Upload
others
View
7
Download
0
Embed Size (px)
Citation preview
Toxic Substances Hydrology Program Bedrock Topography of Western Cape Cod, Massachusetts, Based on Bedrock Altitudes from Geologic Borings and Analysis of Ambient Seismic Noise by the Horizontal-to-Vertical Spectral- Ratio Method
By Gillian M. Fairchild, John W. Lane, Jr., Emily B. Voytek, and Denis R. LeBlanc
AshumetPond
-180
-140 -130
-130
-170
-140
-180
-190
-150
-150
-150
-170
-160
-160
-170
-180
-160
-150
-120
-120 -140
-190
-190
-170
-200
-180 -210-220
-160
-150
-160-170
-230-240
-180
-170-150
-160-140
-190
-120
-130
-200
-170
-210
-160
-140-180
-170
-140-130
-150
-180-170
-190
-190
-210
-230-1
90
-150
-140-160-1
70
-170
-150
-170
-230
-220 -2
10
-200
-260-190 -180
-170
-200
-220
-230
-240
-190
-210
-130
-180
-160
-190
-210-220
-250-260
-250-240-230
Prepared in cooperation with the Army National Guard and the Air Force Center for Engineering and the Environment
Scientific Investigations Map 3233
U.S. Department of the InteriorU.S. Geological Survey
U.S. Department of the InteriorKEN SALAZAR, Secretary
U.S. Geological SurveyMarcia K. McNutt, Director
U.S. Geological Survey, Reston, Virginia: 2013
For more information on the USGS—the Federal source for science about the Earth, its natural and living resources, natural hazards, and the environment, visit http://www.usgs.gov or call 1–888–ASK–USGS.
For an overview of USGS information products, including maps, imagery, and publications, visit http://www.usgs.gov/pubprod
To order this and other USGS information products, visit http://store.usgs.gov
Any use of trade, product, or firm names is for descriptive purposes only and does not imply endorsement by the U.S. Government.
Although this report is in the public domain, permission must be secured from the individual copyright owners to reproduce any copyrighted materials contained within this report.
Suggested citation:Fairchild, G.M., Lane, J.W., Jr., Voytek, E.B., and LeBlanc, D.R., 2013, Bedrock topography of western Cape Cod, Massachusetts, based on bedrock altitudes from geologic borings and analysis of ambient seismic noise by the horizontal-to-vertical spectral-ratio method: U.S. Geological Survey Scientific Investigations Map 3233, 1 sheet, maps variously scaled, 17-p. pamphlet, on one CD–ROM. (Also available at http://pubs.usgs.gov/sim/3233.)
iii
Contents
Introduction.....................................................................................................................................................1Study Design and Data Collection ..............................................................................................................3
Boring Logs and Seismic Refraction Surveys ..................................................................................3Analysis of Ambient Seismic Noise by the Horizontal-to-Vertical Spectral-Ratio Method .....3Description of Data Sets .....................................................................................................................6
Bedrock Topography of Western Cape Cod, Massachusetts ................................................................6Interpretation of Bedrock-Surface Topography ..............................................................................6Comparison to Earlier Maps of the Bedrock Topography ............................................................12
Summary........................................................................................................................................................12References Cited..........................................................................................................................................12Appendix........................................................................................................................................................15
Figures 1. Map showing location of study area near the Massachusetts Military Reservation,
western Cape Cod, Massachusetts ...........................................................................................2 2. Closeup photographs showing A, a single broadband, three-component
seismometer, and B, the seismometer and data-collection system as typically deployed in the field .....................................................................................................................4
3. Example from site 00MW0584 of the graphical representation of the raw seismic data ...................................................................................................................................5
4. Example of the Geopsy output graph of the fundamental resonance frequency determined by the spectral plot of the ratio of the averaged-horizontal to vertical components of the ambient seismic noise at site 00MW0584 ..............................................7
5. Topographic map of the bedrock surface beneath western Cape Cod as interpreted from horizontal-to-vertical spectral-ratio measurements, seismic refraction surveys, and geologic borings, western Cape Cod, Massachusetts ................8
6. Topographic map of the bedrock surface beneath the area near Snake Pond as interpreted mostly from geologic borings, western Cape Cod, Massachusetts ................9
7. Topographic map of the bedrock surface beneath the area near Ashumet Pond as interpreted mostly from geologic borings, western Cape Cod, Massachusetts ..............10
8. Topographic map of the bedrock surface beneath Cape Cod, Martha’s Vineyard, and Nantucket, Massachusetts ..............................................................................................11
iv
Conversion Factors and Datum
Multiply By To obtain
Length
foot (ft) 0.3048 meter (m)mile (mi) 1.609 kilometer (km)
Volume
gallon (gal) 3.785 liter (L)
Vertical coordinate information is referenced to the National Geodetic Vertical Datum of 1929 (NGVD 29).
