDEXABLE TOOLSINDEXABLE TOOLS

GRADES

Optimal PVD Coating for Milling application

Micro grain size carbide • Multi-Purpose Grade with optimal thermal resistance & added strength• Sub-micron substrate designed for demanding application

YG602 P M K S

for Milling

Optimal PVD Coating for Milling application

Micro grain size carbide • High adhesive strength and toughness between the substrate and coating layer• Sub-micron substrate designed for demanding application

YG622 P K

for Milling

PRODUCT LINE

CHIPBREAKERS

–AL• For Aluminum• Very Sharp Geometry

–ST• For Stainless Steel, Super Alloy• Sharp Geometry

General Inserts(GN)

• First Choice for General Application

–TR• For Hardened Steel• Reinforced Geometry

...W / ...N • For Hardened Material and Cast Iron

SNMX8 Corner NegativeØ 50mm ~ Ø 100mm

ONMU16 Corner Negative

Ø 63mm ~ Ø 315mm

SDMT4 Corner

Square High FeedØ 32mm ~ Ø 100mm

APKT-TR, ST, AL2 Corner Positive

APKT 10 : Ø16mm ~ Ø 100mmAPKT 16 : Ø25mm ~ Ø 200mm

Chipbreakers

Grade

Optimal PVD Coating for Drilling application

Micro grain size carbide

Parting & Groove

Universal grade for General Drilling Application• Ultra Dense PVD Coating with optimal thermal resistance & strength

• Sub-Micron substrate designed for demanding application

YG602 P20 - P35 M20 - M40 K20 - K40 S15 - S25

TD. SeriesTDN TDP TDY

2, 3, 4

PRODUCT LINE

PRODUCT LINE

Popular 3 corner drill insertWCMX 04/05/06/08Diameter Ø 20mm ~ Ø 60mm

WCMX SeriesEconomic 4 corner drill insertSPMX 05/06/07/09/11/14Diameter Ø 13mm ~ Ø 50mm

SPMX Series

-PTDP

13°

• Parting & Grooving (Positive)

-NTDN

• Parting & Grooving (General)

-YTDY

• Groove Turn

YG-1 MillingVarious Insert Milling Series to Meet Your Tooling Needs from Shoulder Milling to High Feed Milling

Parting & Groove Turn Universal Easy-to-Choose Parting & Groove Turn Insert Grade for Various Application

YG-1 Drilling Universal Easy-to-Choose Drilling Insert Grade for Various Kinds of Material

YG-1 MillingVarious Insert Milling Series to Meet Your Tooling Needs from Shoulder Milling to High Feed Milling

10 www.yg1.kr 11www.yg1.kr

DREAM DRILLS - HIGH FEED

INCREASE YOUR PRODUCTIVITY UP TO 2 TIMES HIGHER

H- Coated 3 Flute Solid Carbide Drillswith Coolant Holes for Faster Drilling on Steels and Cast Iron

• Ø 5mm - Ø 20mm (.1969"-.7874")• Drill Depth: 3xD, 5xD

RANGE• For Carbon Steels, Alloy Steels (-HRc35), Cast Iron• Increases productivity due to 1.5 to 2 times faster feeding speed than

2 flute drills• Multi-layered coating delivers outstanding productivity and reliability

FEATURES & BENEFITS1200

1000

800

600

400

200

0

(Holes)

1000

800

600

400

200

0

(Holes)

600

500

400

300

200

100

0

300

250

200

150

100

50

0

(Holes) (Holes)

Pro

ductiv

ity

Pro

ductiv

ity 1,592 mm/min.

1.4 times UP

1,114 mm/min.

Ø 6.0 5xD

1200

1000

800

600

400

200

0

(Holes)

1000

800

600

400

200

0

(Holes)

600

500

400

300

200

100

0

300

250

200

150

100

50

0

(Holes) (Holes)

Pro

ductiv

ity

Pro

ductiv

ity

1.6 times UP

1,600 mm/min.1,003 mm/min.

Ø 10.0 5xD

PRODUCTIVITY (Carbon Steel)

Radius Thinning

3-Cutting Edges & Margins

FAST AND STABLE DRILLING FOR A WIDE VARIETY OF APPLICATIONS

X-Coated(2XD), TiAlN Coated(5XD), Micro Grain Flat Bottom Solid Carbide Drills (180˚point angle) for Drilling a Variety of Contoured and Sloped Surfaces

DREAM DRILLS - FLAT BOTTOM

• 180 degree point angle enables drilling of horizontal and sloped surfaces.

• Excellent chip evacuation by optimized flute shape.• High strength cutting edge to improve tool life.• Can be used in a variety of drilling applications.

