BERETTA 2013 PROSHOP

BERETTA2013PROSHOP

FIREARMACCESSORIES

2

C a l l 1 . 8 0 0 . 9 2 9 . 2 9 0 1

Tactical Cases & Trollies A-C. Beretta Tactical Explorer Cases and TrolleyProtect your handguns and accessories from rain, humidity and sand. Made of resistant injection molded polypropylene, the Tactical Explorer Cases and Trolley are completely waterproof and watertight and will keep your valuable fi rearms safe even in tough outdoor conditions. Inside, layers of “pick and pluck” foam let you customize the bottom of the case to accommodate your handguns and accesso-ries in your preferred layout while keeping them fi rmly in place during travel. Choose between the model for one pistol (2712B), for two (4412B) or the Tactical Trolley (5112B), which features wheels and a retractable handle for convenient transport. TSA approved. Made in Italy.A. 2712B .....Single Pistol Case ...... 12˝x 10½˝ x 5¾˝ ........4 lbs......$79B. 4412B .....Double Pistol Case .... 18½˝ x 16½˝ x 6˝........8.5 lbs....$149C. 5122B .....Tactical Trolley ......... 21½˝ x 14˝ x 9¾˝........15.5 lbs. ....$209

D. Accessory Case for Tactical TrolleyDesigned to fi t snugly inside the Beretta Tactical Trolley, the Accessory Case is a removable soft briefcase that offers you customizable compartments with Velcro spacers. A veritable case within a case, it allows you to easily carry the most critical items to your shooting station without lugging around the whole trolley; also, you can set it up as a convenient shelving unit within the trolley. Rubber handle, detachable strap, no-noise zipper. Made in Italy. D. BAG-B ............................................ 20˝x 11˝x 5½˝ ............2.75 lbs. ...........$59

A.

B.

A.

C.

C.D.

D.

Accessory case can be used with or without the Tactical Trolley.

© 2013 Beretta USA Corp., Accokeek, Maryland. Prices are valid through March 31, 2013.

The same attention to detail and manufacturing excellence that Beretta puts into its legendary fi rearms is given to the

products that accessorize them. In the Beretta Pro Shop you can be confi dent that the add-on, replacement or upgraded part you are purchasing works perfectly with your Beretta fi rearm, whether the accessory is from our factory or from one of our trusted partners. In our Pro Shop you will fi nd a wide selection of parts for your shotgun, pistol and rifl e. We off er a variety of grips, magazines and holsters for Beretta pistols, accessories to custom-ize your U22 Neos, numerous tactical options for your CX4 Storm and much more. We are continuing to develop Pro Shop to complement our complete product line of fi rearms. Visit our website at www.berettausa.com to shop our full line of Pro Shop Gun Accessories.

Table of Contents

2 .... Tactical Cases

4 .... 92 Series Pistol

8 .... PX4 Seies Pistol

11 .. Nano Pistol

12 .. Small Frame Pistols

13 .. U22 Neos Plinker

14 .. CX4 Series Plinker

15 .. Burris Optics

16 .. Sako Rifle

17 .. Shotguns

w w w . b e r e t t a u s a . c o m

A. Tactical Explorer Trolly for Long GunsWhether it is for trips to the range or long-distance fl ights, the ultra-tough Tactical Explorer Trolley for Rifl e will keep your valuable rifl e and accessories safe and dry. Designed to accommodate one scoped rifl e and accessories, the trolley is completely waterproof and watertight, offering you the same resistance against rain, humidity and sand as all the cases in our Tactical Explorer line. Inside, layers of “pick and pluck” foam allow you to customize the bottom of the trolley to accommodate your rifl e and accessories in your preferred layout while keeping them fi rmly in place during travel. The trolley is TSA approved and has wheels for easy carry. Made in Italy.A. 9413B .............. 39˝x 16½˝ x 6¼˝ ............... 17 lbs. .............. $259

A.

A.

B. Range BagsGrab them by their padded handles or carry them over your shoulder. The bottom of the bag features Beretta’s gun-protecting thermoshield padding. Easy-opening top access with plenty of inner pockets and zippered exterior pockets. Larger bag holds six cartridge boxes; smaller bag holds four. Heavy-duty nylon. Color: 0999)black. Imported.BS120189 .....131⁄2" x 8" x 10" large......$65 BS690189.....11" x 6" x 8" small.....$54

yhe bag features Beretta’s dding. enty

"

3

D. 92 Series Wood Grips with MedallionsElegantly checkered genuine walnut grips with inset medallion. Fit models 96, 92FS, 92A1, M9, M9A1, Brigadier, Centurion, Elite. Made in Italy. See chart below for details.

A. 92 Series Aluminum Checkered GripsDesigned for maximum purchase with an aggressive checkering pattern. Laser-engraved Trident logo and deep, durable black fi nish. Made in USA. See chart below for details.

C. 92 Series Wood Grips Genuine walnut grips with elegant oval checkering and the Trident logo. Fit FS models (excluding Stock, Combat, Billen-nium, Compact and Compact Type M). Made in Italy. See chart below for details.

92 SERIES GRIPS (Grip screws sold separately.)

B. 92 Series Rubber Grips Set of sleek, textured non-slip rubber grips fi t F & FS models (excluding Stock, Combat, Bil-lennium, Compact and Com-pact Type M). Made in USA. See chart below for details.

Our pistols expert explains which mags fi t which 90 Series fi rearms. Scan this QR code with your smartphone to watch the video, or visit berettausa.com.

92 SERIES MAGAZINES

4

C a l l 1 . 8 0 0 . 9 2 9 . 2 9 0 1

A. B.

C. D.

E.

A.-D. 92 SERIES GRIPS ITEM NUMBER PRICE

A. Aluminum Checkered Grips JGALU92BLK $79

B. Rubber Grips UD6A0211 $29

C. Wood Grips E00219 $53

D. Wood Grips with Medallions JG92FSW $50

Over Mold Grips JG92LG302 $299

Over Mold Grips Military Stand. LG-402M $359

92 Series Grip Screws EU00017 $9

Allen/Hex Grip Screws Kit EU00015 $9

E. 92 SERIES MAGAZINES ITEM NUMBER PRICE

92FS and CX4 Factory Magazine 9 mm 20 rds 1385979/1 $57

92FS Factory Magazine 9 mm 30 rds C89282 $40

M9A-92FS Magazine 9mm/15 Sand Resistant JM9A115 $55

92FS Factory Magazine 9mm 17 rds JM909P17 $35

92FS Factory Magazine .40 S&W 12 rds JM904P12 $35

92FS Factory Magazine 9mm 15 rds JM92HCB $43

Factory 96 Magazine .40 S&W 11 rds JM80399HC $43

Beretta Factory 96 Magazine .40S&W 10 Rds JM96 $40

Beretta Factory 92FS Magazine 9mm 10 Rds JM92F $40

Beretta 92FS Magazine, 9mm, Stainless Steel Look, 10RD C80405 $24

Beretta 92FS Magazine, 9mm, Stainless Steel Look, 15RD C85993 $25

A.

