BE Semester - 6,8 (Regular) & 5,7 (Remedial) …old.gtu.ac.in/examtimetable/S2018/be5678_z3.pdf001ADIT, Karamsad 02AUTOMOBILE ENGINEERING2180214Noise, Vibraton & Harshness And Safety12-05-2018

GUJARAT TECHNOLOGICAL UNIVERSITY

(Established under Gujarat Act No. 20 of 2007)

ESTD - 2007

No:GTU/BE5678/Pract/Summer Exam 2018/ 13-Jun-18Date :

BE Semester - 6,8 (Regular) & 5,7 (Remedial) Practcal Exam Time Table Summer Exam 2018

Zone : 3 (VV Nagar)Center Code Center Name Branch

CodeBranch Name Subject

CodeSubject Name Examdate

5Sem:

001 ADIT, Karamsad 02 AUTOMOBILE ENGINEERING 2151909 Heat Transfer 12-06-20186Sem:

001 ADIT, Karamsad 02 AUTOMOBILE ENGINEERING 2160207 Alternatve fuel and power systems 12-06-2018

001 ADIT, Karamsad 02 AUTOMOBILE ENGINEERING 2160208 Automotve computer controlled Systems 14-06-2018

001 ADIT, Karamsad 02 AUTOMOBILE ENGINEERING 2161901 Dynamics of Machinery 09-06-2018

001 ADIT, Karamsad 02 AUTOMOBILE ENGINEERING 2161903 Computer Aided Design 11-06-2018

001 ADIT, Karamsad 02 AUTOMOBILE ENGINEERING 2161908 Refrigeraton and Air Conditoning 08-06-20187Sem:

001 ADIT, Karamsad 02 AUTOMOBILE ENGINEERING 170001 Project - I 11-05-2018

001 ADIT, Karamsad 02 AUTOMOBILE ENGINEERING 2170206 Vehicle Maintenance & Garage Practce 14-05-20188Sem:

001 ADIT, Karamsad 02 AUTOMOBILE ENGINEERING 2150208 Automotve Electrical Systems 12-05-2018

001 ADIT, Karamsad 02 AUTOMOBILE ENGINEERING 2161903 Computer Aided Design 14-05-2018

001 ADIT, Karamsad 02 AUTOMOBILE ENGINEERING 2171912 Oil Hydraulics & Pneumatcs 10-05-2018

001 ADIT, Karamsad 02 AUTOMOBILE ENGINEERING 2180201 Project – II 10-05-2018, 11-05-2018

001 ADIT, Karamsad 02 AUTOMOBILE ENGINEERING 2180206 Automobile system Design 10-05-2018, 11-05-2018

001 ADIT, Karamsad 02 AUTOMOBILE ENGINEERING 2180207 Applied Industrial Engineering In Automobile 14-05-2018

001 ADIT, Karamsad 02 AUTOMOBILE ENGINEERING 2180208 Computer Integrated Manufacturing In Automobile Industry

14-05-2018

001 ADIT, Karamsad 02 AUTOMOBILE ENGINEERING 2180214 Noise, Vibraton & Harshness And Safety 12-05-2018

001 ADIT, Karamsad 02 AUTOMOBILE ENGINEERING 2180215 Automotve And Combuston Engine Technology 12-05-20185Sem:

001 ADIT, Karamsad 06 CIVIL ENGINEERING 2150601 Highway Engineering 14-06-2018

001 ADIT, Karamsad 06 CIVIL ENGINEERING 2150602 Hydrology & Water Resources Engineering 12-06-2018

001 ADIT, Karamsad 06 CIVIL ENGINEERING 2150603 Environmental Engineering 12-06-2018

001 ADIT, Karamsad 06 CIVIL ENGINEERING 2150608 Structural Analysis-II 13-06-2018

001 ADIT, Karamsad 06 CIVIL ENGINEERING 2150609 Soil Mechanics 14-06-20186Sem:

001 ADIT, Karamsad 06 CIVIL ENGINEERING 2160601 Advanced Constructon and Equipments 07-06-2018

001 ADIT, Karamsad 06 CIVIL ENGINEERING 2160602 Applied Fluid Mechanics 08-06-2018

001 ADIT, Karamsad 06 CIVIL ENGINEERING 2160603 Railway, Bridge & Tunnel Engineering 11-06-2018

001 ADIT, Karamsad 06 CIVIL ENGINEERING 2160604 Water & Waste Water Engineering 12-06-2018

001 ADIT, Karamsad 06 CIVIL ENGINEERING 2160607 Elementary Structural Design 13-06-2018

001 ADIT, Karamsad 06 CIVIL ENGINEERING 2160608 Urban Transportaton system 14-06-2018

001 ADIT, Karamsad 06 CIVIL ENGINEERING 2160609 Computatonal Mechanics 14-06-20187Sem:

001 ADIT, Karamsad 06 CIVIL ENGINEERING 2170607 Design of Reinforced Concrete Structures 10-05-2018

Page 1 of 57

Center Code Center Name Branch Code

Branch Name Subject Code

Subject Name Examdate

001 ADIT, Karamsad 06 CIVIL ENGINEERING 2170609 Irrigaton Engineering 18-05-2018

001 ADIT, Karamsad 06 CIVIL ENGINEERING 2170612 Earthquake Engineering 10-05-20188Sem:

001 ADIT, Karamsad 06 CIVIL ENGINEERING 2180602 Harbour & Airport Engineering 19-05-2018

001 ADIT, Karamsad 06 CIVIL ENGINEERING 2180605 Project – II 18-05-2018

001 ADIT, Karamsad 06 CIVIL ENGINEERING 2180609 Foundaton Engineering 10-05-2018

001 ADIT, Karamsad 06 CIVIL ENGINEERING 2180610 Design of Steel Structures 14-05-2018

001 ADIT, Karamsad 06 CIVIL ENGINEERING 2180611 Constructon Management 16-05-2018

001 ADIT, Karamsad 06 CIVIL ENGINEERING 2180612 Design Of Prestressed Concrete Structures & Bridges

19-05-2018

5Sem:

001 ADIT, Karamsad 07 COMPUTER ENGINEERING 2150704 Object Oriented Programming using JAVA 11-06-20186Sem:

001 ADIT, Karamsad 07 COMPUTER ENGINEERING 2160701 Sofware Engineering 07-06-2018

001 ADIT, Karamsad 07 COMPUTER ENGINEERING 2160703 Computer Graphics 08-06-2018

001 ADIT, Karamsad 07 COMPUTER ENGINEERING 2160707 Advanced Java 11-06-2018

001 ADIT, Karamsad 07 COMPUTER ENGINEERING 2160708 Web Technology 12-06-2018

001 ADIT, Karamsad 07 COMPUTER ENGINEERING 2160711 .Net Technology 08-06-20188Sem:

001 ADIT, Karamsad 07 COMPUTER ENGINEERING 2180703 Artfcial Intelligence 10-05-2018

001 ADIT, Karamsad 07 COMPUTER ENGINEERING 2180706 Project (Phase-II) 11-05-2018

001 ADIT, Karamsad 07 COMPUTER ENGINEERING 2180709 Iot And Applicatons 14-05-2018

001 ADIT, Karamsad 07 COMPUTER ENGINEERING 2180710 Big Data Analytcs 14-05-2018

001 ADIT, Karamsad 07 COMPUTER ENGINEERING 2180713 Web Data Management 15-05-2018

001 ADIT, Karamsad 07 COMPUTER ENGINEERING 2180715 Android Programming 15-05-20186Sem:

001 ADIT, Karamsad 09 ELECTRICAL ENGINEERING 2160902 Power Electronics – II 13-06-2018

001 ADIT, Karamsad 09 ELECTRICAL ENGINEERING 2160904 High Voltage Engineering 14-06-2018

001 ADIT, Karamsad 09 ELECTRICAL ENGINEERING 2160908 Electrical Power system – II 11-06-2018

001 ADIT, Karamsad 09 ELECTRICAL ENGINEERING 2160909 Advance Microcontrollers 12-06-2018

001 ADIT, Karamsad 09 ELECTRICAL ENGINEERING 2160912 Design of DC Machines and Transformer 15-06-2018

001 ADIT, Karamsad 09 ELECTRICAL ENGINEERING 2160913 Control of Electrical Drives 12-06-20188Sem:

001 ADIT, Karamsad 09 ELECTRICAL ENGINEERING 2180901 Testng and Commissioning of Electrical Equipments

14-05-2018 15-05-2018

001 ADIT, Karamsad 09 ELECTRICAL ENGINEERING 2180903 Power System Planning and Design 14-05-2018 15-05-2018

001 ADIT, Karamsad 09 ELECTRICAL ENGINEERING 2180905 Project 17-05-2018 18-05-2018

001 ADIT, Karamsad 09 ELECTRICAL ENGINEERING 2180910 Energy Conservaton, And Audit 16-05-2018

001 ADIT, Karamsad 09 ELECTRICAL ENGINEERING 2180911 Power Quality And Management 16-05-20185Sem:

001 ADIT, Karamsad 11 ELECTRONICS & COMMUNICATION ENGINEERING

2151001 Microcontroller and Interfacing (EC) 15-06-2018


2151002 Engineering Electromagnetcs 11-06-2018


2151101 Audio Video Systems 12-06-2018

6Sem:


2161001 Digital Communicaton 08-06-2018

Page 2 of 57





2161003 Antenna & Wave Propagaton 11-06-2018


2161005 Optcal Communicaton 12-06-2018


2161006 Power Electronics Devices and Circuits 15-06-2018


2161101 VLSI Technology & Design 13-06-2018


2161102 Advanced Microprocessor 15-06-2018


2161103 Telecommunicaton Switching systems and Networks

15-06-2018

7Sem:


2171004 Wireless Communicaton 11-05-2018

8Sem:


2181102 Fundamental Of Image Processing 14-05-2018


2181103 Radar & Navigatonal Aids 14-05-2018


2181106 Device Driver & Writng 14-05-2018


2181107 Testng And Verifcaton 14-05-2018


2181108 Project II 11-05-2018

5Sem:

001 ADIT, Karamsad 14 FOOD PROCESSING TECHNOLOGY

2151406 Technology of Grains 11-06-2018

6Sem:


2161401 Food Process Equipment Design 11-06-2018


2161403 Food Engineering Operatons - II 12-06-2018


2161406 Food Refrigeraton & Air - Conditoning 13-06-2018


2161407 Food Plant Utlites & Sanitaton 14-06-2018


2161408 Food Fermentaton Technology 14-06-2018


2161409 Bakery and Confectonary Technology 15-06-2018

8Sem:


2181403 Industrial Project 15-05-2018


2181403 Industrial Project 16-05-2018

5Sem:

001 ADIT, Karamsad 16 INFORMATION TECHNOLOGY

2150002 Insttute Electve - Cyber Security 14-06-2018

Page 3 of 57





2150703 Analysis and Design of Algorithms 07-06-2018


2150704 Object Oriented Programming using JAVA 08-06-2018


2150708 System Programming 11-06-2018


2151603 Computer Graphics 15-06-2018

6Sem:


2160701 Sofware Engineering 07-06-2018


2160707 Advanced Java 08-06-2018


2160708 Web Technology 11-06-2018


2160711 .Net Technology 13-06-2018


2161603 Data Compression and data Retrival 12-06-2018


2161604 Image processing 13-06-2018

7Sem:


170703 Advance Java Technology 11-05-2018


171601 Data Warehousing And Data Mining 10-05-2018


171602 Distributed Database Applicaton & System 18-05-2018


171605 Enterprise Resource Planning 19-05-2018


2170710 Mobile Computng and Wireless Communicaton 16-05-2018


2170710 Wireless Communicaton and Mobile Programming

16-05-2018


2171607 Big Data Analytcs 17-05-2018

8Sem:


180703 Artfcial Intelligence 17-05-2018


180704 Advance Computer Networks 21-05-2018


181602 Data Compression 14-05-2018




2180709 Iot And Applicatons 15-05-2018


2180711 Python Programming 15-05-2018


2180715 Android Programming 15-05-2018


2181606 Project (Phase-II) 16-05-2018

5Sem:

001 ADIT, Karamsad 19 MECHANICAL ENGINEERING 2151902 Theory of Machines 07-06-2018

001 ADIT, Karamsad 19 MECHANICAL ENGINEERING 2151903 Fluid Power Engineering 11-06-2018

001 ADIT, Karamsad 19 MECHANICAL ENGINEERING 2151907 Design of Machine Elements 14-06-2018

001 ADIT, Karamsad 19 MECHANICAL ENGINEERING 2151908 Control Engineering 14-06-2018

Page 4 of 57




001 ADIT, Karamsad 19 MECHANICAL ENGINEERING 2151909 Heat Transfer 14-06-20186Sem:

001 ADIT, Karamsad 19 MECHANICAL ENGINEERING 2151909 Heat Transfer 14-06-2018

001 ADIT, Karamsad 19 MECHANICAL ENGINEERING 2161901 Dynamics of Machinery 07-06-2018

001 ADIT, Karamsad 19 MECHANICAL ENGINEERING 2161901 Dynamics of Machinery 07-06-2018, 08-06-2018

001 ADIT, Karamsad 19 MECHANICAL ENGINEERING 2161901 Dynamics of Machinery 09-06-2018

001 ADIT, Karamsad 19 MECHANICAL ENGINEERING 2161902 Internal Combuston Engines 11-06-2018, 12-06-2018, 13-06-2018

001 ADIT, Karamsad 19 MECHANICAL ENGINEERING 2161902 Internal Combuston Engines 13-06-2018

001 ADIT, Karamsad 19 MECHANICAL ENGINEERING 2161903 Computer Aided Design 13-06-2018

001 ADIT, Karamsad 19 MECHANICAL ENGINEERING 2161903 Computer Aided Design 14-06-2018, 15-06-2018

001 ADIT, Karamsad 19 MECHANICAL ENGINEERING 2161903 Computer Aided Design 15-06-2018

001 ADIT, Karamsad 19 MECHANICAL ENGINEERING 2161907 Industrial Engineering 07-06-2018

001 ADIT, Karamsad 19 MECHANICAL ENGINEERING 2161907 Industrial Engineering 07-06-2018, 08-06-2018, 09-06-2018

001 ADIT, Karamsad 19 MECHANICAL ENGINEERING 2161908 Refrigeraton and Air Conditoning 13-06-2018, 14-06-2018, 15-06-2018

001 ADIT, Karamsad 19 MECHANICAL ENGINEERING 2161908 Refrigeraton and Air Conditoning 14-06-2018

001 ADIT, Karamsad 19 MECHANICAL ENGINEERING 2161909 Producton Technology 11-06-2018

001 ADIT, Karamsad 19 MECHANICAL ENGINEERING 2161909 Producton Technology 11-06-2018, 12-06-2018, 13-06-2018

7Sem:

001 ADIT, Karamsad 19 MECHANICAL ENGINEERING 170001 Project - I 14-05-2018

001 ADIT, Karamsad 19 MECHANICAL ENGINEERING 2171901 Operaton Research 12-05-2018

001 ADIT, Karamsad 19 MECHANICAL ENGINEERING 2171909 Machine Design 12-05-2018

001 ADIT, Karamsad 19 MECHANICAL ENGINEERING 2171912 Oil Hydraulics & Pneumatcs 14-05-20188Sem:

001 ADIT, Karamsad 19 MECHANICAL ENGINEERING 2181909 Project – II 14-05-2018

001 ADIT, Karamsad 19 MECHANICAL ENGINEERING 2181915 Automobile Engineering 11-05-2018

001 ADIT, Karamsad 19 MECHANICAL ENGINEERING 2181920 Quality Engineering 12-05-2018

001 ADIT, Karamsad 19 MECHANICAL ENGINEERING 2181923 Entrepreneurship 10-05-20185Sem:

005 Babaria, Vadodara 06 CIVIL ENGINEERING 2150601 Highway Engineering 14-06-2018

005 Babaria, Vadodara 06 CIVIL ENGINEERING 2150602 Hydrology & Water Resources Engineering 12-06-2018

005 Babaria, Vadodara 06 CIVIL ENGINEERING 2150603 Environmental Engineering 12-06-2018

005 Babaria, Vadodara 06 CIVIL ENGINEERING 2150608 Structural Analysis-II 13-06-2018

005 Babaria, Vadodara 06 CIVIL ENGINEERING 2150609 Soil Mechanics 14-06-20186Sem:

005 Babaria, Vadodara 06 CIVIL ENGINEERING 2160601 Advanced Constructon and Equipments 07-06-2018

005 Babaria, Vadodara 06 CIVIL ENGINEERING 2160602 Applied Fluid Mechanics 08-06-2018

005 Babaria, Vadodara 06 CIVIL ENGINEERING 2160603 Railway, Bridge & Tunnel Engineering 11-06-2018

Page 5 of 57




005 Babaria, Vadodara 06 CIVIL ENGINEERING 2160604 Water & Waste Water Engineering 12-06-2018

005 Babaria, Vadodara 06 CIVIL ENGINEERING 2160607 Elementary Structural Design 13-06-2018

005 Babaria, Vadodara 06 CIVIL ENGINEERING 2160608 Urban Transportaton system 14-06-20187Sem:

005 Babaria, Vadodara 06 CIVIL ENGINEERING 2170607 Design of Reinforced Concrete Structures 18-05-2018

005 Babaria, Vadodara 06 CIVIL ENGINEERING 2170609 Irrigaton Engineering 21-05-2018

005 Babaria, Vadodara 06 CIVIL ENGINEERING 2170610 Professional Practces & Valuaton 17-05-2018

005 Babaria, Vadodara 06 CIVIL ENGINEERING 2170611 Infrastructure Engineering And Management 18-05-2018

005 Babaria, Vadodara 06 CIVIL ENGINEERING 2170613 Trafc Engineering 21-05-20188Sem:

005 Babaria, Vadodara 06 CIVIL ENGINEERING 2180605 Project – II 18-05-2018

005 Babaria, Vadodara 06 CIVIL ENGINEERING 2180607 Repairs & Rehabilitaton Of Concrete Structures 21-05-2018

005 Babaria, Vadodara 06 CIVIL ENGINEERING 2180609 Foundaton Engineering 10-05-2018

005 Babaria, Vadodara 06 CIVIL ENGINEERING 2180610 Design of Steel Structures 14-05-2018

005 Babaria, Vadodara 06 CIVIL ENGINEERING 2180610 Design of Steel Structures 15-05-2018

005 Babaria, Vadodara 06 CIVIL ENGINEERING 2180611 Constructon Management 16-05-2018

005 Babaria, Vadodara 06 CIVIL ENGINEERING 2180611 Constructon Management 17-05-20186Sem:

005 Babaria, Vadodara 07 COMPUTER ENGINEERING 2160701 Sofware Engineering 07-06-2018

005 Babaria, Vadodara 07 COMPUTER ENGINEERING 2160701 Sofware Engineering 08-06-2018

005 Babaria, Vadodara 07 COMPUTER ENGINEERING 2160703 Computer Graphics 11-06-2018

005 Babaria, Vadodara 07 COMPUTER ENGINEERING 2160707 Advanced Java 12-06-2018

005 Babaria, Vadodara 07 COMPUTER ENGINEERING 2160707 Advanced Java 13-06-2018

005 Babaria, Vadodara 07 COMPUTER ENGINEERING 2160708 Web Technology 14-06-2018

005 Babaria, Vadodara 07 COMPUTER ENGINEERING 2160708 Web Technology 15-06-2018

005 Babaria, Vadodara 07 COMPUTER ENGINEERING 2160711 .Net Technology 11-06-20188Sem:

005 Babaria, Vadodara 07 COMPUTER ENGINEERING 2180703 Artfcial Intelligence 10-05-2018

005 Babaria, Vadodara 07 COMPUTER ENGINEERING 2180703 Artfcial Intelligence 11-05-2018

005 Babaria, Vadodara 07 COMPUTER ENGINEERING 2180706 Project (Phase-II) 14-05-2018

005 Babaria, Vadodara 07 COMPUTER ENGINEERING 2180709 Iot And Applicatons 15-05-2018

005 Babaria, Vadodara 07 COMPUTER ENGINEERING 2180710 Big Data Analytcs 15-05-2018

005 Babaria, Vadodara 07 COMPUTER ENGINEERING 2180711 Python Programming 15-05-2018

005 Babaria, Vadodara 07 COMPUTER ENGINEERING 2180713 Web Data Management 15-05-2018

005 Babaria, Vadodara 07 COMPUTER ENGINEERING 2180715 Android Programming 15-05-20185Sem:

005 Babaria, Vadodara 09 ELECTRICAL ENGINEERING 2150002 Insttute Electve - Cyber Security 07-06-20186Sem:

005 Babaria, Vadodara 09 ELECTRICAL ENGINEERING 2160902 Power Electronics – II 11-06-2018, 12-06-2018

005 Babaria, Vadodara 09 ELECTRICAL ENGINEERING 2160904 High Voltage Engineering 11-06-2018, 12-06-2018

005 Babaria, Vadodara 09 ELECTRICAL ENGINEERING 2160908 Electrical Power system – II 13-06-2018, 14-06-2018

005 Babaria, Vadodara 09 ELECTRICAL ENGINEERING 2160912 Design of DC Machines and Transformer 13-06-2018, 14-06-2018

005 Babaria, Vadodara 09 ELECTRICAL ENGINEERING 2160913 Control of Electrical Drives 8-06-2018, 9-06-2018

8Sem:

Page 6 of 57




005 Babaria, Vadodara 09 ELECTRICAL ENGINEERING 2180901 Testng and Commissioning of Electrical Equipments

16-05-2018 17-05-2018 18-05-2018

005 Babaria, Vadodara 09 ELECTRICAL ENGINEERING 2180903 Power System Planning and Design 16-05-2018 17-05-2018 18-05-2018

005 Babaria, Vadodara 09 ELECTRICAL ENGINEERING 2180905 Project 16-05-2018 17-05-2018 18-05-2018

005 Babaria, Vadodara 09 ELECTRICAL ENGINEERING 2180910 Energy Conservaton, And Audit 14-05-2018 15-05-2018

005 Babaria, Vadodara 09 ELECTRICAL ENGINEERING 2180911 Power Quality And Management 14-05-2018 15-05-2018

5Sem:

005 Babaria, Vadodara 11 ELECTRONICS & COMMUNICATION ENGINEERING





2151102 Mini Project 11-06-2018

6Sem:













13-06-2018

7Sem:


2170001 Project - I 21-05-2018


2171003 Digital Signal Processing 14-05-2018


2171005 Embedded Systems 16-05-2018


2171008 Data Communicaton and Networking 11-05-2018

8Sem:





Page 7 of 57





2181108 Project II 21-05-2018

5Sem:

005 Babaria, Vadodara 19 MECHANICAL ENGINEERING 2151902 Theory of Machines 13-06-2018

005 Babaria, Vadodara 19 MECHANICAL ENGINEERING 2151903 Fluid Power Engineering 13-06-2018

005 Babaria, Vadodara 19 MECHANICAL ENGINEERING 2151907 Design of Machine Elements 11-06-2018

005 Babaria, Vadodara 19 MECHANICAL ENGINEERING 2151908 Control Engineering 13-06-20186Sem:

005 Babaria, Vadodara 19 MECHANICAL ENGINEERING 2151909 Heat Transfer 13-06-2018

005 Babaria, Vadodara 19 MECHANICAL ENGINEERING 2161901 Dynamics of Machinery 13-06-2018, 14-06-2018

005 Babaria, Vadodara 19 MECHANICAL ENGINEERING 2161901 Dynamics of Machinery 13-06-2018, 14-06-2018

005 Babaria, Vadodara 19 MECHANICAL ENGINEERING 2161902 Internal Combuston Engines 13-06-2018, 14-06-2018

005 Babaria, Vadodara 19 MECHANICAL ENGINEERING 2161902 Internal Combuston Engines 13-06-2018, 14-06-2018

005 Babaria, Vadodara 19 MECHANICAL ENGINEERING 2161903 Computer Aided Design 11-06-2018, 12-06-2018

005 Babaria, Vadodara 19 MECHANICAL ENGINEERING 2161903 Computer Aided Design 11-06-2018, 12-06-2018

005 Babaria, Vadodara 19 MECHANICAL ENGINEERING 2161907 Industrial Engineering 11-06-2018, 12-06-2018

005 Babaria, Vadodara 19 MECHANICAL ENGINEERING 2161907 Industrial Engineering 11-06-2018, 12-06-2018

005 Babaria, Vadodara 19 MECHANICAL ENGINEERING 2161908 Refrigeraton and Air Conditoning 07-06-2018, 08-06-2018

005 Babaria, Vadodara 19 MECHANICAL ENGINEERING 2161908 Refrigeraton and Air Conditoning 07-06-2018, 08-06-2018

005 Babaria, Vadodara 19 MECHANICAL ENGINEERING 2161909 Producton Technology 07-06-2018, 08-06-2018

005 Babaria, Vadodara 19 MECHANICAL ENGINEERING 2161909 Producton Technology 07-06-2018, 08-06-2018

8Sem:

005 Babaria, Vadodara 19 MECHANICAL ENGINEERING 2181909 Project – II 14-05-2018

005 Babaria, Vadodara 19 MECHANICAL ENGINEERING 2181913 Product Design And Value Engineering 12-05-2018

005 Babaria, Vadodara 19 MECHANICAL ENGINEERING 2181915 Automobile Engineering 10-05-2018, 11-05-2018

005 Babaria, Vadodara 19 MECHANICAL ENGINEERING 2181920 Quality Engineering 11-05-2018, 12-05-2018

5Sem:

005 Babaria, Vadodara 31 COMPUTER SCIENCE & ENGINEERING


6Sem:



Page 8 of 57







2160707 Advanced Java 13-06-2018


2160708 Web Technology 14-06-2018


2160711 .Net Technology 11-06-2018

8Sem:




2180706 Project (Phase-II) 14-05-2018









5Sem:

007 BVM-G, VVNagar 06 CIVIL ENGINEERING 2150601 Highway Engineering 14-06-2018

007 BVM-G, VVNagar 06 CIVIL ENGINEERING 2150602 Hydrology & Water Resources Engineering 12-06-2018

007 BVM-G, VVNagar 06 CIVIL ENGINEERING 2150603 Environmental Engineering 12-06-2018

007 BVM-G, VVNagar 06 CIVIL ENGINEERING 2150608 Structural Analysis-II 13-06-20186Sem:

007 BVM-G, VVNagar 06 CIVIL ENGINEERING 2160601 Advanced Constructon and Equipments 07-06-2018

007 BVM-G, VVNagar 06 CIVIL ENGINEERING 2160602 Applied Fluid Mechanics 08-06-2018

007 BVM-G, VVNagar 06 CIVIL ENGINEERING 2160603 Railway, Bridge & Tunnel Engineering 11-06-2018

007 BVM-G, VVNagar 06 CIVIL ENGINEERING 2160604 Water & Waste Water Engineering 12-06-2018

007 BVM-G, VVNagar 06 CIVIL ENGINEERING 2160607 Elementary Structural Design 13-06-2018

007 BVM-G, VVNagar 06 CIVIL ENGINEERING 2160608 Urban Transportaton system 14-06-20187Sem:

007 BVM-G, VVNagar 06 CIVIL ENGINEERING 2170003 Project - I 18-05-2018

007 BVM-G, VVNagar 06 CIVIL ENGINEERING 2170607 Design of Reinforced Concrete Structures 14-05-20188Sem:

007 BVM-G, VVNagar 06 CIVIL ENGINEERING 2180601 Design Of Hydraulic Structures 19-05-2018

007 BVM-G, VVNagar 06 CIVIL ENGINEERING 2180602 Harbour & Airport Engineering 19-05-2018

007 BVM-G, VVNagar 06 CIVIL ENGINEERING 2180605 Project – II 18-05-2018

007 BVM-G, VVNagar 06 CIVIL ENGINEERING 2180607 Repairs & Rehabilitaton Of Concrete Structures 21-05-2018

007 BVM-G, VVNagar 06 CIVIL ENGINEERING 2180609 Foundaton Engineering 10-05-2018

007 BVM-G, VVNagar 06 CIVIL ENGINEERING 2180609 Foundaton Engineering 11-05-2018

007 BVM-G, VVNagar 06 CIVIL ENGINEERING 2180610 Design of Steel Structures 14-05-2018

007 BVM-G, VVNagar 06 CIVIL ENGINEERING 2180610 Design of Steel Structures 15-05-2018

007 BVM-G, VVNagar 06 CIVIL ENGINEERING 2180611 Constructon Management 16-05-2018

007 BVM-G, VVNagar 06 CIVIL ENGINEERING 2180611 Constructon Management 17-05-2018

007 BVM-G, VVNagar 06 CIVIL ENGINEERING 2180612 Design Of Prestressed Concrete Structures & Bridges

19-05-2018

5Sem:

007 BVM-G, VVNagar 07 COMPUTER ENGINEERING 2150002 Insttute Electve - Cyber Security 07-06-2018

007 BVM-G, VVNagar 07 COMPUTER ENGINEERING 2150703 Analysis and Design of Algorithms 08-06-2018

007 BVM-G, VVNagar 07 COMPUTER ENGINEERING 2150704 Object Oriented Programming using JAVA 11-06-2018

007 BVM-G, VVNagar 07 COMPUTER ENGINEERING 2150707 Microprocessor and Interfacing 12-06-2018

Page 9 of 57




007 BVM-G, VVNagar 07 COMPUTER ENGINEERING 2150708 System Programming 13-06-20186Sem:

007 BVM-G, VVNagar 07 COMPUTER ENGINEERING 2160701 Sofware Engineering 07-06-2018

007 BVM-G, VVNagar 07 COMPUTER ENGINEERING 2160703 Computer Graphics 08-06-2018

007 BVM-G, VVNagar 07 COMPUTER ENGINEERING 2160707 Advanced Java 11-06-2018

007 BVM-G, VVNagar 07 COMPUTER ENGINEERING 2160708 Web Technology 14-06-20187Sem:

007 BVM-G, VVNagar 07 COMPUTER ENGINEERING 170001 Project - I 10-05-2018

007 BVM-G, VVNagar 07 COMPUTER ENGINEERING 2170709 Informaton and Network Security 14-05-20188Sem:

007 BVM-G, VVNagar 07 COMPUTER ENGINEERING 2180703 Artfcial Intelligence 11-05-2018

007 BVM-G, VVNagar 07 COMPUTER ENGINEERING 2180706 Project (Phase-II) 10-05-2018

007 BVM-G, VVNagar 07 COMPUTER ENGINEERING 2180711 Python Programming 14-05-2018

007 BVM-G, VVNagar 07 COMPUTER ENGINEERING 2180713 Web Data Management 15-05-20188Sem:

007 BVM-G, VVNagar 09 ELECTRICAL ENGINEERING 2180901 Testng and Commissioning of Electrical Equipments

10-05-2018,11-05-2018

007 BVM-G, VVNagar 09 ELECTRICAL ENGINEERING 2180903 Power System Planning and Design 10-05-2018,11-05-2018

007 BVM-G, VVNagar 09 ELECTRICAL ENGINEERING 2180905 Project 14-05-2018 15-05-2018

007 BVM-G, VVNagar 09 ELECTRICAL ENGINEERING 2180910 Energy Conservaton, And Audit 12-05-2018

007 BVM-G, VVNagar 09 ELECTRICAL ENGINEERING 2180911 Power Quality And Management 12-05-20186Sem:

007 BVM-G, VVNagar 10 ELECTRONICS ENGINEERING 2161001 Digital Communicaton 15-06-2018

007 BVM-G, VVNagar 10 ELECTRONICS ENGINEERING 2161003 Antenna & Wave Propagaton 07-06-2018

007 BVM-G, VVNagar 10 ELECTRONICS ENGINEERING 2161005 Optcal Communicaton 08-06-2018

007 BVM-G, VVNagar 10 ELECTRONICS ENGINEERING 2161006 Power Electronics Devices and Circuits 11-06-2018

007 BVM-G, VVNagar 10 ELECTRONICS ENGINEERING 2161007 Digital Control 12-06-20188Sem:

007 BVM-G, VVNagar 10 ELECTRONICS ENGINEERING 2181006 Advance Microprocessor 11-05-2018

007 BVM-G, VVNagar 10 ELECTRONICS ENGINEERING 2181007 Satellite Communicaton 14-05-2018

007 BVM-G, VVNagar 10 ELECTRONICS ENGINEERING 2181008 Project 09-05-2018

007 BVM-G, VVNagar 10 ELECTRONICS ENGINEERING 2181008 Project 10-05-2018

007 BVM-G, VVNagar 10 ELECTRONICS ENGINEERING 2181102 Fundamental Of Image Processing 09-05-20188Sem:

007 BVM-G, VVNagar 19 MECHANICAL ENGINEERING 2181909 Project – II 14-05-2018

007 BVM-G, VVNagar 19 MECHANICAL ENGINEERING 2181909 Project – II 14-05-2018, 15-05-2018

007 BVM-G, VVNagar 19 MECHANICAL ENGINEERING 2181912 Optmizaton 12-05-2018

007 BVM-G, VVNagar 19 MECHANICAL ENGINEERING 2181913 Product Design And Value Engineering 16-05-2018

007 BVM-G, VVNagar 19 MECHANICAL ENGINEERING 2181916 Energy Conservaton And Management 10-05-2018

007 BVM-G, VVNagar 19 MECHANICAL ENGINEERING 2181926 Tribology 15-05-20188Sem:

007 BVM-G, VVNagar 25 PRODUCTION ENGINEERING 2182501 Producton and Operatons Management 14-05-2018

007 BVM-G, VVNagar 25 PRODUCTION ENGINEERING 2182502 Recent Advances in Manufacturing 10-05-2018

007 BVM-G, VVNagar 25 PRODUCTION ENGINEERING 2182503 Design of Product and Machine Tools 16-05-2018

007 BVM-G, VVNagar 25 PRODUCTION ENGINEERING 2182504 Facilites Planning 11-05-2018

007 BVM-G, VVNagar 25 PRODUCTION ENGINEERING 2182506 Managing Projects 12-05-2018

007 BVM-G, VVNagar 25 PRODUCTION ENGINEERING 2182507 Project – II 15-05-2018

Page 10 of 57




5Sem:

008 BVM-S, VVNagar 11 ELECTRONICS & COMMUNICATION ENGINEERING

2151102 Mini Project 11-06-2018

6Sem:











11-06-2018

8Sem:






2181108 Project II 14-05-2018

8Sem:

008 BVM-S, VVNagar 12 ELECTRONICS & TELECOMMUNICATION ENGINEERING


008 BVM-S, VVNagar 12 ELECTRONICS & TELECOMMUNICATION ENGINEERING

2181108 Project II 14-05-2018

8Sem:

008 BVM-S, VVNagar 16 INFORMATION TECHNOLOGY







2181606 Project (Phase-II) 15-05-2018

8Sem:

008 BVM-S, VVNagar 19 MECHANICAL ENGINEERING 2181909 Project – II 14-05-2018

008 BVM-S, VVNagar 19 MECHANICAL ENGINEERING 2181912 Optmizaton 15-05-2018

008 BVM-S, VVNagar 19 MECHANICAL ENGINEERING 2181913 Product Design And Value Engineering 12-05-2018

008 BVM-S, VVNagar 19 MECHANICAL ENGINEERING 2181916 Energy Conservaton And Management 11-05-20185Sem:

008 BVM-S, VVNagar 25 PRODUCTION ENGINEERING 2152506 Foundry Technology 09-06-2018

008 BVM-S, VVNagar 25 PRODUCTION ENGINEERING 2152507 Tool Engineering 11-06-2018

008 BVM-S, VVNagar 25 PRODUCTION ENGINEERING 2152508 Design of Machine Elements 12-06-2018

008 BVM-S, VVNagar 25 PRODUCTION ENGINEERING 2152509 Machine Dynamics 08-06-20186Sem:

008 BVM-S, VVNagar 25 PRODUCTION ENGINEERING 2161903 Computer Aided Design 11-06-2018

008 BVM-S, VVNagar 25 PRODUCTION ENGINEERING 2162505 Estmatng and Costng 08-06-2018

008 BVM-S, VVNagar 25 PRODUCTION ENGINEERING 2162506 Metal Joining Technology 12-06-2018

Page 11 of 57




008 BVM-S, VVNagar 25 PRODUCTION ENGINEERING 2162507 Allied Manufacturing Technique 12-06-2018

008 BVM-S, VVNagar 25 PRODUCTION ENGINEERING 2162508 Metal Forming Technology 09-06-20188Sem:

008 BVM-S, VVNagar 25 PRODUCTION ENGINEERING 2182501 Producton and Operatons Management 16-05-2018

008 BVM-S, VVNagar 25 PRODUCTION ENGINEERING 2182502 Recent Advances in Manufacturing 11-05-2018

008 BVM-S, VVNagar 25 PRODUCTION ENGINEERING 2182503 Design of Product and Machine Tools 15-05-2018

008 BVM-S, VVNagar 25 PRODUCTION ENGINEERING 2182504 Facilites Planning 10-05-2018

008 BVM-S, VVNagar 25 PRODUCTION ENGINEERING 2182506 Managing Projects 14-05-2018

008 BVM-S, VVNagar 25 PRODUCTION ENGINEERING 2182507 Project – II 12-05-20185Sem:

011 GHP, VVNagar 05 CHEMICAL ENGINEERING 2150501 Mass Transfer Operaton - I 14-06-2018

011 GHP, VVNagar 05 CHEMICAL ENGINEERING 2150502 Mechanical Operaton 12-06-2018

011 GHP, VVNagar 05 CHEMICAL ENGINEERING 2150503 Chemical Engineering Thermodynamics - II 13-06-2018

011 GHP, VVNagar 05 CHEMICAL ENGINEERING 2150504 Instrumentaton & Process Control 11-06-20186Sem:

011 GHP, VVNagar 05 CHEMICAL ENGINEERING 2160501 Mass Transfer Operaton - II 18-06-2018 , 19-06-2018

011 GHP, VVNagar 05 CHEMICAL ENGINEERING 2160503 Process Equipment Design -I 14-06-2018 , 15-06-2018

011 GHP, VVNagar 05 CHEMICAL ENGINEERING 2160506 Chemical Reacton Engineering - I 07-06-2018 , 09-06-2018

011 GHP, VVNagar 05 CHEMICAL ENGINEERING 2160507 Advance Separaton Techniques 14-06-2018 , 15-06-2018

011 GHP, VVNagar 05 CHEMICAL ENGINEERING 2160508 Biochemical Engineering 09-06-20187Sem:

011 GHP, VVNagar 05 CHEMICAL ENGINEERING 2170001 Project - I 19-05-2018

011 GHP, VVNagar 05 CHEMICAL ENGINEERING 2170501 Chemical Reacton Engineering - II 17-05-2018

011 GHP, VVNagar 05 CHEMICAL ENGINEERING 2170502 Process Equipment Design -II 14-05-2018

011 GHP, VVNagar 05 CHEMICAL ENGINEERING 2170507 Computer Aided Process Synthesis 18-05-20188Sem:

011 GHP, VVNagar 05 CHEMICAL ENGINEERING 2180502 Petroleum Refning & Petrochemicals 10-05-2018,11-05-2018

011 GHP, VVNagar 05 CHEMICAL ENGINEERING 2180503 Process Modeling, Simulaton & Optmizaton 10-05-2018,11-05-2018

011 GHP, VVNagar 05 CHEMICAL ENGINEERING 2180504 Project – II 15-05-2018

011 GHP, VVNagar 05 CHEMICAL ENGINEERING 2180504 Project – II 15-05-2018 , 16-05-2018

011 GHP, VVNagar 05 CHEMICAL ENGINEERING 2180505 Mult Component Distllaton 12-05-2018

011 GHP, VVNagar 05 CHEMICAL ENGINEERING 2180509 Fertlizer Technology 12-05-20185Sem:

011 GHP, VVNagar 06 CIVIL ENGINEERING 2150602 Hydrology & Water Resources Engineering 12-06-2018

011 GHP, VVNagar 06 CIVIL ENGINEERING 2150603 Environmental Engineering 12-06-2018

011 GHP, VVNagar 06 CIVIL ENGINEERING 2150608 Structural Analysis-II 13-06-2018

011 GHP, VVNagar 06 CIVIL ENGINEERING 2150609 Soil Mechanics 14-06-20186Sem:

011 GHP, VVNagar 06 CIVIL ENGINEERING 2160601 Advanced Constructon and Equipments 07-06-2018

011 GHP, VVNagar 06 CIVIL ENGINEERING 2160602 Applied Fluid Mechanics 08-06-2018

011 GHP, VVNagar 06 CIVIL ENGINEERING 2160603 Railway, Bridge & Tunnel Engineering 11-06-2018

Page 12 of 57




011 GHP, VVNagar 06 CIVIL ENGINEERING 2160604 Water & Waste Water Engineering 12-06-2018

011 GHP, VVNagar 06 CIVIL ENGINEERING 2160607 Elementary Structural Design 13-06-2018

011 GHP, VVNagar 06 CIVIL ENGINEERING 2160608 Urban Transportaton system 14-06-2018

011 GHP, VVNagar 06 CIVIL ENGINEERING 2160609 Computatonal Mechanics 14-06-20188Sem:

011 GHP, VVNagar 06 CIVIL ENGINEERING 2180602 Harbour & Airport Engineering 19-05-2018

011 GHP, VVNagar 06 CIVIL ENGINEERING 2180605 Project – II 18-05-2018

011 GHP, VVNagar 06 CIVIL ENGINEERING 2180607 Repairs & Rehabilitaton Of Concrete Structures 21-05-2018

011 GHP, VVNagar 06 CIVIL ENGINEERING 2180609 Foundaton Engineering 10-05-2018

011 GHP, VVNagar 06 CIVIL ENGINEERING 2180610 Design of Steel Structures 14-05-2018

011 GHP, VVNagar 06 CIVIL ENGINEERING 2180610 Design of Steel Structures 15-05-2018

011 GHP, VVNagar 06 CIVIL ENGINEERING 2180611 Constructon Management 16-05-2018

011 GHP, VVNagar 06 CIVIL ENGINEERING 2180611 Constructon Management 17-05-2018

011 GHP, VVNagar 06 CIVIL ENGINEERING 2180612 Design Of Prestressed Concrete Structures & Bridges

19-05-2018

5Sem:

011 GHP, VVNagar 07 COMPUTER ENGINEERING 2150002 Insttute Electve - Cyber Security 07-06-2018

011 GHP, VVNagar 07 COMPUTER ENGINEERING 2150703 Analysis and Design of Algorithms 08-06-2018

011 GHP, VVNagar 07 COMPUTER ENGINEERING 2150704 Object Oriented Programming using JAVA 11-06-2018

011 GHP, VVNagar 07 COMPUTER ENGINEERING 2150707 Microprocessor and Interfacing 12-06-2018

011 GHP, VVNagar 07 COMPUTER ENGINEERING 2150708 System Programming 13-06-20186Sem:

011 GHP, VVNagar 07 COMPUTER ENGINEERING 2160701 Sofware Engineering 07-06-2018

011 GHP, VVNagar 07 COMPUTER ENGINEERING 2160703 Computer Graphics 08-06-2018

011 GHP, VVNagar 07 COMPUTER ENGINEERING 2160707 Advanced Java 11-06-2018

011 GHP, VVNagar 07 COMPUTER ENGINEERING 2160708 Web Technology 12-06-2018

011 GHP, VVNagar 07 COMPUTER ENGINEERING 2160711 .Net Technology 08-06-20188Sem:

011 GHP, VVNagar 07 COMPUTER ENGINEERING 2180703 Artfcial Intelligence 10-05-2018

011 GHP, VVNagar 07 COMPUTER ENGINEERING 2180706 Project (Phase-II) 11-05-2018

011 GHP, VVNagar 07 COMPUTER ENGINEERING 2180709 Iot And Applicatons 14-05-2018

011 GHP, VVNagar 07 COMPUTER ENGINEERING 2180710 Big Data Analytcs 14-05-2018

011 GHP, VVNagar 07 COMPUTER ENGINEERING 2180713 Web Data Management 14-05-20186Sem:

011 GHP, VVNagar 09 ELECTRICAL ENGINEERING 2160902 Power Electronics – II 11-06-2018, 12-06-2018

011 GHP, VVNagar 09 ELECTRICAL ENGINEERING 2160904 High Voltage Engineering 11-06-2018, 12-06-2018

011 GHP, VVNagar 09 ELECTRICAL ENGINEERING 2160908 Electrical Power system – II 13-06-2018, 14-06-2018

011 GHP, VVNagar 09 ELECTRICAL ENGINEERING 2160912 Design of DC Machines and Transformer 8-06-2018, 9-06-2018

011 GHP, VVNagar 09 ELECTRICAL ENGINEERING 2160913 Control of Electrical Drives 13-06-2018, 14-06-2018

7Sem:

011 GHP, VVNagar 09 ELECTRICAL ENGINEERING 2170901 Inter Connected Power System 12-05-2018,

8Sem:

011 GHP, VVNagar 09 ELECTRICAL ENGINEERING 2180901 Testng and Commissioning of Electrical Equipments

10-05-2018,11-05-2018

Page 13 of 57




011 GHP, VVNagar 09 ELECTRICAL ENGINEERING 2180903 Power System Planning and Design 10-05-2018,11-05-2018

011 GHP, VVNagar 09 ELECTRICAL ENGINEERING 2180905 Project 14-05-2018 15-05-2018

011 GHP, VVNagar 09 ELECTRICAL ENGINEERING 2180910 Energy Conservaton, And Audit 12-05-2018,

011 GHP, VVNagar 09 ELECTRICAL ENGINEERING 2180911 Power Quality And Management 12-05-20185Sem:

011 GHP, VVNagar 11 ELECTRONICS & COMMUNICATION ENGINEERING







2151004 Electronic and Communicaton 13-06-2018




2151102 Mini Project 14-06-2018

6Sem:















08-06-2018

8Sem:






2181108 Project II 15-05-2018

5Sem:

011 GHP, VVNagar 16 INFORMATION TECHNOLOGY


6Sem:

Page 14 of 57







2160707 Advanced Java 11-06-2018


2160708 Web Technology 12-06-2018


2160710 Distributed operatng system 07-06-2018


2160711 .Net Technology 07-06-2018



7Sem:


2170002 Project - I 14-05-2018


2170709 Informaton and Network Security 19-05-2018




2170715 Data Mining and Business Intelligence 21-05-2018



8Sem:






2180712 Cloud Infrastructure And Services 15-05-2018


2181606 Project (Phase-II) 14-05-2018

5Sem:

011 GHP, VVNagar 19 MECHANICAL ENGINEERING 2151902 Theory of Machines 11-06-2018

011 GHP, VVNagar 19 MECHANICAL ENGINEERING 2151903 Fluid Power Engineering 13-06-2018

011 GHP, VVNagar 19 MECHANICAL ENGINEERING 2151907 Design of Machine Elements 11-06-2018

011 GHP, VVNagar 19 MECHANICAL ENGINEERING 2151908 Control Engineering 13-06-2018

011 GHP, VVNagar 19 MECHANICAL ENGINEERING 2151909 Heat Transfer 11-06-20186Sem:

011 GHP, VVNagar 19 MECHANICAL ENGINEERING 2161901 Dynamics of Machinery 11-06-2018

011 GHP, VVNagar 19 MECHANICAL ENGINEERING 2161902 Internal Combuston Engines 07-06-2018

011 GHP, VVNagar 19 MECHANICAL ENGINEERING 2161902 Internal Combuston Engines 07-06-2018, 08-06-2018, 09-06-2018

011 GHP, VVNagar 19 MECHANICAL ENGINEERING 2161903 Computer Aided Design 11-06-2018

011 GHP, VVNagar 19 MECHANICAL ENGINEERING 2161903 Computer Aided Design 12-06-2018, 13-06-2018

011 GHP, VVNagar 19 MECHANICAL ENGINEERING 2161907 Industrial Engineering 07-06-2018, 08-06-2018, 09-06-2018

011 GHP, VVNagar 19 MECHANICAL ENGINEERING 2161908 Refrigeraton and Air Conditoning 11-06-2018, 12-06-2018, 13-06-2018

Page 15 of 57




011 GHP, VVNagar 19 MECHANICAL ENGINEERING 2161909 Producton Technology 07-06-2018

011 GHP, VVNagar 19 MECHANICAL ENGINEERING 2161909 Producton Technology 07-06-2018, 08-06-2018, 09-06-2018

8Sem:

011 GHP, VVNagar 19 MECHANICAL ENGINEERING 2161908 Refrigeraton and Air Conditoning 11-05-2018

011 GHP, VVNagar 19 MECHANICAL ENGINEERING 2161909 Producton Technology 12-05-2018

011 GHP, VVNagar 19 MECHANICAL ENGINEERING 2181909 Project – II 14-05-2018

011 GHP, VVNagar 19 MECHANICAL ENGINEERING 2181913 Product Design And Value Engineering 12-05-2018

011 GHP, VVNagar 19 MECHANICAL ENGINEERING 2181916 Energy Conservaton And Management 11-05-2018

011 GHP, VVNagar 19 MECHANICAL ENGINEERING 2181920 Quality Engineering 11-05-2018, 12-05-2018

5Sem:

011 GHP, VVNagar 20 MECHATRONICS ENGINEERING

2152001 Electro Mechanical Energy Conversion 14-06-2018


2152003 Fluid Mechanics & Machines 08-06-2018


2152006 Basics of Micro Computer Systems 07-06-2018


2152007 Manufacturing Technology - I 13-06-2018

6Sem:


2161907 Industrial Engineering 13-06-2018


2162001 Design of Mechanisms - I 07-06-2018


2162001 Design of Mechanisms - I 07-06-2018, 08-06-2018


2162003 Control of Electric Drives 07-06-2018


2162003 Control of Electric Drives 07-06-2018, 08-06-2018


2162004 Hydraulic & Pneumatc Systems 11-06-2018


2162004 Hydraulic & Pneumatc Systems 11-06-2018, 12-06-2018


2162005 Electro Mechanical Measurements & Instruments 11-06-2018, 12-06-2018


2162005 Electro Mechanical Measurements & Instruments 12-06-2018


2162006 Computer Aided Design for Mechatronics 13-06-2018

7Sem:


2170001 Project - I 14-05-2018


2172001 Microcontrollers and Embedded Systems 16-05-2018


2172003 Manufacturing Technology - II 17-05-2018


2172007 Modern Control Systems 18-05-2018


2172010 Automated Manufacturing - I 19-05-2018

Page 16 of 57





2172011 Producton Optmizaton Techniques 21-05-2018

8Sem:


2181915 Automobile Engineering 12-05-2018


2182001 Programmable Logic Controllers 10-05-2018, 11-05-2018


2182002 Automated Manufacturing - II 16-05-2018


2182002 Automated Manufacturing - II 16-05-2018, 17-05-2018


2182004 Design of Mechanisms - II 14-05-2018, 15-05-2018


2182005 Project – II 14-05-2018, 15-05-2018


2182006 Machine Vision 12-05-2018

5Sem:

018 GEC-Dahod 06 CIVIL ENGINEERING 2150602 Hydrology & Water Resources Engineering 12-06-2018

018 GEC-Dahod 06 CIVIL ENGINEERING 2150603 Environmental Engineering 12-06-2018

018 GEC-Dahod 06 CIVIL ENGINEERING 2150608 Structural Analysis-II 13-06-2018

018 GEC-Dahod 06 CIVIL ENGINEERING 2150609 Soil Mechanics 14-06-20186Sem:

018 GEC-Dahod 06 CIVIL ENGINEERING 2160601 Advanced Constructon and Equipments 07-06-2018

018 GEC-Dahod 06 CIVIL ENGINEERING 2160602 Applied Fluid Mechanics 08-06-2018

018 GEC-Dahod 06 CIVIL ENGINEERING 2160603 Railway, Bridge & Tunnel Engineering 11-06-2018

018 GEC-Dahod 06 CIVIL ENGINEERING 2160604 Water & Waste Water Engineering 12-06-2018

018 GEC-Dahod 06 CIVIL ENGINEERING 2160607 Elementary Structural Design 13-06-2018

018 GEC-Dahod 06 CIVIL ENGINEERING 2160608 Urban Transportaton system 14-06-20187Sem:

018 GEC-Dahod 06 CIVIL ENGINEERING 2170003 Project - I 18-05-2018

018 GEC-Dahod 06 CIVIL ENGINEERING 2170607 Design of Reinforced Concrete Structures 15-05-2018

018 GEC-Dahod 06 CIVIL ENGINEERING 2170609 Irrigaton Engineering 18-05-2018

018 GEC-Dahod 06 CIVIL ENGINEERING 2170610 Professional Practces & Valuaton 19-05-2018

018 GEC-Dahod 06 CIVIL ENGINEERING 2170613 Trafc Engineering 19-05-20188Sem:

018 GEC-Dahod 06 CIVIL ENGINEERING 2170610 Professional Practces & Valuaton 19-05-2018

018 GEC-Dahod 06 CIVIL ENGINEERING 2180602 Harbour & Airport Engineering 19-05-2018

018 GEC-Dahod 06 CIVIL ENGINEERING 2180605 Project – II 18-05-2018

018 GEC-Dahod 06 CIVIL ENGINEERING 2180607 Repairs & Rehabilitaton Of Concrete Structures 21-05-2018

018 GEC-Dahod 06 CIVIL ENGINEERING 2180609 Foundaton Engineering 10-05-2018

018 GEC-Dahod 06 CIVIL ENGINEERING 2180609 Foundaton Engineering 11-05-2018

018 GEC-Dahod 06 CIVIL ENGINEERING 2180610 Design of Steel Structures 14-05-2018

018 GEC-Dahod 06 CIVIL ENGINEERING 2180610 Design of Steel Structures 15-05-2018

018 GEC-Dahod 06 CIVIL ENGINEERING 2180611 Constructon Management 16-05-2018

018 GEC-Dahod 06 CIVIL ENGINEERING 2180611 Constructon Management 17-05-20185Sem:

018 GEC-Dahod 07 COMPUTER ENGINEERING 2150703 Analysis and Design of Algorithms 08-06-2018

018 GEC-Dahod 07 COMPUTER ENGINEERING 2150704 Object Oriented Programming using JAVA 11-06-20186Sem:

Page 17 of 57




018 GEC-Dahod 07 COMPUTER ENGINEERING 2160701 Sofware Engineering 07-06-2018

018 GEC-Dahod 07 COMPUTER ENGINEERING 2160707 Advanced Java 12-06-2018

018 GEC-Dahod 07 COMPUTER ENGINEERING 2160708 Web Technology 13-06-2018

018 GEC-Dahod 07 COMPUTER ENGINEERING 2160710 Distributed operatng system 11-06-20188Sem:

018 GEC-Dahod 07 COMPUTER ENGINEERING 2180703 Artfcial Intelligence 10-05-2018

018 GEC-Dahod 07 COMPUTER ENGINEERING 2180706 Project (Phase-II) 11-05-2018

018 GEC-Dahod 07 COMPUTER ENGINEERING 2180711 Python Programming 14-05-20186Sem:

018 GEC-Dahod 09 ELECTRICAL ENGINEERING 2160902 Power Electronics – II 8-06-2018, 9-06-2018

018 GEC-Dahod 09 ELECTRICAL ENGINEERING 2160904 High Voltage Engineering 11-06-2018, 12-06-2018

018 GEC-Dahod 09 ELECTRICAL ENGINEERING 2160908 Electrical Power system – II 11-06-2018, 12-06-2018

018 GEC-Dahod 09 ELECTRICAL ENGINEERING 2160912 Design of DC Machines and Transformer 13-06-2018, 14-06-2018

018 GEC-Dahod 09 ELECTRICAL ENGINEERING 2160913 Control of Electrical Drives 13-06-2018, 14-06-2018

8Sem:

018 GEC-Dahod 09 ELECTRICAL ENGINEERING 2180901 Testng and Commissioning of Electrical Equipments

10-05-2018 11-05-2018 12-05-2018

018 GEC-Dahod 09 ELECTRICAL ENGINEERING 2180903 Power System Planning and Design 10-05-2018 11-05-2018 12-05-2018

018 GEC-Dahod 09 ELECTRICAL ENGINEERING 2180905 Project 10-05-2018 11-05-2018 12-05-2018

018 GEC-Dahod 09 ELECTRICAL ENGINEERING 2180911 Power Quality And Management 14-05-20185Sem:

018 GEC-Dahod 11 ELECTRONICS & COMMUNICATION ENGINEERING

2151004 Electronic and Communicaton 11-06-2018


2151102 Mini Project 12-06-2018

6Sem:











8Sem:



Page 18 of 57







2181108 Project II 18-05-2018

5Sem:

018 GEC-Dahod 19 MECHANICAL ENGINEERING 2151908 Control Engineering 11-06-20186Sem:

018 GEC-Dahod 19 MECHANICAL ENGINEERING 2161901 Dynamics of Machinery 11-06-2018

018 GEC-Dahod 19 MECHANICAL ENGINEERING 2161902 Internal Combuston Engines 14-06-2018

018 GEC-Dahod 19 MECHANICAL ENGINEERING 2161903 Computer Aided Design 13-06-2018

018 GEC-Dahod 19 MECHANICAL ENGINEERING 2161907 Industrial Engineering 09-06-2018

018 GEC-Dahod 19 MECHANICAL ENGINEERING 2161908 Refrigeraton and Air Conditoning 12-06-2018

018 GEC-Dahod 19 MECHANICAL ENGINEERING 2161909 Producton Technology 07-06-20187Sem:

018 GEC-Dahod 19 MECHANICAL ENGINEERING 2170001 Project - I 15-05-2018

018 GEC-Dahod 19 MECHANICAL ENGINEERING 2171901 Operaton Research 14-05-2018

018 GEC-Dahod 19 MECHANICAL ENGINEERING 2171903 Computer Aided Manufacturing 15-05-2018

018 GEC-Dahod 19 MECHANICAL ENGINEERING 2171909 Machine Design 15-05-20188Sem:

018 GEC-Dahod 19 MECHANICAL ENGINEERING 2161908 Refrigeraton and Air Conditoning 15-05-2018

018 GEC-Dahod 19 MECHANICAL ENGINEERING 2161909 Producton Technology 14-05-2018

018 GEC-Dahod 19 MECHANICAL ENGINEERING 2171909 Machine Design 15-05-2018

018 GEC-Dahod 19 MECHANICAL ENGINEERING 2181909 Project – II 15-05-2018

018 GEC-Dahod 19 MECHANICAL ENGINEERING 2181915 Automobile Engineering 14-05-2018

018 GEC-Dahod 19 MECHANICAL ENGINEERING 2181923 Entrepreneurship 12-05-20185Sem:

037 Parul, Vaghodia 06 CIVIL ENGINEERING 2150601 Highway Engineering 14-06-2018

037 Parul, Vaghodia 06 CIVIL ENGINEERING 2150602 Hydrology & Water Resources Engineering 12-06-2018

037 Parul, Vaghodia 06 CIVIL ENGINEERING 2150603 Environmental Engineering 12-06-20186Sem:

037 Parul, Vaghodia 06 CIVIL ENGINEERING 2160601 Advanced Constructon and Equipments 07-06-2018

037 Parul, Vaghodia 06 CIVIL ENGINEERING 2160602 Applied Fluid Mechanics 08-06-2018

037 Parul, Vaghodia 06 CIVIL ENGINEERING 2160603 Railway, Bridge & Tunnel Engineering 11-06-2018

037 Parul, Vaghodia 06 CIVIL ENGINEERING 2160604 Water & Waste Water Engineering 12-06-2018

037 Parul, Vaghodia 06 CIVIL ENGINEERING 2160607 Elementary Structural Design 13-06-2018

037 Parul, Vaghodia 06 CIVIL ENGINEERING 2160608 Urban Transportaton system 14-06-20187Sem:

037 Parul, Vaghodia 06 CIVIL ENGINEERING 170001 Project - I 18-05-2018

037 Parul, Vaghodia 06 CIVIL ENGINEERING 2170003 Project - I 18-05-2018

037 Parul, Vaghodia 06 CIVIL ENGINEERING 2170607 Design of Reinforced Concrete Structures 14-05-2018

037 Parul, Vaghodia 06 CIVIL ENGINEERING 2170609 Irrigaton Engineering 21-05-2018

037 Parul, Vaghodia 06 CIVIL ENGINEERING 2170610 Professional Practces & Valuaton 16-05-2018

037 Parul, Vaghodia 06 CIVIL ENGINEERING 2170613 Trafc Engineering 18-05-20188Sem:

037 Parul, Vaghodia 06 CIVIL ENGINEERING 180605 Project -II 18-05-2018

037 Parul, Vaghodia 06 CIVIL ENGINEERING 2180602 Harbour & Airport Engineering 19-05-2018

037 Parul, Vaghodia 06 CIVIL ENGINEERING 2180605 Project – II 18-05-2018

037 Parul, Vaghodia 06 CIVIL ENGINEERING 2180607 Repairs & Rehabilitaton Of Concrete Structures 21-05-2018

037 Parul, Vaghodia 06 CIVIL ENGINEERING 2180609 Foundaton Engineering 10-05-2018

037 Parul, Vaghodia 06 CIVIL ENGINEERING 2180610 Design of Steel Structures 14-05-2018

Page 19 of 57




037 Parul, Vaghodia 06 CIVIL ENGINEERING 2180610 Design of Steel Structures 15-05-2018

037 Parul, Vaghodia 06 CIVIL ENGINEERING 2180611 Constructon Management 16-05-2018

037 Parul, Vaghodia 06 CIVIL ENGINEERING 2180611 Constructon Management 17-05-20186Sem:

037 Parul, Vaghodia 07 COMPUTER ENGINEERING 2160701 Sofware Engineering 07-06-2018

037 Parul, Vaghodia 07 COMPUTER ENGINEERING 2160703 Computer Graphics 08-06-2018

037 Parul, Vaghodia 07 COMPUTER ENGINEERING 2160707 Advanced Java 11-06-2018

037 Parul, Vaghodia 07 COMPUTER ENGINEERING 2160708 Web Technology 12-06-20187Sem:

037 Parul, Vaghodia 07 COMPUTER ENGINEERING 2170002 Project - I 10-05-2018

037 Parul, Vaghodia 07 COMPUTER ENGINEERING 2170701 Compiler Design 11-05-20188Sem:

037 Parul, Vaghodia 07 COMPUTER ENGINEERING 2180703 Artfcial Intelligence 10-05-2018

037 Parul, Vaghodia 07 COMPUTER ENGINEERING 2180703 Artfcial Intelligence 11-05-2018

037 Parul, Vaghodia 07 COMPUTER ENGINEERING 2180706 Project (Phase-II) 14-05-2018

037 Parul, Vaghodia 07 COMPUTER ENGINEERING 2180706 Project (Phase-II) 15-05-2018

037 Parul, Vaghodia 07 COMPUTER ENGINEERING 2180709 Iot And Applicatons 16-05-2018

037 Parul, Vaghodia 07 COMPUTER ENGINEERING 2180710 Big Data Analytcs 16-05-2018

037 Parul, Vaghodia 07 COMPUTER ENGINEERING 2180711 Python Programming 16-05-2018

037 Parul, Vaghodia 07 COMPUTER ENGINEERING 2180712 Cloud Infrastructure And Services 16-05-20185Sem:

037 Parul, Vaghodia 09 ELECTRICAL ENGINEERING 2150002 Insttute Electve - Cyber Security 09-06-2018

037 Parul, Vaghodia 09 ELECTRICAL ENGINEERING 2150903 Power Electronics – I 14-06-2018

037 Parul, Vaghodia 09 ELECTRICAL ENGINEERING 2150904 Elements of Electrical Design 13-06-2018

037 Parul, Vaghodia 09 ELECTRICAL ENGINEERING 2150907 Microprocessor and Microcontroller Architecture & Interfacing

15-06-2018

037 Parul, Vaghodia 09 ELECTRICAL ENGINEERING 2150909 Control System Engineering 13-06-20186Sem:

037 Parul, Vaghodia 09 ELECTRICAL ENGINEERING 2160902 Power Electronics – II 14-06-2018

037 Parul, Vaghodia 09 ELECTRICAL ENGINEERING 2160904 High Voltage Engineering 11-06-2018

037 Parul, Vaghodia 09 ELECTRICAL ENGINEERING 2160908 Electrical Power system – II 12-06-2018

037 Parul, Vaghodia 09 ELECTRICAL ENGINEERING 2160911 Computer Aided Analysis and Design for Electrical Engg.

13-06-2018

037 Parul, Vaghodia 09 ELECTRICAL ENGINEERING 2160912 Design of DC Machines and Transformer 15-06-2018

037 Parul, Vaghodia 09 ELECTRICAL ENGINEERING 2160913 Control of Electrical Drives 13-06-20188Sem:

037 Parul, Vaghodia 09 ELECTRICAL ENGINEERING 2180901 Testng and Commissioning of Electrical Equipments

14-05-2018 15-05-2018 16-05-2018

037 Parul, Vaghodia 09 ELECTRICAL ENGINEERING 2180903 Power System Planning and Design 14-05-2018 15-05-2018 16-05-2018

037 Parul, Vaghodia 09 ELECTRICAL ENGINEERING 2180905 Project 14-05-2018 15-05-2018 16-05-2018

037 Parul, Vaghodia 09 ELECTRICAL ENGINEERING 2180910 Energy Conservaton, And Audit 17-05-2018 18-05-2018

037 Parul, Vaghodia 09 ELECTRICAL ENGINEERING 2180911 Power Quality And Management 17-05-2018

037 Parul, Vaghodia 09 ELECTRICAL ENGINEERING 2180913 Advanced Control Systems 17-05-20186Sem:

037 Parul, Vaghodia 11 ELECTRONICS & COMMUNICATION ENGINEERING


Page 20 of 57












15-06-2018

8Sem:






2181108 Project II 16-05-2018

5Sem:

037 Parul, Vaghodia 16 INFORMATION TECHNOLOGY










6Sem:




2160707 Advanced Java 12-06-2018


2160708 Web Technology 13-06-2018


2160711 .Net Technology 08-06-2018



7Sem:


2170002 Project - I 16-05-2018







8Sem:








2181606 Project (Phase-II) 16-05-2018

Page 21 of 57




5Sem:

037 Parul, Vaghodia 19 MECHANICAL ENGINEERING 2151902 Theory of Machines 09-06-2018

037 Parul, Vaghodia 19 MECHANICAL ENGINEERING 2151903 Fluid Power Engineering 11-06-2018

037 Parul, Vaghodia 19 MECHANICAL ENGINEERING 2151909 Heat Transfer 11-06-20186Sem:

037 Parul, Vaghodia 19 MECHANICAL ENGINEERING 2161901 Dynamics of Machinery 09-06-2018

037 Parul, Vaghodia 19 MECHANICAL ENGINEERING 2161902 Internal Combuston Engines 11-06-2018

037 Parul, Vaghodia 19 MECHANICAL ENGINEERING 2161903 Computer Aided Design 15-06-2018

037 Parul, Vaghodia 19 MECHANICAL ENGINEERING 2161907 Industrial Engineering 14-06-2018

037 Parul, Vaghodia 19 MECHANICAL ENGINEERING 2161908 Refrigeraton and Air Conditoning 13-06-2018

037 Parul, Vaghodia 19 MECHANICAL ENGINEERING 2161909 Producton Technology 12-06-20187Sem:

037 Parul, Vaghodia 19 MECHANICAL ENGINEERING 2170001 Project - I 15-05-2018

037 Parul, Vaghodia 19 MECHANICAL ENGINEERING 2171901 Operaton Research 11-05-2018

037 Parul, Vaghodia 19 MECHANICAL ENGINEERING 2171903 Computer Aided Manufacturing 14-05-2018

037 Parul, Vaghodia 19 MECHANICAL ENGINEERING 2171909 Machine Design 14-05-2018

037 Parul, Vaghodia 19 MECHANICAL ENGINEERING 2171910 Power Plant Engineering 11-05-20188Sem:

037 Parul, Vaghodia 19 MECHANICAL ENGINEERING 2161908 Refrigeraton and Air Conditoning 11-05-2018

037 Parul, Vaghodia 19 MECHANICAL ENGINEERING 2161909 Producton Technology 11-05-2018

037 Parul, Vaghodia 19 MECHANICAL ENGINEERING 2171909 Machine Design 15-05-2018

037 Parul, Vaghodia 19 MECHANICAL ENGINEERING 2181909 Project – II 14-05-2018, 15-05-2018




037 Parul, Vaghodia 19 MECHANICAL ENGINEERING 2181909 Project – II 15-05-2018

037 Parul, Vaghodia 19 MECHANICAL ENGINEERING 2181915 Automobile Engineering 10-05-2018

037 Parul, Vaghodia 19 MECHANICAL ENGINEERING 2181916 Energy Conservaton And Management 10-05-2018, 11-05-2018

037 Parul, Vaghodia 19 MECHANICAL ENGINEERING 2181920 Quality Engineering 10-05-2018, 11-05-2018

037 Parul, Vaghodia 19 MECHANICAL ENGINEERING 2181923 Entrepreneurship 10-05-2018, 11-05-2018, 12-05-2018

037 Parul, Vaghodia 19 MECHANICAL ENGINEERING 2181923 Entrepreneurship 10-05-2018, 11-05-2018

037 Parul, Vaghodia 19 MECHANICAL ENGINEERING 2181923 Entrepreneurship 10-05-2018, 11-05-2018

6Sem:

037 Parul, Vaghodia 31 COMPUTER SCIENCE & ENGINEERING



2160707 Advanced Java 11-06-2018

Page 22 of 57





2160708 Web Technology 12-06-2018


2160711 .Net Technology 08-06-2018

7Sem:


2170002 Project - I 10-05-2018


2170701 Compiler Design 11-05-2018







8Sem:




2180706 Project (Phase-II) 15-05-2018





5Sem:

041 SVIT, Vasad 01 AERONAUTICAL ENGINEERING



2150101 Flight Mechanics 07-06-2018


2150102 Fundamentals of Turbo Machines 11-06-2018


2150103 Aircraf Structures II 12-06-2018


2150104 Computatonal Fluid Dynamics II 08-06-2018


2150107 Aerodynamics I 13-06-2018

6Sem:


2160101 Aerodynamics II 13-06-2018


2160101 Aerodynamics II 13-06-2018, 14-06-2018


2160102 Fundamentals of Jet Propulsion 11-06-2018, 12-06-2018


2160104 Basic Control Theory 11-06-2018


2160104 Basic Control Theory 11-06-2018, 12-06-2018


2160106 Avionics 15-06-2018


2160109 Theory of Vibraton 07-06-2018, 08-06-2018


2160110 Aviaton Meterology, Navigaton and Communicaton

14-06-2018

7Sem:


170102 Theory Of Heat Transfer 11-05-2018

Page 23 of 57




8Sem:


2180101 Aircraf Design II 10-05-2018, 11-05-2018


2180101 Aircraf Design II 11-05-2018


2180104 Aircraf Control And Navigaton 16-05-2018


2180105 High Speed Aerodynamics 19-05-2018


2180107 Project – II 17-05-2018, 18-05-2018

5Sem:

041 SVIT, Vasad 06 CIVIL ENGINEERING 2150601 Highway Engineering 14-06-20186Sem:

041 SVIT, Vasad 06 CIVIL ENGINEERING 2160601 Advanced Constructon and Equipments 07-06-2018

041 SVIT, Vasad 06 CIVIL ENGINEERING 2160602 Applied Fluid Mechanics 08-06-2018

041 SVIT, Vasad 06 CIVIL ENGINEERING 2160603 Railway, Bridge & Tunnel Engineering 11-06-2018

041 SVIT, Vasad 06 CIVIL ENGINEERING 2160604 Water & Waste Water Engineering 12-06-2018

041 SVIT, Vasad 06 CIVIL ENGINEERING 2160607 Elementary Structural Design 13-06-2018

041 SVIT, Vasad 06 CIVIL ENGINEERING 2160608 Urban Transportaton system 14-06-2018

041 SVIT, Vasad 06 CIVIL ENGINEERING 2160609 Computatonal Mechanics 14-06-20188Sem:

041 SVIT, Vasad 06 CIVIL ENGINEERING 2180602 Harbour & Airport Engineering 19-05-2018

041 SVIT, Vasad 06 CIVIL ENGINEERING 2180605 Project – II 18-05-2018

041 SVIT, Vasad 06 CIVIL ENGINEERING 2180607 Repairs & Rehabilitaton Of Concrete Structures 21-05-2018

041 SVIT, Vasad 06 CIVIL ENGINEERING 2180609 Foundaton Engineering 10-05-2018

041 SVIT, Vasad 06 CIVIL ENGINEERING 2180609 Foundaton Engineering 11-05-2018

041 SVIT, Vasad 06 CIVIL ENGINEERING 2180610 Design of Steel Structures 15-05-2018

041 SVIT, Vasad 06 CIVIL ENGINEERING 2180611 Constructon Management 16-05-20186Sem:

041 SVIT, Vasad 07 COMPUTER ENGINEERING 2160701 Sofware Engineering 07-06-2018

041 SVIT, Vasad 07 COMPUTER ENGINEERING 2160707 Advanced Java 12-06-2018

041 SVIT, Vasad 07 COMPUTER ENGINEERING 2160708 Web Technology 13-06-2018

041 SVIT, Vasad 07 COMPUTER ENGINEERING 2160711 .Net Technology 11-06-20188Sem:

041 SVIT, Vasad 07 COMPUTER ENGINEERING 2180703 Artfcial Intelligence 10-05-2018

041 SVIT, Vasad 07 COMPUTER ENGINEERING 2180706 Project (Phase-II) 11-05-2018

041 SVIT, Vasad 07 COMPUTER ENGINEERING 2180710 Big Data Analytcs 14-05-2018

041 SVIT, Vasad 07 COMPUTER ENGINEERING 2180711 Python Programming 14-05-20185Sem:

041 SVIT, Vasad 09 ELECTRICAL ENGINEERING 2150903 Power Electronics – I 11-06-2018

041 SVIT, Vasad 09 ELECTRICAL ENGINEERING 2150904 Elements of Electrical Design 15-06-2018

041 SVIT, Vasad 09 ELECTRICAL ENGINEERING 2150907 Microprocessor and Microcontroller Architecture & Interfacing

14-06-2018

041 SVIT, Vasad 09 ELECTRICAL ENGINEERING 2150909 Control System Engineering 14-06-20186Sem:

041 SVIT, Vasad 09 ELECTRICAL ENGINEERING 2160902 Power Electronics – II 11-06-2018, 12-06-2018,13-06-2018

041 SVIT, Vasad 09 ELECTRICAL ENGINEERING 2160904 High Voltage Engineering 11-06-2018

Page 24 of 57




041 SVIT, Vasad 09 ELECTRICAL ENGINEERING 2160904 High Voltage Engineering 11-06-2018, 12-06-2018,13-06-2018

041 SVIT, Vasad 09 ELECTRICAL ENGINEERING 2160908 Electrical Power system – II 11-06-2018, 12-06-2018,13-06-2018

041 SVIT, Vasad 09 ELECTRICAL ENGINEERING 2160909 Advance Microcontrollers 14-06-2018,

041 SVIT, Vasad 09 ELECTRICAL ENGINEERING 2160911 Computer Aided Analysis and Design for Electrical Engg.

14-06-2018,

041 SVIT, Vasad 09 ELECTRICAL ENGINEERING 2160911 Computer Aided Analysis and Design for Electrical Engg.

14-06-2018, 15-06-2018

041 SVIT, Vasad 09 ELECTRICAL ENGINEERING 2160912 Design of DC Machines and Transformer 7-06-2018,

041 SVIT, Vasad 09 ELECTRICAL ENGINEERING 2160912 Design of DC Machines and Transformer 7-06-2018, 8-06-2018, 9-06-2018

041 SVIT, Vasad 09 ELECTRICAL ENGINEERING 2160913 Control of Electrical Drives 14-06-2018,

8Sem:

041 SVIT, Vasad 09 ELECTRICAL ENGINEERING 2180901 Testng and Commissioning of Electrical Equipments

14-05-2018 15-05-2018 16-05-2018

041 SVIT, Vasad 09 ELECTRICAL ENGINEERING 2180903 Power System Planning and Design 14-05-2018 15-05-2018 16-05-2018

041 SVIT, Vasad 09 ELECTRICAL ENGINEERING 2180905 Project 14-05-2018 15-05-2018 16-05-2018

041 SVIT, Vasad 09 ELECTRICAL ENGINEERING 2180910 Energy Conservaton, And Audit 17-05-2018 18-05-2018

041 SVIT, Vasad 09 ELECTRICAL ENGINEERING 2180911 Power Quality And Management 17-05-20186Sem:

041 SVIT, Vasad 11 ELECTRONICS & COMMUNICATION ENGINEERING














14-06-2018

7Sem:


2170001 Project - I 21-05-2018

Page 25 of 57








8Sem:




2181106 Device Driver & Writng 19-05-2018


2181108 Project II 21-05-2018

6Sem:

041 SVIT, Vasad 16 INFORMATION TECHNOLOGY



2160707 Advanced Java 12-06-2018


2160708 Web Technology 13-06-2018


2160711 .Net Technology 08-06-2018



7Sem:


2170002 Project - I 15-05-2018




2170713 Service Oriented Computng 17-05-2018



8Sem:








2181606 Project (Phase-II) 15-05-2018

5Sem:

041 SVIT, Vasad 17 INSTRUMENTATION & CONTROL ENGINEERING

2150002 Cyber Security 13-06-2018


2151704 Control System Components 08-06-2018


2151705 Process Control Systems 11-06-2018


2151706 Industrial Measurement II 12-06-2018


2151707 Microcontroller & Interfacing (IC) 13-06-2018

6Sem:


2161704 Analog and Digital communicaton 07-06-2018


2161707 Control System Design 08-06-2018

Page 26 of 57





2161708 Power Electronics 11-06-2018


2161709 Programmable Logic Controller 12-06-2018


2161711 Environmental Instrumentaton 13-06-2018


2161712 Bio-Potental Instrumentaton 13-06-2018

8Sem:


2181704 Project Engineering and Management 10-05-2018


2181705 Advance Control Theory 11-05-2018


2181710 Sof Computng In Control 15-05-2018


2181711 Project II 14-05-2018

5Sem:

041 SVIT, Vasad 19 MECHANICAL ENGINEERING 2151902 Theory of Machines 07-06-2018

041 SVIT, Vasad 19 MECHANICAL ENGINEERING 2151903 Fluid Power Engineering 12-06-2018

041 SVIT, Vasad 19 MECHANICAL ENGINEERING 2151907 Design of Machine Elements 08-06-2018

041 SVIT, Vasad 19 MECHANICAL ENGINEERING 2151908 Control Engineering 11-06-2018

041 SVIT, Vasad 19 MECHANICAL ENGINEERING 2151909 Heat Transfer 07-06-20186Sem:

041 SVIT, Vasad 19 MECHANICAL ENGINEERING 2161901 Dynamics of Machinery 07-06-2018, 08-06-2018, 09-06-2018

041 SVIT, Vasad 19 MECHANICAL ENGINEERING 2161902 Internal Combuston Engines 11-06-2018, 12-06-2018, 13-06-2018

041 SVIT, Vasad 19 MECHANICAL ENGINEERING 2161902 Internal Combuston Engines 12-06-2018

041 SVIT, Vasad 19 MECHANICAL ENGINEERING 2161903 Computer Aided Design 07-06-2018, 08-06-2018, 09-06-2018

041 SVIT, Vasad 19 MECHANICAL ENGINEERING 2161907 Industrial Engineering 11-06-2018, 12-06-2018, 13-06-2018

041 SVIT, Vasad 19 MECHANICAL ENGINEERING 2161908 Refrigeraton and Air Conditoning 07-06-2018, 08-06-2018, 09-06-2018

041 SVIT, Vasad 19 MECHANICAL ENGINEERING 2161909 Producton Technology 11-06-2018

041 SVIT, Vasad 19 MECHANICAL ENGINEERING 2161909 Producton Technology 11-06-2018, 12-06-2018, 13-06-2018

8Sem:

041 SVIT, Vasad 19 MECHANICAL ENGINEERING 2181909 Project – II 14-05-2018

041 SVIT, Vasad 19 MECHANICAL ENGINEERING 2181915 Automobile Engineering 12-05-2018

041 SVIT, Vasad 19 MECHANICAL ENGINEERING 2181920 Quality Engineering 11-05-2018

Page 27 of 57




041 SVIT, Vasad 19 MECHANICAL ENGINEERING 2181920 Quality Engineering 11-05-2018, 12-05-2018

5Sem:

050 Sigma, Vadodara 06 CIVIL ENGINEERING 2150602 Hydrology & Water Resources Engineering 12-06-20186Sem:

050 Sigma, Vadodara 06 CIVIL ENGINEERING 2160601 Advanced Constructon and Equipments 07-06-2018

050 Sigma, Vadodara 06 CIVIL ENGINEERING 2160602 Applied Fluid Mechanics 08-06-2018

050 Sigma, Vadodara 06 CIVIL ENGINEERING 2160603 Railway, Bridge & Tunnel Engineering 11-06-2018

050 Sigma, Vadodara 06 CIVIL ENGINEERING 2160604 Water & Waste Water Engineering 12-06-2018

050 Sigma, Vadodara 06 CIVIL ENGINEERING 2160607 Elementary Structural Design 13-06-2018

050 Sigma, Vadodara 06 CIVIL ENGINEERING 2160608 Urban Transportaton system 14-06-20187Sem:

050 Sigma, Vadodara 06 CIVIL ENGINEERING 2170610 Professional Practces & Valuaton 18-05-20188Sem:

050 Sigma, Vadodara 06 CIVIL ENGINEERING 2180602 Harbour & Airport Engineering 19-05-2018

050 Sigma, Vadodara 06 CIVIL ENGINEERING 2180605 Project – II 18-05-2018

050 Sigma, Vadodara 06 CIVIL ENGINEERING 2180609 Foundaton Engineering 11-05-2018

050 Sigma, Vadodara 06 CIVIL ENGINEERING 2180610 Design of Steel Structures 14-05-2018

050 Sigma, Vadodara 06 CIVIL ENGINEERING 2180610 Design of Steel Structures 15-05-2018

050 Sigma, Vadodara 06 CIVIL ENGINEERING 2180611 Constructon Management 17-05-20186Sem:

050 Sigma, Vadodara 07 COMPUTER ENGINEERING 2160701 Sofware Engineering 07-06-2018

050 Sigma, Vadodara 07 COMPUTER ENGINEERING 2160707 Advanced Java 11-06-2018

050 Sigma, Vadodara 07 COMPUTER ENGINEERING 2160708 Web Technology 12-06-2018

050 Sigma, Vadodara 07 COMPUTER ENGINEERING 2160711 .Net Technology 08-06-20187Sem:

050 Sigma, Vadodara 07 COMPUTER ENGINEERING 2170002 Project - I 10-05-2018

050 Sigma, Vadodara 07 COMPUTER ENGINEERING 2170701 Compiler Design 11-05-2018

050 Sigma, Vadodara 07 COMPUTER ENGINEERING 2170709 Informaton and Network Security 14-05-2018

050 Sigma, Vadodara 07 COMPUTER ENGINEERING 2170710 Mobile Computng and Wireless Communicaton 15-05-2018

050 Sigma, Vadodara 07 COMPUTER ENGINEERING 2170715 Data Mining and Business Intelligence 16-05-20188Sem:

050 Sigma, Vadodara 07 COMPUTER ENGINEERING 2180703 Artfcial Intelligence 10-05-2018

050 Sigma, Vadodara 07 COMPUTER ENGINEERING 2180703 Artfcial Intelligence 11-05-2018

050 Sigma, Vadodara 07 COMPUTER ENGINEERING 2180706 Project (Phase-II) 14-05-2018

050 Sigma, Vadodara 07 COMPUTER ENGINEERING 2180710 Big Data Analytcs 15-05-20185Sem:

050 Sigma, Vadodara 09 ELECTRICAL ENGINEERING 2150903 Power Electronics – I 07-06-2018

050 Sigma, Vadodara 09 ELECTRICAL ENGINEERING 2150904 Elements of Electrical Design 08-06-2018

050 Sigma, Vadodara 09 ELECTRICAL ENGINEERING 2150907 Microprocessor and Microcontroller Architecture & Interfacing

09-06-2018

050 Sigma, Vadodara 09 ELECTRICAL ENGINEERING 2150909 Control System Engineering 11-06-20186Sem:

050 Sigma, Vadodara 09 ELECTRICAL ENGINEERING 2160902 Power Electronics – II 7-06-2018, 8-06-2018

050 Sigma, Vadodara 09 ELECTRICAL ENGINEERING 2160904 High Voltage Engineering 7-06-2018, 8-06-2018

050 Sigma, Vadodara 09 ELECTRICAL ENGINEERING 2160908 Electrical Power system – II 11-06-2018, 12-06-2018

050 Sigma, Vadodara 09 ELECTRICAL ENGINEERING 2160912 Design of DC Machines and Transformer 11-06-2018, 12-06-2018

Page 28 of 57




050 Sigma, Vadodara 09 ELECTRICAL ENGINEERING 2160913 Control of Electrical Drives 13-06-2018, 14-06-2018

8Sem:

050 Sigma, Vadodara 09 ELECTRICAL ENGINEERING 2180901 Testng and Commissioning of Electrical Equipments

14-05-2018 15-05-2018

050 Sigma, Vadodara 09 ELECTRICAL ENGINEERING 2180903 Power System Planning and Design 14-05-2018 15-05-2018

050 Sigma, Vadodara 09 ELECTRICAL ENGINEERING 2180905 Project 10-05-2018,11-05-2018

050 Sigma, Vadodara 09 ELECTRICAL ENGINEERING 2180911 Power Quality And Management 10-05-2018,11-05-2018

5Sem:

050 Sigma, Vadodara 11 ELECTRONICS & COMMUNICATION ENGINEERING




6Sem:











13-06-2018

8Sem:




2181108 Project II 17-05-2018

6Sem:

050 Sigma, Vadodara 16 INFORMATION TECHNOLOGY



2160707 Advanced Java 13-06-2018


2160708 Web Technology 07-06-2018


2160711 .Net Technology 11-06-2018



8Sem:






2181606 Project (Phase-II) 16-05-2018

5Sem:

Page 29 of 57




050 Sigma, Vadodara 19 MECHANICAL ENGINEERING 2151902 Theory of Machines 08-06-2018

050 Sigma, Vadodara 19 MECHANICAL ENGINEERING 2151903 Fluid Power Engineering 13-06-2018

050 Sigma, Vadodara 19 MECHANICAL ENGINEERING 2151907 Design of Machine Elements 08-06-2018

050 Sigma, Vadodara 19 MECHANICAL ENGINEERING 2151908 Control Engineering 08-06-2018

050 Sigma, Vadodara 19 MECHANICAL ENGINEERING 2151909 Heat Transfer 11-06-20186Sem:

050 Sigma, Vadodara 19 MECHANICAL ENGINEERING 2161901 Dynamics of Machinery 08-06-2018

050 Sigma, Vadodara 19 MECHANICAL ENGINEERING 2161901 Dynamics of Machinery 08-06-2018, 09-06-2018

050 Sigma, Vadodara 19 MECHANICAL ENGINEERING 2161901 Dynamics of Machinery 08-06-2018, 09-06-2018

050 Sigma, Vadodara 19 MECHANICAL ENGINEERING 2161902 Internal Combuston Engines 11-06-2018

050 Sigma, Vadodara 19 MECHANICAL ENGINEERING 2161902 Internal Combuston Engines 11-06-2018, 12-06-2018

050 Sigma, Vadodara 19 MECHANICAL ENGINEERING 2161902 Internal Combuston Engines 11-06-2018, 12-06-2018

050 Sigma, Vadodara 19 MECHANICAL ENGINEERING 2161903 Computer Aided Design 08-06-2018

050 Sigma, Vadodara 19 MECHANICAL ENGINEERING 2161903 Computer Aided Design 08-06-2018, 09-06-2018

050 Sigma, Vadodara 19 MECHANICAL ENGINEERING 2161903 Computer Aided Design 08-06-2018, 09-06-2018

050 Sigma, Vadodara 19 MECHANICAL ENGINEERING 2161907 Industrial Engineering 13-06-2018

050 Sigma, Vadodara 19 MECHANICAL ENGINEERING 2161907 Industrial Engineering 13-06-2018, 14-06-2018

050 Sigma, Vadodara 19 MECHANICAL ENGINEERING 2161908 Refrigeraton and Air Conditoning 13-06-2018

050 Sigma, Vadodara 19 MECHANICAL ENGINEERING 2161908 Refrigeraton and Air Conditoning 13-06-2018, 14-06-2018

050 Sigma, Vadodara 19 MECHANICAL ENGINEERING 2161908 Refrigeraton and Air Conditoning 13-06-2018, 14-06-2018

050 Sigma, Vadodara 19 MECHANICAL ENGINEERING 2161909 Producton Technology 11-06-2018

050 Sigma, Vadodara 19 MECHANICAL ENGINEERING 2161909 Producton Technology 11-06-2018, 12-06-2018

8Sem:

050 Sigma, Vadodara 19 MECHANICAL ENGINEERING 2181909 Project – II 14-05-2018

050 Sigma, Vadodara 19 MECHANICAL ENGINEERING 2181909 Project – II 14-05-2018, 15-05-2018

050 Sigma, Vadodara 19 MECHANICAL ENGINEERING 2181915 Automobile Engineering 11-05-2018

050 Sigma, Vadodara 19 MECHANICAL ENGINEERING 2181920 Quality Engineering 11-05-2018

050 Sigma, Vadodara 19 MECHANICAL ENGINEERING 2181920 Quality Engineering 11-05-2018, 12-05-2018

5Sem:

055 EC-Tuwa, Godhara 06 CIVIL ENGINEERING 2150601 Highway Engineering 14-06-2018

055 EC-Tuwa, Godhara 06 CIVIL ENGINEERING 2150602 Hydrology & Water Resources Engineering 12-06-2018

055 EC-Tuwa, Godhara 06 CIVIL ENGINEERING 2150603 Environmental Engineering 12-06-2018

055 EC-Tuwa, Godhara 06 CIVIL ENGINEERING 2150608 Structural Analysis-II 13-06-2018

055 EC-Tuwa, Godhara 06 CIVIL ENGINEERING 2150609 Soil Mechanics 14-06-2018

Page 30 of 57




6Sem:

055 EC-Tuwa, Godhara 06 CIVIL ENGINEERING 2160601 Advanced Constructon and Equipments 07-06-2018

055 EC-Tuwa, Godhara 06 CIVIL ENGINEERING 2160602 Applied Fluid Mechanics 08-06-2018

055 EC-Tuwa, Godhara 06 CIVIL ENGINEERING 2160603 Railway, Bridge & Tunnel Engineering 11-06-2018

055 EC-Tuwa, Godhara 06 CIVIL ENGINEERING 2160604 Water & Waste Water Engineering 12-06-2018

055 EC-Tuwa, Godhara 06 CIVIL ENGINEERING 2160607 Elementary Structural Design 13-06-2018

055 EC-Tuwa, Godhara 06 CIVIL ENGINEERING 2160608 Urban Transportaton system 14-06-20188Sem:

055 EC-Tuwa, Godhara 06 CIVIL ENGINEERING 2180602 Harbour & Airport Engineering 19-05-2018

055 EC-Tuwa, Godhara 06 CIVIL ENGINEERING 2180605 Project – II 18-05-2018

055 EC-Tuwa, Godhara 06 CIVIL ENGINEERING 2180609 Foundaton Engineering 10-05-2018

055 EC-Tuwa, Godhara 06 CIVIL ENGINEERING 2180609 Foundaton Engineering 11-05-2018

055 EC-Tuwa, Godhara 06 CIVIL ENGINEERING 2180610 Design of Steel Structures 14-05-2018

055 EC-Tuwa, Godhara 06 CIVIL ENGINEERING 2180610 Design of Steel Structures 15-05-2018

055 EC-Tuwa, Godhara 06 CIVIL ENGINEERING 2180611 Constructon Management 16-05-2018

055 EC-Tuwa, Godhara 06 CIVIL ENGINEERING 2180611 Constructon Management 17-05-20185Sem:

055 EC-Tuwa, Godhara 07 COMPUTER ENGINEERING 2150002 Insttute Electve - Cyber Security 07-06-2018

055 EC-Tuwa, Godhara 07 COMPUTER ENGINEERING 2150703 Analysis and Design of Algorithms 08-06-2018

055 EC-Tuwa, Godhara 07 COMPUTER ENGINEERING 2150704 Object Oriented Programming using JAVA 11-06-2018

055 EC-Tuwa, Godhara 07 COMPUTER ENGINEERING 2150707 Microprocessor and Interfacing 12-06-2018

055 EC-Tuwa, Godhara 07 COMPUTER ENGINEERING 2150708 System Programming 13-06-20186Sem:

055 EC-Tuwa, Godhara 07 COMPUTER ENGINEERING 2160701 Sofware Engineering 07-06-2018

055 EC-Tuwa, Godhara 07 COMPUTER ENGINEERING 2160707 Advanced Java 12-06-2018

055 EC-Tuwa, Godhara 07 COMPUTER ENGINEERING 2160708 Web Technology 13-06-2018

055 EC-Tuwa, Godhara 07 COMPUTER ENGINEERING 2160710 Distributed operatng system 11-06-20188Sem:

055 EC-Tuwa, Godhara 07 COMPUTER ENGINEERING 2180703 Artfcial Intelligence 10-05-2018

055 EC-Tuwa, Godhara 07 COMPUTER ENGINEERING 2180706 Project (Phase-II) 11-05-2018

055 EC-Tuwa, Godhara 07 COMPUTER ENGINEERING 2180715 Android Programming 15-05-20185Sem:

055 EC-Tuwa, Godhara 09 ELECTRICAL ENGINEERING 2150002 Insttute Electve - Cyber Security 13-06-2018

055 EC-Tuwa, Godhara 09 ELECTRICAL ENGINEERING 2150903 Power Electronics – I 07-06-2018

055 EC-Tuwa, Godhara 09 ELECTRICAL ENGINEERING 2150904 Elements of Electrical Design 08-06-2018

055 EC-Tuwa, Godhara 09 ELECTRICAL ENGINEERING 2150907 Microprocessor and Microcontroller Architecture & Interfacing

09-06-2018

055 EC-Tuwa, Godhara 09 ELECTRICAL ENGINEERING 2150909 Control System Engineering 11-06-20186Sem:

055 EC-Tuwa, Godhara 09 ELECTRICAL ENGINEERING 2160902 Power Electronics – II 7-06-2018,

055 EC-Tuwa, Godhara 09 ELECTRICAL ENGINEERING 2160904 High Voltage Engineering 8-06-2018,

055 EC-Tuwa, Godhara 09 ELECTRICAL ENGINEERING 2160908 Electrical Power system – II 9-06-2018,

055 EC-Tuwa, Godhara 09 ELECTRICAL ENGINEERING 2160912 Design of DC Machines and Transformer 11-06-2018

055 EC-Tuwa, Godhara 09 ELECTRICAL ENGINEERING 2160913 Control of Electrical Drives 12-06-2018,

7Sem:

055 EC-Tuwa, Godhara 09 ELECTRICAL ENGINEERING 2170908 Switch Gear and Protecton 15-05-2018

055 EC-Tuwa, Godhara 09 ELECTRICAL ENGINEERING 2170909 Design of AC Machines 16-05-2018

055 EC-Tuwa, Godhara 09 ELECTRICAL ENGINEERING 2170913 Industrial Instrumentaton 17-05-20188Sem:

Page 31 of 57




055 EC-Tuwa, Godhara 09 ELECTRICAL ENGINEERING 2180901 Testng and Commissioning of Electrical Equipments

15-05-2018

055 EC-Tuwa, Godhara 09 ELECTRICAL ENGINEERING 2180903 Power System Planning and Design 16-05-2018

055 EC-Tuwa, Godhara 09 ELECTRICAL ENGINEERING 2180905 Project 17-05-2018

055 EC-Tuwa, Godhara 09 ELECTRICAL ENGINEERING 2180910 Energy Conservaton, And Audit 18-05-20187Sem:

055 EC-Tuwa, Godhara 11 ELECTRONICS & COMMUNICATION ENGINEERING

2171001 Microwave Engineering 21-05-2018

8Sem:




2181108 Project II 19-05-2018

6Sem:

055 EC-Tuwa, Godhara 19 MECHANICAL ENGINEERING 2161901 Dynamics of Machinery 07-06-2018

055 EC-Tuwa, Godhara 19 MECHANICAL ENGINEERING 2161902 Internal Combuston Engines 08-06-2018

055 EC-Tuwa, Godhara 19 MECHANICAL ENGINEERING 2161903 Computer Aided Design 09-06-2018

055 EC-Tuwa, Godhara 19 MECHANICAL ENGINEERING 2161907 Industrial Engineering 11-06-2018

055 EC-Tuwa, Godhara 19 MECHANICAL ENGINEERING 2161908 Refrigeraton and Air Conditoning 12-06-2018

055 EC-Tuwa, Godhara 19 MECHANICAL ENGINEERING 2161909 Producton Technology 13-06-20187Sem:

055 EC-Tuwa, Godhara 19 MECHANICAL ENGINEERING 2170001 Project - I 14-05-2018

055 EC-Tuwa, Godhara 19 MECHANICAL ENGINEERING 2171901 Operaton Research 18-05-2018

055 EC-Tuwa, Godhara 19 MECHANICAL ENGINEERING 2171903 Computer Aided Manufacturing 14-05-2018

055 EC-Tuwa, Godhara 19 MECHANICAL ENGINEERING 2171909 Machine Design 14-05-2018

055 EC-Tuwa, Godhara 19 MECHANICAL ENGINEERING 2171910 Power Plant Engineering 14-05-2018

055 EC-Tuwa, Godhara 19 MECHANICAL ENGINEERING 2171912 Oil Hydraulics & Pneumatcs 19-05-20188Sem:

055 EC-Tuwa, Godhara 19 MECHANICAL ENGINEERING 2181909 Project – II 14-05-2018

055 EC-Tuwa, Godhara 19 MECHANICAL ENGINEERING 2181915 Automobile Engineering 18-05-20186Sem:

060 GEC-Godhara 06 CIVIL ENGINEERING 2160601 Advanced Constructon and Equipments 07-06-2018

060 GEC-Godhara 06 CIVIL ENGINEERING 2160602 Applied Fluid Mechanics 08-06-2018

060 GEC-Godhara 06 CIVIL ENGINEERING 2160603 Railway, Bridge & Tunnel Engineering 11-06-2018

060 GEC-Godhara 06 CIVIL ENGINEERING 2160604 Water & Waste Water Engineering 12-06-2018

060 GEC-Godhara 06 CIVIL ENGINEERING 2160607 Elementary Structural Design 13-06-2018

060 GEC-Godhara 06 CIVIL ENGINEERING 2160608 Urban Transportaton system 14-06-2018

060 GEC-Godhara 06 CIVIL ENGINEERING 2160609 Computatonal Mechanics 14-06-20188Sem:

060 GEC-Godhara 06 CIVIL ENGINEERING 180603 Professional Practce & Valuaton 19-05-2018

060 GEC-Godhara 06 CIVIL ENGINEERING 180604 Structural Design-II 19-05-2018

060 GEC-Godhara 06 CIVIL ENGINEERING 180605 Project -II 18-05-2018

060 GEC-Godhara 06 CIVIL ENGINEERING 2180602 Harbour & Airport Engineering 19-05-2018

060 GEC-Godhara 06 CIVIL ENGINEERING 2180605 Project – II 18-05-2018

060 GEC-Godhara 06 CIVIL ENGINEERING 2180607 Repairs & Rehabilitaton Of Concrete Structures 21-05-2018

060 GEC-Godhara 06 CIVIL ENGINEERING 2180609 Foundaton Engineering 11-05-2018

060 GEC-Godhara 06 CIVIL ENGINEERING 2180610 Design of Steel Structures 14-05-2018

060 GEC-Godhara 06 CIVIL ENGINEERING 2180610 Design of Steel Structures 15-05-2018

060 GEC-Godhara 06 CIVIL ENGINEERING 2180611 Constructon Management 16-05-20186Sem:

Page 32 of 57




060 GEC-Godhara 09 ELECTRICAL ENGINEERING 2160902 Power Electronics – II 7-06-2018,

060 GEC-Godhara 09 ELECTRICAL ENGINEERING 2160904 High Voltage Engineering 8-06-2018,

060 GEC-Godhara 09 ELECTRICAL ENGINEERING 2160908 Electrical Power system – II 9-06-2018,

060 GEC-Godhara 09 ELECTRICAL ENGINEERING 2160912 Design of DC Machines and Transformer 11-06-2018

060 GEC-Godhara 09 ELECTRICAL ENGINEERING 2160913 Control of Electrical Drives 12-06-2018,

8Sem:

060 GEC-Godhara 09 ELECTRICAL ENGINEERING 2180901 Testng and Commissioning of Electrical Equipments

16-05-2018 17-05-2018

060 GEC-Godhara 09 ELECTRICAL ENGINEERING 2180903 Power System Planning and Design 16-05-2018 17-05-2018

060 GEC-Godhara 09 ELECTRICAL ENGINEERING 2180905 Project 18-05-2018 19-05-2018

060 GEC-Godhara 09 ELECTRICAL ENGINEERING 2180911 Power Quality And Management 18-05-2018 19-05-2018

6Sem:

060 GEC-Godhara 11 ELECTRONICS & COMMUNICATION ENGINEERING












14-06-2018

7Sem:


2171001 Microwave Engineering 16-05-2018




2171004 Wireless Communicaton 17-05-2018


2171007 Satellite Communicaton 14-05-2018

8Sem:


181105 Project -II 15-05-2018






2181108 Project II 15-05-2018

5Sem:

060 GEC-Godhara 19 MECHANICAL ENGINEERING 2151902 Theory of Machines 12-06-2018

Page 33 of 57




6Sem:

060 GEC-Godhara 19 MECHANICAL ENGINEERING 2161901 Dynamics of Machinery 08-06-2018

060 GEC-Godhara 19 MECHANICAL ENGINEERING 2161902 Internal Combuston Engines 12-06-2018

060 GEC-Godhara 19 MECHANICAL ENGINEERING 2161903 Computer Aided Design 11-06-2018

060 GEC-Godhara 19 MECHANICAL ENGINEERING 2161907 Industrial Engineering 13-06-2018

060 GEC-Godhara 19 MECHANICAL ENGINEERING 2161908 Refrigeraton and Air Conditoning 14-06-2018

060 GEC-Godhara 19 MECHANICAL ENGINEERING 2161909 Producton Technology 09-06-20187Sem:

060 GEC-Godhara 19 MECHANICAL ENGINEERING 2171910 Power Plant Engineering 10-05-20188Sem:

060 GEC-Godhara 19 MECHANICAL ENGINEERING 2181909 Project – II 14-05-2018

060 GEC-Godhara 19 MECHANICAL ENGINEERING 2181913 Product Design And Value Engineering 11-05-2018

060 GEC-Godhara 19 MECHANICAL ENGINEERING 2181915 Automobile Engineering 11-05-2018

060 GEC-Godhara 19 MECHANICAL ENGINEERING 2181916 Energy Conservaton And Management 10-05-2018

060 GEC-Godhara 19 MECHANICAL ENGINEERING 2181920 Quality Engineering 10-05-2018

060 GEC-Godhara 19 MECHANICAL ENGINEERING 2181923 Entrepreneurship 11-05-20186Sem:

063 MBICT, New V.V.Nagar 07 COMPUTER ENGINEERING 2160701 Sofware Engineering 07-06-2018

063 MBICT, New V.V.Nagar 07 COMPUTER ENGINEERING 2160707 Advanced Java 11-06-2018

063 MBICT, New V.V.Nagar 07 COMPUTER ENGINEERING 2160708 Web Technology 12-06-2018

063 MBICT, New V.V.Nagar 07 COMPUTER ENGINEERING 2160711 .Net Technology 08-06-20188Sem:

063 MBICT, New V.V.Nagar 07 COMPUTER ENGINEERING 2180703 Artfcial Intelligence 11-05-2018

063 MBICT, New V.V.Nagar 07 COMPUTER ENGINEERING 2180706 Project (Phase-II) 14-05-2018

063 MBICT, New V.V.Nagar 07 COMPUTER ENGINEERING 2180709 Iot And Applicatons 15-05-2018

063 MBICT, New V.V.Nagar 07 COMPUTER ENGINEERING 2180710 Big Data Analytcs 15-05-2018

063 MBICT, New V.V.Nagar 07 COMPUTER ENGINEERING 2180713 Web Data Management 15-05-20186Sem:

063 MBICT, New V.V.Nagar 11 ELECTRONICS & COMMUNICATION ENGINEERING










8Sem:




2181108 Project II 10-05-2018

5Sem:

063 MBICT, New V.V.Nagar 16 INFORMATION TECHNOLOGY




Page 34 of 57










6Sem:




2160707 Advanced Java 13-06-2018


2160708 Web Technology 07-06-2018


2160711 .Net Technology 11-06-2018



8Sem:




2181606 Project (Phase-II) 14-05-2018


2181607 Multmedia And Animaton 10-05-2018

6Sem:

063 MBICT, New V.V.Nagar 31 COMPUTER SCIENCE & ENGINEERING



2160707 Advanced Java 11-06-2018


2160708 Web Technology 12-06-2018


2160711 .Net Technology 08-06-2018

8Sem:




2180706 Project (Phase-II) 14-05-2018





6Sem:

063 MBICT, New V.V.Nagar 32 INFORMATION & COMMUNICATION TECHNOLOGY

2160708 Web Technology 07-06-2018


2163201 Operaton Research 08-06-2018


2163203 Engineering Electromagnetcs And Wave Propagaton

11-06-2018


2163204 Telecommunicaton Engineering 12-06-2018


2163206 Analog and Digital Communicaton (ICT) 13-06-2018

8Sem:



Page 35 of 57







2183206 Project (Phase-II) 14-05-2018

5Sem:

064 KJIET, Savali 02 AUTOMOBILE ENGINEERING 2150202 Automobile Systems 11-06-2018

064 KJIET, Savali 02 AUTOMOBILE ENGINEERING 2150206 Automotve manufacturing 11-06-2018

064 KJIET, Savali 02 AUTOMOBILE ENGINEERING 2150208 Automotve Electrical Systems 11-06-2018

064 KJIET, Savali 02 AUTOMOBILE ENGINEERING 2151909 Heat Transfer 13-06-20186Sem:

064 KJIET, Savali 02 AUTOMOBILE ENGINEERING 2160207 Alternatve fuel and power systems 13-06-2018

064 KJIET, Savali 02 AUTOMOBILE ENGINEERING 2160208 Automotve computer controlled Systems 11-06-2018

064 KJIET, Savali 02 AUTOMOBILE ENGINEERING 2161901 Dynamics of Machinery 09-06-2018

064 KJIET, Savali 02 AUTOMOBILE ENGINEERING 2161903 Computer Aided Design 07-06-2018

064 KJIET, Savali 02 AUTOMOBILE ENGINEERING 2161908 Refrigeraton and Air Conditoning 08-06-20188Sem:

064 KJIET, Savali 02 AUTOMOBILE ENGINEERING 2180201 Project – II 14-05-2018

064 KJIET, Savali 02 AUTOMOBILE ENGINEERING 2180206 Automobile system Design 10-05-2018

064 KJIET, Savali 02 AUTOMOBILE ENGINEERING 2180207 Applied Industrial Engineering In Automobile 16-05-2018

064 KJIET, Savali 02 AUTOMOBILE ENGINEERING 2180215 Automotve And Combuston Engine Technology 11-05-20185Sem:

064 KJIET, Savali 06 CIVIL ENGINEERING 2150608 Structural Analysis-II 13-06-20186Sem:

064 KJIET, Savali 06 CIVIL ENGINEERING 2160601 Advanced Constructon and Equipments 07-06-2018

064 KJIET, Savali 06 CIVIL ENGINEERING 2160602 Applied Fluid Mechanics 08-06-2018

064 KJIET, Savali 06 CIVIL ENGINEERING 2160603 Railway, Bridge & Tunnel Engineering 11-06-2018

064 KJIET, Savali 06 CIVIL ENGINEERING 2160604 Water & Waste Water Engineering 12-06-2018

064 KJIET, Savali 06 CIVIL ENGINEERING 2160607 Elementary Structural Design 13-06-2018

064 KJIET, Savali 06 CIVIL ENGINEERING 2160608 Urban Transportaton system 14-06-20187Sem:

064 KJIET, Savali 06 CIVIL ENGINEERING 2170003 Project - I 18-05-2018

064 KJIET, Savali 06 CIVIL ENGINEERING 2170607 Design of Reinforced Concrete Structures 14-05-2018

064 KJIET, Savali 06 CIVIL ENGINEERING 2170609 Irrigaton Engineering 19-05-2018

064 KJIET, Savali 06 CIVIL ENGINEERING 2170610 Professional Practces & Valuaton 16-05-2018

064 KJIET, Savali 06 CIVIL ENGINEERING 2170613 Trafc Engineering 18-05-20188Sem:

064 KJIET, Savali 06 CIVIL ENGINEERING 2180602 Harbour & Airport Engineering 19-05-2018

064 KJIET, Savali 06 CIVIL ENGINEERING 2180605 Project – II 18-05-2018

064 KJIET, Savali 06 CIVIL ENGINEERING 2180609 Foundaton Engineering 10-05-2018

064 KJIET, Savali 06 CIVIL ENGINEERING 2180610 Design of Steel Structures 14-05-2018

064 KJIET, Savali 06 CIVIL ENGINEERING 2180611 Constructon Management 16-05-20186Sem:

064 KJIET, Savali 07 COMPUTER ENGINEERING 2160701 Sofware Engineering 07-06-2018

064 KJIET, Savali 07 COMPUTER ENGINEERING 2160707 Advanced Java 11-06-2018

064 KJIET, Savali 07 COMPUTER ENGINEERING 2160708 Web Technology 12-06-2018

064 KJIET, Savali 07 COMPUTER ENGINEERING 2160711 .Net Technology 08-06-20188Sem:

064 KJIET, Savali 07 COMPUTER ENGINEERING 2180703 Artfcial Intelligence 10-05-2018

064 KJIET, Savali 07 COMPUTER ENGINEERING 2180706 Project (Phase-II) 11-05-2018

064 KJIET, Savali 07 COMPUTER ENGINEERING 2180712 Cloud Infrastructure And Services 15-05-2018

Page 36 of 57




6Sem:

064 KJIET, Savali 09 ELECTRICAL ENGINEERING 2160902 Power Electronics – II 12-06-2018

064 KJIET, Savali 09 ELECTRICAL ENGINEERING 2160904 High Voltage Engineering 11-06-2018

064 KJIET, Savali 09 ELECTRICAL ENGINEERING 2160908 Electrical Power system – II 09-06-2018

064 KJIET, Savali 09 ELECTRICAL ENGINEERING 2160912 Design of DC Machines and Transformer 07-06-2018

064 KJIET, Savali 09 ELECTRICAL ENGINEERING 2160913 Control of Electrical Drives 08-06-20187Sem:

064 KJIET, Savali 09 ELECTRICAL ENGINEERING 2170004 Project - I 17-05-20188Sem:

064 KJIET, Savali 09 ELECTRICAL ENGINEERING 2180901 Testng and Commissioning of Electrical Equipments

14-05-2018 15-05-2018

064 KJIET, Savali 09 ELECTRICAL ENGINEERING 2180903 Power System Planning and Design 14-05-2018 15-05-2018

064 KJIET, Savali 09 ELECTRICAL ENGINEERING 2180905 Project 16-05-2018 17-05-2018

064 KJIET, Savali 09 ELECTRICAL ENGINEERING 2180911 Power Quality And Management 16-05-2018 17-05-2018

6Sem:

064 KJIET, Savali 16 INFORMATION TECHNOLOGY



2160707 Advanced Java 07-06-2018


2160708 Web Technology 08-06-2018


2160711 .Net Technology 12-06-2018



8Sem:






2181606 Project (Phase-II) 10-05-2018

5Sem:

064 KJIET, Savali 19 MECHANICAL ENGINEERING 2151902 Theory of Machines 07-06-2018

064 KJIET, Savali 19 MECHANICAL ENGINEERING 2151903 Fluid Power Engineering 08-06-2018

064 KJIET, Savali 19 MECHANICAL ENGINEERING 2151907 Design of Machine Elements 07-06-2018

064 KJIET, Savali 19 MECHANICAL ENGINEERING 2151908 Control Engineering 13-06-2018

064 KJIET, Savali 19 MECHANICAL ENGINEERING 2151909 Heat Transfer 07-06-20186Sem:

064 KJIET, Savali 19 MECHANICAL ENGINEERING 2151909 Heat Transfer 07-06-2018

064 KJIET, Savali 19 MECHANICAL ENGINEERING 2161901 Dynamics of Machinery 13-06-2018, 14-06-2018, 15-06-2018

064 KJIET, Savali 19 MECHANICAL ENGINEERING 2161902 Internal Combuston Engines 07-06-2018, 08-06-2018, 09-06-2018

064 KJIET, Savali 19 MECHANICAL ENGINEERING 2161903 Computer Aided Design 07-06-2018

064 KJIET, Savali 19 MECHANICAL ENGINEERING 2161903 Computer Aided Design 07-06-2018, 08-06-2018, 09-06-2018

Page 37 of 57




064 KJIET, Savali 19 MECHANICAL ENGINEERING 2161907 Industrial Engineering 13-06-2018, 14-06-2018, 15-06-2018

064 KJIET, Savali 19 MECHANICAL ENGINEERING 2161908 Refrigeraton and Air Conditoning 07-06-2018, 08-06-2018, 09-06-2018

064 KJIET, Savali 19 MECHANICAL ENGINEERING 2161909 Producton Technology 13-06-2018, 14-06-2018, 15-06-2018

7Sem:

064 KJIET, Savali 19 MECHANICAL ENGINEERING 2171901 Operaton Research 14-05-2018

064 KJIET, Savali 19 MECHANICAL ENGINEERING 2171903 Computer Aided Manufacturing 14-05-2018

064 KJIET, Savali 19 MECHANICAL ENGINEERING 2171909 Machine Design 14-05-2018

064 KJIET, Savali 19 MECHANICAL ENGINEERING 2171910 Power Plant Engineering 18-05-2018

064 KJIET, Savali 19 MECHANICAL ENGINEERING 2171912 Oil Hydraulics & Pneumatcs 14-05-20188Sem:

064 KJIET, Savali 19 MECHANICAL ENGINEERING 2181909 Project – II 14-05-2018

064 KJIET, Savali 19 MECHANICAL ENGINEERING 2181916 Energy Conservaton And Management 18-05-20186Sem:

080 VIE, Kotambi 06 CIVIL ENGINEERING 2160601 Advanced Constructon and Equipments 07-06-2018

080 VIE, Kotambi 06 CIVIL ENGINEERING 2160602 Applied Fluid Mechanics 08-06-2018

080 VIE, Kotambi 06 CIVIL ENGINEERING 2160603 Railway, Bridge & Tunnel Engineering 11-06-2018

080 VIE, Kotambi 06 CIVIL ENGINEERING 2160604 Water & Waste Water Engineering 12-06-2018

080 VIE, Kotambi 06 CIVIL ENGINEERING 2160607 Elementary Structural Design 13-06-2018

080 VIE, Kotambi 06 CIVIL ENGINEERING 2160608 Urban Transportaton system 14-06-20188Sem:

080 VIE, Kotambi 06 CIVIL ENGINEERING 2180605 Project – II 18-05-2018

080 VIE, Kotambi 06 CIVIL ENGINEERING 2180609 Foundaton Engineering 11-05-2018

080 VIE, Kotambi 06 CIVIL ENGINEERING 2180610 Design of Steel Structures 14-05-2018

080 VIE, Kotambi 06 CIVIL ENGINEERING 2180611 Constructon Management 16-05-2018

080 VIE, Kotambi 06 CIVIL ENGINEERING 2180613 Glass Facade Engineering 21-05-20185Sem:

080 VIE, Kotambi 07 COMPUTER ENGINEERING 2150002 Insttute Electve - Cyber Security 07-06-2018

080 VIE, Kotambi 07 COMPUTER ENGINEERING 2150703 Analysis and Design of Algorithms 08-06-2018

080 VIE, Kotambi 07 COMPUTER ENGINEERING 2150708 System Programming 13-06-20186Sem:

080 VIE, Kotambi 07 COMPUTER ENGINEERING 2160701 Sofware Engineering 07-06-2018

080 VIE, Kotambi 07 COMPUTER ENGINEERING 2160707 Advanced Java 11-06-2018

080 VIE, Kotambi 07 COMPUTER ENGINEERING 2160708 Web Technology 12-06-2018

080 VIE, Kotambi 07 COMPUTER ENGINEERING 2160711 .Net Technology 08-06-20188Sem:

080 VIE, Kotambi 07 COMPUTER ENGINEERING 2180703 Artfcial Intelligence 11-05-2018

080 VIE, Kotambi 07 COMPUTER ENGINEERING 2180706 Project (Phase-II) 14-05-2018

080 VIE, Kotambi 07 COMPUTER ENGINEERING 2180710 Big Data Analytcs 15-05-20186Sem:

080 VIE, Kotambi 09 ELECTRICAL ENGINEERING 2160902 Power Electronics – II 7-06-2018, 8-06-2018

080 VIE, Kotambi 09 ELECTRICAL ENGINEERING 2160904 High Voltage Engineering 7-06-2018, 8-06-2018

Page 38 of 57




080 VIE, Kotambi 09 ELECTRICAL ENGINEERING 2160908 Electrical Power system – II 11-06-2018, 12-06-2018

080 VIE, Kotambi 09 ELECTRICAL ENGINEERING 2160911 Computer Aided Analysis and Design for Electrical Engg.

11-06-2018, 12-06-2018

080 VIE, Kotambi 09 ELECTRICAL ENGINEERING 2160912 Design of DC Machines and Transformer 13-06-2018, 14-06-2018

8Sem:

080 VIE, Kotambi 09 ELECTRICAL ENGINEERING 2180901 Testng and Commissioning of Electrical Equipments

14-05-2018 15-05-2018

080 VIE, Kotambi 09 ELECTRICAL ENGINEERING 2180903 Power System Planning and Design 14-05-2018 15-05-2018

080 VIE, Kotambi 09 ELECTRICAL ENGINEERING 2180905 Project 16-05-2018 17-05-2018

080 VIE, Kotambi 09 ELECTRICAL ENGINEERING 2180911 Power Quality And Management 16-05-2018 17-05-2018

8Sem:

080 VIE, Kotambi 11 ELECTRONICS & COMMUNICATION ENGINEERING


080 VIE, Kotambi 11 ELECTRONICS & COMMUNICATION ENGINEERING

2181108 Project II 15-05-2018

6Sem:

080 VIE, Kotambi 16 INFORMATION TECHNOLOGY



2160707 Advanced Java 11-06-2018


2160708 Web Technology 12-06-2018


2160711 .Net Technology 07-06-2018



8Sem:






2181606 Project (Phase-II) 11-05-2018

6Sem:

080 VIE, Kotambi 19 MECHANICAL ENGINEERING 2161901 Dynamics of Machinery 11-06-2018, 12-06-2018, 13-06-2018

080 VIE, Kotambi 19 MECHANICAL ENGINEERING 2161902 Internal Combuston Engines 11-06-2018, 12-06-2018, 13-06-2018

080 VIE, Kotambi 19 MECHANICAL ENGINEERING 2161903 Computer Aided Design 07-06-2018, 08-06-2018, 09-06-2018

080 VIE, Kotambi 19 MECHANICAL ENGINEERING 2161907 Industrial Engineering 07-06-2018

Page 39 of 57




080 VIE, Kotambi 19 MECHANICAL ENGINEERING 2161907 Industrial Engineering 07-06-2018, 08-06-2018, 09-06-2018

080 VIE, Kotambi 19 MECHANICAL ENGINEERING 2161908 Refrigeraton and Air Conditoning 07-06-2018, 08-06-2018, 09-06-2018

080 VIE, Kotambi 19 MECHANICAL ENGINEERING 2161909 Producton Technology 11-06-2018, 12-06-2018, 13-06-2018

7Sem:

080 VIE, Kotambi 19 MECHANICAL ENGINEERING 2151908 Control Engineering 16-05-2018

080 VIE, Kotambi 19 MECHANICAL ENGINEERING 2170001 Project - I 19-05-2018

080 VIE, Kotambi 19 MECHANICAL ENGINEERING 2171909 Machine Design 19-05-20188Sem:

080 VIE, Kotambi 19 MECHANICAL ENGINEERING 2181909 Project – II 18-05-2018, 19-05-2018

080 VIE, Kotambi 19 MECHANICAL ENGINEERING 2181909 Project – II 18-05-2018, 19-05-2018

080 VIE, Kotambi 19 MECHANICAL ENGINEERING 2181915 Automobile Engineering 16-05-2018, 17-05-2018

080 VIE, Kotambi 19 MECHANICAL ENGINEERING 2181915 Automobile Engineering 16-05-2018, 17-05-2018

5Sem:

082 Dr.JIV, Anand 06 CIVIL ENGINEERING 2150601 Highway Engineering 14-06-2018

082 Dr.JIV, Anand 06 CIVIL ENGINEERING 2150602 Hydrology & Water Resources Engineering 12-06-2018

082 Dr.JIV, Anand 06 CIVIL ENGINEERING 2150609 Soil Mechanics 14-06-20186Sem:

082 Dr.JIV, Anand 06 CIVIL ENGINEERING 2160601 Advanced Constructon and Equipments 07-06-2018

082 Dr.JIV, Anand 06 CIVIL ENGINEERING 2160602 Applied Fluid Mechanics 08-06-2018

082 Dr.JIV, Anand 06 CIVIL ENGINEERING 2160603 Railway, Bridge & Tunnel Engineering 11-06-2018

082 Dr.JIV, Anand 06 CIVIL ENGINEERING 2160604 Water & Waste Water Engineering 12-06-2018

082 Dr.JIV, Anand 06 CIVIL ENGINEERING 2160607 Elementary Structural Design 13-06-2018

082 Dr.JIV, Anand 06 CIVIL ENGINEERING 2160608 Urban Transportaton system 14-06-20187Sem:

082 Dr.JIV, Anand 06 CIVIL ENGINEERING 170001 Project - I 18-05-2018

082 Dr.JIV, Anand 06 CIVIL ENGINEERING 2170003 Project - I 18-05-20188Sem:

082 Dr.JIV, Anand 06 CIVIL ENGINEERING 180601 Design Of Hydraulic Structures 19-05-2018

082 Dr.JIV, Anand 06 CIVIL ENGINEERING 180603 Professional Practce & Valuaton 19-05-2018

082 Dr.JIV, Anand 06 CIVIL ENGINEERING 180604 Structural Design-II 18-05-2018

082 Dr.JIV, Anand 06 CIVIL ENGINEERING 180605 Project -II 18-05-2018

082 Dr.JIV, Anand 06 CIVIL ENGINEERING 180606 Irrigaton Water Management 21-05-2018

082 Dr.JIV, Anand 06 CIVIL ENGINEERING 2180605 Project – II 18-05-2018

082 Dr.JIV, Anand 06 CIVIL ENGINEERING 2180607 Repairs & Rehabilitaton Of Concrete Structures 21-05-2018

082 Dr.JIV, Anand 06 CIVIL ENGINEERING 2180609 Foundaton Engineering 10-05-2018

082 Dr.JIV, Anand 06 CIVIL ENGINEERING 2180610 Design of Steel Structures 14-05-2018

082 Dr.JIV, Anand 06 CIVIL ENGINEERING 2180611 Constructon Management 16-05-20185Sem:

Page 40 of 57




082 Dr.JIV, Anand 07 COMPUTER ENGINEERING 2150002 Insttute Electve - Cyber Security 07-06-2018

082 Dr.JIV, Anand 07 COMPUTER ENGINEERING 2150703 Analysis and Design of Algorithms 08-06-2018

082 Dr.JIV, Anand 07 COMPUTER ENGINEERING 2150704 Object Oriented Programming using JAVA 11-06-2018

082 Dr.JIV, Anand 07 COMPUTER ENGINEERING 2150707 Microprocessor and Interfacing 12-06-2018

082 Dr.JIV, Anand 07 COMPUTER ENGINEERING 2150708 System Programming 13-06-20186Sem:

082 Dr.JIV, Anand 07 COMPUTER ENGINEERING 2160701 Sofware Engineering 07-06-2018

082 Dr.JIV, Anand 07 COMPUTER ENGINEERING 2160707 Advanced Java 12-06-2018

082 Dr.JIV, Anand 07 COMPUTER ENGINEERING 2160708 Web Technology 13-06-2018

082 Dr.JIV, Anand 07 COMPUTER ENGINEERING 2160710 Distributed operatng system 11-06-20188Sem:

082 Dr.JIV, Anand 07 COMPUTER ENGINEERING 2180703 Artfcial Intelligence 10-05-2018

082 Dr.JIV, Anand 07 COMPUTER ENGINEERING 2180706 Project (Phase-II) 11-05-2018

082 Dr.JIV, Anand 07 COMPUTER ENGINEERING 2180713 Web Data Management 15-05-20186Sem:

082 Dr.JIV, Anand 09 ELECTRICAL ENGINEERING 2160902 Power Electronics – II 7-06-2018,

082 Dr.JIV, Anand 09 ELECTRICAL ENGINEERING 2160904 High Voltage Engineering 8-06-2018,

082 Dr.JIV, Anand 09 ELECTRICAL ENGINEERING 2160908 Electrical Power system – II 9-06-2018,

082 Dr.JIV, Anand 09 ELECTRICAL ENGINEERING 2160912 Design of DC Machines and Transformer 11-06-2018

082 Dr.JIV, Anand 09 ELECTRICAL ENGINEERING 2160913 Control of Electrical Drives 12-06-2018,

8Sem:

082 Dr.JIV, Anand 09 ELECTRICAL ENGINEERING 2180901 Testng and Commissioning of Electrical Equipments

11-05-2018,12-05-2018

082 Dr.JIV, Anand 09 ELECTRICAL ENGINEERING 2180903 Power System Planning and Design 14-05-2018 15-05-2018

082 Dr.JIV, Anand 09 ELECTRICAL ENGINEERING 2180905 Project 11-05-2018,12-05-2018

082 Dr.JIV, Anand 09 ELECTRICAL ENGINEERING 2180910 Energy Conservaton, And Audit 14-05-2018 15-05-2018

6Sem:

082 Dr.JIV, Anand 11 ELECTRONICS & COMMUNICATION ENGINEERING










8Sem:




2181108 Project II 17-05-2018

5Sem:

082 Dr.JIV, Anand 19 MECHANICAL ENGINEERING 2150002 Insttute Electve - Cyber Security 08-06-2018

082 Dr.JIV, Anand 19 MECHANICAL ENGINEERING 2151902 Theory of Machines 11-06-2018

Page 41 of 57




082 Dr.JIV, Anand 19 MECHANICAL ENGINEERING 2151903 Fluid Power Engineering 08-06-2018

082 Dr.JIV, Anand 19 MECHANICAL ENGINEERING 2151907 Design of Machine Elements 11-06-2018

082 Dr.JIV, Anand 19 MECHANICAL ENGINEERING 2151908 Control Engineering 07-06-2018

082 Dr.JIV, Anand 19 MECHANICAL ENGINEERING 2151909 Heat Transfer 08-06-20186Sem:

082 Dr.JIV, Anand 19 MECHANICAL ENGINEERING 2161901 Dynamics of Machinery 11-06-2018, 12-06-2018

082 Dr.JIV, Anand 19 MECHANICAL ENGINEERING 2161902 Internal Combuston Engines 07-06-2018, 08-06-2018

082 Dr.JIV, Anand 19 MECHANICAL ENGINEERING 2161903 Computer Aided Design 07-06-2018, 08-06-2018

082 Dr.JIV, Anand 19 MECHANICAL ENGINEERING 2161907 Industrial Engineering 14-06-2018, 15-06-2018

082 Dr.JIV, Anand 19 MECHANICAL ENGINEERING 2161908 Refrigeraton and Air Conditoning 11-06-2018, 12-06-2018

082 Dr.JIV, Anand 19 MECHANICAL ENGINEERING 2161909 Producton Technology 14-06-2018, 15-06-2018

7Sem:

082 Dr.JIV, Anand 19 MECHANICAL ENGINEERING 2171903 Computer Aided Manufacturing 14-05-20188Sem:

082 Dr.JIV, Anand 19 MECHANICAL ENGINEERING 2181909 Project – II 14-05-2018

082 Dr.JIV, Anand 19 MECHANICAL ENGINEERING 2181913 Product Design And Value Engineering 10-05-2018, 11-05-2018

6Sem:

082 Dr.JIV, Anand 31 COMPUTER SCIENCE & ENGINEERING



2160707 Advanced Java 12-06-2018


2160708 Web Technology 13-06-2018


2160710 Distributed operatng system 11-06-2018

8Sem:




2180706 Project (Phase-II) 11-05-2018


2180713 Web Data Management 15-05-2018

6Sem:

087 Parul Inst., Limda 02 AUTOMOBILE ENGINEERING 2160207 Alternatve fuel and power systems 09-06-2018

087 Parul Inst., Limda 02 AUTOMOBILE ENGINEERING 2160208 Automotve computer controlled Systems 11-06-2018

087 Parul Inst., Limda 02 AUTOMOBILE ENGINEERING 2161901 Dynamics of Machinery 08-06-2018

087 Parul Inst., Limda 02 AUTOMOBILE ENGINEERING 2161903 Computer Aided Design 14-06-2018

087 Parul Inst., Limda 02 AUTOMOBILE ENGINEERING 2161908 Refrigeraton and Air Conditoning 15-06-20188Sem:

087 Parul Inst., Limda 02 AUTOMOBILE ENGINEERING 2180201 Project – II 11-05-2018, 12-05-2018

087 Parul Inst., Limda 02 AUTOMOBILE ENGINEERING 2180206 Automobile system Design 14-05-2018

087 Parul Inst., Limda 02 AUTOMOBILE ENGINEERING 2180207 Applied Industrial Engineering In Automobile 15-05-2018

Page 42 of 57




087 Parul Inst., Limda 02 AUTOMOBILE ENGINEERING 2180215 Automotve And Combuston Engine Technology 10-05-20186Sem:

087 Parul Inst., Limda 05 CHEMICAL ENGINEERING 2160501 Mass Transfer Operaton - II 11-06-2018

087 Parul Inst., Limda 05 CHEMICAL ENGINEERING 2160503 Process Equipment Design -I 13-06-2018

087 Parul Inst., Limda 05 CHEMICAL ENGINEERING 2160506 Chemical Reacton Engineering - I 14-06-2018

087 Parul Inst., Limda 05 CHEMICAL ENGINEERING 2160508 Biochemical Engineering 09-06-20188Sem:

087 Parul Inst., Limda 05 CHEMICAL ENGINEERING 2180502 Petroleum Refning & Petrochemicals 14-05-2018 , 15-05-2018

087 Parul Inst., Limda 05 CHEMICAL ENGINEERING 2180503 Process Modeling, Simulaton & Optmizaton 19-05-2018 , 21-05-2018

087 Parul Inst., Limda 05 CHEMICAL ENGINEERING 2180504 Project – II 10-05-2018,11-05-2018

087 Parul Inst., Limda 05 CHEMICAL ENGINEERING 2180509 Fertlizer Technology 16-05-2018 , 17-05-2018

6Sem:

087 Parul Inst., Limda 06 CIVIL ENGINEERING 2160601 Advanced Constructon and Equipments 07-06-2018

087 Parul Inst., Limda 06 CIVIL ENGINEERING 2160602 Applied Fluid Mechanics 08-06-2018

087 Parul Inst., Limda 06 CIVIL ENGINEERING 2160603 Railway, Bridge & Tunnel Engineering 11-06-2018

087 Parul Inst., Limda 06 CIVIL ENGINEERING 2160604 Water & Waste Water Engineering 12-06-2018

087 Parul Inst., Limda 06 CIVIL ENGINEERING 2160607 Elementary Structural Design 13-06-2018

087 Parul Inst., Limda 06 CIVIL ENGINEERING 2160608 Urban Transportaton system 14-06-20187Sem:

087 Parul Inst., Limda 06 CIVIL ENGINEERING 2170003 Project - I 18-05-2018

087 Parul Inst., Limda 06 CIVIL ENGINEERING 2170607 Design of Reinforced Concrete Structures 15-05-2018

087 Parul Inst., Limda 06 CIVIL ENGINEERING 2170609 Irrigaton Engineering 18-05-2018

087 Parul Inst., Limda 06 CIVIL ENGINEERING 2170610 Professional Practces & Valuaton 16-05-2018

087 Parul Inst., Limda 06 CIVIL ENGINEERING 2170613 Trafc Engineering 19-05-20188Sem:

087 Parul Inst., Limda 06 CIVIL ENGINEERING 2180602 Harbour & Airport Engineering 19-05-2018

087 Parul Inst., Limda 06 CIVIL ENGINEERING 2180605 Project – II 18-05-2018

087 Parul Inst., Limda 06 CIVIL ENGINEERING 2180607 Repairs & Rehabilitaton Of Concrete Structures 21-05-2018

087 Parul Inst., Limda 06 CIVIL ENGINEERING 2180609 Foundaton Engineering 11-05-2018

087 Parul Inst., Limda 06 CIVIL ENGINEERING 2180610 Design of Steel Structures 14-05-2018

087 Parul Inst., Limda 06 CIVIL ENGINEERING 2180610 Design of Steel Structures 15-05-2018

087 Parul Inst., Limda 06 CIVIL ENGINEERING 2180611 Constructon Management 16-05-20186Sem:

087 Parul Inst., Limda 07 COMPUTER ENGINEERING 2160701 Sofware Engineering 07-06-2018

087 Parul Inst., Limda 07 COMPUTER ENGINEERING 2160707 Advanced Java 11-06-2018

087 Parul Inst., Limda 07 COMPUTER ENGINEERING 2160708 Web Technology 12-06-2018

087 Parul Inst., Limda 07 COMPUTER ENGINEERING 2160711 .Net Technology 08-06-20187Sem:

087 Parul Inst., Limda 07 COMPUTER ENGINEERING 2170701 Compiler Design 11-05-20188Sem:

087 Parul Inst., Limda 07 COMPUTER ENGINEERING 2180703 Artfcial Intelligence 10-05-2018

087 Parul Inst., Limda 07 COMPUTER ENGINEERING 2180706 Project (Phase-II) 11-05-2018

087 Parul Inst., Limda 07 COMPUTER ENGINEERING 2180710 Big Data Analytcs 16-05-2018

087 Parul Inst., Limda 07 COMPUTER ENGINEERING 2180711 Python Programming 16-05-2018

087 Parul Inst., Limda 07 COMPUTER ENGINEERING 2180712 Cloud Infrastructure And Services 16-05-2018

Page 43 of 57




087 Parul Inst., Limda 07 COMPUTER ENGINEERING 2180714 Ios Programming 16-05-2018

087 Parul Inst., Limda 07 COMPUTER ENGINEERING 2180715 Android Programming 16-05-20185Sem:

087 Parul Inst., Limda 09 ELECTRICAL ENGINEERING 2150002 Insttute Electve - Cyber Security 09-06-2018

087 Parul Inst., Limda 09 ELECTRICAL ENGINEERING 2150903 Power Electronics – I 14-06-20186Sem:

087 Parul Inst., Limda 09 ELECTRICAL ENGINEERING 2160902 Power Electronics – II 14-06-2018

087 Parul Inst., Limda 09 ELECTRICAL ENGINEERING 2160904 High Voltage Engineering 11-06-2018

087 Parul Inst., Limda 09 ELECTRICAL ENGINEERING 2160908 Electrical Power system – II 12-06-2018

087 Parul Inst., Limda 09 ELECTRICAL ENGINEERING 2160912 Design of DC Machines and Transformer 15-06-2018

087 Parul Inst., Limda 09 ELECTRICAL ENGINEERING 2160913 Control of Electrical Drives 13-06-20187Sem:

087 Parul Inst., Limda 09 ELECTRICAL ENGINEERING 2170908 Switch Gear and Protecton 16-05-20188Sem:

087 Parul Inst., Limda 09 ELECTRICAL ENGINEERING 2180901 Testng and Commissioning of Electrical Equipments

14-05-2018 15-05-2018 16-05-2018

087 Parul Inst., Limda 09 ELECTRICAL ENGINEERING 2180903 Power System Planning and Design 14-05-2018 15-05-2018 16-05-2018

087 Parul Inst., Limda 09 ELECTRICAL ENGINEERING 2180905 Project 17-05-2018 18-05-2018 19-05-2018

087 Parul Inst., Limda 09 ELECTRICAL ENGINEERING 2180910 Energy Conservaton, And Audit 14-05-2018 15-05-2018 16-05-2018

6Sem:

087 Parul Inst., Limda 11 ELECTRONICS & COMMUNICATION ENGINEERING










07-06-2018

8Sem:




2181108 Project II 18-05-2018

5Sem:

087 Parul Inst., Limda 19 MECHANICAL ENGINEERING 2151902 Theory of Machines 12-06-2018

087 Parul Inst., Limda 19 MECHANICAL ENGINEERING 2151903 Fluid Power Engineering 08-06-2018

087 Parul Inst., Limda 19 MECHANICAL ENGINEERING 2151907 Design of Machine Elements 13-06-2018

087 Parul Inst., Limda 19 MECHANICAL ENGINEERING 2151908 Control Engineering 07-06-2018

087 Parul Inst., Limda 19 MECHANICAL ENGINEERING 2151909 Heat Transfer 08-06-20186Sem:

087 Parul Inst., Limda 19 MECHANICAL ENGINEERING 2161901 Dynamics of Machinery 13-06-2018

087 Parul Inst., Limda 19 MECHANICAL ENGINEERING 2161902 Internal Combuston Engines 09-06-2018

Page 44 of 57




087 Parul Inst., Limda 19 MECHANICAL ENGINEERING 2161903 Computer Aided Design 14-06-2018

087 Parul Inst., Limda 19 MECHANICAL ENGINEERING 2161907 Industrial Engineering 07-06-2018

087 Parul Inst., Limda 19 MECHANICAL ENGINEERING 2161908 Refrigeraton and Air Conditoning 08-06-2018

087 Parul Inst., Limda 19 MECHANICAL ENGINEERING 2161909 Producton Technology 12-06-20188Sem:

087 Parul Inst., Limda 19 MECHANICAL ENGINEERING 2161908 Refrigeraton and Air Conditoning 17-05-2018

087 Parul Inst., Limda 19 MECHANICAL ENGINEERING 2161909 Producton Technology 17-05-2018

087 Parul Inst., Limda 19 MECHANICAL ENGINEERING 2181909 Project – II 17-05-2018, 18-05-2018, 19-05-2018



087 Parul Inst., Limda 19 MECHANICAL ENGINEERING 2181920 Quality Engineering 19-05-2018

087 Parul Inst., Limda 19 MECHANICAL ENGINEERING 2181923 Entrepreneurship 15-05-2018, 16-05-2018



6Sem:

087 Parul Inst., Limda 31 COMPUTER SCIENCE & ENGINEERING



2160707 Advanced Java 11-06-2018


2160708 Web Technology 12-06-2018


2160711 .Net Technology 08-06-2018

8Sem:




2180706 Project (Phase-II) 11-05-2018



5Sem:

095 ITM,VADODARA 02 AUTOMOBILE ENGINEERING 2150206 Automotve manufacturing 12-06-20186Sem:

095 ITM,VADODARA 02 AUTOMOBILE ENGINEERING 2160207 Alternatve fuel and power systems 07-06-2018

095 ITM,VADODARA 02 AUTOMOBILE ENGINEERING 2160208 Automotve computer controlled Systems 12-06-2018

095 ITM,VADODARA 02 AUTOMOBILE ENGINEERING 2161901 Dynamics of Machinery 11-06-2018

095 ITM,VADODARA 02 AUTOMOBILE ENGINEERING 2161903 Computer Aided Design 08-06-2018

095 ITM,VADODARA 02 AUTOMOBILE ENGINEERING 2161908 Refrigeraton and Air Conditoning 09-06-20188Sem:

095 ITM,VADODARA 02 AUTOMOBILE ENGINEERING 2180201 Project – II 15-05-2018

095 ITM,VADODARA 02 AUTOMOBILE ENGINEERING 2180206 Automobile system Design 11-05-2018

Page 45 of 57




095 ITM,VADODARA 02 AUTOMOBILE ENGINEERING 2180207 Applied Industrial Engineering In Automobile 12-05-2018

095 ITM,VADODARA 02 AUTOMOBILE ENGINEERING 2180215 Automotve And Combuston Engine Technology 10-05-20186Sem:

095 ITM,VADODARA 06 CIVIL ENGINEERING 2160601 Advanced Constructon and Equipments 07-06-2018

095 ITM,VADODARA 06 CIVIL ENGINEERING 2160602 Applied Fluid Mechanics 08-06-2018

095 ITM,VADODARA 06 CIVIL ENGINEERING 2160603 Railway, Bridge & Tunnel Engineering 11-06-2018

095 ITM,VADODARA 06 CIVIL ENGINEERING 2160604 Water & Waste Water Engineering 12-06-2018

095 ITM,VADODARA 06 CIVIL ENGINEERING 2160607 Elementary Structural Design 13-06-2018

095 ITM,VADODARA 06 CIVIL ENGINEERING 2160608 Urban Transportaton system 14-06-2018

095 ITM,VADODARA 06 CIVIL ENGINEERING 2160609 Computatonal Mechanics 14-06-20188Sem:

095 ITM,VADODARA 06 CIVIL ENGINEERING 2180605 Project – II 18-05-2018

095 ITM,VADODARA 06 CIVIL ENGINEERING 2180607 Repairs & Rehabilitaton Of Concrete Structures 21-05-2018

095 ITM,VADODARA 06 CIVIL ENGINEERING 2180609 Foundaton Engineering 10-05-2018

095 ITM,VADODARA 06 CIVIL ENGINEERING 2180609 Foundaton Engineering 11-05-2018

095 ITM,VADODARA 06 CIVIL ENGINEERING 2180610 Design of Steel Structures 14-05-2018

095 ITM,VADODARA 06 CIVIL ENGINEERING 2180610 Design of Steel Structures 15-05-2018

095 ITM,VADODARA 06 CIVIL ENGINEERING 2180611 Constructon Management 16-05-20185Sem:

095 ITM,VADODARA 07 COMPUTER ENGINEERING 2150002 Insttute Electve - Cyber Security 07-06-2018

095 ITM,VADODARA 07 COMPUTER ENGINEERING 2150703 Analysis and Design of Algorithms 08-06-2018

095 ITM,VADODARA 07 COMPUTER ENGINEERING 2150704 Object Oriented Programming using JAVA 11-06-2018

095 ITM,VADODARA 07 COMPUTER ENGINEERING 2150707 Microprocessor and Interfacing 12-06-2018

095 ITM,VADODARA 07 COMPUTER ENGINEERING 2150708 System Programming 13-06-20186Sem:

095 ITM,VADODARA 07 COMPUTER ENGINEERING 2160701 Sofware Engineering 07-06-2018

095 ITM,VADODARA 07 COMPUTER ENGINEERING 2160707 Advanced Java 11-06-2018

095 ITM,VADODARA 07 COMPUTER ENGINEERING 2160708 Web Technology 12-06-2018

095 ITM,VADODARA 07 COMPUTER ENGINEERING 2160711 .Net Technology 08-06-20188Sem:

095 ITM,VADODARA 07 COMPUTER ENGINEERING 2180703 Artfcial Intelligence 10-05-2018

095 ITM,VADODARA 07 COMPUTER ENGINEERING 2180706 Project (Phase-II) 11-05-2018

095 ITM,VADODARA 07 COMPUTER ENGINEERING 2180710 Big Data Analytcs 14-05-2018

095 ITM,VADODARA 07 COMPUTER ENGINEERING 2180710 Big Data Analytcs 15-05-2018

095 ITM,VADODARA 07 COMPUTER ENGINEERING 2180711 Python Programming 14-05-2018

095 ITM,VADODARA 07 COMPUTER ENGINEERING 2180713 Web Data Management 15-05-20186Sem:

095 ITM,VADODARA 09 ELECTRICAL ENGINEERING 2160902 Power Electronics – II 7-06-2018,

095 ITM,VADODARA 09 ELECTRICAL ENGINEERING 2160904 High Voltage Engineering 8-06-2018,

095 ITM,VADODARA 09 ELECTRICAL ENGINEERING 2160908 Electrical Power system – II 9-06-2018,

095 ITM,VADODARA 09 ELECTRICAL ENGINEERING 2160911 Computer Aided Analysis and Design for Electrical Engg.

11-06-2018

095 ITM,VADODARA 09 ELECTRICAL ENGINEERING 2160912 Design of DC Machines and Transformer 12-06-2018,

095 ITM,VADODARA 09 ELECTRICAL ENGINEERING 2160913 Control of Electrical Drives 11-06-20188Sem:

095 ITM,VADODARA 09 ELECTRICAL ENGINEERING 2180901 Testng and Commissioning of Electrical Equipments

17-05-2018 18-05-2018

095 ITM,VADODARA 09 ELECTRICAL ENGINEERING 2180903 Power System Planning and Design 19-05-2018 21-05-2018

095 ITM,VADODARA 09 ELECTRICAL ENGINEERING 2180905 Project 19-05-2018 21-05-2018

Page 46 of 57




095 ITM,VADODARA 09 ELECTRICAL ENGINEERING 2180910 Energy Conservaton, And Audit 17-05-2018 18-05-2018

6Sem:

095 ITM,VADODARA 11 ELECTRONICS & COMMUNICATION ENGINEERING










8Sem:




2181108 Project II 14-05-2018

5Sem:

095 ITM,VADODARA 19 MECHANICAL ENGINEERING 2150002 Insttute Electve - Cyber Security 09-06-2018

095 ITM,VADODARA 19 MECHANICAL ENGINEERING 2151902 Theory of Machines 07-06-2018

095 ITM,VADODARA 19 MECHANICAL ENGINEERING 2151903 Fluid Power Engineering 11-06-2018

095 ITM,VADODARA 19 MECHANICAL ENGINEERING 2151907 Design of Machine Elements 11-06-2018

095 ITM,VADODARA 19 MECHANICAL ENGINEERING 2151908 Control Engineering 07-06-2018

095 ITM,VADODARA 19 MECHANICAL ENGINEERING 2151909 Heat Transfer 11-06-20186Sem:

095 ITM,VADODARA 19 MECHANICAL ENGINEERING 2161901 Dynamics of Machinery 07-06-2018, 08-06-2018

095 ITM,VADODARA 19 MECHANICAL ENGINEERING 2161901 Dynamics of Machinery 07-06-2018, 08-06-2018

095 ITM,VADODARA 19 MECHANICAL ENGINEERING 2161902 Internal Combuston Engines 07-06-2018, 08-06-2018

095 ITM,VADODARA 19 MECHANICAL ENGINEERING 2161902 Internal Combuston Engines 07-06-2018, 08-06-2018

095 ITM,VADODARA 19 MECHANICAL ENGINEERING 2161903 Computer Aided Design 13-06-2018, 14-06-2018

095 ITM,VADODARA 19 MECHANICAL ENGINEERING 2161903 Computer Aided Design 13-06-2018, 14-06-2018

095 ITM,VADODARA 19 MECHANICAL ENGINEERING 2161907 Industrial Engineering 13-06-2018

095 ITM,VADODARA 19 MECHANICAL ENGINEERING 2161907 Industrial Engineering 13-06-2018, 14-06-2018

095 ITM,VADODARA 19 MECHANICAL ENGINEERING 2161908 Refrigeraton and Air Conditoning 11-06-2018, 12-06-2018

095 ITM,VADODARA 19 MECHANICAL ENGINEERING 2161908 Refrigeraton and Air Conditoning 11-06-2018, 12-06-2018

Page 47 of 57




095 ITM,VADODARA 19 MECHANICAL ENGINEERING 2161909 Producton Technology 11-06-2018, 12-06-2018

095 ITM,VADODARA 19 MECHANICAL ENGINEERING 2161909 Producton Technology 11-06-2018, 12-06-2018

8Sem:

095 ITM,VADODARA 19 MECHANICAL ENGINEERING 2181909 Project – II 17-05-2018, 18-05-2018

095 ITM,VADODARA 19 MECHANICAL ENGINEERING 2181909 Project – II 17-05-2018, 18-05-2018, 19-05-2018

095 ITM,VADODARA 19 MECHANICAL ENGINEERING 2181923 Entrepreneurship 16-05-20188Sem:

095 ITM,VADODARA 31 COMPUTER SCIENCE & ENGINEERING



2180706 Project (Phase-II) 11-05-2018





5Sem:

100 Sigma,Matar 06 CIVIL ENGINEERING 2150601 Highway Engineering 14-06-2018

100 Sigma,Matar 06 CIVIL ENGINEERING 2150602 Hydrology & Water Resources Engineering 12-06-2018

100 Sigma,Matar 06 CIVIL ENGINEERING 2150603 Environmental Engineering 12-06-2018

100 Sigma,Matar 06 CIVIL ENGINEERING 2150608 Structural Analysis-II 13-06-2018

100 Sigma,Matar 06 CIVIL ENGINEERING 2150609 Soil Mechanics 11-06-20186Sem:

100 Sigma,Matar 06 CIVIL ENGINEERING 2160601 Advanced Constructon and Equipments 07-06-2018

100 Sigma,Matar 06 CIVIL ENGINEERING 2160602 Applied Fluid Mechanics 08-06-2018

100 Sigma,Matar 06 CIVIL ENGINEERING 2160603 Railway, Bridge & Tunnel Engineering 11-06-2018

100 Sigma,Matar 06 CIVIL ENGINEERING 2160604 Water & Waste Water Engineering 12-06-2018

100 Sigma,Matar 06 CIVIL ENGINEERING 2160607 Elementary Structural Design 13-06-2018

100 Sigma,Matar 06 CIVIL ENGINEERING 2160608 Urban Transportaton system 14-06-20187Sem:

100 Sigma,Matar 06 CIVIL ENGINEERING 2170610 Professional Practces & Valuaton 16-05-20188Sem:

100 Sigma,Matar 06 CIVIL ENGINEERING 2180605 Project – II 18-05-2018

100 Sigma,Matar 06 CIVIL ENGINEERING 2180607 Repairs & Rehabilitaton Of Concrete Structures 21-05-2018

100 Sigma,Matar 06 CIVIL ENGINEERING 2180609 Foundaton Engineering 11-05-2018

100 Sigma,Matar 06 CIVIL ENGINEERING 2180610 Design of Steel Structures 15-05-2018

100 Sigma,Matar 06 CIVIL ENGINEERING 2180611 Constructon Management 16-05-20185Sem:

100 Sigma,Matar 07 COMPUTER ENGINEERING 2150704 Object Oriented Programming using JAVA 11-06-20186Sem:

100 Sigma,Matar 07 COMPUTER ENGINEERING 2160701 Sofware Engineering 07-06-2018

100 Sigma,Matar 07 COMPUTER ENGINEERING 2160707 Advanced Java 11-06-2018

100 Sigma,Matar 07 COMPUTER ENGINEERING 2160708 Web Technology 12-06-2018

100 Sigma,Matar 07 COMPUTER ENGINEERING 2160710 Distributed operatng system 08-06-20188Sem:

100 Sigma,Matar 07 COMPUTER ENGINEERING 2180703 Artfcial Intelligence 10-05-2018

100 Sigma,Matar 07 COMPUTER ENGINEERING 2180706 Project (Phase-II) 11-05-2018

Page 48 of 57




100 Sigma,Matar 07 COMPUTER ENGINEERING 2180713 Web Data Management 15-05-20186Sem:

100 Sigma,Matar 09 ELECTRICAL ENGINEERING 2160902 Power Electronics – II 7-06-2018,

100 Sigma,Matar 09 ELECTRICAL ENGINEERING 2160904 High Voltage Engineering 8-06-2018,

100 Sigma,Matar 09 ELECTRICAL ENGINEERING 2160908 Electrical Power system – II 9-06-2018,

100 Sigma,Matar 09 ELECTRICAL ENGINEERING 2160911 Computer Aided Analysis and Design for Electrical Engg.

11-06-2018

100 Sigma,Matar 09 ELECTRICAL ENGINEERING 2160912 Design of DC Machines and Transformer 12-06-2018,

7Sem:

100 Sigma,Matar 09 ELECTRICAL ENGINEERING 2170004 Project - I 18-05-2018

100 Sigma,Matar 09 ELECTRICAL ENGINEERING 2170901 Inter Connected Power System 16-05-2018

100 Sigma,Matar 09 ELECTRICAL ENGINEERING 2170908 Switch Gear and Protecton 17-05-2018

100 Sigma,Matar 09 ELECTRICAL ENGINEERING 2170909 Design of AC Machines 18-05-2018

100 Sigma,Matar 09 ELECTRICAL ENGINEERING 2170913 Industrial Instrumentaton 19-05-20188Sem:

100 Sigma,Matar 09 ELECTRICAL ENGINEERING 2180901 Testng and Commissioning of Electrical Equipments

16-05-2018

100 Sigma,Matar 09 ELECTRICAL ENGINEERING 2180903 Power System Planning and Design 17-05-2018

100 Sigma,Matar 09 ELECTRICAL ENGINEERING 2180905 Project 18-05-2018

100 Sigma,Matar 09 ELECTRICAL ENGINEERING 2180910 Energy Conservaton, And Audit 19-05-20185Sem:

100 Sigma,Matar 19 MECHANICAL ENGINEERING 2151908 Control Engineering 13-06-20186Sem:

100 Sigma,Matar 19 MECHANICAL ENGINEERING 2161901 Dynamics of Machinery 12-06-2018

100 Sigma,Matar 19 MECHANICAL ENGINEERING 2161902 Internal Combuston Engines 14-06-2018

100 Sigma,Matar 19 MECHANICAL ENGINEERING 2161903 Computer Aided Design 09-06-2018

100 Sigma,Matar 19 MECHANICAL ENGINEERING 2161907 Industrial Engineering 15-06-2018

100 Sigma,Matar 19 MECHANICAL ENGINEERING 2161908 Refrigeraton and Air Conditoning 08-06-2018

100 Sigma,Matar 19 MECHANICAL ENGINEERING 2161909 Producton Technology 13-06-20187Sem:

100 Sigma,Matar 19 MECHANICAL ENGINEERING 2170001 Project - I 17-05-2018

100 Sigma,Matar 19 MECHANICAL ENGINEERING 2171901 Operaton Research 15-05-2018

100 Sigma,Matar 19 MECHANICAL ENGINEERING 2171903 Computer Aided Manufacturing 16-05-2018

100 Sigma,Matar 19 MECHANICAL ENGINEERING 2171909 Machine Design 16-05-2018

100 Sigma,Matar 19 MECHANICAL ENGINEERING 2171910 Power Plant Engineering 17-05-2018

100 Sigma,Matar 19 MECHANICAL ENGINEERING 2171912 Oil Hydraulics & Pneumatcs 18-05-20188Sem:

100 Sigma,Matar 19 MECHANICAL ENGINEERING 2181909 Project – II 17-05-2018, 18-05-2018

100 Sigma,Matar 19 MECHANICAL ENGINEERING 2181915 Automobile Engineering 15-05-2018, 16-05-2018

6Sem:

101 IIET DHARMAJ,ANAND 02 AUTOMOBILE ENGINEERING 2160207 Alternatve fuel and power systems 08-06-2018

101 IIET DHARMAJ,ANAND 02 AUTOMOBILE ENGINEERING 2160208 Automotve computer controlled Systems 12-06-2018

101 IIET DHARMAJ,ANAND 02 AUTOMOBILE ENGINEERING 2161901 Dynamics of Machinery 09-06-2018

101 IIET DHARMAJ,ANAND 02 AUTOMOBILE ENGINEERING 2161903 Computer Aided Design 11-06-2018

101 IIET DHARMAJ,ANAND 02 AUTOMOBILE ENGINEERING 2161908 Refrigeraton and Air Conditoning 07-06-20187Sem:

101 IIET DHARMAJ,ANAND 02 AUTOMOBILE ENGINEERING 2170001 Project - I 14-05-2018

101 IIET DHARMAJ,ANAND 02 AUTOMOBILE ENGINEERING 2170202 Automobile Component Design 12-05-2018

Page 49 of 57




101 IIET DHARMAJ,ANAND 02 AUTOMOBILE ENGINEERING 2170203 Vehicle Dynamics 11-05-2018

101 IIET DHARMAJ,ANAND 02 AUTOMOBILE ENGINEERING 2170204 Vehicle Testng &Homologaton 11-05-2018

101 IIET DHARMAJ,ANAND 02 AUTOMOBILE ENGINEERING 2171912 Oil Hydraulics & Pneumatcs 12-05-20188Sem:

101 IIET DHARMAJ,ANAND 02 AUTOMOBILE ENGINEERING 2180201 Project – II 14-05-2018

101 IIET DHARMAJ,ANAND 02 AUTOMOBILE ENGINEERING 2180206 Automobile system Design 12-05-2018

101 IIET DHARMAJ,ANAND 02 AUTOMOBILE ENGINEERING 2180208 Computer Integrated Manufacturing In Automobile Industry

11-05-2018

101 IIET DHARMAJ,ANAND 02 AUTOMOBILE ENGINEERING 2180215 Automotve And Combuston Engine Technology 15-05-20185Sem:

101 IIET DHARMAJ,ANAND 06 CIVIL ENGINEERING 2150608 Structural Analysis-II 13-06-20186Sem:

101 IIET DHARMAJ,ANAND 06 CIVIL ENGINEERING 2160601 Advanced Constructon and Equipments 07-06-2018

101 IIET DHARMAJ,ANAND 06 CIVIL ENGINEERING 2160602 Applied Fluid Mechanics 08-06-2018

101 IIET DHARMAJ,ANAND 06 CIVIL ENGINEERING 2160603 Railway, Bridge & Tunnel Engineering 11-06-2018

101 IIET DHARMAJ,ANAND 06 CIVIL ENGINEERING 2160604 Water & Waste Water Engineering 12-06-2018

101 IIET DHARMAJ,ANAND 06 CIVIL ENGINEERING 2160607 Elementary Structural Design 13-06-2018

101 IIET DHARMAJ,ANAND 06 CIVIL ENGINEERING 2160608 Urban Transportaton system 14-06-20188Sem:

101 IIET DHARMAJ,ANAND 06 CIVIL ENGINEERING 2180602 Harbour & Airport Engineering 19-05-2018

101 IIET DHARMAJ,ANAND 06 CIVIL ENGINEERING 2180605 Project – II 18-05-2018

101 IIET DHARMAJ,ANAND 06 CIVIL ENGINEERING 2180609 Foundaton Engineering 10-05-2018

101 IIET DHARMAJ,ANAND 06 CIVIL ENGINEERING 2180610 Design of Steel Structures 14-05-2018

101 IIET DHARMAJ,ANAND 06 CIVIL ENGINEERING 2180611 Constructon Management 16-05-20185Sem:

101 IIET DHARMAJ,ANAND 07 COMPUTER ENGINEERING 2150002 Insttute Electve - Cyber Security 07-06-2018

101 IIET DHARMAJ,ANAND 07 COMPUTER ENGINEERING 2150703 Analysis and Design of Algorithms 08-06-20186Sem:

101 IIET DHARMAJ,ANAND 07 COMPUTER ENGINEERING 2160701 Sofware Engineering 07-06-2018

101 IIET DHARMAJ,ANAND 07 COMPUTER ENGINEERING 2160707 Advanced Java 11-06-2018

101 IIET DHARMAJ,ANAND 07 COMPUTER ENGINEERING 2160708 Web Technology 12-06-2018

101 IIET DHARMAJ,ANAND 07 COMPUTER ENGINEERING 2160711 .Net Technology 08-06-20187Sem:

101 IIET DHARMAJ,ANAND 07 COMPUTER ENGINEERING 2170709 Informaton and Network Security 14-05-20188Sem:

101 IIET DHARMAJ,ANAND 07 COMPUTER ENGINEERING 2180703 Artfcial Intelligence 10-05-2018

101 IIET DHARMAJ,ANAND 07 COMPUTER ENGINEERING 2180706 Project (Phase-II) 11-05-2018

101 IIET DHARMAJ,ANAND 07 COMPUTER ENGINEERING 2180715 Android Programming 15-05-20186Sem:

101 IIET DHARMAJ,ANAND 08 ELECTRICAL & ELECTRONICS ENGINEERING

2160807 Digital Control System 7-06-2018,


2160902 Power Electronics – II 8-06-2018,


2160908 Electrical Power system – II 9-06-2018,


2160912 Design of DC Machines and Transformer 11-06-2018


2160913 Control of Electrical Drives 12-06-2018,

7Sem:


2160807 Digital Control System 15-05-2018


2170808 Sensor Networks & Instrumentaton 14-05-2018

Page 50 of 57





2170911 Energy Conservaton and Audit 19-05-2018



8Sem:


2180806 Project 18-05-2018


2180807 Industrial Automaton 14-05-2018


2180901 Testng and Commissioning of Electrical Equipments

16-05-2018


2180912 Conditon Monitoring 15-05-2018


2180913 Advanced Control Systems 15-05-2018

6Sem:

101 IIET DHARMAJ,ANAND 09 ELECTRICAL ENGINEERING 2160902 Power Electronics – II 8-06-2018,

101 IIET DHARMAJ,ANAND 09 ELECTRICAL ENGINEERING 2160904 High Voltage Engineering 7-06-2018,

101 IIET DHARMAJ,ANAND 09 ELECTRICAL ENGINEERING 2160908 Electrical Power system – II 9-06-2018,

101 IIET DHARMAJ,ANAND 09 ELECTRICAL ENGINEERING 2160912 Design of DC Machines and Transformer 11-06-2018

101 IIET DHARMAJ,ANAND 09 ELECTRICAL ENGINEERING 2160913 Control of Electrical Drives 12-06-2018,

8Sem:

101 IIET DHARMAJ,ANAND 09 ELECTRICAL ENGINEERING 2180901 Testng and Commissioning of Electrical Equipments

16-05-2018

101 IIET DHARMAJ,ANAND 09 ELECTRICAL ENGINEERING 2180903 Power System Planning and Design 17-05-2018

101 IIET DHARMAJ,ANAND 09 ELECTRICAL ENGINEERING 2180905 Project 18-05-2018

101 IIET DHARMAJ,ANAND 09 ELECTRICAL ENGINEERING 2180910 Energy Conservaton, And Audit 19-05-20186Sem:

101 IIET DHARMAJ,ANAND 11 ELECTRONICS & COMMUNICATION ENGINEERING










08-06-2018

5Sem:

101 IIET DHARMAJ,ANAND 19 MECHANICAL ENGINEERING 2151907 Design of Machine Elements 13-06-2018

101 IIET DHARMAJ,ANAND 19 MECHANICAL ENGINEERING 2151908 Control Engineering 11-06-2018

101 IIET DHARMAJ,ANAND 19 MECHANICAL ENGINEERING 2151909 Heat Transfer 07-06-20186Sem:

101 IIET DHARMAJ,ANAND 19 MECHANICAL ENGINEERING 2161901 Dynamics of Machinery 13-06-2018

101 IIET DHARMAJ,ANAND 19 MECHANICAL ENGINEERING 2161901 Dynamics of Machinery 13-06-2018, 14-06-2018

101 IIET DHARMAJ,ANAND 19 MECHANICAL ENGINEERING 2161902 Internal Combuston Engines 13-06-2018, 14-06-2018

101 IIET DHARMAJ,ANAND 19 MECHANICAL ENGINEERING 2161903 Computer Aided Design 11-06-2018, 12-06-2018

Page 51 of 57




101 IIET DHARMAJ,ANAND 19 MECHANICAL ENGINEERING 2161907 Industrial Engineering 07-06-2018, 08-06-2018

101 IIET DHARMAJ,ANAND 19 MECHANICAL ENGINEERING 2161908 Refrigeraton and Air Conditoning 11-06-2018, 12-06-2018

101 IIET DHARMAJ,ANAND 19 MECHANICAL ENGINEERING 2161909 Producton Technology 07-06-2018, 08-06-2018

8Sem:

101 IIET DHARMAJ,ANAND 19 MECHANICAL ENGINEERING 2181909 Project – II 17-05-2018, 18-05-2018

101 IIET DHARMAJ,ANAND 19 MECHANICAL ENGINEERING 2181920 Quality Engineering 10-05-2018, 11-05-2018

5Sem:

103 OIT,PANCHMAHAL 06 CIVIL ENGINEERING 2150601 Highway Engineering 14-06-2018

103 OIT,PANCHMAHAL 06 CIVIL ENGINEERING 2150602 Hydrology & Water Resources Engineering 12-06-2018

103 OIT,PANCHMAHAL 06 CIVIL ENGINEERING 2150603 Environmental Engineering 12-06-2018

103 OIT,PANCHMAHAL 06 CIVIL ENGINEERING 2150608 Structural Analysis-II 13-06-2018

103 OIT,PANCHMAHAL 06 CIVIL ENGINEERING 2150609 Soil Mechanics 11-06-20186Sem:

103 OIT,PANCHMAHAL 06 CIVIL ENGINEERING 2160601 Advanced Constructon and Equipments 07-06-2018

103 OIT,PANCHMAHAL 06 CIVIL ENGINEERING 2160602 Applied Fluid Mechanics 08-06-2018

103 OIT,PANCHMAHAL 06 CIVIL ENGINEERING 2160603 Railway, Bridge & Tunnel Engineering 11-06-2018

103 OIT,PANCHMAHAL 06 CIVIL ENGINEERING 2160604 Water & Waste Water Engineering 12-06-2018

103 OIT,PANCHMAHAL 06 CIVIL ENGINEERING 2160607 Elementary Structural Design 13-06-2018

103 OIT,PANCHMAHAL 06 CIVIL ENGINEERING 2160608 Urban Transportaton system 14-06-20188Sem:

103 OIT,PANCHMAHAL 06 CIVIL ENGINEERING 2180601 Design Of Hydraulic Structures 19-05-2018

103 OIT,PANCHMAHAL 06 CIVIL ENGINEERING 2180605 Project – II 18-05-2018

103 OIT,PANCHMAHAL 06 CIVIL ENGINEERING 2180609 Foundaton Engineering 11-05-2018

103 OIT,PANCHMAHAL 06 CIVIL ENGINEERING 2180610 Design of Steel Structures 15-05-2018

103 OIT,PANCHMAHAL 06 CIVIL ENGINEERING 2180611 Constructon Management 16-05-20185Sem:

103 OIT,PANCHMAHAL 07 COMPUTER ENGINEERING 2150002 Insttute Electve - Cyber Security 07-06-2018

103 OIT,PANCHMAHAL 07 COMPUTER ENGINEERING 2150703 Analysis and Design of Algorithms 08-06-20186Sem:

103 OIT,PANCHMAHAL 07 COMPUTER ENGINEERING 2160701 Sofware Engineering 07-06-2018

103 OIT,PANCHMAHAL 07 COMPUTER ENGINEERING 2160703 Computer Graphics 08-06-2018

103 OIT,PANCHMAHAL 07 COMPUTER ENGINEERING 2160707 Advanced Java 11-06-2018

103 OIT,PANCHMAHAL 07 COMPUTER ENGINEERING 2160708 Web Technology 12-06-20188Sem:

103 OIT,PANCHMAHAL 07 COMPUTER ENGINEERING 2180703 Artfcial Intelligence 10-05-2018

103 OIT,PANCHMAHAL 07 COMPUTER ENGINEERING 2180706 Project (Phase-II) 11-05-2018

103 OIT,PANCHMAHAL 07 COMPUTER ENGINEERING 2180713 Web Data Management 15-05-20185Sem:

103 OIT,PANCHMAHAL 09 ELECTRICAL ENGINEERING 2150904 Elements of Electrical Design 07-06-2018

103 OIT,PANCHMAHAL 09 ELECTRICAL ENGINEERING 2150907 Microprocessor and Microcontroller Architecture & Interfacing

08-06-2018

6Sem:

103 OIT,PANCHMAHAL 09 ELECTRICAL ENGINEERING 2160902 Power Electronics – II 7-06-2018,

103 OIT,PANCHMAHAL 09 ELECTRICAL ENGINEERING 2160904 High Voltage Engineering 8-06-2018,

103 OIT,PANCHMAHAL 09 ELECTRICAL ENGINEERING 2160908 Electrical Power system – II 9-06-2018,

Page 52 of 57




103 OIT,PANCHMAHAL 09 ELECTRICAL ENGINEERING 2160912 Design of DC Machines and Transformer 11-06-2018

103 OIT,PANCHMAHAL 09 ELECTRICAL ENGINEERING 2160913 Control of Electrical Drives 12-06-2018,

8Sem:

103 OIT,PANCHMAHAL 09 ELECTRICAL ENGINEERING 2180901 Testng and Commissioning of Electrical Equipments

16-05-2018

103 OIT,PANCHMAHAL 09 ELECTRICAL ENGINEERING 2180903 Power System Planning and Design 17-05-2018

103 OIT,PANCHMAHAL 09 ELECTRICAL ENGINEERING 2180905 Project 18-05-2018

103 OIT,PANCHMAHAL 09 ELECTRICAL ENGINEERING 2180911 Power Quality And Management 19-05-20186Sem:

103 OIT,PANCHMAHAL 11 ELECTRONICS & COMMUNICATION ENGINEERING










13-06-2018

7Sem:



8Sem:




2181108 Project II 19-05-2018

6Sem:

103 OIT,PANCHMAHAL 19 MECHANICAL ENGINEERING 2161901 Dynamics of Machinery 14-06-2018

103 OIT,PANCHMAHAL 19 MECHANICAL ENGINEERING 2161902 Internal Combuston Engines 12-06-2018

103 OIT,PANCHMAHAL 19 MECHANICAL ENGINEERING 2161903 Computer Aided Design 13-06-2018

103 OIT,PANCHMAHAL 19 MECHANICAL ENGINEERING 2161907 Industrial Engineering 11-06-2018

103 OIT,PANCHMAHAL 19 MECHANICAL ENGINEERING 2161908 Refrigeraton and Air Conditoning 07-06-2018

103 OIT,PANCHMAHAL 19 MECHANICAL ENGINEERING 2161909 Producton Technology 08-06-20188Sem:

103 OIT,PANCHMAHAL 19 MECHANICAL ENGINEERING 2161908 Refrigeraton and Air Conditoning 11-05-2018

103 OIT,PANCHMAHAL 19 MECHANICAL ENGINEERING 2161909 Producton Technology 11-05-2018

103 OIT,PANCHMAHAL 19 MECHANICAL ENGINEERING 2181909 Project – II 14-05-2018

103 OIT,PANCHMAHAL 19 MECHANICAL ENGINEERING 2181913 Product Design And Value Engineering 11-05-2018

103 OIT,PANCHMAHAL 19 MECHANICAL ENGINEERING 2181920 Quality Engineering 11-05-20185Sem:

117 NEOTECH,Vadodara 06 CIVIL ENGINEERING 2150002 Insttute Electve - Cyber Security 08-06-2018

117 NEOTECH,Vadodara 06 CIVIL ENGINEERING 2150601 Highway Engineering 14-06-2018

117 NEOTECH,Vadodara 06 CIVIL ENGINEERING 2150602 Hydrology & Water Resources Engineering 12-06-2018

117 NEOTECH,Vadodara 06 CIVIL ENGINEERING 2150603 Environmental Engineering 12-06-2018

117 NEOTECH,Vadodara 06 CIVIL ENGINEERING 2150608 Structural Analysis-II 13-06-2018

117 NEOTECH,Vadodara 06 CIVIL ENGINEERING 2150609 Soil Mechanics 11-06-20186Sem:

Page 53 of 57




117 NEOTECH,Vadodara 06 CIVIL ENGINEERING 2160601 Advanced Constructon and Equipments 07-06-2018

117 NEOTECH,Vadodara 06 CIVIL ENGINEERING 2160602 Applied Fluid Mechanics 08-06-2018

117 NEOTECH,Vadodara 06 CIVIL ENGINEERING 2160603 Railway, Bridge & Tunnel Engineering 11-06-2018

117 NEOTECH,Vadodara 06 CIVIL ENGINEERING 2160604 Water & Waste Water Engineering 12-06-2018

117 NEOTECH,Vadodara 06 CIVIL ENGINEERING 2160607 Elementary Structural Design 13-06-2018

117 NEOTECH,Vadodara 06 CIVIL ENGINEERING 2160608 Urban Transportaton system 14-06-20188Sem:

117 NEOTECH,Vadodara 06 CIVIL ENGINEERING 2180602 Harbour & Airport Engineering 19-05-2018

117 NEOTECH,Vadodara 06 CIVIL ENGINEERING 2180605 Project – II 18-05-2018

117 NEOTECH,Vadodara 06 CIVIL ENGINEERING 2180609 Foundaton Engineering 10-05-2018

117 NEOTECH,Vadodara 06 CIVIL ENGINEERING 2180610 Design of Steel Structures 14-05-2018

117 NEOTECH,Vadodara 06 CIVIL ENGINEERING 2180610 Design of Steel Structures 15-05-2018

117 NEOTECH,Vadodara 06 CIVIL ENGINEERING 2180611 Constructon Management 16-05-2018

117 NEOTECH,Vadodara 06 CIVIL ENGINEERING 2180611 Constructon Management 17-05-2018

117 NEOTECH,Vadodara 06 CIVIL ENGINEERING 2180612 Design Of Prestressed Concrete Structures & Bridges

19-05-2018

6Sem:

117 NEOTECH,Vadodara 07 COMPUTER ENGINEERING 2160701 Sofware Engineering 07-06-2018

117 NEOTECH,Vadodara 07 COMPUTER ENGINEERING 2160703 Computer Graphics 08-06-2018

117 NEOTECH,Vadodara 07 COMPUTER ENGINEERING 2160707 Advanced Java 11-06-2018

117 NEOTECH,Vadodara 07 COMPUTER ENGINEERING 2160708 Web Technology 12-06-2018

117 NEOTECH,Vadodara 07 COMPUTER ENGINEERING 2160708 Web Technology 18-06-20188Sem:

117 NEOTECH,Vadodara 07 COMPUTER ENGINEERING 2180703 Artfcial Intelligence 11-05-2018

117 NEOTECH,Vadodara 07 COMPUTER ENGINEERING 2180706 Project (Phase-II) 14-05-2018

117 NEOTECH,Vadodara 07 COMPUTER ENGINEERING 2180713 Web Data Management 15-05-20185Sem:

117 NEOTECH,Vadodara 09 ELECTRICAL ENGINEERING 2150002 Insttute Electve - Cyber Security 09-06-2018

117 NEOTECH,Vadodara 09 ELECTRICAL ENGINEERING 2150903 Power Electronics – I 11-06-2018

117 NEOTECH,Vadodara 09 ELECTRICAL ENGINEERING 2150904 Elements of Electrical Design 13-06-2018

117 NEOTECH,Vadodara 09 ELECTRICAL ENGINEERING 2150907 Microprocessor and Microcontroller Architecture & Interfacing

12-06-2018

117 NEOTECH,Vadodara 09 ELECTRICAL ENGINEERING 2150909 Control System Engineering 14-06-20186Sem:

117 NEOTECH,Vadodara 09 ELECTRICAL ENGINEERING 2160902 Power Electronics – II 11-06-2018

117 NEOTECH,Vadodara 09 ELECTRICAL ENGINEERING 2160904 High Voltage Engineering 12-06-2018

117 NEOTECH,Vadodara 09 ELECTRICAL ENGINEERING 2160908 Electrical Power system – II 13-06-2018

117 NEOTECH,Vadodara 09 ELECTRICAL ENGINEERING 2160912 Design of DC Machines and Transformer 14-06-2018

117 NEOTECH,Vadodara 09 ELECTRICAL ENGINEERING 2160913 Control of Electrical Drives 15-06-20187Sem:

117 NEOTECH,Vadodara 09 ELECTRICAL ENGINEERING 2170908 Switch Gear and Protecton 10-05-20188Sem:

117 NEOTECH,Vadodara 09 ELECTRICAL ENGINEERING 2180901 Testng and Commissioning of Electrical Equipments

11-05-2018

117 NEOTECH,Vadodara 09 ELECTRICAL ENGINEERING 2180903 Power System Planning and Design 10-05-2018

117 NEOTECH,Vadodara 09 ELECTRICAL ENGINEERING 2180905 Project 12-05-2018

117 NEOTECH,Vadodara 09 ELECTRICAL ENGINEERING 2180910 Energy Conservaton, And Audit 14-05-20185Sem:

117 NEOTECH,Vadodara 19 MECHANICAL ENGINEERING 2151902 Theory of Machines 11-06-2018

117 NEOTECH,Vadodara 19 MECHANICAL ENGINEERING 2151903 Fluid Power Engineering 07-06-2018

117 NEOTECH,Vadodara 19 MECHANICAL ENGINEERING 2151907 Design of Machine Elements 13-06-2018

Page 54 of 57




117 NEOTECH,Vadodara 19 MECHANICAL ENGINEERING 2151908 Control Engineering 08-06-2018

117 NEOTECH,Vadodara 19 MECHANICAL ENGINEERING 2151909 Heat Transfer 07-06-20186Sem:

117 NEOTECH,Vadodara 19 MECHANICAL ENGINEERING 2161901 Dynamics of Machinery 11-06-2018

117 NEOTECH,Vadodara 19 MECHANICAL ENGINEERING 2161901 Dynamics of Machinery 11-06-2018, 12-06-2018, 13-06-2018

117 NEOTECH,Vadodara 19 MECHANICAL ENGINEERING 2161902 Internal Combuston Engines 07-06-2018, 08-06-2018, 09-06-2018

117 NEOTECH,Vadodara 19 MECHANICAL ENGINEERING 2161903 Computer Aided Design 11-06-2018, 12-06-2018, 13-06-2018

117 NEOTECH,Vadodara 19 MECHANICAL ENGINEERING 2161907 Industrial Engineering 11-06-2018, 12-06-2018, 13-06-2018

117 NEOTECH,Vadodara 19 MECHANICAL ENGINEERING 2161908 Refrigeraton and Air Conditoning 07-06-2018, 08-06-2018, 09-06-2018

117 NEOTECH,Vadodara 19 MECHANICAL ENGINEERING 2161909 Producton Technology 07-06-2018, 08-06-2018, 09-06-2018

117 NEOTECH,Vadodara 19 MECHANICAL ENGINEERING 2161909 Producton Technology 11-06-20187Sem:

117 NEOTECH,Vadodara 19 MECHANICAL ENGINEERING 2171909 Machine Design 19-05-20188Sem:

117 NEOTECH,Vadodara 19 MECHANICAL ENGINEERING 2181909 Project – II 17-05-2018, 18-05-2018, 19-05-2018

117 NEOTECH,Vadodara 19 MECHANICAL ENGINEERING 2181915 Automobile Engineering 19-05-2018

117 NEOTECH,Vadodara 19 MECHANICAL ENGINEERING 2181920 Quality Engineering 11-05-2018

117 NEOTECH,Vadodara 19 MECHANICAL ENGINEERING 2181920 Quality Engineering 11-05-2018, 12-05-2018

5Sem:

124 SPCE,ANAND 06 CIVIL ENGINEERING 2150002 Insttute Electve - Cyber Security 14-06-2018

124 SPCE,ANAND 06 CIVIL ENGINEERING 2150601 Highway Engineering 14-06-2018

124 SPCE,ANAND 06 CIVIL ENGINEERING 2150602 Hydrology & Water Resources Engineering 12-06-2018

124 SPCE,ANAND 06 CIVIL ENGINEERING 2150603 Environmental Engineering 12-06-2018

124 SPCE,ANAND 06 CIVIL ENGINEERING 2150608 Structural Analysis-II 13-06-2018

124 SPCE,ANAND 06 CIVIL ENGINEERING 2150609 Soil Mechanics 14-06-20186Sem:

124 SPCE,ANAND 06 CIVIL ENGINEERING 2160601 Advanced Constructon and Equipments 07-06-2018

124 SPCE,ANAND 06 CIVIL ENGINEERING 2160602 Applied Fluid Mechanics 08-06-2018

124 SPCE,ANAND 06 CIVIL ENGINEERING 2160603 Railway, Bridge & Tunnel Engineering 11-06-2018

124 SPCE,ANAND 06 CIVIL ENGINEERING 2160604 Water & Waste Water Engineering 12-06-2018

124 SPCE,ANAND 06 CIVIL ENGINEERING 2160607 Elementary Structural Design 13-06-2018Page 55 of 57




124 SPCE,ANAND 06 CIVIL ENGINEERING 2160608 Urban Transportaton system 14-06-20187Sem:

124 SPCE,ANAND 06 CIVIL ENGINEERING 2170003 Project - I 18-05-2018

124 SPCE,ANAND 06 CIVIL ENGINEERING 2170607 Design of Reinforced Concrete Structures 15-05-2018

124 SPCE,ANAND 06 CIVIL ENGINEERING 2170609 Irrigaton Engineering 18-05-2018

124 SPCE,ANAND 06 CIVIL ENGINEERING 2170610 Professional Practces & Valuaton 18-05-2018

124 SPCE,ANAND 06 CIVIL ENGINEERING 2170613 Trafc Engineering 19-05-20188Sem:

124 SPCE,ANAND 06 CIVIL ENGINEERING 2180602 Harbour & Airport Engineering 19-05-2018

124 SPCE,ANAND 06 CIVIL ENGINEERING 2180605 Project – II 18-05-2018

124 SPCE,ANAND 06 CIVIL ENGINEERING 2180609 Foundaton Engineering 10-05-2018

124 SPCE,ANAND 06 CIVIL ENGINEERING 2180609 Foundaton Engineering 11-05-2018

124 SPCE,ANAND 06 CIVIL ENGINEERING 2180610 Design of Steel Structures 14-05-2018

124 SPCE,ANAND 06 CIVIL ENGINEERING 2180610 Design of Steel Structures 15-05-2018

124 SPCE,ANAND 06 CIVIL ENGINEERING 2180611 Constructon Management 16-05-20186Sem:

124 SPCE,ANAND 07 COMPUTER ENGINEERING 2160701 Sofware Engineering 07-06-2018

124 SPCE,ANAND 07 COMPUTER ENGINEERING 2160707 Advanced Java 11-06-2018

124 SPCE,ANAND 07 COMPUTER ENGINEERING 2160708 Web Technology 12-06-2018

124 SPCE,ANAND 07 COMPUTER ENGINEERING 2160711 .Net Technology 08-06-20186Sem:

124 SPCE,ANAND 09 ELECTRICAL ENGINEERING 2160902 Power Electronics – II 14-06-2018

124 SPCE,ANAND 09 ELECTRICAL ENGINEERING 2160904 High Voltage Engineering 15-06-2018

124 SPCE,ANAND 09 ELECTRICAL ENGINEERING 2160908 Electrical Power system – II 12-06-2018

124 SPCE,ANAND 09 ELECTRICAL ENGINEERING 2160911 Computer Aided Analysis and Design for Electrical Engg.

11-06-2018

124 SPCE,ANAND 09 ELECTRICAL ENGINEERING 2160912 Design of DC Machines and Transformer 13-06-2018

124 SPCE,ANAND 09 ELECTRICAL ENGINEERING 2160913 Control of Electrical Drives 11-06-20188Sem:

124 SPCE,ANAND 09 ELECTRICAL ENGINEERING 2180901 Testng and Commissioning of Electrical Equipments

16-05-2018

124 SPCE,ANAND 09 ELECTRICAL ENGINEERING 2180903 Power System Planning and Design 17-05-2018

124 SPCE,ANAND 09 ELECTRICAL ENGINEERING 2180905 Project 18-05-2018

124 SPCE,ANAND 09 ELECTRICAL ENGINEERING 2180910 Energy Conservaton, And Audit 19-05-20186Sem:

124 SPCE,ANAND 16 INFORMATION TECHNOLOGY



2160707 Advanced Java 08-06-2018


2160708 Web Technology 11-06-2018


2160711 .Net Technology 13-06-2018



8Sem:






2181606 Project (Phase-II) 14-05-2018

5Sem:

124 SPCE,ANAND 19 MECHANICAL ENGINEERING 2151902 Theory of Machines 13-06-2018

Page 56 of 57




124 SPCE,ANAND 19 MECHANICAL ENGINEERING 2151903 Fluid Power Engineering 11-06-2018

124 SPCE,ANAND 19 MECHANICAL ENGINEERING 2151907 Design of Machine Elements 14-06-2018

124 SPCE,ANAND 19 MECHANICAL ENGINEERING 2151908 Control Engineering 07-06-2018

124 SPCE,ANAND 19 MECHANICAL ENGINEERING 2151909 Heat Transfer 11-06-20186Sem:

124 SPCE,ANAND 19 MECHANICAL ENGINEERING 2161901 Dynamics of Machinery 13-06-2018, 14-06-2018

124 SPCE,ANAND 19 MECHANICAL ENGINEERING 2161902 Internal Combuston Engines 11-06-2018, 12-06-2018

124 SPCE,ANAND 19 MECHANICAL ENGINEERING 2161903 Computer Aided Design 13-06-2018, 14-06-2018

124 SPCE,ANAND 19 MECHANICAL ENGINEERING 2161907 Industrial Engineering 07-06-2018, 08-06-2018

124 SPCE,ANAND 19 MECHANICAL ENGINEERING 2161908 Refrigeraton and Air Conditoning 11-06-2018, 12-06-2018

124 SPCE,ANAND 19 MECHANICAL ENGINEERING 2161909 Producton Technology 07-06-2018, 08-06-2018

8Sem:

124 SPCE,ANAND 19 MECHANICAL ENGINEERING 2181909 Project – II 17-05-2018

124 SPCE,ANAND 19 MECHANICAL ENGINEERING 2181916 Energy Conservaton And Management 18-05-2018

Exam Time : 9:30 am OnwardsImportant Instructons for students appearing in above mentoned examinatons:

1. All the students of Zone - 3 Insttutes are instructed to remain present at the exam center as per the scheduled date and tme.2. All the students are required to carry their hall tcket with them, issued by the University, at the tme of the exam.3. All the students must be present at their respectve examinaton hall 30 minutes before the commencement of the examinatons.

I/c Controller of Examinaton Gujarat Technological University

Page 57 of 57

Documents

BE Semester - 6,8 (Regular) & 5,7 (Remedial) …old.gtu.ac.in/examtimetable/S2018/be5678_z3.pdf001ADIT, Karamsad 02AUTOMOBILE ENGINEERING2180214Noise, Vibraton & Harshness And Safety12-05-2018