BDP-S360 Ver 1.1(BR)

Sony CorporationVideo Business Group

MANUAL DE SERVIÇO

2009G0500-1© 2009.7

Published by Quality Assurance Dept.

REPRODUTOR DE DISCO

Ver. 1.1 09.2009

BDP-S360RMT-B104A

ESPECIFICAÇÕES

Brazilian Model

Modelo Brasileiro cor PRETO

TM

SistemaLaser: Laser semicondutor

Entradas e saídas(Nome da tomada:

LINE OUT R-AUDIO-L:Tomada RCA/2 Vrms/10 kilohms

DIGITAL OUT (OPTICAL):Tomada de saida óptica/–18 dBm(comprimento de onda 660 nm)

DIGITAL OUT (COAXIAL):Tomada RCAk/0.5 Vp-p/75 ohms

HDMI OUT:Conector padrão HDMI de 19 pinos

COMPONENT VIDEO OUT (Y, PB/CB, PR/CR) Tomada RCA/Y: 1.0Vp-p/PB/CB, PR/CR: 0.7Vp-p/75ohms

LINE OUT VIDEO:Tomada RCA/1.0 Vp-p/75 ohms

LAN (100):Terminbal 100BASE-TX

EXT:Porta para memória externa (Para conectar a memória externa)Saída CC: 5V 500mA Máx.

GeralRequisitos de alimentação:

110 – 240 V AC, 50/60 Hz

Consumo de energia:22 W

Dimensões (aprox.):430 mm × 216 mm × 56 mm (LxPxA), incluindo partes salientes

Peso (aprox.):2.1 kg

Temperatura de operação:5 ºC a 35 ºC

Umidade de operação:25 % a 80 %

Acessórios fornecidos

Projeto e especificaçes técnicas sujeitos a alteração sem prévio aviso.

- Cabo de alimentacao (1)- Cabo HDMI (1)- Controle remoto (1)- Pilhas tipo AA (2)

Tipo de tomada/Nível de saida/Impedância de carga)

BLU-RAY/DVD

– 2 –

BDP-S360

SAFETY CHECK-OUT

LEAKAGE TESTThe AC leakage from any exposed metal part to earth ground and from all exposed metal parts to any exposed metal part having a return to chassis, must not exceed 0.5 mA (500 microamperes). Leakage current can be measured by any one of three methods.1. A commercial leakage tester, such as the Simpson 229 or RCA

WT-540A. Follow the manufacturers' instructions to use these instruments.

2. A battery-operated AC milliammeter. The Data Precision 245 digital multimeter is suitable for this job.

3. Measuring the voltage drop across a resistor by means of a VOM or battery-operated AC voltmeter. The “limit” indication is 0.75V, so analog meters must have an accurate low-voltage scale. The Simpson 250 and Sanwa SH-63Trd are examples of a passive VOM that is suitable. Nearly all battery operated digital multimeters that have a 2V AC range are suitable. (See Fig. A)

1. Check the area of your repair for unsoldered or poorly-soldered connections. Check the entire board surface for solder splashes and bridges.

2. Check the interboard wiring to ensure that no wires are “pinched” or contact high-wattage resistors.

3. Look for unauthorized replacement parts, particularly transistors, that were installed during a previous repair. Point them out to the customer and recommend their replacement.

4. Look for parts which, though functioning, show obvious signs of deterioration. Point them out to the customer and recommend their replacement.

5. Check the line cord for cracks and abrasion. Recommend the replacement of any such line cord to the customer.

6. Check the B+ voltage to see it is at the values specified.7. Check the antenna terminals, metal trim, “metallized” knobs,

screws, and all other exposed metal parts for AC leakage. Check leakage as described below.

After correcting the original service problem, perform the following safety checks before releasing the set to the customer:

1.5 kΩ0.15 µFACvoltmeter(0.75 V)

To Exposed MetalParts on Set

Earth Ground

Fig. A. Using an AC voltmeter to check AC leakage.

Unleaded solderBoards requiring use of unleaded solder are printed with the lead-free mark (LF) indicating the solder contains no lead.(Caution: Some printed circuit boards may not come printed with the lead free mark due to their particular size.)

: LEAD FREE MARKUnleaded solder has the following characteristics.• Unleaded solder melts at a temperature about 40°C higher than

ordinary solder. Ordinary soldering irons can be used but the iron tip has to be

applied to the solder joint for a slightly longer time. Soldering irons using a temperature regulator should be set to

about 350°C. Caution: The printed pattern (copper foil) may peel away if the

heated tip is applied for too long, so be careful!• Strong viscosity Unleaded solder is more viscous (sticky, less prone to flow) than

ordinary solder so use caution not to let solder bridges occur such as on IC pins, etc.

• Usable with ordinary solder It is best to use only unleaded solder but unleaded solder may

also be added to ordinary solder.

CAUTION:The use of optical instrument with this product will increase eye hazard.

CAUTIONUse of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radia-tion exposure.

This label is located on the laser protective housing inside the enclosure.

WARNING!!WHEN SERVICING, DO NOT APPROACH THE LASER EXIT WITH THE EYE TOO CLOSELY. IN CASE IT IS NECESSARY TO CONFIRM LASER BEAM EMISSION, BE SURE TO OBSERVE FROM A DISTANCE OF MORE THAN 25 cm FROM THE SURFACE OF THE OBJEC-TIVE LENS ON THE OPTICAL PICK-UP BLOCK.

SAFETY-RELATED COMPONENT WARNING!!

COMPONENTS IDENTIFIED BY MARK OR DOTTED LINE WITH MARK ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS LIST ARE CRITICAL TO SAFE OPERATION. RE-PLACE THESE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.

ATTENTION AU COMPOSANT AYANT RAPPORT À LA SÉCURITÉ!

LES COMPOSANTS IDENTIFIÉS PAR UNE MARQUE SUR LES DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE REMPLACER CES COMPOSANTS QUE PAR DES PIÈCES SONY DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU DANS LES SUPPLÉ-MENTS PUBLIÉS PAR SONY.

This appliance is classified as a CLASS 1 LASER product. The CLASS 1 LASER PRODUCT MARKING is located on the laser protective housing inside the enclosure. (EC1, EC2, CEK, Australian, Chinese, Russian, Saudi Arabia, Hong Kong, Taiwan, Korea, Thai)

– 3 –

BDP-S360

TABLE OF CONTENTS

Section Title Page Section Title Page

1. SERVICE NOTE

1-1. Disc Removal Procedure If The Tray Cannot Be Ejected (Forced Ejection) ............................................. 1-11-2. Work when optical device are replaced ........................ 1-11-3. Test Disc ....................................................................... 1-2 1-3-1. Operation and Display ............................................. 1-2

2. DISASSEMBLY

2-1. Disassembly Flow ........................................................ 2-12-2. Upper Case .................................................................. 2-12-3. Front Panel Assy .......................................................... 2-22-4. BD Drive ....................................................................... 2-22-5. Rear Panel Block.......................................................... 2-32-6. MB-127 Board .............................................................. 2-32-7. Switching Regulator ..................................................... 2-42-11. Circuit Boards Location ................................................ 2-4

3. BLOCK DIAGRAMS

3-1. Overall Block Diagram.................................................. 3-13-2. DSP Block Diagram ...................................................... 3-23-3. AV OUT Block Diagram ................................................ 3-33-4. USB/ETHER, FL Block Diagram .................................. 3-43-5. Power Block Diagram (1/2) .......................................... 3-53-6. Power Block Diagram (2/2) .......................................... 3-6

4. SCHEMATIC DIAGRAMS

4-1. This Note Is Common For Schematic Diagrams .......... 4-14-2. Frame Schematic Diagram........................................... 4-24-3. FL-193 Board (SWITCH) Schematic Diagram ............. 4-34-4. FR-301 Board (FL DRIVER) Schematic Diagram ........ 4-44-5. MB-127 Board (MC10121F1 DDR2-A) Schematic Diagram (1/14)............................................ 4-54-6. MB-127 Board (MC10121F1 DDR2-B) Schematic Diagram (2/14)............................................ 4-64-7. MB-127 Board (POWER1) Schematic Diagram (3/14)............................................ 4-74-8. MB-127 Board (CLK/POWER2) Schematic Diagram (4/14)............................................ 4-84-9. MB-127 Board (FLASH/HOST) Schematic Diagram (5/14)............................................ 4-94-10. MB-127 Board (USB) Schematic Diagram (6/14)......... 4-104-11. MB-127 Board (HDMI/SATA) Schematic Diagram (7/14)............................................ 4-114-12. MB-127 Board (AUDIO/VIDEO) Schematic Diagram (8/14)............................................ 4-12

4-13. MB-127 Board (GPIO/JTAG) Schematic Diagram (9/14)............................................ 4-134-14. MB-127 Board (IPIO) Schematic Diagram (10/14).......................................... 4-144-15. MB-127 Board (ETHERNET) Schematic Diagram (11/14) .......................................... 4-154-16. MB-127 Board (RF SDRAM) Schematic Diagram (12/14).......................................... 4-164-17. MB-127 Board (DRIVE/RF) Schematic Diagram (13/14).......................................... 4-174-18. MB-127 Board (IFD) Schematic Diagram (14/14) ........ 4-184-19. USB-014 Board (USB CONNECTOR) Schematic Diagram ...................................................... 4-194-20. Waveforms ................................................................... 4-20

5. PRINTED WIRING BOARDS

5-1. This Note Is Common For Printed Wiring Boards ........ 5-15-2. FL-193 Board (SWITCH) Printed Wiring Board............ 5-25-3. FR-301 Board (FL DRIVER) Printed Wiring Board (Side A) ...................................... 5-35-4. FR-301 Board (FL DRIVER) Printed Wiring Board (Side B) ...................................... 5-45-5. MB-127 Board (MAIN) Printed Wiring Board (Side A) ...................................... 5-55-6. MB-127 Board (MAIN) Printed Wiring Board (Side B) ...................................... 5-65-7. USB-014 Board (USB CONNECTOR) Printed Wiring Board .................................................... 5-7

6. IC PIN FUNCTION DESCRIPTION ................... 6-1

7. SERVICE MODE ..................................................... 7-1

8. ERROR LOG LIST ................................................. 8-1

9. TROUBLESHOOTING ............................................. 9-1

10. REPAIR PARTS LIST

10-1. Exploded Views ............................................................ 10-1 10-1-1. Case Section ........................................................... 10-1 10-1-2. Front/Rear Chassis Section .................................... 10-2 10-1-3. Main Chassis Section .............................................. 10-3 10-1-4. BD Section .............................................................. 10-4 10-1-5. Accessories ............................................................. 10-510-2. Electrical Parts List ....................................................... 10-6

1-1

BDP-S360SECTION 1

SERVICE NOTE

1-1. DISC REMOVAL PROCEDURE IF THE TRAY CANNOT BE EJECTED (FORCED EJECTION)

1. Remove the upper case. (Refer to page 2-1)2. Insert a clip in the hole of a drive and open a tray. Note: Use a clip of about 1.2 mm in the diameter

1-2. Work when optical device are replaced

Note: Please do the following work when you replace the optical device.

1. Install it in PC after downloading two set of software from following URL. (About the procedure, refer to the attached Readme.txt file)

STEP 1 Microsoft .NET Framework Version 2.0 Redistributable Package (x86) http://www.microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=0856eacb-4362-4b0d-8edd-aab15c5e04f5

STEP 2 Microsoft .NET Framework 2.0 Service Pack 1 (x86) http://www.microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=79bc3b77-e02c-4ad3-aacf-a7633f706ba5

2. Take the photograph the part of the bar code of the optical device. (Refer to the following picture)

3. Drag-and-drop the bar code photograph to the icon of decode software (BDBUDec). * The decode software is a complete set of “BDBUDec”, “Tasman.Bars.dll”, and “SavePath”. * Because docode software cannot be attached, it separately distributes it.

4. Input the password when you start decode software.* Inquire of each service headquarters because the password cannot be disclosed.

5. Write the decode data to the set. (About the procedure, refer to the attached BU Adjustment flowchart.ppt file)

tray

clip(Use that of about 1.2 mm in the diameter)

hole

1-2

BDP-S360

1-3. TEST DISC

Part No. Description LayerJ-6090-199-A BLX-104 Single Layer

J-6090-200-A BLX-204 Dual Layer

3-702-101-01 CD (YEDS-18)

J-6090-088-A HLX-504 Single Layer (NTSC)

J-6090-089-A HLX-505 Dual Layer (NTSC)

J-6090-077-A HLX-506 Single Layer (PAL)

J-6090-078-A HLX-507 Dual Layer (PAL)

1-3-1. Operation and Display

Check Items1) BLX-104 1. Select 23.976Hz/1080p 2. Play “4.Motion pictures” 3. Check whether player can play back or not 4. Check each outputs Video: Composite/S Video/component/HDMI Audio: Digital out (Coaxial/Optical)/Audio out/5.1Ch output* When 1080/24p monitor is nothing, 1080i (59.94Hz or 50Hz) can use instead of 1080/24p. However this is temporary correspondence.

2) BLX-204 1. Select 1080i (59.94Hz or 50Hz) 2. Play “4.Motion pictures” 3. Check whether player can play back or not (Check the picture and sound output)

3) CD (YEDS-18) Check whether player can play back or not (Check the sound output)

4) HLX-504/505 (NTSC), HLX-506/507 (PAL) 1. After displayed Main Menu, select “1.Video” 2. Play “1.Color Bar 100%” (Check the picture and sound output) 3. Return to Menu 4. Play “Demonstration 4:3” or “5.Demonstration 16:9” (Check the picture and sound output)

1-3

BDP-S360

1-3-1-1. BLX-104 Menu Function (1)Main Menu

X

X

X

X

X

X

X

X

X

X X X

X X X

X

1) When the disc is inserted, 1. Video Signal of 59.94Hz/1080i of the Main Menu is selectively displayed.


Sub_menu1 is displayedTo Main Menu after playback from T2_C1 to T19_C1To Main Menu after playback of T20_C1To Main Menu after playback of T21_C1


* When returning to Main Menu after playback from each button of 59.94Hz/1080i, 1. Video Signal of 59.94Hz/1080i is selectively dis-played.

* When returning to Main Menu after playback from each button of 50Hz/1080i, 1. Video Signal of 50Hz/1080i is selectively displayed.* 5. AV Sync does not operate.Note: Txx_ Cxx Chapter No. Title No.

1-4

BDP-S360


To Main Menu after playback from T23_C1 to T40_C1To Main Menu after playback of T41_C1To Main Menu after playback of T42_C1


Sub_menu4 is displayed

* When returning to Main Menu after playback from each button of 59.94Hz/720P, 1. Video Signal of 59.94Hz/720P is selectively dis-played.

* When returning to Main Menu after playback from each button of 23.976Hz/1080P, 1. Video Signal of 23.976Hz/1080P is selectively displayed.

* 5. AV Sync does not operate.

1-5

BDP-S360

1-3-1-4. BLX-104 Menu Function (4)Sub menu1

XX

X

X

X

X

X

1) At the display of Sub menu1, 1. Color Bar 100% is selectively displayed.2) Selection of 1. Color Bar 100% t Return to Sub menu1 after seamless playback from T1_C1 to T1_C13. 1. Color Bar 100% is selec-

tively displayed on Sub menu1 screen.3) Selection of 2. Color Bar 75% t Return to Sub menu1 after seamless playback from T1_C2 to T1_C13. 1. Color Bar 100% is selectively

displayed on Sub menu1 screen.4) At the selection of 3 - 13, item 3 mentioned above is executed as the routine.5) At the display of Sub menu1, Main Menu is selected t Jump to Main Menu. At the display of Main Menu, 1. Video Signal of 59.94Hz/1080i

is selectively displayed.6) Selection of LPCM Audio t Playback from T2_C1 to T19_C1. SubPic that corresponds to Audio stream 1 is forcibly displayed. During the playback, when audio channel changes, the caption that corresponds to each audio stream is forcibly displayed. Return to

Sub menu1 after playback. 1. Color Bar 100% is selectively displayed on Sub menu1 screen.7) Selection of Dolby AC-3 Audio t Playback of T20_C1. SubPic that corresponds to Audio stream 1 is forcibly displayed. During the playback, when audio channel changes, the caption that corresponds to each audio stream is forcibly displayed. Return to

Sub menu1 after playback. 1. Color Bar 100% is selectively displayed on Sub menu1 screen.8) Selection of Motion Picture t Return to Sub menu1 after playback of T21_C1. 1. ColorBar 100% is selectively displayed on Sub

menu1 screen.9) At the selection of Main Menu, 1. VideoSignal of 1080/59.94i of Main Menu is selectively displayed.10) AV Sync does not operate.

1-6

BDP-S360


X

X

X

X

X

X

1) At the display of Sub menu2, 1. Color Bar 100% is selectively displayed.2) Selection of 1. Color Bar 100% t Return to Sub menu2 after seamless playback from T43_C1 to T43_C13. 1. Color Bar 100% is

selectively displayed on Sub menu2 screen.3) Selection of 2. Color Bar 75% t Return to Sub menu2 after seamless playback from T43_C2 to T43_C13. 1. Color Bar 100% is se-

lectively displayed on Sub menu2 screen.4) At the selection of 3 - 13, item 3 mentioned above is executed as the routine.5) At the display of Sub menu2, Main Menu is selected t Jump to Main Menu. At the display of Main Menu, 1. Video Signal of

23.976Hz/1080P is selectively displayed.6) Selection of LPCM Audio t Playback from T44_C1 to T50_C1. SubPic that corresponds to Audio stream 1 is forcibly displayed. During the playback, when audio channel changes, the caption that corresponds to each audio stream is forcibly displayed. Return to


Sub menu2 after playback. 1. Color Bar 100% is selectively displayed on Sub menu2 screen.8) Selection of Motion Picture t Return to Sub menu2 after playback of T52_C1. 1. Color Bar 100% is selectively displayed on Sub

menu2 screen.9) At the selection of Main Menu, 1. Video Signal of 1080/23.976P of Main Menu is selectively displayed.10) AV Sync does not operate.

1-7

BDP-S360


X

X

X

X

X

X



lectively displayed on Sub menu3 screen.4) At the selection of 3 - 13, item 3 mentioned above is executed as the routine.5) At the display of Sub menu3, Main Menu is selected t Jump to Main Menu. At the display of Main Menu, 1. Video Signal of 50Hz/1080i




menu3 screen.9) At the selection of Main Menu, 1. Video Signal of 1080/50i of Main Menu is selectively displayed.10) AV Sync does not operate.

1-8

BDP-S360


XX

X

X

X

X

X



lectively displayed on Sub menu4 screen.4) At the selection of 3 - 13, item 3 mentioned above is executed as the routine.5) At the display of Sub menu4, Main Menu is selected t Jump to Main Menu. At the display of Main Menu, 1. Video Signal of 59.94Hz/720P




menu4 screen.9) At the selection of Main Menu, 1. Video Signal of 720/59.94P of Main Menu is selectively displayed.10) AV Sync does not operate.

1-9

BDP-S360


X

X

X

X

X

X

XX

X

X X X X

X X

X

X

X

1) When the disc is inserted, 1. Video Signal of 59.94Hz/1080i of the Main Menu is selectively displayed.


Sub_menu1 is displayedTo Main Menu after playback from T2_C1 to T19_C1To Main Menu after playback of T20_C1To Main Menu after playback of T21tT63tT64tT65tT66

Sub_menu3 is displayedTo Main Menu after playback of T54_C1-T60_C1tT83_C1-T94_C1To Main Menu after playback of T61_C1To Main Menu after playback of T62tT82

To Main Menu after playback of T67_C1


* When returning to Main Menu after playback from each button of 59.94Hz/1080i, 1. Video Signal of 59.94Hz/1080i is selectively dis-played.

* When returning to Main Menu after playback from each button of 50Hz/1080i, 1. Video Signal of 50Hz/1080i is selectively displayed.Note: Txx_ Cxx Chapter No. Title No.

1-10

BDP-S360



Sub_menu2 is displayedTo Main Menu after playback of T44_C1-T50_C1tT71_C1-T81_C1To Main Menu after playback of T51_C1To Main Menu after playback of T52_C1tT69



* When returning to Main Menu after playback from each button of 59.94Hz/720P, 1. Video Signal of 59.94Hz/720P is selectively dis-played.

* When returning to Main Menu after playback from each button of 23.976Hz/1080P, 1. Video Signal of 23.976Hz/1080P is selectively displayed.

1-11

BDP-S360

1-3-2-4. BLX-204 Menu Function (4)Sub menu 1

XX

X

X

X

X

X

1) At the display of Sub menu1, 1. Color Bar 100% is selectively displayed.2) Selection of 1. Color Bar 100% t Return to Sub menu1 after seamless playback from T1_C1 to T1_C13. 1. Color Bar 100% is selec-

tively displayed on Sub menu1 screen.3) Selection of 2. Color Bar 75% t Return to Sub menu1 after seamless playback from T1_C2 to T1_C13. 1. Color Bar 100% is selectively

displayed on Sub menu1 screen.4) At the selection of 3 - 13, item 3 mentioned above is executed as the routine.5) At the display of Sub menu1, Main Menu is selected t Jump to Main Menu. At the display of Main Menu, 1. Video Signal of

59.94Hz/1080i is selectively displayed.6) Selection of LPCM Audio t Playback from T2_C1 to T19_C1. SubPic that corresponds to Audio stream 1 is forcibly displayed. During the playback, when audio channel changes, the caption that corresponds to each audio stream is forcibly displayed. Return to



menu1 screen.9) Selection of AV Sync t Return to Sub menu1 after playback of T67_C1. 1. Color Bar 100% is selectively displayed on Sub menu1

screen.10) At the selection of Main Menu, 1. Video Signal of 1080/59.94i of Main Menu is selectively displayed.

1-12

BDP-S360


XX

X

X

X

X

X



lectively displayed on Sub menu2 screen.4) At the selection of 3 - 13, item 3 mentioned above is executed as the routine.5) At the display of Sub menu2, Main Menu is selected t Jump to Main Menu. At the display of Main Menu, 1. Video Signal of

23.976Hz/1080P is selectively displayed.6) Selection of LPCM Audio t Playback from T44_C1 to T50_C1 and from T71_C1 to T81_C1. SubPic that corresponds to Audio stream

1 is forcibly displayed. During the playback, when audio channel changes, the caption that corresponds to each audio stream is forcibly displayed. Return to


Sub menu2 after playback. 1. Color Bar 100% is selectively displayed on Sub menu2 screen.8) Selection of Motion Picture t Return to Sub menu2 after playback of T52_C1 and T69. 1. Color Bar 100% is selectively displayed on

Sub menu2 screen.9) Selection of AV Sync t Return to Sub menu2 after playback of T70_C1. 1. Color Bar 100% is selectively displayed on Sub menu2

screen.10) At the selection of Main Menu, 1. Video Signal of 1080/23.976P of Main Menu is selectively displayed.

1-13

BDP-S360


XX

X

X

X

X

X



lectively displayed on Sub menu3 screen.4) At the selection of 3 - 13, item 3 mentioned above is executed as the routine.5) At the display of Sub menu3, Main Menu is selected t Jump to Main Menu. At the display of Main Menu, 1. Video Signal of 50Hz/1080i

is selectively displayed.6) Selection of LPCM Audio t Playback from T54_C1 to T60_C1 and from T84_C1 to T94_C1. SubPic that corresponds to Audio stream

1 is forcibly displayed. During the playback, when audio channel changes, the caption that corresponds to each audio stream is forcibly displayed. Return to


Sub menu3 after playback. 1. Color Bar 100% is selectively displayed on Sub menu3 screen.8) Selection of Motion Picture t Return to Sub menu3 after playback of T62_C1 and T82. 1. Color Bar 100% is selectively displayed on

Sub menu3 screen.9) Selection of AV Sync t Return to Sub menu3 after playback of T83_C1. 1. Color Bar 100% is selectively displayed on Sub menu3

screen.10) At the selection of Main Menu, 1. Video Signal of 1080/50i of Main Menu is selectively displayed.

1-14E

BDP-S360


XX

X

X

X

X

X



lectively displayed on Sub menu4 screen.4) At the selection of 3 - 13, item 3 mentioned above is executed as the routine.5) At the display of Sub menu4, Main Menu is selected t Jump to Main Menu. At the display of Main Menu, 1. Video Signal of 59.94Hz/720P




menu4 screen.9) Selection of AV Sync t Return to Sub menu4 after playback of T68_C1. 1. Color Bar 100% is selectively displayed on Sub menu4

screen.10) At the selection of Main Menu, 1. Video Signal of 720/59.94P of Main Menu is selectively displayed.

1-15

BDP-S360

1-4. DRIVE REPAIRING1-4-1. Preparation

1-4-2. Checking Flow ~ Drive (BU) section ~

• ESD Measures It is necessary to check the working space ESD condition before starting the Drive Part (BU) repairs

The ESD-resistance of BD Laser is weaker than DVD/CD Laser.

To prevent ESD destruction, please make sure the working space and human ESD.

Flow chart No.xx (other check sheet)

Yes

Check/replace the FFC cable, then check BDP-S360 operates normally.

FFC Cable(1-xxxxxxxx)

No

OK

Yes

NoCheck the Optical Block Unit (BU) by service mode . (Flowchart zz)BU Iop is OK?

Replace the BU.

Yes BDP-S360 can play the DVD/CD-disc.BDP-S360 can play the BD-disc.

No

Yes

No

BLX-104 DVD TEST DISC HLX-513CD TEST DISC HLX-A1

B

B

Check Drive Power Supply CN301 15p 12V / 12p 5V?

Check PS301,303 and 304Replace PS when open

Yes

No

Optical Block Check (Flowchart yy)

A

A

Ver. 1.1 09.2009

1-16

BDP-S360

1-4-3. BU Check Flow [zz] ~

Before BU Replacement ~

Enter the Service Mode

Select [2] DriveMenu

Select [7]DeltaIOPCheck for checking. specification

BD,DVD,CD; within 12Iop is out of specification,

replace BU to new one.

Check DriveDeviceDiag

No

Yes

Optical Block Check (Flowchart yy)

1-4-4. BU (Optical Block) Repair Guide

BDP 4G (BDP-S360) series component structure is as same as conventional DVD Players.However BD player requires precise read out functions and also secure contents Protection system.Since above requirement, it is necessary to set/adjust BU data to EEPROM.

The following cases need Adjustments;(1)Replace BU (MB is original)(2)Replace MB (BU is original)(3)Replace both BU and MB

•JIG RequirementDigital camera (recommend with macro mode)Barcode decoder (4GBUJIG) installed in JIG PC’sUSB memory ESD work bench

•Procedure (all cases) Refer the diagram

Remarks: The servo adjustment procedure will be carried out during OP data Writing.There is no manual adjustment procedure. LD ON TIME history doesn’t carry over. Do not touch any optical block parts, Turn Table and during replacing. BD Laser diode is very sensitive!

Ver. 1.1 09.2009

1-17

BDP-S360

1-4-5. BU Adjustment Flow [yy] ~

1-4-6. KEM-430AAA/C2RP Packing Spec.

After BU/MB Replacement ~

Remove the defective BU from Loading Assy. Also remove the BU dumpers (4pcs)

Unpack new parts and take Barcode photo by camera

Assemble BU with dumpers to Loading Ass’y(tighten screw with 2kgf)

Decode the Barcode photo by usingBDBUDec and

save the text data to USB memory

Enter the service mode and insert USB memory to rear panel

Select [2]Drive Menu [3]RewriteOPData

After finishing the Rewrite OP data, confirm [7] DeltaIOPcheck for

BU Laser quality.

The Iop data is within specification, turn off the power

Turn On the Power and check the playbackperformance by using CD, DVD and BD.

DVD TEST DISC HLX-513CD TEST DISC HLX-A1

BLX-104

Don’t Reuse the bag!!

Open a box

Take a corrugatedcushion out

Don’t touch the area!!

Open a bag

Open a cushion

Take BU out

Ver. 1.1 09.2009

1-18

BDP-S360

1-4-7. KEM-430AAA/C2RP Folding Motor FFC

1-4-8. KEM-430AAA/C2RP Packing

$) tore it in %shion arton

2) tore it in In ivi %a arton

) tore it in aster arton

) aster carton is seae with the PP tape.

In ivi %a arton (BURP)

In ivi %a arton (BURP)

tick it to H.PP Tape

hip&ent Labe(are ark )

ntistatic Bag

Instr%ctionan%a

1Process the ben of .(Do as we as the state when &asspro %ction is packe )

2 It is necessary to fo the antistaticbag in or er of A to B.(P%rpose: To appy oosening to part C)

3et the %pper s%rface of the t%rntabe tothe part of the φ$ hoe.

tore $ in ivi %a cartons $ step X 2 steps= 2 in ivi %a cartons in the &aster carton.aster arton (BURP)

The si e with the t%rne fap is ai si e of the in ivi %a carton.

%shion arton (BURP)

Thing that is stopper of OP.

Ver. 1.1 09.2009

1-19

BDP-S360

1-4-9. BU Data Decode Jig

1-4-10. Loading For Service

JIG Name: BDBUDec. exe J-6090-212-ARelease : 2009.02.19Version : 1.0.0.0Software Contents:

BDBUDec.exe ; SoftwareSavePath.ini ; decoded file destination setting file (initial destination is C:¥BuData.txt)TasmanBars.dll ; decode dllUninst.exe ; unistall BDBUDec.exe from PC

Installations1.Unzip files to any PC Folder2.Check the attached Bar code photo click and drop onto BDBUDec.exe, the Password will

be required at first time only, no need P/W from second time.3.If there is the error message (.NET frame work requirements) please apply Microsoft .NET Framework 2.0 and 2.0 SP1 from Microsoft download site.

STEP 1Microsoft .NET Framework Version 2.0 Redistributable Package (x86)http://www.microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=0856eacb-4362-4b0d-

8edd-aab15c5e04f5

STEP 2Microsoft .NET Framework 2.0 Service Pack 1 (x86)http://www.microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=79bc3b77-e02c-4ad3-

aacf-a7633f706ba5

Remarks:Do not change the decoded file name “BuData.txt”.

BDP 4G Loading Ass’y service parts consists from 3 parts.Holder, Clamper AssyLoading AssyHolder FFC

Currently these parts are producing 2 venders. But the THERE IS NO COMPATIBILITY.So, please DO NOT MIX the and of Loading for service and original Loading.“Loading for service” A-1727-332-A (with Loading motor FFC)

FFC1-836-504-11

(Supplied folded)

Holder, FFC 4-137-203-0

(FFC Holder can be used both service parts and original

parts)

Holder, Clamper Assy

Loading AssyLaser Caution Label

Ver. 1.1 09.2009

1-20

BDP-S360

1-4-11. Laser Caution Label

(' )* +, +'%'-,%'% ,,' )*-

'&&,, ,

1-4-12. Useful service mode function

Jitter measurement.+/( /+%&%&-0%& , %&,10,2

3 & %&%&%1%, *'4& ,52

$(*,"* (*,6 &%& -

&1%2."78.9."7"".$"7$"

8/+%% ,-

$:"

$;

BD

$;:8

$<

.9.

* &$==.

(%,%$;"#

#&1/(9%,-2.

Ver. 1.1 09.2009

1-21

BDP-S360

1-5. BU SERVICE POLICY

BD/DVD/CD SATA Player Drive (BPD-200)

EMMA3PBE LSI

BE

BDP3G (S350)

BD/DVD/CDBare Drive

EMMA3PFFE + BE LSI

BDP4G

BDP3G = Complete BD Drive + BE LSI

BDP4G = BD Bare Drive + FE/BE LSI

BEFE

BPD-300

FE

BPD-300Bare Drive

BPD-200Complete Drive

LU + BU (

Ver. 1.1 09.2009

1-22

BDP-S360

for BPD-300KEM-410ADAnext

for BPD-200KEM-410ADA

OP = No ChangeFFC Length will change for New LU+ Cost down Items

." .

Ver. 1.1 09.2009

1-23

BDP-S360

In case of BU assy replacement:

1. OP related data for new assy is controlled by BU factory 2. All of data is recorded into a barcode label3. The label is put on the assy4. Service parts will be followed5. In service, the data should be read out from problem assy6. The read data should be saved to new assy

Fact finding:

1. The label is “DATA MATRIX” format2. The number of data is 91 words3. The method of reading and saving is required when BU and

main board are replaced.

New service method

1. All of BU data on the barcode label is shot by digital camera inorder to make a JPEG file of BU data.

2. Application software in the PC makes digital data from JPEG file.

3. The converted data is stored to USB memory.

4. The USB memory is connected to BDP 4G unit.

5. In service mode, there is a command to save the data from USB memory to board memory.

Ver. 1.1 09.2009

1-24

BDP-S360

Shoot the barcodeFormat is JEPG

Application SoftwareData convert fromJEPG TEXT

Save the TEXT data

USB device is connected to EXT USB terminal on the unit, and the TEXT data as new data is loaded to unit by service mode.

The application software will be a service jig with J parts number as service jig, and the recording media will be CD-R.

PN: J6090212ADescription: BDBUDEC

When instruction to PC, password is required.

The password will be supplied to only service HQ, and service center name, q’ty and all of software registered information should be maintained by service HQ, and Video will ask to report the registration information.

Ver. 1.1 09.2009

1-25E

BDP-S360

JIG Name: BDBUDEC J-6090-212-ARelease : 2009.02.19Version : 1.0.0.0

Software Contents:BDBUDec.exe ; SoftwareSavePath.ini ; decoded file destination setting file (initial destination is C:¥BuData.txt)TasmanBars.dll ; decode dllUninst.exe ; unistall BDBUDec.exe from PC

Installations1.Files to any PC Folder2.Check the attached Bar code photo click and drop onto BDBUDec.exe, the password willbe required at first time only, no need P/W from second time.3.If there is the error message (.NET frame work requirements) please applyMicrosoft .NET Framework 2.0 and 2.0 SP1 from Microsoft download site.

STEP 1Microsoft .NET Framework Version 2.0 Redistributable Package (x86)http://www.microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=0856eacb-4362-4b0d-8edd-aab15c5e04f5STEP 2Microsoft .NET Framework 2.0 Service Pack 1 (x86)http://www.microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=79bc3b77-e02c-4ad3-aacf-a7633f706ba5Remarks:Do not change the decoded file name “BuData.txt”.

Ver. 1.1 09.2009

2-1

BDP-S360SECTION 2

DISASSEMBLY• This set can be disassembled in the order shown below.

2-1. DISASSEMBLY FLOW

Note: Follow the disassembly procedure in the numerical order given.

2-2. UPPER CASE

2-2. UPPER CASE(Page 2-1)

2-3. FRONT PANELASSY(Page 2-2)

2-4. BD DRIVE(Page 2-2)

2-5. REAR PANEL BLOCK(Page 2-3)

2-7. SWITCHING REGULATOR(Page 2-4)

2-6. MB-127 BOARD(Page 2-3)

SET

1 tapping screw(tightening torque = 5.5 to 7.5 kgf•cm)

1 tapping screw(tightening torque = 5.5 to 7.5 kgf•cm)

2 three screws(tightening torque = 5.5 to 7.5 kgf•cm)

3 upper case

2-2

BDP-S360

2-3. FRONT PANEL ASSY

2-4. BD DRIVE

1 seven claws

2 front panel assy

7 four screws (BV3)(tightening torque = 5.5 to 7.5 kgf•cm)

8 BD drive

1 non-halogene tape

2 harness (PM-156)(CN2)

4 flexible flat cable(CN4261)




2-3

BDP-S360

2-5. REAR PANEL BLOCK

2-6. MB-127 BOARD

3 three screws (BV3)(tightening torque = 5.5 to 7.5 kgf•cm)

5 screw (P3)(tightening torque = 5.5 to 7.5 kgf•cm)

6 rear panel block

1 fan harness(CN1403)

4 screw (B3)(tightening torque = 4 to 5 kgf•cm)

2 two screws(tightening torque = 5.5 to 7.5 kgf•cm)

8 six screws (BV3)(tightening torque = 5.5 to 7.5 kgf•cm)

9 MB-127 board



7 harness (UV-005)(CN602)

1 flexible flat cable (FMF-003)(CN1404)




2-4E

BDP-S360

2-7. SWITCHING REGULATOR

2-8. CIRCUIT BOARDS LOCATION

4 five screws (BV3)(tightening torque = 5.5 to 7.5 kgf•cm)

5 switching regulator



1 harness (PF-139)(CN1)

FR-301 board

switching regulator

FL-193 board

MB-127 board

USB-014 board

3-1

BDP-S360SECTION 3

BLOCK DIAGRAMS

3-1. OVERALL BLOCK DIAGRAM

OPTICALTRANSMITTER

IC801

BD DRIVEDVD

Blu-rayDRIVE

MB-127 BOARD

MOTOR DRIVE

DVD/BD RFVIDEO

AUDIO(ANALOG OUTPUT)

AUDIO(DIGITAL OUTPUT)

ETHERNET

USB

IC4201

MAIN SYSTEM CONTROL, DSP,SATA I/F, MEMORY CONTROL,A/V OUT, HDMI, ETHERNET I/F,

USB I/F

IC101

VIDEO AMPIC808

D/A CONVERTERIC804

LINE AMPIC807

Y

COMPONENTVIDEO OUTPB

PR

DIGITAL OUTPCM/DTS/DOLBY

DIGITAL

VIDEO

LINE OUT

AUDIO

L

R

COAXIAL

OPTICAL

J801

HDMI

LAN (100)ETHERNET PHY

IC1101CN1101

CN702

CN361EXT

USB-014BOARD

X110150MHz

X60130MHz

DDR2 SDRAM

IC104

IC105

IC204

IC205

16MS-FLASH

IC1245

64MSDRAM

IC1251

4M NORFLASH ROM

IC5012G NAND

FLASH ROM

IC502

X40127MHz

X120125MHz

HDMI OUT

REMOTECONTROLRECEIVER

IC701

S702

FR-301 BOARD

FL DRIVERIC702

SUB SYSTEMCONTROL

IC1403

D701(White)

D708(Blue)

ND701FLUORESCENT

INDICATORTUBE

x

S701Z

S703N

SWITCHINGREGULATOR

REGULATOR

REGULATOR

(AC IN)

FL-193BOARD

S331I/1

DR_SW12VDR_SW5VUNSW6VUNSW12V

UNSW12VAUNSW-9VA

UNSW6VA

IC806

IC805

PS802

Video/Audio +3.3VVideo -5VLine AMP B+/B-

PS804PS803

RESETIC809

IC1351

IC1280

IC304

IC802

IC301

IC302

IC311

P FAILIC1404

IC601

IC705

IC704

IC307

IC308

IC309

IC310

PS304

PS301PS303

DR_VCC8DR_VCC15DR_VCC33UNSW3.3VSW5VD+3.3V (AV)DCSW5VDCSW3.3V

VBUS+5V+3.3V (HDMI)SW3.3VMC-10121F1_SW3.3VDLL/HDVDD_1.05VPLL_1.05VDDR2_1.8VCORE_1.05V

FANCONTROL

IC1401

M1401(FAN)

MM

UNSW12V

UNSW6V

UNSW6VA

T701Q706, Q707

DC/DCCONVERTER

FR_6V

05

3-2

BDP-S360

3-2. DSP BLOCK DIAGRAM

4M NORFLASH ROM

IC501

2G NANDFLASH ROM

IC502

RFPA7

BD DRIVE

BD_RF+32

CN1301

CN4201

CN4261

MOTOR DRIVEIC4201

DVDBlu-rayDRIVE

SAIN1 28

MB-127 BOARD (1/3)

RFNA6BD_RF-

31RFP2A5

DVD_RF+29

RFN2A4DVD_RF-

28

AA12A

25BB11

B24

CB12C

23DA11

D22

EA9E

20FA10

F19

G/FOPB9G

18H/FOMB10

H17

SAO1+35SA_A+

37SAO1-36

SA_A-39

SAO2+37SA_B+

36SAO2-38

SA_B-38

FCO+18FD1

45FCO-17

FR144

TLO+14FD2

40TLO-15

FR241

TKO+13TD

43TKO-12

TR42

LDO+10LD+

1LDO-9

LD-2

PC2L2TRAY-OUT

5P50R6

TRAY-IN3

U45U

10V46

V9

W47W

8

HU+1HU+

11HU-2

HU-12

HV+3HV+

13HV-4

HV-14

HW+5HW+

15HW-6

HW-16

SLO1+39B

3SLO1-40

/B2

SLO2+41A

4SLO2-42

/A5

SLEDOUT34INSW

6

SDIOH3SDIO

6SDCKG2

SCLK8

SDCS0BH4SEN_LDD

7PSI4N4

PI_CONT34

ADIN1B15THERMO

9

PSI6P5XRST

PSI5M3

PA4J7

INSW_BU

5

FCSB1 AM29 nCE9

16MS-FLASH

IC1245

SFSIO0 K4 SI/SIO05

D0CLK0

D0BA0,D0BA1

D0CS1B

Y2 CK

BA0-BA2

J8D0CLK0B Y1

D0CLK1 AK2D0CLK1B AK1

/CKK8D0CKE AB5 CKEK2

D0CS0B AG4 /CSL8

D0DT0 AF7 ODTK9

SFSIO1 L3 SO/SIO12SFSIO2 J2 W/SIO23SFSIO3 J3 HOLD/SIO37SFSCK L4 SCK6

SFCS0B K3 CS1

64MSDRAM

IC1251

MBA0 F14 BA020MBA1 F12 BA121

MCLKOUT H13 CLK38MCKE G13 CKE37

RESET MC-10121F1_XRST12

SAIN2 29 PA5K8

FCIN 22 FDRVE1

DAOUT0E2TLIN 23

TKIN 24 TDRVF1

SLIN1 31 SDRV2C2

SLIN2 32 SDRV1D2

SPIN 54 MDRVD1

LDIN 8

CTL1 49 PB0/SW1D12CTL2 48 PB1/SW2D13

FG 51 FGM2


USB I/F

IC101

EMI_AD1-EMI_AD18

EMI_DT0-EMI_DT15

MA[0]-MA[11]

MD[0]-MD[15]

