Upload
others
View
10
Download
0
Embed Size (px)
Citation preview
BEACONS AND
OPTICAL WARNING SYSTEMS
www.hella.com/municipal
INTRODUCTION
www.hella.com/municipal
02 03 |
CONTENTS
OPTICAL WARNING SYSTEMS PAGE
Optical warning systems - intro 52 – 53
Optical warning systems – overview 54 – 55
OWS 7 modules 56 – 57
OWS 7 technical details 58
OWS 7 accessories and spare parts 59
OWS 7 order guide 60 – 61
OWS 7 configuration examples 62 – 63
OWS optical warning systems 64
OWS – range overview 65
OWS – accessories 66
OWS – spare parts 67
Raptor + 68 – 70
BSN-LED front flasher 71
WORKLIGHTS PAGE
Worklights - intro 72 – 73
LED worklights 74 – 78
Xenon worklights 79
Halogen worklights 80 – 81
Worklights – Isolux diagrams 82 – 83
INTRO PAGE
Quality is a tradition at HELLA 04 – 05
IP protection category 06 – 07
ECE R 10 / ECE R 65 08 – 09
Welcome to the LED age 10 – 11
Light is technology 12 – 13
Online tools 14
Period of use / location of use / recommendation 15
BEACONS PAGE
Beacons - intro 16 – 17
HELLA beacon product finder 18 – 19
Beacons – overview 20 – 21
K-LED 2.0 beacon 22 – 23
Rota LED beacon 24 – 25
KL 7000 LED beacon 26 – 27
KLX 7000 beacon 28 – 29
KLX 5000 beacon 30 – 31
KLX JuniorPlus beacon 32 – 33
KL 7000 beacon 34 – 35
Rotaflex / Rotafix beacon 36 – 37
KL Rota compact beacon 38 – 39
KL 600 / 700 / 710 beacon 40 – 41
KL JuniorPlus beacon 42 – 43
KL 8000 beacon 44
KL 5000 beacon 45
ACCESSORIES AND SPARE PARTS PAGE
For halogen beacons 46 – 49
For xenon beacons 50
For beacons and worklights with pipe-socket attachment 51
QUALITY IS A TRADITION AT HELLA
INTRODUCTION
HELLA has set itself the ambitious standard of guaranteeing
consistently high product quality in every respect.
This is achieved by defining quality criteria and checking every detail using carefully-selected methods throughout the entire manufacturing process. Production quality is ensured by parallel quality monitoring and testing.
Quality products from HELLA are subject to different test procedures in accordance with the HELLA standard 67101. These test procedures are conducted by the HELLA test laboratory in Lippstadt.
HELLA products are subject to the following test:
Splash water testIn universal splash water cabins, HELLA products are tested under realistic environmental conditions. The cabins are equipped with devices for rain, splash water, water jets and water mist. Here, the products are tested for tightness by undergoing the intermittent and splash water test at a pressure of up to 5 bar, and the the jet water test at a pressure of up to 10 bar.(IP XK4K)
High-pressure cleaner testIn one test system, the products are exposed to a water pressure of up to 120 bar and a water temperature of +85 degrees Celsius.
This test simulates cleaning in a carwash or with a pressure cleaner (IP XK9K).
Dust testIn this test, the products are tested for their dust tightness. Unfired Portland cement is used as a test medium for all products. The test is optionally performed in sample function operation, and with overpressure or underpressure exposure of the device under test.
The tests are evaluated by determining the photometric value before and after the test (IP 5K). This is the only way that HELLA can ensure that dust will not penetrate the product and can guarantee the long service life of the product.
First-class quality by conviction
HELLA guarantees the perfect, long-term functioning of its products and stands for satisfied customers in the spare parts, accessories and light sources areas.
As the long-established company from Lippstadt is an efficient partner to the automotive industry, HELLA products are manufactured to meet the respective precision, tolerance specifications. Combined with the use of sophisticated test procedures in the product development, you can depend on HELLA products in any situation.
04 05 |
More information on HELLA quality criteriacan be found under: www.hella.com/quality
Vibration testThis test simulates the behaviour of the products over a "poor stretch of road" and shows, for example, responses to potholes, gravel tracks, gravel, stones, fields and dirt roads. Special ralley profiles are tested for selected products, like for example, auxiliary lights.
The wide band random vibration test is used to test the mechanical endurance strength in the vertical and horizontal axes. Here, the frequency range extends from 10 to 1000 Hertz. Alongside the vibration test, the products are subjected to a temperature overload of -40 degrees Celsius to +80 degrees Celsius. Among others, this checks the ageing process of the plastic. All products are tested for function for up to 24 hours.
Furthermore, a mechanical shock test is conducted during this procedure. This simulates the behaviour in the event of jolts (products in packaging during shipping) with an acceleration of between 300 and 500 metres per second2 squared.
Immersion and pressure tightness testDepending on requirements, this test is carried out for all lighting technology products.
An immersion pipe can be submerged to a depth of 1m in water. Another test system can reach a depth of 6 metres. Also, an overpressure test up to 1.6 bar is conducted in an immersion pool.
All tests are carried out in accordance with the HELLA standard, 67101, as well as the legal requirements (IP 67).
Heat, moisture and cold testIn temperature cycle tests, HELLA products are exposed to temperature fluctuations of -40 degrees Celsius to +100 degrees Celsius in climatic chambers which have a volume of 600 - 1000 litres. In addition, thawing and de-thawing tests up to max. 95% air humidity and up to +80 degrees Celsius are conducted. In the so-called "shock chamber", the temperatures changes within seconds (intervals of max. 6 seconds) between -40 degrees Celsius and +100 degrees Celsius.
These tests signify utmost stress on any material, both for lighting as well as for the individual electronics components. The heat and cold tests last up to 48 hours.
IP PROTECTION CATEGORY
INTRO
What does IP protection category mean?
IP stands for International Protection. The IP protection categories are determined according to DIN 40 050, Part 9. The purpose of the standard is the exact definition of electrical vehicle equipment against the penetration of solid materials including dust and against water penetration. The different degrees of protection important for signalling systems are explained below.
Protective category IP 5K4K
Dust may only penetrate to the extent that function and safety are not impaired. Water that is sprayed from every direction at increased pressure against the housing must not have any damaging effect: water pressure approx. 4 bar.
Protection class IP 9K
Water that is directed from high-pressure / steam-cleaning equipment onto the housing must not have any damaging effect: water pressure approx. 80 – 100 bar.
Protection class IP 6K7
Dust must not penetrate. No water may penetrate, even if the device is submersed for some time. HELLA products meet the highest requirements and are ideally protected against all kinds of weather conditions.
International Protection (IP) as per DIN 40050, Part 9.Specific definition for road vehicles.5K = Dust protected6K = Dust tight 9K = Protection against water during pressure /
steam cleaning.
The higher the protective category, the better the protection against penetrating media. IP 67 maximum value
� Completely sealed against dust and water.
Dust and water protection IP
FEATURES DESCRIPTION COMMENTS
Beacons for preferential road use. A function monitoring system must be provided.
Beacons - failure control(DIN 14630 – blue)
ECE R65
+8°
-8°
Defines the lighting values, light distribution and colour location of beacons that are to be achieved.
Only beacons that fulfil ECE-R65 can be used on public roads.
ECE R 65
06 07 |
FEATURES DESCRIPTION COMMENTS
Thermal management
Active:Electronic power control of the LED in case of impermissibly high ambient temperatures. This ensures the protection of the LED against destruction by overheating.
Passive:Optimised layout of the components for even temperature distribution and spread.
Active:More development overhead with active thermal management and higher parts prices ensure optimal conditions for maximum design life.
Passive:The warmer the LED gets through exterior factors or heating caused by its own operation, the shorter the service life.
Active
Passive
Overvoltage protection
Supplement to the electronics for protecting the LED against high voltage / current in the vehicle's electric system as per ISO 7637-2.
Overloading of the LEDs can be caused by voltage peaks in the vehicle because of:
� Jump-starting � Faulty control units � Load dump impulse
(incorrect battery contact)
These can stress or damage the LED, which can lead to a failure or a reduction in the design life. By supplementing the circuit with appropriate components, it can be protected, so that the service life is extended and failures are prevented.
Even if the connecting cable is connected the wrong way round, there is still no danger for the electronics.
The semiconductor in an LED must always be operated with the correct polarity. Inverse polarity damages the LED, so that LED lights are always equipped with a reverse polarity protection (diode). This function only works when "+" and "-" are correctly connected, however. If a light has a bi-polar circuit, the functioning is independent of the contact connections. This ensures poka yoke (avoiding faulty installations) in connection with the indentation clamping technology, for instance. However, the additional components on the PCB also increase the costs.
Reverse polarity protection
Electromagnetic compatibility
Electromagnetic compatibility (EMC) tested and EC type approval obtained.
If the light has not been built to EMC specifications, and is thus not certified, interactions that impair other safety-relevant electronic systems may occur.
Examples:Interference in the radio loudspeaker, impairment of ABS electronics, or failure of the light due to sensitivity to interference.
Light approved for transport of dangerous goods according to Hazardous Waste Road Directive (GGVS).
Generally required for lorry and trailer lighting. Precondition for approval: damage to the light source must not cause explosive media to ignite.
Approval for transport of dangerous goods
ECE R 10
INTRO
What is EMC (ECE-R10)?
Electromagnetic compatibility (EMC) is a major quality feature for optical signalling systems and describes two factors:
� Radiated interference: the limitation of radiated electromagnetic interference to a level that guarantees the interference-free operation of other devices in the environment.
� Immunity to interference: guaranteeing sufficiently high resistance to electro-magnetic interference acting from the outside
The legal foundations for this are the CISPR 25 as well as the ISO 7637 and 11452.
Electromagnetic interactions
Protective categories standard CISPR 25:
CISPR 25 is the standard for emitted interference which applies a classification of 1 - 5. In doing so, category 5 products must satisfy the most demanding requirements and are even suitable for installation situations directly next to an aerial. The statutory standards are met by category 3, which guarantees adequate protection in standard practice. (HELLA lighting systems fulfil at least category 3, many even category 5, and guarantee absolute functional safety in all application situations).
Radio / TV
Mobile telephone Sat radio Navigation Telematicsfee collection
Entire electrical system
Distance warning radar
Only beacons, which can have both of these test numbers, possess the authorisation for use on public roads.
1 2 1 ECE R 65
2 ECE R 10
08 09 |
ECE R 65
Light distribution according to ECE-R65
(E-test mark)
In accordance with the directives of the ECE-R65, the beacons must be supplied such that with standard company use their perfect functioning is guaranteed, despite the vibrations which are occurring, and that the characteristics described in this regulation are maintained.
It is important that the beacons are supplied such that it is not possible to adjust them once they are correctly fitted to the vehicle. Incorrect installation could restrict the warning effect.
The light values are measured at a distance of at least 25 m.
Lights which are not equipped with bulbs as a light source must comply with the minimum and highest requirements which are established by taking light intensity measurements after one and after 30 minutes of operation. This shows how important thermal management is for LED beacons, as only an optimized thermal management system can guarantee optimum lighting values even after long periods of use.
A beacon must be fitted to a vehicle such that every person can detect the warning signal from a perimeter of 20 m. If this is not possible, additional warning systems (e.g. more beacons) must be fitted to the vehicle.
The following representations show the implementation of the ECE-R65 (person: 1.8 m tall).
Light distribution as per ECE R 65
4 m
Braking distance
28.5 m
15.7 m
70 cd+ 8°
70 cd- 8°
100 cd0°
Braking distance
70 cd
70 cd
17.8 m
5 m
100 cd2.5 m
+ 8°
- 8°
0°
There are many reasons why light emitting diodes are being used in more and more automotive areas. First of all, they have simply proven themselves to be the better solution in many ways. Secondly, as a lighting pioneer, HELLA made use of these "better solutions" early on in a broad range of applications.
When it comes to lighting technology, achieving milestones is nothing new for HELLA. Again and again, the international family-owned and operated company has assumed a pioneering role by pooling its expertise from the fields of light, electronics and thermal management to create new and innovative products. A uniquely strong combination for developing LED products. Especially with regard to dynamic LED lighting systems, which will be increasingly relied on for active lighting functions.
Technology follows design!
Cutting-edge product designs can only be realised by applying the best possible technological expertise. Long-term experience in electronics, thermal engineering and design ensure that LED headlights and lighting systems are developed with consistently high lighting performance.
By constantly developing and enhancing the options and areas of applications for LEDs, HELLA is not only involved in definitively shaping the LED era, but is also making a significant contribution toward increasing active safety.
The technical, economic and safety-related advantages of
LEDs speak for themselves
� Long service life � No downtimes or assembly times � Minimal energy consumption � Wear-free and maintenance-free � Higher effective visibility � Dust and water-resistant � Compact sizes � Rapid response times � New scope for design
In 2011, HELLA built 522,000,000 LEDs.
