Beltronics 955manual

8/11/2019 Beltronics 955manual

1/16

Beltronics5442 West Chester Road

West Chester OH45069 USA

USA 800-341-2288www.beltronics.com

2011 BeltronicsDesigned and Manufactured In Canada

Features, specifications and prices subject to change without notice.Model: V955


2/16

The Bel V955 is the most advanced radar,laser and safety detector ever designed byBeltronics. The Bel V955 includes full X, K,SuperWide Ka, and Safety Warning Systemradar capability, front and rear laserdetection, varactor-tuned (VTO) microwavereceiver, digital signal processing (DSP)for superior range and reduced falsealarms, our patented Mute and AutoMute,

audible and visual band alerts, and all theperformance youd expect from Beltronics. In addition, the Bel V955 introducesthe following revolutionary features: Varactor-tuned receiver provides

long-range protection against allradar threats

New easy-to-use Programming letsyou customize up to 6 features

New AutoScan mode intelligentlyreduces unwanted false alarms, plusHighway and City settings

Ultra-bright text-display provideseasy to read information from any

angle Detects and decodes Safety WarningSystem messages

If youve used a radar detector before,a review of the Quick Reference Guide onpages 4 and 5, and the Programminginformation on pages 12 and 13 will brieflyexplain the new features. If this is your first detector, please readthe manual in detail to get the most out ofyour V955s outstanding performance andinnovative features. Please drive safely.

Congratulations Quic

1

FCC Note:Modifications not expressly approvedby the manufacturer could void theusers FCC granted authority to operatethe equipment.

R

emovecardalongperforations


3/16

Table of Contents

Quick Reference Guide

Installation

Power Connection

Mounting Location

Windshield Mount

Controls and Features Power and Volume Control

Power-on indication

Voice

AutoMute

Mute

Highway / AutoScan / City Button

Brightness and Dark Mode

Audible Alerts

Power Connector

Signal Strength Meter

2

Quick Reference Card

BELTRONICS V955Quick Reference Card

* Factory Default Settings

Press the RVW buttonto go from one category

to the next

PILOT

(Power-on indication)

VOICE

POWER-ON SEQUENCE

AUTOMUTE

CITY MODE SENSITIVITY

BANDS

Pilot HWY

Pilot H

Voice ON

Voice OFF

PwrOn STD

PwrOn FST

aMute ON

aMute OFF

City STD City LoX

City NoX

Bands DFT

Bands MOD

POP ON orOFF(de fault is off)

SWS ON orOFF(de fault is off)

TSR ON orOFF(de fault is off)

Press the CHG button to change your setting within a category

* Full word: Highway or AutoScan or City

Letter: H or A or C

* Voice alerts on

Voice alerts off

* Standard power-on sequence

Fast power-on sequence

* AutoMute on

AutoMute off

* Standard City mode sensitivity Low X band sensitivity in City Mode

No X band sensitivity in City Mode

* Factory default settings

Factory default settings modified

Turn bands ON or OFF by

pressing the VOLUME/MUTE button

Remove card along perforations

Removecardalon

gperforations


4/16

Radar Antenna and Laser LensThe rear panel of your V955 should ha clear view of the road ahead. For besperformance, do not mount the V955directly behind windshield wipers

or tinted areas.Page 6

Alphanumeric Matrix DisplayYour V955s display will show HighwAutoScan, or City as its power-on indiIf you prefer, you can choose other po

on indications.Page 12-14 During an alert, the display will inradar band, and a precise bar graph ofstrength.Page 10 NOTE: In the Dark Mode the dispwill not light during an alert.Page 9

Quick Reference Guide

To begin using your V955,just follow these simple steps

1 Plug the small end of the power cordinto the side jack of the detector, andplug the large end of the power cordinto your cars lighter socket.

2 Mount your V955 on the windshield

using the supplied windshield mount.

3 Press the PWR button, located top left,to turn the V955 on.

4 Press and hold the Volume/Mutebutton to adjust the volume.

Please read the manual to fully understandyour V955s operation and features.