EMI_DT0-EMI_DT15

DDR2SDRAM

IC104

D0MA0-D0MA15

D0MA0-D0MA12

D0MA0-D0MA3,D0MA6-D0MA12

D0DQ0-D0DQ15

EMI_DT0-EMI_DT7

X40127MHz

R1

T1

XI

XO

K1

J1X120125MHz

X1

X2

AE1, A

D3, A

F4

L1-L

3

CK

BA0-BA2

J8/CKK8CKEK2/CSL8

ODTK9

DDR2SDRAM

IC105D0DQ16-D0DQ31

L1-L

3

D1CLK0

D1BA0,D1BA1

D1CS1B

AP25 CK

BA0-BA2

J8D1CLK0B AR25

D1CLK1 AP6D1CLK1B AR6

/CKK8D1CKE AM19 CKEK2

D1CS0B AP13 /CSL8

D1DT0 AR12 ODTK9

DDR2SDRAM

IC204

D1MA0-D1MA15

D1MA0-D1MA12

D1MA0-D1MA3,D1MA6-D1MA12

D1DQ0-D1DQ15

AR18, A

L19, AM

15

L1-L

3

CK

BA0-BA2

J8/CKK8CKEK2/CSL8

ODTK9

DDR2SDRAM

IC205D1DQ16-D1DQ31

L1-L

3

(3/3)(SEE PAGE 3-4)

(1/3)

1

05

3-3

BDP-S360

3-3. AV OUT BLOCK DIAGRAM

MB-127 BOARD (2/3)

7946131012

19

1615

(2/3)MAIN SYSTEM CONTROL, DSP,SATA I/F, MEMORY CONTROL,A/V OUT, HDMI, ETHERNET I/F,

USB I/F

IC101

Y

COMPONENTVIDEO OUTPB

PR

CEC2(3/3)(SEE PAGE 3-4)

VIDEO AMPIC808

VAY F33 SYIN8VAC H33 SCIN3

VAG H35 YIN10VAB F35 PBIN12VAR G34 PRIN14

D/A CONVERTERIC804

LINE AMP

Q816MUTING

Q806, Q811, Q812MUTE DRIVE

IC807

RESETIC809

AO1BD E28 SDTI3AO1MCK G27 MCLK1AO1BCK E29 BICK2

AO1LRCK F27 LRCK4AOUTL+ 12 3AOUTL- 11 2

AOUTR+ 10 5AOUTR- 9

VDD UNSW6VA9

DZFL 16D802

6S0DOUT D34 CDTI8

S0CKOUT D35 CCLK7GPIO28 AJ27 CSN6

DAC_XRST AK26 PDN5

OUT1

YOUT 23

PROUT 19

VOUT 28

PBOUT 21

GPIO27 AK28 PS116PS215

GPIO11 J28 LPFSW17

HD_YHD_PBHD_PR

SD_Y

XVMUTE

FORMAT1

SD_C

MC-10121F1_CSIO_DOMC-10121F1_CSIO_CKOMC-10121F1_CSIO_DAC2_XCSDAC_XRST

GPIO26 AH27 XAMUTE

BUFFERIC703

A 1Y4HHPD T31

ATX C30

CN702

J801

DIGITAL OUTPCM/DTS/DOLBY

DIGITAL

VIDEO

LINE OUT

AUDIO

L

R

COAXIAL

OPTICAL

HDMI OUT

+

+

1

7

OPTICALTRANSMITTER

IC801

Q801BUFFER

HTXP0 M34HTXN0 M35HTXP1 L34HTXN1 L35HTXP2 K34HTXN2 K35HTXCP N34HTXCN

TXP0TXN0TXP1TXN1TXP2TXN2TCKPTCKNN35

HDSDA V27HDSCL U27

TXP0TXN0TXP1TXN1TXP2TXN2TCKPTCKN

TMDS DATA0 +TMDS DATA0 -TMDS DATA1 +TMDS DATA1 -TMDS DATA2 +TMDS DATA2 -

TMDS CLOCK +TMDS CLOCK -

SDASCL

13CEC

HPD

Q701LEVEL SHIFT

Q702LEVEL SHIFT

05

3-4

BDP-S360

3-4. USB/ETHER, FL BLOCK DIAGRAM

REMOTECONTROLRECEIVER

IC701

S702

FR-301 BOARD

MB-127 BOARD (3/3)

CN701

CN1402

CN1404

3427

FL DRIVERIC702

SUB SYSTEM CONTROLIC1403

FLD_SDO 63 DIN7FLD_SCK 64 CLK8FLD_STB

FLD_SDOFLD_SCKFLD_STB2 STB9

SIRCS_IN 24

KEY1 48

TXD138TXD137MODE3/RESET

IF_RXDIF_TXDMODERESET 6

CN902

(JIG)

3465

UA0RXDBF31UA0TXDBG30GPIO21AK27GPIO22

RXDTXDDIPSW0DIPSW1 AG28

S2DIN C34 IF_SDO27S2DOUT C33 IF_SDI26S2CKIN C32 IF_SCK25S2CSB B33 XIF_CS43

RSTSWB H22 SYSCON_RST35

GPIO25 AJ26 SYSCON_REQ36GPIO15 F29 START_BIT

IF_SDOIF_SDIIF_SCKXIF_CS

MC-10121F1_XRST

PCIRSTB AD31

SYSCON_REQSTART_BIT

39

ETHERNET PHY

(3/3)

IC1101

ETRXD0 U30 RXD018ETRXD1 U31 RXD117ETRXER U29 RX_ER21

ETTXD0 V31 TXD023ETTXD1 V30 TXD124ETTXEN V32 TX_EN6

ETMDIO T33 MDIO4ETMDC T32 MDC2ETCRS U33 CRS_DV36

ETREFCLK T34 REFCLK

X110150MHz

14

nRST5

LED1 D701(White)

D708(Blue)

1

LED2 2

ND701FLUORESCENT

INDICATORTUBE


USB I/F

IC101

GRD1-GRD8, GRD11, GRD12

SEG1-SEG16

Q710LED DRIVE

Q711LED DRIVE

x

CN1101

LAN (100)

EXT

S701KEY2 47

RXP

Z

S703KEY3

LED_DTLED_CK

FLD_STB

SIRCS

KEY1

KEY2

KEY346CECCEC 22

N

108

14

13

17

11

15

108

USB-014 BOARD

CN362CN602

USBDP2 V34USBDM2 W34

DPDM

D+D-

23

23

CN361

32

14

13

17

11

15

X60130MHz

2

MC-10121F1_XRST

MC-10121F1_XRST

(1/3)(SEE PAGE 3-2)

(2/3)(SEE PAGE 3-3)

1

1

2

5

6

32

RXN 31

TXP 29

TXN 28

USBXO AE35

USBXI AF35

05

(IFCON FLASH WRITTER)

D701, D708(BLU-RAY DISC INDICATOR)

3-5

BDP-S360

3-5. POWER BLOCK DIAGRAM (1/2)

12

7-9

3, 4

1126

15

MOTORDRIVE

IC4201

+5VREGULATOR

IC601

PS304CN301

CN101

CN1301

CN1404

DR_SW12V DR_SW12VVoVCC

+8VREGULATOR

IC1351

1FB 2EN 4

6

BUFFERIC703

Q305SWITCH

P FAIL

SWITCHINGREGULATOR

IC1404

DR_SW5V DR_SW5V

11ATA-PCONT ATA_PCONT

1P-ON KEY0

UNSW6V

10 8.0V

5.0V5V_PD

14 3.3V

HB+

CN801

1UNSW12VA

FR_6V

FLD_PCONT

IT_3.3V

UNSW6V

FLD_PCONTLED_DIM

UNSW3.3V

DR_VCC8

CN602 CN361CN362

CN702

4 4 1

1

7LED_DIM

6

VBUS

VCCBLDCONLDEN

DR_VCC15

DR_VCC33

ATA_PCONT2

USB_VBUS_PCONT

PS301 UNSW6VUNSW6V

UNSW12V UNSW12V

3, 4

12

7-9

15CN2

11

1

3, 4 PS303

PS802

UNSW12V

LxVIN1

+1.5V/+3.3VREGULATOR

IC1280

7FB 9

LDOUT 2

8

ENLDO 5

VOUT 1

VIN21

L1287

R4218

DCSW

3.3V

DCSW3.3V SW3.3V

POWER

CONTROL

MC-10121F1_SW3.3VPCONT1

PCONT2

SW5VD

PCONT3

SWVIN

SW+3.3VREGULATOR

IC311

3FB 5EN 7

2

3.3V

L303

D308

+5VREGULATOR

IC70518

CN902

1

CN1402VCC

(IFCON FLASH WRITER)

(JIG)

6

+5V POWER

VBUS

+5V

+3.3V (HDMI)

CN420118

PCONT3PCONT3

SW5VD

PCONT1

+3.3VREGULATOR

IC704

SW+5VREGULATOR

IC304

PFAIL

+3.3V (AV)+3.3V

REGULATOR

IC802

UNSW3.3VUNSW+3.3VREGULATOR

IC301

DCSW5VDCSW5V

REGULATOR

IC302

-5VREGULATOR

IC806

+3.3VREGULATOR

IC805

LINE AMPIC807

VIDEOAMP

IC808

PCONT2

DLL/HDVDD_1.05VDLL+1.05V

REGULATOR

IC307

PLL_1.05VPLL+1.05V

REGULATOR

IC308

Q306, Q309B+ SWITCH

Q808, Q809B+ SWITCH

Q805, Q807B- SWITCH

FB303

HDMI OUT

EXT

USB-014 BOARD

BDDRIVE

5

Q813, Q815B- SWITCH

UNSW-9VA PS804

RESETIC809

3CN3

1

5

3 UNSW6VA PS803

D/ACONVERTER

IC804

POWER-2(SEE PAGE 3-6)

A


C


B

MB-127 BOARD (1/2)

1, 2

(AC IN)

CN331

CN1

1

FL-193 BOARD

1

S331I/1

05

3-6E

BDP-S360

3-6. POWER BLOCK DIAGRAM (2/2)

FL DRIVER

D703-D706RECT

Q706, Q707DC/DC

CONVERTER

Q1408FAN SPEEDCONTROL

IC702

REMOTE CONTROLRECEIVER

IC701

ND701FLUORESENT

INDICATORTUBE


USB I/F

IC101

DAOUT1VCCBLDCON

E3

SUB SYSTEMCONTROL

IC1403

PFAILPFAIL

45

PB3/SW4LDEN

E12GPIO57

USB_VBUS_PCONTF30

L701PS701CN701

FLD_PCONT

FR_6V

SW3.3

V

MC-1

0121

F1_S

W3.3

V

MC-10121F1_SW3.3V

DR_V

CC15

DDR2

_1.8V

+3.3V

(AV)

+3.3V

(HDM

I)

UNSW

3.3V

CORE

_1.05

V

DLL/H

DVDD

_1.05

V

DR_V

CC33

DR_VCC33

FB60

1

PLL_

1.05V

FB40

1

FB20

1FB

101

ETHERNETPHY

IC1101

DDR2_1.8V

DDR2SDRAM

IC104DDR2

SDRAM

IC105

16MS-FLASH

IC1245

F1, F2

VEE

LED B+

R720

D707

T701Q703, Q704B+ SWITCH

Q708, Q709B+ SWITCH

64MSDRAM

IC1251

SW5V

D

OPTICALTRANSMITTER

IC801L601

DDR2SDRAM

IC204DDR2

SDRAM

IC205

4M NORFLASHROM

IC5012G NAND

FLASHROM

IC502

KEY0KEY0

49

ATA_PCONT2ATA_PCONT2

32

FLD_PCONTFLD_PCONT

53

ATA_PCONT1ATA_PCONT

33

PCONT4PCONT4

31

PCONT3PCONT3

20

PCONT2PCONT2

21PCONT1

PCONT128

FAN_CONT0FAN_CONT0 58

7

3, 4

LED_DIM6

IT_3.3V1

FR-301 BOARD

Q301, Q302SWITCHING

Q307REGULATOR

CONTROLPCONT2

CORE

_1.05

V

DRVHV5DRV

MULTIREGULATOR

IC309

13DRVL 9VOUT 3

10

EN_PSV1

FAN_CONT0

FAN_CONT1FAN_CONT2

FAN_DET

V5FILT4

L304 L301

D301

VoutViv

FANCONTROL

IC1401

3CONT 2

ADJ 4

1CN1403

32 M1401

(FAN)

FB301

FB11

01

FB11

02

1

FL303, FL307, FL308

Q303, Q304SWITCHING

Q308REGULATOR

CONTROLPCONT4

DDR2

_1.8VDRVHV5DRV

MULTIREGULATOR

IC310

13DRVL 9VOUT 3

10

EN_PSV1

V5FILT4

L302FB302 FL304, FL305

MM

UNSW6V

UNSW12V

DCSW5V


C

POWER


A

CONTROL


B

MB-127 BOARD (2/2)



FAN_DETFAN_DET1 55

05

4-1

BDP-S360SECTION 4

SCHEMATIC DIAGRAMS

• All capacitors are in F unless otherwise noted. pF : F. 50V or less are not indicated except for electrolytics and tantalums.

• All resistors are in ohms, 1/4 W (Chip resistors : 1 /10 W) un-less otherwise specified.

k=1000, M=1000k.• % : indicates tolerance.• Caution when replacing chip parts. New parts must be attached after removal of chip. Be careful not to heat the minus side of tantalum capacitor, because

it is damaged by the heat.• Constants of resistors, capacitors, ICs and etc with XX indicate

that they are not used. In such cases, the unused circuits may be indicated.• All variable and adjustable resistors have characteristic curve B,

unless otherwise noted.• : nonflammable resistor• : fusible resistor• : panel designation• f : internal component.• : adjustment for repair.• : B+ Line• : B– Line• Circled numbers refer to waveforms.• Voltages are dc between measurement point.• Readings are taken with a color-bar signals on Blu-ray disc.• Readings are taken with a digital multimeter (DC 10M).• Voltage variations may be noted due to normal production toler-

ances.

Note: The components identified by mark or dotted line with mark are critical for safety.Replace only with part num-ber specified.

Note: Les composants identifiés par une marque sont critiquens pour la sécurité.Ne les remplacer que par une pièce portant le numéro spécifié.

When indicating parts by reference number, please include the board name.

4-1. THIS NOTE IS COMMON FOR SCHEMATIC DIAGRAMS

4-2

BDP-S360

4-2. FRAME SCHEMATIC DIAGRAM

:

:

:

BD DRIVESWITCHINGREGULATOR

AC IN

MB-127 BOARD

FAN

FR-301BOARD

FL-193 BOARD

USB-014BOARD

PF-139

CN3312P

CN1

CN2

CN3

HARNESS

FMF-003FFC

CN70117P

CN140417P

CN30115P

CN42615P

CN420118P

CN130145P

CN8015P

CN3625P

CN6025P

CN14033P

PM-156HARNESS

PM-157HARNESS

UV-005HARNESS

(SRV2183WW)

18

M

9

D

E

1110 152 5

K

3

I

17

05

F

1612

C

1 1986

G

14

A

13

H

L

74

J

B

4-3

BDP-S360

S331

1

2

2PCN331

SWITCH

2

FL-193 BOARD31

A

B

05

SWITCHINGREGULATOR

GND

P ON

/

4-3. FL-193 BOARD (SWITCH) SCHEMATIC DIAGRAM • See page 5-2 for printed wiring board.- Ref. No.: FL-193 board; 20,000 series -

4-4

BDP-S360

4-4. FR-301 BOARD (FL DRIVER) SCHEMATIC DIAGRAM • See page 5-3 for printed wiring board.- Ref. No.: FR-301 board; 20,000 series -

NO MARK:PB MODE

3.3

-18.

7

-18.

7

-18.

8

-18.

7

-18.

7

-18.

7

-18.

8

-18.

7

-21.2

-16.2

-21.4

-13.7

-21

-21

-21

-13.7

-9

-18.5

3.3

-18.

5

-11.

1

-21

-21

-20.

9

-11.

2

-11.

5

-13.

8

-13.

6

0

0

1.9

0.1

3

2.6

3.3

3.3

0.1

3.35.4

0

0

5.4

5.7 5.6

4.9

5.7 5.6

4.9

0

5.6

0

5.6

3.3

0.1

JL71

1

JL72

6

JL70

7

JL72

4

0.1C711

150pC717

0.1C713

JL71

5

2

3

5

6

8

7

1

10

4

9

T701

JL72

3

JL72

5

D7031SS355TE-17

JL70

6

D7061SS355TE-17

100kR715

JL72

2

JL71

0

JL71

4

JL73

0

JL71

3

JL701

JL70

5

16V100

C703

0.01C714

JL72

1

JL718

JL73

2

R716XX

D7041SS355TE-17

C7160.1

1

2

3

4

5

6

7

8

9

10

11

12 13 14 15 16 17 18 19 20 21 22

23

24

25

26

27

28

29

30

31

32

33

3435363738394041424344

IC702PT6315

LED1

LED2

LED3

LED4

OSC

DOUT

DIN

CLK

STB

K1

K2

VSS

VDD

SG1

SG2

SG3

SG4

SG5

SG6

SG7

SG8

SG9

SG10

SG11

SG12

SG13

SG14

SG15

SG16

VEE

GR12

GR11

GR10

GR

9

GR

8

GR

7

GR

6

GR

5

GR

4

GR

3

GR

2

GR

1

VDD

VSS

JL70

9

JL72

9

JL720

JL70

4

27kR714

JL71

6

JL70

8

3.9kR707

C7150.01

C705

250V6800p

JL717

XXC710

JL719

JL72

8

Q7072SC2411K-T-146-CR

50V22

C712

XXR706

JL702

JL70

3

XXC709

D7051SS355TE-17

JL71

2

D707MAZ8047GMLS0

JL72

7

Q7062SC2411K-T-146-CR

JL73

1

220R702

XXC708

0.01C707

S702

S701

S703

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

17PCN701

2SB1197K-T-146-RQ704

MUN2213T1Q703

10kR701

R704XX

C7010.1

1kR705

C702XX

L701100uH

ND701

1 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 31 322 4

16V

C70447

D701CL-270S-WS-SD-TS

2.2kR712

2.2kR713

D708CL-482S-HB8-SD-TS

220R717

2SB1197K-T-146-RQ709

MUN2213T1Q708

4.7kR718

2.2kR719

MUN2213T1Q711

MUN2213T1Q710

47R720

VCC

OU

T

GN

D

GP1UE27XK0VFIC701

150pC718

10kR721

0.4APS701

XXC719

XXC720

XXC721

SEG11

SEG

4

SEG10

SEG

3

SEG

2

SEG

1

GR

D8

GR

D7

GR

D6

GR

D5

GR

D4

GR

D3

GR

D2

GR

D1

SEG16

SEG

9

SEG15

SEG

8

SEG14

SEG

7

SEG13

SEG

6

SEG12

SEG

5

LED_CK

FLD_STB

GR

D1

GR

D2

GR

D3

GR

D4

GR

D5

GR

D6

GR

D7

GR

D8

GR

D11

GR

D12 SE

G16

SEG

15

SEG

14

SEG

13

SEG

12

SEG

11

SEG

10

SEG

8

SEG

7

SEG

6

SEG

5

SEG

4

SEG

3

SEG

2

SEG

1

LED_DT

LED_CK

SEG

9

FLD_STB

LED_DT

GRD11

GRD12

IT_3.3V

GND

FR_6V

FR_6V

GND

LED_DIM

FLD_PCONT

LED_DT

LED_CK

FLD_STB

NC

KEY 1

KEY 2

KEY 3

GND

SIRCS

GND(WHITE)(BLUE)

IC701REMOTE CONTROL

CN1404

MB-127

(14/14)

(SEE PAGE 4-18)

BOARD

FL DRIVER

9

D

E

11102 5

FR-301 BOARD3

F

12

C

1 86

XX MARK:NO MOUNT

G

A

H

74

B

I

RECEIVER

TRANSFORMERDC-DC CONVERTER

FL DRIVER

IC702

FLUORESCENT INDICATOR TUBE

B+ SWITCHQ703, Q704

LED DRIVEQ710, Q711

05

72V

Q708, Q709B+ SWITCH

D701, D708(BLU-RAY DISC INDICATOR)

Q706, Q707DC/DC CONVERTER



4-5

BDP-S360

4-5. MB-127 BOARD (MC10121F1 DDR2-A) SCHEMATIC DIAGRAM (1/14) • See page 5-5 for printed wiring board.- Ref. No.: MB-127 board; 10,000 series -

DDR2_1.8V

GND

XXC138

XXC140

XXC143

0.001C145

XXC142

0.001C147

0.001C149

XXC151

0.001C120

XXC129

XXC124

0.001C133

0.001C125

0.001C122

XXC127

XXC131

XXC121

XXC123

XXC126

0.001C128

0.001C132

0.001C130

0.001C134

0.001C139

0.001C141

0.001C152

XXC150

0.001C146

XXC148

0.001C144

0.1C102

1C119

0.1C136

XXR126

1C137

0.1C154

R122XX

JL1005

JL1006

JL1007

JL1008

JL1009

JL1010

JL1011

JL1012

JL1013

JL1014

JL1015

JL1016

JL1017

JL1018

JL1019

JL1020

JL174

JL175

JL176

JL177

JL178

JL179

JL180

JL181

JL182

JL183

JL184

JL185

JL186

JL187

JL188

JL189

JL190

JL191

JL192

JL193

JL194

JL195

JL196

JL197

JL198

JL199

JL1001

JL1002

JL1003

JL1004

JL117

JL118

JL119

JL120

JL121

JL122

JL123

JL124

JL125

JL126

JL127

JL128

JL129

JL130

JL131

JL132

JL133

JL134

JL135

JL136

JL137

JL138

JL139

JL140

JL141

JL142

JL143

JL144

JL145

JL146

JL147

JL148

JL149

JL150

JL151

JL152

JL153

JL154

JL155

JL156

JL157

JL158

JL159

JL160

JL161

JL162

JL101

1kR104

0.5%

1kR103

0.5%

0.1C115

1kR124

0.5%

1kR123

0.5%

R1271k

0.5%

R1281k

0.5%

100R125

DLL/HDVDD_1.05V

0.1C116

0.1C117

0.1C118

R106XX

R105XX

R107XX

10C135

10C153

RB10439

RB10339

RB10239

RB10139

JL163 JL1021

JL107

JL108

JL109

JL110

JL111

JL112

JL113

JL114

JL115

JL116 JL173

JL167

JL166

JL172

JL165

JL169

JL171

JL164

JL170

JL168

JL105

JL104

JL103

JL102

JL106

XXC101

100R121

R101XX

0.001C113

XXC172

0.01C155

XXC156

0.01C158

0.01C157

XXC160

0.01C159

XXC162

C1631

XXC164

0.01C161

1C165

1C166

0.01C170

C1681

XXC167

XXC169

XXC173

XXC171

C114XX

0.001C105

0.001C112

XXC104

XXC111

0.001C103

0.001C110

0.001C109

XXC108

0.001C107

0.001C106

RB10539

150R110

10R118

10R117

150R109

10R115

150R108

150R111

10R116

JL1022

JL1023

JL1024

JL1025

JL1026

JL1027

JL1028

JL1029

JL1030

JL1031

JL1032

JL1033

JL1034

JL1035

JL1036

JL1037

JL1038

JL1039

JL1040

JL1041

JL1042

JL1043

JL1044

JL1045

JL1046

JL1047

JL1048

JL1049

JL1050

JL1051

JL1052

JL1053

JL1054

JL1055

JL1056

JL1057

JL1058

JL1059

JL1060

JL1061

EMI

FL101XX

IC107XX

M8

M3

M7

N2

N8

N3

N7

P2

P8

P3

M2

P7

R2

L2

L3

L1

B3

B7

A8

F3

F7

E8

J8

K8

K2

L8

K7

L7

K3

K9

A3

E3

J3

N1

P9

A7

B2

B8

D2

D8

E7

F2

F8

H2

H8

G8

G2

H7

H3

H1

H9

F1

F9

C8

C2

D7

D3

D1

D9

B1

B9

A2

E2

R3

R7

R8

J2

J1

J7

A1

E1

J9

M9

R1

A9

C1

C3

C7

C9

E9

G1

G3

G7

G9

IC106XX

M8

M3

M7

N2

N8

N3

N7

P2

P8

P3

M2

P7

R2

L2

L3

L1

B3

B7

A8

F3

F7

E8

J8

K8

K2

L8

K7

L7

K3

K9

A3

E3

J3

N1

P9

A7

B2

B8

D2

D8

E7

F2

F8

H2

H8

G8

G2

H7

H3

H1

H9

F1

F9

C8

C2

D7

D3

D1

D9

B1

B9

A2

E2

R3

R7

R8

J2

J1

J7

A1

E1

J9

M9

R1

A9

C1

C3

C7

C9

E9

G1

G3

G7

G9

JL1062

JL1063

JL1064

JL1065

JL1066

JL1067

JL1068

JL1069

JL1070

JL1071

JL1072

JL1073

JL1074

JL1075

JL1076

JL1077

JL1078

JL1079

JL1080

JL1081

JL1082

C1740.1

FB101

MC-10121F1-207-TA1-AIC101

D0VDD10V9

D0VDD10Y9

D0VDD10AD9

D0VDD10AF9

VDD18T4

VDD18T7

VDD18U8

VDD18W8

VDD18W9

VDD18Y8

VDD18AA5

VDD18AB4

VDD18AC3

VDD18AD1

VDD18AD2

VDD18AE8

VDD18AE9

VDD18AF8

VDD18AG9

VDD18AG11

VDD18AH8

VDD18AH10

VDD18AJ7

VDD18AJ9

VDD18AK8

VDD18AL7

VDD18AM6

VDD18AN5

GNDT3

GNDT6

GNDU1

GNDU2

GNDU5

GNDU9

GNDV3

GNDV5

GNDV8

GNDW1

GNDW2

GNDW4

GNDY3

GNDY5

GNDAA1

GNDAA2

GNDAA8

GNDAA9

GNDAB3

GNDAB8

GNDAC1

GNDAC2

GNDAC4

GNDAC8

GNDAC9

GNDAD8

GNDAE7

GNDAF3

GNDAF6

GNDAG1

GNDAG2

GNDAG8

GNDAG10

GNDAG12

GNDAH3

GNDAH7

GNDAH9

GNDAH11

GNDAJ1

GNDAJ2

GNDAJ8

GNDAJ10

GNDAK3

GNDAK7

GNDAK9

GNDAL1

GNDAL2

GNDAL8

GNDAM3

GNDAM7

GNDAN2

GNDAN4

GNDAN6

GNDAP3

GNDAP5

D0VREFAB9

D0DQ0W7

D0DQ1W5

D0DQ2Y6

D0DQ3W6

D0DQ4AA4

D0DQ5Y7

D0DQ6AA6

D0DQ7AA3

D0DQ8U7

D0DQ9T5

D0DQ10U3

D0DQ11U6

D0DQ12V6

D0DQ13V4

D0DQ14V7

D0DQ15W3

D0DM0Y4

D0DQS0AB1

D0DQS0BAB2

D0DM1U4

D0DQS1V1

D0DQS1BV2

D0CLK0Y2

D0CLK0BY1

D0CS0BAG4

D0DQ16AJ4

D0DQ17AK6

D0DQ18AJ3

D0DQ19AJ6

D0DQ20AH6

D0DQ21AH4

D0DQ22AG6

D0DQ23AH5

D0DQ24AL4

D0DQ25AM5

D0DQ26AL3

D0DQ27AN3

D0DQ28AK5

D0DQ29AL6

D0DQ30AJ5

D0DQ31AL5

D0DM2AK4

D0DQS2AH1

D0DQS2BAH2

D0DM3AM4

D0DQS3AM1

D0DQS3BAM2

D0CLK1AK2

D0CLK1BAK1

D0CKERSTBAB6

D0CS1BAF4

D0ADD0AE6

D0ADD1AD4

D0ADD2AG3

D0ADD3AE3

D0ADD4AD6

D0ADD5AE4

D0ADD6AD5

D0ADD7AC5

D0ADD8AF2

D0ADD9AE2

D0ADD10AB7

D0ADD11AE5

D0ADD12AC7

D0ADD13AF1

D0ADD14AC6

D0ADD15AG7

D0BA0AE1

D0BA1AD3

D0CKEAB5

D0RASBAG5

D0CASBAD7

D0WEBAA7

D0ODT0AF7

D0ODT1AF5

IC103

M8

M3

M7

N2

N8

N3

N7

P2

P8

P3

M2

P7

R2

L2

L3

L1

B3

B7

A8

F3

F7

E8

J8

K8

K2

L8

K7

L7

K3

K9

A3

E3

J3

N1

P9

A7

B2

B8

D2

D8

E7

F2

F8

H2

H8

DQ0 G8

DQ1 G2

DQ2 H7

DQ3 H3

DQ4 H1

DQ5 H9

DQ6 F1

DQ7 F9

DQ8 C8

DQ9 C2

DQ10 D7

DQ11 D3

DQ12 D1

DQ13 D9

DQ14 B1

DQ15 B9

NC A2

NC E2

NC R3

NC R7

NC R8

VREF J2

VDDL J1

VSSDL J7

VDD A1

VDD E1

VDD J9

VDD M9

VDD R1

VDDQ A9

VDDQ C1

VDDQ C3

VDDQ C7

VDDQ C9

VDDQ E9

VDDQ G1

VDDQ G3

VDDQ G7

VDDQ G9

IC102

A0M8

A1M3

A2M7

A3N2

A4N8

A5N3

A6N7

A7P2

A8P8

A9P3

A10M2

A11P7

A12R2

BA0L2

BA1L3

BA2L1

UDMB3

UDQSB7

/UDQSA8

LDMF3

LDQSF7

/LDQSE8

CKJ8

/CKK8

CKEK2

/CSL8

/RASK7

/CASL7

/WEK3

ODTK9

VSSA3

VSSE3

VSSJ3

VSSN1

VSSP9

VSSQA7

VSSQB2

VSSQB8

VSSQD2

VSSQD8

VSSQE7

VSSQF2

VSSQF8

VSSQH2

VSSQH8

DQ0 G8

DQ1 G2

DQ2 H7

DQ3 H3

DQ4 H1

DQ5 H9

DQ6 F1

DQ7 F9

DQ8 C8

DQ9 C2

DQ10 D7

DQ11 D3

DQ12 D1

DQ13 D9

DQ14 B1

DQ15 B9

NC A2

NC E2

NC R3

NC R7

NC R8

VREF J2

VDDL J1

VSSDL J7

VDD A1

VDD E1

VDD J9

VDD M9

VDD R1

VDDQ A9

VDDQ C1

VDDQ C3

VDDQ C7

VDDQ C9

VDDQ E9

VDDQ G1

VDDQ G3

VDDQ G7

VDDQ G9

K4T1G164QE-HCE7TIC104

XX

M8

M3

M7

N2

N8

N3

N7

P2

P8

P3

M2

P7

R2

L2

L3

L1

B3

B7

A8

F3

F7

E8

J8

K8

K2

L8

K7

L7

K3

K9

A3

E3

J3

N1

P9

A7

B2

B8

D2

D8

E7

F2

F8

H2

H8

G8

G2

H7

H3

H1

H9

F1

F9

C8

C2

D7

D3

D1

D9

B1

B9

A2

E2

R3

R7

R8

J2

J1

J7

A1

E1

J9

M9

R1

A9

C1

C3

C7

C9

E9

G1

G3

G7

G9


XX

A0M8

A1M3

A2M7

A3N2

A4N8

A5N3

A6N7

A7P2

A8P8

A9P3

A10M2

A11P7

A12R2

BA0L2

BA1L3

BA2L1

UDMB3

UDQSB7

/UDQSA8

LDMF3

LDQSF7

/LDQSE8

CKJ8

/CKK8

CKEK2

/CSL8

/RASK7

/CASL7

/WEK3

ODTK9

VSSA3

VSSE3

VSSJ3

VSSN1

VSSP9

VSSQA7

VSSQB2

VSSQB8

VSSQD2

VSSQD8

VSSQE7

VSSQF2

VSSQF8

VSSQH2

VSSQH8

G8

G2

H7

H3

H1

H9

F1

F9

C8

C2

D7

D3

D1

D9

B1

B9

A2

E2

R3

R7

R8

J2

J1

J7

A1

E1

J9

M9

R1

A9

C1

C3

C7

C9

E9

G1

G3

G7

G9

E

PT001

D0BA1

D0BA0

D0A15

D0A14

D0A12

D0A11

D0A10

D0A9

D0A8

D0A7

D0A6

D0A5

D0A4

D0A3

D0A2

D0A1

D0A0

D0DQSB2

D0DQS2

D0DQSB3

D0DQS3

D0DQ31

D0DQ30

D0DQ29

D0DQ28

D0DQ16

D0DQ17

D0DQ19

D0DQ20

D0DQ21

D0DQ22

D0DQ23

D0DQ24

D0DQ25

D0DQ27

D0DQ26

D0CK1

D0CKB1

D0CKE

D0RAS

D0CAS

D0WE

D0CK0

D0DM1

D0DQSB0

D0DQS0

D0DM0

D0DQ15

D0DQ3

D0DQ4

D0DQ5

D0DQ7

D0DQ9

D0DQ10

D0DQ11

D0DQ14

D0DQ6

D0DQSB1

D0DQ12

D0DQ13

D0CKB0

D0DQ18

D0DQS1

D0ODT0

D0BA2

D0DM2

D0DM3

D0DQ8

D0MA0

D0MA1

D0MA2

D0MA3

D0MA4

D0MA5

D0MA6

D0MA7

D0MA8

D0MA9

D0MA10

D0MA11

D0MA12

D0MBA0

D0MBA1

D0MBA2

D0DM1

D0DQS1

D0DQSB1

D0DM0

D0DQS0

D0DQSB0

D0MCKE

D0MCS0

D0MRAS

D0MCAS

D0MWE

D0MODT0

D0MA0

D0MA1

D0MA2

D0MA3

D0MA14

D0MA15

D0MA6

D0MA7

D0MA8

D0MA9

D0MA10

D0MA11

D0MA12

D0MBA0

D0MBA1

D0MBA2

D0DM3

D0DQS3

D0DQSB3

D0DM2

D0DQS2

D0DQSB2

D0MCKE

D0MCS0

D0MRAS

D0MCAS

D0MWE

D0MODT0

D0MCK0

D0MCKB0

D0ODT0

D0RAS

D0CAS

D0CS0

D0MODT0

D0MRAS

D0MCAS

D0MCS0

D0A10

D0A3

D0A7

D0A9

D0MA10

D0MA7

D0MA9

D0MA3

D0BA0

D0BA2

D0MBA0

D0MBA2

D0MCKED0CKE

D0WE D0MWE

D0A8

D0A6

D0A11

D0MA12

D0MA8

D0MA11

D0MA6

D0A0

D0A2

D0A1

D0BA1

D0MA0

D0MA2

D0MA1

D0MBA1

D0MCK0

D0MCKB0

D0MCK1

D0MCKB1

D0A5

D0A4

D0A15

D0MA4

D0MA5

D0MA15

D0CK0

D0CKB0

D0CK1

D0CKB1

D0MA14D0A14

D0DQ0

D0DQ1

D0DQ2

D0DQ3

D0DQ4

D0DQ5

D0DQ6

D0DQ7

D0DQ8

D0DQ9

D0DQ10

D0DQ11

D0DQ12

D0DQ13

D0DQ14

D0DQ15

D0DQ16

D0DQ17

D0DQ18

D0DQ19

D0DQ20

D0DQ21

D0DQ22

D0DQ23

D0DQ24

D0DQ25

D0DQ26

D0DQ27

D0DQ28

D0DQ29

D0DQ30

D0DQ31

D0CS0

D0DQ0

D0DQ1

D0DQ2

D0A12

D0MCK1

D0MCKB1

A/V OUT, HDMI, ETHERNET I/F, USB I/F

IC101MAIN SYSTEM CONTROL, DSP, SATA I/F, MEMORY CONTROL,

(1/15)

DDR2 SDRAM

IC104 IC105DDR2 SDRAM

M

MC10121F1 DDR2-A

9

D

E

1110 152 5

MB-127 BOARD (1/14)

K

3

I

17

05

F

1612

C

1 86

XX MARK:NO MOUNT

G

14

A

13

H

L

74

J

B

18

MB-127(3/14)

4-6

BDP-S360

4-6. MB-127 BOARD (MC10121F1 DDR2-B) SCHEMATIC DIAGRAM (2/14) • See page 5-5 for printed wiring board.- Ref. No.: MB-127 board; 10,000 series -