WELCOME TO THE LED AGE
INTRO
10 11 |
LIGHT IS TECHNOLOGY
INTRO
Basic properties
Service life – how temperature development
affects the service life
The service life or also the light degeneration of an LED refers to the period after which the light output sinks to half of its original value. The functioning of an LED depends on several factors. The semiconductor material used is as important as the operating conditions or the degeneration of the silicon crystal.
The actual value of the service life cannot be generally determined, though. While standard LEDs may last up to 100,000 hours, high-performance LEDs can be used for only about a quarter to a half of that time (25,000 - 50,000). If both diodes were to be used non-stop, they could be used continually for eleven and more than two years, respectively.
The service life greatly depends on the location and the provided current density. The higher the current flow, the more the diode heats up. This shortens the service life. The ambient temperature is also relevant for the service life, as the diode generally fails sooner, if it is warmer. Basically, the intensity of the light radiation in LEDs continually decreases over time. This is an advantage, as unlike traditional lights (incandescent, halogen), an LED doesn't suddenly leave you standing in the dark. Even if the light output is reduced, it normally does not suddenly fail. The plastic normally used in the lenses of LEDs gradually becomes hazy, which also affects the light yield negatively.
Main factors affecting the service life
� Temperature � Current density � Degeneration of the silicon crystal
LED control
As LEDs require only little current, they already illuminate when they receive only a fraction (a few mA) of the permitted forward current. This is often enough to provide light. As already mentioned, there are different ways of operating LEDs, depending of area of application.
Here are three of these ways.
DC / DC is standard for HELLA beacons. This way, we can guarantee an extremely high efficiency so as to keep heat losses (intrinsic warming) to a minimum.
Three ways of controlling LEDs
Resistance
Loss ~ 50 - 60%
"Low Power" applications
"High Power" applications
Loss ~ 40 - 50% Loss ~ 10 - 20%
Constant current
I = const.
DC / DC converter
Power input Power input Power input
12 13 |
One example from the headlight area:
People who drive a lot know the situation. Poor road illumination due to soiled headlights. Frequent manual cleaning then creates a must. Yet after only a short time back on the road, the headlights are dirty again due to particles being swirled around by other vehicles. This leads not only to reduced light levels but also to glare for oncoming traffic.
Influence of dirty beacons on the warning effect
The warning signal effect of light-intensive beacons is impaired by dirt. To reduce or avoid dirt deposits on the light domes, HELLA uses smooth surfaces without external lenses.
These are much less sensitive to dirt, therefore guaranteeing a optimum warning effect.
Clean beacons � Maximum warning effect � No light scattering � Optimum light aperture
Soiled beacons
� Reduced warning effect � Broad light scattering � Reduced light aperture
Deflection and absorption of light beams by dirt particles
ELIVER. The online comparison tool for beacons, optical warning
systems, worklights and auxiliary lights
HELLA beacons and optical warning systems are a prime example of quality, practicality, safety and cost-efficiency. For all types of municipal superstructures and special superstructures (e.g. refuse lorries, road salt vehicles, sweeping machines among others) as well as emergency vehicles, HELLA can provide the correct beacons or warning systems.
Continuous research and development as well as customer-specific solutions for small- and large-scale production make HELLA the ideal partner for ministries, local authorities and the private sector. The LED products designed by Hella are particularly resistant to vibrations, dirt and water. In addition, the use of LED technology has a positive effect on the efficiency and ecological balance (reduced CO2 emissions). By using our ELIVER tool for beacons and optical warning systems, you can compare selected products in practical, realistic scenarios to make sure you make the right decision for each application. You can choose from the most varied of vehicles and scenarios.
HELLA has the right worklights and auxiliary lights for any kind of agricultural machinery, like for example, tractors or combine harvesters, construction machines, forestry machines, special vehicles as well as lorries and heavy goods vehicles. Use our ELIVER tool to compare our outstanding products and select the perfect worklight or auxiliary light for you and your working life. View the light distribution on a dirt track, on a country road or in an off-road scenario. ELIVER also provides you with all the relevant information about performance and technical data.
INTRO
ONLINE TOOLS
OWS 7 configurator
With the new OWS 7 configurator, you can assemble your own, individual OWS 7. From the vehicle selection (compacts, transporters, sprinters, and breakdown vehicles) to a variety of roof beam widths to individual light modules. Of course you can also choose other equipment, such as worklights, chaser light signals, and lateral close-range illumination.
Afterwards you will see a preview of your individual OWS 7 in order to test all the functions selected.
Configure your individual OWS 7 here: www.hella.com/ows7
14 15 |
HELLA beacons are suitable for the most varied of applications. The vehicle symbols provide a recommendation as to which product is most suitable for a certain application area. Factors like warning signal intensity, service life, robustness etc. play a key role here. As each application places differing requirements on the product.
PERIOD OF USE / LOCATION OF USE / RECOMMENDATION
Airport vehicle Street cleaning vehicle
Mine vehicle Winter service vehicle
Rubbish truck Forklift truck
Police vehicle /
emergency vehicle
small
Truck
Construction vehicle Emergency vehicle
Rescue vehicle /
escort vehicle Agricultural vehicles
Towing vehicleHeavy goods lorry
HELLA beacons with powerful warning effect signal to the other road users: please take care – work is going on around this vehicle.
They enable maximum own- and third-party safety by means of an intensive warning effect. This safety is achieved by the optimum light bundling and distribution, the resulting high range as well as the very high light intensity.
You can rely 100% on our beacons. HELLA lights are distinguished by their outstanding quality in terms of processing and stability - the long service life is proof of this!
BEACONS - INTRO
16 17 |
BEACONS
HELLA BEACON PRODUCT FINDER
Product line Vehicle recommendation Application examples
LED
K-LED 2.0
Warning effect
Robustness
Service life
Life cycle costs
Extremely long period of use (e.g. Refuse lorries, heavy goods vehicles)
Rota LED
Warning effect
Robustness
Service life
Life cycle costs
Intensive use in agriculture or on construction site vehicles with long operating times
KL 7000 LED
Warning effect
Robustness
Service life
Life cycle costs
Lorry / trailer with long periods of use and high demands (e.g. long-distance traffic)
Xenon
KLX 7000
Warning effect
Robustness
Service life
Life cycle costs
Use for emergency or escort vehicles to heavy goods transporters
KLX JuniorPlus
Warning effect
Robustness
Service life
Life cycle costs
Combine harvester or heavy goods transporter
18 19 |
Product line Vehicle recommendation Application examples
Halogen
KL 8000
Warning effect
Robustness
Service life
Life cycle costs
Large fire brigade vehicles
KL 7000
Warning effect
Robustness
Service life
Life cycle costs
Use e.g. on lorries or for rescue vehicles
Rotafl ex
Warning effect
Robustness
Service life
Life cycle costs
Optimal for use on tractors or construction site vehicles with an average period of use
Rota Compact
Warning effect
Robustness
Service life
Life cycle costs
Optimal for use on tractors or construction site vehicles with an average period of use
BEACONS
PRODUCT LINE PAGE F (FIXED ATTACHMENT) FL (FLEXIBLE PIPE-SOCKET ATTACHMENT)
LED
K-LED 2.0 22 – 23
Rota LED 24 – 25
KL 7000 LED 26 – 27
Xenon
KLX 7000 28 – 29
KLX 5000 30 – 31
KLX JuniorPlus 32 – 33
Halogen
KL 7000 34– 35
KL Rotfl ex / Rotafi x 36 – 37
KL Rota Compact 38 – 39
KL 600 / 700 / 710 40 –41
KL JuniorPlus 42 – 43
KL 8000 44
KL 5000 45
BEACONS – OVERVIEW
20 21 |
R (PIPE-SOCKET ATTACHMENT) M (MAGNETIC ATTACHMENT)SB (INDIVIDUAL SCREW JOINT) /
LEMO PLUG
LED BEACONS
2.0 Types of warning signal
First HELLA beacons where you can choose from rotating or flashing warning signals.
2.0 Brightness levels
The integrated light sensor automatically toggles between day and night mode. This guarantees the best possible warning effectiveness.
Functional safety
First HELLA beacons to meet the requirements of IP 67. The beacon is dust-tight and a brief immersion in water is also possible.
Vibration resistance
Without any moving parts, the beacon is protected from strong vibrations and shocks.
Compact design
Extremely flat design and impact-resistant dome.
Low life cycle costs
Maintenance-free beacon with a very high service life. Reduced maintenance costs and minimum downtimes.
K-LED 2.0 BEACON
TYPE APPROVAL
Interference suppression (CISPR25) Power-controlled class 5
Approval GGVSE / ADR
EMC compatibility 036816
TECHNICAL SPECIFICATIONS
Nominal voltage (UN) Multi-voltage
Operating voltage (UB) 10 – 32 V
Total current consumption 0.45 A to 2.5 A
Power consumption max. 30 W
Operating temperature range -40°C to +60°C
Dome Polycarbonate
Position of use upright
Protection category IP 67
PERFECT FOR:
Lum
inou
s in
tens
ity
Rotating light function:
Flashing function:
Lum
inou
s in
tens
ity
TimeIntensive perception thanks to double-flash signal,360° warning effect, rapid increase in light values, signal can be perceived immediately.
TimeHomogenous illumination with rapid increase in the light values, signal can be perceived immediately.
22 23 |
K-LED 2.0 F BEACON
Multi-voltage, amber 2XD 011 557-101
Multi-voltage, blue 2XD 011 557-111
Multi-voltage, red 2XD 011 557-121
Multi-voltage, green on request*
* No ECE approval – use as far as permitted by legislation.
Not approved for road traffic in Germany, Austria and Switzerland.
The products on this page have the following features:
ECE R65
+8°
-8°
K-LED 2.0 R BEACON
Multi-voltage, amber 2XD 011 557-201
Multi-voltage, blue 2XD 011 557-211
Multi-voltage, red 2XD 011 557-221
Multi-voltage, green on request*
K-LED 2.0 M BEACON
Multi-voltage, amber 2XD 011 557-301
Multi-voltage, blue 2XD 011 557-311
Multi-voltage, red 2XD 011 557-321
Multi-voltage, green on request*
� Long service life
No moving parts, no wear and maximum reliability. � Cost saving
Since LEDs are maintenance-free, they do not cause any additional costs for spare parts or maintenance. Downtimes are reduced to a minimum.
� Vibration resistance
Especially insensitive towards vibration and jolting due to the use of LED technology.
� Rotating light function
Innovative electronics concept makes a rotary function possible without moving parts.
� Compact design
Flat, compact design and impact-resistant dome made of polycarbonate protect the light from impact e.g. branches.
� Installation
Three different variants guarantee add-on solutions for every application.
ROTA LED BEACON
TYPE APPROVAL
Lighting technology homologation, amber TA1 003109
Lighting technology homologation, blue TB1 003109
Interference suppression (CISPR25) Power-controlled class 5
Approval GGVSE / ADR
EMC compatibility 035517
LED BEACONS
TECHNICAL SPECIFICATIONS
Nominal voltage (UN) Multi-voltage
Operating voltage (UB) 10 – 32 V
Total current consumption approx. 0.8 A (12 V), ca. 0.4 A (24 V)
Power consumption approx. 10 W
Dome Polycarbonate
Position of use upright
Protection category IP 5KX, IP X4K and IP X9K
Lum
inou
s in
tens
ity
TimeHomogenous illumination with rapid increase in the light values, signal can be perceived immediately.
Rotating light function:
PERFECT FOR:
24 25 |
ROTA LED M BEACON
Multi-voltage 10 – 32 V, amber 2RL 010 979-021
Multi-voltage 10 – 32 V, blue 2RL 010 979-121
Multi-voltage 10 – 32 V, red on request*
Multi-voltage 10 – 32 V, green on request*
ROTA LED FL BEACON
Multi-voltage 10 – 32 V, amber 2RL 010 979-011
Multi-voltage 10 – 32 V, blue 2RL 010 979-111
Multi-voltage 10 – 32 V, red on request*
Multi-voltage 10 – 32 V, green on request*
ROTA LED F BEACON
Multi-voltage 10 – 32 V, amber 2RL 010 979-001
Multi-voltage 10 – 32 V, blue 2RL 010 979-101
Multi-voltage 10 – 32 V, red on request*
Multi-voltage 10 – 32 V, green on request*
* No ECE approval – use as far as permitted by legislation.
Not approved for road traffic in Germany, Austria and Switzerland.
The products on this page have the following features:
ECE R65
+8°
-8°
IP 9K
� Long service life
State-of-the-art LED technology enables an optimum signal pattern with less power consumption.
� Rotating light function
Innovative electronics concept makes a rotary function possible without moving parts.
� Installation
Three different attachment variants compliant with DIN 14620 guarantee add-on solutions for every application. The fixed installation versions can be attached from above and from below.
� Cost saving
Since LEDs are maintenance-free, they do not cause any additional costs for spare parts or maintenance. Downtimes are reduced to a minimum.