See all our magazines: berettausa.com/mags

92 SERIES PARTS

Customer Review:“This is great for anyone concerned about keeping their gun in the proper grip, and on target. A key upgrade for quick mag changes.”

C. Beretta Steel Recoil Spring Guide and Recoil RodIf you shoot a lot, it pays to upgrade to a steel recoil rod and spring. Fits all Beretta full sized series 90 pistols. It does not fi t the 92A1, 96A1 and the 90-TWO. Will not fi t Compact, Centurion, or Compact Type M pistols. Made in Italy.EU00031 ....................................... $21

For a video demonstration on how to change a mag catch from the left to right side, scan this QR code with your smartphone.

B. 92 Barrel 9mm Standard Blued Finish A true drop-in barrel with fi nished cham-ber that does not require any gunsmithing. A replacement for 92 Series. Features 4.9” (125mm) barrel with blued fi nish, chromed internal fi nish and standard muzzle. Fits: 96/96A1/90-TWO/Vertec/Brigadier/Elite. Made in USA or Italy.UD80989 .................................... $129

5


G. Beretta 92/96 Steel Trigger SetThe set includes trigger, trigger spring and D-version hammer spring, enabling you to replace the composite trigger of your pistol with one made of solid steel. It fi ts all Beretta full-sized series 90 pis-tols. Note: it will not fi t Billennium, Steel One or Combat models.E00691 ........................................$25

B.

F.1.

1.

2.

2.

3.

3.

4.

4.

D.

C.H.

G.

A.

E. A. Beretta 92/96 Steel Oversize Catch, Mag AssemblyCut down on your tactical reload time with this oversize magazine catch, which also makes it easier to feel and operate the mag-release button while wearing gloves. It fi ts all 92/96 series double-stack magazine pistols and is installed in minutes without gunsmithing. Black. Made in Italy.UD8A0203 .................................... $29

F. Factory 92FS Steel PartsThese Beretta factory steel compo-nents allow you to replace the polymer parts in your 92-series Beretta pistol with solid steel. The set includes: 1) re-coil guide rod, 2) safety lever assembly, 3) trigger, and 4) magazine release as-sembly. All parts are made in Italy and come with a durable black fi nish. They will fi t the following models without any gunsmithing: 92F, 92FS, M9, Elite, 92A1,* M9A1. *Note: item (1), the recoil guide rod, does not fi t the model 90-TWO and 92A1. E00706 ..................................... $69

D. Beretta 92/96 Target Adjustable Rear SightThe target adjustable rear sight brings out the full accuracy potential of your 92/96 pistol. Please visit berettausa.com for in-structions on how to install this accessory.E00169 .........................................$57

E. Beretta 92/96/98 Elite II Skeletonized HammerGive your Model 92/96/98 an aggressive look. Beretta factory original skeleton-ized hammer not only looks cool but can improve cycle time because of the lighter weight. Fits: Beretta 92FS/96FS/98FS/Briga-dier/Target. Made in Italy.UD5A0584 ................................... $34

H. Beretta 92/96 Locking Block Kit This kit helps your 92/96 series pistol stay in perfect working condition after many years of hard use. Includes: 1) recoil spring, 2) locking block, 3) locking block plunger, and 4) locking block pin. Note: 2 and 3 are 3rd generation and must be used together.LE9201 ................................................................. $36

C a l l 1 . 8 0 0 . 9 2 9 . 2 9 0 1

92 SERIES ACCESSORIES

6

C. LaserMax Guide Rod Laser Proven in more than 17 years of street and combat experience by SWAT, Special Forces, agencies, Presidential Security Services and other top-tier commands.

This internal guide rod laser is the most technologically advanced, hardened laser system you can buy. Because the laser sight installs as close to the barrel of the fi rearm as possible, it ensures the closest, most consistent relationship between your point of aim and point of impact over all shooting distances. It’s your call if the beam is on or off—a must in situ-ations when you don’t want to reveal your position. A convenient “on/off” switch is easily activated by right-or left-handed shooters, without altering the grip. Fits full size Beretta 92 (M9), Beretta 96 and Beretta Vertec (does not fi t Beretta’s 92A1, 96A1, or 90-TWO). Made in USA.LMS-1441 ...............................................................................$399

A. Beretta Laser Grips The Beretta Laser Grips have dual side-

activation buttons, rubber-over-mold construction, fully adjustable windage and

elevation, a master on/off switch and a Beretta trident logo! The lithium batteries (included)provide more

than four hours of on-time use with a fi ve-year shelf life. Applicable for Beretta Models 92 and 96 large frame, including Centurion, Elite II,

and Brigadier. Technical specifi cations: beam intensity is 5-mw peak, 633-nm, class IIIa laser, the maximum output allowable by federal law and technology. Dot size approximately 0.5” diameter at 50 feet. Made in USA. JG92LG302 .....................................Standard ........................................$299

Military Laser Grips (not shown)These grips are designed specifi cally for the demands of military use. This model exceeds standards for waterproofi ng, dust/salt/fog resistance and high/low tem-perature operation. Compared to our standard Lasergrips, this model features a more prominent rubber-overmolded front activation switch and aggressive textured side-panels, which are designed for maximum control with or without gloves. Made in USA.LG-402 .................................... Military Standard ................................... $359

B. Beretta 92F/FS Rail SystemA nice solution for quickly and easily adding versatility to pistols without a Picatinny rail. The easy to fi t and remove system clamps onto the trigger guard area and is secured by Allen screws, providing stability for mounted light or laser. CNC machined from aviation grade Aluminum. Weighs just 1.410 ounces. Imported.TDIBERA1 .......................... $48

D. .22LR Conversion KitEnjoy thousands of rounds of practice with your 92 series pistol without breaking the bank. Our bestselling conversion kit transforms your 92 series pistol into a .22LR practice handgun that looks and handles like its centerfi re counterpart. Included: steel .22LR barrel, aluminum slide with adjustable sights, FS manual safety and fi ring pin block device, recoil spring guide and spring, magazine loader and 10 round magazine. No gunsmithing required. Visit berettausa.com for a list of compatible models. J9022PK ...................$389

D.

