Upload
hamien
View
230
Download
0
Embed Size (px)
Citation preview
Beghelli specializes in commercial, industrial lighting and life safety products. Beghelli designs, develops and manufactures state of the art innovative lighting solutions.
Beghelli’s Lighting product line specializing in industrial, commercial and architectural luminaires. Featuring Energy saving LED’s, DLC and BAA approved products.
Beghelli’s Photovoltaic and Solar line, featuring off grid systems, kits and on grid energy saving backup systems. For more information visit BeghelliPlanetSun.com (look for the PV symbol throughout this catalog for key solar applications).
FIELD APPLICATION GUIDE
A guide to your every application, combining emergency, lighting and solar!
Acciaio BX960 FloodAppllication: Landscape Location: Miramar, FL
LEGEND & GUIDE
PRODUCT CERTIFICATIONSAll Beghelli products are properly certified by CSA, UL or ETL laboratories.
RESOURCESENERGY STAREnergy Star is an international standard for energy efficient consumer products originated in the United States of America. It was created in 1992 by the Environmental Protection Agency and the Department of Energy.www.energystar.gov/
BAAThe Buy American Act (BAA) establishes a preference for the federal government, when purchasing supplies for use in the United States, to purchase products mined, produced, or manufactured in the United States.www.recovery.gov/
DESIGNLIGHTS CONSORTIUMThe DLC is a collaboration of utility companies and regional energy efficiency organizations committed to raising awareness of the benefits of efficient lighting in commercial buildings.www.designlights.org/
Red = Luce Products Yellow Green = Emergency Products
SPECIAL FEATURE ICON GUIDE
This Icon Guide highlights important features that a product has.
LED technology Produced in the USA (Buy American Act)
PV/Solar compatible Suitable for Hazardous locations
Available for “Quick Shipping” Sanitation listed for food prep areas
Design Light Consortium Listed Product
INDUSTRIALFOOD PROCESSING REFRIGERATION PARKING DECKS WAREHOUSE HAZARDOUS
retail hospitality education OFFICES
Landscape/ WALL WASH SIGNAGE KEY JOBS
PRONTO SOLE 15 & 30 PRONTO SOLE BUS STOP KIT PRONTO SOLE CUSTOM PRONTO SOLE LIFESTYLE PRONTO SITE & AREA
07
13
21
25PV-SOLAR
COMMERCIAL
EXTERIOR
08
14
22
26 27 2829 30
23 24
16 18 20
09 10 11 12
TABLE OF CONTENTS
LIGHTING SOLUTIONS
14
2
53
6
Landscape Solar Office
Stairwell/Corridors Parking Garage Outdoor
1
4
2
5
3
6
8
INDUSTRIAL I FOOD PROCESSING
Note: Key features shown here, for full list of features and benefits please see the product specification sheets.
FTZ PLUS WET/IP66
• Heavy duty die-cast construction
• Impact resistant polycarbonate cover
• Low profile design
• Universal mounting configurations
BS100LEDWET/IP66 • (2’, 4’)
• 100% polycarbonate construction
• 3500K, 4100K & 5700K standard
• LM70 up to 100,000 hours
• 9 different mounting options
ACCIAIO-SWET/IP66 • (4’)
• 304 stainless steel monocoque housing
• Removable lamp & ballast tray
• Ships lamped & includes a 72” cord
• 3mm tempered glass lens
SPYDER® MINIINDOOR/WET/IP67 • ( 2’, 4’, 6’ )
• 3500K, 4100K & 5700K standard
• 4.8W per linear foot
• 56.95 lumens per watt
• IP67
FTZ COMBOWET/IP66
• Heavy duty die-cast construction
• Wall, ceiling or end mounting
• Impact resistant polycarbonate cover
• MR16 lamps
FOOD PROCESSING
Food processing facilities have a very specific set of demands. Due to the variety of spaces, different types of lighting solutions need to be applied accordingly. Cold storage, splash zones or warehousing spaces should be fitted with a product that meets their safety, durability, and lighting needs.
These areas may consist of:
• Smoke• Oil• Dust• Streaming water
• Pressured wash downs • Cleaning or chemical solutions• Extreme temperatures
QUESTIONS YOU SHOULD ASK:• Does the luminaire have the required certifications for the environment?• Will the luminaires be hosed down? If “yes” with what PSI?• Are any controls / sensors needed in this environment?
