4
ASSA ABLOY, the global leader in door opening solutions Frame Frame is the basic version of the automatic door system Besam Frame, which also comprises; Frame Telescopic, Frame Break-out and Frame Reverse Break-out. Its rugged design and clean, classic appearance makes Besam Frame suitable for use in entrances with high traffic and where shopping trol- leys must pass in and out. Besam Frame comprises doors, operator, safety units and, if required, side screens and overlights. The system can be supplied for beam- or wall- mounting and is available as bi-part- ing and single-sliding. All models are tailored to indi- vidual customer requirements. The aluminium profiles are available as clear or colour anodized, or painted according to RAL colour. Different glass types can be mounted; 6 and 8 mm laminated or toughened, or 22 and 40 mm double glazed units. For Frame and Frame Telescopic, ther- mally broken profiles are available. Frame Telescopic Frame Telescopic is the natural choice in narrow passage ways. It maximises the opening width and provides an impressive solution when space is limited. Frame Break-out Frame Break-out enables the doors and side screens to be swung out- wards in an emergency situation by applying pressure. This allows exit through the entire door and side screen space. Frame Reverse Break-out Frame Reverse Break-out enables the doors to be swung inwards in an emergency situation by applying pressure. This allows exit through the entire door space. Safety features Besam Frame together with a Besam presence detection sys- tem will further improve the safety. People or objects in the doorway are detected and the door is then prevented from closing until it is safe to do so. To meet the requirements of BS7036:1996 it may be necessary to incorporate additional safety units such as finger/head/body trap pro- tection, presence safety units and in some situations hinged pocket safety screens. We recommend that you call your Besam area sales contact to assist you in specifying these products. We can help you to ensure that each installation meets the require- ments and recommendations of BS7036:1996, BS8300, Building Regulations and the DDA. Besam Automatic Door System Frame

Besam Automatic Door System - ASSA ABLOY Entrance SD/1... · automatic door system Besam Frame, ... see UniSlide product sheet. Bi-parting ... 1900 3000 2800 3900 1900 3000 2800 3900

Embed Size (px)

Citation preview

Page 1: Besam Automatic Door System - ASSA ABLOY Entrance SD/1... · automatic door system Besam Frame, ... see UniSlide product sheet. Bi-parting ... 1900 3000 2800 3900 1900 3000 2800 3900

ASSA ABLOY, the global leader in door opening solutions

FrameFrame is the basic version of the automatic door system Besam Frame, which also comprises; Frame Telescopic, Frame Break-out and Frame Reverse Break-out. Its rugged design and clean, classic appearance makes Besam Frame suitable for use in entrances with high traffic and where shopping trol-leys must pass in and out. Besam Frame comprises doors, operator, safety units and, if required, side screens and overlights. The system can be supplied for beam- or wall-mounting and is available as bi-part-ing and single-sliding.

All models are tailored to indi-vidual customer requirements. The aluminium profiles are available as clear or colour anodized, or painted according to RAL colour. Different glass types can be mounted; 6 and 8 mm laminated or toughened, or 22

and 40 mm double glazed units. For Frame and Frame Telescopic, ther-mally broken profiles are available.

Frame TelescopicFrame Telescopic is the natural choice in narrow passage ways. It maximises the opening width and provides an impressive solution when space is limited.

Frame Break-outFrame Break-out enables the doors and side screens to be swung out-wards in an emergency situation by applying pressure. This allows exit through the entire door and side screen space.

Frame Reverse Break-outFrame Reverse Break-out enables the doors to be swung inwards in an emergency situation by applying pressure. This allows exit through the entire door space.

Safety featuresBesam Frame together with a Besam presence detection sys-tem will further improve the safety. People or objects in the doorway are detected and the door is then prevented from closing until it is safe to do so.

To meet the requirements of BS7036:1996 it may be necessary to incorporate additional safety units such as finger/head/body trap pro-tection, presence safety units and in some situations hinged pocket safety screens.

We recommend that you call your Besam area sales contact to assist you in specifying these products. We can help you to ensure that each installation meets the require-ments and recommendations of BS7036:1996, BS8300, Building Regulations and the DDA.