Horizontal coordinate information is referenced to the North American Datum of 1927 (NAD 27) and the North American Datum of 1983 (NAD 83).
Altitude, as used in this report, refers to distance above the vertical datum.
List of Abbreviations
AFCEE Air Force Center for Engineering and the Environment (April 2007–present) Air Force Center for Environmental Excellence (prior to April 2007)
ARNG Army National GuardGPS global positioning systemHVSR horizontal-to-vertical spectral ratioMMR Massachusetts Military ReservationUSGS U.S. Geological Survey
Bedrock Topography of Western Cape Cod, Massachusetts, Based on Bedrock Altitudes from Geologic Borings and Analysis of Ambient Seismic Noise by the Horizontal-to-Vertical Spectral-Ratio Method
By Gillian M. Fairchild, John W. Lane, Jr., Emily B. Voytek, and Denis R. LeBlanc
IntroductionThe bedrock surface of western Cape Cod defines the
lower boundary of groundwater models that are used to predict the transport of groundwater contaminants originating on the Massachusetts Military Reservation (MMR). The bedrock surface is represented by a no-flow boundary in the models, and the topography of the surface plays an important role in determining the patterns of groundwater flow. The bedrock surface has been characterized in the past by using the results of seismic refraction surveys and geologic borings drilled to bedrock (Oldale, 1969; Air Force Center for Environmental Excellence (AFCEE), 2006). The horizontal-to-vertical spectral-ratio (HVSR) method, which is a passive seismic technique that uses an analysis of the horizontal and vertical components of ambient seismic noise (microtremors), has been introduced as a method to collect data on the depth to bedrock in a manner that is noninvasive and less expensive than drilling (Lane and others, 2008). These advantages are beneficial in an area such as western Cape Cod, where the land is occupied by residential and commercial properties, and depths to bedrock commonly exceed 200 feet (ft). The Toxic Substances Hydrology Program of the U.S. Geological Survey (USGS), working cooperatively with the Army National Guard (ARNG) and the Air Force Center for Engineering and the Environment (AFCEE), used the HVSR method during 2008–10 to estimate bedrock depth in areas for which there was little information from drilling and to prepare a map of the altitude of the bedrock surface for western Cape Cod.
The purpose of this report is to present an updated topographic map of the bedrock surface beneath western Cape Cod, Massachusetts, for use in groundwater-flow models of the Sagamore lens of the Cape Cod aquifer. The bedrock surface was first mapped by Oldale in 1969, and the map was updated in 2006 by using bedrock altitudes estimated during the drilling by AFCEE and ARNG to identify the boundaries and sources of the contaminant plumes originating
on the MMR (AFCEE, 2006). The borings are concentrated on the MMR and in the immediately surrounding area. This report updates the bedrock-surface map with new data points collected by using the HVSR method as well as data from additional borings drilled to bedrock since the 2006 map was prepared.
The area of the map presented in this report is on western Cape Cod (fig. 1) and includes the towns of Bourne (as far west as the Cape Cod Canal), Mashpee, Falmouth, and Sandwich, and the western portion of the town of Barnstable. The MMR covers the northwestern part of this area (fig. 1). The study area overlies unconsolidated glacial drift deposits that consist of medium-to-coarse-grained glaciofluvial sand and gravel outwash overlying fine-to-medium-grained glaciolacustrine sand and silt, with sandy moraines near the northern and western coasts. These deposits form the Sagamore lens of the Cape Cod aquifer, which underlies the entire area (Walter and Whealan, 2005). The underlying bedrock is primarily granodiorite (Oldale and Barlow, 1986; Oldale, 1992). The surficial topography of the study area is characterized by gently sloping areas on the outwash plains and hummocky terrain on the moraines.
The aquifer, which consists of the unconsolidated glacial sediments, is an unconfined system that is surrounded by saltwater. The water table in the unconfined glacial sediments reaches a maximum altitude of approximately 70 ft at the eastern boundary of the MMR (Walter and Whealan, 2005). Several contaminant plumes originate on the MMR from historical defense-related activities (Massachusetts National Guard, 2012). The direction of movement of each contaminant plume depends on the position of the source of the contamination on the groundwater mound. Groundwater modeling has been used extensively to assist in predicting the fate and transport of the various contaminants originating on the MMR (AFCEE, 2006; Masterson and others, 1996; Walter and Masterson, 2003; Walter and LeBlanc, 2008).
