BEETLE /Fusion Compact · - During the thunderstorm, data transmission lines must not be connected or disconnected. - Only use accessories and extension components that have been

BEETLE /Fusion Compact Operating Manual

The reproduction, transmission or use of this document or its contents is not permitted without express authority. Offenders will be liable for damages.

All rights, including rights created by patent grant or registration of a utility model or design, are reserved.

Delivery subject to availability; technical modifications possible.

Copyright© Wincor Nixdorf International GmbH, 2009

BEETLE /Fusion Compact Operating Manual Edition Mar 2010

Contents

BEETLE /Fusion Compact – Operating Manual 01750171533 F

Contents

Manufacturer’s Certification......................................................1 Tested Safety ...........................................................................1 FCC-Class A Declaration .........................................................2 BSMI (EMC for Taiwan) ...........................................................2 Symbols used in this guide.......................................................3 Important Safety Precautions...................................................4 Care of the BEETLE /Fusion ....................................................5 Repairs .....................................................................................5

Overview......................................................................................6 Configurations ..........................................................................6 Fusion Compact Peripherals ....................................................8 Front view.................................................................................9 Rear View...............................................................................10

Basic Operation ........................................................................11 Switching on/off device...........................................................12 Brightness and contrast adjustment .......................................13 Rotating and tilting Display.....................................................14

Touch screen ............................................................................16 How to Operate ......................................................................16 Cleaning Instructions..............................................................16

Printer ........................................................................................18 Overview ................................................................................18 Operator Control Panel ..........................................................19 Self Test Printout....................................................................21 Paper Roll Exchange..............................................................22

Contents

BEETLE /Fusion Compact – Operating Manual 01750171533 F

Clearing paper cutter jam.......................................................23 Paper Near End Sensor Adjustment ......................................24

Keyboard ...................................................................................25 General...................................................................................25 Keypad ...................................................................................27 Key switch ..............................................................................27 LEDs.......................................................................................28 Swipecard reader (SCR) ........................................................29

Slim DVD/ CD R/W ....................................................................31

Appendix ...................................................................................32 Technical Data .......................................................................32 AC Power Adapter..................................................................33 Power Cord Selection.............................................................34 System configuration..............................................................35 I/O connection ports ...............................................................37 Total Available Power of External I/O Ports ...........................38 Approved Printer List..............................................................39

Manufacturer’s Certification

01750171533 F BEETLE /Fusion Compact – Operating Manual 1


The device complies with the requirements of the 2004/108/EC (EMC Directive) and 2006/95/EC (Low Voltage Directive).

Therefore, you will find the CE mark on the device or packaging.

Tested Safety

The BEETLE /Fusion has been provided with the symbol for “Tested Safety”.

In addition, the device has received the UL symbol and cUL symbol.


01750171533 F BEETLE /Fusion – Operating Manual 2

FCC-Class A Declaration This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not in-stalled and used in accordance with the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at own expense.

Le présent appareil numérique ne génère pas de bruits radioélectriques dépassant les limites applicable aux appareils numériques de la “Class A” prescrites dans le Règlement sur le brouillage radioélectrique édicté par le ministère des Communications du Canada.

BSMI (EMC for Taiwan)

The device complies with the requirements of the BSMI (Bureau of Standards, Metrology and Inspection, Ministry of Economic Affairs) directive CNS14348 with regard to “Electromagnetic compatibility” with the limits for a Class B product.

Introduction


Introduction

This operating manual provides all the information required for the operation of BEETLE /Fusion Compact.

Having studied the operating manual, you will be able to properly operate the system.

Symbols used in this guide - Text following this mark represents an item in a list.

“ “ Text in quotation marks contains references to other chapters or sections in this document.

● Paragraphs following this symbol are actions to be

performed in the specific order.

Texts following this symbol are actions to be performed in order to avoid damage or injury.

This symbol identifies paragraphs which contain general notes to facilitate use of the device and help avoid operating errors.

! WARNING

NOTE

Introduction


Important Safety Precautions

Please read the following notes carefully before doing any work on the device.

This device complies with the relevant safety regulations for information processing equipment.