A.

B.

C..

B. Hybrid HolsterYour Beretta 92/96 will literally disappear as you wear this inside-the-waistband holster designed for maximum concealability and comfort. Made by hand specifi cally for Beretta, it is adjustable for ride depth and cant. Also, it will distribute the handgun’s weight evenly against your body rather than downwards, making your 92/96 feel considerably lighter. Leather-backed and ventilated for soft and cool concealment. Right hand only. GI03INCIMRH ............$64

E. Beretta Magazine Speed LoaderThis compact, lightweight pistol speed loader makes it easy to load magazines to the maximum capacity. No more leaving the last round out because it is too hard to get in. Faster loading means you will maximize your shooting enjoyment. It’s designed to load most 9mm & .40 S&W caliber, double stack magazines, of any length. Made in Italy.JMSLDS ...........................................$9

A. Beretta Snaps Leather Black HolsterGreat-fi tting right hand belt holster positions exactly where you want it and makes for comfortable all-day wear. Black leather holster features an open back end and barrel end. Double snap fasteners secure holster to belt without requiring you to take the belt off fi rst. Max belt width: 1.57". Made in Italy.FO5000200099 ...............................................................$57

F. Beretta Holster for 92FS/96/92A1/ 96A1 – Right HandThanks to a reduced spacer and size, this thermo-formed ABS holster is ideal for concealed carry for police, military and sport (IDPA, IASC). The Paddle Belt attachment allows you to carry the holster without the belt, while ensuring stable extraction of the pistol. The High Ride System can be used with belt widths from 1.4" to 2.2" (3.5 – 5.5cm). Holster comes with Paddle Belt and High Ride System. Made in Italy.FO8000170999 ................................................................. $49


92 SERIES ACCESSORIES

7

C. Mesh Logo CapOur black Beretta cap, with breathable mesh sides and back. Moisture-wicking Q3 fabric on the front panels delivers complete comfort no matter how hot the action. Cotton/poly-ester. Color: 999)black. Imported. BC969143One Size Fits Most ...................... $20

nels ete B.

A.

B.

C.

D.F.

F.

D. Tactical Belt Our dual layered 1½" belt is hand-crafted from Premium Grade A bull hide from the fi nest tanneries available (the thickness will be a tad shy of ¼"). Extremely comfortable, this sturdy belt will carry a fi rearm plus accessories all day without sagging. Stitched with heavy-duty nylon thread. This belt will last for years and continue to func-tion as intended. Made in USA. BL0104130999 .............. Black Even sizes 34-44 ......................$99BL0204130802 .............. Brown Even sizes 34-44 ....................$99

E.

C. Uni-Max Micro Red Laser Though it fi ts virtually any fi rearm with an accessory rail, this ultra lightweight, compact laser is perfect for Beretta’s Px4 Sub-Compact. The durable design features a bright 5mW constant red beam, automatic 10-minute shutoff, and dual tap-on activation switch for right, and left-handed shooters. Quick and easy installation. User adjustable for windage and elevation. More than 5 hours of battery life. Made in USA.LMS-MICRO-B ................................................. $129

B. LaserMax Genesis Rechargeable Green Laser: The First of Its KindThe fi rst laser that combines a compact and ruggedly durable green laser with a battery that’s rechargeable. And it fi ts virtually any fi rearm with an accessory rail, including Beretta’s PX4 Compact and Storm Compact. The green laser is visible during any level of lighting, both day and night. With Genesis, you don’t have to worry about a dead battery standing in your way when you need a laser the most. Battery life: 2.5 hours. Micro USB port for easy charging; power supply included. Made in USA or imported. LMS-GEN-B ......................................................$249

PX4 SERIES LASERS

ghting, Genesis, you don’t hav

orry about a dead batte

C a l l 1 . 8 0 0 . 9 2 9 . 2 9 0 1

8

D. Crimson Rail Master White LightThis instantly-activated tactical white light makes it easy to see your target in nighttime conditions. Produced by indus-try leader Crimson Trace, the unit is installed in a matter of minutes on any handgun equipped with a Picatinny or Weaver rail. While producing a bright light, the unit is small and does not interfere with the balance of your fi rearm. Light activation modes are: Constant On, Momentary, Strobe (or Dazzler). Made in USA.CMR-202 ..................... $129

A. Tactical Classic Cap Basic black or non-glare silver in a soft, comfortable all-cotton cap. Adjustable back strap for a custom, comfort fi t. Low-profi le Beretta embroidery along the visor. Col-ors: 0999)black, 077A)silver. Imported.BC012908 ............One Size Fits Most....................$20

black silver

.............. $129

E. & F. High Performance Bags Effortlessly carry boxes of ammo to the range—plus your earmuffs, eye-protection and accessories—with these com-pact bags from our High Performance line. Constructed of heavy-duty nylon, they offer plenty of inside space and outside zippered compartments for all your range needs, plus a detachable shoulder sling and a padded handle for easy carry. Choose between our Range Bag and Range Bag With Bottom Compartment. Color: 0501. Imported. E ...BS200189 ....... Range Bag With Bottom Compartment 13" x 12" x 14" ........................... $90F ...BS230189 ........Range Bag 11" x 6" x 8" ................................ $59

A.

C.

D.

E.

F.

B.

PX4 SERIES PARTS

A. Adjustable Rear Sight & Front SightMake more accurate shots with this three white dot system. Fits on: PX4 Full Size, Compact, Special Duty. For the installation we suggest using tool code # UD6A0027, PX4 and 8000 Rear Sight Tool or have the installation performed by an Authorized Beretta Service Center.E00457 ......................................................... $69

B. Beretta PX4 Magazine Release Kit (3pcs) High, Medium and LowCustomize your PX4 with a magazine release that best suits your hand size and grip. Our kit gives you three easy-install size options, from low to high. Made in Italy. E00343..........................$24

Customer Review: “After reading the fi rst review I purchased the Magazine extension and spring for my PX4 Compact 9mm. I tried it both ways, with the longer spring and the original spring, it works both ways but the original spring allows the 18th round to be installed with ease; it gives you a spare spring as well, win-win. I also agree with the other reviewer that it looks real cool as well! I recommend it.”