� Compact design
The combination of thermal management and optics in one module makes a remarkably compact design possible.
� Upgrade to LED
Existing halogen versions can be upgraded to LED without replacing the base housing and without additional installation costs.
� Lower overall height
Even trucks with bunks stay below the maximum permissible vehicle height on public roads of 4m.
KL 7000 LED BEACON
TYPE APPROVAL
Lighting technology homologation, amber 65 00 339710 03 6194TA1
Interference suppression (CISPR25) Power-controlled class 5
Approval GGVSE / ADR
EMC protection 036194ECE-R10 036194
TECHNICAL SPECIFICATIONS
Nominal voltage (UN) Multi-voltage
Operating voltage (UB) 10 – 32 V
Total current consumption 0.8 A 0.4 A
Power consumption 10 W
Dome PMMA
Position of use upright
Protection category IP 5K4K, IP X9K
LED BEACONS
� Thermal management
LEDs are heat-sensitive. If the LEDs become too hot, the diodes can lose their luminous intensity and even be destroyed completely in the worst case. HELLA´s selection of heat-conducting materials and arrangement of components ensure effective heat flow: the thermal management directs heat away from the LED.
� Scratch-proof, smooth dome
The scratch-proof and dirt-resistant smooth dome guarantees optimum warning effect.
PERFECT FOR:
Lum
inou
s in
tens
ity
TimeHomogenous illumination with rapid increase in the light values, signal can be perceived immediately.
Rotating light function:
26 27 |
KL 7000 LED M
Multi-voltage 10 – 32 V, amber 2RL 011 484-021
Multi-voltage 10 – 32 V, blue on request*
Multi-voltage 10 – 32 V, red on request*
Multi-voltage 10 – 32 V, green on request*
KL 7000 LED FL
Multi-voltage 10 – 32 V, amber 2RL 011 484-011
Multi-voltage 10 – 32 V, blue on request*
Multi-voltage 10 – 32 V, red on request*
Multi-voltage 10 – 32 V, green on request*
KL 7000 LED F
Multi-voltage 10 – 32 V, amber 2RL 011 484-001
Multi-voltage 10 – 32 V, blue on request*
Multi-voltage 10 – 32 V, red on request*
Multi-voltage 10 – 32 V, green on request*
* No ECE approval – use as far as permitted by legislation.
Not approved for road traffic in Germany, Austria and Switzerland.
The products on this page have the following features:
ECE R65
+8°
-8°
IP 9K
HIGH-QUALITY DOUBLE FLASH TECHNOLOGY –
EXTREMELY HIGH WARNING EFFECTIVENESS
� Excellent lighting values on account of high-quality electronics and efficient internal lens system
� Integrated personal protection cut-off of the live components guarantees safe handling
� Powerful electronics with self-diagnosis function, polarity reversal protection, undervoltage cut-off and function control output (e.g. for relays or bulbs)
� Replaceable standard flash tube X1 with practical pin base for quick and easy bulb replacement
� Replaceable electronics with socket offer top service friendliness
� Highest EMC protection class thanks to high-quality, robust aluminium housing and additional EMC shield cage
� Excellent cooling system – best protection for continuous operation and high ambient temperatures
� Smooth, easy-to-clean dome made of polycarbonate � Bayonet closure system with waterproof pressure
mechanism
KLX 7000 BEACON
Luminous intensityin candela (cd)
TYPE APPROVAL
Lighting technology homologation, amber 001399 (ECE-R65)
Lighting technology homologation, blue 001399 (ECE-R65)
EMC compatibility: yellow, blue 031889
EMC compatibility: red 037140
TECHNICAL SPECIFICATIONS
Nominal voltage (UN) 12 V 24 V
Operating voltage (UB) 10 – 15 V 20 – 30 V
Interference suppression Conducted class 5 (CISPR 25)
Flashing frequency 2.05 +/- 0.03 Hz double flash
Flashing frequency, red 1.66 Hz double flash
Electrical flash energy 12 + 2 Ws
Electrical flash energy, red 8 + 1.5 Ws
Total current consumption 3.3 A 1.6 A
Undervoltage cut-off 8 V 12 V
Function control output Capable of bearing loads up to 0.5 A
Operating temperature range -40°C to +60°C
Installation (KLX 7000 F) From above and below
Position of use upright
Reverse polarity protection Fuses
Protection category IP 5K4K, IP X9K (resistant to dust and high-pressure jet cleaners)
� Fixed attachment version (design B1 as defined by DIN 14620) With 2 hole circles (130 mm (DIN) or 107 mm, installation from above or below)
� Flexible version (design A as defined by DIN 14620) With shock-absorbing, vibration-damping base; even heavy impact is cushioned and the light always returns to the same position as before (maximum angle of tilt: 90°)
� Magnetic version (according to ISO 4148) With five high-strength magnets for safe attachment
XENON BEACONS
PERFECT FOR:
28 29 |
KLX 7000 FL BEACON
12 V, amber 2RL 008 183-101
24 V, amber 2RL 008 183-111
12 V, blue 2RL 008 183-001
24 V, blue 2RL 008 183-011
24 V, red 2RL 008 183-211*
12 V, green on request*
24 V, green on request*
KLX 7000 F BEACON
12 V, amber 2RL 008 181-101
24 V, amber 2RL 008 181-111
12 V, blue 2RL 008 181-001
24 V, blue 2RL 008 181-011
24 V, red 2RL 008 181-211*
12 V, green on request*
24 V, green on request*
* No ECE approval – use as far as permitted by legislation.
Not approved for road traffic in Germany, Austria and Switzerland.
The products on this page have the following features:
KLX 7000 M BEACON
12 V, amber 2RL 008 182-101
24 V, amber 2RL 008 182-111
12 V, blue 2RL 008 182-001
24 V, blue 2RL 008 182-011
12 V, red on request*
24 V, red on request*
12 V, green on request*
24 V, green on request*
IP 9K ECE R65
+8°
-8°
TOP SOLUTION FOR UNDERCOVER VEHICLES
� Extremely compact design, easy to handle � Diecast aluminium base and EMC shield cage guarantee
excellent EMC protection � Variants available with plug for the cigarette lighter socket or
Lemo plug � Special cable with recessed start of spiral: easy to route
through to the inside of the vehicle, annoying driving noises and strain on the door seals are minimised
� Smooth dome made of sturdy polycarbonate provides optimum protection from soiling and is easy to clean
� Effective three-point magnetic attachment � Bayonet closure with safety screw � Tested to ISO 4148
KLX 5000 BEACON
TYPE APPROVAL
Technical light homologation 001290 (ECE-R65)
EMC compatibility 031775
TECHNICAL SPECIFICATIONS
Nominal voltage (UN) 12 V
Operating voltage (UB) 10 – 15 V
Interference suppression Conducted class 5 (CISPR 25)
Flashing frequency 2.1 Hz double flash
Electrical flash energy 10 + 2 Ws
Total current consumption 3 A
Operating temperature range -40°C to +60°C
Reverse polarity protection Available
Position of use upright
Protection category IP 5K4K, IP X9K (resistant to dust and high-pressure jet cleaners)
XENON BEACONS
PERFECT FOR:
Luminous intensityin candela (cd)
30 31 |
KLX 5000 M BEACON
12 V, amber on request*
12 V, blue 2RL 008 366-021
12 V, red on request*
12 V, green on request*
* No ECE approval – use as far as permitted by legislation.
Not approved for road traffic in Germany, Austria and Switzerland.
The products on this page have the following features:
KLX 5000 M BEACON
12 V, amber with Lemo plug on request*
12 V, blue, with Lemo plug 2RL 008 366-031
12 V, red, with Lemo plug on request*
12 V, green, with Lemo plug on request*
IP 9K ECE R65
+8°
-8°
XENON BEACONS
XENON TECHNOLOGY AT AN ATTRACTIVE VALUE-FOR-
MONEY PRICE
� Plug-type flash tubes are easy to replace � Electronics with integrated polarity reversal protection � System made of smooth, easy-to-clean dome made
of robust polycarbonate and internal lens with special patterning for optimum light output
� Practical pressure point closure for simple handling � Modern design � Anti-theft protection due to inner hex bolt � At the same time, the flexible housing base serves as a
vibration damper � Sturdy, easy-to-clean dome made of polycarbonate with
handy pressure-point closure system � Fixed installation version (design B1 as defined by
DIN 14620) With sturdy three-point attachment. Elastic, impact-absorbing base absorbs even heavy impacts and minimises the danger of damage; the light always returns to the optimum position (maximum inclination: 90°)
KLX JUNIORPLUS BEACON
TYPE APPROVAL
Lighting technology homologation, amber 001765 (ECE-R65)
Lighting technology homologation, blue 002141 (ECE-R65)
EMC protection 033486
TECHNICAL SPECIFICATIONS
Nominal voltage (UN) 12 V 24 V
Operating voltage (UB) 12 – 16 V 24 – 32 V
Interference suppression Conducted class 3 (CISPR 25)
Flashing frequency 2 Hz double flash
Electrical flash energy 10 + 2 Ws
Total current consumption 3.3 A 1.7 A
Operating temperature range -40°C to +60°C
Reverse polarity protection Fuses
Undervoltage cut-off 4 V 12 V
Installation (KLX JuniorPlus F) From the bottom
Position of use upright
Protection categoryIP 5K4K, IP X9K
(resistant to dust andhigh-pressure jet cleaners)
� Flexible pipe-socket attachment (design A as defined by DIN 14620) With shock-absorbing, vibration-damping base; even heavy impact is cushioned and the light always returns to the same position as before (maximum angle of tilt: 90°); theft protection thanks to attachment with inner hex bolt
� Magnetic version (according to ISO 4148) Safer seat due to the 3 high-strength magnets
� SB variant with central bolts
Variant with individual screw attachment available for fixed installation
PERFECT FOR:
Luminous intensityin candela (cd)
32 33 |
* No ECE approval – use as far as permitted by legislation.
Not approved for road traffic in Germany, Austria and Switzerland.
The products on this page have the following features:
BEACON KLX JUNIORPLUS M
12 V, amber 2XD 009 053-001
12 V, blue 2XD 009 053-021
12 V, red on request*
12 V, green on request*
BEACON KLX JUNIORPLUS FL
12 V, amber 2XD 009 052-001
24 V, amber 2XD 009 052-011
12 V, blue 2XD 009 052-021
24 V, blue 2XD 009 052-031
12 V, red on request*
24 V, red on request*
12 V, green on request*
24 V, green on request*
BEACON KLX JUNIORPLUS F
12 V, amber 2XD 009 051-001
24 V, amber 2XD 009 051-011
12 V, blue 2XD 009 051-021
24 V, blue 2XD 009 051-031
12 V, red on request*
24 V, red on request*
12 V, green on request*
24 V, green on request*
KLX JUNIORPLUS SB BEACON
12 V, amber 2XD 009 054-001
12 V, blue on request*
12 V, red on request*
12 V, green on request*
IP 9K ECE R65
+8°
-8°
HALOGEN BEACONS
MAXIMUM LIGHT VALUES – OPTIMUM SIGNALLING EFFECT
� Extremely high light values for optimum warning effectiveness
� Full light power, focusing and distribution through the rotating unit made up of a high-sheen metallised parabolic reflector and bulb
� Maximum running smoothness by means of maintenance-free drive bearings and double-belt technology
� Electronic motor control with multi-voltage function for a constant rotating frequency even in the event of fluctuations in the vehicle electric system
� Excellent EMC protection, integrated polarity reversal protection
� Operation with 12 or 24 V possible by replacing the bulbs � Smooth, easy-to-clean dome with a handy pressure point
closure � Fixed attachment version (design B1 as defined by DIN
14620) With 2 hole circles (130 mm (DIN) or 107 mm, installation from above or below)
� Flexible pipe-socket attachment
(design A as defined by DIN 14620) With shock-absorbing, vibration-damping base; even heavy impact is cushioned and the light always returns to the same position as before (maximum angle of tilt: 90°); theft protection thanks to attachment with inner hex bolt
� Pipe-socket version (design A as defined by DIN 14620) Theft protection thanks to attachment with inner hex bolt
� Magnetic version (according to ISO 4148) Safer seat due to the 3 high-strength magnets
KL 7000 BEACON
Luminous intensityin candela (cd)
KL 7000, 230 V
For reliable protection in the 230 V network.