Besam Automatic Door System Frame

Page 2: Besam Automatic Door System - ASSA ABLOY Entrance SD/1... · automatic door system Besam Frame, ... see UniSlide product sheet. Bi-parting ... 1900 3000 2800 3900 1900 3000 2800 3900

� �

COW

FW/CL

FHO

H

543

2

1

� �

� �

3

4 5� �

SW COW

FW/CL

74

X

83

5-10

DW

685≤ 8

118

COH

156

OH

FH

DH

8100

5-10

1

2

Bi-parting with side screens and overlight, beam mounted

Bi-parting without side screens

Single sliding with side screen and overlight

(left opening shown)

Single sliding without side screen (left opening shown)

FW = Frame widthFH = Frame heightOH = Overlight heightCL = Cover lengthCOW = Clear opening width

COH = Clear opening heightDW = Door leaf widthDH = Door leaf heightSW = Side screen widthX = Safety distance

Single sliding

FHmin FHmax FWmin FWmax 1900 3000 900 1500 1900 3000 900 1500 1900 3000 900 1500 1900 3000 900 1500

Single sliding with side screen wall mountedFHmin FHmax FWmin FWmax1900 3000 2000 30001900 3000 2000 30001900 3000 2000 30001900 3000 2000 3000

Single sliding with side screen beam mountedFHmin FHmax FWmin FWmax2050 3150 2000 30002050 3150 2000 30002050 3150 2000 30002050 3150 2000 3000

Technical Data Besam Frame

For information about the operator, see UniSlide product sheet.

Bi-parting

FHmin FHmax FWmin FWmax1900 3000 900 30001900 3000 900 28501900 3000 900 20001900 3000 900 1550

Bi-parting with side screens wall mountedFHmin FHmax FWmin FWmax1900 3000 2000 60001900 3000 2000 60001900 3000 2000 43001900 3000 2000 3400

Bi-parting with side screens beam mountedFHmin FHmax FWmin FWmax2050 3150 2000 60002050 3150 2000 60002050 3150 2000 43002050 3150 2000 3400

Glass

mm 6 8 22 40

Glass

mm 6 8 22 40

The below measures are formally certified by third party laboratories. For special applications, other sizes can be delivered on request.

Page 3: Besam Automatic Door System - ASSA ABLOY Entrance SD/1... · automatic door system Besam Frame, ... see UniSlide product sheet. Bi-parting ... 1900 3000 2800 3900 1900 3000 2800 3900

188

FH/C

OH

5-1

0

DH

810

0

1

2

� � ��

� �� �

� �

� �

34

5

6�

6

SW COW

FW/CL5-10

DWDW

74

X

83

85

≤ 8

≤ 8

≤ 8

COW

FW/CLFH � ��

4 53

1

6

2

Technical Data Besam Frame Telescopic

Telescopic bi-parting with side screens, wall mounted

Telescopic bi-parting without side screens

Telescopic single sliding with side screen

(left opening shown)

Telescopic single sliding without side screen (left opening shown)

FW = Frame widthFH = Frame heightCL = Cover lengthCOW = Clear opening widthCOH = Clear opening height

DW = Door leaf widthDH = Door leaf heightSW = Side screen widthX = Safety distance

Single sliding 2 sling doorsFHmin FHmax FWmin FWmax1900 3000 1000 15501900 3000 1000 15501900 3000 1000 15501900 3000 1000 1550

Single sliding with side screen wall mountedFHmin FHmax FWmin FWmax1900 3000 1600 24501900 3000 1600 24501900 3000 1600 24501900 3000 1600 2450

Single sliding with side screen beam mountedFHmin FHmax FWmin FWmax2050 3150 1600 24502050 3150 1600 24502050 3150 1600 24502050 3150 1600 2450

Bi-parting 4 sling doorsFHmin FHmax FWmin FWmax1900 3000 1600 24001900 3000 1600 24001900 3000 1600 24001900 3000 1600 2400

Bi-parting with side screens wall mountedFHmin FHmax FWmin FWmax1900 3000 2800 39001900 3000 2800 39001900 3000 2800 39001900 3000 2800 3900

Bi-parting with side screens beam mountedFHmin FHmax FWmin FWmax2050 3150 2800 39002050 3150 2800 39002050 3150 2800 39002050 3150 2800 3900

For information about the operator, see UniSlide product sheet.