D. Beretta PX4 Full and Compact Sized Barrels 9mm The factory replacement barrels for the PX4 pistol feature a durable matte black outside and a chromed inside fi nish. Compact: 3.2"(3.8" overall length); Full size: 4.0" (4.6"over-all length). Both barrels are extended by .6" (15mm) to accommodate threading. Caliber: 9mm. Made in Italy.JBPX49CEXT ..............Compact ........................ $169 JBPX49FEXT ...............Full Size ........................ $169

9

F. PX4 Tactical KnifeModeled after the ones currently used by the Navy SEALS. The PX4 Knife has an aluminum sure-grip handle, 3.54" 440C stainless steel blade with a hardness rating of HRC 56-58. Blade thickness: 0.16"; overall knife length: 8.27". Coated in a non-refl ective PTFE black. Imported.CO7404500900 ............................................ $99

C. High Performance Pistol RugsProtect your investment with a pistol rug from our High Performance line. These rugs, with their easy-opening, heavy-duty coil zippers can handle all Beret-ta’s sub-compact/compact pistols. The water-resistant, scratch-resistant, anti-shock exterior is heavy-duty nylon with 1½" foam padding inside. Carry handle. Color: 0501)blue. Imported.FO840189 .... 10" .................$22FO910189 .... 8"..................$19

rted..........$22........$19

E. Beretta PX4 Series Extended Magazine Pad & Spring, 9mm & .40 S&WGet more rounds out of your maga-zine with an easy to install pad exten-sion. Increases the capacity of .40 S&W from 14 to 17 rounds and a 9mm from 17 to 20 rounds. Made in Italy.E00344 .40 S&W ...........$24 E00345 9mm ..................$24

A.

B.

C.

D.

E.

F.

Customer Review: They are just that deadly accurate, I had them installed by a gunsmith (highly recommended) on my PX4 .40 S&W full size. I intend to buy two more sets of these sights for my PX4 9mm full size and my PX4 .40 S&W subcompact.

Px4 STORM ACCESSORIES

PX4 Series Magazines. Made in Italy. ITEM NUMBER PRICEFactory Px4 Storm 9mm 15 rds JM4PX915 $40

Factory Px4 Storm 9mm 17 rds JM4PX917 $40

Factory Px4 Storm 9mm 20 rds JM4PX920 $40

Factory PX4 Storm .40 S&W 14 rds JM4PX4014 $40

Factory PX4 Storm .40 S&W 17 rds JM4PX4017 $40

PX4 Storm Sub-Compact 9mm 13 rds Snap Grip JMPX4S9E $44

PX4 Storm Sub-Compact 9mm 13 rds Standard JMPX4S9F $40

PX4 Storm Sub-Compact .40 S&W 10 rds Snap Grip JMPX4S4E $44

PX4 Storm Sub-Compact .40 S&W 10 rds Standard JMPX4S4F $40

Factory PX4 Storm Compact 9mm 15 rds JM88400 $44

Factory PX4 Storm Compact 9mm 10 rds JM88510 $44

Factory PX4 Storm Compact .40 S&W 12 rds JM88404 $44

PX4 Storm SD .45 ACP 10 rds Heavy Duty JMPX4510 $44

C. PX4 Sub Compact Magazine AdapterA simple, smooth solution that delivers the feel of a full size pistol. Adapts the full size PX4 magazine for use in your PX4 Sub-compact pistol. No tools required for assembly. Magazine sold separately. Made in USA. EU00036 .........................................................................$14

Left hand version available!D. PX4 Storm Paddle

and Belt HolstersIdeal for concealed carry. Thanks to its reduced spacer and size, our thermo-formed nylon holster is the perfect solution for police, military and sport (IDPA, IASC) who carry concealed weapons. The high-ride holster system fi ts a wide range of belts (3.5-5.5cm) and also comes with a paddle belt attachment. Designed to stay stable during extraction of the pistol, the paddle lets you carry the holster without attaching it to your belt. The paddle also allows for quick removal and reattachment of the holster. Color: 0999)black. Made in Italy.FO790017 ......................right full size .............................................$49FO840017 ......................left full size................................................$49FO830017 ......................right subcompact .......................................$49FO880017 .....................left subcompact .........................................$49GI03CNPXC ...................right subcompact .......................................$49

C a l l 1 . 8 0 0 . 9 2 9 . 2 9 0 1

10

A. PX4 MagazinesFeed your Beretta PX4 reliably through original Beretta factory magazines. Choose be-tween standard, snap-grip for comfortable full-hand grip on your subcompact, or heavy duty for quick tactical reloads. Made in Italy.

B. Quick-Wicking Tactical Sport CapKeep your cool in every situation with our quick-wicking, quick-drying, quick-cooling hat. Tech savvy cap lets fresh air circulate around your head, while it lets heat out. Cotton and

polyester. Color: 0999)black. Imported.BT129145 ............... One Size Fits Most ....................... $20

A.

B.

C.

D.

E. Night Sites KitThe Beretta Nano Trijicon Night Sights are among the brightest in the industry. Filled with tritium gas, they feature a sapphire front lens that focuses light and is impervious to solvents. The lamps are silicone cushioned so they can take years of use, and come with a full warranty. Solid steel, matte black, made in USA.EU00038 ................................. $105

D. Beretta BU Nano Laser CENTERFIRE LaserMaxDesigned and optimized specifi cally to fi t the Beretta Nano, this laser sight offers a smooth, snag-free profi le and easily mounts on the frame without gunsmithing or alterations to the pistol. It features a red laser with constant beam, with ambidextrous controls for right- and left-handed shooters; and the patented Controlled Activation™ system lets you choose when the laser turns on, and won’t reveal your position while holstering, unholstering, reloading, or moving. CF-NANO .......$129Price may be lower at berettausa.com

NANO Series


11

B. Handmade Nano SuperTuck Holster The most comfortable and concealable holster available has bulletproof construction and a design that won’t give you away. Adjustable for ride depth and cant, the SuperTuck features new corrosion-proof steel clips, micro holes for breathability and premium grade leather back-ing. Mounting spacers behind the clips allow for easier tucking. These incredible holsters are made by hand in a small shop in Italy. Steel mounting hardware for the clip attachments included. GI03-INCI-RH ........................... $64

C. Nano 9mm Magazine Designed for the rigors of concealed carry, the Nano’s 9mm magazine and follower are constructed entirely of polished stainless steel. The polymer fl oorplate completely covers the bottom of the Nano’s grip-frame to reduce the introduction of foreign contaminants and create a uniform grip. Magazine capacity: 6 rounds. Made in USA.JM6NANO ...... 96 round ...............$34 JM8NANO ...... 98 round ...............$38

F. Nano BarrelEasily replace your Beretta Nano barrel with a genuine factory part. The replacement 9mm barrel is drop-in and requires no gunsmithing while giving you the strictest Beretta factory tolerances. Made in USA.UD5A1009 .................................$86

C.