LIGHTING NEEDS:• NSF or equivalent certification is required• Wash down environments are common• Controls and sensors are often times used
BS100WET/IP66 • (2’, 4’)
• 100% polycarbonate
• Tool-less assembly
• Silicone perimeter gasketing
• 9 different mounting options
Note: Key features shown here, for full list of features and benefits please see the product specification sheets.
9
REFRIGERATION I INDUSTRIAL
BS100LEDWET/IP66 • (2’, 4’)
• 100% polycarbonate construction
• 3500K, 4100K & 5700K standard
• LM70 up to 100,000 hours
• 9 different mounting options
ACCIAIO WET/IP66 • ( 2’, 4’ )
• 24 gauge steel housing
• Ships lamped & includes a 72” cord
• Removable lamp & ballast tray
• 2 & 4 lamp configurations
SPYDER® NUANCEINDOOR/IP66
• 12”, 18”, 24”, 30”, 36” & 48”
• Adjustable 90 degree mounting
• 4100K standard
• Fixed, adjustable and magnetic mount options
WLXNI-CD • WET/NEMA 4X • FIBERGLASS
• Internal heater option
• Polycarbonate lens & fiberglass housing
• Low profile double face version
• Custom wording available
EDTNEMA 4X/DAMP
• High capacity allows for remote loads
• Durable fiberglass enclosure
• Internal heater
• Top or side mounted heads
BRAVADOWET/NEMA 4X/IP66
• Heavy duty die-cast construction
• Up to 70’ on center spacing
• Designed for wall or ceiling installation
• Internal heater
QUESTIONS YOU SHOULD ASK:• Does the luminaire have the required certifications for the environment?• Will the luminaires be hosed down? If “yes” with what PSI?• Are any controls / sensors needed in this environment?
QUESTIONS YOU SHOULD ASK:• What is the minimum operating temperature of the luminaire?• Does the luminaire have the appropriate ratings for this environment?• Is emergency operation needed?
LIGHTING NEEDS:• Cold temperature operation is required • On/Off sensors often times used• Wash down environments are common
BS100WET/IP66 • (2’, 4’)
• 100% polycarbonate
• Tool-less assembly
• Silicone perimeter gasketing
• 9 different mounting options
BS101LEDWET/IP65 • (4’)
• 100% polycarbonate construction
• 48W
• 3500K, 4100K & 5700K standard
• Linear Ambient Luminaires: Direct
10
INDUSTRIAL I PARKING DECKS
Note: Key features shown here, for full list of features and benefits please see the product specification sheets.
EVRVANDAL RESISTANT
• 14 gauge steel construction
• Impact resistant polycarbonate shield
• Tamper resistant stainless steel hardware
• Full length canopy for ceiling or end mount
TEMPESTAWET/IP66
• Removable hood for higher light output
• Autotest diagnostics standard
• 1350 lumens of emergency illumination
• Surface, recessed concrete, drywall or t-bar mount
FTZ PLUS WET/IP66
• Heavy duty die-cast construction
• Impact resistant polycarbonate cover
• Low profile design
• Universal mounting configurations
FTZ COMBOWET/IP66
• Heavy duty die-cast construction
• Wall, ceiling or end mounting
• Impact resistant polycarbonate cover
• MR16 lamps
BS101LEDWET/IP65 • (4’)
• 100% polycarbonate construction
• 50W
• 3500K, 4100K & 5700K standard
• Linear Ambient Luminaires: Direct
QUESTIONS YOU SHOULD ASK:• Will this area require hose down cleaning?• Should I use sensors in a parking deck?• What mounting options do I have that can optimize performance?
LIGHTING NEEDS:• Reducing maintenance time is important• Proper lighting when occupied is required• Wet location luminaires are ideal for parking decks
BS100WET/IP66 • (2’, 4’)
• 100% polycarbonate
• Tool-less assembly
• Silicone perimeter gasketing
• 9 different mounting options
BS100LEDWET/IP66 • (2’, 4’)
• 100% polycarbonate construction
• 3500K, 4100K & 5700K standard
• LM70 up to 100,000 hours
• 9 different mounting options
Note: Key features shown here, for full list of features and benefits please see the product specification sheets.