� Efficient light output thanks to the special pattern on the sturdy dome
� VdS certificate as optical signalling equipment for burglar alarm systems
Areas of application:
� Use on construction sites and with suspended loads � For traffic warning and guidance on company land � As an alarm signal for fault messages during machine
operation as well as at the beginning or end of a production process
� As a status signal for SOS-telephones and fire alarms, for phone call and burglary alarm systems
� For marking emergency exits and escape routes
PERFECT FOR:
TECHNICAL SPECIFICATIONS
Nominal voltage (UN) 12 V 24 V 230 V
Operating voltage (UB)10.8 – 13.8 V
21.6 – 27.6 V -
Interference suppression Power-controlled class 5 (CISPR 25)
Engine speed 160 U/min 200 U/min
Power consumption of bulb 55 W 70 W 25 W
Total current consumption 5.5 A 3.5 A 0.2 A
Operating temperature range -40°C to +60°C -30°C to +60°C
Installation (KL 7000 F) From above or below
From above or below
Position of use upright
Protection category IP 5K4K, IP X9K (resistant to dust and high-pressure jet cleaners)
TYPE APPROVAL
Lighting technology homologation, amber 001241, (ECE-R65)
Lighting technology homologation, blue 001240, (ECE-R65)
EMC compatibility 031740
230 V protective mark
34 35 |
* No ECE approval – use as far as permitted by legislation.
Not approved for road traffic in Germany, Austria and Switzerland.
ECE R65
+8°
-8°
IP 9KThe products on this page have the following features:
KL 7000 F BEACON
12 V, amber 2RL 008 061-101
24 V, amber 2RL 008 061-111
12 V, blue 2RL 008 061-001
24 V, blue 2RL 008 061-011
12 V, red on request*
24 V, red on request*
12 V, green on request*
24 V, green on request*
230 V, amber 2RL 008 064-101*
230 V, red 2RL 008 064-101*
KL 7000 R BEACON
12 V, amber 2RL 008 060-101
24 V, amber 2RL 008 060-111
12 V, blue 2RL 008 060-001
24 V, blue 2RL 008 060-011
12 V, red on request*
24 V, red on request*
12 V, green on request*
24 V, green on request*
KL 7000 FL BEACON
12 V, amber 2RL 008 063-101
24 V, amber 2RL 008 063-111
12 V, blue 2RL 008 063-001
24 V, blue 2RL 008 063-011
12 V, red on request*
24 V, red on request*
12 V, green on request*
24 V, green on request*
KL 7000 M BEACON
12 V, amber 2RL 008 062-101
24 V, amber 2RL 008 062-111
12 V, blue 2RL 008 062-001
24 V, blue 2RL 008 062-011
12 V, red on request*
24 V, red on request*
12 V, green on request*
24 V, green on request*
STANDARD SOLUTION FOR ROBUST APPLICATIONS
� Tough rotary beacons � Optimum light power, focusing and distribution through the
rotating unit made up of a high-sheen metallised parabolic reflector and bulb
� Compact design shape and unmistakeable look � Drive from motor with plastic worm gear � Sturdy domes with smooth, easy-to-clean surface � Fixed attachment version
(design B1 as defined by DIN 14620) Installation possible from above or below
� Flexible pipe-socket attachment
(design A as defined by DIN 14620) With shock-absorbing, vibration-damping base; even heavy impact is cushioned and the light always returns to the same position as before (maximum angle of tilt: 90°)
� Magnetic version (according to ISO 4148) Safe attachment due to the high magnetic force
ROTAFLEX / ROTAFIX BEACON
Luminous intensityin candela (cd)
HALOGEN BEACONS
PERFECT FOR:
TYPE APPROVAL
Lighting technology homologation, amber 006509, (ECE-R65)
Lighting technology homologation, blue 006513, (ECE-R65)
EMC compatibility 032181
TECHNICAL SPECIFICATIONS
Nominal voltage (UN) 12 V 24 V
Operating voltage (UB) 10.8 – 13.8 V 21.6 – 27.6 V
Interference suppression Power-controlled class 3 (CISPR 25)
Engine speed 160 U/min
Power consumption of bulb 55 W 70 W
Total current consumption 5.5 A 3.5 A
Operating temperature range -40°C to +60°C
Installation From above and below
Position of use upright
Protection category IP 5K4K, IP X9K (resistant to dust and high-pressure jet cleaners)
36 37 |
* No ECE approval – use as far as permitted by legislation.
Not approved for road traffic in Germany, Austria and Switzerland.
The products on this page have the following features: ECE R65
+8°
-8°
IP 9K
KL ROTAFIX M BEACON
12 V, amber 2RL 007 337-021
24 V, amber 2RL 007 337-031
12 V, blue 2RL 007 337-121
24 V, blue 2RL 007 337-131
12 V, red on request*
24 V, red on request*
12 V, green on request*
24 V, green on request*
KL ROTAFLEX FL BEACON
12 V, amber 2RL 006 846-001
24 V, amber 2RL 006 846-011
12 V, blue 2RL 006 846-101
24 V, blue 2RL 006 846-111
12 V, red on request*
24 V, red on request*
12 V, green on request*
24 V, green on request*
KL ROTAFIX F BEACON
12 V, amber 2RL 007 337-001
24 V, amber 2RL 007 337-011
12 V / 24 V, amber (twin-belt drive) 2RL 007 337-041
12 V, blue 2RL 007 337-101
24 V, blue 2RL 007 337-101
12 V, red on request*
24 V, red on request*
12 V, green on request*
24 V, green on request*
COMPACT BEACON FOR TOUGH
APPLICATIONS.
� Especially impact-resistant � Low-nose belt drive � Polycarbonate dome is impact and shock-resistant � Different attachment versions for every application
Rota Compact FL:
� Elastic, impact-absorbing base minimises the danger of damage; the light always returns to the optimum position (maximum inclination: 90°)
� At the same time, the elastic base serves as a vibration damper
KL ROTA COMPACT BEACON
TYPE APPROVAL
Lighting technology homologation, amber 002076, (ECE-R65)
EMC compatibility 034277
Luminous intensity in candela (cd)
TECHNICAL SPECIFICATIONS
Nominal voltage (UN) 12 V 24 V
Operating voltage (UB) 10.8 – 13.8 V 21.6 – 27.6 V
Engine speed 180 rpm
Power consumption of bulb 55 W 70 W
Total current consumption 5 A 3 A
Operating temperature range -40°C to +60°C
Dome Polycarbonate
Position of use upright
Protection category IP 5K4K, IP X9K (resistant to dust and high-pressure jet cleaners)
EMC interference immunity VDE 0879 Part 3 Class 3
HALOGEN BEACONS
PERFECT FOR:
38 39 |
KL ROTA COMPACT F BEACON
12 V, amber 2RL 009 506-201
24 V, amber 2RL 009 506-211
12 V, red on request*
24 V, red on request*
12 V, green on request*
24 V, green on request*
KL ROTA COMPACT FL BEACON
12 V, amber 2RL 009 506-001
24 V, amber 2RL 009 506-011
12 V, red on request*
24 V, red on request*
12 V, green on request*
24 V, green on request*
KL ROTA COMPACT R BEACON
12 V, amber 2RL 009 506-101
24 V, amber 2RL 009 506-111
12 V, red on request*
24 V, red on request*
12 V, green on request*
24 V, green on request*
* No ECE approval – use as far as permitted by legislation.
Not approved for road traffic in Germany, Austria and Switzerland.
KL ROTA COMPACT M BEACON
12 V, amber 2RL 009 506-301
24 V, amber 2RL 009 506-311
12 V, red on request*
24 V, red on request*
12 V, green on request*
24 V, green on request*
ECE R65
+8°
-8°
IP 9KThe products on this page have the following features:
HALOGEN BEACONS
KL 600 – FOR SURFACE MOUNTING
The HELLA KL 600 is the ideal solution where rotary beacons need to be used quickly and mobile.
The rotary beacon series 600 is designed especially for mobile use. It is the ideal beacon for vehicles that are required to be equipped quickly and effortlessly. The housing base is designed for pipe-socket attachment (according to DIN 14 620, Form A) and can be fitted quickly and reliably to any socket pipe with integrated plug socket. This pipe-socket attachment can be used anywhere where superstructures or the like are concealing the vehicle´s roof and therefore also the rotary beacons which are fitted to the roof. A special jig, e.g. a telescopic tripod, enables the beacon to function fully. Another application possibility is for motor vehicles which have to be equipped with a rotary beacon only from time to time.
The housing base and dome are constructed as a breathable system which means that the reflector and the dome do not mist up. The bayonet coupling is provided with an additional safeguard, which is easy to release when required. Some practical installation accessories round off the fields of application.
KL 600 / 700 / 710 BEACON
TYPE APPROVAL
KL 600 A 0088072, (ECE-R65)
KL 700 A 0088072, (ECE-R65)
KL 710 A 006506, (ECE-R65)
TECHNICAL SPECIFICATIONS
Nominal voltage (UN) 12 V 24 V
Engine speed 160 U / min
Interference suppression in accordance with VDE 0879 Part 3, VHF 5
Operating temperature range -40°C to +60°C
Power consumption of bulb 55 W 70 W
Total current consumption 5.5 A 3.5 A
Protection categoryIP 5K4K, IP X9K (resistant to dust and
high-pressure jet cleaners)DIN 4000, Sheet 9
Position of use upright
PERFECT FOR:
KL 700 / 710 – FOR FIXED INSTALLATION
Safety has priority: the ideal solution for vehicles which must be continuously operational.
The KL 700 and KL 710 rotary beacons are designed for fixed installation and differ only in terms of their size. The solid installation base complies with DIN 14620, Form B1 and has a sturdy three-point attachment. A rubber base serves as a gasket between the vehicle´s roof and the housing base, and this is also used as a drilling template when installing. If required, the housing base can be painted in the respective vehicle´s colour.
Luminous intensity in candela (cd)
40 41 |
KL 700 BEACON
12 V, amber 2RL 004 958-101
24 V, amber 2RL 004 958-111
12 V, red with black base 2RL 004 958-201
KL 600 BEACON
12 V, amber 2RL 004 957-101
24 V, amber 2RL 004 957-111
The products on this page have the following features:
KL 710 BEACON
12 V, amber 2RL 006 295-101
24 V, amber 2RL 006 295-111
ECE R65
+8°
-8°
IP 9K
HALOGEN TECHNOLOGY AT AN ATTRACTIVE
VALUE-FOR-MONEY PRICE
� Optimum light power, focusing and distribution through the rotating unit made up of a reflector and bulb
� Maintenance-free belt drive on bearings, for constant rotation frequency and optimum running smoothness
� Multi-voltage function: operation is possible both in 12 and 24 V by moving the drive belt and replacing the bulb
� Integrated polarity reversal protection � Sturdy, easy-to-clean dome with handy pressure-point
closure system � Modern design
� Fixed installation version (design B1 as defined by DIN 14620) with sturdy three-point attachment
� Flexible pipe-socket attachment (design A as defined by DIN 14620) with shock-absorbing, vibration-damping base; even heavy impact is cushioned and the light always returns to the same position as before (maximum angle of tilt: 90°); theft protection thanks to attachment with inner hex bolt
� Magnetic version (according to ISO 4148) safer seat due to the 3 high-strength magnets
KL JUNIORPLUS BEACON
TYPE APPROVAL
Lighting technology homologation, amber 001419 (ECE-R65)
EMC compatibility 032954
HALOGEN BEACONS
PERFECT FOR:
TECHNICAL SPECIFICATIONS
Nominal voltage (UN) 12 V 24 V
Operating voltage (UB) 10.8 – 13.8 V 21.6 – 27.6 V
Engine speed 180 U / min
Interference suppression Conducted class 3 (CISPR 25)
Operating temperature range -40°C to +60°C
Protection category IP 5K4K, IP X9K (resistant to dust and high-pressure jet cleaners)
Installation From the bottom
Position of use upright
Luminous intensity in candela (cd)
42 43 |
KL JUNIORPLUS F BEACON
12 V, amber 2RL 008 965-001
24 V, amber 2RL 008 965-011
12 V / 24 V, amber 2RL 008 965-021
The products on this page have the following features:
KL JUNIORPLUS FL BEACON
12 V, amber 2RL 008 967-001
24 V, amber 2RL 008 967-011
12 V / 24 V, amber 2RL 008 967-021
KL JUNIORPLUS M BEACON
12 V, amber 2RL 008 966-001
12 V / 24 V, amber 2RL 008 966-021
KL JUNIORPLUS SB BEACON
12 V, amber 2RL 008 990-001
24 V, amber 2RL 008 990-011
12 V / 24 V, amber 2RL 008 990-021
IP 9K
LARGE-FORMAT WARNING EFFECTIVENESS
� Specially designed for large emergency vehicles and special vehicles
� Excellent lighting values ensure maximum warning effectiveness and safety
� Full light power, focusing and distribution through the rotating unit made up of a high-sheen metallised parabolic reflector and bulb
� Highest EMC protection class � Maximum running smoothness by means of maintenance-
free drive bearings and double-belt technology � Electronic motor control with multi-voltage function ensures
absolutely constant rotating frequency even in the event of fluctuations in the vehicle electric system
� Integrated polarity reversal protection � Operation with both 12 or 24 V possible by replacing the
bulbs � Smooth, easy-to-clean dome with a handy pressure point
closure for straightforward use � Design B2 as defined by DIN 14620 � Mounting from above or below
KL 8000 BEACON
Luminous intensity in candela (cd)
HALOGEN BEACONS
* No ECE approval – use as far as permitted by legislation.