QuickMount SlotInsert the V955s adjustable Windshieldmount into this slot.Page 7

QuickMount ButtonPress the button, and slide the Windshieldmount into one of its four locking positions.Page 7

City ButtonSwitches between AutoScan, City andHighway, settings. In general, werecommend AutoScan.Page 9

PowerPress the PWR button to turn the V955 onor off.

AutoMuteYour V955s patented AutoMuteautomatically reduces the volume level ofthe audio alert after a brief period. If youprefer, you can turn AutoMute off.Page 8

ProgrammingYour V955 is ready to go, just plug it in andturn it on. But you can also easily change 6features for your preferences.Page 12-14

4


5/16

Power ConnectionTo power your V955, plug the smallend of the power cord, (telephone-typeconnector) into the modular jack on theV955s right side, and plug the lighter plugadapter into your vehicles lighter socket oraccessory socket.

Your V955 operates on 12 volts DCnegative ground only. The lighter plugprovided is a standard size and will workin most vehicles. However, some vehiclesmay require the optional European sleeveto ensure a snug fit. If so, simply call ourservice department to order one. Thissleeve slides over the lighter plug. Ofcourse, your lighter socket must be cleanand properly connected for properoperation.

NOTE: Depending on your vehicle, thelighter socket power may either becontinuously on, or it may be switched onand off with your ignition switch.

Optional power cordsSee the Accessories section for details onour optional coiled SmartPlug or Direct-wire power cords.Page 25

Mounting LocationWARNING: BELTRONICS cannot anticipatethe many ways the V955 can be mounted.It is important that you mount your V955where it will not impair your view norpresent a hazard in case of an accident.

Where to mount your V955For optimum detection performance, werecommend the following:

Using the QuickMount bracket, mountyour V955 level, and high enough on yourfront windshield to provide a clear view ofthe road from the front and rear.

Mount the V955 away from windshieldwipers, other solid objects, and heavilytinted areas that might obstruct the radarantenna or laser lens.

6

Installation

Windshield QuickMountThe V955s QuickMount bracket isdesigned for unobtrusive and hassle-fmounting.

1 Depress the QuickMount buttonthe top of the V955 (by the wordBELTRONICS) and slide the QuickMobracket into the slot until it is locked ithe position which best fits the angle your windshield (there are four settinavailable). For extremely horizontalor extremely sloped windshields,the QuickMount bracket canbe bent.

To ensure that the suction cupsadhere to the windshield firmly, be sukeep both your windshield and the sucups clean.

2 To adjust the V955 on your winduse the QuickMount adjustment buttolocated on the top of the V955, and sli

the V955 forward or backward to obtlevel horizontal position.When installed and adjusted properlyback top edge of the V955 should restsolidly against your windshield.


6/16

Controls and Features

PowerTo turn your V955 on or off, press the PWRbutton located on the top. When you turnyour V955 on, it goes through a sequenceof alerts. If you prefer, you may program yourV955 for a shorter power-on sequence. Seethe Programming section for details.

VolumePress and hold the Volume/Mute buttonlocated on the top case to adjust the V955salert volume level. The audio will ramp upand down, accompanied by a bar-graphon the display. Once youve reached yourpreferred audio level, simply release thebutton.

Power-on indicationAfter the V955s start-up sequence iscomplete, the alphanumeric display willshow Highway, AutoScan, or City toindicate which sensitivity mode is selected. If you prefer, you can select alternate

power-on displays. See the Programmingsection for details.

Voice AlertsThe V955 provides digital voiceannouncements of radar and laser bandsdetected. If Safety Radar (SWS) is turnedon, a safety radar message will also beannounced. See the Programming sectionfor details. If you prefer, you can turn Voice Alertsoff. See Programming section for details.

AutoMuteYour V955 has our patented AutoMutefeature. After the V955 alerts you to a radarencounter at the volume you have selected,the AutoMute feature will automaticallyreduce the volume to a lower level. Thiskeeps you informed without the annoyanceof a continuous full-volume alert. If you prefer, you can turn theAutoMute feature off. See the Programmingsection for details.