- Note the warning and information labels on the device. - The device is equipped with a safety-tested power cable, which must be

connected only to a grounded outlet. - Ensure that the correct power cord with safety approval is used (see

chapter “Appendix”, is as specified in the “Power Cord Selection”).

- Always hold the plug when removing the power cable. Never pull the cable itself.

- Install cables in such a way that they will not be damaged or crushed in

any way. - Have damaged power cables replaced immediately.

- The lithium battery must be disposed of in accordance with local

regulations for special waste.

- If the display element is damaged and the liquid crystal solution leaks out onto your hands or clothing, please wash your hands or clothing immediately under running water for at least 15 minutes, using soap or alcohol. If the liquid comes into contact with your eyes, consult a medical doctor immediately.

- Make sure that there is always free access to sockets used or to the

electrical circuit-breakers of the house installation. - In case of an emergency (e.g. damaged cabinets, control or power

cables, liquids or foreign objects in the device), switch off the device immediately and inform the customer service responsible for you.

! WARNING

Introduction


- During the thunderstorm, data transmission lines must not be connected or disconnected.

- Only use accessories and extension components that have been

approved by us. Nonobservance can result in damage to the system or violations of regulations concerning safety, radio interference and agronomical requirements.

Care of the BEETLE /Fusion

Clean your BEETLE /Fusion at regular intervals with a moist cloth. Make sure that the power plug is disconnected, connector cables are un-plugged and that no liquid finds its way into the device.

Repairs

Repair work may only be carried out by authorized personnel. Unauthorized opening of the device or repair work carried out improperly not

only could result in considerable danger to the user but also cancel all the warranty and liability agreements.

In case of noncompliance, Wincor Nixdorf International GmbH excludes all liability.

! WARNING

! WARNING

Overview


Overview

The Beetle /Fusion Compact system is designed for indoor installation.

“BEETLE /Fusion Compact is not for office use”

Configurations

The configuration of the Fusion may comprise of the following components:

- Panel PC processor options: Intel Celeron M 1.0GHz Intel Celeron M 1.5GHz Intel Celeron Dual Core, T3100 1.9GHz Intel Core 2 Duo, P8400 2.26GHz

- Min. 512MB RAM (up to 2GB RAM)

- Primary mass storage options:

40GB 2.5” hard disk (min.) 8GB SSD

- Secondary mass storage (optional):

Slim DVD/CD rewritable 40GB 2.5” hard disk (min)

- 12” LCD display options:

Non Touch Capacitive Touch Resistive Touch

- NVRAM (optional)

- Thermal printer paper width options: 58mm +0, -0.5mm

NOTE

Overview


80mm +0, -0.5mm

- Keyswitch, 6 positions

- 7 x 12 key-matrix keyboard

- Magnetic Swipe Reader (optional): 3-track ISO JIS (Track 1&2, JIS Type II)

Overview


Fusion Compact Peripherals

Cash drawer Scanner Scale

Overview


Front view

Panel PC 12.1”

Printer (TH230 USB)

Key-switch

84 matrix keyboard MSR

Slim DVD/ CDROM

Stereo speakers

Overview


Rear View

Basic Operation


Basic Operation

The BEETLE /Fusion Compact system is easy to operate.

To start operating the device, follow the steps listed below. Step 1 Connect power adapter to BEETLE /Fusion system as shown. Step 2 Switch on the main power. Step 3 Wait for the system to fully boot up before operation.

Basic Operation


Switching on/off device

Switch on the AC main after the power cord is plugged into the AC outlet socket.

Press ON/OFF button located at the bottom right corner of the display unit

to power-up the unit (see picture below).

E:

In the event that the system does not start up, switch off the system. Switch off the power to the system completely by disconnecting the power

cord from the AC main outlet.

Check all connectors to ensure that there are no loose connections before switching on the system again. This may be due to the poor handling of the system resulting in the loose connection.

If the problem persists, switch off the system and disconnect the power

cord from the AC outlet. Contact the Technical Support for assistance.

ON/OFF button button

! CAUTION

Basic Operation


Brightness and contrast adjustment

The buttons for the brightness adjustment are located at the bottom right corner of the display unit (see picture below).

Press the ‘Arrow Up’ or ‘Arrow Down’ buttons to adjust the brightness

until the appropriate adjustment is acceptable by the user.