11
WAREHOUSE I INDUSTRIAL
ECCO LUNAWET/IP65
• Surface, wall or ceiling mounting
• Impact resistant design
• 100% polycarbonate construction
• Protected lamp heads ensure positioning
STXINDOOR
• Custom wording available
• Slide in face plates for easy maintenance
• Universal mounting
• Durable 20 gauge steel construction
BS241INDOOR DAMP • FLUORESCENT
• Low profile, high performance
• 20 gauge steel housing
• High output reflector
• Surface, pendant or chain mounting
EST OR HWEINDOOR
• 20 gauge steel housing
• PAR36, PAR18 or MR16 heads
• Remote capable
• Up to 260W capacity in Pb-A & 200W in Ni-Cd
QUESTIONS YOU SHOULD ASK:• What is the rated lamp life?• Are sensors available and easily adjusted?• Do multi-lamp fixtures offer energy savings?
LIGHTING NEEDS:• Occupancy sensors to lower energy costs• Long lamp life to reduce maintenance• Proper distribution to evenly illuminate
BS240WET/IP65 • FLUORESCENT
• Stainless steel hardware is standard
• Surface, pendant or chain mounting
• Energy savings multi lamp design
• 4 or 6 biax lamp versions are available
GRAN BELLAINDOOR
• 4100K & 5700K available
• 125W & 175W models
• 92.3Lp/W
• 6 & 8 lamp CF offered
12
INDUSTRIAL I HAZARDOUS AREAS
Note: Key features shown here, for full list of features and benefits please see the product specification sheets.
HZ960 ( 2’ )
WET/IP66
• Durable 20 gauge steel housing
• 10 year paint finish warranty
• Tempered glass diffuser
• Fully adjustable for accurate positioning
HZ920SHAZARDOUS/WET/IP66 • (2’, 4’)
• 304 type stainless steel housing
• Safety coated tempered glass lens
• Lamped and ready to install
• Class I, Div 2, Grps A,C,D
HZ940HAZARDOUS/ WET/IP66 • (4’)
• 24 gauge steel housing
• Ships lamped & includes a 72” cord
• Dual removable ballast trays
• Class I, Div 2, Grps A,C,D
ROBUSTOHAZARDOUS
• Emergency, Exit and Combo offered
• Durable fiberglass construction
• Class I, Div 2, Grps A-D: T2B
• Class I, Zone 2, IIA, IIB & IIC: T1 & T2
HDZPB-A, NI-CD • HAZARDOUS
• Copper free construction
• Multiple configurations offered
• Designed for the harshest environments
• Class I,II,III, Div 1&2, All Grps
BRAVADOHAZARDOUS/WET/NEMA 4X/IP66
• Heavy duty die-cast construction
• Up to 70’ on center spacing
• Class I, Div 2, Grps A,B,C,D
• Class II, Div 1 & 2, Grps E,F,G
QUESTIONS YOU SHOULD ASK:• Does the product have the correct certifications for this application?• What is the products warranty?• Is the product maintenance friendly?
LIGHTING NEEDS:• Know the exact type of environment the luminaires are going into• Special classifications may be required• Expect longer delivery times for hazardous rated products
HZ100 HAZARDOUS/WET/IP66 • (2’, 4’)
• 100% polycarbonate construction
• Simple tool-less assembly
• Light weight design (6.5 lbs)
• Class 1, Div 2, Grps A-D • Approved
14
COMMERCIAL I RETAIL
Note: Key features shown here, for full list of features and benefits please see the product specification sheets.
SPYDER® MINIINDOOR/WET/IP67 • ( 2’, 4’, 6’ )
• 3500K, 4100K 5700K & RGB offered
• 4.8W per linear foot
• Fully adjustable for accurate positioning
• Easy to install
QUESTIONS YOU SHOULD ASK:• Does my luminaire meet the light level requirements?• Is maintenance ease an important factor?• Does this application require a specific light source?