2 Bedrock Topography of Western Cape Cod, Massachusetts
AshumetPond
SnakePond
BUZZ
ARD
S BA
Y
CAPE CODBAY
VINEYARD SOUND NANTUCKET SOUND
CAPE
COD
CAN
AL
ATLANTICOCEAN
U.S. Geological Survey digital dataUniversal Transverse Mercator projectionZone 19, 1:24,000, 1991; State plane coordinatesystem datum is the North American Datumof 1983 (NAD 83) in meters
SANDWICH
MASHPEE
BOURNE
FALMOUTH
BARN
STABL
E
5 MILES
KILOMETERS5
0
0
41°42'30"
41°32'30"
70°27'30"
Massachusetts
MilitaryReservation
41°30'
42°30'
73°100,000
950,000
850,000
270,000
835,000
815,000
280,000
200,00071°
0
0
50
50
MILES
KILOMETERS
MASSACHUSETTS
CAPE COD
70°37'30"
Figure 1. Location of study area near the Massachusetts Military Reservation, western Cape Cod, Massachusetts.
Study Design and Data Collection 3
Study Design and Data CollectionThis effort included the compilation of geologic boring
and seismic refraction survey data and the collection and analysis of the HVSR data for areas with little or no bedrock information. The HVSR method was applied at a total of 164 sites on and near the MMR.
Boring Logs and Seismic Refraction Surveys
Geologic borings were drilled on and near the MMR in an effort to characterize the contaminant plumes originating on the MMR and obtain data on the hydrogeologic framework of the aquifer. The locations of 559 borings reported to have hit bedrock in the area are shown in figure 1–1 (appendix). These sites are concentrated near the contaminant plumes caused by chemical spills, fuel spills, leachate from landfills, and firing ranges used for artillery and small-arms practice (Massachusetts National Guard, 2012). The lithologic log and driller’s report for each of these locations were checked, and an estimated altitude of the bedrock surface was calculated from the reported depth to bedrock and land-surface altitude. A set of 463 additional borings that were drilled to at least 200 feet below land surface but reportedly did not hit bedrock was also compiled (figure 1–1 in appendix). The boring logs were obtained from the environmental databases maintained by AFCEE and ARNG.
Three seismic refraction surveys were done in Falmouth in 1958 (Oldale and Tuttle, 1964). These inline refraction traverses were made with a 12-channel portable refraction amplifier and oscillograph. Each survey was 1,100 feet long. These surveys recorded signals that are characteristic of geologic settings where unconsolidated sedimentary deposits overlie crystalline bedrock. Additional seismic refraction surveys were conducted on western Cape Cod in 1968 (Oldale, 1969). Based on the data collected in each of these surveys, the average depth to bedrock was calculated over the length of the survey line.
Analysis of Ambient Seismic Noise by the Horizontal-to-Vertical Spectral-Ratio Method
The HVSR method is based on a relationship between the resonance frequency of ambient seismic noise as measured at land surface and the thickness of the unconsolidated sediments that overlie consolidated bedrock. A spectral analysis of the ambient seismic noise from the earth’s surface is used to determine the fundamental resonance frequency for the measurement site. Ambient seismic noise is composed of microtremors caused by ocean waves, wind, rainfall, and anthropogenic activities such as traffic and industry (Ibs-von Seht and Wohlenberg, 1999). The HVSR method works best at locations where the subsurface can be approximated by a two-layer model consisting of a layer of generally homogeneous,
unconsolidated sediments overlying a consolidated bedrock layer. The HVSR method is effective in areas where there is a strong contrast in acoustic impedance between the sediment and bedrock (Lane and others, 2008; more detailed descriptions in Nakamura (1989) and Geopsy (2011)). Cape Cod’s geologic structure, with unconsolidated glacial sediments on top of granitic bedrock, produces a very distinct contrast in acoustic impedance at the sediment-bedrock interface; this structure makes Cape Cod an ideal setting in which to apply the HVSR method.
At each measurement site, a single, broadband, three-component seismometer was used to record ambient seismic noise from the earth’s surface. The seismometer was placed directly on the ground or on a metal plate with spikes (fig. 2A). The spikes on the bottom of seismometer or the metal plate were firmly driven into the ground to ensure that the seismometer was coupled well with the earth. A bullseye spirit level and north arrow built into the instrument and an external compass were used to level the instrument and align it with magnetic north. The seismometer was then connected to a laptop computer, a global positioning system (used for timing only), and a battery. The seismometer was covered with a weighted 5-gallon bucket to reduce interference from wind and weather (fig. 2B). Data collection was initiated by using the program Scream! (Guralp Systems, 2011) on the laptop computer. Data were collected for no less than 30 minutes at each location. To minimize noise, the equipment was set up approximately 30 feet from traffic when possible and where pedestrians, including those collecting the data, were not walking in the immediate area around the equipment; these disturbances would have created excessive noise that later would have had to be removed from the record.