0.001C207

0.001C214

JL223

JL284

0.001C231

JL244

DDR2_1.8V

JL2018

1kR230

0.5%

JL218

0.001C227

JL279

1kR226

0.5%

JL239

JL2013

XXC243

JL2001

JL260

JL274

XXC253

JL234

0.1C206

JL2008

JL295

JL255

XXC226

JL229

JL290

0.001C223

JL250

GND

JL224

JL285

JL245

XXC244

JL2019

0.001C212

JL219

1C240

JL280

0.001C234

JL240

JL2014

XXR224

JL2002

JL261

XXC252

JL275

JL235

JL2009

XXR228

JL296

JL256

0.1C202

0.001C237

JL230

XXC210

JL291

JL251

0.001C225

JL225

JL286

0.001C245

JL246

JL2020

1kR204

0.5%

JL220

0.001C247

0.1C239

0.1C205

JL281

JL241

JL2015

0.001C235

JL2003

1kR203

0.5%

0.001C208

JL262

JL276

XXC236

JL236

JL2010

JL297

JL257

0.001C246

JL231

JL2005

0.001C249

JL292

0.1C203

JL252

JL226

XXC229

JL287

JL247

0.001C232

JL201

JL221

1kR229

0.5%

JL282

0.001C241

JL242

JL2016

JL2004

0.001C255

0.001C213 JL277

JL237

JL2011

1kR225

0.5%

XXC224

JL298

JL258

JL232

XXC254

JL2006

JL293

JL253

10R217

0.1C204

JL227

XXC242

JL288

JL248

0.001C211

1C222

JL222

XXC230

JL283

JL243

0.1C257

JL2017

XXC250

JL217

JL278

JL238

0.001C216

JL2012

JL299

JL259

XXC233

XXC209

JL233

JL2007

XXC228

JL294

JL254

JL228

0.001C248

JL289

JL249

0.001C251

DLL/HDVDD_1.05V

R205XX

R206XX

R207150

0.5% R208150

0.5%

XXR209

10C238

10C256

JL204

JL205

JL203

JL206

JL202

JL216

JL210

JL209

JL215

JL208

JL212

JL214

JL207

JL213

JL211 JL268

JL270

JL271

JL273

JL267

JL265

JL264

JL269

JL272

JL266

JL263 JL2021

XXC201

150R211

150R210

150R213

150R212

10R218

10R219

10R220

100R223

100R227

R201XX

XXC220

C2701

XXC273

0.01C263

XXC269

0.01C258

0.01C262

1C267

XXC271

XXC259

XXC264

1C268

XXC274

0.01C261

C2651

XXC260

XXC266

XXC272

XXC221

C2150.001

XXC217

XXC218

XXC219

XXC275

RB20539

RB20239

RB20339

RB20439

RB20139

0.01C276

0.01C277

JL2022

JL2023

JL2024

JL2025

JL2026

JL2027

JL2028

JL2029

JL2030

JL2031

JL2032

JL2033

JL2034

JL2035

JL2036

JL2037

JL2038

JL2039

JL2040

JL2041

JL2042

JL2043

JL2044

JL2045

JL2046

JL2047

JL2048

JL2049

JL2050

JL2051

JL2052

JL2053

JL2054

JL2055

JL2056

JL2057

JL2058

JL2059

JL2060

JL2061

EMI

FL201XX

IC206XX

M8

M3

M7

N2

N8

N3

N7

P2

P8

P3

M2

P7

R2

L2

L3

L1

B3

B7

A8

F3

F7

E8

J8

K8

K2

L8

K7

L7

K3

K9

A3

E3

J3

N1

P9

A7

B2

B8

D2

D8

E7

F2

F8

H2

H8

G8

G2

H7

H3

H1

H9

F1

F9

C8

C2

D7

D3

D1

D9

B1

B9

A2

E2

R3

R7

R8

J2

J1

J7

A1

E1

J9

M9

R1

A9

C1

C3

C7

C9

E9

G1

G3

G7

G9

IC207XX

M8

M3

M7

N2

N8

N3

N7

P2

P8

P3

M2

P7

R2

L2

L3

L1

B3

B7

A8

F3

F7

E8

J8

K8

K2

L8

K7

L7

K3

K9

A3

E3

J3

N1

P9

A7

B2

B8

D2

D8

E7

F2

F8

H2

H8

G8

G2

H7

H3

H1

H9

F1

F9

C8

C2

D7

D3

D1

D9

B1

B9

A2

E2

R3

R7

R8

J2

J1

J7

A1

E1

J9

M9

R1

A9

C1

C3

C7

C9

E9

G1

G3

G7

G9

JL2062

JL2063

JL2064

JL2065

JL2066

JL2067

JL2068

JL2069

JL2070

JL2071

JL2072

JL2073

JL2074

JL2075

JL2076

JL2077

JL2078

JL2079

JL2080

JL2081

JL2082

JL2083

JL2084

JL2085

JL2086

C2780.1

FB201

MC-10121F1-207-TA1-AIC101

D1VDD10AG13

D1VDD10AG15

D1VDD10AG19

D1VDD10AG21

VDD18AG14

VDD18AG20

VDD18AH12

VDD18AH13

VDD18AH14

VDD18AH19

VDD18AH20

VDD18AJ11

VDD18AJ13

VDD18AJ18

VDD18AJ21

VDD18AJ22

VDD18AK13

VDD18AK14

VDD18AK17

VDD18AK20

VDD18AK22

VDD18AK23

VDD18AK24

VDD18AM12

VDD18AM23

VDD18AN11

VDD18AN22

VDD18AN28

VDD18AP10

VDD18AP16

VDD18AP21

VDD18AP29

VDD18AR10

VDD18AR15

VDD18AR21

VDD18AR29

GNDAG16

GNDAG18

GNDAG22

GNDAH15

GNDAH16

GNDAH17

GNDAH18

GNDAH21

GNDAH22

GNDAJ12

GNDAJ14

GNDAJ17

GNDAJ19

GNDAJ20

GNDAK12

GNDAK15

GNDAK16

GNDAK21

GNDAK25

GNDAL15

GNDAL26

GNDAM18

GNDAM27

GNDAN8

GNDAN12

GNDAN19

GNDAN23

GNDAN25

GNDAN27

GNDAP7

GNDAP9

GNDAP11

GNDAP15

GNDAP20

GNDAP22

GNDAP24

GNDAP26

GNDAP28

GNDAR5

GNDAR7

GNDAR9

GNDAR16

GNDAR22

GNDAR24

GNDAR26

GNDAR28

D1RQ0AJ16

D1RQ1AJ15

D1VREFAG17

D1DQ0AL21

D1DQ1AL20

D1DQ2AM22

D1DQ3AM21

D1DQ4AN21

D1DQ5AR20

D1DQ6AN20

D1DQ7AR19

D1DQ8AM24

D1DQ9AL25

D1DQ10AL23

D1DQ11AL24

D1DQ12AN24

D1DQ13AM25

D1DQ14AL22

D1DQ15AN26

D1DM0AM20

D1DQS0AR23

D1DQS0BAP23

D1DM1AM26

D1DQS1AR27

D1DQS1BAP27

D1CLK0AP25

D1CLK0BAR25

D1CS0BAP13

D1DQ16AL12

D1DQ17AN10

D1DQ18AM10

D1DQ19AR11

D1DQ20AL13

D1DQ21AL14

D1DQ22AM11

D1DQ23AM14

D1DQ24AK10

D1DQ25AK11

D1DQ26AL9

D1DQ27AL10

D1DQ28AM8

D1DQ29AN9

D1DQ30AN7

D1DQ31AL11

D1DM2AM13

D1DQS2AR8

D1DQS2BAP8

D1DM3AM9

D1DQS3AR4

D1DQS3BAP4

D1CLK1AP6

D1CLK1BAR6

D1CKERSTBAN18

D1CS1BAM15

D1ADD0AN15

D1ADD1AK19

D1ADD2AN14

D1ADD3AP19

D1ADD4AL16

D1ADD5AR17

D1ADD6AL17

D1ADD7AN16

D1ADD8AP17

D1ADD9AK18

D1ADD10AP18

D1ADD11AR14

D1ADD12AM17

D1ADD13AN17

D1ADD14AM16

D1ADD15AN13

D1BA0AR18

D1BA1AL19

D1CKEAM19

D1RASBAP12

D1CASBAP14

D1WEBAL18

D1ODT0AR12

D1ODT1AR13

IC202

A0M8

A1M3

A2M7

A3N2

A4N8

A5N3

A6N7

A7P2

A8P8

A9P3

A10M2

A11P7

A12R2

BA0L2

BA1L3

BA2L1

UDMB3

UDQSB7

/UDQSA8

LDMF3

LDQSF7

/LDQSE8

CKJ8

/CKK8

CKEK2

/CSL8

/RASK7

/CASL7

/WEK3

ODTK9

VSSA3

VSSE3

VSSJ3

VSSN1

VSSP9

VSSQA7

VSSQB2

VSSQB8

VSSQD2

VSSQD8

VSSQE7

VSSQF2

VSSQF8

VSSQH2

VSSQH8

DQ0 G8

DQ1 G2

DQ2 H7

DQ3 H3

DQ4 H1

DQ5 H9

DQ6 F1

DQ7 F9

DQ8 C8

DQ9 C2

DQ10 D7

DQ11 D3

DQ12 D1

DQ13 D9

DQ14 B1

DQ15 B9

NC A2

NC E2

NC R3

NC R7

NC R8

VREF J2

VDDL J1

VSSDL J7

VDD A1

VDD E1

VDD J9

VDD M9

VDD R1

VDDQ A9

VDDQ C1

VDDQ C3

VDDQ C7

VDDQ C9

VDDQ E9

VDDQ G1

VDDQ G3

VDDQ G7

VDDQ G9


XX

M8

M3

M7

N2

N8

N3

N7

P2

P8

P3

M2

P7

R2

L2

L3

L1

B3

B7

A8

F3

F7

E8

J8

K8

K2

L8

K7

L7

K3

K9

A3

E3

J3

N1

P9

A7

B2

B8

D2

D8

E7

F2

F8

H2

H8

G8

G2

H7

H3

H1

H9

F1

F9

C8

C2

D7

D3

D1

D9

B1

B9

A2

E2

R3

R7

R8

J2

J1

J7

A1

E1

J9

M9

R1

A9

C1

C3

C7

C9

E9

G1

G3

G7

G9

IC203

M8

M3

M7

N2

N8

N3

N7

P2

P8

P3

M2

P7

R2

L2

L3

L1

B3

B7

A8

F3

F7

E8

J8

K8

K2

L8

K7

L7

K3

K9

A3

E3

J3

N1

P9

A7

B2

B8

D2

D8

E7

F2

F8

H2

H8

DQ0 G8

DQ1 G2

DQ2 H7

DQ3 H3

DQ4 H1

DQ5 H9

DQ6 F1

DQ7 F9

DQ8 C8

DQ9 C2

DQ10 D7

DQ11 D3

DQ12 D1

DQ13 D9

DQ14 B1

DQ15 B9

NC A2

NC E2

NC R3

NC R7

NC R8

VREF J2

VDDL J1

VSSDL J7

VDD A1

VDD E1

VDD J9

VDD M9

VDD R1

VDDQ A9

VDDQ C1

VDDQ C3

VDDQ C7

VDDQ C9

VDDQ E9

VDDQ G1

VDDQ G3

VDDQ G7

VDDQ G9


XX

A0M8

A1M3

A2M7

A3N2

A4N8

A5N3

A6N7

A7P2

A8P8

A9P3

A10M2

A11P7

A12R2

BA0L2

BA1L3

BA2L1

UDMB3

UDQSB7

/UDQSA8

LDMF3

LDQSF7

/LDQSE8

CKJ8

/CKK8

CKEK2

/CSL8

/RASK7

/CASL7

/WEK3

ODTK9

VSSA3

VSSE3

VSSJ3

VSSN1

VSSP9

VSSQA7

VSSQB2

VSSQB8

VSSQD2

VSSQD8

VSSQE7

VSSQF2

VSSQF8

VSSQH2

VSSQH8

G8

G2

H7

H3

H1

H9

F1

F9

C8

C2

D7

D3

D1

D9

B1

B9

A2

E2

R3

R7

R8

J2

J1

J7

A1

E1

J9

M9

R1

A9

C1

C3

C7

C9

E9

G1

G3

G7

G9

D1DQ2

D1DQ31

D1DQ1

D1DM2

D1DQ0

D1DQ15

D1A0

D1DM0

D1A1

D1A3

D1DM3

D1DM1

D1A4

D1A5

D1A6

D1A7

D1A8

D1A9

D1A10

D1DQ26

D1A11

D1DQ27

D1A12

D1DQ25

D1DQ14

D1A14

D1DQ24

D1DQ13

D1A15

D1DQ23

D1DQ12

D1BA0

D1DQ22

D1DQ11

D1BA1

D1DQ21

D1DQ10

D1DQ20

D1DQ9

D1DQ19

D1DQ8

D1DQ18

D1DQ7

D1DQ17

D1DQ6

D1DQ16

D1DQ5

D1DQ28

D1DQ4

D1DQ29

D1DQ3

D1DQ30

D1CK0

D1CKB0

D1CK1

D1CKB1

D1CKE

D1RAS

D1CAS

D1WE

D1ODT0

D1DQS0

D1DQSB0

D1DQS1

D1DQSB1

D1DQS2

D1DQSB2

D1DQS3

D1DQSB3

D1CS0

D1BA2

D1A2

D1MA0

D1MA1

D1MA2

D1MA3

D1MA4

D1MA5

D1MA6

D1MA7

D1MA8

D1MA9

D1MA10

D1MA11

D1MA12

D1MBA0

D1MBA1

D1MBA2

D1DM1

D1DQS1

D1DQSB1

D1DM0

D1DQS0

D1DQSB0

D1MCS0

D1MRAS

D1MCAS

D1MWE

D1MCKE

D1MA0

D1MA1

D1MA2

D1MA3

D1MA14

D1MA15

D1MA6

D1MA7

D1MA8

D1MA9

D1MA10

D1MA11

D1MA12

D1MBA0

D1MBA1

D1MBA2

D1DM3

D1DQS3

D1DQSB3

D1MCKE

D1MCS0

D1MRAS

D1MCAS

D1MWE

D1MODT0

D1DM2

D1DQS2

D1DQSB2

D1MCK1

D1MCKB1

D1MCK0

D1MCKB0

D1MODT0

D1BA2

D1MA6

D1MA14

D1MWE

D1A7

D1BA0

D1MBA1

D1MA12

D1MCK1

D1CS0

D1MCK0

D1MA10

D1MA7

D1A3

D1CKB1

D1MCAS

D1A1

D1MA11

D1MBA0

D1MA1

D1MBA2

D1CK1

D1MRAS

D1A6

D1BA1

D1A11

D1CKB0

D1CAS

D1CK0

D1MA8

D1MA2

D1MA15

D1MCS0

D1A5

D1A8

D1MA3

D1MA5

D1CKE

D1RAS

D1A10

D1A9

D1A2

D1MCKB0

D1MCKB1

D1A15

D1MA0

D1WE

D1MCKE

D1A14

D1A0

D1MA9

D1DQ14

D1DQ13

D1DQ12

D1DQ11

D1DQ10

D1DQ9

D1DQ8

D1DQ7

D1DQ6

D1DQ5

D1DQ4

D1DQ3

D1DQ2

D1DQ1

D1DQ0 D1DQ16

D1DQ17

D1DQ18

D1DQ19

D1DQ20

D1DQ21

D1DQ22

D1DQ23

D1DQ24

D1DQ25

D1DQ26

D1DQ27

D1DQ28

D1DQ29

D1DQ30

D1DQ31

D1A4

D1A12

D1ODT0 D1MODT0

D1MA4

D1DQ15

(2/15)MAIN SYSTEM CONTROL, DSP, SATA I/F, MEMORY CONTROL,

IC101A/V OUT, HDMI, ETHERNET I/F, USB I/F

IC204DDR2 SDRAM DDR2 SDRAM

IC205

14

G

XX MARK:NO MOUNT

6 81

C

12 16

F

05

17

I

3

K

MB-127 BOARD (2/14)52 1510 11

E

D

9

MC10121F1 DDR2-B

M

18

B

J

4 7

L

H

13

A

(3/14)MB-127

4-7

BDP-S360

4-7. MB-127 BOARD (POWER1) SCHEMATIC DIAGRAM (3/14) • See page 5-5 for printed wiring board.- Ref. No.: MB-127 board; 10,000 series -

NO MARK:PB MODE

5.7

3.3

5.7

3.3

12.3

8.2

0.8

0.9

3.3

3.5

5 5.7

3.2

0.1

3.3 0.1

3.3

0.1

3.3 3.3

0 5

03.2

5.7 1.9

1.1

1.1

1.1

1.1

1.9

5.3

0

5

3.8

4.2

1.1

1

5

0.6

4.20

3.2 0

12.3 2.4

1.8

1.8

1.8

5

5

1.8

1.8

0.6 5

4

0

6.1

2.4

1.8

1.8

4

1.8

1.8

1.8

12.3

12.3

12.3

5.7

5.7

5.7

1.1

1.1

1.1

1.1

3.8

3.3

3.2

1

1

3.2

3.3

3.3

1.3

5.7

5

M1FM3D301

0.5%

R3251k

DDR2_1.8V

KDZTR3.9BD304

R335XX

0.5%

R319150k

D302XX

330R345

R3493.3k0.5%

0.1C357

C36

4XX

0.1C358

R31

715

k0.

5%

KDZT

R3.

9BD

303

1C352

4V330

C362

8 7 6 5

4321S1 S2 S3 G

D1D2D3D4

RSS100N03TBQ302

8 7 6 5

4321S1 S2 S3 G

D1D2D3D4

RSS100N03TBQ304

4.7C355

22C

366

R3571k

R3521k

EMIG

FL303

R302XX

R3031k

PLL_1.05V

5 4

321

TK11150CSCL-GIC304

0.22C316

XXC319

0.01C315

R3011k

0.22C313

XXC311

SW5VD

5

43

2

1

IC303XX

XXC312

XXC314

XXC

320

XXC

317

8 7 6 5

4321S1 S2 S3 G

D1D2D3D4

Q300XX

EMIG

FL308

EMIG

FL307

CORE_1.05V

MC-10121F1_SW3.3V

C342XX

10C306

10C302

10C301

10C305

R367XX

R3091k

XXC374

XXC375

XXC377

XXC308

XXC307

XXC309

XXC310

XXC318

2.2uHL302

C325XX 22

C376330

R364

MAZ8047G0LS0D308

330R356

330R363

R3051k

UNSW3.3V

XXC378

XXC326

XXR306

4.7C329

XXC340

0.5%10k

R355C333XX 1

C328

10uHL303

XXC327

1kR338

DR_SW12V

UNSW6V

5 4

321

S-1170B50UC-OUJTFGIC302

3.15APS301

10C336

XXC335

DCSW3.3V

XXR313

27kR339

0.5%

XXC330

3.15APS303

0.5%10k

R331

XXR311

1kR304

4700pC369

0.5%330

R353

4.7C332

XXR307

R368XX

DLL/HDVDD_1.05V

UNSW12V

DCSW5V

S

RTR020P02TRQ306

C3791 10k

R369

1kR370

SW3.3V

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

15PCN301

DR_SW5V

KEY0

M1FM3D307

0.01C337

0.022C338

1C331

JL302

4.7C344

R326XX

0.5%

R33410k

R32147k

R3651k

R3236.8k

R3141k

R31247k

0.5%

R3161.5k

R32410

JL301

R31

53.

9k0.

5%

R322150k

0.5%

R3188.2k

330R320

1C339

R327XX

C334XX

1uHL301

4V330

C361

2APS304

14

13

12

11

10

9

87

1

2

3

4

5

6

TPS51117PWRG4IC310

14

13

12

11

10

9

87

1

2

3

4

5

6

TPS51117PWRG4IC309

XXC341

RT3N11M-TP-1Q307

RT3N11M-TP-1Q308

EMI

FL311XX

R308XX

R310XX

C3430.1

R328XX

22C

345

22C

346

R332XX

R329XX

R330XX

C3490.1

8765

4 3 2 1

MP1415DSE-LF-ZIC311

R333XX

0.1C395

0.1C392

1

2

3

4

CN302XX

5

43

2

1

MM3141UNREIC308

C39

668

0p

680

R37

1

R372100k

C3972200p

5

43

2

1

MM3141UNREIC307

2.2uHL304

5 4

321

NJM2878F3-33(TE2)IC301

EMI

FL309XX

EMI

FL310XX

EMI

FL305

EMI

FL304

C39

868

0p

C3992200p

R373100k

680

R37

4

XXR375

XXR376

JL303

JL304

JL305

JL307

JL308

JL306

JL309

JL311

JL310

JL312

JL313

JL314

0.1C303

XXC304

XXR341

XXR342

XXC321

XXR377

XXR

378 R379

XX

8

7

6

5 4

3

2

1S1S2

S3GD

1D

2D

3D

4

RRH070N03TB1Q301

8

7

6

5 4

3

2

1S1S2

S3GD

1D

2D

3D

4

RRH070N03TB1Q303FB302

FB301

FB303

JL316

JL315

JL317

10C322

XXC323

10C350

XXC351

PCONT4

PCONT2

GND

ATA_PCONT

PCONT1

PCONT3

XXC347

XXC353

XXC348

XXC324

R380XX

XXR381

RT1N141M-TP-1Q305

RT1N141M-TP-1Q309

LL

DRVH

VBST

V5DRV

DRVLPGOOD

VFB

PGND

EN_PSV

TRIP

TON

V5FILT

GND

VOUT

CE

GN

D

NP

VIN

VOU

T

VDD

GND

CE

VOUT

NC

VOUT

CE

GND

VDD

NC

GND

VOUT

NCCE

VDD

BOO

T

GND

UNSW6V

NC

NC

SW

SS

ATA-PCONT

DR_SW5V

VOU

T

GND

GND

GND

VIN

CO

MP

FB

UNSW12V

GN

D

EN

VSS

Vin VI

N

ON

/OFF

CE

Vout G

ND

DR_GND

UNSW12V

P-ON

UNSW6V

UNSW6V

DR_GND

DR_SW12V

PGND

V5DRV

PGOOD

EN_PSV

LL

VFB

VBST

TONDRVH

TRIP

GND

VOUT

V5FILT

DRVL

GND

GND

UNSW6V

UNSW6V

MULTI REGULATOR

IC309

IC310MULTI REGULATOR

PLL+1.05V REGULATOR

IC308

DLL+1.05V REGULATOR

IC307

SW+5V REGULATOR

IC304

IC302DCSW5V REGULATOR

UNSW+3.3V REGULATOR

IC301

SW+3.3V REGULATOR

IC311

18

POWER1

9

D

E

1110 152 5

MB-127 BOARD (3/14)

K

3

I

17

05

F

1612

C

1 1986

XX MARK:NO MOUNT

20

G

14

A

13

H

74

J

B

50V

32V

32V

(NC)

B+ SWITCH

SWITCH B+ SWITCH

SWITCHING

REGULATORCONTROL

SWITCHING

SWITCHING

CONTROLREGULATOR

SWITCHING

SWITCHINGREGULATOR

(4/14) (5/14)

(10/14) (11/14)(6/14) (9/14)

MB-127

MB-127(14/14)

MB-127(14/14)

MB-127(12/14)

MB-127(4/14)

(8/14)MB-127

(2/14)

MB-127

(7/14)

(1/14)

(6/14)

(14/14)

MB-127

(7/14)

(14/14)MB-127

MB-127(14/14)

MB-127

(14/14)

(6/14)(11/14)

MB-127(14/14)

MB-127(8/14)

MB-127(7/14)

(2/14)

MB-127(1/14)

(4/14)MB-127

(7/14)



4-8

BDP-S360

4-8. MB-127 BOARD (CLK/POWER2) SCHEMATIC DIAGRAM (4/14) • See page 5-5 for printed wiring board.- Ref. No.: MB-127 board; 10,000 series -

GND

XXR401

0.1C404

XXR403

0.1C405

0.1C406

0.1C407

0.1C408

0.1C409

0.1C410

R404XX

7pC411

7pC413

XXR402

JL402

XXC401

PLL_1.05V

JL401

330R405

0.1C402

0.1C403

MC-10121F1_SW3.3V

0.1C421

0.1C420

0.1C422

0.1C418

0.1C419

0.1C416

0.1C417

0.1C415

0.1C414

CORE_1.05V

XXC438

0.1C437

0.1C436

0.1C435

0.1C434

0.1C433

0.1C432

0.1C431

0.1C430

0.1C429

0.1C428

0.1C427

XXC426

0.1C425

XXC424

0.1C423

1

2

27MHzX401

CLK27MOUT22

R407

10C440

10C441

EMI

FL401XX

0.1C442

JL403

XXR408

C4430.1

FB401

MC-10121F1-207-TA1-AIC101

CLK27INN1

CLK27OUTM1

XIR1

XOT1

CLKSELT2

PLS0VDDY13

PLS0GNDY14

PLSYVDDW13

PLSYGNDW14

PLAUVDDJ20

PLAUGNDJ21

PLA2VDDH20

PLA2GNDH21

PLV2VDDAB29

PLV2GNDAB28

PLMVVDDAC29

PLMVGNDAC28

PLSVVDDAB27

PLSVGNDAC27

PLUMVDDAC17

PLUMGNDAB17

PLURVDDAC16

PLURGNDAB16

VRVDDJ26

VRGNDJ27

MC-10121F1-207-TA1-AIC101

GNDA25

GNDA27

GNDA29

GNDA31

GNDD19

GNDD26

GNDE25

GNDE32

GNDE33

GNDE35

GNDF32

GNDF34

GNDG33

GNDG35

GNDH32

GNDH34

GNDJ29

GNDJ31

GNDJ33

GNDK29

GNDK30

GNDL27

GNDL29

GNDM31

GNDP1

GNDT27

GNDT28

GNDU34

GNDU35

GNDV33

GNDW27

GNDW28

GNDW29

GNDW32

GNDAA27

GNDAA28

GNDAA29

GNDAA30

GNDAA31

GNDAD33

GNDAE27

GNDAE28

GNDAF34

GNDAG35

GNDAH32

GNDAK30

GNDAL35

GNDAM32

GNDAG26

GNDAG27

GNDAH28

GNDAL28

GNDAG24

GNDAH24

GNDAJ23

GNDAJ24

GNDC28

GNDD29

GNDD31

GNDF28

GNDJ23

VDD3R5

VDD3C27

VDD3E34

VDD3G32

VDD3J32

VDD3K31

VDD3L28

VDD3M27

VDD3T35

VDD3U32

VDD3Y27

VDD3Y28

VDD3Y29

VDD3AB31

VDD3AD27

VDD3AD28

VDD3AE34

VDD3AG31

VDD3AG23

VDD3AH23

VDD3AJ25

VDD3AJ35

VDD3AL27

VDD3AL31

VDD3AN29

VDD3AN33

VDD3C29

VDD3C31

VDD3G25

VDD3J19

VDD3J22

VDD10K27

VDD10K28

VDD10N16

VDD10N18

VDD10N20

VDD10N22

VDD10N23

VDD10P16

VDD10P18

VDD10P20

VDD10P22

VDD10P23

VDD10T13

VDD10T14

VDD10T22

VDD10T23

VDD10V28

VDD10V29

VDD10Y22

VDD10Y23

VDD10AB13

VDD10AB14

VDD10AB20

VDD10AB22

VDD10AB23

VDD10AB30

VDD10AC13

VDD10AC14

VDD10AC20

VDD10AC22

VDD10AC23

VDD10AF27

VDD10AF28

VDD10AG25

VDD10AH25

MC-10121F1-207-TA1-AIC101

GNDN19

GNDN21

GNDP19

GNDP21

GNDR18

GNDR19

GNDR20

GNDR21

GNDR22

GNDR23

GNDT18

GNDT19

GNDT20

GNDT21

GNDU17

GNDU18

GNDU19

GNDU20

GNDU21

GNDU22

GNDU23

GNDV13

GNDV14

GNDV15

GNDV16

GNDV17

GNDV18

GNDV19

GNDV20

GNDV21

GNDW15

GNDW16

GNDW17

GNDW18

GNDW19

GNDW20

GNDW21

GNDW22

GNDW23

GNDY15

GNDY16

GNDY17

GNDY18

GNDY19

GNDY20

GNDY21

GNDAA13

GNDAA14

GNDAA15

GNDAA16

GNDAA17

GNDAA18

GNDAA19

GNDAA20

GNDAA21

GNDAA22

GNDAA23

GNDAB15

GNDAC15

GNDAB18

GNDAB19

GNDAC18

GNDAC19

GNDAB21

GNDAC21

220R409



(3/15)



(4/15)A/V OUT, HDMI, ETHERNET I/F, USB I/F


(5/15)CLK/POWER2

9

D

E

11102 5

MB-127 BOARD (4/14)

K

3

I

05

F

12

C

1 86

XX MARK:NO MOUNT

G

A

H

74

J

B

(6/14)MB-127

(3/14)MB-127

(3/14)MB-127

13

4-9

BDP-S360

4-9. MB-127 BOARD (FLASH/HOST) SCHEMATIC DIAGRAM (5/14) • See page 5-5 for printed wiring board.- Ref. No.: MB-127 board; 10,000 series -

NO MARK:PB MODE

0

0

0

0

0

0

0

0

3.3

3.3

0

0

0

0

0

0

0

0

3.3

3.3

3.3

3.3

3.3

3.3

3.3

3.3

3.3

3.3

3.3

3.3

GND

MC-10121F1_SW3.3V

0.1C513

0.1C511

0.1C514

22RB502

22RB503

XXRB504

22RB505

22RB506

22RB507

XXR503

XXR504

22RB514

22RB511

22RB513

22RB512

XXR

501

XXR

502

10k

R50

6

XXR

508

XXR

507

RB51010k

R511 XX

R510 10k

R509XX

R514 10k

XXR513

R512 10k

S501

1

2

3

4

5

6

7 42

43

44

45

46

47

48

41

40

39

38

37

36

35

34

3316

15

14

13

12

11

10

9

8

32

31

30

29

28

27

26

25

17

18

19

20

21

22

23

24

K9F2G08U0B-PCB0TIC502

NC

NC

NC

NC

NC

NC

RY/BY

nRE

nCE

NC

NC

VCC

VSS

NC

NC

CLE

ALE

WE

WP

NC

NC

NC

NC

NC NC

NC

NC

NC

IO1

IO2

IO3

IO4

NC

NC

NC

VSS

VCC

NC

NC

NC

IO5

IO6

IO7

IO8

NC

NC

NC

NC

R518XX

XXR516

3.3kR519

33R517

10kR515

XXR520

XXRB515

XXRB516

XXRB517

XXRB518

XXRB519

XXRB520

NAND_WP

XXC516

XXR522XXR521

A1B1

A2

A3

A4

A5

A6

A7

A8

A9

A10

A11

A12

A13

A14

A15

A16

A17

A18

A19

A20

A21

A22

A23

A24

B2

B3

B4

B5

B6

B7

B8

B9

B10

B11

B12

B13

B14

B15

B16

B17

B18

B19

B20

B21

B22

B23

B24

B25 A25

A30

B26

A34

B30

B34

A29

A33

B29

B33

A28

A32

B28

B32

A27

A31

B27

A35

B31

B35

A26

XXCN501

MC-10121F1_XRSTR523100

GLB_XRST

PCIP_CLK_BAG

JL501

JL502

JL503

JL504

JL505

JL506

JL507

JL508

JL509

JL510

JL520

JL511

JL513

JL516

JL519

JL512

JL517

JL518

JL515

JL530

JL521

JL523

JL524

JL526

JL529

JL522

JL527

JL528

JL525

JL540

JL531

JL533

JL534

JL536

JL542

JL541

JL539

JL532

JL537

JL538

JL543

JL535

JL549

JL545

JL550

JL544

JL547

JL548

JL546

JL551

JL553

JL552

JL555

JL554

JL556

XXR505

XXR528

XXR

524

R52

510

k

R52

610

k

10kR527

10k

R55

1

XXR

553

XXR

554

XXR

555

1

2

3

4

5

6

7 42

43

44

45

46

47

48

41

40

39

38

37

36

35

34

3316

15

14

13

12

11

10

9

8

32

31

30

29

28

27

26

25

17

18

19

20

21

22

23

24

MX29LV400CTTI-70G-P4G02IC501

JL557

JL558

JL559

C5170.01

JL560

XXR

557

10k

R55

6

10k

R55

8

10k

R55

9

10k

R56

3

XXR

562

R56

110

k

10k

R56

0

R56

4XX10

kR

565

XXRB521

10kRB522

22RB508

XXRB501

22RB509

JL514

JL561

JL562

JL563

JL564

JL565

JL566

JL567

JL568

JL569

JL570

JL571

JL572

JL573

JL574

JL575

JL576

JL577

JL578

JL579

JL580

JL581

JL582

JL583

JL584

JL585

JL586

JL587

JL588

JL589

JL590

JL591

JL592

JL593

JL594

JL595

JL596

JL597

10k

R56

6

10k

R55

0

MC-10121F1-207-TA1-AIC101

RADD0AN34

RADD1AM35

RADD2AM34

RADD3AM33

RADD4AL34

RADD5AL33

RADD6AL32

RADD7AL30

RADD8AL29

RADD9AK35

RADD10AK34

RADD11AK33

RADD12AK32

RADD13AK31

RADD14AK29

RADD15AJ34

RADD16AJ33

RADD17AJ32

RADD18AJ31

RADD19AJ30

RADD20AJ29

RADD21AH35

RADD22AH34

RADD23AH33

RADD24AH31

RADD25AH30

RDATA0AH29

RDATA1AG34

RDATA2AG33

RDATA3AG32

RDATA4AG30

RDATA5AG29

RDATA6AF33

RDATA7AF32

RDATA8AF31

RDATA9AF30

RDATA10AF29

RDATA11AE33

RDATA12AE32

RDATA13AE31

RDATA14AE30

RDATA15AE29

GCSB0AP32

GCSB1AP33

GRDYBAN30

FOEBAN31

FWEBAN32

FCSB0AM28

FCSB1AM29

FCSB2AM30

FCSB3AM31

NFOEBAR30

NWEBAR31

NRBBAP30

NALEAR32

NCLEAP31

EMI_AD2

EMI_AD3

EMI_AD5

EMI_AD6

EMI_AD7

EMI_AD8

EMI_AD9

EMI_AD10

EMI_AD11

EMI_AD12

EMI_AD13

EMI_AD14

EMI_AD15

EMI_AD16

EMI_AD18

EMI_AD19

EMI_AD4

EMI_XRDY

EMI_XNOE

EMI_XFCS1

EMI_NCLE

EMI_NALE

EMI_XNWE

EMI_AD0

EMI_AD2

EMI_AD4

EMI_AD6

EMI_AD8

EMI_AD10

EMI_AD12

EMI_AD14

EMI_AD16

EMI_AD18

EMI_AD20

EMI_AD22

EMI_AD24

EMI_AD1

EMI_AD3

EMI_AD5

EMI_AD7

EMI_AD9

EMI_AD11

EMI_AD13

EMI_AD15

EMI_AD17

EMI_AD19

EMI_AD21

EMI_AD23

EMI_AD25

EMI_XWE

EMI-AD11

EMI-AD15

EMI-AD16

EMI-AD19

EMI-AD20

EMI-AD21

EMI-AD22

EMI-AD23

EMI-AD18

EMI-AD8

EMI-AD7

EMI-AD6

EMI-AD12

EMI-AD9

EMI-AD10

EMI-AD11

EMI-AD22

EMI-AD21

EMI-AD23

EMI-AD20

EMI-AD13

EMI-AD15

EMI-AD14

EMI-AD16

EMI-AD4

EMI-AD5

EMI-AD3

EMI-AD2

EMI-AD25

EMI-AD1

EMI-AD24

EMI-AD17

EMI-AD19

EMI-AD0

EMI_XWE

EMI_XGCS0

EMI_XGCS1

EMI_XFCS2

EMI_XFCS3

EMI_XRDY

EMI_XGRDY EMI_XNWE

EMI_NALE

EMI_XNOE

EMI_NCLE

EMI_XFCS1

EMI_XOE

EMI_XFCS0

EMI_DT11

EMI_DT3

EMI_DT10

EMI_DT2

EMI_DT9

EMI_DT1

EMI_DT8

EMI_DT0

EMI_DT4

EMI_DT12

EMI_DT5

EMI_DT13

EMI_DT6

EMI_DT14

EMI_DT7

EMI_DT15

EMI_DT7

EMI_DT13

EMI_DT2

EMI_DT9

EMI_DT3

EMI_DT5

EMI_DT4

EMI_DT12

EMI_DT11

EMI_DT1

EMI_DT14

EMI_DT8

EMI_DT6

EMI_DT0

EMI_DT10

EMI_DT15

EMI_AD0

EMI_AD19

EMI_AD18

EMI_AD24

EMI_AD8

EMI_AD14

EMI_AD3

EMI_AD2

EMI_AD22

EMI_AD21

EMI_AD25

EMI_AD7

EMI_AD15

EMI_AD4

EMI_AD11

EMI_AD23

EMI_AD9

EMI_AD1

EMI_AD6

EMI_AD17

EMI_AD13

EMI_AD16

EMI_AD12

EMI_AD5

EMI_AD20

EMI_AD10

EMI_XGCS0

EMI_XGCS1

EMI_NALE

EMI_XNOE

EMI-AD0

EMI-AD1

EMI-AD2

EMI-AD3

EMI-AD4

EMI-AD5

EMI-AD6

EMI-AD7

EMI-AD8

EMI-AD9

EMI-AD10

EMI-AD12

EMI-AD14

EMI-AD17

EMI-AD18

EMI-AD24

EMI-AD25

EMI-AD13

EMI_XFCS2

EMI_XOE

EMI_XFCS0

EMI_NCLE

EMI_XNWE

EMI_XRDY

EMI_XFCS3

EMI_XFCS1

EMI_XWE

EMI_XGRDY

EMI_DT0

EMI_DT1

EMI_DT2

EMI_DT3

EMI_DT4

EMI_DT5

EMI_DT6

EMI_DT7

EMI_AD1

EMI_XFCS0

EMI_XOE

EMI_DT0

EMI_DT8

EMI_DT1

EMI_DT9

EMI_DT2

EMI_DT10

EMI_DT3

EMI_DT11

EMI_AD17

EMI_DT15

EMI_DT7

EMI_DT14

EMI_DT6

EMI_DT13

EMI_DT5

EMI_DT12

EMI_DT4

GND

3.3V

SYSCLK

EMI_XOE

EMI_XFCS0

EMI_XFCS2

EMI_XNFOE

EMI_XGCS0

EMI_XGRDY

EMI_NALE

GND

EMI_AD0

EMI_AD2

EMI_AD4

EMI_AD6

EMI_AD10

EMI_AD8

EMI_AD12

EMI_AD14

EMI_AD18

EMI_AD16

EMI_AD22

EMI_AD20

EMI_AD24

GND

EMI_DT0

EMI_DT2

EMI_DT6

EMI_DT4

EMI_DT8

EMI_DT10

EMI_DT14

EMI_DT12

3.3V

GND

3.3V

GND

GND

GND

GND

3.3V

GLB_XRST

EMI_XWE

EMI_XFCS1

EMI_XFCS3

EMI_XNWE

EMI_XGCS1

EMI_NRB

EMI_NCLE

EMI_AD1

EMI_AD3

EMI_AD5

EMI_AD7

EMI_AD15

EMI_AD9

EMI_AD11

EMI_AD13

EMI_AD21

EMI_AD17

EMI_AD19EMI_AD23

EMI_AD25

EMI_DT1

EMI_DT3

EMI_DT5

EMI_DT7

EMI_DT9

EMI_DT11

EMI_DT13

EMI_DT15

DQ0

DQ11N.C

DQ1

A14

A5

DQ15/A-1

WEDQ12

A1

A16

OE

DQ3

DQ8A6

DQ7

N.C

A9

DQ4

A2

DQ6

VSS

A13

DQ10

A7

N.C

VCC

A10DQ14

A3

DQ13

A12

DQ2A17

BYTE

RY/BY

CE

A15

N.C

A8

DQ9

A4

VSS

A11

DQ5

A0

N.C

RESET

(6/15)MAIN SYSTEM CONTROL, DSP, SATA I/F, MEMORY CONTROL,


4M NOR FLASH ROM

IC501

2G NAND FLASH ROM

IC502

18

M

FLASH/HOST

9

D

E

1110 152 5

MB-127 BOARD (5/14)

K

3

I

17

05

F

1612

C

1 1986

XX MARK:NO MOUNT

20

G

14

A

13

H

L

74

J

B

XX

(NC)

MB-127(9/14)

MB-127(6/14)

MB-127(9/14)

MB-127(3/14)

4-10

BDP-S360

4-10. MB-127 BOARD (USB) SCHEMATIC DIAGRAM (6/14) • See page 5-5 for printed wiring board.- Ref. No.: MB-127 board; 10,000 series -

NO MARK:PB MODE

3.3

5.8 5 5

D602XX D606

XX

D603XX

D601MA2J1110GLS0

10V

22C

610

10V220

C617

UNSW6V

C61

4XX

USB_VBUS_PCONT

R6162.2k0.5%

0.5%

R61739k

0.5%

R61810k

XXL606

XXC611

SW3.3V

XXC615

OE VDD

OUTGND

X602XX

PCIP_CLK_BAG

10k

R61

5

R620XX

C618XX

R63010k

1

2

3

4

5

CN601XX

XXR619

0.1C603

1C609

1C

613

JL601

JL602

XXC

612

XXR614

MC-10121F1_SW3.3V

2.2C605

0.1C606

0.001C604

2.2C602

10kR606

10kR60715

kR

610

15k

R61

1

39R602

39R601

0.5%1.6kR603

8pC607

8pC608XX

R608

820R609

MC-10121F1_XRST

GND

39R605

D60

5PG

B001

0603

NR

D607XX

39R604

1

2

3

4

5

5PCN602

C61910

JL603

D60

4PG

B001

0603

NR

JL604

15k

R63

1

15k

R63

2

100R635

JL605

R636XX

R6370

R6390

XXR640

CLK27MOUT

R638XX

XXC601

8

7

6

54

3

2

1

XXIC602

R624XX

R623XX

XXR625

R622XX

R6210

R626XX

C620XX

C621XX

C622XX

C623XX

0.01C624

JL606

JL607

JL608

JL609

JL610

JL611

JL612

JL613

3 1

24

XXL605

3 1

24

L609

1 2 3 4

6

5

SI-3010KM-TLSIC601

E_VBUS_DET

FB601

XXC

625

MC-10121F1-207-TA1-AIC101

USBVDD33Y32

USBVDD33Y33

USBPVSSAA33

USBDGNDW33

USBDGNDY34

USBDGNDY35

USBPVDDFILAA32

USBAVDDAC34

USBAVSSAD35

USBRSDM1AB35

USBRSDP1AA35

USBDM1AB34

USBDP1AA34

USBRSDM2W35

USBRSDP2V35

USBDM2W34

USBDP2V34

USBRREFAC35

USBOCI1W31

USBOCI2W30

USBPPON1Y31

USBPPON2Y30

USBXOAE35

USBXIAF35

USBCOMAD34

PCIRSTBAD31

PCICLKIAD32

30MHzX601

XXL604

L603XX

L60718nH

L60818nH

L601 L602

DP

DM

VBUS

GND

GND

GND

DM

VBUS

GND

DP

VCCA

A1

A2

GND

VCCB

B1

B2

DIR

Vc Vin

GN

D

Vo ADJ

GN

D

(7/15)A/V OUT, HDMI, ETHERNET I/F, USB I/F


IC601+5V REGULATOR

(NC)

(SEE PAGE 4-19)

USB-014BOARDCN362

USB

9

D

E

11102 5

MB-127 BOARD (6/14)3

05

F

12

C

1 86

XX MARK:NO MOUNT

G

A

74

B(3/14)

MB-127

MB-127(9/14)

(5/14)MB-127

MB-127(4/14)

MB-127(3/14)

MB-127(14/14)

MB-127(9/14)

4-11

BDP-S360

4-11. MB-127 BOARD (HDMI/SATA) SCHEMATIC DIAGRAM (7/14) • See page 5-5 for printed wiring board.- Ref. No.: MB-127 board; 10,000 series -

NO MARK:PB MODE

5.7

4.9

5.7

3.3

3.1

1.3

1.3

3.1

3.33.3

5.7

0

3.3

0

0

4.9

3.3

3.3

3.3

3.3

4.9

XXR708

GND

XXC711

C7130.1

C716XX

0.1C722

C725XX

CORE_1.05V

XXC731

XXR709

XXR707

0.01C738

XXC739

XXC740

3.3kR724

3.3kR725

XXR719

XXR718

5 4

321

TK11133CSCL-GIC704

CO

NT

GN

D

NO

ISE

VOU

T

VIN

XXC749

XXC748 0.01

C709

0.22C706

0.22C708

XXR722

15kR723

DCSW3.3V

HDMI_PCONT

UNSW6V

XXFB703

R739 0 R738 0

XXFB702

R741 0

XXFB704

R740 0

XXFB705

XXFB701

R737 01.8kR733

1.8kR734

5

4 3

2

1

TC7SH08FU(T5RSOYJF)IC703

A

B

GY

V

0.01C747

3.3kR730

4.7kR729

47kR728

0.22C760

5 4

321

TK11150CSCL-GIC705

CO

NT

GN

D

NO

ISE

VOU

T

VIN

0.01C759

15kR732

XXR731

D702 XX

D703 XX

D704 XX

D705 XX

D706 XX

D707 XX

D708 XX

D709 XX

D711 XX

D712 XX

D713 XX

0.22C757

D701 XX

D710 XX

0.1C712

XXC741

XXR714

XXC742XX

R715

XXC743XX

R716

XXR717

XXC744

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

23PCN702

XXR706

0.1C707

0.1C758

XXR727

XXC751

PCONT2

XXR742

XXR743

PCONT3

1 2

34

L705

1 2

34

L706

1 2

34

L707

1 2

34

L708

R713XX

DLL/HDVDD_1.05V

0.01C762XX

R745

0.5%5.6kR711

0.5%560

R712XX

R746

CEC

XXR704

XXR703

XXC732

EMIFL701

XX

S

INK0001ACQ702

0.01C704

JL701

JL702

JL703

JL704

JL705

JL706

XXR747

XXR748

XXR750

XXR751

5 4

321

IC702XX

XXR752

FB706XX

D1G2S2

D2 G1 S1

RT3K11M-T111-1Q701

MC-10121F1-207-TA1-AIC101

SAGNDDIGA24

SAGNDDIGB24

SARXP0A23

SARXN0B23

SAGNDDIGA22

SAGNDDIGB22

SATXN0A21

SATXP0B21

SAGNDDIGA20

SAGNDDIGB20

SAGNDDIGC23

SAGNDDIGC22

SAGNDDIGC21

SAGNDDIGC20

SAGNDDIGC19

SAGNDDIGH19

SAGNDDIGH18

SAGNDDIGJ18

SACREFPB19

SACREFNA19

SAVDDANAB18

SAGNDANAA18

SAVDDDIG D20

SAVDDDIG E20

SAVDDDIG F20

SAVDDDIG G19

SAVDDTIO D21

SAVDDTIO E21

SAVDDTIO F21

SAVDDTIO G20

MC-10121F1-207-TA1-AIC101

HDVSSJ35

HDVSSJ34

HTXP2K34

HTXN2K35

HTXP1L34

HTXN1L35

HDVSSK33

HDVSSL33

HTXP0M34

HTXN0M35

HTXCPN34

HTXCNN35

HDVSSM33

HDVSSN33

HDSCLU27

HDSDAV27

HHPDT31

HEXTNP35

HEXTPP34

HDVSSR35

HDVSSR34

HDVSSP33

HDVSSL32

HDVSSP32

HDVSSN31

HDVSSP30

HDVSSR30

HDVSST30

HDVSSR29

HDVSST29

HDVSSU28

HDVDD_IOM32

HDVDD_ION32

HDVDD_IOR32

HDVDDR33

HDVDDP31

HDVDDR31

HDVDDN30

HAVDDV22

HAVSSV23

CL701

CL702

XXR701

XXR702

XXR705

XXC702

XXC701

XXR720

XXC705

XXC703

XXR710

5 4

321

IC701XX

CO

NT

GN

D

NO

ISE

VOU

T

VIN

XXR721

XXR726

TX2P

TX0N

TX2N

TCKN

TCKP

TX0P

TX1N

TX1P

TX2P

TX2N

TX1P

TX1N

TX0P

TX0N

TCKP

TCKN

TMDS DATA2 +

TMDS DATA2 SHIELD

TMDS DATA2 -

TMDS DATA1 +

TMDS DATA1 SHIELD

TMDS DATA1 -

TMDS DATA0 +

TMDS DATA0 SHIELD

TMDS DATA0 -

TMDS CLOCK +

TMDS CLOCK SHIELD

TMDS CLOCK -

CEC

RESERVED

SCL

SDA

DDC/CEC GND

+5V POWER

HPD

PARTS BODY

PARTS BODY

PARTS BODY

PARTS BODY

VDD

GN

D

CE

VOU

T

NC

MAIN SYSTEM CONTROL, DSP, SATA I/F, MEMORY CONTROL,


(8/15)