MuteThe Mute button, located on the V955s topcase, allows you to silence the audio alertduring a radar encounter. To mute the audio for a single specificsignal, briefly press the Mute button. Afterthat radar encounter has passed, the mutewill automatically reset and the audio willalert you to the next encounter.

8

Highway / AutoScan / City ButtonThe City button selects the V955ssensitivity mode. We recommend theAutoScan mode for most driving. Your V955s AutoScan mode provlong-range warning, with minimum faalarms. In this mode, the V955s interncomputer continuously analyzes allincoming signals and intelligently filtefalse alarms. You can also select conventionalHighway and City modes. When drivinurban areas where annoying X-bandintrusion alarms and door openers arecommon, City mode can be engaged tlower X-band sensitivity and reduce Xalerts. Full sensitivity is maintained onother bands. You can also customize yV955s City mode sensitivity, includinX mode. See the Programming sectiodetails.


7/16

Controls and Features

10

Power ConnectorThe V955s power jack uses a telephone-type connector. This 4-conductorconnector only works with the includedpower cord, optional direct-wire, orSmartPlug cord. For more information or to order, callus toll-free at 1-800-341-2288.

Signal Strength MeterYour V955s alphanumeric display consistsof 280 individual LEDs, to provide anintuitive ultra-bright display of signalstrength and text messages. The V955s standard bar-graph signalstrength meter only displays informationon a single radar signal. If there aremultiple signals present, the V955s internalcomputer determines which is the mostimportant threat to show on the bar-graphmeter. When your V955 detects radar, itdisplays the band (X, K, or Ka), and aprecise bar-graph of the signal strength.

When your V955 detects a laser signal, thedisplay will show LASER. NOTE: If you are operating the V955in the Dark mode, the display will not lightwhen a signal is detected, only the audiowill be heard.

Audible Alerts

For Radar signals: Your V955 uses a Geiger-counter-likesound to indicate the signal strength andtype of radar signal being encountered. When you encounter radar, a distinctaudible alert will sound and occur faster asthe signal gets stronger. This allows you tojudge the distance from the signal source

without taking your eyes from the road. Each band has a distinct tone for easyidentification.

X-band = chirping K-band = buzzing Ka-band = double-chirp POP = full double-chirp

For Laser and POP signals: Since laser and POP signals (if turnedon) are a possible threat no matter howweak, the V955 alerts you to these bands atfull strength.

For Safety signals: Your V955 will alert you to thesesignals with a double-beep tone, and acorresponding text message. A completelisting of the text messages is on page 21.

Programming

There are 6 user-selectable options socan customize your V955 for your owpreferences. The buttons labeled CITYBRT are also used to enter the ProgramMode, REVIEW your current programsettings, and to CHANGE any settingsdesired. The words PGM, RVW, and CHlocated on the top of the detector, andhighlighted in colored graphics. Pages14 explain each option in more detail

How to use Programming1 To enter Program Mode, preshold both the CITY and BRT buttodown for 2 seconds.The unit will btwice, and will display the word Prog

2 Then press the RVW button toreview the current settings. You caeither tap the button to change from ito item, or hold the button to scroll ththe items.

3 Press the CHG button to chan

any setting.You can either tap the bto change from setting to setting, or hthe button to scroll through all the op

4 To leave the Program Mode,simply wait 8 seconds withoutpressing any button, or press the

button.The unit will display Complebeep 4 times, and return to normaloperation.