LIGHTING NEEDS:• Know what light levels you need• Understand the hours of operations required• Aesthetics play a major role in the lighting design
SPYDER®
INDOOR/WET/IP67 • (2’, 4’, 8’)
• 3500K, 4100K, 5700K & RGB offered
• Fully adjustable for proper positioning
• Less than 6.5W per foot
• 80.38 lumens per watt
GIRA SOLE SPOTWET/IP65
• 3500K, 4100K, 5700K and RGB
• Canopy or stake mount
• Optics for multiple distribution patterns
• Indoor and outdoor applications
PLANEXINDOOR • (2’ X 2’)
• 3000K, 4100K & 5700K available
• 0-10V dimming is standard
• Low profile design
• LM70 rated for 50,000 hours
SIRIUSINDOOR/DAMP • (4’) • T8, T5, T5HO
• Linear run configuration offered
• Direct / indirect light source
• Tool free maintenance
• Multiple reflector options
DRACOINDOOR • (12”, 16”)
• 3500K, 4100K, 5700K & RGB LED
• 34W LED system
• Custom housing and refractor colors
• 1, 2, 3 or 4 lamp CF offered
SPYDER® NUANCEINDOOR/IP66
• 12”, 18”, 24”, 30”, 36” & 48”
• Adjustable 90 degree mounting
• 4100K standard
• Fixed, adjustable and magnetic mount options
Note: Key features shown here, for full list of features and benefits please see the product specification sheets.
15
RETAIL I COMMERCIAL
CYCLONE OVALINDOOR
• Compact extruded aluminum housing
• Pivot system allows wall or ceiling mount
• Field installable chevrons
• Custom housing colors available
FORMAINDOOR/DAMP
• Durable die-cast construction
• Universal mounting
• Curved, flat or open face designs
• Custom wording available
CURVAINDOOR/DAMP
• Surface or recess mount offered
• Field adjustable chevrons
• Autotest diagnostics is standard
• Housing pivots for wall, ceiling, slope mount
MEZZOWET/IP66
• Durable die-cast aluminum housing
• Autotest diagnostics standard
• Photocell standard on AC & ACEM models
• Multiple housing colors offered
BREZZAINDOOR/DAMP
• Compact combination design
• Directional LED strip for EM egress
• Universal mounting configurations
• Field adjustable chevrons
TEMPESTAWET/IP66
• Low profile design
• Autotest diagnostics standard
• 1350 lumens of emergency illumination
• Surface, recessed concrete, drywall or t-bar mount
16
COMMERCIAL I HOSPITALITY
Note: Key features shown here, for full list of features and benefits please see the product specification sheets.
QUESTIONS YOU SHOULD ASK:• What is the expected lamp life?• How does the luminaire mount / install?• What energy savings features are offered?
LIGHTING NEEDS:• Proper light levels are important in specific areas• Energy savings and lamp life is focused on• Ease of maintenance is important
SPYDER® NUANCEINDOOR/IP66
• 12”, 18”, 24”, 30”, 36” & 48”
• Adjustable 90 degree mounting
• 4100K standard
• Fixed, adjustable and magnetic mount options
DRACOINDOOR • (12”, 16”)
• 3500K, 4100K, 5700K & RGB LED
• 34W LED system
• Custom housing and refractor colors
• 1, 2, 3 or 4 lamp CF offered
SCALAWET/IP66 • STAIRLIGHT • (2’)
• Designed to meet stairwell requirements
• 3500K, 4100K & 5700K
• Multiple mounting options
• Dimming, Emergency and Occupancy Sensing
GIRA SOLEWET/IP65
• LM70 rated for 85,000 hours
• Multiple distribution optics offered
• Stainless steel & custom plates available
• 3500K, 4100K, 5700K, single color & RGB
SPYDER® MINIINDOOR/WET/IP67 • ( 2’, 4’, 6’ )
• 3500K, 4100K, 5700K & RGB standard
• 4.8W per linear foot
• 56.95 lumens per watt
• Compact design
GIRA SOLE SPOTWET/IP65
• 3500K, 4100K, 5700K and RGB
• Canopy or stake mount
• Optics for multiple distribution patterns
• Indoor and outdoor applications
PLANEXINDOOR • (2’ X 2’)
• 3000K, 4100K & 5700K available
• 0-10V dimming is standard
• Low profile design
• LM70 rated for 50,000 hours
Note: Key features shown here, for full list of features and benefits please see the product specification sheets.