(9/15)

HDMI OUT

IC703BUFFER

IC704+3.3V REGULATOR

IC705+5V REGULATOR

HDMI/SATA

9

D

E

1110 152 5

MB-127 BOARD (7/14)

K

3

I

05

F

1612

C

1 86

XX MARK:NO MOUNT

G

14

A

13

H

74

J

B

LEVEL SHIFT

(3/14)MB-127

(14/14)MB-127

LEVEL SHIFT

(3/14)MB-127

(3/14)MB-127

4-12

BDP-S360

4-12. MB-127 BOARD (AUDIO/VIDEO) SCHEMATIC DIAGRAM (8/14) • See page 5-5 for printed wiring board.- Ref. No.: MB-127 board; 10,000 series -

NO MARK:PB MODE

4.9

3.3

3.3

5

1.6

5.6

3.3

4.9

1.3 3.2 3.1

12.312.3

11.6

-7.7

-8.4-8.5

-8.4

-7.8

-8.5

-8.5-8.5

-7.8

5 4.9

1.6 4.9

5

2.5

2.5

2.5

2.5

1.7

1.2

1.7

3.3

3.3

3.3

0

5.6

3.1

3.1

0

0

10.6

10.6 -8.4

10.6

-8.4

0

0

-8.4

0

12.31.3

1.3

01.3

1.3

-8.5

3.3

0.2

-5

3.3

0.1

0.2

-5

0

0

5

0.7

3.3

-5

0.5

3.3

0.5

0.7

-5

0.6

3.3

3.3

3

4

5

2

19

8

7

6

-5-8.4

5

1.8

2.5

150R819

150R820

0.1C803

680R821

XXC806

150R822

150R823

150R824

0.1C807

16V47

C810

0.1C802

XXC811

470R825

0.1C812

0.1C814

0.1C805

GND

3.3k

R82

9

3.3kR830

2.2kR828

0.5%2.2kR827

0.5%1

C819XX

C8201

C821

R832XX

R833XX

PCONT3

XVMUTE

ASPECT0

ASPECT1

IP

FORMAT1

FORMAT0

47R805

47R808

47R807

47R806

33R816

VCC

IN

GND

GP1FAV51TKSFIC801

1

2

3XX

R831

0.01C817

D801XX

XXC816

1C804

10kR82668

R818

2SC3052EF-T1-LEFQ801

220R817

1kR804

10kR801

1kR802 1

C801 1kR803

XAMUTE

DAC_XRST

MC-10121F1_CSI0_DAC2_XCS

MC-10121F1_CSI0_CKO

MC-10121F1_CSI0_DO

XXL801

PCONT2

DCSW5V

R84410k

R84510k 10k

R84610k

R847

XXR834

XXR843

XXR841

XXR837

XXR836

XXR835

XXR840

XXR839

XXR838

0.1C849

Q804

R894

1C833

XXR8028

Q803XX

R8053

0.1C864

XXR892

1kR873

0.1C865

XXL804

XXR8055

R887

Q8152SC6053-T112-1F

XXR8054

Q810

XXR8015

R8044XX

XXC832

75R8042

16V47

C859

0.1C846

R804575

XXR8056

MAZW068HGLS0D811

R8040XX

D808XX

XXR8027

MAZW068HGLS0D810

0.1C840

MAZW068HGLS0D807

D806XX

32

31

30

29

28

27

1

2

3

4

5

6

26

25

24

7

8

9

23

22

21

20

10

11

12

19

18

17

13

14

15

16

NJM2564BV(TE2)IC808

XXC862

XXR869

MAZW068HGLS0D809

100R8039

XXR874

XXR8035

XXR8052

XXR8025

XXR8024

0.1C856

10kR8009

XXR8051

75R8043

0.1C855

75R8041

R880

R8012

1C829

XXL803

R871

XXR890

R872

I OCOM

IC806L79M05TLL-SONY-TL-E

XXC827

R8016

0.1C853

3.3kR8005

XXR8014

R8018

XXR8006

Q813RT1P241M-TP-1

XXR8013

R891

16V47

C867

R8017

R80260

0.5APS802

5.6kR881

5.6kR8008

0.5%

D804XX

RT1P141M-TP-1Q805

100kR8038

47kR8031

5.6kR8007

0.5%

C837XX

XXR862

5.6kR8021

0.5%

16V47

C834

10kR895

C860220p

C822XX

16V47

C852

XXR886

8765

4 3 2 1

NJM4558M-TE2IC807

O-+

-VSS

+ - O +VC

C

150R8011

0.5%68R865

16V47

C831

5.1kR899

0.5%

470R8037

MC2838-T112-1D803

C8240.001

MA2J1110GLS0D802

3900pC838

470R8029

10kR885

150R8010

0.5%

2SC6053-T112-1FQ807

D805XX

0.1C858

10kR893

100R868

390pC841

SW5VD

5.1kR898

0.5%

16V47

C850

470R882

5.1kR897

0.5%

1kR883

150R8022

0.5%

5.6kR8020

0.5%

5.1kR896

0.5%

XXR870

Q811RT1N240M-T111-1

XXR861

4.7kR877

C836XX5.6k

R884

150R8019

0.5%

XXR8046

XXR876

XXR8033

C861220p

1C835

390pC847

32V1A

PS803

Q812ISA1235AC1TP-1EF

390pC848

XXR8034

470R8030

100kR889

C868XX

68R867

47kR888

C8260.22

390pC842

10kR878

0.1C843

16

15

14

13

12

11

10

98

7

6

5

4

3

2

1

IC804AK4382AVTN-E2

68R864

470R8036

1

2

3

4

5

5PCN801

Q8092SC3052EF-T1-LEF

XXR857

47kR8032

3900pC839

Q8082SA2167-T111-1E

68R866

10kR879

JL815

JL816

JL817

JL810

JL809

JL806

JL808

JL811

JL807

JL805

10C818

10C828

XXR8023

1

2

3

4

5

6

7

8

XXCN802

32V1A

PS804

XXC808

XXC809

C8440.001

C8300.001

JL821

JL822

JL823

JL824

JL825

JL826

JL827

JL828

JL829

JL830

XXR848

XXR849

XXR850

XXR851

XXR856

68R812

68R813

68R814

R815XX

XXR852

XXR863

XXR875

XXR811

XXR810

XXR809

5 4

321

NJM2878F3-33(TE2)IC805

5 4

321

NJM2878F3-33(TE2)IC802

CTL

GN

D

NC

VOVI

C81310

JL831

JL832

JL833

JL834

XXR853

RT3XAAMQ816

MC-10121F1-207-TA1-AIC101

VAYF33

VACH33

VAREFYCM29

VARSETYCL30

VACOMPYCK32

VARG34

VAGH35

VABF35

DVDDYCM28

AVDDYCN27

AGNDYCN28

AGNDYCP27

VACOMPRGBN29

VARSETRGBM30

VAREFRGBL31

DVDDRGBP29

AVDDRGBR27

AGNDRGBP28

AGNDRGBR28

AO1MCKG27

AO1BCKE29

AO1BDE28

AO1LRCKF27

AO0BCKG26

AO0BD3D27

AO0BD0D28

AO0BD1E26

AO0BD2F26

AO0LRCKE27

AO0MCKD30

ATXC30

R842XX

XXR854

XXR855

XXR858

XXR859

XXR860

C8150.001

C8450.001

C8510.001

XXR8004

XXC854

4

3

1

2

PST8250ULIC809

0.1C869

Q806RT1N441M-TP-1

Q814 Q818XX

34

12

G

J801

AO1MCK

AO1LRCK

AO1BD

AO1BCK

SD_C

SD_Y

HD_Y

HD_PB

HD_PR

AO1BCK

AO1BD

AO1LRCK

AO1MCK

SD_Y

SD_C

HD_PR

HD_Y

HD_PB

V-1

S2

SYIN

V+2

YIN

GND2

PBIN

V-2

PS1

PRIN

LPFSW

PS2NC

PROUT

S1

GND3

YOUT

PBOUT

V-3

V+3

V-4

SYOUT

V+S

GND4

SCIN

VOUT

V+1V+4

NC

SCOUT

GND1

SDCOUT

CDTI

AOUTL-

UNSW6VA

SDTI

AOUTR-

AOUTL+

VDD

VSS

GND

MCLK

LRCK

PDN

UNSW12VA

CSN

DZFRBICK

DZFL

CCLK

GND

AOUTR+

UNSW-9VA

Y_OUT

CB_OUT

GND

CR_OUT

LINE3

GND

LINE2

LINE1

GND

NC

OUT

VDD



(10/15)

IC801OPTICAL TRANSMITTER

(OPTICAL)DIGITAL OUT

BUFFER

+3.3V REGULATOR

IC802

VIDEO AMP

IC808

+3.3V REGULATOR

IC805-5V REGULATOR

IC806

D/A CONVERTER

IC804

LINE AMP

IC807

RESET

IC809

2118

M

AUDIO/VIDEO

9

D

E

11

N

10 152 5

MB-127 BOARD (8/14)

K

3

I

17

F

1612

C

1 1986

XX MARK:NO MOUNT

20

G

14

A

13

H

L

74

J

B

O

22

P

05

MB-127(3/14)

MB-127(14/14)

(9/14)MB-127

XX XX

XX

XX

XX

XX

XX

XX XX

XX

XXXX

XX

XX

50V

REGULATORSWITCHING

MUTE DRIVE

Q805, Q807B- SWITCH

Q808, Q809B+ SWITCH

Q813, Q815B- SWITCH

Q811, Q812MUTE DRIVE

MUTING

(NC)

(9/14)MB-127

(14/14)MB-127

(3/14)MB-127

(9/14)MB-127

7P

VIDEO

(NC)

AUDIO (L)

AUDIO (R)

Y

PB

PR

VIDEO OUTCOMPONENT

LINE OUT

DIGITAL OUT(COAXIAL)

S357/S360: EC1, EC2, CEK, CH, RU, EA, KR/S363



4-13

BDP-S360

4-13. MB-127 BOARD (GPIO/JTAG) SCHEMATIC DIAGRAM (9/14) • See page 5-5 for printed wiring board.- Ref. No.: MB-127 board; 10,000 series -

IP

XVMUTE

FORMAT1

ASPECT0

ASPECT1

FORMAT0

MC-10121F1_CSI0_DO

MC-10121F1_CSI0_CKO

GND

MC-10121F1_SW3.3V

GLB_XRST

XAMUTE

MC-10121F1_CSI0_DAC2_XCS

DAC_XRST

NAND_WP

R941 10k

R940 10k

10kRB901R922

10k

R947XX

XXR943

USB_VBUS_PCONT

XXR944

XXR946

XXR945

22R962

R932 XX

R954XX

R931XX

R949XX

R94810k

10kRB902

10kRB904

10kRB903

R97710k

R961XX

22R963

R923 10k

R924 XX

R926 22

R925 XX

1

2

3

4

5

6

CN9026P

10kR942

100R953

R93010k

XXR939

10kR938

10kR936

22R937

10kR933

8 7 6 5

4321

IC90

1

R918R916

R919XX

MC-10121F1_XRST

C904

JL906

JL7005

JL7006

JL909

JL910

JL911

JL912

JL917

JL918

JL919

JL920

JL921

JL924

JL925

JL922

JL913

JL914

JL915

JL926

JL927

JL928

JL929

JL930

JL931

JL933

JL944

JL945

JL946

JL947

JL948

JL949

JL916

JL934

JL950

JL951

JL932

JL952

JL953

JL954

JL955

JL956

JL957

JL939

JL940

JL958

JL959

JL960

JL941

JL961

JL942

JL943

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

CN903XXR902

XXR903

XXR904

XXR910

XXR911

R912

R929 XX

R917

R96010k

XXR909

XXC906

XXC907

XXC908

XXC909

22R934

22R935

22R928

22R927

JL963

JL962

C9050.01

R915

R9140

C902 C901XX

C903XX

JL7033

JL7032

JL7011

JL7030

VODC1

VODC7

AOHBCK

VODC9

VODC4

VODY6

VODY1

AOHBD3

VODY7

AOHMCK

VODC6

VOHSB

VODC0

VODY9

AOHBD0

VODY4

AOHBD1

VODC2

VODC5

AOHLRCK

VOCLK

VOVSB

VODC8

VODY3

AOHTX

VODY2

VODY0

VODY5

AOHBD2

VODY8

VODC3

IF_SDI

SYSCON_REQ

SYSCON_RST

IF_SDO

IF_SCK

XIF_CS

START_BIT

R92110k

JL964

JL965

JL966

JL967

JL968

JL969

JL970

JL971

JL972

JL973

JL974

JL975

JL976

JL977

JL978

JL979

JL980

JL981

JL982

JL983

JL984

JL985

JL986

JL987

JL988

JL989

JL990

JL991

JL992

JL993

JL994

JL995

JL996

JL997

JL998

JL999

JL9001

JL9002

JL9003

JL9004

R97810k

1kRB905

JL923

MC-10121F1-207-TA1-AIC101

S0DIND33

S0DOUTD34

S0CKOUTD35

S2DINC34

S2DOUTC33

S2CSBB33

S2CKINC32

GPIO0H17

GPIO1G18

GPIO2J17

GPIO3F19

GPIO4E19

GPIO5J16

GPIO6F18

GPIO7E18

GPIO8D32

GPIO9E31

GPIO10E30

GPIO11J28

GPIO12G29

GPIO13H28

GPIO14G28

GPIO15F29

GPIO16AC30

GPIO17AC31

GPIO18AB32

GPIO19AD30

GPIO20H16

GPIO21AK27

GPIO22AG28

GPIO23AJ28

GPIO24AH26

GPIO25AJ26

GPIO26AH27

GPIO27AK28

GPIO28AJ27

GPIO29AK26

GPIO30AD29

GPIO31AC33

GPIO32AB33

GPIO33AC32

GPIO34D22

GPIO35A26

GPIO36G21

GPIO37D23

GPIO38E22

GPIO39F22

GPIO40B25

GPIO41C24

GPIO42B26

GPIO43A28

GPIO44G22

GPIO45B27

GPIO46B28

GPIO47E23

GPIO48F23

GPIO49D24

GPIO50C25

GPIO51C26

GPIO52G23

GPIO53D25

GPIO54E24

GPIO55G24

GPIO56F24

GPIO57F30

GPIO58H29

SDA0H31

SCL0J30

SDA1H30

SCL1G31

UA0RXDBF31

UA0TXDBG30

EJTDIB30

EJTCKB32

EJTDOB31

EJTMSA32

EJTRSTA30

EJDINTB29

TMODE0H26

TMODE1H25

TMODE2H27

TMODE3J24

TMODE4H23

TMODE5J25

RSTSWBH22

TESTH24

NMIF25

10kRB906

EXT_XRST

EJ2TMS

EJ2TCK

EJ2TDI

EJ2TDO

EJ2DINT

EJ2TRST

EJ2TCK

EJ2TMS

EJ2TDI

EJ2TDO

MC-10121F1_DIPSW0

MC-10121F1_DIPSW1

EJ2TRST

EJ2DINT

MC-10121F1_DIPSW1

MC-10121F1_DIPSW0

EXT_XRST

3.3V

GND

RXD

TXD

DIPSW1

DIPSW0

SW3.3V

UX1RXDB

UA1TXDB

ICE1_TMS

ICE1_TCK

GND

ICE1_TDI

GND

GND

ICE1_TDO

ICE1_BKTG

ICE2_TMS

ICE2_TCK

ICE2_TDI

ICE2_TDO

ICE2_BKTG

ICE2_TRST

TMODE2

TMODE3

TMODE4

1A 1B 2Y GN

D

VCC 1Y 2B 2A

RESERVE

EXT_XRST

RESERVE

ICE1_TRST


IC101 (11/15)A/V OUT, HDMI, ETHERNET I/F, USB I/F

(NC)

GPIO/JTAG

9

D

E

1110 152 5

MB-127 BOARD (9/14)

K

3

I

05

F

1612

C

1 86

XX MARK:NO MOUNT

G

14

A

13

H

74

J

B

XX

XXXX

XX

XX

XXXX

XX

(JIG)

XX

MB-127(8/14)

MB-127(8/14)

MB-127(10/14)

MB-127(5/14)

MB-127(8/14)

MB-127(6/14)

MB-127(10/14)

MB-127(3/14)

(6/14)

MB-127

(11/14)

(5/14)

MB-127(14/14)

4-14

BDP-S360

4-14. MB-127 BOARD (IPIO) SCHEMATIC DIAGRAM (10/14) • See page 5-5 for printed wiring board.- Ref. No.: MB-127 board; 10,000 series -

RB7001

RB7003

R7005

XXR7018

R7002

R7014

XXR7010

R7019

R7009

RB7002

R7004

R7006

XXR7017

XXR7020

R7003

MC-10121F1_SW3.3V

R7021XX

XXR7016

C7001

R7008

XXR7001

RB7004

GND

DR_VCC33

JL7027

JL7043

JL7028

JL7040

JL7020

JL7013

JL7022

10kRB7007

JL7037

10kRB7008

JL7016

JL7039

JL7023

JL7002

10kRB7013

10kRB7010

JL7019

JL7038

JL7025

JL7001

JL7014

JL7042

JL7017

JL7026

JL7021

JL7044

JL7012

JL7035

10kRB7012

10kRB7011

JL7015

JL7024

JL7041

JL7018

JL7036

AOHTX

VODY3

VODC0

VODC4

VODY8

VOCLK

VODC6

VODC1

VOVSB

VOHSB

AOHBCK

VODY5

VODC5

VODC8

AOHBD1

VODY9

VODY7

VODC7

VODY0

VODC2

VODY4

VODC9

AOHBD0

VODY6

AOHMCK

AOHBD3

AOHBD2

AOHLRCK

VODY1

VODY2

VODC3

JL7034

R7036 R7037XX

JL7045

R7041XX

R7040

R7039 R7042

R7043XX

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31

32

33

34

35

36

37

38

39

40

41

42

43

44

45

46

47

48

49

50

CN7001

RB7009

JL7046

JL7047

JL7048

JL7049

JL7050

JL7051

JL7052

JL7053

JL7054

JL7055

JL7056

JL7057

JL7058

JL7059

JL7060

JL7061

JL7062

JL7063

JL7064

JL7065

JL7066

JL7067

JL7068

JL7069

JL7070

JL7071

JL7072

JL7073

JL7074

JL7075

JL7076

JL7077

10kRB7014

MC-10121F1-207-TA1-AIC101

PTEST00N7

PTEST01N6

PTEST02P9

PTEST03T15

PTEST04U16

PTEST05R8

PTEST06R9

PTEST07U14

PTEST08T8

PTEST09U15

PTEST10R7

PTEST11P8

PTEST12P7

PTEST13T16

PTEST14N8

PTEST15P13

PTEST16T9

PTEST17L7

PTEST18N13

PTEST19P14

PTEST20R17

PTEST21R16

PTEST22N15

PTEST23R15

PTEST24T17

PTEST25R14

PTEST26R13

PTEST27N14

PTEST28K7

PTEST29P15

PTEST30M7

TEST1U13

10kRB7015

_ATA0_D0

ATA0_D9

_ATA0_DA2

ATA0_D12

_ATA0_XDIOW

_ATA0_D9

_ATA0_DMARQ

_ATA0_D15

ATA0_XRESET

_ATA0_D11

_ATA0_D0

_ATA0_D3

_ATA0_D13

_ATA0_D5

_ATA0_D6

_ATA0_D7

_ATA0_D10

_ATA0_XDMACK

_ATA0_D10_ATA0_D9

_ATA0_D14

_ATA0_IORDY

_ATA0_XRESET

_ATA0_D1_ATA0_D8

_ATA0_D2

_ATA0_XDIOR

_ATA0_D7

ATA0_XDIOW

_ATA0_D6

_ATA0_D5

ATA0_INTRQ

ATA0_INTRQ

_ATA0_XCS0

_ATA0_DMARQ

_ATA0_XDMACK

ATA0_D8

_ATA0_INTRQ

_ATA0_DA1

ATA0_DA0

_ATA0_XDIOR

ATA0_D2

_ATA0_DA0

_ATA0_XDIOW

ATA0_D5

_ATA0_D15

ATA0_D0

ATA0_DMARQ

ATA0_XDIOR

_ATA0_XRESET

ATA0_D1

_ATA0_D14

_ATA0_IORDY

ATA0_XDMACK

ATA0_D15

_ATA0_D13

ATA0_D13

_ATA0_XCS1

_ATA0_D12

_ATA0_D4

ATA0_D4

ATA0_D14

ATA0_DMARQ

_ATA0_D11

_ATA0_D3

ATA0_D10

ATA0_D6

_ATA0_D2

ATA0_D3

_ATA0_D1

ATA0_D11

_ATA0_DASP

_ATA0_HIOCS16

_ATA0_PDIAG

ATA0_DASP_ATA0_DASP

_ATA0_HIOCS16

ATA0_PDIAG_ATA0_PDIAG

ATA0_DASP

ATA0_D7

ATA0_PDIAG

ATA0_XCS0

ATA0_XCS1

ATA0_DA2

ATA0_DA1

ATA0_DA0

ATA0_XDMACK

ATA0_IORDY

ATA0_XDIOW

ATA0_IORDY

ATA0_XDIOR

ATA0_D5

ATA0_D10

ATA0_D1

ATA0_D11

ATA0_D0

ATA0_D6

ATA0_D14

ATA0_D2

ATA0_D9

ATA0_D7

ATA0_D3

ATA0_D13

ATA0_D15

_ATA0_DA0

ATA0_XCS1

ATA0_DA2_ATA0_DA2

_ATA0_XCS1

_ATA0_D4

_ATA0_D12

_ATA0_D8 ATA0_D8

ATA0_D12

ATA0_D4

_ATA0_XCS0

_ATA0_DA1 ATA0_DA1

ATA0_XCS0

_ATA0_INTRQ

ATA0_XRESET

CS1

DA1

IORDY

DD1

DD3

DD10

DA2

DIOR

CS0

DD9

DD5

DMARQ

DD0

INTRQ

DD6

DD8

DD11

DD13

DD4

GND

DD12

DD15

DD2

DASP

DMACK

RESET

SW3.3V_PULLUP

CBLID/PDIAG

DIOW

DA0

DD7

DD14

GND

GND

GND

GND

GND

GND

GND

GND

GND

GND

GND

GND

GND

GND

GND

GND

GND

GND

GND


(12/15)IC101MAIN SYSTEM CONTROL, DSP, SATA I/F, MEMORY CONTROL,

IPIO

9

D

E

11102 5

MB-127 BOARD (10/14)3

05

F

12

C

1 86

XX MARK:NO MOUNT

G

14

A

13

H

74

B

(NC)

MB-127(9/14)

XX

XX

XX

XX

XX

XX

XX

XX

XX

XX

XX

XX

XX

XXXX

XX

XX

XX

XX

XX

(3/14)MB-127

(12/14)MB-127

4-15

BDP-S360

4-15. MB-127 BOARD (ETHERNET) SCHEMATIC DIAGRAM (11/14) • See page 5-5 for printed wiring board.- Ref. No.: MB-127 board; 10,000 series -

NO MARK:PB MODE

3.3

0

3.3

3.3

3.3

3.3

3.3

1.2

3.3

0

0

0

0

1.6

0

0

03.

3 0 0 0 0

1.8

3.3

3.3

3.3

00003.3

10

0.01C1113

0.01C1111

0.1C1115

0.01C1109

0.01C1117

4.7C1110

C111810

10k

R11

13

XXR1122

FB1101

FB1102

GND

SW3.3V

1 2 3 4 5 6 7 8

10

11

12

13

14

15

16

17

2021222324252627

29

30

31

32

33

34

35

36

9

18

19

28

LAN8700C-AEZGIC1101

nIN

T/TX

_ER

_TXD

4

MD

C

CR

S

MD

IO

nRST

TX_E

N

VDD

33

VDD

_CO

RE

LINK

ACTIVITY

FDUPLEX

XTAL2

REFCLK

RXD3

RXD2

RXD1

RX_

CLK

RX_

ER

TXC

LK

TXD

0

TXD

1

VDD

IO

TXD

2

TXD

3

TXP

VDDA3.3

RXN

RXP

VDDA3.3

EXRES1

VDDA3.3

CRS_DV

SPEE

D10

0

RXD0

RX_

DV

TXN

10kR1123

XXR1111

XXR1115

4.7C1114

10kR1135

10kR1134

10kR1133

XXR1132

XXR1131

XXR1130

XXR1129

10kR1110

10kR1108

10kR1118

OEVDD

OUT GND

50MHzX1101

0R1124

0R1128

0.01C1116

100

R11

19

0.1C1119

MC-10121F1_XRST

R1139 47

R1140XX

1.5kR1142

1.5kR1141

MC-10121F1_SW3.3V

JL1106

JL1107

JL1108

JL1109

JL1110

JL1111

JL1112

JL1113

JL1114

JL1115

D1101XX

XXR1136

JL1116

47R1137

47R1138

0.01C1112

D1105XX

0.01C1106

D11

03XX

XXC

1104

49.9

R11

06

D11

04XX

0.022C1101

L1102

0.5%10k

R1104

D1102XX

JL1104

JL1101

R11

0749

.9

JL1105

4 1

23

4 1

23

L1101

49.9R1103

XXC

1103

JL1103

XXC

1102

0.01C1108

XXC1105

49.9

R11

0510

R1101

0.01C1107

0.5%2.4k

R1102

JL1102

FB1103

JL1117

JL1118

JL1119

JL1120

JL1121

MC-10121F1-207-TA1-AIC101

ETTXD0V31

ETTXD1V30

ETTXENV32

ETMDCT32

ETMDIOT33

ETREFCLKT34

ETCRSU33

ETRXD0U30

ETRXD1U31

ETRXERU29

1

3

5

2

7

8

6

4

8PCN1101

ETTXD1

ETREFCLK

ETCRS

ETRXD0

ETRXD1

ETRXER

ETMDIO

ETTXD0

ETTX

D1

ETTX

D0

ETR

XER

MC-10121F1_XRST

ETTXEN

ETRXD0

ETRXD1

ETM

DC

ETM

DIO

MC

-101

21F1

_XR

ST

ETMDC

ETC

RS

ETTX

EN

ETREFCLK

IC101 (13/15)MAIN SYSTEM CONTROL, DSP, SATA I/F, MEMORY CONTROL,


ETHERNET PHY

IC1101

LAN (100)

ETHERNET

9

D

E

11102 5

MB-127 BOARD (11/14)3

05

12

C

1 86

XX MARK:NO MOUNTA

74

B

F

G

(3/14)MB-127

(9/14)MB-127

13

4-16

BDP-S360

4-16. MB-127 BOARD (RF SDRAM) SCHEMATIC DIAGRAM (12/14) • See page 5-5 for printed wiring board.- Ref. No.: MB-127 board; 10,000 series -

SA_INT

JL1207

INSW_BU

0.1C120810k

R1208

SA_DRV_A

0.1C1209

SA_DRV_B

2.2kR1209

2.2kR1210

0.1C1210

LDEN

DRVCTL2

DRVCTL1

C1220

5

4 3

2

1

IC1220

R1221

JL1221

TRAYOUT

0.001C1222

JL1224

JL1225

JL1226

JL1227

JL1228

JL1229

JL1230

TRAYIN

0.1C1245

R1248XX

R1250XX

0.01C1255

0.01C1256

0.01C1252

R1260 XX

SDCK

SEN_LDD

SDIO

4.7C1281

4.7C1282

XXC1296

4.7C1288

XXC1297

XXC1285

1 2 3 4 5

678910

11

SM8170BD-G-ELIC1280

VIN

2

LDO

UT

GN

D

END

CO

ENLD

OPG

NDLx

VIN

1FB

RES

ETNFin

CL1280

FB1282XX

XXC1291C1293

0.01 XXC1292

DR_VCC15

C12950.01 XX

C1298

10kR1223

0.1C1223

10kR1231

10kR1212

DR_SW5V

CL1270

FB1260XX

FB1270XX

DR_SW12V

DR_SW12V

DR_SW5V

0.1C1231

CL1290

LDD_RST

PI_CONT

1

2

3

4

5

6

7

8

9

CN1235

C1221

C1251XX

R1247XX

R1261 10k

R1266 XX

XXR4101

XXR4102

XXR4103

XXR4104

XXR4105

XXR4106

XXR4107

XXR4108

XXR4109

XXR4110

XXR4121

XXR4122

XXR4123

XXR4124

XXR4125

XXR4126

XXR4127

XXR4128

XXR4129

XXR4130

R1263 10k

R1262 XX

RB1220

22RB1255

22RB1256

22RB1253

22RB1254

22RB1257

22R1259

FB1287XX

FB1298XX

DR_VCC33

XXR1293

DRVCTL3

1

2

3

4

5

6

7

8

CN1220

GND1XX

ATA_PCONT21k

R1284

FB1296XX

FB1297XX

FB1291XX

FB1292XX

FB1251XX

XXR4131

XXR4132

JL1239

JL1240

JL1241

JL1242

JL1243

JL1244

JL1245

JL1246

JL1247

JL1248

JL1249

JL1250

JL1251

JL1252

JL1253

JL1254

JL1255

JL1256

JL1257

JL1258

JL1259

JL1260

JL1261

JL1262

JL1263

JL1264

JL1265

JL1266

JL1267

JL1268

JL1269

JL1270

JL1271

JL1272

JL1273

JL1274

JL1275

JL1276

JL1277

JL1278

JL1279

JL1280JL1281

JL1282

JL1283

JL1284

JL1285

JL1286

JL1287

JL1288

JL1289

JL1290

JL1291

JL1292

JL1298

JL1300

JL1301

JL1302

JL1303

JL1304

JL1305

JL1306

JL1208

JL1307

RB12510

RB12520

RB12580

RB12590

10R1258

100pC1253

100pC1254

100pC1258

100pC1257

1C1263

1C1264

1C1259

1C1268

10C1286C1287

2.2

16V100

C1272

16V100

C1265

25MHzX1201

0.001C1224

XXR1244

L12872.2uH

10V

C121522

10V

C123322

0.001C1279

0.001C1267

0.001C1271

0.001C1273

0.001C1266

0.001C1261

0.001C1262

XXR1243

XXR1245

XXR1242

XXR1241

R12712.2k

R12722.2k

XXR1232

FB1272XX

FB1265XX

FB1271XX

FB1273XX

FB1266XX

FB1261XX

FB1262XX

XXR1256

GND

54

4510

1

2

3

4

5

6

7

8

9 46

47

48

49

50

51

52

53

3520

40

4213

17

44

43

41

39

38

37

3619

18

16

11

12

14

15

34

28

29

30

31

32

33

21

22

23

24

25

26

27

K4S641632N-LC60IC1251

VDD

DQ0

VDDQ

DQ1

DQ2

VSSQ

DQ3

DQ4

VDDQ

DQ5

DQ6

VSSQ

DQ7

VDD

DQML

WE

CAS

RAS

CS

BA0

BA1

A10

A0

A1

A2

A3

VDD VSS

A4

A5

A6

A7

A8

A9

A11

N.C.

CKE

CLK

DQMH

N.C.

VSS

DQ8

VDDQ

DQ9

DQ10

VSSQ

DQ11

DQ12

VDDQ

DQ13

DQ14

VSSQ

DQ15

VSS

R1246XX

MC-10121F1-207-TA1-AIC101

X1K1

X2J1

VDD15OSCM9

GNDOSCN9

PA0G6

PA1H7

PA2G5

PA3H6

PA4J7

PA5K8

PA6J6

PA7J5

PB0/SW1D12

PB1/SW2D13

PB2/SW3E13

PB3/SW4E12

PB4K5

PB5L8

PB6P17

PB7N17

PC0J4

PC1K2

PC2L2

PSI0P6

PSI1M5

PSI2N5

PSI3M4

PSI4N4

PSI5M3

PSI6P5

P50R6

P51R2

P52P2

P53N2

P54R3

P55R4

P56P3

P57P4

SDCS3BG4

SDCS2BH5

SDCS1BG3

SDCS0BH4

SDCKG2

SDIOH3

MD0K9

MD1J9

MD2J10

MD3G17

MD4G16

MD5J14

MD6H15

MD7H14

MD8F16

MD9G15

MD10J15

MD11F17

MD12H11

MD13J11

MD14L9

MD15J8

MA0D16

MA1D14

MA2D17

MA3D18

MA4C16

MA5E17

MA6D15

MA7E14

MA8E16

MA9F13

MA10E15

MA11F15

LDQMJ12

UDQMJ13

WEBH12

MCLKOUTH13

CASBG12

MCKEG13

RASBG14

MBA0F14

MBA1F12

SFSIO3J3

SFSCKL4

SFSIO0K4

SFSIO2J2

SFSIO1L3

SFCS0BK3

8 7 6 5

4321

MX25L1635DM2I-12GIC1245

CS

SO/S

IO1

W/S

IO2

GN

DSI

/SIO

0

SCK

HO

LD/S

IO3

VCC

0.1C1203

1kR1237

1kR1236

1kR1234

1kR1235

10kR1211

XXC1206

XXC1204

XXC1205

0.5%120k

R1289

0.5%180k

R1287

XXR1285

9pC1289

MA[0]

MA[1]

MA[2]

MA[3]

MA[10]

MBA1

MBA0

RAS/

MCKE

CAS/

MCLK

WE/

UDQM

LDQM

MA[1]

MA[2]

MA[3]

MA[4]

MA[6]

MA[7]

MD[0]

MD[1]

MD[2]

MD[3]

MD[4]

MD[5]

MD[6]

MD[7]

MD[8]

MD[9]

MD[10]

MD[11]

MD[12]

MD[13]

MD[14]

MD[15]

WE/

LDQM

CAS/

RAS/

MBA1

MBA0

MA[5]

MA[7]

MA[4]

MA[6]

MA[9]

MA[11]

MA[8]

MD[0]

MD[1]

MD[2]

MD[3]

MD[4]

MD[5]

MD[6]

MD[7]

MD[15]

MD[14]

MD[13]

MD[12]

MD[11]

MD[10]

MD[9]

MD[8]

MA[5]

MA[8]

MA[9]

MA[10]

MA[11]

MA[0] UDQM

MCLK

MCKE

TXD

SDA2SO

RXD

SDACLK

3.3V

GND

SDA1SO

GND

SDAENZ

DCK

DDO_2

DDO_1

GND

3.3V

DDI

DRST

DMS

IC101 (14/15)MAIN SYSTEM CONTROL, DSP, SATA I/F, MEMORY CONTROL,


IC125164M SDRAM

IC124516M S-FLASH

IC1280+1.5V/+3.3V

(NC)

RF SDRAM

9

D

E

1110 152 5

MB-127 BOARD (12/14)3

I

17

05

F

1612

C

1 86

XX MARK:NO MOUNT

G

14

A

13

H

74

J

BXX

XX XX

XX

XX XX

XX

(NC)

REGULATOR

(13/14)MB-127

(13/14)MB-127

(13/14)MB-127

(3/14)MB-127

MB-127(13/14)

MB-127(14/14)

(13/14)

MB-127(10/14)

MB-127(13/14)

4-17

BDP-S360

4-17. MB-127 BOARD (DRIVE/RF) SCHEMATIC DIAGRAM (13/14) • See page 5-5 for printed wiring board.- Ref. No.: MB-127 board; 10,000 series -

DR_VCC15

GND

0.01C4262

0.01C4263

0.01C4264

0.01C4265

0.01C4266

DR_VCC33

0.01C4272

0.01C4273

0.01C4274

2.2kR1310

0.01C1314

XXC1312

XXC1309

4.7C1315

XXC1327

0.01C1335

0.01C1321

R1305 104.7kR1303

0.01C1326

0.001C1305

C13

530.

01

LDEN

R13

52XX

C13560.022

DR_SW12V

C13590.1

4.7kR4255

0.1C1332

0.1C1331CL1331

CL1332

0.1C1328

0.1C1329CL1329

CL1328

CL1363

CL1364

CL1365

CL1366

CL1367

CL1302

0.5%10k

R1301

0.5%15k

R1302 XXC1302

CL1301

CL1368

4.7C1369

0.033C1370

0.1C1371

0.1C1372 JL1373

100pC1375

100pC1374

10C1376

0.01C1301

CL1380JL1381

0.01C1384

0.01C1385

0.33C1386

0.33C1387

3900pC1388

0.047C1389

JL1391

JL1392

DR_VC_165

C13930.01

FDRV2/LDDRV

2200pC1395

SA_INT

PI_CONT

SDCK

SEN_LDD

SDIO

LDD_RST

CL4

213

TRAY

IN

DRVCTL2

0.1C4209

XXR4238

CL4

218

INSW

_BU

DR_SW12V

CL4

243

10k

R42

12

XXC

4222

0.1C4252

0.00

1C

4237

R4217470

0.01

C42

05

CL4

217

XXC

4224

XXR4235

0.01C4250

10k

R42

14

TRAY

OU

T

0.1C4230

R4218470

0.1

C42

21

1/2W

0.33

R42

52

CL4

215

0.01

C42

03

DR_SW5V

DRVCTL1

CL4

212

0.01

C42

01 10k

R42

25

XXC

4223

CL4

214

0.1C4207

0.00

1C

4235

R4201XX

R4202XX

100p

C42

46

100p

C42

45

CL1325

CL1324

CL1323

CL1322

CL1320

CL1319

CL1318

CL13170.01C1377

10C1378

XXC4244 C4228

10

10C1316

10C1303

C139410

12345CN4261

5P123456789101112131415161718

18PCN4201

6.2kR1362

470p

C42

53

IC1352XX

1

VCC

2

EN

3

OU

T

4

ADJ

5

GN

D

6

GN

D

0.01C4268

0.01C4276

0.01C4282

0.01C4283

0.01C4285

0.01C4286

0.01C4292

0.01C4293

0.001C4284

0.001C4294

R4208XX

R4251XX

R4249XX

R4248XX

CL4

237

CL4

236

1C4287 JL

4234

R4233XX

R4209XX

XXR4234

R4230XX

XXR4244

JL42

33

1C1361

10C1382

100pC4247

MGND1XX

1 2CN4262

XX

1

2

CN1302XX

SL4261

FB1301XX

R1334XX

10k

R42

58

10k

R42

59

JL1374

JL1375

JL1376

JL1377

JL1378

JL1379

JL1380

JL1382

JL1383

JL1384

JL1385

JL1386

JL1387

JL1388

JL1389

JL1390

JL4235

JL4236

JL4237

JL4238

JL4239

JL4240

JL1393

JL4241

JL4242

JL4243

JL4244

JL4245

16V

C1350100

C13

510.