The raw seismic data were processed by using the program Geopsy version 2.7.0 (Geopsy, 2011). An example from site 00MW0584 of the graphical representation, produced by the Geopsy program, of the raw seismic data is shown in figure 3. The horizontal scale represents time, and the vertical scale represents the amplitudes of the data collected for seismic components in three perpendicular directions: vertical (Z), north-south (N), and east-west (E). The raw data were divided into time intervals 60 seconds long that overlap adjacent intervals by 30 seconds each. The small spikes in amplitude above the generally smooth traces were caused by high-amplitude noise disturbances such as the nearby passage of individual vehicles or pedestrians as data were being recorded. Data from these time intervals, which are not colored in figure 3, were removed prior to further data processing.
The fundamental resonance frequency at each site was determined by a spectral analysis of the horizontal and vertical components of the recorded ambient seismic noise. The amplitudes of the spectra of the vertical and two horizontal components of the microtremors for each of the 60-second time intervals were calculated by the Geopsy program. The average of the amplitudes of the horizontal components was divided by the vertical component, and this ratio (the
4 Bedrock Topography of Western Cape Cod, Massachusetts
B
A
Seismometer under bucket
GPS
Battery
Computer
Figure 2. Closeup photographs showing A, a single broadband, three-component seismometer, and B, the seismometer and data-collection system as typically deployed in the field.
Study Design and Data Collection 5
60 s
econ
ds
Nor
th-S
outh
East
-Wes
t
Verti
cal
Figu
re 3
. Ex
ampl
e fro
m s
ite 0
0MW
0584
of t
he g
raph
ical
repr
esen
tatio
n of
the
raw
sei
smic
dat
a. S
ite lo
catio
n sh
own
in fi
gure
5.
6 Bedrock Topography of Western Cape Cod, Massachusetts
HVSR) was plotted as a function of frequency. The graphical output from the Geopsy software is shown in figure 4 for the example from site 00MW0584. Each colored line is the result of this analysis of the data from the 60-second time interval delineated by the similarly colored vertical band in figure 3. For this study, the processing parameters, which are defined and explained in detail in Geopsy (2011), included Konno and Ohmachi (1998) smoothing with a constant bandwidth of 40, a cosine taper width of 5 percent, and a squared average for the horizontal components. An average HVSR spectral plot and spectral plots representing upper and lower limits of one standard deviation were calculated from the plots for the individual time intervals (fig. 4). The fundamental resonance frequency for the site is the frequency defined by the peak in the average HVSR plot. For the example from site 00MW0584, the peak is located at a frequency of 1.06 Hertz (fig. 4). The Geopsy program automatically selects the peak in the processed data and determines the average resonance frequency and its standard deviation (fig. 4). The user also can manually select the peak if the peak selected by the program is unsatisfactory.
The depth to bedrock (or thickness of the unconsolidated sediments composing the top layer of the two-layer model) can be estimated from the fundamental resonance frequency by using the following relationship:
Z f= ab
r0 , (1)
where Z is the sediment thickness in ft, fr0 is the fundamental resonance frequency
in Hertz (s-1), and a (in ft•s) and b (dimensionless) are determined empirically from a nonlinear regression of data acquired at sites where Z is known from adjacent boreholes (Lane and others, 2008).
The constants a and b for this study (a = 297 ft•s and b = -1) were developed by Lane and others (U.S. Geological Survey, written commun., 2011) from a regression analysis of known bedrock depths from borings versus depths obtained by the HVSR method at 8 sites in this study area and 29 additional sites on the glacial deposits of eastern Cape Cod and southeastern mainland Massachusetts. The 8 sites from this study area that were used to develop the empirical equation are highlighted in bold in tables 1–1 and 1–2 (appendix). The estimated depth to bedrock for the example from site 00MW0584 is 279 ft. The altitude of the bedrock surface was obtained by subtracting the estimated depth to bedrock from the land-surface altitude. At site 00MW0584, where the land-surface altitude is 50 ft above NGVD 29, the resulting bedrock-surface altitude is 229 ft below NGVD 29.
A total of 164 sites were chosen for application of the HVSR method from areas for which little bedrock information from geologic borings and the seismic refraction surveys had been collected. These areas generally are near the coast
in Bourne, Sandwich, Falmouth, Mashpee, and along the eastern edge of the map area in Barnstable. Sites with known land-surface altitudes were selected to allow the calculation of bedrock altitude from the estimated depth to bedrock. The HVSR data were collected during 2008–10 by several different seismometers. The measurements were repeated eight times at the Ashumet Pond public boat launch (site 164 on fig. 1–1, appendix) and 15 times adjacent to building 1146 (site 163 on fig. 1–1, appendix) on the MMR. Analysis of these repeated measurements was used to confirm that the instruments were collecting spatially and temporally consistent, comparable data.