E.D.

F.

See how easy it is to wear the Nano SuperTuck holster. Scan this code with your smartphone.

B.

A. Nano Grip FrameKeep your Beretta Nano looking new with this factory grip frame replacement. Since the serial number of the Nano is on the stainless steel chassis, the technopoly-mer grip frame can be easily exchanged or replaced like other accessories. Made in USA.UD5A0910 ...........black ................$39UD5A1260 ...........dark earth ........$39UD5A1259 ...........OD green .........$39UD5A1261 ...........pink .................$39

A.

12

BOBCAT & TOMCAT Series

BOBCAT & TOMCAT GRIPS CODE PRICE

Beretta GRIPS 21 Bobcat Plastic JG21P $15

Beretta 21 Wood Grip with medallion UD99018 $40

Beretta 3032 Tomcat Plastic Grips JG32P $15

Beretta 3032 Tomcat Walnut Wood Grips Set UD6A0354 $40

BOBCAT, TOMCAT, JETFIRE MAGS CODE PRICE

Factory Jetfi re Mag 21 .25ACP 8RDs JM955 $31

Factory Tomcat mag 3032 .32ACP 7RDs JM32 $29

Factory Bobcat Mag 21 .25ACP 8RDs JM25 $31

C a l l 1 . 8 0 0 . 9 2 9 . 2 9 0 1

A. GripsModify the looks of your Beretta Bobcat or Tomcat with elegant walnut grips, or replace your old holster-worn factory grips with new plastic ones with the classic Beretta logo. Note: the replacement grips do not come with grip screws.

B. MagsThese Jetfi re, Bobcat and Tomcat magazines enable you to feed your compact pistol with Beretta-factory reliability.

C. Tomcat Ankle-Band Leather HolsterWith deep concealment, com-fort and quality are paramount. This premium leather holster fi rmly but gently hugs your ankle with a fully adjustable wide wraparound strap designed to minimize friction and feel soft against the skin. Fully adjust-able. Leather safety strap with Velcro® close. Removable adjustable calf strap. Black only. Made in Italy.FO1700200099 ..................$75

D. Genuine Beretta Gun OilGive your guns the ultimate level of protection against corrosion with specially formulated, authentic Beretta Gun Oil in either a squirt or spray bottle. Our water-repellent action cleans and sea-sons your fi rearm’s surface, reduces wear and friction between moving parts and offers exceptional corrosion pro-tection, even from salt spray. Made in Italy.OL32000209 ......................25-ml Squeeze Bottle ......................$8OL36000209......................125-ml Spray Bottle.......................$12

nn ItIttaala y.yyyy000000000020202000000000000999999999 .................$7$7$7755555

E. Portable and Secure Ammunition Box Precision machined to perfection from a single block of aluminum, the base and cover are brushed, polished and inspected for perfect alignment by hand. INOX steel screws with anti-intrusion heads hold the cover, hinges and

lock in place. An integrated key lock ensures a high degree of built-in security. Under the hood, a super-resistant foam prevents rattling and secures

cartridges even when the ammo box is held upside down. Made in Italy.

ZERO-22-22LR-BL .......22lr 100 round......$89

and e

12

E. Portable Precision machinbrushed, polishedsteel screws with

lock in place. Aof buresi

c

ZERO

A.

B.

C.

D.

E.

Shown assembled with NEOS pistol, sold separately.

B. Beretta U22 Neos Multi-Purpose Tool

This unique tool allows the user to adjust and dis-assemble the U22 Neos pistol. It features four tools: 1) Hex key to remove grip 2) Hex key to adjust trigger overtravel stop (DLX mod-els only) 3) Screwdriver bit

to adjust rear sight windage 4) Slotted key to remove rear sight blade. UD5A0729 ............................................$24

U22 NEOS SERIES

BB.B.. BeBeB reretta U22 NeMMMMMMMMMMMulululululuuuu titiitt --Purpose To

This ththee uasassaa ssemmpppipip ssstto111)1)1) Hee2)2) HHeooverteels on

to adjdjustt rerereararar ssigightht windi h bl dC. Beretta Neos U22 Front Sight Set of 5

Put away the nail polish or specialized paint. Our set of fi ve front sights (red, white, orange, yellow, black) ensures you’ll always have the right color to match the conditions or your preferences. UD6A0283 ....................................................................... $35

A. U22 Neos Carbine KitThe U22 Neos Carbine Kit adds another level of performance and modularity to the U22 Neos product line. The kit allows you to transform the pistol into a handy “plinker” carbine or lightweight “camp gun,” with easy disassembly and compact transportation. A barrel/fore-end/top-rail assembly and a stock unit easily replaces the pistol’s barrel and grip using the supplied multi-purpose tool. A TRUGLO™ orange fiber-optic front sight is standard, as well as a fully adjustable aperture rear sight, to provide fast target acquisition. Both sights are removable and replaceable. The barrel features a built-in machined aluminum Weaver™-style rail that allows mounting of optics using stan-dard mounts. Every U22 Neos pistol and carbine may be acces-sorized with a complete line of products. Made in USA.JU22CK1 ................................................................... $249

• Converts your U22 Neos pistol into a light and compact carbine • Includes barrel and stock assemblies and multipurpose tool • Allows mounting of optics with an Aluminum Weaver™-style top rail • Features a rubber butt plate • TRUGLO™ orange fi ber optic front sight, fully adjustable aperture rear sight • Uses pistol’s magazine, slide and receiver assembly • Now approved for sale in California

13


D. Burris FastFire Increases AccuracySimplify the act of aiming and eliminate the need to focus on and align your sights and target. The FastFire’s aiming red dot and target are always in focus and aligned for the ultimate in accuracy.

