TWIN OVER TWIN END LADDER BUNK BED

Bedz King BK906EL-Drawers

LEFT RIGHT

Thank you for purchasing your Furniture from Bedz King.

Every effort has been made to ensure your Furniture is of the finest quality. If you have any questions, please do not hesitate to contact us at info@bedzking.com

page 1 of 12 (JULY 2018)

READ THESE INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE THIS BED

SAFETY WARNINGS AND GENERAL NOTES

Follow the information on the warning labels on the upper bunk bed structure and on the carton. Do not remove warning label from the bed.

Always use the recommended size mattress or mattress support, or both, to help prevent the likelihood of entrapment or falls.

The top surfaces of the mattress must be at least 5" below the upper edge of the guardrails.

Do not allow children under 6 years of age to use the upper bunk.

Prohibit more than one person on the upper bunk.

Periodically check and ensure that the guardrails, ladder and other components are in their proper position, free from damage, and that all connectors are tight.

Do not allow horseplay on or under the bed. Always prohibit jumping on the bed.

Always use the ladder for entering and leaving the upper bunk.

Do not use substitute parts. Contact the manufacturer or dealer for replacement parts.

Use of a night-light may provide added safety for a child using the upper bunk.

If the bunk bed will be placed next to the wall, the guardrail that runs the full length of the bed should be placed against the wall to prevent entrapment between the bed and the wall.

Always use guardrails on both long sides of the upper bunk.

The use of a water or sleep floatation mattress is prohibited.

Keep these instructions for future reference.

We recommend assembling your bunk bed on the shipping carton to protect your floor or carpet. Be certain all staples are out of the box before beginning assembly on the shipping carton.

Strangulation Hazard Never attach or hang items to any part of the bunk bed that are not designed for use with the bed for example, but not limited to hooks, belts, and jump ropes.

page 2 of 12 (July/2018)

WARNING Pursuant to the Consumer Product Safety Improvement Act (CPSIA) Sec. 102 the manufacturer certifies compliance with the Consumer

Product Safety Commission (CPSC) regulations listed below.

**** Product Information **** **** Safety Testing Information ****

Testing performed at one or more of the following independent testing locations: BUNK BED - BK 161 (Stairway) / BK 161EL (End Ladder)

Diversified Testing Laboratories Inc Armstrong Forensic Laboratory Date of Manufacture: 336 West Front Street 330 Loch'n Green Trail

P.O. Box 4004 Arlington, TX 76012 Burlington, NC 27215

Manufactured by: Custodian of Test Records: Bedz King LLC Manager of Compliance and Testing

Made in Brazil

Date Testing Location Regulation 816 111th Street Bedz King LLC January - April 2014 Armstrong 15 U.S.C. § 1278a Arlington, TX 76011 816 111th Street November 2014 Armstrong 16 CFR 1303

Arlington, TX 76011 March 2014 Diversified ASTM F 1427-13 Children's Product Certificates avaliable at www.bedzking.com/certificates March 2014 Diversified 16 CFR 1213 and 16 CFR 1513

To help prevent serious or fatal injuries from entrapment or falls: - Use guardrails on both sides of upper bunk - Never allow a child under 6 years on upper bunk. - Prohibit horseplay on or under bed (s). - Use only ma�ress which is 74" - 75" long and 37 1/2" - 38 1/2" - Prohibit more than one person on upper bunk. wide on upper bunk. - Use ladder for entering and leaving upper bunk. - Use only ma�ress which is 74" - 75" long and 37 1/2" - 38 1/2" - STRANGULATION HAZARD - Never attach or hang wide on lower bunk. items to any part of the bunk bed that are not designed - Ensure thickness of ma�ress and founda�on combined does not for use with the bed, for example, but not limited to exceed 9" and ma�ress is at least 5" below upper edge of guardrails. hooks, belts and jump ropes.

DO NOT REMOVE THIS LABEL

13 12 01

12 06

14 04

15

12 13

12 07

10 09 04

08 11 02

04 01 03 03

02 04 01

05 28x

page 3 of 12 (July/2018)

WARNING - CHOKING HAZARD To be Assembled by Adults only!