8/1612

Overview of Programming

Pilot HWY

Pilot H

Voice ON

Voice OFF

PwrOn STD

PwrOn FST

aMute ON

aMute OFF

City STD

City LoX

City NoX

Bands DFT

Bands MOD

POP ON orOFF (default is off)

SWS ON orOFF (default is off)

TSR ON orOFF (default is off)

Press the CHANGE button to change your setting within a category

* Full word: Highway or AutoScan or City

Letter: H or A or C

* Voice alerts on

Voice alerts off

* Standard power-on sequence

Fast power-on sequence

* AutoMute on

AutoMute off

* Standard City mode sensitivity

Low X band sensitivity in City Mode

No X band sensitivity in City Mode

* Factory default settings

Factory default settings modified

Turn bands ON or OFF by

pressing the VOLUME/MUTE button

Press the REVIEW buttonto go from one category

to the next

PILOT

(Power-on indication)

VOICE

POWER-ON SEQUENCE

AUTOMUTE

CITY MODE SENSITIVITY

BANDS

*Factory Default SettingsTo reset your V955 to its originalfactory settings, press and hold theCITY and BRT buttons whileturning the power on. The V955sdisplay will provide a Resetmessage, accompanied by an audiblealert, acknowledging the reset.

Details of Programming

Pilot (Power-on indication)NOTE: When you are using the Dark mthe display will only show HD, AD, or (Highway-Dark, AutoScan-Dark, or CityDark).

Pilot HWY(Full description)In this setting, your V955 will displayHighway, City, or AutoScan as its pon indication. (factory default)

Pilot H(Letter)In this setting, your V955 will display Highway, C for City, and A for AutoS

VoiceVoice On(Voice announcements onIn this setting, all radar, laser, and SWSmessages (if programmed) will beannounced using a digital voice.

Voice Off(Voice announcements oIn this setting, only the distinct audio will be heard when a radar, Laser, or S

message is detected.


9/16

14

City Mode SensitivityCity STD(Standard)In this setting, when you put your V955 inthe City mode, X-band sensitivity issignificantly reduced, to reduce annoyancefrom X-band intrusion alarms and motionsensors. (factory default)

City LoX(Low X band sensitivity)In this setting, when you put your V955 in

the City mode, X-band sensitivity is reducedmore than the standard setting. This willreduce X-band alarms from other sourceseven further, but also significantly reducesrange to X-band traffic radar.

City NoX(No X-band sensitivity)In this setting, when you put your V955 inthe City mode, V955 will not respond toany X-band signals.

NOTE: These settings only applywhen the V955 is operated in Citymode. X-band sensitivity is notaffected when used in AutoScanor Highway modes.

WARNING: Only choose this settingif you are absolutely certain thatthere are no X-band traffic radar

units where you drive.

BandsBandsDFTIn this setting, all North American radar andlaser frequencies are monitored. This is thefactory setting and it is recommended thatyou use your V955 in this mode.

BandsMODIn this setting, your V955 will warn youwith an audible alert, and associated text

message stating which band has changedfrom the original factory setting (i.e. SWSON). This warning is displayed during thestart up sequence (standard or fast).

Details of Programming

Features and Specifications

Operating Bands X-band 10.525 GHz 25 MHz K-band 24.150 GHz 100 MHz Ka-band 34.700 GHz 1300 MHz Laser 904nm, 33 MHz bandwidthRadar Receiver / Detector Type Superheterodyne, VTO

Scanning Frequency Discriminator Digital Signal Processing (DSP)

Laser Detection Quantum Limited Video Receiver Multiple Laser Sensor Diodes

Display Type 280 LED Alphanumeric Bar Graph 3 Levels of Brightness, plus Dark Mo

Technical Details


10/16

16

Technical Details

Interpreting AlertsAlthough the V955 has a comprehensivewarning system and this handbook is ascomplete as we can make it, onlyexperience will teach you what to expectfrom your V955 and how to interpret whatit tells you. The specific type of radar being

used, the type of transmission (continuousor instant-on) and the location of the radarsource affect the radar alerts you receive. The following examples will give youan introduction to understanding the yourV955s warning system for radar, laser andsafety alerts.

Explanation

You are approaching a continuous radarsource aimed in your direction.

An instant-on radar source is being usedahead of you and out of your view.

An instant-on radar source or laser source isbeing used nearby. This kind of alert requiresimmediate attention!