Fully waterproof and low mounting, it has repeatedly proven its toughness on the slides of high power semi-autos, slug guns, shotguns and high-power rifl es. Special bases are available for most fi rearms. Lithium CR2032 battery (lasts up to 5 years) included. Imported.300233........................................................................$199

E. U22 Neos .22 LR 10-Round Magazine

Guaranteed for reliable fi t and function, these Beretta factory magazines are

made of stainless steel under strict tolerances specifi cally for the U22

Neos. Great as a replacements or spares, these comfortably loading

magazines will function reliably for years with proper care.

Made in USA.JMU22 .................. $25

A.

A.

B.

C.

D.

E.

CX4 STORM SERIES

B. CX4 Top Picatinny RailDesigned of aluminum and fi nished with black anodizing. Comes with three mounting screws and two nutplates. Ideal for scopes, lights, lasers, grips, etc. Super lightweight. Color: black E00268 ..................................................... $59

A. Cx4 Storm Barrel Shroud 9mm, .40 S&W, .45 ACPProtect yourself from a hot barrel with our pre-cision-machined, aircraft-grade aluminum shroud. Fits all CX4 models (when installed will not fi t in original case). Military spec acid-etched for anti-glare. As the shroud does not suppress sound, it is legal to own in all 50 states. Made in USA.EU00029 .................................................$124

C. Burris AR P.E.P.R.™ Tactical MountsThe P.E.P.R.™ stands for Proper Eye Position Ready for combat rifl escopes. The ring bases on these Burris Mounts are milled as a single, tough unit and provide 2" of forward scope positioning. The top of the rings feature Picatinny rails for mount-ing additional accessories. 410343.........1 inch........$79

G. Cx4 Storm Vertical Long GripSuper lightweight, bi-function vertical grip al-lows a natural “Fighting Stance” hold on your Cx4 Storm. Designed for mounting onto a standard Picatinny or Weaver rail system. Wa-terproof compartment for batteries. Molded from reinforced polymer composite. EU00004 .........................................$33Price may be lower at berettausa.com

E. Cx4 Storm Bottom & Side Accessory Rail KitFully accessorize your CX4 with scopes, lights, lasers and grips! Used with the side rail provided with the CX4 Storm carbine, this kit fi nishes out the two side rail posi-

tions and adds the bottom rail. Constructed of super light-weight black polymer. Allows for attachment of any Weaver mount assembly. Comes with four mounting screws.E00270................$54

D. Cx4 Storm Carry CasePerfect for safely transporting your Cx4 Storm to and from the range. Constructed of durable nylon, this padded case is roomy enough even when you have fully accessorized with a scope, front grip and tactical light. Two internal straps keep everything in place. Carry handle and de-tachable shoulder strap included.FO4000140099..................$70

F. Cx4 Storm Cocking HandleTwo are better than one. Reversible handle can be installed on both sides simultaneously.C79898 .....................................$19

H. Cx4 Storm Folding Grip, 4 PositionMulti-angular, 4-position folding steady grip locks at horizontal, vertical, 45°, & 135° positions to give you improved performance during rapid fi re. Light-weight grip is easy to fi t and secure on a Picatinny or Weaver rail. Molded from reinforced polymer composite. Length in vertical position: 4½ inches/11.5cm. No gunsmithing required. EU00025 ...................................$50

The innovative CX4 Storm is accurate, soft-shooting and readily accepts a large assortment of accessories.

D.

C a l l 1 . 8 0 0 . 9 2 9 . 2 9 0 1

14

A.

A. B.

B.

C.

D.

E.

E.

F.

G.

H.

H.

F.

OPTICS

C. BURRIS RINGS ITEM NUMBER

PRICE

Burris - Xtreme Tactical Rings - NB: TWO RINGS Medium 1/2"

420162 $59

Burris - Xtreme Tactical Rings - NB: TWO RINGS High 3/4"

420164 $59

Burris - Xtreme Tactical 1 Inch Matte Black High 3/4" Height Two Rings

420182 $59

B. Burris Speed Dot 135 Red-Dot SightA sight that holds up to brutal punishment and delivers a crisp, perfectly round, bright, adjustable brightness dot. The rugged, nitrogen-fi lled 35mm main tube is waterproof and fog proof. A huge fi eld-of-view provides fast target acquisi-tion and the fully coated lenses offer a crisp, clear, non-refl ective sight picture. Featuring 11 brightness settings, it is available in either a 3MOA size dot for precision shooting or an 11MOA dot for super-fast action shooting. Includes Weaver-style mounting rings and an easy-to-fi nd #2032 camera battery with a 200+ hour life at the highest setting. Matte black fi nish.300200 ....................................................................$198

C. Burris Xtreme Tactical Rings


A. Burris Xtreme Tactical SpeedDot SightTactical shooters know all about extremes. The worst weather. Oppressively bright sun. Pitch darkness. The repeated recoil of automatic weapons. Whatever extremes you have to deal with, the XTS-135 Xtreme Tactical SpeedDot can handle it. It’s waterproof, fog-proof and shockproof, and the sight’s high defi nition 5 MOA red dot has 11 brightness settings to adapt to the full range of light. Matched up with Burris XTR Rings, the tough little sight can be mounted ultra-low for superior compactness or high enough to clear iron sights. Weight: 5 ounces. Matte black fi nish. Imported.300205............................................................ $239

D. Steiner 8x30 Military/Marine BinocularA tough, compact binocular that offers plenty of magnifi -cation, rainproof construction, and maximum versatility. After years of use in a variety of settings—from moun-taintops to deep canyons, aboard and ashore—Steiner’s refi ned design offers everything for the sportsman, whether spotting game or exploring nature. Exception-ally clear, bright, powerful and fi eld-rugged, these binocu-lars feature Steiner’s unique auto-focusing that puts all the action in focus at once. Durable rubber armoring; guaranteed not to fog or leak internally (10-year limited warranty). Long eye-relief (20mm) for eyeglass wearers. Field of view: 360 feet at 1,000 yards. 4.6"L x 6.8"W x 2.4"H. Made in Germany.280S................. $239

15

One look and you know Xtreme Tactical Rings are all about point-of-aim security and durability. The super-strong yet surprisingly lightweight, six-screw aluminum rings anchor scopes in place on any Picatinny rail or Weaver-style base to deliver unfailing return-to-zero.