1

16V

C1352XX

10C

4295

R1359150k

0.5%

R135527k

0.5%

R1354220k

XXFB4284

0.001C4220

0.00

1C

4226

0.00

1C

4225

C42271

XXC4151

XXC4152

XXC4160

XXC4161

XXC4162

XXC4163

XXC4164

XXC4165

XXC4166

XXC4167

XXC4168

XXC4169

XXRB1317

R130810k

0.5%

XXRB1322

XXRB1328

XXFB1393

C1354XX

C1355XX

FB1326 XX

FB1321 XX

FB1314XX

FB1311 XX

FB1310 XX

FB4225XX

C13

57XX

4.7kR1311

SL4254

GND2XX

R42

06XX

33k

R42

22

33k

R42

23

33k

R42

24

62kR4232

0.5%

62kR4231

0.5%

68kR4228

0.5%

75kR4229

0.5%

IC4201BD7986EFV-E2

1

HU

+

2

HU

-

3

HV+

4

HV-

5

HW

+

6

HW

-

7

VCC

8

LDIN

9

LDO

-

10

LDO

+

11

AGN

D

12

TKO

-

13

TKO

+

14

TLO

+

15

TLO

-

16

CH

G_C

17

FCO

-

18

FCO

+

19

Pick

CTL

20

ICTL

21

AVM

22

FCIN

23

TLIN

24

TKIN

25

VC

26

DVC

C

27

DG

ND

28

SAIN

1

29

SAIN

2

30

SL/S

AVM

31

SLIN

1

32

SLIN

2

33

SLD

ET

34

SLD

ETO

UT

35

SAO

1+

36

SAO

1-

37

SAO

2+

38

SAO

2-

39

SLO

1+

40

SLO

1-

41

SLO

2+

42

SLO

2-

43

SL/S

AGN

D

44

SPG

ND

45

U

46

V

47

W

48

CTL

2

49

CTL

1

50

SPC

NF

51

FG

52

SPVM

53

BTH

C

54

SPIN55 Fi

n

R42190

R13090

CL4251

MC-10121F1-207-TA1-AIC101

VDD15RVADC12

VDD15WBLADE4

GND_WBLADE5

AVDD15C10

AVDD15C13

AVDD15F2

AVDD15F3

AVDD15C8

AVDD33B5

AVDD33C3

AVDD33F6

AVDD33G7

AVDD33C9

AGNDA8

AGNDB3

AGNDB4

AGNDC6

AGNDC14

AGNDF4

AGNDF5

AGNDC7

AGNDC11

DVDD33G1

DVDD33N3

DVDD33E11

DVDD33C17

DVDD33M6

DVDD15H2

DVDD15L5

DVDD15G11

DVDD15K6

DGNDC18

DGNDD11

DGNDF11

DGNDH1

DGNDL1

DGNDL6

DGNDM8

TDRVF1

FDRVE1

MDRVD1

SDRV2C2

SDRV1D2

FGM2

RFPA7

RFNA6

RFP2A5

RFN2A4

CEQB13

REQB14

RFEQOMB17

RFEQOPA17

MON1/RFP4A16

MON2/RFP5B16

MON3/RFP6C15

ADIN0/RFP7A15

ADIN1B15

CAGC1A13

CAGC2A14

AA12

BB11

CB12

DA11

EA9

FA10

G/FOPB9

CBCD6

CADE7

RFTST3/RFP3D10

AGCINPE10

AGCINNF10

RFONE9

RFOPD9

CREGB6

VREFIOB7

REF16D8

H/FOMB10

RFTSTIN1B8

RFTSTIN2D7

REF075E8

CBHWBL/CIDF9

CBHLPPG10

CBCOF8

CADOG9

CWHPH10

CWAGCE6

RLDF7

FPDVINPC5

FPDVINND5

FPDVINP2C4

FPDVINN2D4

RFTST1/SWRF1G8

RFTST2/SWRF2H9

DAOUT2D3

DAOUT0E2

DAOUT1E3

WALPF1H8

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31

32

33

34

35

36

37

38

39

40

41

42

43

44

45

CN130145P

BD35630HFV-TRIC1351

1

2

34

5

6

7

0.001C1310

0.01C1311

1kR1335

R13561k

0.5%

R135868k

XXR1357

XXR4243

SA_DRV_A

SA_DRV_B

DRVCTL3

SA_B+

FD2

SA_A-

TD

FD1

TR

FR2

FR1

SA_B-

SA_A+

TDRV

FDRV1

MDRV

SL_DRV_B

SL_DRV_A

FDRV

1

HW

-

FD1

HW

+

HV-

FR1

HV+

TD

HU

-

HU

+

TR

U

FR2

V

LD+

FD2

W

LD-

HW

-

HW

+

HV-

SL_B

-

SL_B

+

HV+

V

SL_A

+

TDRV

HU

-

SL_A

-

HU

+

SA_B+

SA_A-

LD+

LD-

BD_RF+

BD_RF-

DVD_RF+

DVD_RF-

OP_A

OP_B

OP_C

OP_D

OP_E

OP_F

OP_G

DR_VC_PD

BD_RF+

DVD_RF+

BD_RF-

OP_H

OP_G

OP_F

OP_E

OP_A

OP_B

OP_C

OP_D

DVD_RF-

FG

FDRV

2/LD

DRV

DR

_VC

_165

UW

SL_A

-

SL_A

+

SL_B

-

SL_B

+

SA_B-

DR_VC_PD

OP_H

MD

RV

FG

SL_DRV_B

SL_DRV_A

SA_A+

SDIO

PI_CONT

FD1

FR2

B

3.3V

E

F

THERMO

A

SA_A-

FD2

C

SA_A+

BD_RF-

D

GND

DVD_RF+

DVD_RF-

SEN_LDD

SA_B-

SA_INIT

5.0V

GND

VC_PD

TR

8.0V

TEST_V

BD_RF+

LDEN

H

SA_B+

SCLK

G

FR1

XRST

5V_PD

TD

/BHV+

HW

+

/AHU

-

HU

+

HB+

w SIG

GN

D

BINSW

V FGN

D

HB-

GN

D

A LD+

TRAY

-OU

T

HV-

LD-

U TRAY

-IN

HW

-

FGN

D

FGN

D

FGNDFGND

Vo

FB

GNDEN

NC

VCC

GND

GND

GND

GND

GND

GND

GND

A/V OUT, HDMI, ETHERNET I/F, USB I/FMAIN SYSTEM CONTROL, DSP, SATA I/F, MEMORY CONTROL,

(15/15)IC101

+8V REGULATOR

IC1351

MOTOR DRIVE

IC4201

(NC)

18

DRIVE/RF

9

D

E

1110 152 5

MB-127 BOARD (13/14)

K

3

I

17

05

F

1612

C

1 1986

XX MARK:NO MOUNT

G

14

A

13

H

L

74

J

B

DRIVEBD

DRIVEBD

MB-127(12/14)

MB-127

MB-127(12/14)

(12/14)

MB-127(12/14)

MB-127(12/14)

(NC)

MB-127(12/14)

DRIVEBD

MB-127(12/14)

4-18

BDP-S360

4-18. MB-127 BOARD (IFD) SCHEMATIC DIAGRAM (14/14) • See page 5-5 for printed wiring board.- Ref. No.: MB-127 board; 10,000 series -

NO MARK:PB MODE

0

0

12 0 0 0

0 0

3.2

3.3

3.3

3.3

3.2

3.3

3.3

3.3

3.3

0

0

3.3

3.3

0.2

3.3

3.3

3.3

3.3

3.2

3.1

3.3

3 0 0 0 0 0 03.3

3.3

3.3

3.3

3.3

3.3

2.4

2.6

0

0

3.3

3.2

3.3

3.3

5.7

XXX1402

0.1C1410

JL14

12

JL14

13

JL14

23

JL14

24

JL1432

100R1421

100R1450

XXR1449

100R1446

R143910k

R1441XX

0.1C1417

0.1C1416

0.1C1415

0.1C1413 0.1

C1414

XXC1404

XXC1403

XXR1401

10kR1430

0.1C1408

0.1C1411

0.1C1412

PCONT2

PCONT4

ATA_PCONT

PCONT3

PCONT1

10k

R14

32

10k

R14

27

ATA_PCONT2

SYSCON_RST

IF_SCK

IF_SDI

IF_SDO

START_BIT

SYSCON_REQ

CEC

R1424XX

10kR1459

KEY0

0.1C1419

1

2

3

4

5

6

7

7PCN1402

100kR1462

1

2

3

4

5

XXCN1401

0.1C1409

4.7kR1407

0.5%2.7k

R1448

10kR1438

100kR1464

22kR1409

220kR1465

27kR1406

R144210k

220kR1408

100R1414

S1401

C1418XX

100kR1443 R1445

100k

XIF_CS

4

3

1

2

IC1402XX

100R1456

100kR1420

100kR1422

3.3kR1419

4

3

1

2

PST8250ULIC1404

VOUT

VDD NC

GND

UNSW12V

1C1401

0.5%2k

R1403

1

2

3

CN14033P

0.5%560

R14051

C1402

0.5%680

R1404

0.5%5.6k

R1402

UNSW3.3V

UNSW6V

GND

XXX1401

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17 18 19 20 21 22 29282726252423 30 31 32

33

34

35

36

37

38

39

40

41

42

43

44

45

46

47

48

49505152535455565758596061626364

R5F212A7SNA18FPIC1403

1 2 3 4 5

PQ200WNA1ZPHIC1401

1kR1410

RT3N11M-TP-1Q1408

10C1407

XXR1472

TH1401

E_VBUS_DET

SW3.3V

XXR1411

XXR1415

XXR1416

XXR1431

XXR1466

XXR1435

JL1440

JL1441

HDMI_PCONT

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

17PCN1404

1

2

3

4

5

6

7

8

9

10

11

12

13

14

CN1405XX

XXR1467

XXR1475

XXR1476

XXR1477

XXR1478

XXR1479

10kRB1401

100RB1402

R1480XX

XXR1481

10kR1482

10kR1483

JL14

42

JL1443

XXR1484

Q1409XX

XXR1485

XXR1486

XXR1487

100RB1403

100R1418

100R1412

100R1417

100R1413

0.1C1420

R1488XX

PCONT4

SYSCON_RST

SYSCON_REQ

XIF_CS

FLD

_PC

ON

T

ATA_PCONT

FAN_DET1

START_BIT

IF_SDI

IF_SDO

IF_SCK

XIF_CS

ATA_PCONT

LED_DIMMER

FAN_CONT0

FAN_CONT1

FAN_CONT2

FLD_PCONT

FLD_STB

FLD_SDO

SIRCS_IN

KEY1

KEY2

KEY3

LED_DIMMER

XHUB_RST

P_CON_F5V

P_CON_H3.3V

P_CON_W5V

RF_ON/OFF

EXT_POW_ON/OFF

FLD_SCK

EXT_POW_ON/OFF

RF_ON/OFF

P_CON_W5V

P_CON_H3.3V

P_CON_F5V

XHUB_RST

VBUS_DET

FAN

_CO

NT1

ATA_

PCO

NT2

SYSCON_RST

START_BIT

PCO

NT1

PCO

NT4

SYSCON_RST2

SYSCON_RST2

FLD

_SD

O

FLD

_STB

FLD

_SC

K

VBUS_DET

FAN

_DET

1

XHP_

IN

FAN

_CO

NT0

FAN

_CO

NT2

KEY0

KEY1

KEY2

SYSCON_REQ

KEY3

IF_S

DO

PCO

NT3

IF_S

DI

SIR

CS_

IN

IF_S

CK

PCO

NT2

KEY0

XHP_IN

PCONT2

PCONT3

PCONT1

ATA_PCONT2

ATA_PCONT1

KEY1

XCOUT

NC

KEY2FLD_STB

SYSCON_RST

AVSS

START_BIT

MODE

LED_DIMMER

TXD1

XIF_CS

PFAIL

RXD1

KEY3

/RESET

NC

AVCC

NC

XCIN

NC

XIN

XOUT

SYSCON_REQ

SYSCON_RST2

IF_S

DI

CEC

PCO

NT1

HD

MI_

PCO

NT

PCO

NT4

IF_S

CK

PCO

NT2

SIR

CS_

IN

IF_S

DO

FLD

_SD

O

XHP_

IN

FAN

_DET

1

KEY0

VCC

VSS

FLD

_SC

K

33V_

det

FAN

_CO

NT2

FAN

_CO

NT1

DES

T1

TEM

P

VREF

ADSP

_BO

OTC

FG

FLD

_PC

ON

T

FAN

_CO

NT0

MODE

GND

VCC

NC

IF_RXD

IF_TXD

RESET

NC

MODE

RESET

VCC

GND

NC

GND

VCC

OUT

PCO

NT3

NC

NC

GND

FAN_DET

FAN_OUT

KEY 2

FR_6V

GND

LED_DIM

KEY 1

GND

GND

IT_3.3V

FLD_STB

LED_DT

KEY 3

FLD_PCONT

GND

LED_CK

FR_6V

GND

SIRCS

Vin

CO

NT

Vout

ADJ

GN

D

GND

SW3.3V

XHUB_RST

P_CON_F5V

P_CON_H3.3V

P_CON_W5V

RF_On/Off

Ext_Pow On/Off

GND

GND

GND

SW3.3V

E_VBUS_DET

PCON_W5V

RF_ON

EXT_POW_ON

XHUBRSTPCON_F5V

PCON_H3.3V

VBUS_DET NC

NC

ATA_

PCO

NT2

VBUS_DET

IC1404P FAIL

IC1403SUB SYSTEM CONTROL

IC1401FAN CONTROL

IFD

9

D

E

1110 152 5

MB-127 BOARD (14/14)

K

3

I

17

05

F

1612

C

1 86

XX MARK:NO MOUNT

G

14

A

13

H

L

74

J

B

BOARD

(SEE PAGE 4-4)

FR-301

CN701

(NC)

XX

FAN SPEED CONTROL

(3/14)MB-127

(6/14)MB-127

MB-127(3/14)

M(FAN)M1401

(NC)

WRITTERFLASHIFCON

MB-127(3/14)

MB-127(12/14)

MB-127(9/14)

MB-127(7/14)

(8/14)

(3/14)MB-127

(7/14)

4-19

BDP-S360

4-19. USB-014 BOARD (USB CONNECTOR) SCHEMATIC DIAGRAM - Ref. No.: USB-014 board; 20,000 series -• See page 5-7 for printed wiring board.

JL361

JL362

JL3631

2

3

4

5

CN3625P

VDR361XX

1

2

3

4

4PCN361

GND

VBUS

D-

D+

GND

USB CONNECTOR

2

USB-014 BOARD31

XX MARK:NO MOUNTA

BCN602

BOARD

(SEE PAGE 4-10)

(6/14)

MB-127

05

EXT

4-20E

BDP-S360

4-20. WAVEFORMS

2 IC808 8 (SYIN)

0.5 V/DIV, 20 s/DIV

3 IC808 0 (YIN)

0.5 V/DIV, 20 s/DIV

4 IC808 qs (PBIN)

0.5 V/DIV, 20 s/DIV

9 IC808 wk (VOUT)

1.0 V/DIV, 20 s/DIV

8 IC808 wd (YOUT)

1.0 V/DIV, 20 s/DIV

6 IC808 ql (PROUT)

0.5 V/DIV, 20 s/DIV

5 IC808 qf (PRIN)

0.5 V/DIV, 20 s/DIV

0 IC1101 qf (REFCLK)

1.0 V/DIV, 10 ns/DIV

1 IC808 3 (SCIN)

0.5 V/DIV, 20 s/DIV

7 IC808 wa (PBOUT)

0.5 V/DIV, 20 s/DIV

H0.8 Vp-p

H1.0 Vp-p

H1.0 Vp-p

H0.7 Vp-p

H0.7 Vp-p

H1.4 Vp-p

H1.4 Vp-p

H2.0 Vp-p

H2.4 Vp-p

50 MHz4.0 Vp-p

MB-127 BOARD

5-1

BDP-S360SECTION 5

PRINTED WIRING BOARDS

5-1. THIS NOTE IS COMMON FOR PRINTED WIRING BOARDS

2 1

3

2 1

3

2 1

3

345

21

123

654

EB

C

31

55

2

46

123

54Transistor Diode

• : Uses unleaded solders.• : Pattern from the side which enables seeing. (The other layers’ patterns are not indicated)

• Through hole is omitted.• There are few cases that the part printed on diagram isn’t mounted

in this model.• : panel designation• Chip parts.

Caution:Pattern face side: (SIDE B)Parts face side:(SIDE A)

Parts on the pattern face side seen from the pattern face are indicated.Parts on the parts face side seen from the parts face are indicated.

5-2

BDP-S360

There are a few cases that the part isn’t mounted in this model is printed on this diagram.

: Uses unleaded solder.

5-2. FL-193 BOARD (SWITCH) PRINTED WIRING BOARD • See page 2-4 for circuit boards location.- Ref. No.: FL-193 board; 20,000 series -

12

S331CN331A

1 205

1-878-084- 11

FL-193 BOARD (SIDE A)

A

12

05

1-878-084- 11

FL-193 BOARD (SIDE B)

FL-193 BOARD (SIDE A)

CN331 A-1

5-3

BDP-S360



5-3. FR-301 BOARD (FL DRIVER) PRINTED WIRING BOARD (SIDE A) • See page 2-4 for circuit boards location.- Ref. No.: FR-301 board; 20,000 series -

B E

B E

1 17

23332234

1244

1 11

BE

B E

BE

BE

BE

BE

Q703

Q704

Q706

Q707

Q708

Q709

Q710Q711

PS701R7

01

R702

R704

R705

R706

R707

R712R713

R714 R715R716 R7

17

R718R719

CN701

R720 R721

C701C702

C707

C708

C709 C710

C711

C713

C714C715

C716C717

C718

C719C720

C721

D701

D703

D704

D705

D706

D707

D708

IC702

FR-301 BOARD (SIDE A)

1-878-083-

11

A

1 2 3 4 5 6 705

B

D701, 708BLU-RAY DISC

INDICATOR

FR-301 BOARD (SIDE A)

CN701 B-3

D703 A-4D704 A-4D705 A-3D706 A-4D707 A-3

IC702 A-6

Q703 A-2Q704 A-2Q706 A-2Q707 A-2Q708 A-7Q709 A-7Q710 B-7Q711 B-7

5-4

BDP-S360



5-4. FR-301 BOARD (FL DRIVER) PRINTED WIRING BOARD (SIDE B) • See page 2-4 for circuit boards location.- Ref. No.: FR-301 board; 20,000 series -

L701

C703C704

C705

C712

S701

S702S703

IC701 T701

124293132

ND701

1 110

5

32

FR-301 BOARD (SIDE B)

1-878-083- 11

A

123456705

B

xB

Z

FR-301 BOARD (SIDE B)

IC701 A-4

5-5

BDP-S360



5-5. MB-127 BOARD (MAIN) PRINTED WIRING BOARD (SIDE A) • See page 2-4 for circuit boards location.- Ref. No.: MB-127 board; 10,000 series -

A BC

RB7008

X1401

R804

5

PS80

2

X140

2

PS803

PS804

R404

C131

0

R405

C131

1C1312

RB7010

C131

4

R409

RB7011

CN4201

C1315 RB1251

RB7012

RB1252

C1316

RB7013

RB1253

R217

RB1254

R218

R219

RB1255

D1101

R601

R805

1

RB1256

R602

R805

2

RB1257

R8053

RB1258

R8054

R604

R8055

RB1259

R1101

R605

R805

6

R220

R608

C132

1

R609

R801

R802

C132

6

R803

C1327

R804

C1328

R610

C1329

R611

R130

3R1110

R130

5

R809

R1113

R1308

C1331

R1309C1332

R810

R811

CN601

CN602

R131

0

R815

R816

R817

R818

PT001

R819

PT002

PT003

PT004

CN801

PIA001

PT005

PT006

CN802

R820

R822

R823

R824

R630

R4201

R631

R826

R4202

R632

C1350

R638

C135

1

R639

C1352

R1136

C1353

R831

C135

6

C135

7

R834

C1359

C411X401

C413

C607

R837

R1334

C608

R4217

R4218

C801

C136

1

C804

C610

C4245

X601

C4246

R843

C4247

C614

C1369

C617

C618

C619

C137

0

C810

C238

R850

C620

R851

CN4261

C621

C815

C816

CN4262

C622

C817

C623

C818 R854

R855

R1352

R857

R1354R1355

FB1261

R1356R135

7 R1358

IC1351

R1359

FB1265

C822R861

R862

C827

C829

R136

2

C443

FB1271

FB1272

FB1273

C831

C832

C256

C833

C258

C834

R870

C259

R871

R873C837

R874

R876

C260

R879

C261

C262

FB1282

RB102

FB1287

RB104

R881

Q305

C845

Q306

R882R883

R884

Q309

R888

R889

FB12

91

C272

FB12

92

C850

C851

C276

FB12

96

C852

FB12

97

C853

C278

FB1298

C4295

L301

R891

D601

L302

D602

L303

D603

L304

R894

D604

C859

D605

RB501

D606

Q702

RB503

D607

RB504

RB505

IC202

RB506

IC203

RB507

IC204

RB50

8

C860

IC205

RB50

9

D801C861

IC206

C862

IC207

D803

D804 D805

D806

C867

D807

D808

RB510

D809

RB511

C869

RB512

FL303

L128

7

RB513

HA100

FL304

RB514

FL305

HA101

MGND1

FL307

D810

FL308

FL309

RB901

RB519

L705D8

11

RB902

L706

L707

RB904

L708

RB905

RB906

FL310

RB520

RB521

FL311

RB522

RB13

17

IC80

5

FB101

RB1322

IC808

PS301

IC809

PS303PS304

RB1328

FB302

CN1401

CN1402

CN1403

C120

4

SL4254

CN1404

C120

5

CN1405

C1206

R301

C1401

C1402

C1403C1404R304

SL4261C1407

CN1220

C1409

R115

C1215

R309

FB70

1

R116

FB70

2

R117

FB70

3

Q140

8

R118

FB70

4

Q1409

FB70

5

R504

FB1101

C1413

FB1103

R507

C1414

C122

1

C1415C1416C1417

C1418

C1419

R704

CN301

CN1235

R705

CN302

R707

C1420

R709

R515R517

R1208

SIA001

R519

C1233

R710

R140

1

CN7001

CN501

R1402R1403

R1404

FB1310

R714R1405

FB1311

R715

R716

R1407

R717

R1408

FB1314

R524

IC1401

R1409

IC1402

R526

R333

IC1404

R528

C7001

CN702

R912

R1410

R914

R720

R141

1

R339

R915R916

R1413

R917 R9

18

R4101

R141

5

FB1321

R122

1

C301

R919

R4102

R141

6

R4103R4104

R4105

TH1401

C305

R4106

FB13

26

CN902

C307

CN903

R4107

C308

R4108

R4109

C309

R925

R733

R411

0

R734

C311

S1401

R1231

C312

C313

R1427

R737

C314

R1234

R738

C315

R739

C316

C317

R353

C319

C1261 R355

C701C702

C703

R740

R143

1

C1265

C511

R741

C705

R143

2C1267

C320

C514

R550

R143

5

C322

R700

2

R747

C323

R700

3

R748

R554

R1439C325

C901

R1246

C902

C903

R700

8

C904

C135

C711

R700

9

C1271

C712

C1272

R367

C1273

R943

R944

R369

R945

R1442

R946

R948

C1279

S501

R7014

R370R1

449

R565

C337

R125

8

R7018

C4160

R125

9

R7019

C1281

R375

R376

C4162

C128

2

R377R378

R1450C4164

C1285

C4166

C1286

C128

7

R7020

R1260

C1288

C4168

C340

R702

1

C128

9

R1261

R1456

R1262R1263

C345C346

R126

6

C347

C153

C348

C155

C1291

R961

C156

C129

2

R962

C157

C1293

R963

C158

C159

C129

5

R1462

C1296 C129

7

C350

C1298

C351

R1465

R146

6

C160

C741

C742

C743

C744

R147

2

R977

C361

R704

1

C362

R704

3

C364

C171

R128

5

C366

RB202

D307

R1287

C174

RB204

IC1280

D308

R1289R1

480

R148

2R1

483

R1484

R148

5R1

486

R148

7

R129

3

R1488

GND1

IC101

GND2

IC102

C376

IC103IC104

C378

IC105

C379

D701

IC106

D702

IC107

D703

D704

Q801

D705

D706

D707

D708

Q805

D709

Q807

IC303

IC304

Q809

IC307

L603

L604

D710

RB1401

D711

L605

RB1402

D712

D713

L607

L608

L609

IC502

C392

R8012

Q816

L803

L804

C395

R801

5

IC701

R8023

R802

4

IC901

R8025

R802

7

R8028

FB201

R8029

CN1301

C1101

CN1302

R803

0 R8031

C110

6

R803

2

C110

7

R803

3

C110

8

R8034

C110

9

FB401

R8035

R803

6

R803

7

R803

8

X1201

R803

9

C1302

C111

0

C130

5

RB7001

RB7002

RB7003

RB7004

R804

0

C1309

R804

3

MB-127 BOARD (SIDE A)

1-877-084- 11, 21

C

D

E

F

A

1 2 3 4 5 605

B

21

21

4 5

21

4445

1817

21

51

45

8 1

458 1

8

1

21

2423

3

1

5

1

21

87

32

1

17

1634

5 1

3 451

1 19

1

6

1 24

48 251

35

70

36

17

28

1 5

1 5

1

7

1534

2415

1132141

16 21714

115

1 2

501

E EB

EB

EB

458 1

E

E

E

B

1

3

6

4

1

3

2

4

1324

HDMI OUT

3 461

EB

3

4

2

1

MB-127 BOARD (SIDE A)

CN301 F-2CN602 A-5CN702 A-4CN801 A-1CN902 A-6CN1402 E-6CN1403 B-1CN1404 F-4CN4201 E-1CN4261 F-1

D307 F-3D308 F-3D601 B-4D604 B-5D605 B-4D803 B-3D807 A-3D809 A-3D810 A-2D811 A-4

IC304 B-2IC502 C-6IC805 B-2IC808 B-3IC1351 D-2IC1401 B-1

Q305 F-3Q306 F-3Q309 F-3Q702 A-4Q801 A-1Q805 B-2Q809 B-1Q1408 C-1

5-6

BDP-S360



5-6. MB-127 BOARD (MAIN) PRINTED WIRING BOARD (SIDE B) • See page 2-4 for circuit boards location.- Ref. No.: MB-127 board; 10,000 series -

C1118

R8044

R401

RB7009

C1119

R402

R8046

R403

R210R211

R212

R407R213

R408

RB7014

RB7015

D1102D1103

R603

D1104D1105

R606

R1102

R607

R1103

R1104

C4201

R1105 R1106

C4203

R223

R1107

R224

R1108

R225

C4205

IC1101R2

26

R227

C420

7

R228

R229

R805

R1301

C4209

R806

R1302

R807R808

R614

HB001

R1111

R615

R616

R617

R230

R618

R1115 R619

R1118

C1335

R1119

R812

R813

R814R620

R1311

R621

R622R623

R624

C201

R625

C202

R1122

R626

C203

R112

3

C4220

C204

R112

4C205

C422

1

C206

C4222

C207

C4223

C208

C4224

R1128

C209

C422

5

R821

R112

9

C4226C4227C4228

R825

C401

C402

C403

R827

C404

C210

R113

0

R828

C405

C211

R635

R113

1

R829

R4206

C406

C212

R113

2

R636

C213 C407

R113

3

R637

R4208

C4230

C408

C214

R113

4

C409

IC4201

R4209

C215

R113

5

C216

R1137

C217

C1354

C218

R1138

R830

C1355

C4235

C219

R1139C6

01

C602

R832

C423

7

C603

R833

C410

C604

R640

C605

R835

R836

R4212

C606

R421

4

C220

R1140

C414

R838

R1335

C415

C221R1

141

R839

C609

C222

C416

R1142

C223 C417

C224

C418

R4219

C225C419 C802

C226C227

C803

C424

4

C228

R840

R841

C229

C805C6

11

C806

X602

R842

C612

C807

C613

C420

C808

R844

C421

C615

C809

R845

R4222

C422

R846

R4223

C423

R847

R4224

C230

C424

R848

C425 FB1251

R4225

C231

R849

C426

C232

C427C233

R422

8

C4250

C234 C428

C429

C137

1

R422

9

C235

C811

C1372

C236

C4252

C812

C813

C4253

C237

C137

4

C814

C137

5

C239

C1376

R852R853

C1377

R423

0

C1378

C430

C624

R423

1

C431

C819

C625

R856

R423

2

C432

R423

3

C433

C240

R4234FB1260

C434

R858

C241

C435

R4235

R859

C242

FB1262

C436

C243

C437

C244

R4238

C438

C820

C245

C821

C246 C1382

IC1352

C426

2

FB1266

C247

C4263

C248

C1384C4

264

C824

R860

C249

C1385 C4265

C4266

C138

6

C826

C1387

R863

C1388

C426

8

C828

R864

C440

C1389

C441

R865

C442

R866

R424

3

R867

C250

R424

4

FB1270

R868

C251

R869

C252

C253

C830

C254

R4248

C255

R4249

C4272C4273

C257 C1393

C427

4

C1394

C1395

C835

C836

C4276

R872

C838

KB001

R4251C8

39

R875

R4252

R877

KB004

R878

R4255

C263

C840

Q300

R4258

C264 Q301

RB101

R4259

PIB001

C265

C841

Q302

C4282

C266

C842

Q303

RB103

C4283

C267

C843

C844

C428

4

Q304

C268

R880

RB105

C269

C4285

C846

C4286

Q307

C4287

C847

Q308

C848

C849

R885

R886

R887

C270

C271

C273

C274

C275

C429

2

C277

C4293

R890

C4294

C854

C855

R892

C856R893

C858Q701 R895

RB502

R896

R897

R898

FL101

R899

D802C864

C865

C868

RB515

RB516

RB517

RB518

RB903

EP1301

IC601

IC602 FL701 IC802

IC804

IC806

IC807

FB301

FB303

R101

X1101

C1203

R103R104

R105

R106

R107

R108

C1208

R109

C1209

R302

R303

R110

C1210

R111

R305

R306R3

07

R308

C1408

R501

R502

FB706

R503

R310C1

410

C1411 R311

R505R312

C1412

R506

FB1102

R313

R314

C1220

R508

R315

R121

R509

R316

C1222

R122

R123

C1223

R317

R318

C1224

R124

R319

R125

EP1345

R701

R126

R702

R127

R703

R128

R510

FB1301

R511

R706

R512

R513

R320

R708

R514

R321

R322

R516

R323R324

R518

R325

C1231

R1209

R326

R902

R327R903R328

R904

R329

R711

R712

R713

HB100

R1210

R520

R121

1

HB101

R909

R521

R1406

R1212

R522R5

23

R330

R718

R331

C101

R719

R525

R332

C102

IC1403

C103

R527

R334

C104

R910

C105

R335

R911

C106C107

R338

C108

R721

C1245

C109

L1101

R1412

L1102R722R723

R1414

R724

R725

C302

R726

R141

7

R1223

C303 R727

R141

8

C110

C304

R728

R1419

R341

C111

R729

R342

C112

C306

C113

C114

IC1220

R345

C115

R921 C1251

C116

R922

C1252

C117

C1253

R923

R1420

C118

C1254

R924

R730

R1421

C119

R349

C1255

R731

R1422

C1256

R926

R732

C1257

R927

C310

R1424

C1258

R928

C1259

R929

R1232

C120C121

R1235

C122

R352

R1236

C123

R123

7

C318

C124

R930

C125

R931

C126

C1262

R356

R932

R357

C127

C1263

R933

R1430

C128

C1264

C704

R934

C129

R935

C1266

C706

R742

R936

C513

R743

R937

C707

C1268

R938

C708

R4121

C321

R939

R7001

R1241

R745

R551

C709

R4122

R1242

C516

R746

R4123

R1243

C517

R553

C324

R1438

R1244

C130

R4124

R700

4

R1245C131

FB4225

R700

5

R4125

R555

C132

R700

6

C326

R4126

R556

C133

R363

R1247

R4127

C327

R557

C134 R4128

R1248

R364

C328

R940

R558

R365

R4129

C4151

C329

C905

R941

R559

C136

C4152

R942

C906

C137

C713

C907

C138

R750

C908

R368

R1441

C139

R751

IC1245

C909

C716

R752

R1443

R947

R1250

R4130

C330

R7010

R560

R1445

R4131

C331

R949

R561

C332

R1446

R4132

R562

C333

R563

C334

R1448

C140

R564

R371

C141

C335

R372

C142

R7016

C336

R1256

R566

C143

R373

R7017

C338R374

C144

C339

C145

C4161

IC1251

C146

C722

C147 C4163

R953

R954

C148

C149

R379C725

C4165

C4167

C341

C4169

C342

C343

R380

C150

C344

R381

R1459

C151

C152

C154

R960

C349

SIB001

C731

C732

R1464

C738

R1271

C739

C352

R1272

C353

R146

7

C355

C161

C162

R703

6

C357

C163

R703

7

C164C358

C740

C165

R703

9

C166

C167

C168

C169

C747

R978

R704

0

C748

D301

R147

5

C749

R147

6

D302

R704

2

D303

R147

7R1

478

C170

D304 R1284

R147

9

RB201

C172C173

RB203

C369

RB205

C751

R148

1

C757

C758

C759

FB1393

C374

C375

C377

C760

C762

Q803

Q804

IC301

FL201

IC302

Q806

Q808

FB42

84

R8004

R8005

L601

R800

6

L602

R800

7

R8008

IC308

R8009

IC309

L606

RB1403

Q810

IC501

FL401

Q811

Q812

Q813

IC310

R8010

Q814

Q815

IC311

L801

R8011

R801

3

R8014Q818

C396

R801

6

C397

R8017

C398

R801

8

C399

R8019

IC702

IC703

RB1220

IC704

IC705R8020

R802

1

R8022

R8026

C1102C1103

C1104C1105

C130

1

R201R2

03

C130

3

R204

R205

C1111

R206

C1112

R207

C1113

R208

C1114

R209

C1115

R8041

FB60

1

C1116

R8042

RB7007

C1117

VCCI

IC801

J801

CN1101

MB-127 BOARD (SIDE B)

1-877-084- 11, 21

C

D

E

F

A

12345605

B

1 24

48 25

1

910 1819

272836

1 4

1534

1534

1 5

3 4

8 5

1

3

2

1

5

8

4

1

16

8

1 5

9

1

4

8

5

1

4

8

5

1

4

8

5

17

148

1

65

4

1 54

2827

1

5

3

415

34

1

5

8

4

1

5

8

4

1

5

8

4

1

5

8

41 7

814

1

2

7

8

LINE OUT (VIDEO/AUDIO)COMPONENT VIDEO OUT (PR/PB/Y)

DIGITAL OUT (COAXIAL)

LAN (100)

DIGITAL OUT(OPTICAL)

1

5

3

4

1534

1

5

3

4

E

E

B

E B

EB

E B

1

1 27

54 28

53 4

1 1617

32

64

49

48 33

MB-127 BOARD (SIDE B)

CN1101 A-5

D301 C-1D303 B-1D304 E-6D802 B-3

IC301 F-3IC302 F-4IC601 A-4IC703 A-4IC704 B-4IC705 A-5IC802 B-3IC804 B-3IC806 B-2IC807 A-3IC1101 B-5IC1403 F-5

Q301 C-1Q302 C-1Q303 E-6Q304 F-6Q307 C-1Q308 F-6Q806 B-3Q812 B-3Q813 B-2

5-7E

BDP-S360



5-7. USB-014 BOARD (USB CONNECTOR) PRINTED WIRING BOARD - Ref. No.: USB-014 board; 20,000 series -• See page 2-4 for circuit boards location.

51

1 45 6

VDR361

CN361

CN362A

1 205

1-878-085- 11

USB-014 BOARD (SIDE A)

A

1205 1-878-085- 11

USB-014 BOARD (SIDE B)

EXT

USB-014 BOARD (SIDE B)

CN362 A-1

6-1

BDP-S360SECTION 6

IC PIN FUNCTION DESCRIPTION

6-1. MAIN SYSTEM CONTROL PIN FUNCTION (MB-127 BOARD IC101: MC-10121F1-207-TA1-A)Pin No. Name I/O Description

A1 VOID - This pin is not ball.A2 VOID - This pin is not ball.A3 VOID - This pin is not ball.A4 RFN2 I RF I/F RF differential signal (-) InputA5 RFP2 I RF I/F RF differential signal (+) InputA6 RFN I RF I/F RF differential signal (-) InputA7 RFP I RF I/F RF differential signal (+) InputA8 AGND - Analog GND for Drive Controller BlockA9 E I RF I/F Main Beam Signal (E) InputA10 F I RF I/F Main Beam Signal (F) InputA11 D I RF I/F Main Beam Signal (D) InputA12 A I RF I/F Main Beam Signal (A) InputA13 CAGC1 I/O RF I/F Connection to condenser for AGC detector (normal)A14 CAGC2 I/O RF I/F Connection to condenser for AGC detector (for CAPA)A15 ADIN0/RFP7 I RF I/F A/D Input/GPIO 7A16 MON1/RFP4 I/O RF I/F Internal Signal Monitor, Monitor Input Signal/GPIO 4A17 RFEQOP O RF I/F RFEQ (+) Output (for monitor)A18 SAGNDANA - Analog ground for Serial ATAA19 SACREFN I Serial ATA Reference Clock Negative InputA20 SAGNDDIG - Digital ground for Serial ATAA21 SATXN0 O Serial ATA Serial Transmit Data0A22 SAGNDDIG - Digital ground for Serial ATAA23 SARXP0 I Serial ATA Serial Receive Data0A24 SAGNDDIG - Digital ground for Serial ATAA25 GND - Ground for digital and DDR2 SDRAMA26 GPIO35 I/O Horizontal Sync Signal/Composite Sync SignalA27 GND - Ground for digital and DDR2 SDRAMA28 GPIO43 I/O VODY6: Digital Video Y Data OutputA29 GND - Ground for digital and DDR2 SDRAMA30 N.U. I Not used (Fixed at "L")A31 GND - Ground for digital and DDR2 SDRAMA32 N.U. I Not used (Fixed at "H")A33 VOID - This pin is not ball.A34 VOID - This pin is not ball.A35 VOID - This pin is not ball.B1 VOID - This pin is not ball.B2 VOID - This pin is not ball.B3 AGND - Analog GND for Drive Controller BlockB4 AGND - Analog GND for Drive Controller BlockB5 AVDD33 - Analog 3.3V supply for Drive Controller BlockB6 CREG O RF I/F Regulator Voltage Output (1.65V)B7 VREFIO I/O RF I/F Reference Voltage Input/Output for pickupB8 RFTSTIN1 I RF I/F RF Test InputB9 G/FOP I RF I/F Main Beam Signal (G) Input/FO (+) Input for focusingB10 H/FOM I RF I/F Main Beam Signal (H) Input/FO (-) Input for focusingB11 B I RF I/F Main Beam Signal (B) InputB12 C I RF I/F Main Beam Signal (C) InputB13 CEQ I/O RF I/F Connection to condenser for RF EQ fc control circuitB14 REQ I/O RF I/F Connection to resistor for setting RF EQ circuit currentB15 ADIN1 I RF I/F A/D InputB16 MON2/RFP5 I/O RF I/F Internal Signal Monitor, Monitor Input Signal/GPIO 5B17 RFEQOM O RF I/F RFEQ (-) Output (for monitor)B18 SAVDDANA - 1.8V supply (Serial ATA analog VDD)B19 SACREFP I Serial ATA Reference Clock Positive InputB20 SAGNDDIG - Digital ground for Serial ATAB21 SATXP0 O Serial ATA Serial Transmit Data0B22 SAGNDDIG - Digital ground for Serial ATAB23 SARXN0 I Serial ATA Serial Receive Data0B24 SAGNDDIG - Digital ground for Serial ATA

6-2

BDP-S360

Pin No. Name I/O DescriptionB25 GPIO40 I/O VODY3: Digital Video Y Data OutputB26 GPIO42 I/O VODY5: Digital Video Y Data OutputB27 GPIO45 I/O VODY8: Digital Video Y Data OutputB28 GPIO46 I/O VODY9: Digital Video Y Data OutputB29 N.U. I/O Not usedB30 N.U. I Not used (Fixed at "H")B31 N.U. O Not usedB32 N.U. I Not used (Fixed at "H")B33 S2CSB I Clocked Serial I/F 2 Slave Select InputB34 VOID - This pin is not ball.B35 VOID - This pin is not ball.C1 VOID - This pin is not ball.C2 SDRV2 O Motor Drive I/F Thread Drive OutputC3 AVDD33 - Analog 3.3V supply for Drive Controller BlockC4 FPDVINP2 I RF I/F Front Monitor Input (+)C5 FPDVINP I RF I/F Front Monitor Input (+)C6 AGND - Analog GND for Drive Controller BlockC7 AGND - Analog GND for Drive Controller BlockC8 AVDD15 - Analog 1.5V supply for Drive Controller BlockC9 AVDD33 - Analog 3.3V supply for Drive Controller BlockC10 AVDD15 - Analog 1.5V supply for Drive Controller BlockC11 AGND - Analog GND for Drive Controller BlockC12 VDD15RVAD - Power Supply 1.5V for RV ADCC13 AVDD15 - Analog 1.5V supply for Drive Controller BlockC14 AGND - Analog GND for Drive Controller BlockC15 MON3/RFP6 I/O RF I/F Internal Signal Monitor, Monitor Input Signal/GPIO 6C16 MA4 O External SDRAM I/F Memory Address OutputC17 DVDD33 - Digital 3.3V supply for Drive Controller Block)C18 DGND - Digital GND for Drive Controller BlockC19 SAGNDDIG - Digital ground for Serial ATAC20 SAGNDDIG - Digital ground for Serial ATAC21 SAGNDDIG - Digital ground for Serial ATAC22 SAGNDDIG - Digital ground for Serial ATAC23 SAGNDDIG - Digital ground for Serial ATAC24 GPIO41 I/O VODY4: Digital Video Y Data OutputC25 GPIO50 I/O VODC3: Digital Video Cb/Cr Data OutputC26 GPIO51 I/O VODC4: Digital Video Cb/Cr Data OutputC27 VDD3 - 3.3V supply (I/O buffers)C28 GND - Ground for digital and DDR2 SDRAMC29 VDD3 - 3.3V supply (I/O buffers)C30 ATX O Sample data output for S/PDIF, HDMIC31 VDD3 - 3.3V supply (I/O buffers)C32 S2CKIN I Clocked Serial I/F 2 Serial Clock InputC33 S2DOUT O Clocked Serial I/F 2 Serial Data OutputC34 S2DIN I Clocked Serial I/F 2 Serial Data InputC35 VOID - This pin is not ball.D1 MDRV O Motor Drive I/F Spindle Drive OutputD2 SDRV1 O Motor Drive I/F Thread Drive OutputD3 DAOUT2 O RF I/F General-purpose D/A Converter OutputD4 FPDVINN2 I RF I/F Front Monitor Input (-)D5 FPDVINN I RF I/F Front Monitor Input (-)D6 CBC I/O RF I/F Connector to condenser for setting WOBBLE circuit (A+D) signal AGC response speedD7 RFTSTIN2 I RF I/F RF Test InputD8 REF16 O RF I/F System Reference Voltage Output (for 3.3V supply)D9 RFOP O RF I/F Read RF Output (+)D10 RFTST3/RFP3 O RF I/F RF Test/GPIO 3D11 DGND - Digital GND for Drive Controller BlockD12 PB0/SW1 I/O General Port I/F, Three values Control Output SW (default)D13 PB1/SW2 I/O General Port I/F, Three values Control Output SW (default)D14 MA1 O External SDRAM I/F Memory Address OutputD15 MA6 O External SDRAM I/F Memory Address Output