Description of Data Sets
Several datasets were used to prepare the updated topographic map of the bedrock surface in this report. Data from sites where the bedrock surface was hit during drilling are given in table 1–1 (appendix). Seismic refraction data are documented in the reports by Oldale and Tuttle (1964) and Oldale (1969). Data from the HVSR method are given in table 1–2 (appendix). Finally, data on the maximum possible bedrock altitude at 463 sites where geologic borings were drilled to at least 200 ft below land surface but reportedly did not hit bedrock are given in table 1–3 (appendix). The locations of the borings and HVSR measurement sites are shown in figure 1–1 (appendix).
Bedrock Topography of Western Cape Cod, Massachusetts
A topographic map of the bedrock surface beneath western Cape Cod was prepared by using data from the geologic borings, seismic refraction surveys, and HVSR measurements. The map was prepared by manually contouring the bedrock altitudes estimated from the data-collection methods.
Interpretation of Bedrock-Surface Topography
The bedrock-surface altitudes from the HVSR survey, seismic refraction surveys, and geologic borings that reportedly hit bedrock were plotted on a map of western Cape Cod and hand-contoured with a 25-ft contour interval (fig. 5). This interval is within the range of estimated uncertainty of about 10 percent of the depth to bedrock (20–30 ft) in the bedrock-surface altitudes estimated for much of the area from the HVSR method. Bedrock-surface altitudes in two smaller areas near Snake Pond (fig. 6) and Ashumet Pond (fig. 7) with closely spaced data points were contoured with a 10-ft contour interval. The bedrock-surface altitudes in these two areas were measured mostly from borings; the altitudes from the borings were estimated to have a range of uncertainty of about 5 ft.
Bedrock Topography of Western Cape Cod, Massachusetts 7Ratio of averaged-horizontal to vertical amplitudes (HVSR)
Mea
n
Uppe
r and
low
er li
mits
of
one
sta
ndar
d de
viat
ion
EXPL
AN
ATIO
N
Freq
uenc
y in
Her
tz (H
z)
Peak at 1.06 Hz
Figu
re 4
. Ex
ampl
e of
the
Geop
sy o
utpu
t gra
ph o
f the
fund
amen
tal r
eson
ance
freq
uenc
y de
term
ined
by
the
spec
tral p
lot o
f the
ratio
of t
he a
vera
ged-
horiz
onta
l to
verti
cal
com
pone
nts
of th
e am
bien
t sei
smic
noi
se a
t site
00M
W05
84. S
ite lo
catio
n sh
own
in fi
gure
5.
8 Bedrock Topography of Western Cape Cod, Massachusetts
0 15,000 30,000 FEET
0 4,000 8,000 METERS
850,000 900,000
225,000
300,000
70°30'70°40'
41°45'
41°30'
Cape C
od
Can
al
Base from USGS and MassGIS sources, North American Datum of 1927 (NAD 27) Altitudes relative to the National Geodetic Vertical Datum of 1929 (NGVD 29)
-250
-250
-250
-200
-250
-225
-225-250
-200
-200
-200
-200
-225
-225-225
-200
-200
-200-200
-225
-225
-250
-275
-300-300
-275-250
-250
-275-275-250
-175-200
-175
-275
-175
-175-150
-125
-175
-175-125
-200
-200
-125
-125
-125
-150
-150
-150
-175
-175
-175
-125
-150
-300
-300
-375
-400-425
-425
-325
-325
-325
-375
-350
-350
-350
-350-275
-275
-275
-275
-225
-225
-225
-250
-275
-300
-300
-225
-225
-200
-200
-175
-175
-150-125
-125-150
-175
-125
-125
-150
-175
-175-150
-150 -150
-175-200
-225-250
-250-225
-175
-275-275
-200-150
-125
-175
-200
-150
-125
-150
-150
-100
-75
-275-250-225-200
-400
-375
-200
-225-250
-150
-125
-350
-175
-100-200
-125 -150
-200
-250-200
EXPLANATION
Altitude of bedrock surface
High -50 feet
Low -450 feet
Altitude contours—relative to sea level, interval is 25 feet, datum is NGVD 29Town boundary
Massachusetts Military Reservation boundary
Pond shoreline
Ocean coastline
Location of well 00MW0584 on eastern shore of Johns Pond
00MW0584
SANDWICH
MASHPEE
BOURNE
FALMOUTH
MASSACHUSETTSMILITARY
RESERVATION
Woods Hole
BU
ZZA
RD
S B
AY
CAPE CODBAY
VINEYARD
SOUND
NANTUCKET
SOUND
BARNSTABLE
Figure 5. Topographic map of the bedrock surface beneath western Cape Cod as interpreted from horizontal-to-vertical spectral-ratio measurements, seismic refraction surveys, and geologic borings, western Cape Cod, Massachusetts. Location of map shown in figure 1.