Small parts can be a choking hazard for children

SCREWS ARE SHOWN IN ACTUAL SIZE Qty. Extra

A5 3,5x16

12

A10 3,5x30

74

B1 7,0x100

16 +2

B5 1/4"

24 +2

B30 1/4"x120

24 +2

C3 10x40

51 +2

C5 15x90

4

D13 2

G4 space block 2

G8 1

page 4 of 12 (July/2018)

C3 01 C3

C3

C3C3

C3

12 4x

C3C3

C3

04

4x

C3 C3

C3 C3 08

01

3x C3

C3

C3

C3 - 50x

09

C3C3

C3 C3

02

G8+B30

02

G8+B1

B5 2x

01 B5

03 B1+G8

B5 B30+G8

B30

G8

G8 - 01x B5 - 04x B1 - 04x B30 - 04x page 5 of 12 (July/2018)

03

04

A10

G4 A10 A10

A10

A10

A10 A10 A10

A10 A10

A10 05 14x A10

A10

A10

A10 A10

space block

A10 - 28x G4 - 02x page 6 of 12 (July/2018)

B5

B5

B5 B5 B30+G8

B5 B30+G8 04 B5

B5 04

G8+B30 G8+B30

B5

AB30 G8+B30 G8+B30

C

G8

B5 - 08x B30 - 08x G8 - 01x

B1

G8

05

06

B30 - 04xG8 - 01x B5 - 04x B1 - 04x

06WARNING

DO NOT REMOVE THIS LABEL

To help prevent serious or fatal injuries

from entrapment or falls:Use only mattress which is 74!-75! long and

37-38 ! wide on upper bunk.

1/2!1/2Ensure thickness of mattress and foundation

combined does not exceed 9! and mattress is

at least 5! below upper edge of guardrails.

Never allow a child under 6 years on upper bunk.

Use guardrails on both sides of upper bunk.

Prohibit horseplay on or under bed(s).

Prohibit more than one person on upper bunk.

Use ladder for entering and leaving upper bunk.

STRANGULATION HAZARD - Never attach or hang

items to any part of the bunk bed that are not designed

for use with the bed,for example, but not limited to

hooks, belts, and jump ropes.

2224 Commerce DriveArlington, Texas 76011Item #BK 901 PO 5810

Month/Year of Mfg.: November /2011

Bedz King LLC.

MADE IN BRAZILCERTIFICATION LABEL

This bunk bed model has been tested by

an independent laboratory and is in

compliance with ASTMF -1427 Standard

Consumer Safety Specification For Bunk

Beds and the Government Code of

Federal Regulations 1213 and 1513

01

07

11

0809

10

page 7 of 12 (July/2018)

A

C

B30

G8

B5

B5

04

04

12

12

12

12

G8+B30G8+B30

!

!

G8+B1G8+B1

B30+G8B30+G8

B1+G8

B1+G8

B1+G8

B5B5

B5B5

B30 - 08xG8 - 01x B5 - 08x B1 - 08x

G8+B30G8+B30

G8+B1G8+B1

G8+B30

G8+B1

G8+B1G8+B30

B5

B5

B30+G8

B1+G8

B1+G8

B30+G8

B5

B5

B5

07

15

A5

D13 A5

A5

A5

A5 - 12x D13 - 02x 15 A5

08

G4 A10 A10

A10

A10

A10

A10 A10

A10

A10

05 14x A10 A10 A10

A10

A10

A10

space block

A10 - 28x G4 - 02x page 8 of 12 (July/2018)

09

A10

A10 C5

C5

A10 A10

C5 A10

A10

C5 A10

A10 - 08x C5 - 04x

10

A10 13 A10

A10

13

A10

A10

A10 13

A10

A10 - 06x page 9 of 12 (July/2018)

11- Option LEFT 14

14

C3 A10

A10 A10

A10

A10 - 04x

C3 - 01x

page 10 of 12 (November/2018)

11 - Option RIGHT

14 14

C3

A10 A10

A10 A10

A10 - 04x

C3 - 01x

page 11 of 12 (November/2018)

BEDDING SPECIFICATION

- Always use the recommended size mattress or mattress support or both, to help prevent the likelihood of entrapment or falls. - All Bedz King bunk beds are supplied with a complete slat kit, so there is no need for a foundation or bunkie board.

BED MATTRESS SPECIFICATIONS

Upper Bunk: Only use a mattress that is 74" - 75" long and 37 1/2" - 38 1/2" wide on the upper bunk. - Ensure thickness of mattress and foundation combined does not exceed 9".

Lower Bunk: Only use a mattress that is 74" - 75" long and 37 1/2" - 38 1/2" wide on the lower bunk.

REPLACEMENT PARTS

- Replacement parts, including additional guardrails may be obtained by contacting Bedz King LLC at info@bedzking.com - Guard rails are not available for the lower bunk. This bunk bed is not designed or certified to have guard rails installed on the lower bunk.