Laser is being used in the area. Because laseris inherently difficult to detect, any laser alert

may indicate a source very close by.

A moving patrol car with continuous radar isovertaking you from behind. Because thesesignals are reflected (reflections are increasedby large objects), they may or may noteventually melt into a solid point even whenthe patrol car is directly behind you.

Alert

The V955 begins to sound slowly, then therate of alert increases. The Signal Meter rampsaccordingly.

The V955 emits short alerts for a few secondsand then falls silent only to briefly alert andfall silent again.

The V955 suddenly sounds a continuoustone for the appropriate band received. Allsegments in the Signal Strength Meter are lit.

A brief laser alert.

The V955 receives weak signals. These signalsmay be a little stronger as you pass large,roadside objects. The signals increase infrequency.

Alert

The V955 alerts slowly for a while and tabruptly jumps to a strong alert.

The V955 alerts intermittently. Rate andstrength of alerts may be inconsistent o

wildly.

The V955 alerts intermittently. Rate andstrength of signal increases with each a

The V955 gives an X-band, or K-band aleintermittently.

h l l


11/16

18

Technical Details

How Radar WorksTraffic radar, which consists of microwaves,travels in straight lines and is easilyreflected by objects such as cars, trucks,even guardrails and overpasses. Radarworks by directing its microwave beamdown the road. As your vehicle travels intorange, the microwave beam bounces offyour car, and the radar antenna looks forthe reflections. Using the Doppler Principle,

the radar equipment then calculates yourspeed by comparing the frequency ofthe reflection of your car to the originalfrequency of the beam sent out. Traffic radar has limitations, the mostsignificant of these being that it typicallycan monitor only one target at a time. Ifthere is more than one vehicle withinrange, it is up to the radar operator todecide which target is producing thestrongest reflection. Since the strength ofthe reflection is affected by both the sizeof the vehicle and its proximity to theantenna, it is difficult for the radar operator

to determine if the signal is from a sportscar nearby or a semi-truck several hundredfeet away.

Radar range also depends on thepower of the radar equipment itself.The strength of the radar units beamdiminishes with distance. The farther theradar has to travel, the less energy it has forspeed detection. Because intrusion alarms and motionsensors often operate on the samefrequency as radar, your V955 willoccasionally receive non-police radar

signals. Since these transmitters are usuallycontained inside of a building, or aimedtoward the ground, they will generallyproduce much weaker readings than willa true radar encounter. As you becomefamiliar with the sources of these pseudoalarms in your daily driving, they will serveas confirmation that your V955s radardetection abilities are fully operational.

How POP WorksPOP mode is a relatively new feature forradar gun manufacturers. It works bytransmitting an extremely short burst,

within the allocated band, to identifyspeeding vehicles in traffic. Once the targetis identified, or POPPED, the gun is thenturned to its normal operating mode toprovide a vehicle tracking history, (requiredby law).

How Laser (Lidar) WorksLaser speed detection is actually LIDA(Light Detection and Ranging). LIDARguns project a beam of invisible infrarlight. The signal is a series of very shorinfrared light energy pulses, which moin a straight line, reflecting off your careturning to the gun. LIDAR uses thespulses to measure the distance to a veSpeed is then calculated by measurin

quickly these pulses are reflected giveknown speed of light.

LIDAR (or laser) is a newer technand is not as widespread as conventioradar, therefore, you may not encountlaser on a daily basis. And unlike radardetection, laser detection is not proneto false alarms. Because LIDAR transma much narrower beam than does radait is much more accurate in its ability distinguish between targets and is alsmore difficult to detect.AS A RESULTEVEN THE BRIEFEST LASER ALERTSHOULD BE TAKEN SERIOUSLY.