Brightness adjustment buttons

Basic Operation


Rotating and tilting Display

The display unit can be rotated 30o to the left and 90o to the right.

Basic Operation


The display unit can be tilted between 20o to 55o.

Touch screen


Touch screen

How to Operate Touching the touch screen has the same effect as clicking the left mouse button. Depending on the selected touch screen option, the user experience with touch is different. For capacitive touch it responds to very light touch, and only touch using bare finger is possible. As for resistive touch it requires slightly harder touch to get a response, and the screen does react in any way if touched, for example, with a stylus. The recommended material for a stylus is polyacetal. The stylus should have a minimum spherical radius of 0.8 mm and contain no sharp edges or burrs that may cause damage to the topsheet.

Cleaning Instructions Always turn off the system before cleaning! To ensure that water does not get to the printer and keyboard base whilst cleaning, cover them with a plastic sheet. For Capacitive Touch: The glass surface of your Touch Screen should be cleaned with a mild, abrasive free, commercially available glass cleaning product. All pH neutral materials (pH 6 to 8) are good for cleaning. Cleaning with water and isopropyl alcohol is possible as well. Use a soft, fine-meshed cloth to clean the surface. Dampen the cloth slightly and then clean the screen.

Touch Screen


For Resistive Touch: The surface of your Touch Screen should be cleaned with a water-based solvent or a non-abrasive cleaner. Do not use solvents containing acetic acid or methylene chloride. Use a soft, fine-meshed cloth to clean the surface. Dampen the cloth slightly and then clean the screen. A wrong maintenance may cause damages to the screen, which are not covered by guarantee or warranty.

Printer


Printer

The Fusion Compact system is equipped with a thermal receipt printer.

Overview

Printer cover

Paper output

Operator panel

Printer


Operator Control Panel

FEED

If you push this button once and release it, the printer feeds paper for one line (1/6 inch).

If you push this button and hold it down, the printer feeds the paper as long as the button is not released.

The button can be locked by the application software and then will be without function.

LEDs indicator

All LED off: power is not stable Green POWER LED on: power is stable Green POWER LED blinking: printing speed may be low if necessary contact your technical support

FEED

POWER

PAPER

ERROR

OPEN

Access cover for cutter-jam recovery

Printer


PAPER Yellow PAPER LED off: Paper is properly inserted. Yellow PAPER LED on: Paper roll near end. Yellow PAPER and red ERROR on: Paper end is reached.

ERROR

Red ERROR LED off: normal condition Red ERROR LED on: not ready for operating. Printer cover is not closed or in combination with Yellow PAPER LED on, paper end is reached Red ERROR LED blinking: an error has occurred. Switch the printer off by terminating all applications & shutting down the Operating System and then switch off the system and followed by switching on the system again. In case of no success contact your technical support.

LED overview

POWER PAPER ERROR Meaning Green Yellow Red

Off Off Off No power Operation On Power on blinking Off If necessary call for technical

support

Paper On Paper properly inserted On Paper near end On On Paper end

Error Blinking If necessary call for technical support

On Cover not closed

OPEN

Press this button to unlock and open the cover.

Printer


Self Test Printout Terminate all applications & shut down the System. Press and hold the printer line FEED button whilst powering up the

System. A service menu will be printed.

Press the FEED button two times shortly to select the self test. Press the

same button for more than one second to start the printout. Press the FEED button one time shortly and one time for more than one

second to end the self test.

Printer


Paper Roll Exchange For a paper roll exchange follow the steps below: Turn the display 90 degrees to the right. Open the printer cover by pressing the open button. Remove the (nearly) empty paper roll and any residual paper. If necessary clean the print head and the rubber roller. Unwind the outer layer (winding) of the paper roll. Be sure there is no glue

residual on the roll. Insert the paper roll. Lay the un-winded paper over the front edge of the

printer. Hold down the paper and close the printer cover. Press on the middle of

the cover until it audibly and distinctly locks into place. Turn the display back to original position.

Documents

BEETLE /Fusion Compact · - During the thunderstorm, data transmission lines must not be connected or disconnected. - Only use accessories and extension components that have been