ASSEMBLY TIPS

- Power tools are not recommended for assembling your furniture. - Give yourself plenty of room to work. - Due to the size of this bunkbed, it must be assembled within the space it will occupy. - The assembly will require at least two people to complete. - Make sure all the fasteners are tight. - Take your time and read the instructions carefully.

page 12 of 12 (July/2018)

Ｅｘｑｎ＃Ｅｈｇ＃Ｈｑｇ＃Ｏｄｇｇｈｕ＃Ｅｈｇ｝＃Ｎｌｑｊ＃ＥＮ；９

Ｗｋｄｑｎ＃｜ｒｘ＃ｉｒｕ＃ｓｘｕｆｋｄｖｌｑｊ＃｜ｒｘｕ＃Ｉｘｕｑｌｗｘｕｈ＃ｉｕｒｐ＃Ｅｈｇ｝＃Ｎｌｑｊ１＃

Ｈｙｈｕ｜＃ｈｉｉｒｕｗ＃ｋｄｖ＃ｅｈｈｑ＃ｐｄｇｈ＃ｗｒ＃ｈｑｖｘｕｈ＃｜ｒｘｕ＃Ｉｘｕｑｌｗｘｕｈ＃ｌｖ＃ｒｉ＃ｗｋｈ＃ｉｌｑｈｖｗ＃ｔｘｄｏｌｗ｜１＃Ｌｉ＃｜ｒｘ＃ｋｄｙｈ＃ｄｑ｜＃ｔｘｈｖｗｌｒｑｖ／＃ｓｏｈｄｖｈ＃ｇｒ＃ｑｒｗ＃ｋｈｖｌｗｄｗｈ＃ｗｒ＃ｆｒｑｗｄｆｗ＃ｘｖ＃ｄｗ＃ｌｑｉｒＣｅｈｇ｝ｎｌｑｊ１ｆｒｐ＃

ｓｄｊｈ＃４＃ｒｉ＃ 7＃＋ JULY 2018)

READTHESE INSTRUCTIONS CAREFULLYBEFORE ATTEMPTINGTOASSEMBLETHIS BED

SAFETYWARNINGSAND GENERALNOTES

Follow the information on the warning labels on the upper bunk bed structure and on the carton. Do not remove warning label from the bed.

Always use the recommended size mattress or mattress support, or both, to help prevent the likelihood of entrapment or falls.

The top surfaces of the mattress must be at least 5"below the upper edge of the guardrails.

Do not allow children under 6 years of age to use the upper bunk.

Prohibit more than one person on the upper bunk.

Periodically check and ensure that the guardrails, ladder and other components are in their proper position, free from damage, and that all connectors are tight.

Do not allow horseplay on or under the bed.Always prohibit jumping on the bed.

Always use the ladder for entering and leaving the upper bunk.

Do not use substitute parts. Contact the manufacturer or dealer for replacement parts.

Use of a night-light may provide added safety for a child using the upper bunk.

If the bunk bed will be placed next to the wall, the guardrail that runs the full length of the bed should be placed against the wall to prevent entrapment between the bed and the wall.

Always use guardrails on both long sides of the upper bunk.

The use of a water or sleep floatation mattress is prohibited.

Keep these instructions for future reference.

We recommend assembling your bunk bed on the shipping carton to protect your floor or carpet. Be certain all staples are out of the box before beginning assembly on the shipping carton.

Strangulation Hazard Never attach or hang items to any part of the bunk bed that are not designed for use with the bed for example, but not limited to hooks, belts, and jump ropes.

page 2 of 7 (July/2018)

SCREWS ARE SHOWN IN ACTUAL SIZE Qty. Extra

A10

A22

B8

C3

3,5x30

4,0x16

7,0x50

10x40

8

4

8

8

+1

+1

D14 4

G8 1

G9 4

page 3 of 7 (July/2018)

01

C3

C3

C3

C3 - 08x

02

G8+B8

G8+B8

G8+B8

B8+G8

G8+B8

B8+G8

B8+G8

B8+G8

B8

G8

B8 - 08x G8 - 01x

page 4 of 7 (July/2018)

03

A10A10 D14

A10A10 D14

A10A10 D14

A10A10

D14

A10 D14 A10

G9

G9

G9

G9

G9

A10 - 08x

page 5 of 7 (July/2018)

D14 - 04x G9 - 04x

04

A22

A22 A22

A22 A22

A22 - 04x

page 6 of 7 (July/2018)

BEDDING SPECIFICATION

- Always use the recommended size mattress or mattress support or both, to help prevent the likelihood of entrapment or falls. - All Bedz King bunk beds are supplied with a complete slat kit, so there is no need for a foundation or bunkie board.