6-3

BDP-S360

Pin No. Name I/O DescriptionD16 MA0 O External SDRAM I/F Memory Address OutputD17 MA2 O External SDRAM I/F Memory Address OutputD18 MA3 O External SDRAM I/F Memory Address OutputD19 GND - Ground for digital and DDR2 SDRAMD20 SAVDDDIG - 1.05V supplyD21 SAVDDTIO - 1.8V supply (Serial ATA Tx I/O)D22 GPIO34 I/O Video Pixel ClockD23 GPIO37 I/O VODY0: Digital Video Y Data OutputD24 GPIO49 I/O VODC2: Digital Video Cb/Cr Data OutputD25 GPIO53 I/O VODC6: Digital Video Cb/Cr Data OutputD26 GND - Ground for digital and DDR2 SDRAMD27 AO0BD3 O Audio PCM Serial Data OutputD28 AO0BD0 O Audio PCM Serial Data-L/R Output/Down Mixed OutputD29 GND - Ground for digital and DDR2 SDRAMD30 AO0MCK O Audio Master Clock OutputD31 GND - Ground for digital and DDR2 SDRAMD32 N.U. I Not usedD33 S0DIN I Not usedD34 S0DOUT O Clocked Serial I/F 0 Serial Data OutputD35 S0CKOUT O Clocked Serial I/F 0 Serial Clock OutputE1 FDRV O Motor Drive I/F Focus Drive OutputE2 DAOUT0 O RF I/F General-purpose D/A Converter OutputE3 DAOUT1 O RF I/F General-purpose D/A Converter OutputE4 VDD15WBLAD - Power Supply 1.5V for WOBBLE ADCE5 GND_WBLAD - Ground for WOBBLE ADCE6 CWAGC I/O RF I/F Connection to condenser for setting WOBBLE circuit AGC response speedE7 CAD I/O RF I/F Connection to condenser for setting WOBBLE circuit (A+D) signal AGC response speedE8 REF075 O RF I/F System Reference Voltage Output (for 1.5V supply)E9 RFON O RF I/F Read RF Output (-)E10 AGCINP I RF I/F AGC Input (+)E11 DVDD33 - Digital 3.3V supply for Drive Controller Block)E12 PB3/SW4 I/O General Port I/F, Three values Control Output SW (default)E13 PB2/SW3 I/O General Port I/F, Three values Control Output SW (default)E14 MA7 O External SDRAM I/F Memory Address OutputE15 MA10 O External SDRAM I/F Memory Address OutputE16 MA8 O External SDRAM I/F Memory Address OutputE17 MA5 O External SDRAM I/F Memory Address OutputE18 GPIO7 O GPIO7E19 N.U. I/O Not usedE20 SAVDDDIG - 1.05V supplyE21 SAVDDTIO - 1.8V supply (Serial ATA Tx I/O)E22 GPIO38 I/O VODY1: Digital Video Y Data OutputE23 GPIO47 I/O VODC0: Digital Video Cb/Cr Data OutputE24 GPIO54 I/O VODC7: Digital Video Cb/Cr Data OutputE25 GND - Ground for digital and DDR2 SDRAME26 AO0BD1 O Audio PCM Serial Data-SL/SR OutputE27 AO0LRCK O Audio L/R Clock OutputE28 AO1BD O Audio PCM Serial Data-L/R Output/Down Mixed OutputE29 AO1BCK O Audio Data Clock OutputE30 GPIO10 I/O FORMAT0 (480, 1080="0" 720="1")E31 N.U. I/O Not usedE32 GND - Ground for digital and DDR2 SDRAME33 GND - Ground for digital and DDR2 SDRAME34 VDD3 - 3.3V supply (I/O buffers)E35 GND - Ground for digital and DDR2 SDRAMF1 TDRV O Motor Drive I/F Tracking Drive OutputF2 AVDD15 - Analog 1.5V supply for Drive Controller BlockF3 AVDD15 - Analog 1.5V supply for Drive Controller BlockF4 AGND - Analog GND for Drive Controller BlockF5 AGND - Analog GND for Drive Controller BlockF6 AVDD33 - Analog 3.3V supply for Drive Controller Block

6-4

BDP-S360

Pin No. Name I/O DescriptionF7 RLD O RF I/F Laser Driver Control for ReadF8 CBCO I/O RF I/F Connection to condenser for WOBBLE circuit (A+D) HPF

F9 CBHWBL/CID I/O RF I/F Connection to condenser for LPP circuit bottom hold (WOBBLE level) and ID detection circuit LPF

F10 AGCINN I RF I/F AGC Input (-)F11 DGND - Digital GND for Drive Controller BlockF12 MBA1 O External SDRAM I/F Memory Bank Address OutputF13 MA9 O External SDRAM I/F Memory Address OutputF14 MBA0 O External SDRAM I/F Memory Bank Address OutputF15 MA11 O External SDRAM I/F Memory Address OutputF16 MD8 I/O External SDRAM I/F Memory Data Input/OutputF17 MD11 I/O External SDRAM I/F Memory Data Input/OutputF18 GPIO6 I/O GPIO6F19 N.U. I/O Not usedF20 SAVDDDIG - 1.05V supplyF21 SAVDDTIO - 1.8V supply (Serial ATA Tx I/O)F22 GPIO39 I/O VODY2: Digital Video Y Data OutputF23 GPIO48 I/O VODC1: Digital Video Cb/Cr Data OutputF24 GPIO56 I/O VODC9: Digital Video Cb/Cr Data OutputF25 NMI I Not used (Fixed at "H")F26 AO0BD2 O Audio PCM Serial Data-C/LE OutputF27 AO1LRCK O Audio L/R Clock OutputF28 GND - Ground for digital and DDR2 SDRAMF29 GPIO15 O IT_GPIO1F30 GPIO57 O USB VBUS PCONT ("H": ON, "L": OFF)F31 UA0RXDB I UART 0 Receive DataF32 GND - Ground for digital and DDR2 SDRAMF33 VAY O S-Video Y or Composite CVBS Signal OutputF34 GND - Ground for digital and DDR2 SDRAMF35 VAB O Component Output either B or Pb SignalG1 DVDD33 - Digital 3.3V supply for Drive Controller Block)G2 SDCK O General Serial I/F Clock SignalG3 SDCS1B O General Serial I/F Channel #1 Select SignalG4 SDCS3B I/O General Serial I/F Channel #3 Select SignalG5 PA2 I/O General Port I/F G6 PA0 I/O General Port I/F G7 AVDD33 - Analog 3.3V supply for Drive Controller BlockG8 RFTST1/SWRF1/RFP1 O RF I/F RF Test Output/SWRF1 Output/GPIO 1G9 CADO I/O RF I/F Connection to condenser for WOBBLE circuit (B+C) HPF

G10 CBHLPP I/O RF I/F For LPP circuit bottom hold (LPP)G11 DVDD15 - Digital 1.5V supply for Drive Controller BlockG12 CASB O External SDRAM I/F Memory Column Address StrobeG13 MCKE O External SDRAM I/F SDRAM Clock EnableG14 RASB O External SDRAM I/F Memory Row Address StrobeG15 MD9 I/O External SDRAM I/F Memory Data Input/OutputG16 MD4 I/O External SDRAM I/F Memory Data Input/OutputG17 MD3 I/O External SDRAM I/F Memory Data Input/OutputG18 N.U. I/O Not usedG19 SAVDDDIG - 1.05V supplyG20 SAVDDTIO - 1.8V supply (Serial ATA Tx I/O)G21 GPIO36 I/O Vertical Sync Signal/Blanking Sync SignalG22 GPIO44 I/O VODY7: Digital Video Y Data OutputG23 GPIO52 I/O VODC5: Digital Video Cb/Cr Data OutputG24 GPIO55 I/O VODC8: Digital Video Cb/Cr Data OutputG25 VDD3 - 3.3V supply (I/O buffers)G26 AO0BCK O Audio Data Clock OutputG27 AO1MCK O Audio Master Clock OutputG28 GPIO14 I/O IP (Progressive="0" Interlace="1") (Not used)G29 GPIO12 I/O ASPECT0 (4:3="0" 16:9, 4:3LB="1")G30 UA0TXDB O UART 0 Transfer DataG31 SCL1 I/O I2C I/F 1 Serial Clock

6-5

BDP-S360

Pin No. Name I/O DescriptionG32 VDD3 - 3.3V supply (I/O buffers)G33 GND - Ground for digital and DDR2 SDRAMG34 VAR O Component Output either R or Pr SignalG35 GND - Ground for digital and DDR2 SDRAMH1 DGND - Digital GND for Drive Controller BlockH2 DVDD15 - Digital 1.5V supply for Drive Controller BlockH3 SDIO I/O General Serial I/F Input/Output DataH4 SDCS0B O General Serial I/F Channel #0 Select SignalH5 SDCS2B I/O General Serial I/F Channel #2 Select SignalH6 PA3 I/O General Port I/F H7 PA1 I/O General Port I/F H8 WALPF1 I/O Connection to condenser for WAPLLH9 RFTST2/SWRF2/RFP2 O RF I/F RF Test Output/SWRF2 Output/GPIO 2H10 CWHP I/O RF I/F Connection to condenser for WOBBLE circuit HPFH11 MD12 I/O External SDRAM I/F Memory Data Input/OutputH12 WEB O External SDRAM I/F Memory Write EnableH13 MCLKOUT O External SDRAM I/F SDRAM Clock OutputH14 MD7 I/O External SDRAM I/F Memory Data Input/OutputH15 MD6 I/O External SDRAM I/F Memory Data Input/OutputH16 GPIO20 I GPIO20H17 N.U. I/O Not usedH18 SAGNDDIG - Digital ground for Serial ATAH19 SAGNDDIG - Digital ground for Serial ATAH20 PVDD - 1.05V supply for PLLH21 PGND - Ground for PLLH22 RSTSWB I Hardware Reset (L: RESET)H23 TMODE4 I Not used (Fixed at "L")H24 TEST I Not used (Fixed at "L")H25 TMODE1 I Not used (Fixed at "L")H26 TMODE0 I Not used (Fixed at "L")H27 TMODE2 I Not used (Fixed at "L")H28 GPIO13 I/O ASPECT1 (4:3, 16:9="0" 4:3LB="1")H29 GPIO58 O GPIO58H30 SDA1 I/O I2C I/F 1 Serial DataH31 SDA0 I/O I2C I/F 0 Serial DataH32 GND - Ground for digital and DDR2 SDRAMH33 VAC O S-Video C Signal OutputH34 GND - Ground for digital and DDR2 SDRAMH35 VAG O Component Output either G or Y SignalJ1 X2 I/O Crystal Input/OutputJ2 SFSIO2 I/O Flash Memory I/F Serial Data Input/OutputJ3 SFSIO3 I/O Flash Memory I/F Serial Data Input/OutputJ4 PC0 I/O General Port I/F J5 PA7 I/O General Port I/F J6 PA6 I/O General Port I/F J7 PA4 I/O General Port I/F J8 MD15 I/O External SDRAM I/F Memory Data Input/OutputJ9 MD1 I/O External SDRAM I/F Memory Data Input/OutputJ10 MD2 I/O External SDRAM I/F Memory Data Input/OutputJ11 MD13 I/O External SDRAM I/F Memory Data Input/OutputJ12 LDQM I/O External SDRAM I/F Lower Data Mask ControlJ13 UDQM I/O External SDRAM I/F Upper Data Mask ControlJ14 MD5 I/O External SDRAM I/F Memory Data Input/OutputJ15 MD10 I/O External SDRAM I/F Memory Data Input/OutputJ16 GPIO5 I Not Used (Fixed at "H")J17 GPIO2 O Not UsedJ18 SAGNDDIG - Digital ground for Serial ATAJ19 VDD3 - 3.3V supply (I/O buffers)J20 PVDD - 1.05V supply for PLLJ21 PGND - Ground for PLLJ22 VDD3 - 3.3V supply (I/O buffers)

6-6

BDP-S360

Pin No. Name I/O DescriptionJ23 GND - Ground for digital and DDR2 SDRAMJ24 TMODE3 I Not used (Fixed at "L")J25 TMODE5 I Not used (Fixed at "L")J26 VRVDD - 1.05V supply for VR5500 PLLJ27 VRGND - Ground for VR5500 PLLJ28 GPIO11 I/O FORMAT1 (480="0" 720, 1080="1")J29 GND - Ground for digital and DDR2 SDRAMJ30 SCL0 I/O I2C I/F 0 Serial ClockJ31 GND - Ground for digital and DDR2 SDRAMJ32 VDD3 - 3.3V supply (I/O buffers)J33 GND - Ground for digital and DDR2 SDRAMJ34 HDVSS - Analog ground for HDMIJ35 HDVSS - Analog ground for HDMIK1 X1 I Crystal InputK2 PC1 I/O General Port I/FK3 SFCS0B O Flash Memory I/F Serial Memory Chip SelectK4 SFSIO0 I/O Flash Memory I/F Serial Data Input/OutputK5 PB4 I/O General Port I/FK6 DVDD15 - Digital 1.5V supply for Drive Controller BlockK7 PTEST28 O Test I/F (HIOCS16B)K8 PA5 I/O General Port I/FK9 MD0 I/O External SDRAM I/F Memory Data Input/OutputK10 VOID - This pin is not ball.K11 VOID - This pin is not ball.K12 VOID - This pin is not ball.K13 VOID - This pin is not ball.K14 VOID - This pin is not ball.K15 VOID - This pin is not ball.K16 VOID - This pin is not ball.K17 VOID - This pin is not ball.K18 VOID - This pin is not ball.K19 VOID - This pin is not ball.K20 VOID - This pin is not ball.K21 VOID - This pin is not ball.K22 VOID - This pin is not ball.K23 VOID - This pin is not ball.K24 VOID - This pin is not ball.K25 VOID - This pin is not ball.K26 VOID - This pin is not ball.K27 VDD10 - 1.05V supply (core)K28 VDD10 - 1.05V supply (core)K29 GND - Ground for digital and DDR2 SDRAMK30 GND - Ground for digital and DDR2 SDRAMK31 VDD3 - 3.3V supply (I/O buffers)K32 VACOMPYC - Compensation capacitanceK33 HDVSS - Analog ground for HDMIK34 HTXP2 O HDMI TMDS Data Output 2+K35 HTXN2 O HDMI TMDS Data Output 2-L1 DGND - Digital GND for Drive Controller BlockL2 PC2 I/O General Port I/FL3 SFSIO1 I/O Flash Memory I/F Serial Data Input/OutputL4 SFSCK O Flash Memory I/F Serial Interface Clock OutputL5 DVDD15 - Digital 1.5V supply for Drive Controller BlockL6 DGND - Digital GND for Drive Controller BlockL7 PTEST17 I/O Test I/F (DASPB)L8 PB5 I/O General Port I/FL9 MD14 I/O External SDRAM I/F Memory Data Input/OutputL10 VOID - This pin is not ball.L11 VOID - This pin is not ball.L12 VOID - This pin is not ball.L13 VOID - This pin is not ball.

6-7

BDP-S360

Pin No. Name I/O DescriptionL14 VOID - This pin is not ball.L15 VOID - This pin is not ball.L16 VOID - This pin is not ball.L17 VOID - This pin is not ball.L18 VOID - This pin is not ball.L19 VOID - This pin is not ball.L20 VOID - This pin is not ball.L21 VOID - This pin is not ball.L22 VOID - This pin is not ball.L23 VOID - This pin is not ball.L24 VOID - This pin is not ball.L25 VOID - This pin is not ball.L26 VOID - This pin is not ball.L27 GND - Ground for digital and DDR2 SDRAML28 VDD3 - 3.3V supply (I/O buffers)L29 GND - Ground for digital and DDR2 SDRAML30 VARSETYC - 680-ohm ResisterL31 VAREFRGB - Voltage Reference Input for DAC (1.32V)L32 HDVSS - Analog ground for HDMIL33 HDVSS - Analog ground for HDMIL34 HTXP1 O HDMI TMDS Data Output 1+L35 HTXN1 O HDMI TMDS Data Output 1-M1 CLK27OUT O 27MHz Clock output for XTALM2 FG I Motor Drive I/F FG Signal InputM3 PSI5 I/O General Port I/FM4 PSI3 I/O General Port I/FM5 PSI1 I/O General Port I/FM6 DVDD33 - Digital 3.3V supply for Drive Controller Block)M7 PTEST30 I/O Test I/F (PDIAGB)M8 DGND - Digital GND for Drive Controller BlockM9 VDD15OSC - Power Supply 1.5V for OscillatorM10 VOID - This pin is not ball.M11 VOID - This pin is not ball.M12 VOID - This pin is not ball.M13 VOID - This pin is not ball.M14 VOID - This pin is not ball.M15 VOID - This pin is not ball.M16 VOID - This pin is not ball.M17 VOID - This pin is not ball.M18 VOID - This pin is not ball.M19 VOID - This pin is not ball.M20 VOID - This pin is not ball.M21 VOID - This pin is not ball.M22 VOID - This pin is not ball.M23 VOID - This pin is not ball.M24 VOID - This pin is not ball.M25 VOID - This pin is not ball.M26 VOID - This pin is not ball.M27 VDD3 - 3.3V supply (I/O buffers)M28 DVDDYC - 3.3V supply (DAC Digital VDD)M29 VAREFYC - Voltage Reference Input for DAC (1.32V)M30 VARSETRGB - 470-ohm ResisterM31 GND - Ground for digital and DDR2 SDRAMM32 HVDD_IO - 3.3V supply (HDMI Tx I/O)M33 HDVSS - Analog ground for HDMIM34 HTXP0 O HDMI TMDS Data Output 0+M35 HTXN0 O HDMI TMDS Data Output 0-N1 CLK27IN I 27MHz Clock InputN2 P53 I/O General Port I/F N3 DVDD33 - Digital 3.3V supply for Drive Controller Block)N4 PSI4 I/O General Port I/F

6-8

BDP-S360

Pin No. Name I/O DescriptionN5 PSI2 I/O General Port I/FN6 PTEST01 I/O Test I/F (HDD1)N7 PTEST00 I/O Test I/F (HDD0)N8 PTEST14 I/O Test I/F (HDD14)N9 GNDOSC - Oscillator GNDN10 VOID - This pin is not ball.N11 VOID - This pin is not ball.N12 VOID - This pin is not ball.N13 PTEST18 I Test I/F (DIORB)N14 PTEST27 O Test I/F (HINTRQ)N15 PTEST22 I Test I/F (HDA0)N16 VDD10 - 1.05V supply (core)N17 PB7 I/O General Port I/FN18 VDD10 - 1.05V supply (core)N19 GND - Ground for digital and DDR2 SDRAMN20 VDD10 - 1.05V supply (core)N21 GND - Ground for digital and DDR2 SDRAMN22 VDD10 - 1.05V supply (core)N23 VDD10 - 1.05V supply (core)N24 VOID - This pin is not ball.N25 VOID - This pin is not ball.N26 VOID - This pin is not ball.N27 AVDDYC - Analog 3.3v supply for Sub Video DACsN28 AGNDYC - Analog ground for Sub Video DACsN29 VACOMPRGB - Compensation capacitanceN30 HDVDD - 1.05V supply (HDMI analog VDD)N31 HDVSS - Analog ground for HDMIN32 HVDD_IO - 3.3V supply (HDMI Tx I/O)N33 HDVSS - Analog ground for HDMIN34 HTXCP O HDMI TMDS Clock Output+N35 HTXCN O HDMI TMDS Clock Output-P1 GND - Ground for digital and DDR2 SDRAMP2 P52 I/O General Port I/FP3 P56 I/O General Port I/FP4 P57 I/O General Port I/FP5 PSI6 I/O General Port I/FP6 PSI0 I/O General Port I/FP7 PTEST12 I/O Test I/F (HDD12)P8 PTEST11 I/O Test I/F (HDD11)P9 PTEST02 I/O Test I/F (HDD2)P10 VOID - This pin is not ball.P11 VOID - This pin is not ball.P12 VOID - This pin is not ball.P13 PTEST15 I/O Test I/F (HDD15)P14 PTEST19 I Test I/F (DIOWB)P15 PTEST29 O Test I/F (IORDY)P16 VDD10 - 1.05V supply (core)P17 PB6 I/O General Port I/FP18 VDD10 - 1.05V supply (core)P19 GND - Ground for digital and DDR2 SDRAMP20 VDD10 - 1.05V supply (core)P21 GND - Ground for digital and DDR2 SDRAMP22 VDD10 - 1.05V supply (core)P23 VDD10 - 1.05V supply (core)P24 VOID - This pin is not ball.P25 VOID - This pin is not ball.P26 VOID - This pin is not ball.P27 AGNDYC - Analog ground for Sub Video DACsP28 AGNDRGB - Analog ground for Main Video DACsP29 DVDDRGB - 3.3V supply (DAC Digital VDD)P30 HDVSS - Analog ground for HDMI

6-9

BDP-S360

Pin No. Name I/O DescriptionP31 HDVDD - 1.05V supply (HDMI analog VDD)P32 HDVSS - Analog ground for HDMIP33 HDVSS - Analog ground for HDMIP34 HEXTP I HDMI Resistance Connection Terminal for Output Amplitude ControlP35 HEXTN I HDMI Resistance Connection Terminal for Output Amplitude ControlR1 XI I Crystal InputR2 P51 I/O General Port I/FR3 P54 I/O General Port I/FR4 P55 I/O General Port I/FR5 VDD3 - 3.3V supply (I/O buffers)R6 P50 I/O General Port I/FR7 PTEST10 I/O Test I/F (HDD10)R8 PTEST05 I/O Test I/F (HDD5)R9 PTEST06 I/O Test I/F (HDD6)R10 VOID - This pin is not ball.R11 VOID - This pin is not ball.R12 VOID - This pin is not ball.R13 PTEST26 O Test I/F (HDMARQ)R14 PTEST25 I Test I/F (HDMACKB)R15 PTEST23 I Test I/F (HDA1)R16 PTEST21 I Test I/F (HCS1B)R17 PTEST20 I Test I/F (HCS0B)R18 GND - Ground for digital and DDR2 SDRAMR19 GND - Ground for digital and DDR2 SDRAMR20 GND - Ground for digital and DDR2 SDRAMR21 GND - Ground for digital and DDR2 SDRAMR22 GND - Ground for digital and DDR2 SDRAMR23 GND - Ground for digital and DDR2 SDRAMR24 VOID - This pin is not ball.R25 VOID - This pin is not ball.R26 VOID - This pin is not ball.R27 AVDDRGB - Analog 3.3v supply for Main Video DACsR28 AGNDRGB - Analog ground for Main Video DACsR29 HDVSS - Analog ground for HDMIR30 HDVSS - Analog ground for HDMIR31 HDVDD - 1.05V supply (HDMI analog VDD)R32 HVDD_IO - 3.3V supply (HDMI Tx I/O)R33 HDVDD - 1.05V supply (HDMI analog VDD)R34 HDVSS - Analog ground for HDMIR35 HDVSS - Analog ground for HDMIT1 XO O Crystal OutputT2 CLKSEL I OSC27/CLK27IN Select SignalT3 GND - Ground for digital and DDR2 SDRAMT4 VDD18 - 1.8V supply (DDR2 SDRAM)T5 D0DQ9 I/O DDR2 Data Input/OutputT6 GND - Ground for digital and DDR2 SDRAMT7 VDD18 - 1.8V supply (DDR2 SDRAM)T8 PTEST08 I/O Test I/F (HDD8)T9 PTEST16 I Test I/F (HRESETB)T10 VOID - This pin is not ball.T11 VOID - This pin is not ball.T12 VOID - This pin is not ball.T13 VDD10 - 1.05V supply (core)T14 VDD10 - 1.05V supply (core)T15 PTEST03 I/O Test I/F (HDD3)T16 PTEST13 I/O Test I/F (HDD13)T17 PTEST24 I Test I/F (HDA2)T18 GND - Ground for digital and DDR2 SDRAMT19 GND - Ground for digital and DDR2 SDRAMT20 GND - Ground for digital and DDR2 SDRAMT21 GND - Ground for digital and DDR2 SDRAM

6-10

BDP-S360

Pin No. Name I/O DescriptionT22 VDD10 - 1.05V supply (core)T23 VDD10 - 1.05V supply (core)T24 VOID - This pin is not ball.T25 VOID - This pin is not ball.T26 VOID - This pin is not ball.T27 GND - Ground for digital and DDR2 SDRAMT28 GND - Ground for digital and DDR2 SDRAMT29 HDVSS - Analog ground for HDMIT30 HDVSS - Analog ground for HDMIT31 HHPD I HDMI Hot Plug DetectT32 ETMDC O Ether Management Clock OutputT33 ETMDIO I/O Ether Management Data Input/OutputT34 ETREFCLK I Ether Reference Clock InputT35 VDD3 - 3.3V supply (I/O buffers)U1 GND - Ground for digital and DDR2 SDRAMU2 GND - Ground for digital and DDR2 SDRAMU3 D0DQ10 I/O DDR2 Data Input/OutputU4 D0DM1 I/O DDR2 Data MaskU5 GND - Ground for digital and DDR2 SDRAMU6 D0DQ11 I/O DDR2 Data Input/OutputU7 D0DQ8 I/O DDR2 Data Input/OutputU8 VDD18 - 1.8V supply (DDR2 SDRAM)U9 GND - Ground for digital and DDR2 SDRAMU10 VOID - This pin is not ball.U11 VOID - This pin is not ball.U12 VOID - This pin is not ball.U13 TEST1 I Test I/FU14 PTEST07 I/O Test I/F (HDD7)U15 PTEST09 I/O Test I/F (HDD9)U16 PTEST04 I/O Test I/F (HDD4)U17 GND - Ground for digital and DDR2 SDRAMU18 GND - Ground for digital and DDR2 SDRAMU19 GND - Ground for digital and DDR2 SDRAMU20 GND - Ground for digital and DDR2 SDRAMU21 GND - Ground for digital and DDR2 SDRAMU22 GND - Ground for digital and DDR2 SDRAMU23 GND - Ground for digital and DDR2 SDRAMU24 VOID - This pin is not ball.U25 VOID - This pin is not ball.U26 VOID - This pin is not ball.U27 HDSCL I/O HDMI DDC ClockU28 HDVSS - Analog ground for HDMIU29 ETRXER I Ether RX Error DetectionU30 ETRXD0 I Ether RX Data InputU31 ETRXD1 I Ether RX Data InputU32 VDD3 - 3.3V supply (I/O buffers)U33 ETCRS I Ether RX Data EnableU34 GND - Ground for digital and DDR2 SDRAMU35 GND - Ground for digital and DDR2 SDRAMV1 D0DQS1 I/O DDR2 Positive Data StrobeV2 D0DQS1B I/O DDR2 Negative Data StrobeV3 GND - Ground for digital and DDR2 SDRAMV4 D0DQ13 I/O DDR2 Data Input/OutputV5 GND - Ground for digital and DDR2 SDRAMV6 D0DQ12 I/O DDR2 Data Input/OutputV7 D0DQ14 I/O DDR2 Data Input/OutputV8 GND - Ground for digital and DDR2 SDRAMV9 D0VDD10 - 1.05V supply (DDR2 SDRAM DLL)V10 VOID - This pin is not ball.V11 VOID - This pin is not ball.V12 VOID - This pin is not ball.

6-11

BDP-S360

Pin No. Name I/O DescriptionV13 GND - Ground for digital and DDR2 SDRAMV14 GND - Ground for digital and DDR2 SDRAMV15 GND - Ground for digital and DDR2 SDRAMV16 GND - Ground for digital and DDR2 SDRAMV17 GND - Ground for digital and DDR2 SDRAMV18 GND - Ground for digital and DDR2 SDRAMV19 GND - Ground for digital and DDR2 SDRAMV20 GND - Ground for digital and DDR2 SDRAMV21 GND - Ground for digital and DDR2 SDRAMV22 HAVDD - 3.3V supply (HDMI Analog VDD)V23 HAVSS - Analog ground for HDMIV24 VOID - This pin is not ball.V25 VOID - This pin is not ball.V26 VOID - This pin is not ball.V27 HDSDA I/O HDMI DDC DataV28 VDD10 - 1.05V supply (core)V29 VDD10 - 1.05V supply (core)V30 ETTXD1 O Ether TX Data OutputV31 ETTXD0 O Ether TX Data OutputV32 ETTXEN O Ether TX Data EnableV33 GND - Ground for digital and DDR2 SDRAMV34 USBDP2 I/O USB D+ signalV35 USBRSDP2 I/O USB Full/low speed D+ signalW1 GND - Ground for digital and DDR2 SDRAMW2 GND - Ground for digital and DDR2 SDRAMW3 D0DQ15 I/O DDR2 Data Input/OutputW4 GND - Ground for digital and DDR2 SDRAMW5 D0DQ1 I/O DDR2 Data Input/OutputW6 D0DQ3 I/O DDR2 Data Input/OutputW7 D0DQ0 I/O DDR2 Data Input/OutputW8 VDD18 - 1.8V supply (DDR2 SDRAM)W9 VDD18 - 1.8V supply (DDR2 SDRAM)W10 VOID - This pin is not ball.W11 VOID - This pin is not ball.W12 VOID - This pin is not ball.W13 PVDD - 1.05V supply for PLLW14 PGND - Ground for PLLW15 GND - Ground for digital and DDR2 SDRAMW16 GND - Ground for digital and DDR2 SDRAMW17 GND - Ground for digital and DDR2 SDRAMW18 GND - Ground for digital and DDR2 SDRAMW19 GND - Ground for digital and DDR2 SDRAMW20 GND - Ground for digital and DDR2 SDRAMW21 GND - Ground for digital and DDR2 SDRAMW22 GND - Ground for digital and DDR2 SDRAMW23 GND - Ground for digital and DDR2 SDRAMW24 VOID - This pin is not ball.W25 VOID - This pin is not ball.W26 VOID - This pin is not ball.W27 GND - Ground for digital and DDR2 SDRAMW28 GND - Ground for digital and DDR2 SDRAMW29 GND - Ground for digital and DDR2 SDRAMW30 USBOCI2 I USB Over-current statusW31 USBOCI1 I USB Over-current statusW32 GND - Ground for digital and DDR2 SDRAMW33 USBDGND - Ground for USBW34 USBDM2 I/O USB D- signalW35 USBRSDM2 I/O USB Full/low speed D- signalY1 D0CLK0B O DDR2 Negative ClockY2 D0CLK0 O DDR2 Positive ClockY3 GND - Ground for digital and DDR2 SDRAM

6-12

BDP-S360

Pin No. Name I/O DescriptionY4 D0DM0 I/O DDR2 Data MaskY5 GND - Ground for digital and DDR2 SDRAMY6 D0DQ2 I/O DDR2 Data Input/OutputY7 D0DQ5 I/O DDR2 Data Input/OutputY8 VDD18 - 1.8V supply (DDR2 SDRAM)Y9 D0VDD10 - 1.05V supply (DDR2 SDRAM DLL)Y10 VOID - This pin is not ball.Y11 VOID - This pin is not ball.Y12 VOID - This pin is not ball.Y13 PVDD - 1.05V supply for PLLY14 PGND - Ground for PLLY15 GND - Ground for digital and DDR2 SDRAMY16 GND - Ground for digital and DDR2 SDRAMY17 GND - Ground for digital and DDR2 SDRAMY18 GND - Ground for digital and DDR2 SDRAMY19 GND - Ground for digital and DDR2 SDRAMY20 GND - Ground for digital and DDR2 SDRAMY21 GND - Ground for digital and DDR2 SDRAMY22 VDD10 - 1.05V supply (core)Y23 VDD10 - 1.05V supply (core)Y24 VOID - This pin is not ball.Y25 VOID - This pin is not ball.Y26 VOID - This pin is not ball.Y27 VDD3 - 3.3V supply (I/O buffers)Y28 VDD3 - 3.3V supply (I/O buffers)Y29 VDD3 - 3.3V supply (I/O buffers)Y30 USBPPON2 O USB Power ControlY31 USBPPON1 O USB Power ControlY32 USBVDD33 - 3.3V supply for USBY33 USBVDD33 - 3.3V supply for USBY34 USBDGND - Ground for USBY35 USBDGND - Ground for USBAA1 GND - Ground for digital and DDR2 SDRAMAA2 GND - Ground for digital and DDR2 SDRAMAA3 D0DQ7 I/O DDR2 Data Input/OutputAA4 D0DQ4 I/O DDR2 Data Input/OutputAA5 VDD18 - 1.8V supply (DDR2 SDRAM)AA6 D0DQ6 I/O DDR2 Data Input/OutputAA7 D0WEB O DDR2 Command Write EnableAA8 GND - Ground for digital and DDR2 SDRAMAA9 GND - Ground for digital and DDR2 SDRAMAA10 VOID - This pin is not ball.AA11 VOID - This pin is not ball.AA12 VOID - This pin is not ball.AA13 GND - Ground for digital and DDR2 SDRAMAA14 GND - Ground for digital and DDR2 SDRAMAA15 GND - Ground for digital and DDR2 SDRAMAA16 GND - Ground for digital and DDR2 SDRAMAA17 GND - Ground for digital and DDR2 SDRAMAA18 GND - Ground for digital and DDR2 SDRAMAA19 GND - Ground for digital and DDR2 SDRAMAA20 GND - Ground for digital and DDR2 SDRAMAA21 GND - Ground for digital and DDR2 SDRAMAA22 GND - Ground for digital and DDR2 SDRAMAA23 GND - Ground for digital and DDR2 SDRAMAA24 VOID - This pin is not ball.AA25 VOID - This pin is not ball.AA26 VOID - This pin is not ball.AA27 GND - Ground for digital and DDR2 SDRAMAA28 GND - Ground for digital and DDR2 SDRAMAA29 GND - Ground for digital and DDR2 SDRAM

6-13

BDP-S360

Pin No. Name I/O DescriptionAA30 GND - Ground for digital and DDR2 SDRAMAA31 GND - Ground for digital and DDR2 SDRAMAA32 USBPVDDFIL O USB Connector for USBPGNDAA33 USBPVSS - Analog ground for USB PLLAA34 USBDP1 I/O USB D+ signalAA35 USBRSDP1 I/O USB Full/low speed D+ signalAB1 D0DQS0 I/O DDR2 Positive Data StrobeAB2 D0DQS0B I/O DDR2 Negative Data StrobeAB3 GND - Ground for digital and DDR2 SDRAMAB4 VDD18 - 1.8V supply (DDR2 SDRAM)AB5 D0CKE O DDR2 Clock EnableAB6 D0CKERSTB I DDR2 D0CKERSTB output controlAB7 D0ADD10 O DDR2 Address OutputAB8 GND - Ground for digital and DDR2 SDRAMAB9 D0VREF I DDR2 Reference VoltageAB10 VOID - This pin is not ball.AB11 VOID - This pin is not ball.AB12 VOID - This pin is not ball.AB13 VDD10 - 1.05V supply (core)AB14 VDD10 - 1.05V supply (core)AB15 GND - Ground for digital and DDR2 SDRAMAB16 PGND - Ground for PLLAB17 PGND - Ground for PLLAB18 GND - Ground for digital and DDR2 SDRAMAB19 GND - Ground for digital and DDR2 SDRAMAB20 VDD10 - 1.05V supply (core)AB21 GND - Ground for digital and DDR2 SDRAMAB22 VDD10 - 1.05V supply (core)AB23 VDD10 - 1.05V supply (core)AB24 VOID - This pin is not ball.AB25 VOID - This pin is not ball.AB26 VOID - This pin is not ball.AB27 PVDD - 1.05V supply for PLLAB28 PGND - Ground for PLLAB29 PVDD - 1.05V supply for PLLAB30 VDD10 - 1.05V supply (core)AB31 VDD3 - 3.3V supply (I/O buffers)AB32 GPIO18 I/O AOHBCK: BCK Output for External HDMI DeviceAB33 GPIO32 I/O AOHBD3: Data Output for External HDMI DeviceAB34 USBDM1 I/O USB D- signalAB35 USBRSDM1 I/O USB Full/low speed D- signalAC1 GND - Ground for digital and DDR2 SDRAMAC2 GND - Ground for digital and DDR2 SDRAMAC3 VDD18 - 1.8V supply (DDR2 SDRAM)AC4 GND - Ground for digital and DDR2 SDRAMAC5 D0ADD7 O DDR2 Address OutputAC6 D0ADD14 O DDR2 Address OutputAC7 D0ADD12 O DDR2 Address OutputAC8 GND - Ground for digital and DDR2 SDRAMAC9 GND - Ground for digital and DDR2 SDRAMAC10 VOID - This pin is not ball.AC11 VOID - This pin is not ball.AC12 VOID - This pin is not ball.AC13 VDD10 - 1.05V supply (core)AC14 VDD10 - 1.05V supply (core)AC15 GND - Ground for digital and DDR2 SDRAMAC16 PVDD - 1.05V supply for PLLAC17 PVDD - 1.05V supply for PLLAC18 GND - Ground for digital and DDR2 SDRAMAC19 GND - Ground for digital and DDR2 SDRAMAC20 VDD10 - 1.05V supply (core)

6-14

BDP-S360

Pin No. Name I/O DescriptionAC21 GND - Ground for digital and DDR2 SDRAMAC22 VDD10 - 1.05V supply (core)AC23 VDD10 - 1.05V supply (core)AC24 VOID - This pin is not ball.AC25 VOID - This pin is not ball.AC26 VOID - This pin is not ball.AC27 PGND - Ground for PLLAC28 PGND - Ground for PLLAC29 PVDD - 1.05V supply for PLLAC30 GPIO16 I/O AOHTX: IEC60958 Output for External HDMI DeviceAC31 GPIO17 I/O AOHLRCK: LRCK Clock Output for External HDMI DeviceAC32 GPIO33 I/O AOHMCK: Master Clock Output for External HDMI DeviceAC33 GPIO31 I/O AOHBD2: Data Output for External HDMI DeviceAC34 USBAVDD - Analog 3.3V supply for USBAC35 USBRREF I USB Connector for USBAGNDAD1 VDD18 - 1.8V supply (DDR2 SDRAM)AD2 VDD18 - 1.8V supply (DDR2 SDRAM)AD3 D0BA1 O DDR2 Bank AddressAD4 D0ADD1 O DDR2 Address OutputAD5 D0ADD6 O DDR2 Address OutputAD6 D0ADD4 O DDR2 Address OutputAD7 D0CASB O DDR2 Colmun Address Strobe SignalAD8 GND - Ground for digital and DDR2 SDRAMAD9 D0VDD10 - 1.05V supply (DDR2 SDRAM DLL)AD10 VOID - This pin is not ball.AD11 VOID - This pin is not ball.AD12 VOID - This pin is not ball.AD13 VOID - This pin is not ball.AD14 VOID - This pin is not ball.AD15 VOID - This pin is not ball.AD16 VOID - This pin is not ball.AD17 VOID - This pin is not ball.AD18 VOID - This pin is not ball.AD19 VOID - This pin is not ball.AD20 VOID - This pin is not ball.AD21 VOID - This pin is not ball.AD22 VOID - This pin is not ball.AD23 VOID - This pin is not ball.AD24 VOID - This pin is not ball.AD25 VOID - This pin is not ball.AD26 VOID - This pin is not ball.AD27 VDD3 - 3.3V supply (I/O buffers)AD28 VDD3 - 3.3V supply (I/O buffers)AD29 GPIO30 I/O AOHBD1: Data Output for External HDMI DeviceAD30 GPIO19 I/O AOHBD0: Data Output for External HDMI DeviceAD31 PCIRSTB I PCI I/F PCI Hardware ResetAD32 PCICLKI I PCI 33MHz Clock Input/27MHz Clock Input for System ClockAD33 GND - Ground for digital and DDR2 SDRAMAD34 USBCOM - Analog ground for USB (bulk)AD35 USBAVSS - Analog ground for USBAE1 D0BA0 O DDR2 Bank AddressAE2 D0ADD9 O DDR2 Address OutputAE3 D0ADD3 O DDR2 Address OutputAE4 D0ADD5 O DDR2 Address OutputAE5 D0ADD11 O DDR2 Address OutputAE6 D0ADD0 O DDR2 Address OutputAE7 GND - Ground for digital and DDR2 SDRAMAE8 VDD18 - 1.8V supply (DDR2 SDRAM)AE9 VDD18 - 1.8V supply (DDR2 SDRAM)AE10 VOID - This pin is not ball.AE11 VOID - This pin is not ball.