FEATURES & BENEFITS• Ø 3mm - Ø 20mm (.1181"-.7874")• Drill Depth: 2XD, 5XD

RANGE

Inclined Entry Guide Drilling

Curved Surface

Inclined Exit Cross Drilling

Chained Hole

Counter Boring

Thin Plate Blind Hole for Threading

Internal Cooling Holes

High Strength Cutting Edge

180 Degree

180 Degree

Chamfer

2XD 5XD

High Strength Cutting Edge

Double MarginHole straightness and roundness provide good alignments

COST EFFICIENT HIGH PERFORMANCE EXCHANGEABLE DRILLING TOOLS

H- Coated Carbide Inserts and Premium Steel Holders

• For Carbon Steels, Alloy Steels and Cast Iron• Secure and quick clamping system• High performance with cost efficiency• Multi-layered coating delivers outstanding productivity and reliability

FEATURES & BENEFITS

• Ø 10mm - Ø 33.73mm (.3937"-1.3281")• Holder Length: 3xD, 5xD, 8xD

RANGE

Cylindrical shank with a parallel flataccording to ISO9766Plain shank and Whistle notch shankare available on request

Body Clearancefor elimination undesirable contact with work piece

Ground bright finished shankfor more precise clamping

Internal cooling channel for higher drilling performance

Optimized flute shapefor better chip evacuation

Torx Plus Screwfor clamping insert

Nickel-plated Steel holderfor corrosion resistance and wear resistance

Optimized Point Geometry of i-One Drills Ensures Centering Ability and Smoother Cutting

Multi-layered "H"-coated Micro Grain

Carbide Insert

- ONE DRILL

FOR DEEP HOLE DRILLING WITHOUT PECKING OPERATION

DREAM DRILLS - MQL

• Optimized Special Flutes are ideal for Outstanding Chip Removability and productive Drilling

• Upgraded TiAlN Nano Layer Full Coating• Compatible with the MQL(Minimum Quantity Lubrication) System• For Carbon Steels, Alloy Steels, Pre-Hardened Steels and Cast Iron

FEATURES & BENEFITS

RANGE

Higher Productivity than Conventional HSS Deep Hole Drills

Tolerance h6

DIN 6535 HAK

4-Facet point for good centering capability

Tolerance h7

Polished flute for enhanced chip

evacuation

* Drilling Depth 35xD(Ø3~Ø6), 40xD(Ø3~Ø6) are Special Series

10XD

15XD

20XD

10XD

15XD

20XD

25XD

30XD

[Ø3~Ø14]

[Ø3~Ø12]

[Ø3~Ø12]

[Ø3~Ø14]

[Ø3~Ø12]

[Ø3~Ø12]

[Ø3~Ø10]

[Ø3~Ø8]

End

Mill

Sha

nk

HOLEMAKING TOOLS HOLEMAKING TOOLS

12 www.yg1.kr 13www.yg1.kr

3 TIMES FASTER THAN NORMAL TAPS

▶ PRODUCTIVITY Up to 3 times Faster in tapping compared to conventional taps (General Steel)

Prod

ucti

vity

Cost

Prof

it

Synchro Tap

General Tap

30~45 m/min.

3 Times Faster

10~20 m/min.

Spira

l Flu

te

Spira

l Poi

nt

Stra

ight

Flu

te

Cold

For

min

g• Spiral Flute M3 - M20 (#4-3/4")• Spiral Point M3 - M20 (#4-3/4")• Straight Flute M3 - M20 (#4-3/4")• Cold Forming M3 - M12 (#4-1/2")

RANGE

• High productivity by high-speed machining• Shorten thread length and higher thread reliefs• Close tolerance concentricity eliminating oversized threads

FEATURES & BENEFITS

TiAlN, TiN-Coated HSS-PM Taps for High-Speed Tapping on Rigid CNC Machines

Prevents Chip Packing by Applying Short Thread Length and High Spiral Angle

Reduces Chattering by Tight Shank Tolerance

Compared to Normal Taps

GENERAL USE FOR VARIOUS MATERIALS

Bright, Steam Tempered, TiAlN, TiN-Coated HSS-E Taps for Multi-Purpose

Combo Tap’s geometry provides enough flute space resulting in smooth chip evacuation and therefore a continuous production process. Guarantee a high level of process reliability even under unfavorable conditions.

• For Steels, Stainless Steels, Cast Iron and Non- Ferrous Materials

• Prevents over & under feeding by its optimized flank geometry

• Constant threading quality preventing oversized threading

FEATURES & BENEFITS

• Spiral Flute M2 - M30 (#4-1")• Spiral Point M2 - M30 (#4-1")

RANGE

Spiral Flute Taps

PATENTED

Spiral Point Taps

HYDRAULIC CHUCK

TOOLING SYSTEM

Milling High Speed Cutting Fine Drilling

ReamingTapping &

Tread Milling Chamfering

Milling High-Speed Cutting Fine Drilling

Reaming Tapping & Thread Milling Chamfering

APPLICATION

Superb T.I.R. Accuracy & Repeatability≤ 0.003mm (Direct Clamping)

Basic G2.5 25,000 RPM Balanced

Excellent Vibration Damping • To increase tool life• For better roughness• For better accuracy