Bedrock Topography of Western Cape Cod, Massachusetts 9
The contours were initially drawn by adhering strictly to the estimated altitudes, but were then adjusted slightly where appropriate within the range of uncertainty described above to smooth the surface near anomalous features based on single
data points. Finally, the contours were checked for consistency with the maximum possible altitudes at the deep borings that did not hit bedrock; the contours required only minimal adjustments during this final check.
862,500 870,000 70°30'70°32'
250,000
260,000
41°43'
41°42'
41°41' Snake Pond
-140-130
-120-1
60
-150
-160
-140
-170
-170
-150
-120
-150
-140
-170
-160
-170
-130
-160
-170
-160
-120-110
-100
-150
-140
-140
-160
-130
-130
-130
-170
-160-170
-150
-140
-150
0 2,000 4,000 FEET
0 500 1,000 METERS
EXPLANATIONAltitude of bedrock surface
High -100 feet
Low -185 feet
Altitude contours—relative to sea level, interval is 10 feet, datum is NGVD 29
Pond shoreline
Figure 6. Topographic map of the bedrock surface beneath the area near Snake Pond as interpreted mostly from geologic borings, western Cape Cod, Massachusetts. Location of map shown in figure 5.
10 Bedrock Topography of Western Cape Cod, Massachusetts
-160
EXPL
AN
ATIO
N
High
-120
feet
Low
-280
feet
02,
000
4,00
0FE
ET
050
01,
000
MET
ERS
Alti
tude
of b
edro
ck s
urfa
ce
Alti
tude
con
tour
s—re
lativ
e to
s
ea le
vel,
inte
rval
is 1
0 fe
et,
d
atum
is N
GVD
29
Pond
sho
relin
e
850,
000
860,
000
70°3
2'70
°34'
230,
000
240,
000
41°4
0'
41°3
8'
Ash
umet
Pond-1
80
-140
-130
-130
-170
-140
-180-1
90
-150
-150
-150
-170
-160
-160
-170
-180
-160
-150
-120
-120
-140
-190
-190
-170
-200
-180
-210
-220
-160
-150
-160 -170 -230-240
-180
-170-150-160
-140
-190-120
-130
-200
-170
-210
-160
-140
-180
-170
-140
-130
-150
-180
-170
-190
-190
-210
-230
-190
-150-140
-160-170
-170
-150
-170
-230-220
-210
-200
-260
-190-180
-170
-200
-220
-230
-240
-190
-210
-130
-180
-160
-190
-210
-220
-250
-260
-250 -2
40-2
30
Figu
re 7
. To
pogr
aphi
c m
ap o
f the
bed
rock
sur
face
ben
eath
the
area
nea
r Ash
umet
Pon
d as
inte
rpre
ted
mos
tly fr
om g
eolo
gic
borin
gs, w
este
rn C
ape
Cod,
M
assa
chus
etts
. Loc
atio
n of
map
sho
wn
in fi
gure
5.
Bedrock Topography of Western Cape Cod, Massachusetts 11
Figure 8. Topographic map of the bedrock surface beneath Cape Cod, Martha’s Vineyard, and Nantucket, Massachusetts (from Oldale, 1969).
12 Bedrock Topography of Western Cape Cod, Massachusetts
Comparison to Earlier Maps of the Bedrock Topography
The interpreted representation of the bedrock surface in figure 5 is similar in its general features to Oldale’s 1969 map (fig. 8) and AFCEE’s 2006 map. In all three maps, the bedrock surface generally slopes downward to the southeast from the Cape Cod Canal toward Nantucket Sound. The maps similarly show lobes of shallower bedrock extending to the east toward Barnstable and to the south toward Woods Hole. The bedrock surface is at least 47 ft below NGVD 29 (sea level) throughout the mapped area and therefore does not crop out at the land surface.
The bedrock surface presented in this report shows more topographic detail than the earlier maps owing to the increase in the quantity of data available for use in drawing the contours. The general trends in altitude shown on the small-scale map (fig. 5) may reflect preglacial drainage patterns in the bedrock surface. The large-scale maps (figs. 6 and 7), however, show a surface whose altitude varies considerably over a small area. The same variability could be characteristic of the entire study area, but more data would be needed to test this hypothesis. Small-scale variations, including closed depressions in the bedrock surface, are consistent with a glacially eroded bedrock surface (B.D. Stone, U.S. Geological Survey, oral commun., 2011).