T h i l D il


12/16

20

Technical Details

How Safety Radar WorksSafety Warning System, or SWS, uses amodified K-band radar signal. The SWS safetyradar system has 64 possible messages (60currently allocated). The SWS messagesyour V955 can display are listed on thefacing page. From the factory, your V955 isprogrammed with SWS decoding OFF. IfSWS is used in your area, your V955 will

display the safety messages associated withthe signal. If you wish to detect this system,use the Programming feature to turn theV955s SWS decoding ON. NOTE: Some of the safety messageshave been condensed, so that each messagecan be displayed on one or two screens onthe V955s eight-character display. Since Safety radar technology isrelatively new, and the number oftransmitters in operation is not yetwidespread, you will not receive Safetysignals on a daily basis. Do not be surprisedif you encounter emergency vehicles, road

hazards and railroad crossings that areunequipped with these transmitters. AsSafety transmitters become more prevalent(the number of operating transmittersis growing every day), these Safety radarsignals will become more common.

SWS Text MessagesHighway Construction or Maintenance1 Work Zone Ahead2 Road Closed Ahead/Follow Deto3 Bridge Closed Ahead/Follow De4 Highway Work Crews Ahead5 Utility Work Crews Ahead6 All Traffic Follow Detour Ahea7 All Trucks Follow Detour Ahea8 All Traffic Exit Ahead

9 Right Lane Closed Ahead10 Center Lane Closed Ahead11 Left Lane Closed Ahead12 For future useHighway Hazard Zone Advisory13 Stationary Police Vehicle Ahe14 Train Approaching/At Crossing15 Low Overpass Ahead16 Drawbridge Up17 Observe Drawbridge Weight Lim18 Rock Slide Area Ahead19 School Zone Ahead20 Road Narrows Ahead21 Sharp Curve Ahead

22 Pedestrian Crossing Ahead23 Deer/Moose Crossing24 Blind/Deaf Child Area25 Steep Grade Ahead/Truck Use L26 Accident Ahead27 Poor Road Surface Ahead28 School Bus Loading/Unloading29 No Passing Zone30 Dangerous Intersection Ahead31 Stationary Emergency Vehicle 32 For future use

TSR Signal Ranking SoftwareYour radar detector includes a newoptional boost in anti-falsing software toeliminate excessive alerts from erroneous Xand K-band sources. One example of this istraffic flow monitoring systems. Thesesystems, which are becoming more widelyused in several countries, generate K-bandsignals to measure the flow of traffic on agiven road. Unfortunately most detectors

see this as a real threat and willalert you to it unnecessarily. Ournew proprietary software (TSR),intelligently sorts, ranks and rejects thistype of false alarm automatically. The resultis ultimate protection without excessivefalse alarms. The TSR software is set up as an optionand can be activated through theProgramming section. We suggest you turnTSR on if you are experiencing extremefalse alerts in your area. If not, your detectoris ready to start protecting you right out ofthe box.

If you have any questions about thisnew feature, please give us a call or visit ourwebsite for more details.

T bl h ti


13/16

22

Troubleshooting

Problem

The V955 beeps briefly at the samelocation every day, but no radarsource is in sight.

The V955 does not seem sensitiveto radar or laser.

The V955 did not alert when apolice car was in view.

The V955 did not provide a Safetysignal while within range of anemergency vehicle.

The V955s display is not working.

The V955s audible alerts are lessloud after the first few alerts.

The V955 bounces or sags onwindshield.

The V955s power-on sequencereoccurs while you are driving.

Solution

An X or K-band motion sensor or intrusion alarm islocated within range of your route. With time, you will learnpredictable patterns of these signals.

Make sure that windshield wipers do not block your V955sradar antenna and that the laser lens is not behind tintedareas. Determine if your vehicle has an Instaclear, ElectriClear

or solar reflective windshield which may deflect radar or lasersignals. Your V955 may be in City Mode.

VASCAR (Visual Average Speed Computer and Recorder) astopwatch method of speed detection, may be in use. Officer may not have radar or laser unit turned on.

Safety transmitters may not be commonly used in your area.

Press the BRT button to deactivate Dark Mode.

The V955 is in AutoMute Mode. See page 8 for details.