Not approved for road traffic in Germany, Austria and Switzerland.
PERFECT FOR:
The products on this page have the following features:
ECE R65
+8°
-8°
IP 9K
TECHNICAL SPECIFICATIONS
Nominal voltage (UN) 12 V 24 V
Operating voltage (UB) 10.8 – 13.8 V 21.6 – 27.6 V
Interference suppression Power-controlled class 5 (CISPR 25)
Engine speed 160 U/min
Power consumption of bulb 55 W 70 W
Total current consumption 5.5 A 3.5 A
Operating temperature range -40°C to +60°C
Installation From above and below
Position of use upright
Protection category IP 5K4K, IP X9K (resistant to dust and high-pressure jet cleaners)
TYPE APPROVAL
Lighting technology homologation, amber 001243, (ECE-R65)
Lighting technology homologation, blue 001242, (ECE-R65)
EMC compatibility 031740
KL 8000 F BEACON
12 V, amber 2RL 008 065-101
24 V, amber 2RL 008 065-111
12 V, blue 2RL 008 065-001
24 V, blue 2RL 008 065-011
12 V, red on request*
24 V, red on request*
12 V, green on request*
24 V, green on request*
44 45 |
THE OPTIMUM SOLUTION FOR CIVIL EMERGENCY
VEHICLES
� High-quality halogen rotary mirror technology in the smallest of dimensions
� Full light power, focusing and distribution through the rotating unit made up of a high-sheen metallised parabolic reflector and bulb
� Ergonomic design, simple and safe handling � Attractive price-performance ratio � Excellent EMC protection � Double belt drive ensures maximum running smoothness
and reliability � Special cable with recessed start of spiral: easy to route
through to the inside of the vehicle, annoying driving noises and strain on the door seals are minimised
� Sturdy dome with smooth, easy-to-clean surface � Effective three-point magnetic attachment � Bayonet closure with safety screw � Tested to ISO 4148
KL 5000 BEACON
Luminous intensity in candela (cd)
* No ECE approval – use as far as permitted by legislation.
Not approved for road traffic in Germany, Austria and Switzerland.
PERFECT FOR:
The products on this page have the following features:
TECHNICAL SPECIFICATIONS
Nominal voltage (UN) 12 V
Operating voltage (UB) 10 – 15 V
Interference suppression Conducted class 5 (CISPR 25)
Engine speed 160 U/min
Power consumption of bulb 55 W
Total current consumption 4.5 A
Operating temperature range -40°C to +60°C
Reverse polarity protection Available
Position of use upright
Protection category IP 5K4K, IP X9K (resistant to dust and high-pressure jet cleaners)
TYPE APPROVAL
Lighting technology homologation, blue 001289, (ECE-R65)
EMC compatibility 031774
ECE R65
+8°
-8°
IP 9K
KL 5000 M BEACON
12 V, amber on request*
12 V, blue 2RL 008 364-021
12 V, red on request*
12 V, green on request*
ACCESSORIES AND SPARE PARTS
46 47 |
* No ECE approval – use as far as permitted by legislation.
Not approved for road traffic in Germany, Austria and Switzerland.
FOR HALOGEN BEACONS
KL 7000 BEACON
Dome, amber (polycarbonate) 9EL 862 141-021
Dome, amber (PMMA) 9EL 862 141-001
Dome, blue (PMMA) 9EL 862 140-001
Dome, red (PMMA) 9EL 862 141-011*
Drive belt, 2 pcs. 9XR 854 840-001
Motor (inc. PCB) 9MN 862 741-001
Reflector (inc. base plate and drive belt) 9DX 862 740-001
Bulb 12 V / 55 W 8GH 002 089-133
Bulb 24 V / 70 W 8GH 002 089-251
Rubber base, flat (5 pcs.) 9GD 862 164-001
Rubber base, wedge-shaped (1 pce.) 9GD 863 033-001
Wing nut (with screw and washer as a fixing option for KL 7000 R and FL)
9NM 863 332-001
� Page 35
KL 8000 BEACON
Dome, amber (PMMA)Dome, blue (PMMA) 9EL 862 171-001
Dome, red (PMMA) 9EL 862 171-891*
Drive belt, 2 pcs. 9XR 854 840-001
Motor (inc. PCB) 9MN 862 741-001
Reflector (inc. base plate and drive belt) 9DX 862 742-001
Bulb 12 V / 55 W 8GH 002 089-133
Bulb 24 V / 70 W 8GH 002 089-251
Rubber base, flat (1 pcs.) 9GD 862 178-001
Rubber base, high (1 pce.) 9GD 862 734-001
Rubber base, wedge-shaped with raised attachment interfaces (1 pce.) 9GD 859 037-011
� Page 44
KL 5000 M BEACON
Dome, blue (PMMA) 9EL 862 267-031
Drive belt, 2 pcs. 9XR 854 840-001
Bulb 12 V / 55 W 8HG 002 089-133
� Page 45
KL ROTA COMPACT BEACON
Dome, amber 9EL 864 074-001
Drive belts (2 pcs) 9XR 855 975-001
Motor assembly 9MN 863 026-001
Bulb 12 V / 55 W 8GH 002 089-133
Bulb 24 V / 70 W 8GH 002 089-251
FOR HALOGEN BEACONS
ACCESSORIES AND SPARE PARTS
� Page 39
KL ROTAFLEX FL BEACON
Dome, amber (PMMA) 9EL 859 020-001
Dome, blue (PMMA) 9EL 859 020-101
Motor 12 V (inc. worm gear) 9MN 858 114-001
Motor 24 V (inc. worm gear) 9MN 858 114-011
Reflector (inc. worm wheel) 9DX 860 438-001
Bulb 12 V / 55 W 8GH 002 089-133
Bulb 24 V / 70 W 8GH 002 089-251
Rubber housing with integrated plug socket 9GP 859 115-001
KL JUNIORPLUS BEACON
Dome, amber (PMMA) 9EL 863 100-001
Combination motor 12 V / 24 V 9MN 745 023-001
Bulb 12 V / 55 W 8GH 002 089-133
Bulb 24 V / 70 W 8GH 002 089-251
Drive belts (2 pcs) 9XR 855 975-001
� Page 37
� Page 37
� Page 43
KL ROTAFIX F AND M BEACON
Dome, amber (polycarbonate) 9EL 859 020-001
Dome, blue (PMMA) 9EL 859 020-101
Drive belts (2 pcs) 9XR 854 840-001
Motor 12 V (inc. worm gear) 9MN 858 114-001
Motor 24 V (inc. worm gear) 9MN 858 114-011
Motor 12 / 24 V (inc. PCB) 9MN 862 741-001
Bulb 12 V / 55 W 8GH 002 089-133
Bulb 24 V / 70 W 8GH 002 089-251
Reflector (inc. worm wheel) 9DX 860 271-001
Reflector assembly (inc. drive belt) 9DX 862 844-001
Rubber base, wedge-shaped 9GD 860 396-001
48 49 |
FOR HALOGEN BEACONS
BEACON KL 600 / 700 / 710
Drive belt, 2 pcs. 9XR 854 840-001
Motor, with screw attachment
12 V 9MN 857 622-001
24 V 9MN 857 622-011
Motor, with catch attachment inc. reflector assembly
12 V 9MN 858 616-001
24 V 9MN 858 616-011
Reflector assembly 9DX 859 560-001
Bulb 12 V / 55 W 8GH 002 089-133
Bulb 24 V / 70 W 8GH 002 089-251
KL 600 dome, amber (PMMA) 9EL 856 416-001
KL 600 dome, red (PMMA) 9EL 856 416-011
KL 600 housing base, 12 V 9BG 859 695-101
KL 600 housing base, 24 V 9BG 859 695-111
KL 700 dome, amber (PMMA) 9EL 856 418-001
KL 700 dome, red (PMMA) 9EL 856 418-011
KL 700 rubber base, flat 9GD 856 562-001
KL 700 rubber base, wedge-shaped 9GD 856 863-001
KL 710 dome, amber (PMMA) 9EL 856 416-001
KL 710 rubber base, flat 9GD 858 013-001
KL 710 rubber base, wedge-shaped 9GD 858 086-001
� Page 41
KL JUNIOR BEACON
Fixed attachment, 12 V 2RL 007 550-001
Fixed attachment, 24 V 2RL 007 550-011
Fixed attachment, 12 V / 24 V 2RL 007 550-021
Flexible pipe-socket fixing, 12 V 2RL 007 553-001
Flexible pipe-socket fixing, 24 V 2RL 007 553-011
Flexible pipe-socket fixing, 12 V / 24 V 2RL 007 553-021
Pipe-socket attachment, 12 V 2RL 007 551-001
Pipe-socket attachment, 24 V 2RL 007 551-011
Pipe-socket attachment, 12 V / 24 V 2RL 007 551-021
Magnetic attachment, 12 V 2RL 007 552-001
Magnetic attachment, 24 V 2RL 007 552-011
Magnetic attachment, 12 V / 24 V 2RL 007 552-021
Dome, amber (PMMA) 9EL 860 627-001
Dome, red (PMMA) 9EL 860 628-031
Wedge-shaped base 9GD 860 772-001
Film for magnet 9NU 858 004-001
Motor 12 V 9MN 860 677-001
Motor 24 V 9MN 860 677-011
Motor 12 V / 24 V 9MN 860 677-021
Bulb 12 V / 55 W 8GH 002 089-133
Bulb 24 V / 70 W 8GH 002 089-251
ACCESSORIES AND SPARE PARTS
KLX JUNIORPLUS BEACON
Dome, amber (polycarbonate) 9EL 863 100-031
Fresnel lens on the inside 9EL 862 678-001
Xenon flash tube 8GS 863 261-001
Wing nut (with screw and washer as a fixing option for KLX JuniorPlus FL)
9NM 863 332-001
� Page 33
FOR XENON BEACONS
KLX 5000 BEACON
Dome, amber (polycarbonate) 9EL 862 267-031
Dome, blue (polycarbonate) 9EL 862 267-001
Xenon standard flash tube X1 with pin base 8GS 859 634-001
Lemo socket (for 2RL 008 366-031) 8JB 008 839-001
� Page 31
KLX 7000 BEACON
Dome, amber (polycarbonate) 9EL 862 140-031
Dome, blue (polycarbonate) 9EL 862 140-021
Dome, red (polycarbonate) 9EL 862 140-041*
Fresnel lens on the inside 9EL 862 678-001
PCB with socket, 12 V 9MK 862 863-001
PCB with socket, 24 V 9MK 862 862-001
Dome seal 9GD 862 679-001
Flash tube 8GS 859 634-001
EMC shield cage for flash tube 9HB 862 864-001
Xenon standard flash tube X1 with pin base 8GS 859 634-001
Rubber base, flat, for KLX 7000 F (5 pcs.) 9GD 862 164-001
Rubber base, wedge-shaped, for KLX 7000 F (1 pce.) 9GD 863 033-001
Wing nut (with screw and washer as a fixing option for KLX 7000 FL)
9NM 863 332-001
� Page 29
50 51 |
* No ECE approval – use as far as permitted by legislation.
Not approved for road traffic in Germany, Austria and Switzerland.
ACCESSORIES FOR BEACONS AND WORKLIGHTS WITH PIPE-
SOCKET ATTACHMENT
Description Purchase number Product photo
Support pipefor fixing to the bracket on the side of the vehicle or for welding to a flange, Ø 24 mm, approx. 100 mm long, in accordance with DIN 14620. With integrated plug socket according to DIN 72591 and rubber stoppers.
1-pole,8HG 002 365-001
2-pole,8HG 006 294-101
Support pipeblack, with M8 thread, approx. 220 mm long, with integrated socket and rubber stoppers
8HG 990 368-001
Support pipeTo screw on to the top of flat vehicle roofs 8HG 006 294-011
Support pipeTo screw on to the side of flat cabin roofs
90 mm,8HG 006 294-021
50 mm,8HG 006 294-111
Tiltable socket pipefor screwing to flat vehicle roofs (angle can be adjusted to sloped surfaces)
1-pole,8HG 006 294-031
2-pole,8HG 006 294-141
Support pipewith screw attachment 8HG 006 294-051
Support pipeWith separate ground connection 8HG 006 294-091
Tripod supportwith two screw holes for attachment to the rear of the cabin. Total length approx. 1,000 mm, displacement possibility approx. 700 mm
8HG 006 294-041
DIN-ISO vehicle network socket � 2-pole � For beacons with magnetic attachment (DIN ISO 4165)
8JB 004 777-002
Brass socket
8JB 862 757-001 (round)
8JB 862 757-021 (hex-head, SW 20)
Plug 9GH 096 532-001
Control unitFor functional monitoring of all-round beacons and flashing beacons - indicates the failure of a beacon
24 V,5KG 007 629-001
24 V,5KG 007 629-011
Sometimes, single beacons do not provide sufficient optical warning. By positioning two or four beacons on the outside edges of the vehicle roof, HELLA OWS can offer optimum signalling.