SummaryThe HVSR method was used successfully to obtain
estimates of the bedrock-surface altitude for western Cape Cod, Massachusetts, in areas for which altitudes from borings drilled to bedrock or from seismic refraction surveys had not been estimated. The HVSR method was effective in determining sediment thickness on Cape Cod owing to the distinct difference in the acoustic impedance between the sediments and the underlying bedrock. The HVSR data for 164 sites were combined with data from 559 borings to bedrock to create a spatially distributed dataset for the study area that was manually contoured to prepare a topographic map of the bedrock surface. The interpreted bedrock surface generally slopes downward to the southeast as was shown on previous maps by Oldale (1969) and AFCEE (2006). The surface also has complex small-scale topography, as was also shown in the AFCEE (2006) map. The updated map reflects the data available through October 2012 from borings to bedrock and better spatial resolution from the HVSR data in areas outside the MMR for which less information on the bedrock altitudes had been collected.
References Cited
Air Force Center for Environmental Excellence (AFCEE), 2006, Massachusetts Military Reservation Plume Response Program, final Chemical Spill-23 wellfield design report: Jacobs Engineering Group, Inc., A4P–J23–35BC06VB–M23–0003, variously paged.
Geopsy, 2011, Geopsy Project: Geopsy, accessed February 24, 2011, at http://www.geopsy.org/.
Guralp Systems, 2011, Scream! Software for Windows and Linux: Guralp Systems, accessed February 24, 2011, at http://www.guralp.com/category/software.
Ibs-von Seht, Malte, and Wohlenberg, Jürgen, 1999, Microtremor measurements used to map thickness of soft sediments: Bulletin of the Seismological Society of America, v. 89, no. 1, p. 250–259.
Konno, Katsuaki, and Ohmachi, Tatsuo, 1998, Ground-motion characteristics estimated from spectral ratio between horizontal and vertical components of microtremor[s]: Bulletin of the Seismological Society of America, v. 88, no. 1, p. 228–241.
Lane, J.W., Jr., White, E.A., Steele, G.V., and Cannia, J.C., 2008, Estimation of bedrock depth using the horizontal-to-vertical (H/V) ambient-noise seismic method, in Symposium on the Application of Geophysics to Engineering and Environmental Problems, April 6–10, 2008, Philadelphia, Penn., Proceedings: Denver, Colo., Environmental and Engineering Geophysical Society, 13 p.
Massachusetts National Guard, 2012, Massachusetts Military Reservation, Cape Cod, Massachusetts—Environmental overview, accessed April 30, 2012, at http://states.ng.mil/sites/MA/MMR/environ-overview.htm.
Masterson, J.P., Walter, D.A., and Savoie, Jennifer, 1996, Use of particle tracking to improve numerical model calibration and to analyze groundwater flow and contaminant migration, Massachusetts Military Reservation, western Cape Cod, Massachusetts: U.S. Geological Survey Water-Supply Paper 2482, 50 p.
Nakamura, Y., 1989, A method for dynamic characteristics estimations of subsurface using microtremors on the ground surface: Quarterly Report, Railway Technical Research Institute, Japan, v. 30, p. 25–33.
References Cited 13
Oldale, R.N., 1969, Seismic investigations on Cape Cod, Martha’s Vineyard, and Nantucket, Massachusetts, and a topographic map of the basement surface from Cape Cod Bay to the Islands, in Geological Survey Research 1969, Chapter B, Scientific notes and summaries of investigations in geology, hydrology, and related fields: U.S. Geological Survey Professional Paper 650–B, p. B122–B127.
Oldale, R.N., and Barlow, R.A., 1986, Geologic map of Cape Cod and the Islands, Massachusetts: U.S. Geological Survey Miscellaneous Investigations Series Map I–1763, 1 sheet, scale 1:100,000.
Oldale, R.N., and Tuttle, C.R., 1964, Seismic investigations on Cape Cod, Massachusetts, article 145 in Geological Survey Research 1963, Short papers in geology and hydrology, Articles 122–172: U.S. Geological Survey Professional Paper 475–D, p. D118–D122.
Oldale, R.N., 1992, Cape Cod and the Islands—The geologic story: Orleans, Mass., Parnassus Imprints, 208 p.
Walter, D.A., and LeBlanc, D.R., 2008, Use of inverse-modeling methods to improve groundwater-model calibration and evaluate model-prediction uncertainty, Camp Edwards, Cape Cod, Massachusetts: U.S. Geological Survey Scientific Investigations Report 2007–5257, 49 p.
Walter, D.A., and Masterson, J.P., 2003, Simulation of advective flow under steady-state and transient recharge conditions, Camp Edwards, Massachusetts Military Reservation, Cape Cod, Massachusetts: U.S. Geological Survey Water-Resources Investigations Report 03–4053, 51 p.