The V955 is not making contact with the windshield toprovide stab ility. While holding down the V955s QuickMountbutton, slide the V955 toward the windshield so that the backtop edge makes firm contact.

A loose power connection or dirty lighter socket can causethe V955 to be briefly disconnected.

Problem

Your 14-year old son has changedall 6 of the Programming options.

The V955 will not turn on.

The V955 feels very warm.

S

fw

Explanation of Displays

AD Sensitivity control is i

HD Sensitivity control is i

CD Sensitivity control is i

No display The V955 is in the Da

PilotHWY One of the many prog

WorkZone One of the many Safe

Caution The V955 has detecteenough to decode the

Self Cal The V955 is running

Service The V955 has failed thRequired

S i W t d A i


14/16

24

Service

Service ProcedureIf your V955 ever needs service, pleasefollow these simple steps:

1 Check the troubleshooting section ofthis manual. It may have a solution to yourproblem.

2 Call us at 1-800-341-2288. We may beable to solve your problem over the phone.

If the problem requires that you send yourV955 to the factory for repair, we willprovide you with a Service Order Number,which must be included on the outside ofyour shipping box.

Enclose the following information withyour V955: Your Service Order Number Your name and return address Your daytime telephone number A description of the problem you are

experiencing Copy of original purchase receipt

Beltronics Extended Service PlanBeltronics offers an optional extendedservice plan. Call Beltronics for details at1-800-341-2288

Out Of Warranty RepairsFor out of warranty repairs, includeprepayment in the amount you werequoted by the Beltronics Customer ServiceRepresentative. If the detector has beendamaged, abused or modified, the repaircost will be calculated on a parts and laborbasis. If it exceeds the basic repair charge,you will be contacted with a quotation.If the additional payment is not received

within 30 days (or if you notify us that youchoose not to have your V955 repairedat the price quoted), your V955 will bereturned, without repair. Payment can bemade by check, money order, or credit card.

Ship your V955 and power cord to:

BELTRONICSCustomer Service DepartmentService Order Number ______________5442 West Chester RoadWest Chester OH 45069

For your own protection, we recommendthat you ship your V955 postpaid andinsured. Insist on a proof of delivery, andkeep the receipt until the return of yourV955.

Warranty and Accessories

BELTRONICS One Year Limited WarWhat this warranty covers:BELTRONwarrants your Product against all defectsmaterials and workmanship.For how long:One (1) year from the dathe original purchase.

What we will do:BELTRONICS, at ourdiscretion, will either repair or replace yoProduct free of charge.

What we will not do:BELTRONICS wilpay shipping charges that you incur for syour product to us.

What you must do to maintain thiswarranty:Show original proof of purchfrom an authorized BELTRONICS dealer.

Warranty Exclusions:Warranty does napply to your product under any of thefollowing conditions: 1. The serial numbebeen removed or modified. 2. Your produbeen subjected to misuse or damage (incwater damage, physical abuse, and/or iminstallation). 3. Your product has been moin any way. 4. Your receipt or proof-of-puris from a non-authorized dealer or internauction site including E-bay, U-bid, or othauthorized resellers.

To obtain service:1. Contact BELTRON800-341-2288) to obtain a Return Authornumber. 2. Properly pack your product a

include: your name, complete return addwritten description of the problem withproduct, daytime telephone number, andcopy of the original purchase receipt. 3. Lthe outside of the package clearly with yReturn Authorization number. Ship the ppre-paid (insured, for your protection) toBeltronics Inc, 5442 West Chester Rd., WChester, OH 45069.


15/16

26 27

Register

online:

@

www.

beltronics

.com

BELTRONICS

PRODUCT

REGISTRATION

CAR

D

Ifyoupurchasedyourdet

ectordirectlyfromB

ELTRONICS,

youdono

tneedtofillthisout.

955

Removecardalongperforations

D I G I T A L R A D A R L A S E R S A F E T Y D E T E C T O R


16/16

28

Removecardalon

gperforations

Documents

Beltronics 955manual