Vacuum Filling System for injection of 100% purehydraulic oil guaranteeing stable torque power

Various Size of Reduction SleeveØ 3mm - Ø 25mm

Superb T.I.R Accuracy≤ 0.003mm

Basic Balancing GradeMin. G2.5/25,000rpm

Strong Torque PowerMin. 18Nm ~ 550Nm

Standard and Slim Design• Standard 4.5° • Slim 4.0°• Extra Slim 3.0°

SHRINK FIT HOLDER

TOOL HOLDERSTHREADING TOOLS

MEMO

*

BRAZIL

CANADA

COLOMBIA

MEXICO

UNITED STATES

AMERICAS

EGYPT

SOUTH AFRICA

AFRICA

BELGIUM

CROATIA

CZECH REPUBLIC

DENMARK

FINLAND

FRANCE

GERMANY

HUNGARY

ITALY

LITHUANIA

NORWAY

POLAND

PORTUGAL

ROMANIA

RUSSIA

SERBIA

SLOVENIA

SPAIN

SWEDEN

SWISS

THE NETHERLANDS

TURKEY

UNITED KINGDOM

EUROPE ASIA PACIFICAUSTRALIA

CHINA

HONG KONG

INDIA

INDONESIA

IRAN

ISRAEL

JAPAN

MALAYSIA

PAKISTAN

PHILIPPINES

SINGAPORE

SOUTH KOREA

TAIWAN

THAILAND

UNITED ARAB EMIRATES

VIETNAM

C

M

Y

CM

MY

CY

CMY

K

��∏± º”¡� π◊ ≪�ø〈¡�ª� ¡§∫∏.pdf 1 2018. 3. 23. 오전 10:35

MEMO

*

BRAZIL

CANADA

COLOMBIA

MEXICO

UNITED STATES

AMERICAS

EGYPT

SOUTH AFRICA

AFRICA

BELGIUM

CROATIA

CZECH REPUBLIC

DENMARK

FINLAND

FRANCE

GERMANY

HUNGARY

ITALY

LITHUANIA

NORWAY

POLAND

PORTUGAL

ROMANIA

RUSSIA

SERBIA

SLOVENIA

SPAIN

SWEDEN

SWISS

THE NETHERLANDS

TURKEY

UNITED KINGDOM

EUROPE ASIA PACIFICAUSTRALIA

CHINA

HONG KONG

INDIA

INDONESIA

IRAN

ISRAEL

JAPAN

MALAYSIA

PAKISTAN

PHILIPPINES

SINGAPORE

SOUTH KOREA

TAIWAN

THAILAND

UNITED ARAB EMIRATES

VIETNAM

C

M

Y

CM

MY

CY

CMY

K

��∏± º”¡� π◊ ≪�ø〈¡�ª� ¡§∫∏.pdf 1 2018. 3. 23. 오전 10:35

* For the more information on sales network, please contact the head o�ce as below;

YG-1 HEAD OFFICE 211, Sewolcheon-ro, Bupyeong-gu, Incheon, South KoreaPhone : +82-32-526-0909 e-mail : yg1@yg1.kr www.yg1.kr

HIGH QUALITY PRODUCTS and forON TIME DELIVERY

Since 1982, YG-1 has been committed to quality, innovation and the unique customer experience. Our performance and experience have granted YG-1 the global impression of one of the leading manufacturers of high quality cutting tool solutions. This global footprint expands over 75 countries, with international logistic centers, pledging to our customers to give the best service available today - and tomorrow.

BELGIUM FINLAND ITALY THE NETHERLANDSPORTUGAL SLOVENIA

DENMARK HUNGARY POLAND SERBIA SWISS

CZECH REPUBLIC GERMANY NORWAY RUSSIA SWEDEN UNITED KINGDOM

CROATIA FRANCE LITHUANIA ROMANIA SPAIN TURKEY

EUROPE

HONG KONG TAIWANISRAEL PAKISTAN

INDIA THAILANDJAPAN PHILIPPINES

CHINA SOUTH KOREAIRAN MALAYSIA VIETNAM

AUSTRALIA SINGAPOREINDONESIA UNITED ARAB EMIRATES

ASIA PACIFIC

CANADA UNITED STATESBRAZIL MEXICOCOLOMBIA

AMERICAS

SOUTH AFRICAEGYPT

AFRICA

* For the more information on sales network, please contact the head o�ce as below;

YG-1 HEAD OFFICE 211, Sewolcheon-ro, Bupyeong-gu, Incheon, South KoreaPhone : +82-32-526-0909 e-mail : yg1@yg1.kr www.yg1.kr

HIGH QUALITY PRODUCTS and forON TIME DELIVERY

Since 1982, YG-1 has been committed to quality, innovation and the unique customer experience. Our performance and experience have granted YG-1 the global impression of one of the leading manufacturers of high quality cutting tool solutions. This global footprint expands over 75 countries, with international logistic centers, pledging to our customers to give the best service available today - and tomorrow.