17
HOSPITALITY I COMMERCIAL
OL2INDOOR
• Reduced size die-cast trim plate
• Field adjustable chevrons
• Quick connect installation
• Custom wording available
AESTETICAINDOOR/DAMP/IP40
• Designed for wall or ceiling mount
• Low profile, compact design
• Design requires no optical aiming
• Nickel Cadmium battery standard
CURVAINDOOR/DAMP
• Surface or recess mount offered
• Autotest diagnostics is standard
• Field adjustable chevrons
• Housing pivots for wall, ceiling, slope mount
HOSPITALITY NEEDS
• Visually Appealing
• Easy installation
• Low maintenance
• Longevity
• Mounting Options
18
COMMERCIAL I EDUCATION
Note: Key features shown here, for full list of features and benefits please see the product specification sheets.
BS240WET/IP65 • FLUORESCENT
• Stainless steel hardware is standard
• Surface, pendant or chain mounting
• Energy savings multi lamp design
• 4 or 6 biax lamp versions are available
QUESTIONS YOU SHOULD ASK:• Is the luminaire vandal resistant?• How does the luminaire mount / install?• What energy savings features are offered?
LIGHTING NEEDS:• Durability is critical in school environments• Light level requirements must be reached• Ease of maintenance is very important
LUCE TLINDOOR/DAMP
• Integral or remote emergency operation
• Operates multiple lamp types
• Range of lumen performance available
• Transforms normal lighting into emergency lighting
BS100LEDWET/IP66 • (2’, 4’)
• 100% polycarbonate construction
• 3500K, 4100K & 5700K standard
• LM70 up to 100,000 hours
• 9 different mounting options
BS241INDOOR DAMP • FLUORESCENT
• Low profile, high performance
• 20 gauge steel housing
• High output reflector
• Surface, pendant or chain mounting
PLANEXINDOOR • (2’ X 2’)
• 3000K, 4100K & 5700K available
• 0-10V dimming is standard
• Low profile design
• LM70 rated for 50,000 hours
LEADERINDOOR • (4’)
• Surface, Cable or Pendant mount
• Direct or Direct / Indirect illumination
• Stand alone or linear run configuration
• Two lamp T5 and T5HO
GRAN BELLAINDOOR
• 4100K & 5700K available
• 125W & 175W models
• 92.3Lp/W
• 6 & 8 lamp CF offered
Note: Key features shown here, for full list of features and benefits please see the product specification sheets.
19
EDUCATION I COMMERCIAL
FTZ PLUS WET/IP66
• Heavy duty die-cast construction
• Impact resistant polycarbonate cover
• Low profile design
• Tamper resistant hardware
FTZ COMBOWET/IP66
• Heavy duty die-cast construction
• Wall, ceiling or end mounting
• Impact resistant polycarbonate cover
• MR16 lamps
EVRVANDAL RESISTANT
• 14 gauge steel construction
• Impact resistant polycarbonate shield
• Tamper resistant stainless steel hardware
• Full length canopy for ceiling or wall mount
TEMPESTAWET/IP66
• Low profile design
• Autotest diagnostics standard
• 1350 lumens of emergency illumination
• Surface, recessed concrete, drywall or t-bar mount
ECCO LUNAWET/IP65
• Surface, wall or ceiling mounting
• Impact resistant design
• 100% polycarbonate construction
• Multiple lamp options available
FORMAINDOOR/DAMP
• Durable die-cast construction
• Universal mounting
• Curved, flat or open face designs
• Custom wording available
20
COMMERCIAL I OFFICES
Note: Key features shown here, for full list of features and benefits please see the product specification sheets.