6-15

BDP-S360

Pin No. Name I/O DescriptionAE12 VOID - This pin is not ball.AE13 VOID - This pin is not ball.AE14 VOID - This pin is not ball.AE15 VOID - This pin is not ball.AE16 VOID - This pin is not ball.AE17 VOID - This pin is not ball.AE18 VOID - This pin is not ball.AE19 VOID - This pin is not ball.AE20 VOID - This pin is not ball.AE21 VOID - This pin is not ball.AE22 VOID - This pin is not ball.AE23 VOID - This pin is not ball.AE24 VOID - This pin is not ball.AE25 VOID - This pin is not ball.AE26 VOID - This pin is not ball.AE27 GND - Ground for digital and DDR2 SDRAMAE28 GND - Ground for digital and DDR2 SDRAMAE29 RDATA15/GDATA15 I/O ROM Data Input/OutputAE30 RDATA14/GDATA14 I/O ROM Data Input/OutputAE31 RDATA13/GDATA13 I/O ROM Data Input/OutputAE32 RDATA12/GDATA12 I/O ROM Data Input/OutputAE33 RDATA11/GDATA11 I/O ROM Data Input/OutputAE34 VDD3 - 3.3V supply (I/O buffers)AE35 USBXO O USB Clock output from OscillatorAF1 D0ADD13 O DDR2 Address OutputAF2 D0ADD8 O DDR2 Address OutputAF3 GND - Ground for digital and DDR2 SDRAMAF4 D0CS1B O DDR2 Chip Select/Bank AddressAF5 D0ODT1 O DDR2 On Die terminal controlAF6 GND - Ground for digital and DDR2 SDRAMAF7 D0ODT0 O DDR2 On Die terminal controlAF8 VDD18 - 1.8V supply (DDR2 SDRAM)AF9 D0VDD10 - 1.05V supply (DDR2 SDRAM DLL)AF10 VOID - This pin is not ball.AF11 VOID - This pin is not ball.AF12 VOID - This pin is not ball.AF13 VOID - This pin is not ball.AF14 VOID - This pin is not ball.AF15 VOID - This pin is not ball.AF16 VOID - This pin is not ball.AF17 VOID - This pin is not ball.AF18 VOID - This pin is not ball.AF19 VOID - This pin is not ball.AF20 VOID - This pin is not ball.AF21 VOID - This pin is not ball.AF22 VOID - This pin is not ball.AF23 VOID - This pin is not ball.AF24 VOID - This pin is not ball.AF25 VOID - This pin is not ball.AF26 VOID - This pin is not ball.AF27 VDD10 - 1.05V supply (core)AF28 VDD10 - 1.05V supply (core)AF29 RDATA10/GDATA10 I/O ROM Data Input/OutputAF30 RDATA9/GDATA9 I/O ROM Data Input/OutputAF31 RDATA8/GDATA8 I/O ROM Data Input/OutputAF32 RDATA7/GDATA7 I/O ROM Data Input/OutputAF33 RDATA6/GDATA6 I/O ROM Data Input/OutputAF34 GND - Ground for digital and DDR2 SDRAMAF35 USBXI I USB Clock input to OscillatorAG1 GND - Ground for digital and DDR2 SDRAMAG2 GND - Ground for digital and DDR2 SDRAM

6-16

BDP-S360

Pin No. Name I/O DescriptionAG3 D0ADD2 O DDR2 Address OutputAG4 D0CS0B O DDR2 Chip SelectAG5 D0RASB O DDR2 Raw Address Strobe SignalAG6 D0DQ22 I/O DDR2 Data Input/OutputAG7 D0ADD15 O DDR2 Address OutputAG8 GND - Ground for digital and DDR2 SDRAMAG9 VDD18 - 1.8V supply (DDR2 SDRAM)AG10 GND - Ground for digital and DDR2 SDRAMAG11 VDD18 - 1.8V supply (DDR2 SDRAM)AG12 GND - Ground for digital and DDR2 SDRAMAG13 D1VDD10 - 1.05V supply (DDR2 SDRAM DLL)AG14 VDD18 - 1.8V supply (DDR2 SDRAM)AG15 D1VDD10 - 1.05V supply (DDR2 SDRAM DLL)AG16 GND - Ground for digital and DDR2 SDRAMAG17 D1VREF I DDR2 Reference VoltageAG18 GND - Ground for digital and DDR2 SDRAMAG19 D1VDD10 - 1.05V supply (DDR2 SDRAM DLL)AG20 VDD18 - 1.8V supply (DDR2 SDRAM)AG21 D1VDD10 - 1.05V supply (DDR2 SDRAM DLL)AG22 GND - Ground for digital and DDR2 SDRAMAG23 VDD3 - 3.3V supply (I/O buffers)AG24 GND - Ground for digital and DDR2 SDRAMAG25 VDD10 - 1.05V supply (core)AG26 GND - Ground for digital and DDR2 SDRAMAG27 GND - Ground for digital and DDR2 SDRAMAG28 N.U. I Fixed at "H"AG29 RDATA5/GDATA5 I/O ROM Data Input/OutputAG30 RDATA4/GDATA4 I/O ROM Data Input/OutputAG31 VDD3 - 3.3V supply (I/O buffers)AG32 RDATA3/GDATA3 I/O ROM Data Input/OutputAG33 RDATA2/GDATA2 I/O ROM Data Input/OutputAG34 RDATA1/GDATA1 I/O ROM Data Input/OutputAG35 GND - Ground for digital and DDR2 SDRAMAH1 D0DQS2 I/O DDR2 Positive Data StrobeAH2 D0DQS2B I/O DDR2 Negative Data StrobeAH3 GND - Ground for digital and DDR2 SDRAMAH4 D0DQ21 I/O DDR2 Data Input/OutputAH5 D0DQ23 I/O DDR2 Data Input/OutputAH6 D0DQ20 I/O DDR2 Data Input/OutputAH7 GND - Ground for digital and DDR2 SDRAMAH8 VDD18 - 1.8V supply (DDR2 SDRAM)AH9 GND - Ground for digital and DDR2 SDRAMAH10 VDD18 - 1.8V supply (DDR2 SDRAM)AH11 GND - Ground for digital and DDR2 SDRAMAH12 VDD18 - 1.8V supply (DDR2 SDRAM)AH13 VDD18 - 1.8V supply (DDR2 SDRAM)AH14 VDD18 - 1.8V supply (DDR2 SDRAM)AH15 GND - Ground for digital and DDR2 SDRAMAH16 GND - Ground for digital and DDR2 SDRAMAH17 GND - Ground for digital and DDR2 SDRAMAH18 GND - Ground for digital and DDR2 SDRAMAH19 VDD18 - 1.8V supply (DDR2 SDRAM)AH20 VDD18 - 1.8V supply (DDR2 SDRAM)AH21 GND - Ground for digital and DDR2 SDRAMAH22 GND - Ground for digital and DDR2 SDRAMAH23 VDD3 - 3.3V supply (I/O buffers)AH24 GND - Ground for digital and DDR2 SDRAMAH25 VDD10 - 1.05V supply (core)AH26 GPIO24 O NAND_WP (L: Write Protect)AH27 GPIO26 O XAMUTE (L: MUTE)AH28 GND - Ground for digital and DDR2 SDRAM

6-17

BDP-S360

Pin No. Name I/O DescriptionAH29 RDATA0/GDATA0 I/O ROM Data Input/OutputAH30 RADD25/GADD25 O ROM Address OutputAH31 RADD24/GADD24 O ROM Address OutputAH32 GND - Ground for digital and DDR2 SDRAMAH33 RADD23/GADD23 O ROM Address OutputAH34 RADD22/GADD22 O ROM Address OutputAH35 RADD21/GADD21 O ROM Address OutputAJ1 GND - Ground for digital and DDR2 SDRAMAJ2 GND - Ground for digital and DDR2 SDRAMAJ3 D0DQ18 I/O DDR2 Data Input/OutputAJ4 D0DQ16 I/O DDR2 Data Input/OutputAJ5 D0DQ30 I/O DDR2 Data Input/OutputAJ6 D0DQ19 I/O DDR2 Data Input/OutputAJ7 VDD18 - 1.8V supply (DDR2 SDRAM)AJ8 GND - Ground for digital and DDR2 SDRAMAJ9 VDD18 - 1.8V supply (DDR2 SDRAM)AJ10 GND - Ground for digital and DDR2 SDRAMAJ11 VDD18 - 1.8V supply (DDR2 SDRAM)AJ12 GND - Ground for digital and DDR2 SDRAMAJ13 VDD18 - 1.8V supply (DDR2 SDRAM)AJ14 GND - Ground for digital and DDR2 SDRAMAJ15 D1RQ1 O DDR2 Pull up (150 ohm) to DDR2 SDRAM power supplyAJ16 D1RQ0 O DDR2 Pull down (150 ohm) to DDR2 SDRAM GNDAJ17 GND - Ground for digital and DDR2 SDRAMAJ18 VDD18 - 1.8V supply (DDR2 SDRAM)AJ19 GND - Ground for digital and DDR2 SDRAMAJ20 GND - Ground for digital and DDR2 SDRAMAJ21 VDD18 - 1.8V supply (DDR2 SDRAM)AJ22 VDD18 - 1.8V supply (DDR2 SDRAM)AJ23 GND - Ground for digital and DDR2 SDRAMAJ24 GND - Ground for digital and DDR2 SDRAMAJ25 VDD3 - 3.3V supply (I/O buffers)AJ26 GPIO25 O IT_REQ (Communication request for front micon)AJ27 GPIO28 O EMMA_CSI0_DAC2_XCS (L: Active)AJ28 GPIO23 O GLB_XRST (L: RESET)AJ29 RADD20/GADD20 O ROM Address OutputAJ30 RADD19/GADD19 O ROM Address OutputAJ31 RADD18/GADD18 O ROM Address OutputAJ32 RADD17/GADD17 O ROM Address OutputAJ33 RADD16/GADD16 O ROM Address OutputAJ34 RADD15/GADD15 O ROM Address OutputAJ35 VDD3 - 3.3V supply (I/O buffers)AK1 D0CLK1B O DDR2 Negative ClockAK2 D0CLK1 O DDR2 Positive ClockAK3 GND - Ground for digital and DDR2 SDRAMAK4 D0DM2 I/O DDR2 Data MaskAK5 D0DQ28 I/O DDR2 Data Input/OutputAK6 D0DQ17 I/O DDR2 Data Input/OutputAK7 GND - Ground for digital and DDR2 SDRAMAK8 VDD18 - 1.8V supply (DDR2 SDRAM)AK9 GND - Ground for digital and DDR2 SDRAMAK10 D1DQ24 I/O DDR2 Data Input/OutputAK11 D1DQ25 I/O DDR2 Data Input/OutputAK12 GND - Ground for digital and DDR2 SDRAMAK13 VDD18 - 1.8V supply (DDR2 SDRAM)AK14 VDD18 - 1.8V supply (DDR2 SDRAM)AK15 GND - Ground for digital and DDR2 SDRAMAK16 GND - Ground for digital and DDR2 SDRAMAK17 VDD18 - 1.8V supply (DDR2 SDRAM)AK18 D1ADD9 O DDR2 Address OutputAK19 D1ADD1 O DDR2 Address Output

6-18

BDP-S360

Pin No. Name I/O DescriptionAK20 VDD18 - 1.8V supply (DDR2 SDRAM)AK21 GND - Ground for digital and DDR2 SDRAMAK22 VDD18 - 1.8V supply (DDR2 SDRAM)AK23 VDD18 - 1.8V supply (DDR2 SDRAM)AK24 VDD18 - 1.8V supply (DDR2 SDRAM)AK25 GND - Ground for digital and DDR2 SDRAMAK26 GPIO29 O DAC_XRST (L: RESET)AK27 N.U. I Fixed at "H"AK28 GPIO27 I/O XVMUTE (Video Mute ON="0")AK29 RADD14/GADD14 O ROM Address OutputAK30 GND - Ground for digital and DDR2 SDRAMAK31 RADD13/GADD13 O ROM Address OutputAK32 RADD12/GADD12 O ROM Address OutputAK33 RADD11/GADD11 O ROM Address OutputAK34 RADD10/GADD10 O ROM Address OutputAK35 RADD9/GADD9 O ROM Address OutputAL1 GND - Ground for digital and DDR2 SDRAMAL2 GND - Ground for digital and DDR2 SDRAMAL3 D0DQ26 I/O DDR2 Data Input/OutputAL4 D0DQ24 I/O DDR2 Data Input/OutputAL5 D0DQ31 I/O DDR2 Data Input/OutputAL6 D0DQ29 I/O DDR2 Data Input/OutputAL7 VDD18 - 1.8V supply (DDR2 SDRAM)AL8 GND - Ground for digital and DDR2 SDRAMAL9 D1DQ26 I/O DDR2 Data Input/OutputAL10 D1DQ27 I/O DDR2 Data Input/OutputAL11 D1DQ31 I/O DDR2 Data Input/OutputAL12 D1DQ16 I/O DDR2 Data Input/OutputAL13 D1DQ20 I/O DDR2 Data Input/OutputAL14 D1DQ21 I/O DDR2 Data Input/OutputAL15 GND - Ground for digital and DDR2 SDRAMAL16 D1ADD4 O DDR2 Address OutputAL17 D1ADD6 O DDR2 Address OutputAL18 D1WEB O DDR2 Command Write EnableAL19 D1BA1 O DDR2 Bank AddressAL20 D1DQ1 I/O DDR2 Data Input/OutputAL21 D1DQ0 I/O DDR2 Data Input/OutputAL22 D1DQ14 I/O DDR2 Data Input/OutputAL23 D1DQ10 I/O DDR2 Data Input/OutputAL24 D1DQ11 I/O DDR2 Data Input/OutputAL25 D1DQ9 I/O DDR2 Data Input/OutputAL26 GND - Ground for digital and DDR2 SDRAMAL27 VDD3 - 3.3V supply (I/O buffers)AL28 GND - Ground for digital and DDR2 SDRAMAL29 RADD8/GADD8 O ROM Address OutputAL30 RADD7/GADD7 O ROM Address OutputAL31 VDD3 - 3.3V supply (I/O buffers)AL32 RADD6/GADD6 O ROM Address OutputAL33 RADD5/GADD5 O ROM Address OutputAL34 RADD4/GADD4 O ROM Address OutputAL35 GND - Ground for digital and DDR2 SDRAMAM1 D0DQS3 I/O DDR2 Positive Data StrobeAM2 D0DQS3B I/O DDR2 Negative Data StrobeAM3 GND - Ground for digital and DDR2 SDRAMAM4 D0DM3 I/O DDR2 Data MaskAM5 D0DQ25 I/O DDR2 Data Input/OutputAM6 VDD18 - 1.8V supply (DDR2 SDRAM)AM7 GND - Ground for digital and DDR2 SDRAMAM8 D1DQ28 I/O DDR2 Data Input/OutputAM9 D1DM3 I/O DDR2 Data MaskAM10 D1DQ18 I/O DDR2 Data Input/Output

6-19

BDP-S360

Pin No. Name I/O DescriptionAM11 D1DQ22 I/O DDR2 Data Input/OutputAM12 VDD18 - 1.8V supply (DDR2 SDRAM)AM13 D1DM2 I/O DDR2 Data MaskAM14 D1DQ23 I/O DDR2 Data Input/OutputAM15 D1CS1B O DDR2 Chip Select/Bank AddressAM16 D1ADD14 O DDR2 Address OutputAM17 D1ADD12 O DDR2 Address OutputAM18 GND - Ground for digital and DDR2 SDRAMAM19 D1CKE O DDR2 Clock EnableAM20 D1DM0 I/O DDR2 Data MaskAM21 D1DQ3 I/O DDR2 Data Input/OutputAM22 D1DQ2 I/O DDR2 Data Input/OutputAM23 VDD18 - 1.8V supply (DDR2 SDRAM)AM24 D1DQ8 I/O DDR2 Data Input/OutputAM25 D1DQ13 I/O DDR2 Data Input/OutputAM26 D1DM1 I/O DDR2 Data MaskAM27 GND - Ground for digital and DDR2 SDRAMAM28 FCSB0 O ROM Chip selectAM29 FCSB1 O ROM Chip selectAM30 FCSB2 O ROM Chip select (Not used)AM31 FCSB3 O ROM Chip select (Not used)AM32 GND - Ground for digital and DDR2 SDRAMAM33 RADD3/GADD3 O ROM Address OutputAM34 RADD2/GADD2 O ROM Address OutputAM35 RADD1/GADD1 O ROM Address OutputAN1 VOID - This pin is not ball.AN2 GND - Ground for digital and DDR2 SDRAMAN3 D0DQ27 I/O DDR2 Data Input/OutputAN4 GND - Ground for digital and DDR2 SDRAMAN5 VDD18 - 1.8V supply (DDR2 SDRAM)AN6 GND - Ground for digital and DDR2 SDRAMAN7 D1DQ30 I/O DDR2 Data Input/OutputAN8 GND - Ground for digital and DDR2 SDRAMAN9 D1DQ29 I/O DDR2 Data Input/OutputAN10 D1DQ17 I/O DDR2 Data Input/OutputAN11 VDD18 - 1.8V supply (DDR2 SDRAM)AN12 GND - Ground for digital and DDR2 SDRAMAN13 D1ADD15 O DDR2 Address OutputAN14 D1ADD2 O DDR2 Address OutputAN15 D1ADD0 O DDR2 Address OutputAN16 D1ADD7 O DDR2 Address OutputAN17 D1ADD13 O DDR2 Address OutputAN18 D1CKERSTB I DDR2 D0CKERSTB output controlAN19 GND - Ground for digital and DDR2 SDRAMAN20 D1DQ6 I/O DDR2 Data Input/OutputAN21 D1DQ4 I/O DDR2 Data Input/OutputAN22 VDD18 - 1.8V supply (DDR2 SDRAM)AN23 GND - Ground for digital and DDR2 SDRAMAN24 D1DQ12 I/O DDR2 Data Input/OutputAN25 GND - Ground for digital and DDR2 SDRAMAN26 D1DQ15 I/O DDR2 Data Input/OutputAN27 GND - Ground for digital and DDR2 SDRAMAN28 VDD18 - 1.8V supply (DDR2 SDRAM)AN29 VDD3 - 3.3V supply (I/O buffers)AN30 GRDYB I GIO I/F Ready for external device Not used)AN31 FOEB/GOEB O NOR Flash ROM Output EnableAN32 FWEB/GWEB O NOR Flash ROM Write EnableAN33 VDD3 - 3.3V supply (I/O buffers)AN34 RADD0/GADD0 O ROM Address OutputAN35 VOID - This pin is not ball.AP1 VOID - This pin is not ball.

6-20

BDP-S360

Pin No. Name I/O DescriptionAP2 VOID - This pin is not ball.AP3 GND - Ground for digital and DDR2 SDRAMAP4 D1DQS3B I/O DDR2 Negative Data StrobeAP5 GND - Ground for digital and DDR2 SDRAMAP6 D1CLK1 O DDR2 Positive ClockAP7 GND - Ground for digital and DDR2 SDRAMAP8 D1DQS2B I/O DDR2 Negative Data StrobeAP9 GND - Ground for digital and DDR2 SDRAMAP10 VDD18 - 1.8V supply (DDR2 SDRAM)AP11 GND - Ground for digital and DDR2 SDRAMAP12 D1RASB O DDR2 Raw Address Strobe SignalAP13 D1CS0B O DDR2 Chip SelectAP14 D1CASB O DDR2 Colmun Address Strobe SignalAP15 GND - Ground for digital and DDR2 SDRAMAP16 VDD18 - 1.8V supply (DDR2 SDRAM)AP17 D1ADD8 O DDR2 Address OutputAP18 D1ADD10 O DDR2 Address OutputAP19 D1ADD3 O DDR2 Address OutputAP20 GND - Ground for digital and DDR2 SDRAMAP21 VDD18 - 1.8V supply (DDR2 SDRAM)AP22 GND - Ground for digital and DDR2 SDRAMAP23 D1DQS0B I/O DDR2 Negative Data StrobeAP24 GND - Ground for digital and DDR2 SDRAMAP25 D1CLK0 O DDR2 Positive ClockAP26 GND - Ground for digital and DDR2 SDRAMAP27 D1DQS1B I/O DDR2 Negative Data StrobeAP28 GND - Ground for digital and DDR2 SDRAMAP29 VDD18 - 1.8V supply (DDR2 SDRAM)AP30 NRBB I NAND Flash ROM Ready/BusyAP31 NCLE O NAND Flash ROM Command Latch EnableAP32 GCSB0 O GIO I/F Chip selectAP33 GCSB1 O GIO I/F Chip select (Not used)AP34 VOID - This pin is not ball.AP35 VOID - This pin is not ball.AR1 VOID - This pin is not ball.AR2 VOID - This pin is not ball.AR3 VOID - This pin is not ball.AR4 D1DQS3 I/O DDR2 Positive Data StrobeAR5 GND - Ground for digital and DDR2 SDRAMAR6 D1CLK1B O DDR2 Negative ClockAR7 GND - Ground for digital and DDR2 SDRAMAR8 D1DQS2 I/O DDR2 Positive Data StrobeAR9 GND - Ground for digital and DDR2 SDRAMAR10 VDD18 - 1.8V supply (DDR2 SDRAM)AR11 D1DQ19 I/O DDR2 Data Input/OutputAR12 D1ODT0 O DDR2 On Die terminal controlAR13 D1ODT1 O DDR2 On Die terminal controlAR14 D1ADD11 O DDR2 Address OutputAR15 VDD18 - 1.8V supply (DDR2 SDRAM)AR16 GND - Ground for digital and DDR2 SDRAMAR17 D1ADD5 O DDR2 Address OutputAR18 D1BA0 O DDR2 Bank AddressAR19 D1DQ7 I/O DDR2 Data Input/OutputAR20 D1DQ5 I/O DDR2 Data Input/OutputAR21 VDD18 - 1.8V supply (DDR2 SDRAM)AR22 GND - Ground for digital and DDR2 SDRAMAR23 D1DQS0 I/O DDR2 Positive Data StrobeAR24 GND - Ground for digital and DDR2 SDRAMAR25 D1CLK0B O DDR2 Negative ClockAR26 GND - Ground for digital and DDR2 SDRAMAR27 D1DQS1 I/O DDR2 Positive Data Strobe

6-21E

BDP-S360

Pin No. Name I/O DescriptionAR28 GND - Ground for digital and DDR2 SDRAMAR29 VDD18 - 1.8V supply (DDR2 SDRAM)AR30 NFOEB O NAND Flash ROM Output EnableAR31 NWEB O NAND Flash ROM Write EnableAR32 NALE O NAND Flash ROM Address Latch EnableAR33 VOID - This pin is not ball.AR34 VOID - This pin is not ball.AR35 VOID - This pin is not ball.

7-1

BDP-S360SECTION 7

SERVICE MODEM

ain

Func

tions

- Sta

rting

Ser

vice

Mod

eTo

sta

rt Se

rvic

e M

ode,

whi

le th

e AC

pow

er is

off,

turn

on

the

AC p

ower

whi

le h

oldi

ng d

own

a sp

ecifi

c ke

y (P

LAY

key,

STO

P ke

y, and

O

PEN

/CLO

SE k

ey) o

n th

e fro

nt p

anel

of t

he u

nit.

Rel

ease

the

key

whe

n “S

ERVI

CE”

app

ears

on

the

front

dis

play

pan

el. S

tartu

p is

co

mpl

eted

whe

n th

e Se

rvic

e M

ode

scre

en is

dis

play

ed o

n th

e m

onito

r. U

se th

e re

mot

e co

ntro

l to

perfo

rm o

pera

tion.

- Vie

w E

rrorL

og/C

omm

andL

ogTh

is d

ispl

ays

the

erro

r log

or c

omm

and

log.

The

dis

play

ed in

form

atio

n ca

n al

so b

e sa

ved

to a

USB

mem

ory

devi

ce.

- Dia

g (D

iagn

ostic

s)Th

is p

erfo

rms

indi

vidu

al te

sts

on d

evic

es in

stal

led

on th

e bo

ard.

- Driv

e (D

rive-

rela

ted

diag

nost

ics

and

tool

s)Th

ese

are

tool

s fo

r per

form

ing

diag

nost

ics

on th

e BD

-Driv

e an

d w

ritin

g of

ope

ratio

n da

ta. (

For d

etai

ls o

n th

e m

enu

optio

ns, r

efer

to th

e se

para

te d

ocum

enta

tion.

)

- Fac

tory

Initi

aliz

e (F

acto

ry d

efau

lt se

tting

s)Th

is re

turn

s th

e se

t to

the

fact

ory

defa

ult s

ettin

gs.

-Net

wor

kTh

is c

heck

s th

e ne

twor

k co

nnec

tion.

1. “I

fcon

fig” i

s us

ed to

dis

play

the

netw

ork

setti

ngs

of th

e se

t uni

t.W

hen

this

is e

xecu

ted,

the

#ifc

onfig

com

man

d is

exe

cute

d, a

nd th

e co

mm

and

exec

utio

n re

sults

are

dis

play

ed.

2. “P

ing”

is u

sed

to c

heck

net

wor

k co

nnec

tivity

with

the

term

inal

spe

cifie

d by

the

IP a

ddre

ss.

Whe

n th

is is

exe

cute

d, th

e #p

ing

com

man

d is

exe

cute

d, a

nd th

e co

mm

and

exec

utio

n re

sults

are

dis

play

ed.

- Ver

sion

Up

(Ver

sion

upd

ate)

This

upd

ates

the

vers

ion

usin

g an

upd

ate

disc

. For

det

ails

on

vers

ion

upda

ting,

refe

r to

the

sepa

rate

doc

umen

tatio

n.

- Sys

tem

Info

rmat

ion

This

dis

play

s th

e sy

stem

info

rmat

ion

of th

is s

et. I

nfor

mat

ion

abou

t the

sof

twar

e ve

rsio

n an

d dr

ive

is d

ispl

ayed

.

7-2

BDP-S360

Men

u La

yout

Service Mode Menu

[1]DiagMenu

[2]DriveMenu

[3]LogMenu

[4]FactoryInitialize

[5]Network

[6]VersionUp

[7]SystemInformation

Service Mode Menu

[1]DiagMenu

[2]DriveMenu

[3]LogMenu

[4]FactoryInitialize

[5]Network

[6]VersionUp

[7]SystemInformation

Ver

sion

Up

- Upd

ate

the

vers

ion

by d

isc

Ver

sion

Up

- Upd

ate

the

vers

ion

by d

isc

Sys

tem

Info

rmat

ion

- Vie

w th

e sy

stem

info

rmat

ion

Sys

tem

Info

rmat

ion

- Vie

w th

e sy

stem

info

rmat

ion

Fac

tory

Initi

aliz

e- F

acto

ry d

efau

lt se

tting

sF

acto

ryIn

itial

ize

- Fac

tory

def

ault

setti

ngs

Log

Men

uV

iew

the

erro

r log

and

com

man

d lo

gL

ogM

enu

Vie

w th

e er

ror l

og a

nd c

omm

and

log

Erro

r Log

- Vie

w th

e er

rorl

ogE

rror L

og- V

iew

the

erro

r log

Com

man

d Lo

g- V

iew

the

com

man

d lo

gC

omm

and

Log

- Vie

w th

e co

mm

and

log

Dia

gMen

u- D

iagn

ostic

s (S

elf-d

iagn

ostic

tool

s)D

iagM

enu

- Dia

gnos

tics

(Sel

f-dia

gnos

tic to

ols)

Net

wor

k- N

etw

ork

diag

nost

ics

Net

wor

k- N

etw

ork

diag

nost

ics

Pin

g- C

heck

the

netw

ork

conn

ectiv

ityP

ing

- Che

ck th

e ne

twor

k co

nnec

tivity

Sta

tus

- Che

ck th

e ne

twor

k se

tting

sS

tatu

s- C

heck

the

netw

ork

setti

ngs

Dev

ice

Test

- Ind

ivid

ual t

ests

for b

oard

dev

ices

Dev

ice

Test

- Ind

ivid

ual t

ests

for b

oard

dev

ices

Vid

eo P

ath

Test

- Vid

eo o

utpu

t tes

tV

ideo

Pat

h Te

st- V

ideo

out

put t

est

Aud

io P

ath

Test

- Aud

io o

utpu

t tes

tA

udio

Pat

h Te

st- A

udio

out

put t

est

Driv

eMen

u- B

DP

4G d

rive-

rela

ted

diag

nost

ics

& to

ols

Driv

eMen

u- B

DP

4G d

rive-

rela

ted

diag

nost

ics

& to

ols

7-3

BDP-S360

Service Mode Menu

[1] DiagMenu

[2] DriveMenu

[3] LogMenu

[4] FactoryInitialize

[5] Network

[6] VersionUp

[7] SystemInformation

HELP : [DOWN][ENT][(NUM)]

Ser

vice

Mod

e M

enu

(Top

men

u)

Ove

rvie

w:

Top

men

u of

the

Ser

vice

Mod

eTh

e va

rious

func

tions

are

acc

esse

d fro

m th

is m

enu.

Ope

ratio

ns:

[1]

Dia

gMen

u (D

iagn

ostic

s)[2

] D

riveM

enu

(Driv

e-re

late

d di

agno

stic

s &

tool

s)

[3]

LogM

enu

(Vie

w E

rrorL

og/C

omm

andL

og)

[4]

Fact

ory

Initi

aliz

e (F

acto

ry d

efau

lt se

tting

s)[5

] N

etw

ork

[6]

Ver

sion

Up

(Ver

sion

upd

ate

by d

isc)

[7]

Sys

tem

Info

rmat

ion

(Vie

w s

yste

m in

form

atio

n)[U

P][D

OW

N]

Mov

e th

e cu

rsor

up

or d

own

[EN

T]

Ope

n th

e se

lect

ed c

urso

r ite

m

Th

e cu

rsor

is n

ot d

ispl

ayed

initi

ally

.

Dis

play

pan

el:

Whe

n a

curs

or k

ey o

r sel

ecte

d m

enu

key

is u

sed,

text

is o

utpu

t to

the

disp

lay

pane

l. In

itial

ly, “

SE

RV

ICE

” is

disp

laye

d.C

hara

cter

stri

ngs

show

n on

the

disp

lay

pane

l

Dia

gMen

u:

S-D

IAG

D

riveM

enu:

S

-DR

IVE

LogM

enu:

S

-LO

GFa

ctor

yIni

tializ

e:

S-F

INIT

Net

wor

k:

S-N

ET

Ver

sion

Up:

S

-VU

PS

yste

mIn

form

atio

n: S

-INFO

Show

s hi

nts

(suc

h as

the

curr

ently

usa

ble

keys

)

[1] DiagMenu

7-4

BDP-S360

Dia

gMen

u (D

iagn

ostic

s: D

evic

e Te

st: B

asic

Mod

el)

Ove

rvie

w:

This

men

u is

use

d to

con

duct

test

s on

dev

ices

inst

alle

d on

the

boar

d fo

r the

bas

ic

mod

el.

Scr

een

1: S

elec

ting

the

test

cat

egor

yO

pera

tions

:[L

EFT

] [R

IGH

T]

Sel

ect t

he c

ateg

ory

[DO

WN

] [E

NT]

O

pen

the

sele

cted

cat

egor

y

Scr

een

2: D

evic

e te

stA

fter D

evic

e Te

st is

sel

ecte

d in

Scr

een

1, th

e de

vice

to b

e te

sted

is s

elec

ted.

Ope

ratio

ns:

[LE

FT] [

RIG

HT]

S

elec

t the

dev

ice

to b

e te

sted

[EN

T]

Exe

cute

the

test

[UP

] R

etur

n to

the

test

cat

egor

y se

lect

ion

Mov

e th

e cu

rsor

up

[DO

WN

] M

ove

the

curs

or d

own

>Tes

t cat

egor

y lis

tD

evic

e Te

stV

ideo

Tes

tA

udio

Tes

t

>Dev

ice

Test

: Dev

ice

list

US

B

Hos

t (1

):U

SB

Med

ia C

heck

, Reg

iste

r Rea

d C

heck

D/A

Con

verte

r (2

):D

AC

writ

e ch

eck

(non

-ver

ifica

tion)

Ifcon

<-

Che

ck v

isua

lly

:IFC

ON

-rel

ated

test

1) N

o U

SB

hub

ID c

heck

in b

asic

mod

el2

) No

8[ch

] D/A

con

verte

r tes

t in

basi

c m

odel

Fo

r inf

orm

atio

n ab

out t

he d

evic

e te

sts,

refe

r to

the

diag

nost

ics

docu

men

tatio

n.

Dis

play

pan

el:

Whe

n C

ateg

ory

is s

elec

ted:

Dev

ice

Test

:D

-DE

VV

ideo

Tes

t :D

-VID

EO

Aud

io T

est

:D-A

UD

IOW

hen

Dev

ice

is s

elec

ted:

U

SB

Hos

t :D

-US

BD

/A C

onve

rter

:D-D

AC

D T

erm

inal

:D

-TE

RM

Dur

ing

US

B H

ost C

heck

: :U

SB

CH

KA

ll ite

ms

are

OK

:U

SB

OK

Som

e ite

ms

are

not O

K

:US

B N

G

Dur

ing

D/A

Con

verte

r Che

ck:

:DA

C C

HK

All

item

s ar

e O

K

:DA

C O

KS

ome

item

s ar

e no

t OK

:D

AC

NG

(Screen 1)

Diag

Category:

(Screen 2)

Diag

Category: Device Test

Device:

USB Media check ... NG

Checking...

HELP: [RIGHT][UP][ENT][RET]

USB Host

Device Test

7-5

BDP-S360

Dia

gMen

u (D

iagn

ostic

s: V

ideo

/Aud

io T

ests

)

Ove

rvie

w:

This

men

u is

use

d to

con

duct

the

vide

o te

st a

nd a

udio

test

.

Scr

een

1: W

hen

the

Vid

eo T

est c

ateg

ory

is s

elec

ted

[EN

T]

Sho

w/H

ide

colo

r bar

[UP

][RE

T]

Ret

urn

to te

st c

ateg

ory

sele

ctio

n

Scr

een

2: W

hen

the

Aud

io T

est c

ateg

ory

is s

elec

ted

[EN

T]

Pla

y/st

op a

udio

tone

[UP

][RE

T]

Ret

urn

to te

st c

ateg

ory

sele

ctio

n

>Vid

eo T

est:

Col

or b

ars

are

outp

ut to

all

outp

ut p

ins.

>Aud

io T

est

An

audi

o to

ne is

out

put t

o al

l out

put p

ins.

Dis

play

pan

el:

Dur

ing

Vid

eo T

est:

D-V

IDE

OD

urin

g A

udio

Tes

t: D

-AU

DIO

(Screen 1)

Diag

Category: Video Test

HELP: [UP][ENT][RET]

(Screen 3)

Diag

Category: Audio Test

HELP: [UP][ENT][RET]

[ENT] Show Color Bar

[ENT] Generate TONE Sound

(Scr

een

2)

[ENT]

[ENT]

7-6

BDP-S360

Driv

eMen

u (D

rive-

rela

ted

Dia

gnos

tics

& T

ools

)

Ove

rvie

w:

This

men

u is

use

d to

ope

rate

the

driv

e us

ing

driv

e-re

late

d di

agno

stic

s an

d to

ols.

Scre

en 1

: Sel

ectin

g ite

ms

Ope

ratio

ns:

[UP

] [D

OW

N]

Mov

e th

e cu

rsor

up

or d

own

[EN

T]O

pen

the

sele

cted

cur

sor i

tem

[R

ET]

Ret

urn

to th

e to

p m

enu

> Te

st it

em li

st1.

Ope

n/cl

ose

the

driv

e tra

y2.

Per

form

JT

chec

k3.

Writ

e O

P d

ata

to d

rive

4. P

erfo

rm a

ging

by

open

ing

and

clos

ing

the

driv

e tra

y5.

Per

form

dev

ice

diag

nost

ics

for d

rive

6. A

cqui

re a

nd d

ispl

ay L

D ti

me

from

driv

e7.

Che

ck

IOP

and

dis

play

the

resu

lts

Dis

play

Pan

el:

Tray

Ope

n/C

lose

: D

V-O

/CJT

Che

ck:

DV

-JT

Rew

riteO

PDat

a:

DV

-WO

PTr

ayA

ging

: D

V-A

GN

D

riveD

evic

eDia

g:

DV

-DIA

G

Driv

eLD

Tim

e:

DV-

LDTM

D

elta

IOPC

heck

: D

V-D

IOP

- Tra

yOpe

n/C

lose

(Scr

een

2)

Ope

ratio

ns:

[UP

][DO

WN

] M

ove

the

curs

or u

p or

dow

n (O

pen/

Clo

se)

[EN

T]

Exe

cute

the

sele

cted

cur

sor i

tem

[R

ET]

Ret

urn

to th

e dr

ive

men

u

- Driv

eDev

iceD

iag

(Scr

een

3)

Ope

ratio

ns:

[EN

T]E

xecu

te D

riveD

evic

eDia

g [R

ET]

Ret

urn

to th

e dr

ive

men

u

- Driv

eLD

Tim

e (S

cree

n 4)

Ope

ratio

ns:

[EN

T]D

ispl

ay th

e LD

tim

e of

the

driv

e [R

ET]

Ret

urn

to th

e dr

ive

men

u

- Del

taIO

PChe

ck (S

cree

n 5)

O

pera

tions

:[E

NT]

Dis

play

the

IOP

of t

he d

rive

[RE

T]R

etur

n to

the

driv

e m

enu

If

IOP

mea

sure

men

t is

exec

uted

, ver

sion

upd

ate

by C

D is

no

long

er p

ossi

ble

in S

ervi

ce M

ode.

(Screen 1)

Diag

[1] TrayOpen/Close

[2] JTCheck

[3] RewriteOPData

[4] TrayAging

[5] DriveDeviceDiag

[6] DriveLDTime

[7] DeltaIOPCheck

Info

rmat

ion

is d

ispl

ayed

her

e w

hen

one

of th

e m

enu

optio

ns

belo

w is

sel

ecte

d (

See

bel

ow.)

[1] TrayOpen/Close

[5] DriveDeviceDiag

[6] DriveLDTime

[7] DeltaIOPCheck

TrayCtrl

Open

Close

Processing…

DriveDeviceDiag

Remove DISC and close tray.

[ENT] Start Device Diag

OK - DeviceDiag

DriveLDTime

[ENT] Show LDTime

BD :[ 1:25]

DVD:[ 0:00]

CD :[ 0:00]

DeltaIOPCheck

[ENT] Start

BD :[ 0]

DVD:[ 2]

CD :[ 2]

TEMP:[ 0]

(Scr

een

2)Tr

ayO

pen/

Clo

se(S

cree

n 3)

Driv

eDev

iceD

iag

(Scr

een

4) D

riveL

DTi

me

(Scr

een

5) D

elta

IOPC

heck

7-7

BDP-S360

Driv

eMen

u (D

rive-

rela

ted

Dia

gnos

tics

& T

ools

- C

ontin

ued)

- JT

Che

ck (S

cree

n 6)

O

pera

tions

:[U

P][D

OW

N]

Mov

e th

e cu

rsor

up

or d

own(

Tray

Ope

n/Tr

ayC

lose

/PS

N/S

TAR

T)[E

NT]

S

elec

t and

exe

cute

the

sele

cted

cur

sor i

tem

[R

ET]

R

etur

n to

driv

e m

enu

PS

N in

put(P

SN

):O

pera

tions

:[(N

UM

)]N

umbe

r inp

ut[C

LEA

R]

Bac

kspa

ce

[RE

T][E

NT]

R

etur

n

- Tra

yAgi

ng (S

cree

n 7)

O

pera

tions

:[U

P][D

OW

N]

Mov

e th

e cu

rsor

up

or d

own

(Tim

es/S

TAR

T)[E

NT]

S

elec

t and

exe

cute

the

sele

cted

cur

sor i

tem

[R

ET]

R

etur

n to

driv

e m

enu

Driv

e tra

y op

en/c

lose

cou

nt in

put (

Tim

es):

Ope

ratio

ns:

[(NU

M)]

Num

ber o

f tim

es d

rive

tray

is o

pene

d an

d cl

osed

[CLE

AR

] B

acks

pace

[R

ET]

[EN

T]

Ret

urn

- ReW

riteO

PD

ata

(Scr

een

8)O

pera

tions

:[E

NT]

R

ead,

regi

ster

, and

writ

e dr

ive

oper

atio

n da

ta

Bef

ore

exec

utin

g th

e ab

ove

oper

atio

n, a

US

B m

emor

y de

vice

with

OP

dat

a m

ust b

e in

serte

d [R

ET]

R

etur

n to

driv

e m

enu

D

rive

oper

atio

n da

taTh

e op

erat

ion

data

is re

ad fr

om th

e U

SB

mem

ory

devi

ce. T

he d

evic

e th

at is

re

ad(lo

aded

dev

ice)

is lo

cate

d in

/dev

/sda

1. (I

n th

e S

etup

/ES

mod

el, t

he s

tora

ge

devi

ce lo

aded

in o

ne o

f the

two

US

B p

orts

that

is re

cogn

ized

firs

t is

desi

gnat

ed a

s /d

ev/s

da1.

) Th

e da

ta in

BuD

ata.

txt i

n th

e U

SB

mem

ory

devi

ce (r

oute

) is

read

.

For

det

ails

on

the

abov

e dr

ive

tool

s, re

fer t

o th

e se

para

te d

ocum

enta

tion.

(Screen 6)

DriveJTCheck

TrayOpen

TrayClose

PSN:

[START]

(Screen 7)

DriveTrayAging

Times : [START]

Tray Open/Close: 0

(Screen 8)

DriveReWriteOPData

Insert USB StorageDevice ...

Remove DISC and Close tray.

[ENT] Start

Err: Can’t read from USBMem!(-1)

HELP: [ENT][RET]

Exa

mpl

e of

scr

een

whe

n U

SB

mem

ory

devi

ce is

not

inse

rted

7-8

BDP-S360

(Screen 1)

Select Log

[2] Command Log

HELP : [DOWN][ENT][(NUM)]

Log:

Com

man

d Lo

g / E

rror L

og (D

ispl

ay o

f Log

s)

Ove

rvie

w:

This

is u

sed

to d

ispl

ay th

e lo

g in

form

atio

n.

Scre

en 1

: Sel

ectin

g th

e lo

g ty

pe th

at is

dis

play

edO

pera

tions

:[1

]O

pen

the

Err

or L

og o

utpu

t scr

een

[2]

Ope

n th

e C

omm

and

Log

outp

ut s

cree

n[U

P][D

OW

N]

Mov

e th

e cu

rsor

up

or d

own

[EN

T]O

pen

the

sele

cted

cur

sor i

tem

[RE

T]R

etur

n to

Ser

vice

Mod

e to

p m

enu

Scre

en 2

: Dis

play

of E

rror

Log

Ope

ratio

ns:

[LE

FT]

Pre

viou

s pa

ge[R

IGH

T]N

ext p

age

[RE

T]R

etur

n to

scr

een

for s

elec

ting

log

type

(Scr

een

1)[R

ED]

Sav

e th

e er

ror l

og d

ata

to th

e U

SB m

emor

y de

vice

Scre

en 3

: Dis

play

of C

omm

and

Log

Ope

ratio

ns:

[LE

FT]

Pre

viou

s pa

ge[R

IGH

T]N

ext p

age

[RE

T]R

etur

n to

scr

een

for s

elec

ting

log

type

(Scr

een

1)[R

ED]

Sav

e th

e co

mm

and

log

data

to th

e U

SB m

emor

y de

vice

Dis

play

pan

el:

Whe

n lo

g ty

pe is

sel

ecte

d E

rror

log:

S-E

LOG

Com

man

d lo

g: S

-CLO

GW

hen

log

is d

ispl

ayed

P

age

indi

cato

rex

) 1/5

0

>Rea

ding

the

log

disp

lay

Err

or lo

g: 00

1 08

/01/

01 0

0:53

:19:

[Err

Cod

e:08

0400

0000

00]

[Num

ber (

from

old

est l

og)]

[Dat

e] [T

ime]

[Err

or c

ode]

Com

man

d lo

g:00

01 0

8/01

/01

00:5

3:19

: 0

PO

WE

R

0

[No.

(fro

m o

ldes

t log

)] [D

ate]

[Tim

e] [C

ount

] [C

omm

and

nam

e] [E

dge

0:on

1:o

ff]

Cop

ying

logs

to a

US

B m

emor

y de

vice

Lo

ad th

e U

SB m

emor

y de

vice

into

the

set w

hile

the

log

scre

en is

dis

play

ed, a

nd p

ress

the

[RED

] bu

tton.

Err

or lo

g:

If th

e ge

tErr

LogF

ile.tr

m fi

le is

foun

d in

the

USB

mem

ory

devi

ce,

the

errlo

g.lo

g fil

e is

out

put.

Com

man

d lo

g:

If th

e ge

tCm

dLog

File

.trm

file

is fo

und

in th

e U

SB m

emor

y de

vice

, th

e cm

dlog

.log

file

is o

utpu

t.