Glass

mm 6 8 22 40

Glass

mm 6 8 22 40

The below measures are formally certified by third party laboratories. For special applications, other sizes can be delivered on request.

Page 4: Besam Automatic Door System - ASSA ABLOY Entrance SD/1... · automatic door system Besam Frame, ... see UniSlide product sheet. Bi-parting ... 1900 3000 2800 3900 1900 3000 2800 3900

ASSA ABLOY is the global leader in door opening solutions, dedicated to satisfying end-user needs for security, safety and convenience.

COWCOP

FW/CL

� �

1

543

2

162

COH

161

FH

DH

12100

1

2

� �

SW COW

FW/CL5-10

DW

X

63

4 5

≤ 8 COW

14 FW

Besam Ltd. Washington House, Brooklands Close, Sunbury on Thames, Middlesex TW16 EQ Tel: +44 1932 765 888 Fax: +44 1932 765 864

[email protected] • www.besam.com 1003

784-

GB

-3.0

– Is

sue

2008

-06-

16 –

Rig

hts

rese

rved

for c

hang

es w

ithou

t prio

r not

ice.

© A

ll rig

hts

in a

nd to

this

mat

eria

l are

the

sole

pro

perty

of A

SS

A A

BLO

Y E

ntra

nce

Sys

tem

s A

B. C

opyi

ng, s

cann

ing,

alte

ratio

ns o

r mod

ifica

tions

are

exp

ress

ly fo

rbid

den

with

out t

he p

rior w

ritte

n co

nsen

t of t

he a

pplic

able

com

pany

with

in A

SS

A A

BLO

Y E

ntra

nce

Sys

tem

s A

B.

Bi-parting with side screens and break-out, beam mounted Single sliding with

side screen and break-out

(left opening shown)

Bi-parting without side screens with reverse

break-out

FW = Frame widthFH = Frame heightCL = Cover lengthCOW = Clear opening widthCOP = Clear opening,

break-outCOH = Clear opening heightDW = Door leaf widthDH = Door leaf heightSW = Side screen widthX = Safety distance

Technical Data Besam Frame Break-out Besam Frame Reverse Break-out

General Accessories and Options• Door system:

- anodized aluminium, colour on request - painted in colour according to RAL card

• Glass type: - 6 or 8 mm laminated - 6 or 8 mm toughened - 22 or 40 mm double glazed unit

• Glassfinish:green,bronze,opaque• Overlight (beam mounted only) • Side screens• Mechanical lock

Single sliding with side screen wall mountedFHmin FHmax FWmin FWmax2100 2400 2050 28002100 2400 2050 28002100 2400 2050 24202100 2400 2050 2130

Single sliding with side screen beam mountedFHmin FHmax FWmin FWmax2250 2550 2050 28002250 2550 2050 28002250 2550 2050 24002250 2550 2050 2100

Single sliding without side screen wall mountedFHmin FHmax FWmin FWmax2100 2400 930 12302100 2400 930 12302100 2400 930 10952100 2400 930 940

Bi-parting with side screen wall mountedFHmin FHmax FWmin FWmax2100 2400 2300 50002100 2400 2300 50002100 2400 2300 47302100 2400 2300 4160

Bi-parting with side screens beam mountedFHmin FHmax FWmin FWmax2250 2550 2300 50002250 2550 2300 50002250 2550 2300 46902250 2550 2300 4080

Bi-parting without side screens wall mountedFHmin FHmax FWmin FWmax2100 2400 930 24302100 2400 930 24302100 2400 930 21502100 2400 930 1850

Frame Break-out Frame Break-out Frame Reverse Break-outGlass

mm 6 8 22 40

Glass

mm 6 8 22 40

For information about the operator, see UniSlide product sheet.

The below measures are formally certified by third party laboratories. For special applications, other sizes can be delivered on request.