PEH-1INDOOR/DAMP
• Compact design & high performance
• LED heads reduce maintenance
• Wall or ceiling surface mounting
• Quick connect installation
PCHINDOOR/DAMP
• Compact combo design
• Universal mounting
• Quick connect installation
• Adjustable, high performance LED heads
PLANEXINDOOR • (2’ X 2’)
• 3000K, 4100K & 5700K available
• 0-10V dimming is standard
• Low profile design
• LM70 rated for 50,000 hours
SIRIUSINDOOR/DAMP • (4’) • T8, T5, T5HO
• Linear run configuration offered
• Direct / indirect light source
• Tool free maintenance
• Multiple reflector options
AESTETICAINDOOR/DAMP/IP40
• Designed for wall or ceiling mount
• Low profile, compact design
• Design requires no optical aiming
• Nickel Cadmium battery standard
SCALAWET/IP66 • STAIRLIGHT • (2’)
• Designed to meet stairwell requirements
• 3500K, 4100K & 5700K
• Multiple mounting options
• Dimming, Emergency and Occupancy Sensing
QUESTIONS YOU SHOULD ASK:• How many hours a day is the office occupied?• Are there areas that are often unused or used only when scheduled?• Who handles the maintenance in the office?
LIGHTING NEEDS:• You must know occupancy time of day and duration• Understand the lighting code requirements• Energy savings in office environments is critical
22
EXTERIOR I LANDSCAPE - SIGNAGE
Note: Key features shown here, for full list of features and benefits please see the product specification sheets.
SPYDER® NUANCEIP66
• 12”, 18”, 24”, 30”, 36” & 48”
• Adjustable 90 degree mounting
• 4100K standard
• Fixed, adjustable and magnetic mount options
GIRA SOLE MINIWET/IP65
• 3500K, 4100K, 5700K and RGB
• In-ground enclosure
• Custom finishes available
• Optics for multiple distribution patterns
GIRA SOLEWET/IP65
• LM70 rated for 85,000 hours
• Multiple distribution optics offered
• Stainless steel & custom plates available
• 3500K, 4100K, 5700K, single color & RGB
BX960 ( 2’ )
WET/IP66
• Durable 20 gauge steel housing
• 10 year paint finish warranty
• Tempered glass diffuser
• Fully adjustable for accurate positioning
QUESTIONS YOU SHOULD ASK:• What is the environment like that the luminaires will be installed in?• Is the luminaire easily accessible?• What light source are you planning on using and why?
LIGHTING NEEDS:• You must know the environment where the product is being installed• Easy maintenance of exterior luminaires is important• Know the hours of operation that the luminaires will be running
Note: Key features shown here, for full list of features and benefits please see the product specification sheets.
23
GIRA SOLE SPOTWET/IP65
• 3500K, 4100K, 5700K and RGB
• Canopy or stake mount
• Optics for multiple distribution patterns
• Indoor and outdoor applications
BS101LEDWET/IP65 • (4’)
• 100% polycarbonate construction
• 48W
• 3500K, 4100K & 5700K standard
• Linear Ambient Luminaires: Direct
SPYDER® MINIWET/IP68 • ( 2’, 4’, 6’ )
• 3500K, 4100K, 5700K & RGB offered
• 4.8W per linear foot
• 56.95 lumens per watt
• IP67
SPYDER®
WET/IP68 • (2’, 4’, 8’)
• 3500K, 4100K, 5700K & RGB offered
• Fully adjustable for proper positioning
• Less than 6.5W per foot
• 80.38 lumens per watt
LANDSCAPE - SIGNAGE I EXTERIOR
QUESTIONS YOU SHOULD ASK:• How easily accessible are the luminaires?• What is the required light output?• How many hours a day will the luminaire be on?
LIGHTING NEEDS:• Make sure you understand the requirements for sign lighting• Outdoor luminaire ratings are very important• Environmental testing such as temp. and vibration are critical
KEY JOBS
OCEAN CENTER:DAYTONA BEACH, FL
Product: Gira Sole
GOOGLE: SAN FRANCISCO, CAProduct: Gran Bella, BS100
WALMART PROJECTProduct: Draco, Spyder® and BS100LED
26
SOLAR I PRONTO SOLE 15 & 30
26
Application: Parks, pathways, docks, carports, decks, public areas.Real World Use: Operate lights, cameras, motion sensors, pumps and timers.
Simplicity: Charge controller, battery and panel.
Remote Lighting with the Pronto Sole 15/30:Designed specifically to power lighting needs ranging from 15W to 30W for 12 hours a day.
Ideal for use with LED illumination. Pronto Sole 15/30 will provide the solution with the power you need.