BED MATTRESS SPECIFICATIONS

TWIN OVER TWIN Upper Bunk: Only use a mattress that is 74" - 75" long and 37 1/2" - 38 1/2" wide on the upper bunk. - Ensure thickness of mattress and foundation combined does not exceed 9". Lower Bunk: Only use a mattress that is 74" - 75" long and 37 1/2" - 38 1/2" wide on the lower bunk.

TWIN OVER FULL Upper Bunk: Only use a mattress that is 74" - 75" long and 37 1/2" - 38 1/2" wide on the upper bunk. - Ensure thickness of mattress and foundation combined does not exceed 9". Lower Bunk: Only use a mattress that is 74" - 75" long and 52 1/2" - 53 1/2" wide on the lower bunk.

FULL OVER FULL Upper Bunk: Only use a mattress that is 74" - 75" long and 52 1/2" - 53 1/2" wide on the upper bunk. - Ensure thickness of mattress and foundation combined does not exceed 9". Lower Bunk: Only use a mattress that is 74" - 75" long and 52 1/2" - 53 1/2" wide on the lower bunk.

REPLACEMENT PARTS

- Replacement parts, including additional guardrails may be obtained by contacting Bedz King LLC at info@bedzking.com - Guard rails are not available for the lower bunk. This bunk bed is not designed or certified to have guard rails installed on the lower bunk.

ASSEMBLY TIPS

- Power tools are not recommended for assembling your furniture. - Give yourself plenty of room to work. - Due to the size of this bunkbed, it must be assembled within the space it will occupy. - The assembly will require at least two people to complete. - Make sure all the fasteners are tight. - Take your time and read the instructions carefully.

page 7 of 7 (July/2018)

＃

Ｘｑｇｈｕ＃Ｅｈｇ＃Ｇｕｄｚｈｕｖ＃Ｅｈｇ｝＃Ｎｌｑｊ＃ＥＮ７３

Ｗｋｄｑｎ＃｜ｒｘ＃ｉｒｕ＃ｓｘｕｆｋｄｖｌｑｊ＃｜ｒｘｕ＃Ｉｘｕｑｌｗｘｕｈ＃ｉｕｒｐ＃Ｅｈｇ｝＃Ｎｌｑｊ１＃

Ｈｙｈｕ｜＃ｈｉｉｒｕｗ＃ｋｄｖ＃ｅｈｈｑ＃ｐｄｇｈ＃ｗｒ＃ｈｑｖｘｕｈ＃｜ｒｘｕ＃Ｉｘｕｑｌｗｘｕｈ＃ｌｖ＃ｒｉ＃ｗｋｈ＃ｉｌｑｈｖｗ＃ｔｘｄｏｌｗ｜１＃Ｌｉ＃｜ｒｘ＃ｋｄｙｈ＃ｄｑ｜＃ｔｘｈｖｗｌｒｑｖ／＃ｓｏｈｄｖｈ＃ｇｒ＃ｑｒｗ＃ｋｈｖｌｗｄｗｈ＃ｗｒ＃ｆｒｑｗｄｆｗ＃ｘｖ＃ｄｗ＃ｌｑｉｒＣｅｈｇ｝ｎｌｑｊ１ｆｒｐ＃

ｓｄｊｈ＃４＃ｒｉ＃６＃＋ NOV 2017，＃

4 2

5

6

5 3 1

2x

SCREWS ARE SHOWN IN ACTUAL SIZE Qty. Extra

A19 26 4,0x30

A24 36 3,5x12

C1 28 +1 8x30

D20 2

E12 8

A24 01 A24 A24 E12 E12

A24 3 A24

2X E12

A24

AC1

C1A C1 A24

E12 C1 C1 4 A24 A24 C1

E12

C1 2 A24 C1

C1 6 A24 - 32x

C1 C1 C1

C1 - 28x E12 - 08x page 2 of 3 (NOV/2017)

02

A19

A19 A19

2

3

6

2X

A19

A19 A19

4

A19 - 12x

03

5

5

2X

04 05

2X A24

2X A19 A19

D20 A24

A19

A19

A19 A19 A19

A19 - 12x A19 - 02x A24 - 02x D20 - 02x

page 3 of 3 (NOV/2017)