A.

B.

C.

D.

See more optics at: at: berettausa.com/opticss

SAKO ACCESSORIES

MODEl CODE ACTION CAPACITY CALIBER PRICE

TRG 22 S5740384 TRG 22 10 308 Win $250

TRG 42 S5740387 TRG 42 7 300 Win Mag $250

TRG 42 S5740385 TRG 42 5 338 Lapura $250

A. Sako TRG Picatinny Rail LOW PROFILE This Low Profi le Sako rail is an accessory Picatinny adapter for Sako TRG, compatible with USA Mil-Std 1913. By installing this adapter on the top of the Sako TRG action, onthe rifl e can be used scope mounts built for the Picatinny rail.STRLPP ..................................................................................... $330

B. SAKO TRG 22/42 Muzzle Brake Screw-on fl ash eliminator/muzzle brake. Asymmetrical construction minimizes sand/dust puffi ng when shooting.S5740412...........................$199

C. TRG SCOPE MOUNTS Quick detachable, machined for a perfect fi t on the TRG receiver. Will not cause loss of zero when remounting. Solid steel. Made in Finland.

F. Sako TRG 22/42 Bipod This bipod lets the rifl e “hang” below the hinge-point offering very steady shooting position even with large and heavy scopes on the rifl e.S5740495.................................................. $548

G. Sako TRG Magazine, BluedThese durable steel magazines are straight from the Sako factory. Choose your model and caliber from the table. Made in Finland. S574038.................................................... $250

E. Sako TRG 22/42 Emergency Front Sight Steel construction. Adjusts for windage and elevation. Adjusting tool and all mounting screws included. Note: This sight will only fi t the Sako TRG 22/42 rifl es with the phosphatized fi nish. The barrel on the phospha-tized models is machined with a groove to allow for the fi tting of the Emergency Front Sight.S5740321.................................$239

D. Sako TRG 22/42 Emergency Rear Sight Steel construction. Two position, folding peep aperture. Features recoil stop and mirage strap attach-ment capabilities. Note: This sight will only fi t the Sako TRG 22/42 rifl es.S5740311...........................................................$239

C. TRG SCOPE MOUNTS CODE WIDTH PRICESako TRG Quick Detachable Optilock - Medium Height S5740327 35.5 mm 1 inch daimeter $450

Sako TRG Quick Detachable Optilock - Medium Height S5740328 36.5 mm 30 mm diameter $450

Sako TRG Quick Detachable Optilock - H/L S5740326 40.5 mm 1 inch diameter $450

Sako TRG Quick Detachable Opitlock -H/L S5740325 32.5 mm 30 mm diameter $450

C a l l 1 . 8 0 0 . 9 2 9 . 2 9 0 1

16

A. B.

C.

C.

D.

F.

E.

G.

LONG GUNSA. Burris Eliminator™ LaserScope Your days of losing sight of your trophy while guessing yardage and holdover are over. In a split second, the Eliminator ranges the target, calculates the trajectory, and illumi-nates the perfect holdover. Starting with the fi eld-proven and bright crystal-clear optics of the original Burris LaserScope, the Eliminator provides a sophisticated yet very simple and accurate means of tailoring the scope’s trajectory compensation to virtually any cartridge. The sophisticated technology is simple to use, too. Once the few easy steps of programming are completed, your info will always be stored in the scope, even with a dead battery. A proprietary mounting system allows for the lowest possible mounting. Go to berettausa.com to see the mounting system that works best for you. Imported.200112B .................................................................................................................................................$899

E. Beretta Universal Cleaning Kit (Rifles, Pistols & Shotguns)A complete rifl e, pistol and shotgun cleaning set in a well-organized, du-rable synthetic carry case with heavy-duty latches. Everything you need to clean all your fi rearms, including brass bore brushes, mops, cleaning patches and three 6-piece brass cleaning rods to handle the full range from .17 caliber to 12 gauge. Dimensions: 9”x12”x1.5”. Made in Italy. • 6 Brass Rods • 9 Bore Brushes • 9 Cotton Mops • 2 Rag Pullers • Patches ST01CR ...............$64

C. Beretta Gel-tec Cheek ProtectorBeretta Exclusive. Made of the same shock-absorbing silicon gel as our popular recoil pad, the Gel-tec Cheek Protector eliminates bruised cheeks. The protector is easily moved from gun to gun—hundreds of times—without losing its effec-tiveness. Clear in color so your stock shows through, it works equally well on wood or synthetic stocks. Made in Italy.E00378 .............. Protector .12" thick ...................$29E00489 .............. Protector .24" thick ...................$29


17

ope the Eliminator provides a sophisticated

Other Burris binocs and scopes can be found at: berettausa.com/burris

A.

C.

B.

D. Balance Cap: Three interchangeable weights con-stitute the Balance Cap. This system allows the shooter to achieve the per-fect balance. A resistant anodized fi nish on the Balance Cap allows the shooter to compete anytime, anywhere. Fits all Beretta A400 stocks.

Item Type Color Wt. PriceC8A799 Light Blue 1.4 oz $58

C5E586 Medium Black 3.9 oz $35

C5E587 Heavy Silver 6.3 oz $38D.

E.

4 See all of our cleaning kits: berettausa.com/guncare

B. Beretta Gun Pod Unit The Beretta Gun Pod is a revolutionary digital display that mounts to the grip cap of your shotgun. It provides a digital readout of the ambient air temperature, the cartridge pressure of the round fi red and the overall number of rounds fi red, making it perfect for the serious shotgun shooter. E8A119............. ...............................$215

D.

C a l l

CHOKE TUBES

B. TX4 Stand Off Device Optima HP Choke Tube CLSix Point Hex Breacher made from 6061 Mil Spec Aircraft Aluminum for light weight. This unit was designed for its radical look. It is a full functioning muzzle brake / recoil reducer, but do not let the looks fool you, it is still a func-tional breacher for occasional use.JCTAC1 .............................................................. $159

WARNING: Use of the Optima HP choke

tube in an Optima fi rearm (without the

HP designation) can cause severe damage

to the choke tube and barrel when the

shotgun is fi red. Only use Optima HP

choke tubes in these Optima HP shotguns:

SV10 Perennia, SV10 Prevail, A400 Xplor

and UGB25 Sporting.