When professionals have to rely on technology, the first choice is warning systems from HELLA. Our OWS guarantee maximum safety. You can rely on them. Always!
Choose different installation heights and widths for differing roof beams. The lighting technology can be chosen from 4 different optical systems. Also, depending on the system, you can opt for various auxiliary lighting systems like worklights, additional flashing lights or alley lights.
The OWS 7 is our "highlight"The modularly constructed system concept enables individual configurationoptions; from the basic through to the high-end version - all requirements are covered!
OPTICAL WARNING SYSTEMS - INTRO
52 53 |
OPTICAL WARNING SYSTEMS
OPTICAL WARNING SYSTEMS – OVERVIEW
OWS 7
PRODUCT LINESingle reflector
(KL-ER)
LED trough parabolic
(KL-LR2)
360° LED module KL-LM2,
flash function
360° LED module KL-LM4,
rotating light function
PRODUCT IMAGE
Rated voltage 12 / 24 V 12 / 24 V 12 / 24 V 12 / 24 V
540 mm – – – –
900 mm ● ● ● ●
1,000 mm ● ● ● ●
1,100 mm ● ● ● ●
1,200 mm ● ● ● ●
1,300 mm ● ● ● ●
1,400 mm ● ● ● ●
1,500 mm ● ● ● ●
1,600 mm ● ● ● ●
1,700 mm ● ● ● ●
1,800 mm ● ● ● ●
1,900 mm ● ● ● ●
2,000 mm ● ● ● ●
54 55 |
OWS RAPTOR + BSN-LED
OWS
Single reflector
OWS-MR
Multiple reflector
OWS-X
Xenon double flashFront flasher
12 / 24 V 12 / 24 V 12 / 24 V 12 V Multi-voltage 9 – 32 V
● – –●
598 mm–
– – – – –
● – ● – –
– – –●
1,118 mm–
– – –●
1,248 mm–
– – – – –
●●
1,424 mm● – –
– – – – –
● – ● – –
– – – – –
– – – – –
– – – – –
– – – – –
OPTICAL WARNING SYSTEMS
MODULES OWS7
Fully modular from the basic version to maximum features.
Main beacons Alley lights Worklights (ASW) Hazard warning
� LED KL-LM 2: 360 ° module, flashing warning signal, high-power LEDs arranged in a semi-circle
� LED KL-LM 4: like LED KL-LM 2 module, rotating warning signal
� LED KL-LR 2: flash module, reflector in trough formation, option to use front and rear signal separately
� KL-ER: classic halogen rotating-mirror module
� with 4 LEDs
� Intensive close-range illumination along the side
� 12 V-Version with H3 bulbs
� 24 V-Version with H9 bulbs
� Also available in LED technology
� Multiple light assembly possible
� To the front, to the fror to the rear
� LED module with pointensity
� Synchronisation withindicators possible wused
� For installation undedome
� Ready for any use
� Housing widths from 900 mm to 2,000 mm (in 100 mm steps)
� 12 or 24 V
56 57 |
warning lightsChaser signal:LED signal bar (LSB)
Light dome(depending on light module) Panels
the front and rear,
with powerful light
on with the vehicle sible when ZSE is
n under the light
� Integrated amber chaser signal for rearward warning and security
� Traffic control possible thanks to different signal directions
� Daytime / night-time mode switchable via control unit
� Please observe country-specific regulations during use
� Transparent � Amber
� Milky white � Transparent amber � Transparent clear
Beyond a width of 1,200 mm, partitions are installed in order to cascade the panels.
Configure your individual OWS 7 here: www.hella.com/ows7
OPTICAL WARNING SYSTEMS
OWS 7 TECHNICAL DETAILS
Designation Abbreviation
Halogen single-reflector system KL-ER
LED parabolic trough system KL-LR2
360° LED module, Flash function, High-power LEDs arranged in a semi-circle
KL-LM2
360° LED module, Rotating light function,High-power LEDs arranged in a semi-circle
KL-LM4
Lighting technologies:
Technical specifications KL-ER KL-LR2 KL-LM2 KL-LM4
Operating temperature range -40°C to +60°C -40°C to +60°C -40°C to +60°C -40°C to +60°C
Interference suppression Conducted class 5 (CISPR 25)
Conducted class 5 (CISPR 25)
Conducted class 5 (CISPR 25)
Conducted class 5 (CISPR 25)
Light source H1 / 55 W LED LED LED
Nominal voltage (UN) 12 V / 24 V 12 V / 24 V 12 V / 24 V 12 V / 24 V
Current consumption 2 x 5 A / 2 x 3 A 2 x 3.0 A / 2 x 1.5 A 2 x 3 A / 2 x 1.5 A 2 A / 1 A
Approvals DIN 14620 035717 DIN 14620 035717 DIN 14620 035717 DIN 14620 035717
Type approval
Technical light homologation TA1 002 380 (ECE-R65)
TA1 002 379 (ECE-R65)
TA1 003232 (ECE-R65)
TA1 003232 (ECE-R65)
EMC compatibility 035 717 035 717 035717 035717
58 59 |
OWS 7 ACCESSORIES AND SPARE PARTS
SPARE PARTS FOR... Designation Purchase number
ER moduleDome, amberwithout cut-out 9EL 172 563-221
ER moduleDome, amberWith cut out 9EL 172 563-321
LED modulesDome, amberwithout cut-out 9EL 172 563-351
LED modulesDome, amberWith cut out 9EL 172 563-251
KL-ER Halogen module 2RL 864 233-001
KL-ER Drive belt 9XR 010 493-001
KL-LR2 Amber (LED) module 2XD 171 061-051
12 V. alley lights, white 2XD 176 235-001
12 V, worklights (halogen) 1GA 010 467-001
Rubber base 900 mm, cambered 9GD 175 947-001
Rubber base 1,000 mm, cambered 9GD 175 947-011
Rubber base 1,100 mm, cambered 9GD 175 947-021
Rubber base 1,200 mm, cambered 9GD 175 947-031
Rubber base 1,300 mm, cambered 9GD 175 947-041
Rubber base 1,400 mm, cambered 9GD 175 947-051
Rubber base 1,500 mm, cambered 9GD 175 947-061
Rubber base 1,600 mm, cambered 9GD 175 947-071
Rubber base, flat 9GD 176 514-871
LSB operating unit for OWS7 (inc. cable) 9SX 178 258-001
KL-ER H1 bulb, 12 V / 55 W 8GH 002 089-131
OPTICAL WARNING SYSTEMS
OWS 7 ORDER GUIDE
1. CHOOSE THE WIDTH OF OWS YOU REQUIRE
Available widths in mm
� 900 mm � 1,000 mm � 1,100 mm � 1,200 mm � 1,300 mm � 1,400 mm
� 1,500 mm � 1,600 mm � 1,700 mm � 1,800 mm � 1,900 mm � 2,000 mm
2. SELECT THE CORRECT VOLTAGE
Available variants � 12 V � 24 V
3. CHOOSE A LIGHTING SYSTEM
Colour: amber
On request, there are also modules available in the colours blue and red.
� Single reflector module (KL-ER) � LED trough parabolic module (KL-LR2) � LED module, flashing (KL-LM2) � LED module, rotating (KL-LM 4)
4. DO YOU NEED ADDITIONAL LIGHT MODULES UNDER THE DOME?
Alley lights � Using LED technology for close-range illumination along the
side.
Amber indicators
(2 x 110 mm)
Please note that in one installation position either an indicatoror a worklight can be installed, not both.
� In LED technology � to the front � to the rear � to the front and rear
Worklights
Please note that in one installation position either an indicatoror an LED worklight can be installed, not both.
5. CHOOSE ELEMENTS FOR THE CENTRAL SECTION OF THE OWS 7. This is only possible when a transparent central cover is chosen.
LED signal bar
(LSB)
� 5 LED flash modules � 6 LED flash modules � 8 LED flash modules
The number depends on the width!ECE regulations must be heeded!
Worklights
(Halogen) � Worklight with halogen technology � Close-range illumination, 5,000 cd
60 61 |
6. CUSTOM-MADE DESIGN POSSIBILITIES FOR THE CENTRAL COVER
Choose a colour for the central cover
The selection of central cover allows the integration of further light modules and functions in the central section. The selection of a white central cover allows additional backlighting, and a printing option.
� Milky white � Transparent amber � Transparent blue � Transparent clear
Do you need the white
central cover to be illuminated?
Use only possible in connection with a white cover, no further elements (see item 4) can be installed in the central section!
Illumination of the advertising space � Yes � No
(Use only in as far as permitted by legislation – not approved for use on public roads in Germany, Austria and Switzerland.)
7. CHOOSE THE SYSTEM CONTROL
Analogue control
When analogue control is chosen, individual switches can be used. The LED signal bar can only be triggered via a special control unit.
Digital control
Digital control of the OWS is carried out by CANopen in accordance with CIA 447. The control units HA 112 (German) or HA 115 (international) are available for this type of control.
8. WHAT KIND OF ATTACHMENT DO YOU NEED?
Mounting system for permanent attachment to straight
roofs and car roof tops
Comprising 2 strips of 2,000 mm to be cut down to system width and 2 pieces of cellular rubber as side-screens.
Permanent attachment on curved roofs
Standard rubber base for slightly curved roofs,Lengths in accordance with the OWS lengths - 1,000 – 2,000 mm.
Installation systems for fastening the roof railing Assembly for upright railing
Configure your own individual OWS7 at:www.hella.com/ows7
OPTICAL WARNING SYSTEMS
OWS 7 CONFIGURATION EXAMPLES
OWS7 with KL-ER single-reflector system
Part number Width Alley light Worklights V
2RL 010 710-101 900 mm – – 12 V
2RL 010 710-111 1,000 mm – – 12 V
2RL 010 710-121 1,100 mm – – 12 V
2RL 010 710-131 1,400 mm – – 12 V
2RL 010 710-141 1,600 mm – – 12 V
2RL 010 710-201 1,000 mm x – 12 V
2RL 010 710-211 1,100 mm x – 12 V
2RL 010 710-221 1,400 mm x – 12 V
2RL 010 711-291 1400 mm – 2 rear 24 V
OWS7 with KL-LR2 LED trough parabolic system
Part number Width Alley light Worklights V
2RL 010 710-151 900 mm – – 12 V
2RL 010 710-161 1,000 mm – – 12 V
2RL 010 710-231 1,000 mm x – 12 V
2RL 010 710-171 1,100 mm – – 12 V
2RL 010 710-241 1,100 mm x – 12 V
2RL 010 710-181 1,400 mm – – 12 V
2RL 010 710-251 1,400 mm x – 12 V
2RL 010 710-271 1,400 mm x 2 rear 12 V
2RL 010 710-191 1,600 mm – – 12 V
2RL 010 710-261 1,600 mm x – 12 V
2RL 010 710-281 1,600 mm x 2 rear 12 V
Further versions on request.
62 63 |
OWS7 with KL-LM2 module
Part number Width Alley light Worklights LSB V
2RL 010 710-951 900 mm – – – 12 V
2RL 010 710-961 900 mm x – – 12 V
2RL 010 710-971 1000 mm – – – 12 V
2RL 010 710-981 1000 mm x – – 12 V
2RL 010 710-991 1000 mm x – 5 modules 12 V
2RL 010 711-001 1100 mm – – – 12 V
2RL 010 711-011 1100 mm x – – 12 V
2RL 010 711-021 1100 mm x – 6 modules 12 V
2RL 010 711-031 1200 mm – – – 12 V
2RL 010 711-041 1200 mm x – – 12 V
2RL 010 711-051 1200 mm x 1 rear – 12 V
2RL 010 711-061 1200 mm x 2 rear – 12 V
2RL 010 711-071 1200 mm x 1 rear, 1 front – 12 V
2RL 010 711-081 1200 mm x 2 rear, 2 front – 12 V
2RL 010 711-091 1400 mm – 1 rear – 12 V
2RL 010 711-101 1400 mm – 2 rear – 12 V
2RL 010 711-111 1400 mm x – – 12 V
2RL 010 711-121 1400 mm x 2 rear – 12 V
2RL 010 711-131 1400 mm x – 8 modules 12 V
2RL 010 711-301 1400 mm – – – 12 V
2RL 010 711-401 1400 mm – – – 24 V
2RL 010 711-141 1600 mm – – – 12 V
2RL 010 711-161 1600 mm x 2 rear – 12 V
2RL 010 711-181 1600 mm x 2 rear, 2 front – 12 V
2RL 010 711-191 1600 mm x 2 rear, 2 front 8 modules 12 V
2RL 010 711-271 1600 mm – – – 24 V
2RL 010 711-281 1600 mm x 2 rear – 24 V
2RL 010 711-201 1800 mm – – – 24 V
2RL 010 711-211 1800 mm x 2 rear – 24 V
2RL 010 711-221 1800 mm x 2 rear, 2 front – 24 V
2RL 010 711-351 2000 mm – – – 24 V
Further versions on request.