RECOMMENDED BEGHELLI LUMINAIRES
BS100LED SOLARCustom design for Solar
Applications in a familiar package
GIRA SOLE MINI Ideal for Path, Architectural and
Landscape Lighting
SPYDER® & SPYDER® MINI Linear LED lighting
for signage.
27
Pronto Sole Bus Stop Kit 10 & 30:The Pronto Sole Bus Stop kits are designed to bring safety and information sharing to your bus stops. Ideal for illuminating the waiting area using LED’s. The Pronto Sole Bus Stop Kit 30 will produce close to 2000 lumens for sign lighting or illuminating larger areas.
The ability to customize the lighting schedule of these kits, allows us to build cost effective systems aligned with your local needs, including, motion sensing, short nights and security requirements.
Durability: Specifically designed components, enclosures and hardware for tough environments.Custom: Ability to meet your design needs, including schedule timers, motion sensors and security features.
Product Life: Warranties range from 5 - 25 years.
Signage Lighting:Spyder 7.2W per footSpyder MINI 4.8W per foot
Operating ProfilesDusk to DawnDusk to MidnightDusk to MidnightPre-Sunrise Alarm
Down Lighting:Gira Sole Spot6.5W Each
RECOMMENDED BEGHELLI LUMINAIRES
PRONTO SOLE BUS STOP KIT I SOLAR
28
The Pronto Sole 600 at Riviera Isles:The Riviera Isles project used a custom PRONTO SOLE 600 kit to illuminate a remotely located sign in a cost effective manner.
Custom Pronto Sole 600 kit included:(2) 4 foot Beghelli SPYDER MINI(2) 30W LED spotsThis custom Pronto Sole 600 provides 120W of illumination for 12 hours a day.
Lighting:The Pronto Sole Custom line can power any 120VAC/12-24VDC light.
A Pronto Sole Custom system can be as large as is needed - or as low profile as desired.
Request a design quote from a Beghelli engineer.
RECOMMENDED BEGHELLI LIGHTING FIXTURES
Project: Beghelli engineers will design the best solution based on your unique needs.Quality: Research, innovation, communication and service have lead Beghelli to provide the highest of quality components in the market.
Reliability: Battery warranty up to 13+ years, Security installations back up of 10+ days, System design lives of 10+ years.
SOLAR I PRONTO SOLE CUSTOM
29
The Pronto Sole Lifestyle?If you’re connected - we will help you monetize your sunlight.
Beghelli’s experience with greater than 1,000 installations totalling more than 20MW. This level of involvement allows us to understand the most important design elements. No project is too small or too large.
Endless Possibilities: Power ratings from 2kW to 2MW, off grid/on grid, grid/generator switches, full system design and installation.Designed for Your World: Maximize ROI, local solar resource analysis, custom financial projections.
A True Partner: Beghelli’s 35 year history has prepared us for your 25 year future.
PRONTO SOLE LIFESTYLE I SOLAR
30
SOLAR I PRONTO SOLE SITE & AREA
BEGHELLI’S PRONTO SOLE SITE & AREA
Fully integrated solar street lighting, pathway and bollards. These pre-engineered systems are robust and independently powered. They have been designed specifically to meet the demanding requirements of lighting professionals.
PRONTO SOLE LED BOLLARD
The PLB series contemporary bol-lard features a durable polycarbon-ate construction, high quality light output and effortless installation.
Choose the WLB series when you need wayfinding, marking, or space delineating lighting. With the same high quality light output and clean look.
PRONTO SOLE STREET LIGHT
The Pronto Sole Street Lighting kit comes in three sizes - 38W, 68W and 108W. The kit integrates the battery and control system into the solar module. Two cables connect directly to the luminaire for a quick installation.
With a pole mount height between 20’ & 40’ the Pronto Sole Street Light can be used to light wide pathways, parking lots and streets.
www.beghelliusa.com
www.beghelliusa.com/luce
www.beghelliplanetsun.com
BEGHELLI USA
3250 CORPORATE WAY • MIRAMAR, FL 33025 • P: 800.726.4316 • P: 954.442.6600 • F: 954.442.6677© 2013-2014 BEGHELLI USA, ALL RIGHTS RESERVED
041114