More Chokescan be found at:

berettausa.com/chokes

A. Beretta Choke Tubes OptimaChoke HP Designed specifi cally to fi t the newest generation of Beretta fi rearms, our OptimaChoke® HP tubes stand up to the heat of competition. Manufactured from high- strength steel and fi nished in a nickel-alloy coating, these chokes guar-antee signifi cant corrosion resistance and have the ability to withstand the rigors of steel shot. OptimaChoke® HP tubes are fully interchangeable on all Beretta barrels that are threaded for Optima-Choke® HP. Visit berettausa.com for a detailed chart on which choke tube fi ts your Beretta fi rearm. Made in Italy.

CODE 12 GAUGE FLUSH PRICEC62070 F (Full)

$54

C62071 IM (Improved Modifi ed)C62072 M (Modifi ed)C62073 IC (Improved Cylinder)C62074 C (Cylinder)

CODE 12 GAUGE 3/4“ EXTENDED PRICEC62178 F (Full)

$60

C62179 IM (Improved Modifi ed)C62180 M (Modifi ed)C62181 IC (Improved Cylinder)C62182 CL (Cylinder)

C62183 SKEU (European Skeet)

CODE 12 GAUGE 2” EXTENDED PRICEC62263 F (Full)

$65

C62264 IM (Improved Modifi ed)C62265 M (Modifi ed)C62273 IC (Improved Cylinder)C62274 CL (Cylinder)C62269 EF (Extra Full)

CODE 20 GAUGE FLUSH PRICE

C61848 F (Full)

$54

C61849 IM (Improved Modifi ed)C61850 M (Modifi ed)C61851 IC (Improved Cylinder)C61852 C (Cylinder)

CODE 12 GAUGE 3/4“ EXTENDED PRICEC62139 F (Full) gray

$70

C62140 IM (Improved Modifi ed) blackC62141 M (Modifi ed) greenC62142 IC (Improved Cylinder) yellowC62143 CL (Cylinder) blueC62144 SK (Skeet) pink

C a l l 1 . 8 0 0 . 9 2 9 . 2 9 0 1

18

12 GAUGE FLUSH

12 GAUGE 3/4“ EXTENDEDCompetitionwith color coded aluminum band

12 GAUGE 2” EXTENDEDHunting (Not for Over & Unders)

20 GAUGE FLUSH

12 GAUGE 3/4“ EXTENDEDCompetition

Correct band to green

B.

w w w . b e r e t -t a u s a . c o m

CHOKE TUBES & MORE

More Recoil Padscan be found at:

berettausa.com/recoil

Code Gauge Constriction Type

JCTUBE21 20 F FlushJCTUBE22 20 IM Flush

JCTUBE23 20 M Flush

JCTUBE24 20 IC Flush

JCTUBE28 20 CL Flush

JCTUBE27 20 SK Flush

Code Gauge Constriction TypeJCTUBE13 12 F Flush

JCTUBE14 12 IM Flush

JCTUBE15 12 M Flush

JCTUBE16 12 IC Flush

JCTUBE18 12 CL Flush


JCTUBE33 28 F FlushJCTUBE34 28 IM FlushJCTUBE35 28 M FlushJCTUBE36 28 IC FlushJCTUBE38 28 CL FlushJCTUBE37 28 SK Flush

A. Beretta Mobilchoke Choke TubesThe Beretta Mobilchoke tubes offer you the same choke system as the latest Beretta US-made semi-auto shotgun, the A300 Outlander. These choke tubes are original Beretta factory replacements for shotguns that feature the Mobilchoke system. Beretta Mobilchoke tubes are available in two versions: • Flush—for 12, 20 and 28 gauge• Extended—adding 25mm and 50mm for 12 gauge (available online).These choke tubes are treated against corrosion; they are designed to resist stress and to offer maximum durability. See Chart Below..........................................$30


19

A.

B. MICRO-CORE Field Recoil Pad SOFT, LIGHT AND FITTABLE! A further step forward in performance. Soft, light and able to slide during shouldering. MICRO-CORE is an innovative recoil pad developed by Beretta thanks to its experiance matured over decades on competition fi elds around the world. MICRO-CORE expands gradually and instantly, increasing its surface area on the shoulder and giving the shotgun secure and precise support.E7300 ................................................$45

Code Application Thickness

E73004 Field .79"

E73005 Field .59"

E73006 Field .39"

E73021 Skeet/Sporting .51"



E73024 Trap .51"

E73025 Trap .71"

E73026 Trap .91"

Note: for use only in shotguns that feature the Mobilchoke system.

B.


JCTUBE43 .410 F Flush

JCTUBE44 .410 IM Flush

JCTUBE45 .410 M Flush

JCTUBE46 .410 IC Flush

JCTUBE48 .410 CL FlushJCTUBE47 .410 SK EU Flush

A. Beretta 92 Techno Pistol Case for Storage, Display or Transport This is the most advanced gun case on the market today, with its rugged milled alumi-num frame to its ¼” thick acrylic display panels, and it’s dual-sided inbuilt keylocks. You can feel safe about the secu-rity of your Beretta 92. This is a handgun case with a differ-ence, featuring a see-through structure and inbuilt key-

lock that lets handguns be securely stored and displayed. The leading edge of gun storage, this multifunctional model features a plexiglas cutout custom fi t to the 92, a dummy mag mount, and a cutout for the magazine. The dummy mag, due to its precise design will not damage the pistol in any way. The dummy mag can also be locked in place so that the handgun can be displayed both horizontally and vertically. 13.2"H x 11"L x 3 "D. Weight is 7 lbs. Made in Italy.TFGSB-92-BER..............$350 Prices may be lower at berettausa.com

PRSRT STD

US POSTAGE

PAIDBERETTA USA CORP.

Beretta Catalog Dept. 17601 Beretta Drive,Accokeek, MD 20607

Customer Source Code

800.929.2901 www.berettausa.comFind Beretta on:

B. Pistol VaultOur heavy-gauge steel vault will keep one or two of your pistols safe and secure from everyone but you. Deep foam padding fully protects your fi rearms. Five-button Simplex lock opens in seconds for fast access when you need it. Change the combination as often as you want. Holes on bottom for secure attach-ment. Small vault comes with a locking cable that can run through the bottom holes for quick security. Made in USA. LB1000...Large 12½" X 8¼" X 3".......$200LB2000...Small 9½" X 7¼"X 2¼" .......$175

B.

A.

Documents

BERETTA 2013 PROSHOP