OWS 7 CONFIGURATION EXAMPLES
Configuration example with chaser signal and worklight.
OPTICAL WARNING SYSTEMS
THE ADVANTAGES AT A GLANCE:
� 4 different width variants and 3 different light systems to be selected in 12 or 24 V versions – the suitable solution for every vehicle roof
� Wide range of housing panels with additional functions available for retrofitting
� Custom-made design possibilities thanks to illumination of and lettering on the central cover (use only in as far as permitted by legislation – not approved for use on public roads in Germany, Austria and Switzerland)
� Various attachment options – e.g. using rubber base or support systems
� Triggering is by means of individual switches
OWS OPTICAL WARNING SYSTEM
TYPE APPROVAL
Lighting technology homologation, OWS 00817, (ECE-R65)
Lighting technology homologation, OWS-X 006517, (ECE-R65)
Lighting technology homologation, OWS-MR 006516, (ECE-R65)
EMC compatibility 031309
TECHNICAL SPECIFICATIONS
Nominal voltage (UN) 12 V 24 V
Operating voltage (UB), OWS / OWS-MR 10.8 – 13.8 V 21.6 – 27.6 V
Operating voltage (UB),OWS-X 10 – 15 V 20 – 30 V
Operating temperature range -40°C to +60°C
Interference suppression Conducted class 5 (CISPR 25)
Current consumption
Lighting central panel,only with OWS 4 A 2 A
Current consumption OWS-X 2 x 3.5 A 2 x 1.6 A
Current consumption OWS / OWS-MR 2 (4) x 4.7 A 2 (4) x 2.7 A
Engine speed, OWS / OWS-MR 160 U/min
Flashing frequency, OWS-X 2 Hz double flash
Electrical flashing energy, OWS-X 10 + 2 Ws
Protection categoryIP 5K4K, IP X9K
(resistant to dust and high-pressure jet cleaners)
64 65 |
OWS – RANGE OVERVIEW
OWS 540 RETROFITTING POSSIBLE
Single reflector 12 V, amber24 V, gelb12 V, blau24 V, blau
2RL 007 900-501
2RL 007 900-511
2RL 007 900-551
2RL 007 900-561
–
Single reflector with magnetic mounting bracket12 V, gelb12 V, blau
2RL 007 900-521
2RL 007 900-571–
OWS 1.000 RETROFITTING POSSIBLE
Single reflector 12 V, amber12 V, blau
2RL 007 900-001
2RL 007 900-1519HB 862 827-031
Xenon double flash 12 V, amber12 V, blau
2RL 007 900-121
2RL 007 900-1719HB 862 827-041
OWS 1.400 RETROFITTING POSSIBLE
Single reflector 12 V, amber24 V, gelb12 V, blau
2RL 007 900-201
2RL 007 900-211
2RL 007 900-251
9HB 862 827-011
9HB 862 827-051
9HB 862 827-071
9HB 862 827-091
Xenon double flash 12 V, amber24 V, gelb12 V, blau
2RL 007 900-221
2RL 007 900-241
2RL 007 900-271
Multiple reflector 1,424 mm12 V, amber 2RL 007 900-701
OWS 1.600 RETROFITTING POSSIBLE
Single reflector 12 V, amber24 V, gelb12 V, blau
2RL 007 900-601
2RL 007 900-611
2RL 007 900-651 9HB 862 827-021
9HB 862 827-061
9HB 862 827-081
Xenon double flash 24 V, amber12 V, blau
2RL 007 900-631
2RL 007 900-681
Worklights3. Stop light Direction indicator
INSTALLATION Purchase number Product photo OWS 540
OW
S/-
X
1,0
00
OW
S/-
X
1,4
00
OW
S/-
X
1,6
00
Rubber basefor mounting on slightly curved vehicle roofs 9GD 862 080-001 Included as part
of the scope of delivery
(see spare parts for part numbers)for mounting on strongly curved vehicle roofs
9GD 862 080-011
9GD 862 081-001
9GD 862 085-001
X
X
X
Bracketfor direct mounting
9XD 861 990-001
9XD 861 990-011
9XD 861 990-021
X
X
X
Carrierfor welding onto existing supports (for use under the OWS or the bracket for direct mounting (9XD 861 990-...)
9XD 861 995-801 X X X
Fixed installationAttachment set (for screwing under the bracket for direct mounting (9XD 861 990-...)
9XD 857 445-801 X X X
INTERIOR LIGHTING
Bulb holderinc. bulbs for backlighting the housing
12 V, 9FT 861 790-001*
24 V,9FT 861 790-011*
OWS OWS OWS
CONTROL
Switcheswith integrated warning light (for connection to the control unit)
6ED 004 778-001
Switch with warning light 1 each for interior lights, 1 each for beacon operation (to be ordered separately)
6ED 004 778-011 X X X X
Switch with location lighting1 required per lighting function 6EH 007 832-011 X X X X
Control unit � For functional monitoring of rotary beacons and flashing
beacons � Indicates beacon failure
12 V, 5KG 007 629-001
24 V, 5KG 007 629-011
Pull-and-turn alarm switch � With three or four switch settings � For optical and acoustic signal
Police, 4 switch settings
12 V, 6ZE 001 759-051
24 V, 6ZE 001 759-061
Fire brigade / ambulance / civil defence and disaster control, 3 switch settings
12 / 24 V,6ZE 001 759-071
Installation framefor 6 switches (installation opening 156.1 x 48.2 mm)
for 3 switches (installation opening 77.6 x 48.2 mm)
8HG 713 626-001 X X X X
8HG 714 504-001 X X X X
Installation frame insertion systemEnd piece (10 pcs.) 8HG 716 734-001 X X X X
Intermediate piece (10 pcs.) 8HG 716 735-001 X X X X
Cover (10 pcs.)for sealing switch installation openings in the installation strip insertion system
9HB 713 629-001 X X X X
* Use of the central panel lighting only as far as permitted by legislation. Not permitted in Germany, Austria and Switzerland.
ACCESSORIES AND SPARE PARTS
OWS – ACCESSORIES
66 67 |
SPARE PARTS OWS
H1 bulb, 12 V / 55 W 8GH 002 089-133
H1 bulb, 24 V / 70 W 8GH 002 089-251
Reflector 9DX 861 976-001
Plastic reflector for older OWS models built up to 2002
9DX 861 872-001
Metal reflector 9DX 862 849-001
Motor 12 / 24 V, inc. worm gear 9MN 860 677-021
Dome blue, left 9EL 861 912-021
Dome blue, right 9EL 861 913-021
Dome red, left 9EL 861 912-061
Dome red, right 9EL 861 913-061
Dome amber, left 9EL 861 912-001
Dome amber, right 9EL 861 913-001
Rubber base OWS 540 9GD 862 086-001
Bulb for bulb holder, 12 V / 55 W 8GP 003 594-121
Bulb for bulb holder, 24 V / 70 W 8GP 003 594-251
Plastic cover rear white, for OWS 1.000 9EL 861 498-001
Plastic cover rear white, for OWS 1.400 9EL 861 498-011
Plastic cover rear white, for OWS 1.600 9EL 861 498-021
SPARE PARTS OWS-X
X1 standard flash tube 12 V 8GS 859 634-001
Xenon double-flash module 12 V 2RL 863 106-001
Xenon double-flash module 24 V 2RL 863 106-011
Dome blue, left 9EL 861 912-051
Dome blue, right 9EL 861 913-051
Dome red, left 9EL 861 912-061
Dome red, right 9EL 861 913-061
Dome amber, left 9EL 861 912-041
Dome amber, right 9EL 861 913-041
Plastic cover rear white, for OWS 1.000 9EL 861 498-001
Plastic cover rear white, for OWS 1.400 9EL 861 498-011
Plastic cover rear white, for OWS 1.600 9EL 861 498-021
SPARE PARTS OWS-MR
H1 bulb, 12 V / 55 W 8GH 002 089-133
Dome, left 9EL 861 912-001
Dome, right 9EL 861 913-001
OWS – SPARE PARTS
� Page 65
� Page 65
� Page 65
Halogen single reflector system (OWS)
Xenon double flash system (OWS-X)
Multiple reflector (OWS-MR)
Lighting functions 100% LED
� In addition to the main lighting modules, the auxiliary alley light and LED signal bar are also based on current LED technology
Safety
� Best warning effectiveness thanks to focused signal radiation.
� Signals can thus guide traffic past a hazardous spot following an accident, for example, or radiate an additional warning signal to the rear.
Aerodynamics
� Minimum overall height makes optimised air resistant coefficients possible as well as access where there is little headroom.
Economical
� Extreme service life, low current consumption of the LED technology and reduced fuel consumption thanks to the ultra-flat design.
TYPE APPROVAL
Technical light homologation TB1 002989
EMC protection 035947
TECHNICAL SPECIFICATIONS
Nominal voltage (UN) 12 V
Operating temperature range -40°C to +60°C
Interference suppression Conducted class 5 (CISPR 25)
Protection category IP 5K4K, IP X9K (DIN 40050, Part 9)
OPTICAL WARNING SYSTEMS
Additional functions
� Top functionality in every situation thanks to the auxiliary functions: chaser signal to the rear (LED signal bar) and road illumination alongside the vehicle (Alley Lights).
Installation
� Flexible installation possibilities: choose from three different bracket systems.
* Use of LSB only as far as permitted by legislation. Please heed national regulations.
RAPTOR +
68 69 |
RAPTOR + (598 MM) MODULE EQUIPMENT
12 V, accessories required 1 switch 2RL 010 743-141
12 V, accessories required 1 switch 2RL 010 743-001
RAPTOR + (1,118 MM) MODULE EQUIPMENT
12 V, accessories required 1 switch 2RL 010 743-011
12 V, with alley light, necessary accessories 3 switches 2RL 010 743-101
12 V, with LSB and alley light, necessary accessories: 4 switches and 1 control unit 2RL 010 743-111
12 V, accessories required 1 switch 2RL 010 743-091
12 V, with alley light, necessary accessories 3 switches 2RL 010 743-051
12 V, with LSB, necessary accessories: 2 switches and 1 control unit 2RL 010 743-041
12 V, with LSB and alley light, necessary accessories: 4 switches and 1 control unit 2RL 010 743-061
RAPTOR + (1,248 MM) MODULE EQUIPMENT
12 V, accessories required 1 switch 2RL 010 743-161
12 V, accessories required 1 switch 2RL 010 743-151
12 V, with alley light, necessary accessories 3 switches 2RL 010 743-121
12 V, with LSB and alley light, necessary accessories: 4 switches and 1 control unit 2RL 010 743-131
12 V, accessories required 1 switch 2RL 010 743-021
12 V, with alley light, necessary accessories 3 switches 2RL 010 743-071
12 V, with LSB, necessary accessories: 2 switches and 1 control unit 2RL 010 743-031
12 V, with LSB and alley light, necessary accessories: 4 switches and 1 control unit 2RL 010 743-081
Main beacons LSB modules Alley lights
INSTALLATION Purchase number Product photo
59
8 m
m
1,1
18
mm
1,2
48
mm
Standard bracket system4 attachment screws, 4 attachment bases made of rubber, 4 washers and 4 M8 threaded nuts.
included in the scope of supply
Angled bracket system2 stainless steel brackets including attachment material 8HG 168 011-001 X X X
RAPTOR +
ACCESSORIES AND SPARE PARTS
CONTROL Purchase number Product photo
59
8 m
m
1,1
18
mm
1,2
48
mm
Switcheswith location lighting 6EH 007 832-011 X X X
Installation frame for 3 switches(installation opening 77.6 x 48.2 mm) 8HG 714 504-001 X X X
Installation frame insertion systemEnd piece (10 pcs.) 8HG 716 734-001 X X X
Intermediate piece(10 pcs.) 8HG 716 735-001 X X X
Cover (10 pcs.)for sealing switch installation openings in the installation strip insertion system
9HB 713 629-001 X X X
LSB control unitfor triggering the chaser signal LED signal bar (LSB)
� Display, selection and activation of the programmed flashing sequences
� Day / night mode switching � Switching of the flashing sequence speed from standard to fast
9SX 178 258-001 – X X
70 71 |
� Multi-voltage 12 / 24 V � Surface-mounted and flush-mounted variants
� Top-quality lighting engineering
Optimum signalling effect thanks to a combination of 4 power LEDs and a high-quality precision lens. The following signals can be selected: – 10 flashing sequences inc. one random flashing sequence HELLA Random-Flash, – synchronous or alternating signal – or 100 Hz permanent signal
� Top-quality workmanship
The high-grade metal housing is connected to the lens through a safely dimensioned adhesive bed. This workmanship makes it a guaranteed waterproof signal module for the toughest of demands.
� Top-quality installation
Vehicle-specific versions for the high-volume models MB Vito, MB Sprinter and VW T5 make precise installation in the defined environment easier. Flush-mounted and surface-mounted versions are available as additional universal solutions for all further applications.
