Embed Size (px)
Citation preview
Company Profile MIL rel 1.1
BER srl Company Profile
Systems Integrator since 1990
Made in Italy with pride
Company Profile MIL rel 1.1
BER has been established since 1990 in the field of industrial electronic weighing. Starting from
the activities of design and production of "embedded electronic systems", and becoming today, on
the basis of the acquired experience a System Integrator” for the milling sector.
Our main product range are:
Weighing systems for cereals (continuous, batch, or weight loss):
o Flow systems weight: flow detection and/or flow regulation
o Batch weighing systems: flow detection and/or flow regulation
o Screw dosing and vibrating channel dosing: volumetric and gravimetric
o Weighing systems on the tape
o Dosage microingredients
o Mixing plants and mixture creations
Handling powders and granules systems for the optimized management of raw materials
Pneumatic Conveying System
Print and apply labels systems
Inkjet and laser marking
Packaging equipment
Development programs on PLC and HMI systems
Software and S.C.A.D.A. applications
Electronic design (on Customer Specifications)
BER began his career making electronic equipment for machine builders. This has allowed BER, to
acquire more skills in the milling sector.
BER creates advanced solutions, and fully integrated into the automation of the company,
providing comprehensive support, from design to commissioning of all hardware and software, and
post-sales support.
BER makes even simple adjustments to legacy systems with the integration or replacement of
parts for the adaptation to the new regulations in terms of safety, efficiency and energy savings.
By partnering with companies operating in the fields of engineering, electronics and mechanics,
BER can take charge of the whole process of design, construction, commissioning, ensuring the
competence, professionalism, quality, and compliance with the internal procedures of the
contracting authority.
Company Profile MIL rel 1.1
CUSTOM PRODUCT
BER has started his designing and building electronic microprocessor.
And electronic equipment on customer specifications
Company Profile MIL rel 1.1
FOOD SECTOR
For this sector, BER, produce weight systems for cereals, flour, rice, mais.
DF100, DF20, POND12
These scales are equipped with electronic system that permit a connection to the PC or PLC or
Supervisory (SCADA).
These systems are very strong and reliable and it is possible to measure flow with high precision.
These systems are intended to:
Mills for the processing of wheat, flour, corn, etc. ...
Industry for the processing of rice
DINAMIC DOSING SYSTEM MODEL DP
These equipment are used for measuring flow in continuous. These systems are less precise than
the firsts but are very compact and are mounted where isn't enough space. All metal parts, that
touch the product, are stainless steel AISI304 or AISI316
Company Profile MIL rel 1.1
VOLUMETRIC DOSER
In order to obtain mixtures of flours is necessary to add additives (eg gluten, malt, etc. ..). With
these dispensers is possible to obtain mixtures for different uses with accuracies of 1 .. 3%. All
metal parts, that touch the product, are stainless steel AISI304 or AISI316:
This is one example:
Company Profile MIL rel 1.1
GRAVIMETRIC DOSER
For more precision BER produces dosers with load cell. This is applied both the volumetric to
gravimetric. All metal parts, that touch the product, are stainless steel AISI304 or AISI316.
This link show one gravimetric dosing system in function:
http://www.youtube.com/watch?v=-jqkyVge5aQ
The accuracy is, in this case, is of 1 grams in 8 hours of work.
EXAMPLE OF DOSAGE FLAVOURS (VIDEO)
GARLIC: http://sdrv.ms/1gSFEmu
CHIVE: http://sdrv.ms/1bmY3jk
MUSHROOMS: http://sdrv.ms/1laLq0e
PARSLEY: http://sdrv.ms/1laLzkh
Company Profile MIL rel 1.1
AUTOMATION FOR THE GRINDING MILLS CEREALS
BER offers solutions for upgrading older machines. In order to save money. An example is to
eliminate the oil, used to operate the rolling mills for grinding grain, and apply the electric motors
controlled by an inverter. PYROMILL is a particular system that measures the temperature of the
grinding rolls to control the intensity of the grinding and to avoid overheating:
VIDEO PYROMILL: http://sdrv.ms/1c3pUsq
CONTROL DEVICES CLEANING SLEEVES FILTERS
BER has recently released the new FLT family of devices for monitoring cleaning of bag filters.
This device is fully digital, it has a color touchscreen and an optional differential pressure for the
complete management of the cleaning of the filter. It exists in 3 versions:
FLTMOT management device cleaning with stepper motor and valve 24 Vdc
FLT8 management filters with 8 valves at 24Vdc
FLT32 management filters with 32 valves at 24Vdc
FLTMOT FLT8 / FLT32
Company Profile MIL rel 1.1
FLOUR MIXING PLANTS
BER manufactures complete solutions of the systems for the creation of flour mixtures
VIDEO:
https://onedrive.live.com/redir?resid=816804E5E629D333!1
38&authkey=!AJa8nh_RUEOB1wQ&ithint=video%2cMOV
LOADING SYSTEMS
BER Provide various system of transport: screw and pneumatic system
Company Profile MIL rel 1.1
DAMPING SYSTEMS
The automatic damping system is constituted by:
Moisture probe with included flow weighing plate
Hydraulic panel for damping
Automatic water dosing device The moisture probe is enclosed in a stainless steel housing, mounted on a sliding frame frame for its extraction during inspection and maintenance. The detection probe is designed for realime determination of hectolitre weight, temperature and dielectric constant of the product. Such information is processed for determination of incoming initial moisture percentage. The flow weighing plate and instantaneously detects the throughput of product entering the damper. Once determined the incoming product moisture, and its throughput rate, a microprocessor calculates the quantity of water that shall be added to the product flow for reaching desired final moisture content, and arranges for setting the hydraulic section for its addition. It is also possible to program and memorize various different working programs that correspond to the same number of different processing, plus one for emergency or maintenance. The Humidity sensor is available in this following models:
ADS1-30 until 30 tons/h
ADS1-40 unt il 40 tons/h
ADS1-100 until 100 tons/h
Company Profile MIL rel 1.1
DRYING PLANTS
To extend the shelf life of the products, packed, it is necessary to reduce the moisture before the
final packaging. BER realizes drying plants of various kinds:
SOFTWARE CONTROL AND SUPERVISION
BER manufactures electrical and supervision programs of the mill with remote control.
