Bearing Repeater Compass

The Bearing Repeater Compass is equipped with a 360° compass

card and a digital display for heading indication. The heading

source – gyro compass, magnetic compass or satellite compass

– is also indicated.

Bearing sights can be easily mounted on the centric adapter. The

reflected 360° dial on the compass card is used for the reflection

into the bearing sight. A fixed 360° scale on the outer ring allows

relative bearings to be taken.

For use on double-end ferries a 180° offset can be added.

Illumination is controlled via push-button. Bearing sights,

bearing brackets and a pelorus stand are available.

• Hinged wire and slit vane for exact bearings

• Index marks for reading the relative bearings on the gradual

scale of the repeater compass

• Glass prism and index wire to read compass bearings on the

gradual scale of the repeater compass

• Mirror for astronomical bearings

• Two hinged tinted filters (black) for direct sun observation

• The bearing sight comes in a protective case for safe-keeping

Bearing Repeater Compass

BEARING SIGHT CP190

Terrestrial and astronomical bearings

• Index marks for reading the relative bearings on the gradual

scale of the repeater compass

• High reading accuracy due to internal optical path

• Mirror for astronomical bearings

• Hinged tinted filter (black) for direct sun observation

• Level indicator for horizontal alignment of the bearing repeater

• Solid design without wires

• The bearing sight is delivered in a protective case for safe-keeping

• Bearing sight with seven times optical magnification

• Ocular with dioptre adjustment

• High quality night optics

• Direct reflecting of compass card into field of view for direct

reading of bearing

• Mirror for astronomical bearings and seven times power

magnification

• Three hinged tinted filters (yellow, grey, black)

• Level indicator for horizontal alignment of the

bearing repeater

• Taking of bearings without use of optics

• Solid design without wires

• The bearing sight is delivered in a protective case for safe-keeping

STANDARD BEARING SIGHT TELESCOPIC BEARING SIGHT

Terrestrial bearing Terrestrial bearing

Astronomical bearing Astronomical bearing

Peilsäule 142 – 117

WERB – DB 17.10.2000

( 18.31")

1292

(50.

86")

Bearing bracket, fixed

WERB – DB 17.10.2000

170

(6.6

9")

ca. 1

500

(ca.

59.

06")

251( 9.88")

246( 9.69")

170

(6.6

9")

ca. 1

500

(ca.

59.

06")

251( 9.88")

254( 10.00")

246( 9.69")

Bearing bracket, adjustable

WERB – DB 17.10.2000

Bearing bracket, adjustable

WERB – DB 17.10.2000

Bearing bracket, fixed

WERB – DB 17.10.2000

Raytheon Anschütz GmbHHeadquartersD-24100 Kiel, GermanyTel +49(0)431-3019-0Fax +49(0)431-3019-291www.raytheon-anschuetz.com

Subject to change due to technical developments without notice. ® If not otherwise stated, all trademarks including Anschütz and are registered by Raytheon Anschütz GmbH

All rights reserved. Printed in GermanyRAN 801.36e / L&S 0416

TECHNICAL DATAReading accuracy

– 0.5° on compass card

– 0.1° on digital display

Supply voltage & power consumption

– 24 V DC (18 – 36 V DC)

– max. 10 W

Signal input

– RS 422 / RS 232C

– NMEA or

– Anschütz course bus

Permissible ambient temperature

– -25° C to +70° C

Type of enclosure acc. to IEC/EN 60529

– IP 56

In accordance with

– EN/IEC 60945

– EN/IEC 61162

Bearing bracket, non adjustable

Weight: 8 kg

Pelorus stand

Weight: 34 kg

Bearing Repeater Compass

Bearing bracket, adjustable

Weight: 13 kg

251

246

254

170

ca. 1

500

( 9.9")

370(14.6")

353(13.9")

185(7.3")

350(13.8")

ca. 55(ca.19.7")28

(1.1")274(10.8")

( 9.7")

( 10")

(6.7

")(c

a. 5

9.1"

)

465

427

1292

(50.

9")

ca. 5

52(c

a. 2

1.7"

)

269

(10.

6")

54(2

.1")

( 18.3")

( 16.8")