BERKER B.IQ. 08.2013 ZeBekrer B.IQ2 DESIGN & VERSIONS CONSTRUCTION & DIMENSIONS STRUCTURE OF THE DISPLAY PARAMETER TECHNICAL DATA

BERKER B.IQ

08.2013 Ze Bekrer B.IQ 2

DESIGN & VERSIONSCONSTRUCTION & DIMENSIONSSTRUCTURE OF THE DISPLAY PARAMETERTECHNICAL DATA


B.IQDESIGN

Frameless KNX pushbutton

4 different Materials Glass

■Polarwhite

■Black

Aluminium Plastic Stainless steel


B.IQVERISONS

The Berker B.IQ is available in different verions:

1gang

2gang

3gang

4gang

3gang with RTR

4gang with RTR

5gang with RTR


B.IQDESIGN & VERSIONS

Uniform installation height

B.IQ push button 1- 4 gang

B.IQ push button with RTR and display 3 - 5gang


B.IQDESIGN & VERSIONS

Uniform installation height

B.IQ push button 1gang

B.IQ push button 4gang

B.IQ push button with RTR and

display 3gang (also 4gang and 5gang)


B.IQ1- 4GANG STANDARD

Productname:

B.IQ Pushbutton, X-gang

Order No: 7516 x0 9x


B.IQ1- 4GANG STANDARD

with anti-dismantling protection

with blue operation LED and white status LEDs

for switch, push-button, dimmer and shutter functions

dimming / position value transmitter 1 byte

extension unit for light scene push-button


B.IQ1- 4GANG KOMFORT

Productname:

B.IQ Pushbutton, X-gang comfort



B.IQ1- 4GANG KOMFORT

Standard functions plus:value transmitter for dimming, position, brightness and temperature values 1 and 2 bytecyclic transmission can also be started via switching objectalarm telegram after disconnection from bus coupling unit 1 bit or 1 bytesingle and two push-button operation parameterisableone push-button operation for switching, pushing, shutters and dimmingactivation of second user level via object


B.IQ3- 5 GANG WITH RTR

Productname:

B.IQ Pushbutton, X-gang with thermostat and display




with anti-dismantling protection

With blue operation LED and white status LEDs

LC display with symbols and illumination, switchable via object

display of operating mode, controller lockout, room/outside temperature, time (clock required)

text display (ASCII-format)

with 2 additional display buttons

end customer display scope parameterisable



for switch, push-button, dimmer, shutter and room thermostat functions

value transmitter for dimming, position, brightness and temperature values 1 and 2 byte

extension unit for light scene push-button

single and two push-button operation parameterisable

one push-button operation for switching, pushing, shutters and dimming



area dimming

shutter operation concept short-long-short and long-short parameterisable

alarm telegram after disconnection from bus coupling unit 1 bit, 1 or 2 byte

with room temperature timer and 2-week timer functions

For individual single room temperature control

controller operating modes: comfort, standby, night and frost/heat protection mode



for heating and/or cooling mode with/without auxiliary step

control parameter for heating / cooling unit pre-set

temperature measurement via internal and/or external sensor with mean value formation

separate window contact object

indicator objects for heating and cooling

with valve protection function

object for controller status

with flash-controller technology




B.IQCONSTRUCTION & DIMENSIONS

Labelling field (optional)

Spacer plate for the display (only required if the labelling field is used)

Base plate with display

Transparent protective cover for the electronics (do not remove or paint over)

Design cover (only to be fitted once all installation work has been completed)



Base plate with display

Guide pins

Securing screws for base plate / bus coupling unit supporting ring.

User interface (PEI)



Status LEDs

Operating LED

Display / display buttons

Function buttons /

rocker switches

Labelling field






B.IQSTRUCTURE OF THE DISPLAY

Reserved for future developments

Lower values (left display button)

Accept a change into a sub-menu

“Comfort” operating mode

“Standby” operating mode

“Night” operating mode

Comfort extension (“Night” operating mode)

Frost / heat protection

Heating energy is supplied or control display in the programming

Cooling energy is supplied or control display in the programming

Change the menu item (right display button)

Raise the value (right display button)

Comfort extension (“Frost / heat protection” operating mode)

Switch off room cooling in the event of condensation on the cooling unit

A change made to the required value using the display buttons

Programming mode

Operation of the display buttons or individual rockers or operation of the device locked

Timer active or control display in respective programming



B.IQPARAMETER / ETS CONFIGUTATION

The standard and the comfort B.IQ‘s can be configured with Parameters directly in the ETS.

The B.IQ with Display and temperature control needs a plug-in which has to be installed. This is available with the Application on www.berker.com

The next sheets will show the parametration of a RTR B.IQ




Gerneral settings



Display



Push button function



Rocker / Push button function



Status LED



Addressing by drag & drop



Addressing



Room temperature regulation






Temperature measuring









B.IQTECHNICAL DATA

Supply Voltage (via bus line): 21–32 V DC

Power consumption (via bus line): typically 360 mW

Controls and displays Rockers (buttons) 3-5 (6-10)

Graphics display with 2 display buttons Two lines with symbol bar

Internal temperature sensor Measuring range 0° C to 40° C

Resolution 0.1 K

Air humidity 0% to 95% (non-condensing)

Internal clock Resolution 1 minute

Gang variation max. 8 minutes a day (use external clock!; update every hour over the bus)

Connections Flush-mounted bus coupling unit plus (7504 00 03)

User interface: 2 x 5-pin male connector

Index of protection IP 20

Ambient temperature range Mode -5 to +45°C

Storage / transportation -20 to +60 °C (storage at over +45°C will reduce the working life)

Assembly Plug into flush-mounted bus coupling unit

Mounting orientation any

Dimensions (W x H x D) depending on design see dimensional drawings

Thanks for your attention


Documents

BERKER B.IQ. 08.2013 ZeBekrer B.IQ2 DESIGN & VERSIONS CONSTRUCTION & DIMENSIONS STRUCTURE OF THE DISPLAY PARAMETER TECHNICAL DATA