BER Monitoring Farm Silo Levels with remote control
Company Profile MIL rel 1.1
IDENTIFICATIONS AND TRACKING
BER has been operating for years in the printing and reading of barcode
labels, barcode, bar code, automatic identification and traceability of
batches of production with the development of customized software.
BER has an important operational expertise, currently boasts
collaborations with industry leading brands , Datalogic , Intermec ,
Motorola , Honeywell, Zebra Opticon.
In recent years we have witnessed the integration of RFID systems , RF-
ID portals , Industrial Printers , WiFi Terminals , Terminals Batch, ecc..
in the process of wrapping, packaging , fine line production and Sorter
fulfillment .
BER has looked at this aspect of growing and today the DAP (Packaging Automation Division ) is a
reality. We therefore propose as suppliers of:
Machines or systems ( turnkey ) for end of line
Material Handling
Automatic labeling
Systems Palletizing
Company Profile MIL rel 1.1
PACKAGING
LOW CAPACITY SYSTEM PACKAGING
This is the low capacity line (from 0,5 to 1
kg) to fill and close preformed paper bags
for granular and powder products. The
machine works In linear mode, completely
mechanically without the help of vacuum
pumps or suction caps.
The dosing units systems are completely
electronically controlled according to the
latest technologies. The line is fitted with
electronic check weighing system and feed
back control.
The picking of the empty bags and their
opening are due to a vacuum generated by
a simple air turbine. The movement of the
filled bags is positioned onto a vibrating
channel that allows the exact filling. Before
the closure there is another check-weight
control.
The wrong weight bag is automatically
ejected. The closure can be executed in
different ways (hot melt, hot sealing,
labelling or seaming).At the end of the line
the bags are folded, pressed and closed with the printing of data and production lot.
We can also supply lines complete with: weight control systems, automatic bundling machine with
heat shrinking ovens, transport and pillarization for single bags or sachets.
Vertical screw volumetric Pressing system date Final electronic weight control
dosing system for powder application
products and granular fines
Company Profile MIL rel 1.1
HIGH CAPACITY SYSTEM PACKAGING
Automatic Bag Placer for pre-made open mouth bags with total control system for filled bags
Suitable for free flowing and semi free flowing products bagging such as:
Agriculture [seed, beans, cereal, corn, grass seed, organic pellet fertilizer]
Foods [wheat, corn, rice, cereals, maize grits, wheat flour, maize flour, maize
meal, pollard, pellets, semolina, malt, sugar, salt, coffee]
Animal Feed [animal feed, mineral feed, concentrated feed]
Petrochemicals [plastic granules, resin powders, etc.]
FEATURES: SEVERAL FEEDING DEVICE AVAILABLE DEPENDING ON PRODUCT TO BE HANDLED (Gravity, Belt, single or double
screw, turbine)
CAPACITY FROM 4 TO 10 BAGS/MIN (capacity depends on product, line configuration, bag sizes, etc.)
SEVERAL BAG CLOSING SYSTEM AVAILABLE (sewing, heat sealing, pinch, gluing, etc.)
USER’S FRIENDLY OPERATOR INTERFACE
OPTIONS DUST TIGHT AUTOMATIC SPOUT
AVAILABLE WITH SIMPLEX OR DUPLEX BAGGING SCALE
MOTORIZED QUICK HEIGHT ADJUSTMENT FOR BAG CLOSING CONVEYOR
DEAREATION PROBES FOR AIR EXCESS REMOVAL BEFORE BAG CLOSING
DEAREATION BARS FOR AIR EXCESS REMOVAL BEFORE BAG CLOSING
ELECTRO-MECHANICAL BAG SHAKER FOR A PROPER PRODUCT SETTLING
WALKABLE WEIGHER'S SUPPORT FRAME COMPLETE WITH GUARD RAILS AND LADDER
SS304 PRODUCT CONTACT PARTS
IN-LINE BAG CHECK WEIGHER AND DEDICATED BAG REJECTOR (mod. NP)
IN-LINE BAG METAL DETECTOR AND DEDICATED BAG REJECTOR (mod. MD)
PROFIBUS DP OR SERIAL COMMUNICATION INTERFACES
Company Profile MIL rel 1.1
BER srl Via Dell’Edilizia, 67 36100 VICENZA - ITALIA
Tel. +39 0444 566297 Fax. +39 0444 280687
[email protected] www.ber.it
Siège tunisiens GABES Mr. Mohamed Souissi Tel +216.23016412 email [email protected]
Systèmes et pièces de rechange pour les minouterie et les usine d’aliments pour animaux
VICENZA
MILANO
BOLOGNA
TORINO
ROMA
NAPOLI
PALERMO
BARI
VENEZIA
VICENZA
VENETO
Milano
Bologna
Udine
VENEZIA
TREVISO
BELLUNO
ROVIGO
PADOVA VERONA
ITALIA