BSN-LED FRONT FLASHER
TYPE APPROVAL
Technical light homologation Blue: ECE R65 x B1 002796
EMC protection 035615
TECHNICAL SPECIFICATIONS
Multi-voltage 9 to 32 V
Current consumption Average current consumptionper light0.8 A at 12 V input voltage0.4 A at 24 V input voltage
Dimensions 131 x 50 x 26 mm
Operating temperature range -40°C to +60°C
Interference suppression in accordance with VDE 0879 Part 3, VHF 5
Overvoltage protection Cut-off in the event of overvoltage >36 V
Protection category IP 5K4K / IPX 9Kaccording to DIN 40050 Part 9
Contacting AMP plug
BSN-LED FRONT FLASHER
Multi-voltage 9 – 32 V, blue 2XD 010 312-801
Multi-voltage 9 – 32 V, amber 2XD 010 312-811*
* No ECE approval – use as far as permitted by legislation. Not approved for road traffic in Germany, Austria and Switzerland.
ACCESSORIES: INSTALLATION BRACKET
Attachment set, universal, for flush-mounting 9XD 177 843-801
Attachment set, universal, for surface-mounting
9XD 177 844-801
Attachment set, vehicle-specific for MB Vito
9XD 177 842-801
Attachment set, vehicle-specific for MB Sprinter and VW Crafter
9XD 177 840-801
Attachment set, vehicle-specific for VW T5
8HG 184 521-001
Working at night or in the dark is no problem – providing you have the right lights to work with!
HELLA worklights generate really suitable light for the working area. Their development has been specifically aimed at illuminating an as large an area as possible with a soft transition area at the edge.
Worklights can be installed in the most varied of areas and environments. Whether in long-distance or close-range traffic, on construction vehicles, hazardous goods transporters, towing or municipal vehicles.
Ensuring that you have more visibility and can work in a precise and safe manner in the dark.
WORKLIGHTS - INTRO
72 73 | |
WORKLIGHTS
1G0 996 276-... -481 -071
V 9 – 33 10 – 100
Close-range illumination ■ ■
Flush-mounting
Upright mounting ■ ■
Suspended mounting ■ ■
More features Ultra-broad illumination
Recommended inclination angle: close-range: 10°
Module 70 LED Generation III
Good lighting in a compact design, IP 6K9K / IP 67 (pressure cleaner-proof / immersible), reverse polarity protection, overvoltage protection, overheating protection, high-quality aluminium housing, E1 approved, light colour: 5,700 Kelvin.
30% more light than Generation II
1GA 996 661-... -001 -011
V 9 – 33 9 – 33
Close-range illumination ■
Long-range illumination ■
Upright mounting ■ ■
Suspended mounting ■ ■
Oval 100 LED
IP 6K9K / IP 67 (pressure cleaner-proof / immersible), reverse polarity protection, overvoltage protection, overheating protection, high-quality aluminium housing, E1 approved, oval design to suit the modular Oval 100 series, enables retrofitting to maintenance-free worklight, light colour: 5,700 Kelvin.
Recommended inclination angle: close-range: 12° long: 5°
LED WORKLIGHTS
74 75 |
1GA 995 193-... -001 -021
V 9 – 33 9 – 33
Close-range illumination ■ ■
Upright mounting ■ ■
Suspended mounting
More features Standard holder Wall-mounted
Flat Beam 500
Only 7 W power requirement - extremely efficient, IP 6K9K / IP 67 (pressure cleaner-proof/ immersible), reverse polarity protection, overvoltage protection, overheating protection, impact-proof plastic housing, E1 approved, light colour: 5,700 Kelvin, standard 45° illumination.
Recommended inclination angle: 0°
1GD 996 193-... -001 -051
V 9 – 33 9 – 33
Close-range illumination ■ ■
Upright mounting ■ ■
More features Wall-mounted 45° illumination
Flat Beam 1000
Extremely flat design and highly-efficient, IP 6K9K / IP 67 (pressure cleaner-proof / immersible), reverse polarity protection, overvoltage protection, overheating protection, impact-proof plastic housing, E1 approved, light colour: 5,700° Kelvin 45° illumination takes light to the near-field workspace without tilting the worklight.
1GD 996 193-051 = 45° illumination
Recommended inclination: Standard: 45°, illumination: 0°
LED WORKLIGHTS
1GA 996 188-... -001 -011
V 9 – 33 9 – 33
Close-range illumination ■ ■
Upright mounting ■ ■
Suspended mounting ■ ■
Heavy duty ■
More features Surrounding bracket
Power Beam 1000
Strong lighting output in an elegant design, IP 6K9K / IP 67 (pressure cleaner-proof / immersible), reverse polarity protection, overvoltage protection, overheating protection, high-quality aluminium housing, GGVSEB / ADR, E1 approved, light colour: 5,700° Kelvin.
Recommended inclination angle: close-range: 12°
1GA 996 288-... -001 -011
V 9 – 33 9 – 33
Close-range illumination ■
Long-range illumination ■
Heavy duty
More features
Power Beam 1500
IP 6K9K / IP 67 (pressure cleaner-proof / immersible), reverse polarity protection, overvoltage protection, overheating protection, high-quality aluminium housing, E1 approved, for heavy duty use, light colour: 5,700° Kelvin.
Recommended inclination angle: close-range: 10° long: 5°
WORKLIGHTS
LED WORKLIGHTS
76 77 |
1GA 996 189-... -001 -061
V 9 – 33 9 – 33
Close-range illumination ■ ■
Long-range illumination
Upright mounting ■ ■
Suspended mounting
More features With handle, pipe-socket attachment
Recommended inclination angle: close-range: 12° long: 3°
Power Beam 2000
Strong lighting output comparable with xenon, IP 6K9K / IP 67 (pressure cleaner-proof / immersible), reverse polarity protection, overvoltage protection, overheating protection, high-quality aluminium housing, E1 approved, light colour: 5,700° Kelvin.
1GA 996 192-... -001 -051
V 9 – 33 9 – 33
Close-range illumination ■ ■
Long-range illumination
Flush-mounting
Upright mounting ■ ■
Heavy duty
More features With handle, pipe-socket attachment
Power Beam 3000
Extremely strong light output, exceeds xenon levels, IP 6K9K / IP 67 (pressure cleaner-proof / immersible), reverse polarity protection, overvoltage protection, overheating protection, high-quality aluminium housing, E1 approved, light colour: 5,700° Kelvin.
Recommended inclination angle: close-range: 12° long: 3°
LED WORKLIGHTS
1GB 996 194-... -001 -011
V 9 – 33 9 – 33
Close-range illumination ■ ■
Upright mounting ■ ■
Suspended mounting ■ ■
Heavy duty ■ ■
More features Surrounding bracket Surrounding bracket
Power Beam 5000
For extreme applications, IP 6K9K / IP 67 (pressure cleaner-proof / immersible),reverse polarity protection, overvoltage protection, overheating protection, high-quality aluminium housing, E1 approved, light colour: 5,700° Kelvin.
Recommended inclination angle: close-range: 10°
1GA 996 288-... -061 -091
V 9 – 33 9 – 33
Reversing close-range illumination ■ ■
Upright mounting ■ ■
Suspended mounting ■ ■
Heavy duty ■ ■
More features Surrounding bracket Surrounding bracket
145,3
112,3
120,2
61,6
Power Beam 1000 reversing spotlight
IP 6K9K / IP 67 (pressure cleaner-proof / immersible), reverse polarity protection, overvoltage protection, overheating protection, high-quality aluminium housing, E1 approved, for heavy duty use, approved special illumination as RFSW 00AR, light colour: 5,700° Kelvin.
Recommended inclination angle: according to installation instructions
WORKLIGHTS
LED WORKLIGHTS
78 79 |
1GA 996, 288- -431 -451
V 12 24
Close-range illumination ■ ■
Upright mounting ■ ■
Lighting material D1S D1S
Ultra Beam X-Powerpack D1S
Xenon worklight, compact design with integrated ballast, IP 6K9K (pressure cleaner-proof / immersible), fibreglass-reinforced plastic housing, fixing made of stainless steel, electronics in the aluminium housing, light colour: 4,150° Kelvin.
1GA 996 196-... -001 -011
V 12 24
Close-range illumination ■ ■
Long-range illumination
Upright mounting ■ ■
Suspended mounting ■ ■
Lighting material D1S D1S
PowerXen D1S
Light xenon all-round worklight, integrated ballast, IP 6K9K / IP 67 (pressure cleaner-proof / immersible), impact-proof plastic housing, fixing made of stainless steel, light colour: 4,150° Kelvin.
Recommended inclination angle: close-range: 15° long: 5°
XENON WORKLIGHTS
Recommended inclination angle: close-range: 12°
Double Beam H3
IP 5K4K (splash water-proof), impact-proof, fibreglass-reinforced plastic housing, GGVSEB / ADR, intensive lighting thanks to double reflectors, suitable for transportation of hazardous goods, light colour: 2,500° Kelvin.
Recommended inclination angle: close-range: 12° long: 5° off-road: 5°
1GA 006 991-... -051 -091
V 12 / 24 12 / 24
Close-range illumination ■
Long-range illumination ■
Off-road illumination
Upright mounting ■ ■
Suspended mounting ■ ■
More features
WORKLIGHTS
HALOGEN WORKLIGHTS
1G0 996 176-... -001 -111
V 12 / 24 12 / 24
Close-range illumination ■ ■
Long-range illumination
Upright mounting ■
Suspended mounting ■
Module 70 H3
Compact – smaller design space. IP 5K9K (pressure cleaner-proof / immersible), impact-proof, fibreglass reinforced plastic housing, light colour: 2,500° Kelvin.
Recommended inclination angle: close-range: 10° long: 5°
80 81 |
1GA 007 506-... -001 -011
V 12 / 24 12 / 24
Close-range illumination ■ ■
Long-range illumination
Upright mounting ■ ■
Suspended mounting ■ ■
Heavy duty ■
Ultra Beam H3
The classic worklight. IP 6K9K (pressure cleaner-proof / immersible), impact-proof, fibreglass reinforced plastic housing, connection foot as per DIN EN ISO4165, GGVSEB / ADR, light colour: 2,500° Kelvin.
Recommended inclination angle: close-range: 15° long: 5°
2ZR 997 506-... -391 -621
V 24 24
Reversing close-range illumination ■
Reversing long-range illumination ■
Reversing off-road illumination
Upright mounting ■ ■
Heavy duty ■ ■
Ultra Beam H3 reversing headlight
Reversing headlight, IP 5K9K (pressure cleaner-proof / immersible), impact-proof, fibreglass reinforced plastic housing, authorised special illumination as a reversing light, GGVSEB / ADR, light colour: 2,300° Kelvin.
Authorised special lighting as reversing headlight 00AR.
Inclination angle: according to installation instructions
HALOGEN WORKLIGHTS
Module 70 LED Generation III
Close-range
� Page 74
Oval 100 LED
Close-range
� Page 74
Flat Beam 500
Close-range
� Page 75
Flat Beam 1000
Close-range
� Page 75
Power Beam 1000
Close-range
� Page 76
Power Beam 1500
Close-range
� Page 76
Power Beam 2000
Close-range
� Page 77
Power Beam 3000
Close-range
� Page 77
Power Beam 5000
Close-range
� Page 78
WORKLIGHTS
WORKLIGHTS – ISOLUX DIAGRAMS
82 83 |
Double Beam H3
Close-range
� Page 80
Ultra Beam H3
Close-range
� Page 81
Ultra Beam reversing spotlight
Close-range
� Page 81
Power Beam 1000 reversing spotlight
Close-range
� Page 78
PowerXen D1S
Close-range
� Page 79
Ultra Beam X-Powerpack D1S
Close-range
� Page 79
Module 70 H3
Close-range
� Page 80
LED
Xenon
Halogen
NOTES
84 85 |
NOTES
86 87 |
Welcome to our Original Equipment worlds.
Visit these websites to find out more about technology, new products and possibilitiesof equipping your vehicle:
HELLA WORLDS
www.hella.com/municipal
www.hella.com/agro
HELLA KGaA Hueck & Co.
Rixbecker Straße 7559552 Lippstadt, GermanyTel.: +49 2941 38-0Fax: +49 2941 38-7133Internet: www.hella.com
HELLA Limited
Wildmere Industrial EstateBanbury, Oxon OX16 3JUTel.: (01295) 225600Fax: 0800 7832571E-mail: [email protected]: www.hella.co.uk
HELLA Asia Singapore Pte Ltd
Regional Headquarters Asia Pacifi cIndependent A� ermarket2 International Business Park#02-12 The StrategySingapore 609930Tel: +65 6854 7300Fax: +65 6854 7302E-mail: [email protected]: www.hellaasia.com
© HELLA KGaA Hueck & Co., Lippstadt9Z2 999 133-192 GR/01.13/4.2Printed in Germany
www.hella.com/municipal