Walter, D.A., and Whealan, A.T., 2005, Simulated water sources and effects of pumping on surface and ground water, Sagamore and Monomoy flow lenses, Cape Cod, Massachusetts: U.S. Geological Survey Scientific Investigations Report 2004–5181, 85 p.
This page has been left blank intentionally.
Appendix
16 Bedrock Topography of Western Cape Cod, Massachusetts
EXPLANATIONB344
94 Horizontal-to-vertical spectral-ratio measurement site—location and identifier (table 1-2)
With PDF viewer software, open layers menu and turn each layer on and off by clicking the eye symbol
M372
Geologic boring that hit bedrock—location and identifier (table 1-1)
Geologic boring that did not hit bedrock—location and identifier (table 1-3)
0 15,000 30,000 FEET
0 4,000 8,000 METERS
MMR boundary
B9B8
B7
B6B5
B4
B2B1
B99B98B97 B96
B94B91
B88B87
B82B81
B80B79
B78B77
B75B74
B68B67
B50
B43
B31
B20B19
B18
B13 B12
B11
B559
B558B557
B556
B550B549
B548B547
B545
B544
B543
B542
B540B539B538
B535
B534
B533B532
B530
B529B528B527
B526B522
B521
B520
B519B517
B511
B509
B504
B503
B500B498
B497
B492
B487
B480
B477B476
B472
B466
B456
B455B454
B450
B449
B447
B444
B443
B437
B427
B425
B424
B423
B420
B419B416
B415B406
B377B376
B364
B361
B356B349
B345
B344
B343
B340
B339
B338
B336
B333
B332
B330B329
B323
B321
B320
B318
B316
B315B313
B310
B308
B300
B296B295B294
B292
B291
B281
B275
B274B268B257
B253
B246
B241
B240B233
B232 B231
B216B204
B203B201B200B199
B192
B188
B186
B185B184
B183
B181
B178
B170B168B166
B164
B158B145
B144B142
B141
B105
M9M8
M7
M6M5
M4
M3M2M1
M99M98
M97
M96M95
M92M91
M90M89M88M87
M84
M83
M81
M78M77
M74
M72M71M70
M56
M55M54
M52
M46
M44
M19M18
M12
M10
M463
M462
M461M460
M459
M458M457
M456
M452M450
M449
M448
M445M444
M443M442
M441
M435
M434M433M431
M427
M426
M423
M421
M416
M409
M395M394
M392M391M390
M388
M379
M372
M371
M365
M363
M362
M361
M360
M359
M356
M355
M352
M346
M342
M341
M339
M337M336
M335M334
M330
M328
M327 M326
M325M324
M314
M274
M262
M255M252
M250
M218M215 M210
M208M203M201
M194M193M185
M151
M150
M148
M145M144
M143
M140
M127
M118
M117M111
M109
98
76
54 3
2
1
99
98
97
96
95
9493
92
91
90
89
88
87
86
85
84
83
82
81
8079
78
77
76
75
74
73
72
71
70
69
68
67
66
65
64
6362
61
60 59
58
57
56
55
54
5352
51
50
4948
47
4645
44
43
4241
39
38
3735
34
33
323130 28
2726
25
24
2322
21
2019
1817
13
11164
163
163
162
161
160
159
158
157
156
155
154
153
152
150149
148
147
146
145
144
143
142
141
140139
138
137136
135134
133
132
131
130
129
128
127126
125124
123122121
119
118
117116
115
114
113
112111
110
108
107
106
105
104
103
102
101
100
850,000 900,00070°30'70°40'
225,000
300,000
41°45'
41°30'
Base from USGS and MassGIS sources, North American Datum of 1927 (NAD 27)Northings and eastings in state plane meters, sites plotted as of October 2012
This map, as layered PDF, manufactured toallow user to turn map layers on and off
Figure 1–1. Locations of geologic borings and horizontal-to-vertical spectral-ratio measurements used to prepare the topographic map of the bedrock surface, western Cape Cod, Massachusetts. (Click here for PDF of fig. 1–1)
Tables 17
Table 1–1. Locations, altitudes of land and bedrock surfaces, and depths below land surface to bedrock for geologic borings where bedrock was hit during drilling, western Cape Cod, Massachusetts. (Click here)
Table 1–2. Locations, altitudes of land surface, estimated altitudes and depths below land surface of the bedrock surface, and fundamental resonance frequencies at locations of horizontal-to-vertical spectral-ratio (HVSR) measurements, western Cape Cod, Massachusetts. (Click here)
Table 1–3. Locations, altitudes of land surface, maximum altitudes of the bedrock surface, and depths below land surface for geologic borings where bedrock was not hit and drilling was extended to at least 200 feet below land surface, western Cape Cod, Massachusetts. (Click here)
This page has been left blank intentionally.