This

func

tion

cann

ot b

e us

ed if

USB

Hos

t tes

t is

bein

g co

nduc

ted

in th

e D

iag

men

u.

Sev

eral

sec

onds

are

requ

ired

for s

avin

g th

e da

ta, a

nd s

o be

sur

e to

wai

t lon

g en

ough

bef

ore

rem

ovin

g th

e U

SB m

emor

y de

vice

.

(Screen 2)

Error Log

001 08/01/01 00:53:19: [ErrCode:080400000000]

002 08/01/01 00:53:45: [ErrCode:080400252100]

003 08/01/01 00:54:00: [ErrCode:080400005555]

: :

[1] Error Log

(Screen 3)

Command Log

0001 08/01/01 00:53:19: 0 POWER 0

0002 08/01/01 00:53:45: 1 POWER

1

0003 08/01/01 00:54:00: 79 OPEN_CLOSE 0

: :

< Page 1/50 >

7-9

BDP-S360

(Screen 1)

Factory Initialize

[ENT] Start Initialize

[RET] Return to Top Menu

Fact

ory

Initi

aliz

e (F

acto

ry D

efau

lt S

ettin

gs)

Ove

rvie

w:

This

is u

sed

to re

turn

the

set t

o th

e fa

ctor

y de

faul

t set

tings

.Th

is re

turn

s al

l mod

ified

set

tings

to th

e fa

ctor

y de

faul

t set

tings

.H

owev

er, t

he in

itial

izat

ion

proc

ess

is n

ot c

ompl

ete

by o

nly

perfo

rmin

g th

is o

pera

tion.

A

fter t

his

oper

atio

n, th

e se

t mus

t be

rebo

oted

to c

ompl

ete

the

initi

aliz

atio

n pr

oces

s.A

nor

mal

rest

art i

s us

ed to

rebo

ot. I

nitia

lizat

ion

is n

ot c

ompl

eted

by

rest

artin

g in

S

ervi

ce M

ode

or o

ther

spe

cial

mod

e.

Ope

ratio

ns:

Scr

een

1To

retu

rn th

e se

t to

the

fact

ory

defa

ult s

ettin

gs, p

ress

[EN

T] in

this

scr

een.

All

save

d tit

les

are

eras

ed.

[EN

T]

Initi

aliz

e th

e se

t to

the

fact

ory

defa

ult s

tate

[RE

T]

Ret

urn

to S

ervi

ce M

ode

top

men

u

Scr

een

2Th

is is

the

scre

en d

ispl

ayed

afte

r ini

tializ

atio

n is

exe

cute

d.In

itial

izat

ion

is c

ompl

eted

by

rebo

otin

g th

e se

t.Tu

rn th

e A

C p

ower

sup

ply

off a

nd th

en o

n ag

ain.

You

can

cont

inue

to p

erfo

rm o

ther

Ser

vice

Men

u op

erat

ions

bef

ore

rebo

otin

g.

Dis

play

pan

el:

Dur

ing

initi

aliz

atio

n:

SE

TTIN

GW

hen

initi

aliz

atio

n w

as s

ucce

ssfu

l: IN

IT-O

K (S

cree

n 2)

Whe

n in

itial

izat

ion

faile

d:

INIT

-NG

(Screen 2)

Factory Initialize

Reboot to complete.


HELP : [RET]

7-10

BDP-S360

(Screen 1)

Network

Test: Ping

Net

wor

k (N

etw

ork

Test

Dia

gnos

tics

Scr

een:

Ifco

nfig

)

Ove

rvie

w:

This

is th

e ne

twor

k m

enu.

The

vario

us n

etw

ork

diag

nost

ic fu

nctio

ns a

re a

cces

sed

from

this

men

u.

Scr

een

1: If

conf

ig te

stO

pera

tions

:[E

NT]

E

xecu

te th

e Ifc

onfig

com

man

d (D

ispl

ay n

etw

ork

setti

ngs)

[RIG

HT]

O

pen

the

Pin

g te

st[R

TN]

Ret

urn

to S

ervi

ce M

ode

top

men

u

Scr

een

2: P

ing

test

Ope

ratio

ns:

[LE

FT]

Ope

n th

e Ifc

onfig

test

[RTN

] R

etur

n to

Ser

vice

Mod

e to

p m

enu

For

det

ails

on

the

Pin

g te

st, r

efer

to th

e ne

xt p

age.

Scr

een

3: D

urin

g ex

ecut

ion

of If

conf

ig te

stTh

e Ifc

onfig

com

man

d ou

tput

resu

lts a

re d

ispl

ayed

.O

pera

tions

:[E

NT]

E

xecu

te a

gain

[RIG

HT]

O

pen

the

Pin

g te

st[R

TN]

Ret

urn

to S

ervi

ce M

ode

top

men

u

Dis

play

pan

el:

S-N

ET

(Screen 2)

Network

Test: Ifconfig

Ping To : [START]

Ping To :

Ping

Ifconfig

(Screen 3)

Network

Test: Ping

Link encap:Ethernet HWaddr 00:16:01:85:21:A3

inet addr:43.17.110.225 Bcast:43.17.110.255 Mask:255.255.255.0

inet6 addr: fe80::216:1ff:fe85:21a3/64 Scope:Link

UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1

RX packets:533280 errors:0 dropped:0 overruns:0 frame:0

TX packets:219639 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:1000

RX bytes:44569483 (42.5 MiB) TX bytes:46206300 (44.0 MiB)

Interrupt:217 Base address:0x9c00

HELP: [ENT]:Re/Exe [RIGHT]

Ifconfig

The

act

ual s

cree

ns m

ay d

iffer

slig

htly

from

the

scre

en c

onte

nt s

how

n he

re.

7-11

BDP-S360

Net

wor

k (N

etw

ork

Test

Dia

gnos

tics

Scr

een:

Pin

g)

Ove

rvie

w:

Pin

g te

st

Scr

een

1: P

ing

test

Ope

ratio

ns:

[UP

] S

et th

e IP

add

ress

of t

he p

ing

loca

tion

[DO

WN

] P

repa

re to

exe

cute

test

[RTN

] R

etur

n to

Ser

vice

Mod

e to

p m

enu

For

det

ails

on

the

Pin

g te

st, r

efer

to th

e ne

xt p

age.

Scr

een

2: S

peci

fy th

e IP

add

ress

of t

he p

ing

loca

tion

(IP in

put m

ode)

Whe

n “P

ing

To:”

is h

ighl

ight

ed, p

ress

[EN

T] to

ent

er th

e IP

add

ress

.O

pera

tions

:[E

NT]

E

xit i

nput

[RTN

]E

xit i

nput

[LE

FT]

Exi

t inp

ut, a

nd o

pen

the

Ifcon

fig te

st[(N

UM

)]E

nter

num

bers

from

0 to

9[T

IME

] E

nter

the

char

acte

r “.”

[CLE

AR

] B

acks

pace

Scr

een

3: D

urin

g ex

ecut

ion

of P

ing

test

Whe

n “S

TAR

T” is

hig

hlig

hted

, pre

ssin

g [E

NT]

exe

cute

s th

e P

ing

test

.O

pera

tions

: [E

NT]

E

xecu

te P

ing

test

[UP

] S

et th

e IP

add

ress

of p

ing

loca

tion

[DO

WN

] P

repa

re to

exe

cute

test

[RTN

] R

etur

n to

Ser

vice

Mod

e to

p m

enu

Dis

play

pan

el:

S-N

ET

(Screen 1)

Network

Test: Ifconfig

Ping To : [START]

Ping To :

Ping

(Screen 2)

Network

Test: Ifconfig

[ENT] : Release

[RET] : Release

[LEFT] : Ifconfig Test

[(NUM)]: ‘0-9’

[TIME] : ‘.’

[CLEAR]: Backspace

Ping To :> 172.16.200.13

Ping

(Screen 3)

Network

Test: Ifconfig

Ping To : 172.16.200.13

PING 172.16.200.13 (172.16.200.13) 56(84) bytes of data.

64 bytes from 172.16.200.13: icmp_seq=0 ttl=64 time=0.022 ms

--- 172.16.200.13 ping statistics ---

1 packets transmitted, 1 received, 0% packet loss, time 0ms

rtt min/avg/max/mdev = 0.022/0.022/0.022/0.000 ms, pipe 2

[HELP]: [ENT]:Start [UP][LEFT]

Ping

The

act

ual s

cree

ns m

ay d

iffer

slig

htly

from

the

scre

en c

onte

nt s

how

n he

re.

[START]

7-12

BDP-S360

(Screen 1)

Version Updater

[ENT] Start Update


HELP : [ENT][RET]

Ver

sion

Up

(Ver

sion

Upd

ate

by d

isc)

Ove

rvie

w:

This

is u

sed

to u

pdat

e th

e ve

rsio

n us

ing

an u

pdat

e di

sc.

Th

is m

enu

is n

ot a

vaila

ble

afte

r IO

P m

easu

rem

ent i

s ex

ecut

ed.

Scr

een

1: S

cree

n af

ter e

nter

ing

Ver

sion

Upd

ater

men

uO

pera

tions

:[E

NT]

S

tart

upda

te b

y di

sc

(Tra

y op

ens,

and

Scr

een

2 is

ope

ned)

[RE

T]

Ret

urn

to S

ervi

ce M

ode

top

men

u

Scr

een

2: In

sert

the

vers

ion

upda

te d

isc

Ope

ratio

ns:

[EN

T]

Clo

se tr

ay a

nd p

erfo

rm d

isc

chec

k[R

ET]

C

ance

l(T

ray

clos

es, a

nd s

cree

n re

turn

s to

Scr

een

1)

Scr

een

3: D

urin

g di

sc c

heck

O

KO

pera

tions

:Th

e se

t is

rebo

oted

aut

omat

ical

ly.

Scr

een

4: D

urin

g ch

eck

NG

Ope

ratio

ns:

[Err

or] ·

·· (E

rror m

essa

ge) i

s ou

tput

, and

the

scre

en re

turn

s to

scre

en 2

.

Dis

play

pan

el:

Dur

ing

disc

load

ing

V-IN

SC

DW

hen

load

ing

of d

isc

fails

V

-NO

DS

CW

hen

chec

k fa

ils

V-C

HK

NG

Whe

n ch

eck

is s

ucce

ssfu

l V

-CH

KO

KD

urin

g re

boot

R

EB

OO

T

(Screen 2)

Version Updater

Insert update DISC ...

[ENT] Tray Close and Check start

[RET] Cancel

HELP: [ENT][RET]

(Screen 3)

Version Updater

Now, mounting and checking... OK

(Screen 4)

Version Updater

Now, mounting and checking...

[Error] Can’t use DISC!

HELP: [ENT][RET]

7-13E

BDP-S360

(Vie

win

g th

e S

yste

m In

form

atio

n)

Ove

rvie

w:

This

is u

sed

to v

iew

the

syst

em in

form

atio

n.

Ope

ratio

ns:

[RE

T]

Ret

urn

to S

ervi

ce M

ode

top

men

u

If

the

IOP

mea

sure

men

t is

perfo

rmed

, the

Ver

sion

UP

func

tion

in th

e S

ervi

ce

Mod

e M

enu

is n

o lo

nger

ava

ilabl

e.

Dis

play

ed in

form

atio

n:M

odel

nam

e M

odel

Des

tinat

ion

Des

tIP

add

ress

IP

Mac

add

ress

M

acC

PU

ver

sion

C

PU

<-

[Firm

Ver

sion

] [G

ener

atio

nVer

sion

]N

BL

vers

ion

NB

LK

erne

l ver

sion

K

erne

lH

ost v

ersi

on

Hos

t <

- [H

ostV

ersi

on] [

Rel

ease

Ver

sion

]O

ptic

al d

isc

driv

e D

rive

<- [

Mod

el] [

Firm

Rev

isio

n] [S

eria

lNum

ber]

Driv

e us

age

time

LDTi

me

[M

edia

]: [L

DTi

me]

IF

Con

ver

sion

IF

Con

<-

B0:

[Blo

ck0

vers

ion]

B1:

[Blo

ck1

vers

ion]

IFC

on fi

rmw

are

date

F

irmD

ate

Tem

pera

ture

of s

et

Tem

p <

- [C

]

Dis

play

pan

el:

Vie

win

g th

e H

ost v

ersi

on0

1.0.

002

Dis

play

ed a

s 01

0 00

2

System Information

Model : BDP4G-BP

Dest : JP

IP : 172.16.102.32

Mac : 00:1a:80:d0:47:65

CPU : E0.029.0[F020]

NBL : BDP4G 3.2.0

Kernel: BDP4G-3.2.0

Host : 01.0.002

20090121D00

Drive : BDP300 1.00 B30000000383_20

LDTime: BD : [ 0:00]

DVD: [ 0:11]

CD : [ 0:50]

IFcon : B0: 0x24 B1: 0x05

FirmDate: 02/12 17:10

Temp : 42 [degC]

[RET]: TopMenu

8-1E

BDP-S360SECTION 8

ERROR LOG LIST

Category err_code

CSI communication timeoutMainly ITcon communication error 0x01 csi_id Replace the chip corresponding to the ID, or replace the EMMA3P chip.

Cases where problem occursDevice for sending only (ex. DAC 2ch/8ch, ES DAC 2ch/8ch device)Recorded to log during a timeout of the sending complete interruptDevice for sending and receiving (ex. IFcon device)Recorded to log during a timeout of the receiving complete interruptOther VIDEO_GLUE and HDE specifications are unknown at this time.ID list (Driver/Common/CSI/if/csi_id_bdp3g_ryoushi.h) CSI_ID_DAC_2CH = 0, / Audio DAC AK4385A 2ch Write only / CSI_ID_DAC_8CH = 1, / Audio DAC AK4358 8ch Write only / CSI_ID_DAC_2CH_ES = 2, / Audio DAC PCM1796 2ch Write only for ES / CSI_ID_DAC_8CH_ES = 3, / Audio DACs PCM1791A 2ch4 Write only for ES / CSI_ID_VIDEO_GLUE = 4, / VIDEO Glue for ES / CSI_ID_HDE1 = 5, / HD Enhancer1 for ES / CSI_ID_HDE2 = 6, / HD Enhancer2 for ES / CSI_ID_CC_UCOM = 7, / Spare micro-controller for CC / CSI_ID_ITCON = 8, / ITcon /

I2C communication timeout 0x02 i2c_id Replace the chip corresponding to the ID, or replace the EMMA3P chip.

Cases where problem occursRecorded to log during a timeout at sending interrupt standbyID list (Driver/Common/I2C/if/i2c_id_bdp3g_ryoushi.h) I2C_ID_HDMI_A = 0, / External HDMI (sub-addrA) SiI9134 / I2C_ID_HDMI_B = 1, / External HDMI (sub-addrB) SiI9134 / I2C_ID_SCALER = 2, / 1080p SCALER / I2C_ID_HDMI_INTERNAL_A = 3, / EMMA3P Internal HDMI I2C-A / I2C_ID_HDMI_INTERNAL_B = 4, / EMMA3P Internal HDMI I2C-B /

Device ID error for HDMI device 0x03 VendorId DeviceId EMMA fault/External HDMI device fault (for ES)

Read error 0x00 Check for scratches and dust on the disc. Stream or NaviPack read error. Read error for information is not handled.Wrong region 0x01 Unable to play because of wrong regionDecode error 0x02 Problem with stream This is output by detection of EMMA, and so output may continue for some time.AACS verify error 0x03 Disc may be invalid. When an error has occurred in ReqAacsPmVerifyUsageHashWrong TV system (DVD-Video) 0x04 Disc is invalid. If the TV_system is mixed in the DVD-Video disc, playback stops when mixing is found.

Drive communication error 0x00 opcode Perform key operation again. Replace if the error occurs again. EMMA error. Perform a system reboot if this occurs.Drive mechanical error 0x01 opcode Service repair Perform a system reboot if this occurs.Tray open/close error 0x02 - - - - Perform key operation again. Replace if the error occurs again. LU error: (Disc loading errorCommand timeout 0x03 Perform key operation again. Replace if the error occurs again. Immediate timeout type. Perform a system reboot if this occurs.

Shutdown due to overheating of set FAN ERR 0x01Temperature data

(8bit)Check the operating temperature environment of the set.

Cases where problem occursIf the temperature rise results in a thermal shutdown, this is recorded in the log. No information is available yet in the conversion table between temperature data (8bit) A/D value andtemperature data.

FAN breakdown FAN ERR 0x02 Replace the fan. Cases where problem occursWhen FANDET is used, a fan breakdown diagnosis by FANDET is recorded in the log.

NAND Error E7001 0x01After rebooting, if the error occurs again, or a malfunction occurs, repair by the Service Center is needed.Replace NAND if a forced formatting of the NVRAM does not fix the problem. The settings and all other data inthe NVRAM are reset.




NAND Error E7005 0x05Reboot and perform automatic repair. If the error occurs again, repair by the Service Center is needed.Replace NAND if a forced formatting of the NVRAM does not fix the problem. The settings and all other data inthe NVRAM are reset.





NAND Error E7010 0x0AReboot and perform automatic repair. If the error occurs again, repair by the Service Center is needed.Replace NAND if a forced formatting of the NVRAM does not fix the problem. The settings and all other data inthe NVRAM are reset.

NAND Error E7011 0x0BReboot and perform automatic repair. If the error occurs again, repair by the Service Center is needed.Replace NAND if a forced formatting of the NVRAM does not fix the problem. The settings and all other data inthe NVRAM are reset.

NAND (SdmRegistry) error E7101 0x65 If the error still appears after rebooting, repair by the Service Center is needed. (NAND lifespan replacement NAND (SdmRegistry) error E7102 0x66 If the error still appears after rebooting, repair by the Service Center is needed. (NAND lifespan replacement NAND (SdmRegistry) error E7103 0x67 If the error still appears after rebooting, repair by the Service Center is needed. (NAND lifespan replacement NAND (SdmRegistry) error E7104 0x68 If the error still appears after rebooting, repair by the Service Center is needed. (NAND lifespan replacement NAND (SdmRegistry) error E7105 0x69 If the error still appears after rebooting, repair by the Service Center is needed. (NAND lifespan replacement

Video filesystem mount error 0x01 Load a different disc.Photo filesystem mount error 0x02 Load a different disc.Video database mount error 0x03 Load a different disc.Photo database mount error 0x04 Load a different disc.USB mount error 0x05 Insert a USB memory device.Video unplayable 0x11 Load a different disc.Video unplayable (invalid region) 0x12 Check the product region, and load a different disc.Video unplayable (invalid tv system) 0x13 Check the product region, and load a different disc.Video unplayable (pin lock) 0x14Video unplayable (parental lock) 0x15Virtual package authentication error 0x21 Delete the BD data.Invalid disc 0x31 Load a different disc.Disc read error 0x32 Load a different disc.Buda read error 0x41 Insert a USB memory device.Buda write error 0x42 Insert a USB memory device.Ada read error 0x51 Load a different disc, and initialize the settings. There may be something wrong with the BD-J read/write, and the NAND may be corrupted.Ada write error 0x52 Load a different disc, and initialize the settings. There may be something wrong with the BD-J read/write, and the NAND may be corrupted.

ercdsense_key

cdb

Response by Service Center Additional NotesMajor ClassificationClassification Number Cause/Error Description err_info (4-byte length)

Error Information Displayed in Error LogMessage onDisplay Panel

Playback relatedERRLOG_CATEGORY_PB

DB relatedERRLOG_CATEGORY_DB

System relatedERRLOG_CATEGORY_SYSTEM

Disc, Drive, or Tray relatedERRLOG_CATEGORY_DISC

Heating relatedERRLOG_CATEGORY_THERMO

NVRAM relatedERRLOG_CATEGORY_NVRAM

0x08

0x00

0x02

0x04

0x05

0x07

9-1

BDP-S360SECTION 9

TROUBLESHOOTINGM

ain

Flow

char

t

No

No

Yes

Yes

No

Yes

No

Yes

No

Yes

No

No

No

Yes

Yes

Yes

No

Yes

Yes

No

Yes

No

No

Yes

Yes

No

Yes

Pow

er O

N b

y po

wer

sw

itch

on fr

ont o

r rem

ote

cont

rol.

Has

sys

tem

rese

t (E

MM

A_X

RS

T) b

een

canc

elle

d?

Mea

sure

men

t poi

nt J

L961

To V

ideo

sec

tion

flow

char

t

To IF

con

sect

ion

flow

char

t

Sta

rt (a

nd re

turn

from

eac

h flo

wch

art)

App

roxi

mat

ely

10 s

econ

ds a

fter t

he A

C is

appl

ied,

the

WA

IT d

ispl

ay fl

ashe

s se

vera

ltim

es a

nd th

e po

wer

is tu

rned

OFF

auto

mat

ical

ly.

Are

the

pow

er s

uppl

y vo

ltage

s on

the

MB

boar

d no

rmal

?To

Pow

er S

uppl

y (S

yste

m) f

low

char

t.

EN

D

Rep

lace

the

MB

boa

rd.

To D

rive

flow

char

tB

U A

djus

tmen

t Flo

w [y

y] ~

Afte

r BU

/MB

Rep

lace

men

t ~

To D

rive

flow

char

t

To F

L/FR

boa

rd fl

owch

art

Che

ck th

e pa

rts a

nd m

ount

ing

arou

nd X

401.

Rep

lace

the

MB

boa

rd.

To D

rive

flow

char

tB

U A

djus

tmen

t Flo

w [y

y] ~

Afte

r BU

/MB

Rep

lace

men

t ~

Is O

PE

N o

r CLO

SE

dis

play

ed o

n th

eflu

ores

cent

tube

?

Is th

ere

any

prob

lem

in th

e FF

C c

onne

ctio

n to

CN

4261

whi

ch c

onne

cts

the

driv

es?

To F

L/FR

boa

rd fl

owch

art

Is X

MB

or t

he S

ETU

P s

cree

n di

spla

yed

on th

evi

deo

outp

ut s

cree

n?

Do

the

up,

dow

n, le

ft, a

nd ri

ght a

rrow

key

s of

the

rem

ote

cont

rol p

erm

it op

erat

ions

on

the

XM

B?

Is th

e m

ain

cloc

k (X

401)

osc

illat

ing

prop

erly

at

27 M

Hz?

Che

ck th

e fle

xibl

e ca

ble

of th

e dr

ive.

Are

CN

1301

, CN

4201

, or C

N42

61di

scon

nect

ed?

Che

ck th

e co

nnec

tions

of t

he c

onne

ctor

s.If

ther

e is

no

impr

ovem

ent,

repl

ace

the

MB

boar

d.To

Driv

e flo

wch

art

BU

Adj

ustm

ent F

low

[yy]

~ A

fter B

U/M

BR

epla

cem

ent ~

SY

S E

RR

dis

play

app

ears

on

fluor

esce

nt tu

be.

To D

rive

flow

char

t

Is th

e so

und

repr

oduc

ed p

rope

rly w

hen

a B

D,

DV

D, o

r oth

er d

isc

is p

laye

d?To

Aud

io s

ectio

n flo

wch

art

Is th

e pi

ctur

e re

prod

uced

pro

perly

whe

n a

BD

,D

VD

, or o

ther

dis

c is

pla

yed?

To V

ideo

sec

tion

flow

char

t

Are

BD

, DV

D, o

r oth

er d

iscs

that

are

load

ed o

nth

e dr

ive

reco

gniz

ed c

orre

ctly

?

9-2

BDP-S360

Pow

er S

uppl

y (S

yste

m) f

low

char

t

AC

IN

Che

ck th

e ou

tput

vol

tage

s fro

m th

e po

wer

supp

ly b

lock

.A

re th

e fo

llow

ing

volta

ges

OK

?N

o

CN

301

pin

3, 4

:+12

V (U

NS

W12

V)

CN

301

pin

7, 8

, 9: +

5.8V

(UN

SW

6V)

CN

801

pin

1: +

12V

(UN

SW

12V

A)

CN

801

pin

3: +

6V (U

NS

W6V

A)

CN

801

pin

5: -9

V (U

NS

W-9

VA

)

Yes

Che

ck o

f fus

esH

ave

any

of th

e fo

llow

ing

fuse

s bl

own?

No

Rep

lace

blo

wn

fuse

s.R

epla

ce th

e M

B b

oard

if th

ere

is n

oim

prov

emen

t.

MB

boa

rd: P

S30

1, P

S30

3, P

S30

4, P

S80

2,P

S80

3, P

S80

4FR

boa

rd: P

S70

1

Yes

Che

ck th

e fo

llow

ing

pow

er c

ontro

l sig

nals

whi

le th

e po

wer

is O

N.

Are

they

H le

vel (

3.3

V)?

No

To IF

con

sect

ion

flow

char

t

PC

ON

T1: M

B b

oard

R30

4P

CO

NT2

: MB

boa

rd R

309

PC

ON

T3: M

B b

oard

R37

6P

CO

NT3

: MB

boa

rd R

367

ATA

_PC

ON

T: M

B b

oard

CN

301

pin

11A

TA_P

CO

NT2

: MB

boa

rd C

1285

(+ s

ide)

Yes

Che

ck th

e vo

ltage

s ba

sed

on th

e sc

hem

atic

diag

ram

.A

re th

ey o

utpu

t cor

rect

ly?

No

Vol

tage

line

s th

at a

re n

ot o

utpu

t are

sho

rted

to G

ND

.N

o

Failu

re o

f pow

er s

uppl

y IC

-->

Rep

lace

the

IC. R

epla

ce th

e M

B b

oard

if th

ere

is n

oim

prov

emen

t.To

Driv

e flo

wch

art

BU

Adj

ustm

ent F

low

[yy]

~ A

fter B

U/M

BR

epla

cem

ent ~

Yes

Yes

Pow

er s

uppl

y is

OK

Rep

lace

the

MB

boa

rd w

hen

the

parts

on

that

vol

tage

line

can

not b

e id

entif

ied

assh

orte

d.To

Driv

e flo

wch

art

BU

Adj

ustm

ent F

low

[yy]

~ A

fter B

U/M

BR

epla

cem

ent ~

Che

ck th

at th

e ha

rnes

s ha

s be

en in

serte

dpr

oper

ly. I

f the

re is

no

prob

lem

, rep

lace

the

pow

er s

uppl

y bl

ock.

To D

rive

flow

char

tB

U A

djus

tmen

t Flo

w [y

y] ~

Afte

r BU

/MB

Rep

lace

men

t ~

9-3

BDP-S360

Aud

io s

ectio

n flo

wch

art

Aud

io d

oes

not s

ound

righ

t

Aud

io is

out

put p

rope

rly.

No

Vid

eo is

out

put p

rope

rly.

Yes

To V

ideo

sec

tion

flow

char

t

Yes

Is th

e flu

ores

cent

tube

/LE

D d

ispl

ay c

orre

ct?

No

To M

ain

flow

char

t

Yes

Is th

e dr

ive

oper

atin

g pr

oper

ly?

No

To D

rive

flow

char

t

Yes

Is e

ach

pow

er s

uppl

y su

pplie

d to

the

AU

DIO

Blo

ck?

No

To P

ower

Sup

ply

(Sys

tem

) flo

wch

art

CN

801

pin

1: +

12V

CN

801

pin

3: +

6VC

N80

1 pi

n 5:

-9V

CN

203

pin

21: +

5V

Yes

Che

ck th

e in

put o

f eac

h po

wer

sup

ply.

No

Rep

lace

IC li

nk

Q80

7 (E

mitt

er):

-8V

Q80

8 (E

mitt

er):

+12V

IC80

9 pi

n 5:

+6V

Whe

n Q

807

is d

efec

tive:

Rep

lace

PS

804

Whe

n Q

808

is d

efec

tive:

Rep

lace

PS

802

Whe

n IC

809

is d

efec

tive:

Rep

lace

PS

803

Yes

Che

ck th

e ou

tput

of e

ach

pow

er s

uppl

y.N

oW

hen

IC80

4 is

def

ectiv

e, c

heck

the

outp

ut o

fIC

304.

No

To P

ower

Sup

ply

(Sys

tem

) flo

wch

art

Yes

Is a

n au

dio

syst

em d

igita

l sig

nal i

nput

toIC

804?

No

IC80

4 pi

n 1:

MC

LKIC

804

pin

2: B

CLK

IC80

4 pi

n 3:

DA

TAIC

804

pin

4: L

RC

K

Yes

Are

con

trol s

igna

ls in

put t

o IC

804?

No

IC80

4 pi

n 6:

CS

NIC

804

pin

7: C

CLK

IC80

4 pi

n 8:

CD

TIC

N80

4 pi

n 1:

XA

MU

TEC

N80

4 pi

n 9:

Res

et

Yes

Is a

dig

ital o

utpu

t (H

DM

I/Coa

x/O

pt) s

igna

lou

tput

from

eac

h of

the

Aud

io o

utpu

tco

nnec

tors

?

No

If fa

ulty

, rep

lace

the

MB

boa

rd.

To D

rive

flow

char

tB

U A

djus

tmen

t Flo

w [y

y] ~

Afte

r BU

/MB

Rep

lace

men

t ~

If fa

ulty

, rep

lace

the

MB

boa

rd.

To D

rive

flow

char

tB

U A

djus

tmen

t Flo

w [y

y] ~

Afte

r BU

/MB

Rep

lace

men

t ~

If fa

ulty

, rep

lace

the

MB

boa

rd.

To D

rive

flow

char

tB

U A

djus

tmen

t Flo

w [y

y] ~

Afte

r BU

/MB

Rep

lace

men

t ~

IC30

4 pi

n 4:

+5V

Q80

7 (C

olle

ctor

): -8

VQ

808

(Col

lect

or):

+12V

IC80

4 pi

n 14

: +5V

9-4

BDP-S360

Vide

o se

ctio

n flo

wch

art

Rep

rodu

ced

vide

o do

es n

ot a

ppea

r rig

ht

Is th

e flu

ores

cent

tube

/LE

D d

ispl

ay c

orre

ct?

No

To M

ain

flow

char

t

Y

es

Is th

e dr

ive

oper

atin

g pr

oper

ly?

No

To D

rive

flow

char

t

Y

es

Che

ck th

e in

put o

f eac

h po

wer

sup

ply.

No

Rep

lace

the

IC li

nk.

Q81

5 (E

mitt

er):

-9V

IC80

5 pi

n 5:

+6V

Whe

n Q

815

is d

efec

tive:

Rep

lace

PS

804

Whe

n IC

805

is d

efec

tive:

Rep

lace

PS

803

Yes

Che

ck th

e ou

tput

of e

ach

pow

er s

uppl

y.N

oC

heck

the

cont

rol o

f eac

h po

wer

sup

ply.

No

Che

ck th

e co

ntro

l lin

es

Q81

5 (C

olle

ctor

): -8

VIC

805

pin

4: +

3.3V

Q81

3 (E

mitt

er):

3.3V

IC80

5 pi

n 1:

5V

Whe

n Q

813

is d

efec

tive:

Che

ck P

CO

NT2

Whe

n IC

805

is d

efec

tive:

Che

ck S

W5V

D

Yes

Yes

Rep

lace

men

t dev

ice

Whe

n Q

801

(Col

lect

or) i

s de

fect

ive:

Rep

lace

Q80

1W

hen

IC80

5 pi

n 4

is d

efec

tive:

Rep

lace

IC80

5

Che

ck -5

V P

ower

sup

ply

No

Rep

lace

men

t dev

ice

IC80

6 O

UTP

UT:

-5V

Rep

lace

IC80

6

Yes

Are

vid

eo s

igna

ls in

put t

o IC

808?

No

Che

ck th

e w

iring

from

IC10

1.

Pin

8 Y

sig

nal

Pin

3 C

sig

nal

Pin

10

Y s

igna

lP

in 1

2 C

b si

gnal

Pin

14

Cr s

igna

l

Yes

Are

con

trol s

igna

ls in

put t

o IC

808?

No

Che

ck th

e w

iring

from

IC10

1.

IC80

8 pi

n 16

PS

1 (X

VM

UTE

+3.

3V)

IC80

8 pi

n 15

PS

2 (X

VM

UTE

+3.

3V)

Yes

Is a

vid

eo s

igna

l out

put f

rom

IC80

8?N

oR

epla

ce IC

808

Yes

Is a

sig

nal o

utpu

t fro

m e

ach

Vid

eo o

utpu

tco

nnec

tor?

No

Che

ck o

utpu

t res

isto

rs (R

8045

, R80

41,

R80

42, a

nd R

8043

).C

heck

the

pin

jack

blo

ck.

9-5

BDP-S360

Driv

e flo

wch

art

BD

P-B

X2/

S35

7/S

360/

S36

3 ca

n pl

ay th

e B

D-d

isc.

NO

Che

ck D

rive

Pow

er S

uppl

yC

N30

1 pi

n 15

: 12V

/pin

12:

5V

?

NO

Che

ck P

S30

1, P

S30

3 an

d P

S30

4R

epla

ce P

S w

hen

open

Ye

s

Y

es

Che

ck/re

plac

e th

e FF

C c

able

, the

n ch

eck

BD

P-B

X2/

S35

7/S

360/

S36

3 op

erat

es n

orm

ally

.FF

C C

able

(1-x

xxxx

xxx)

NO

Che

ck th

e O

ptic

al B

lock

Uni

t (B

U) b

y se

rvic

em

ode.

(Flo

wch

art z

z) B

U Io

p is

OK

?N

OR

epla

ce th

e B

U.

Yes

Yes

OK

Opt

ical

Blo

ck C

heck

(Flo

wch

art y

y)

BD

P-B

X2/

S35

7/S

360/

S36

3 ca

n pl

ay th

e D

VD

/CD

-dis

c.N

O

Ye

s

Flow

cha

rt N

o.xx

(oth

er c

heck

she

et)

BU

Che

ck F

low

[zz]

~ B

efor

e B

U R

epla

cem

ent ~

BU

Adj

ustm

ent F

low

[yy]

~ A

fter B

U/M

B R

epla

cem

ent ~

Ent

er th

e S

ervi

ce M

ode

Pre

ss <

Ope

n/C

lose

>, <

PLA

Y>,

<S

TOP

> an

dpl

ug in

AC

pow

er.

Rem

ove

the

defe

ctiv

e B

U fr

om L

oadi

ng A

ssy.

Als

o re

mov

e th

e B

U d

umpe

rs (4

pcs)

Sel

ect [

2] D

riveM

enu

Unp

ack

new

par

ts a

nd ta

ke B

arco

de p

hoto

by

cam

era

Sel

ect [

7] D

elta

IOP

Che

ck fo

r che

ckin

g.sp

ecifi

catio

n B

D, D

VD

, CD

; with

in ±

12

NO

Iop

is o

ut o

f spe

cific

atio

n, re

plac

e B

U to

new

one.

Ass

embl

e B

U w

ith d

umpe

rs to

Loa

ding

Ass

’y(ti

ghte

n sc

rew

with

2kg

f)

Ye

s

)yy trahcwolF( kceh

C kcolB lacitp

Ogai

DeciveDevir

D kcehC

Dec

ode

the

Bar

code

pho

to b

y us

ing

BD

BU

Dec

.exe

and

sav

e th

e te

xt d

ata

to U

SB

mem

ory

Ent

er th

e se

rvic

e m

ode

and

inse

rt U

SB

mem

ory

to re

ar p

anel

The

Iop

data

is w

ithin

spe

cific

atio

n, tu

rn o

ffth

e po

wer

Sel

ect [

2] D

riveM

enu

[3] R

ewrit

eOP

Dat

aTu

rn O

n th

e P

ower

and

che

ck th

e pl

ayba

ckpe

rform

ance

by

usin

g C

D, D

VD

and

BD

.

Afte

r fin

ishi

ng th

e R

ewrit

e O

P d

ata,

con

firm

[7] D

elta

IOP

Che

ck fo

r BU

Las

er q

ualit

y.

BLX

-104

DV

D T

ES

T D

ISC

:H

LX-5

13C

D T

ES

T D

ISC

:Y

ED

S-1

8

BLX

-104

DV

D T

ES

T D

ISC

: HLX

-513

CD

TE

ST

DIS

C: Y

ED

S-1

8

Th

e fo

llow

ing

case

s ne

ed A

djus

tmen

ts;

(

1) R

epla

ce B

U (M

B is

orig

inal

)

(2)

Rep

lace

MB

(BU

is o

rigin

al)

(

3) R

epla

ce b

oth

BU

and

MB

JI

G R

equi

rem

ent

D

igita

l cam

era

(

reco

mm

end

with

mac

ro m

ode)

B

arco

de d

ecod

er (B

DB

UD

ec.e

xe)

i

nsta

lled

in J

IG

P

C’s

U

SB

mem

ory

E

SD

wor

k be

nch

9-6

BDP-S360

IFco

n se

ctio

n flo

wch

art (

1/2)

IFco

n bl

ock

pow

er s

uppl

y ch

eck

UN

SW

3.3V

vol

tage

(+3.

3 V

)Is

3.3

V o

utpu

t fro

m IC

301

pin

4?

No

Inpu

t vol

tage

Is +

5.8

V in

put t

o IC

301

pin

5?

No

Is th

e fu

se (P

S30

1) b

low

n?N

oTo

Pow

er S

uppl

y (S

yste

m) f

low

char

t

Yes

Ye

s

Yes

Rep

lace

PS

301

If sy

mpt

oms

do n

ot im

prov

e, c

heck

for

a sh

ort o

n th

e ci

rcui

t boa

rd.

RE

G c

ontro

l vol

tage

Is +

5.8

V in

put t

o IC

301

pin

1?

No

Rep

lace

IC30

1

Ye

s

P_FA

IL d

etec

tion

oper

atio

n ch

eck

Rep

lace

R30

5If

sym

ptom

s do

not

impr

ove,

repl

ace

IC30

1.

Che

ck th

e P

_FA

IL v

olta

ge

Is +

3.3

V o

utpu

t fro

m IC

1404

pin

1?

No

Rep

lace

R14

65 a

nd c

heck

for +

3.3

V a

tIC

1404

pin

1. I

f sym

ptom

s do

not

impr

ove,

repl

ace

IC14

04 (P

_FA

IL d

etec

tion)

.

No

Yes

Mai

n un

it ke

y ch

eck

K

ey T

able

Che

ck o

f key

vol

tage

from

mai

n un

itK

ey T

able

() w

hen

key

is p

ress

edor

not

pre

ssed

.

No

Is th

e FF

C fr

om C

N14

04 d

isco

nnec

ted?

(Oth

er th

an th

e P

OW

ER

key

)N

o

Is th

e ha

rnes

s fro

m C

N30

1 di

scon

nect

ed?

(PO

WE

R k

ey)

Is th

e FL

-193

har

ness

from

the

pow

er s

uppl

ydi

scon

nect

ed?

(PO

WE

R k

ey)

Yes

Rem

ote

cont

rol o

pera

tion

chec

k

Che

ck th

e w

avef

orm

whe

n th

e re

mot

eco

ntro

l but

ton

is n

ot p

ress

ed.

No

Che

ck w

heth

er th

e FF

C is

dis

conn

ecte

d fro

mC

N14

04. (

Oth

er th

an th

e P

OW

ER

key

)

No

Che

ck o

f the

3.3

V v

olta

geC

N14

04 p

in 1

7, a

nd IC

1403

pin

24

Is th

ere

a pr

oble

m w

ith th

e R

B14

03 m

ount

ing

cond

ition

?

Yes

Che

ck o

f the

wav

efor

m w

hen

the

key

is p

ress

ed.

In c

ompa

rison

with

a n

orm

al w

avef

orm

,is

the

wav

efor

m o

f the

vol

tage

out

put

corr

ectly

?

No

Is th

e re

mot

e co

ntro

l tha

t is

used

in th

ein

spec

tion

brok

en?

No

Doe

s re

plac

emen

t of t

he F

L/FR

boa

rd re

sult

in im

prov

emen

t?

No

Yes

Che

ck w

heth

er th

e FF

C is

dis

conn

ecte

d fro

mC

N14

04. (

Oth

er th

an th

e P

OW

ER

key

)

Y

es

To F

L/FR

boa

rd fl

owch

art

Is th

ere

a pr

oble

m w

ith th

e m

ount

ing

cond

ition

of R

B14

01, o

r 140

2?Is

ther

e a

prob

lem

with

the

mou

ntin

gco

nditi

on o

f C14

14, 1

415,

141

6, o

r 141

7?

PO

WE

R:

CN

301

pin

1 K

EY

0S

TOP

: CN

1404

pin

13

KE

Y 1

OP

EN

/CLO

SE

: CN

1404

pin

14

KE

Y 2

PLA

Y: C

N14

04 p

in 1

5 K

EY

3

9-7

BDP-S360

IFco

n se

ctio

n flo

wch

art (

2/2)

Che

ck o

f IFc

on re

set i

n put

port

Is th

e vo

ltage

of I

C14

03 p

in 6

"H" (

3.3

V)?

No

Is th

ere

a pr

oble

m w

ith th

e m

ount

ing

cond

ition

of R

1414

, C14

10, o

r R14

08?

Yes

Yes

Pcon

t out

putp

ort c

heck

Che

ck o

f eac

h po

wer

sup

ply

cont

rol p

ort

whe

n th

e po

wer

is O

N

Cor

resp

ondi

ng o

utpu

t

IC14

03 p

in 2

0 P

cont

3IC

1403

pin

21

Pco

nt2

IC14

03 p

in 2

8 P

cont

1IC

1403

pin

31

Pco

nt4

IC14

03 p

in 3

2 A

TAP

CO

NT2

IC14

03 p

in 3

3 A

TAP

CO

NT2

SW

3.3V

out

put

1.05

V s

yste

m o

utpu

tD

CS

W3.

3V o

utpu

t1.

8 V

sys

tem

out

put

DR

_SW

12V

out

put

PO

WE

R (3

.3 V

and

1.5

V) o

utpu

t

No

Che

ck fo

r sho

rts a

t eac

h po

rtN

oA

ll th

e po

rts g

o "H

" with

in 2

to 1

0 m

s, b

utso

on g

o "L

".

No

Yes

Yes

Yes

Do

the

sym

ptom

s im

prov

e af

ter c

heck

ing

the

sold

erin

g an

d pa

ttern

of I

C14

03?

No

Pow

er s

u ppl

y ou

tput

che

ckSW

3.3V

Sho

rt c

ircui

t ope

ratio

n ch

eck

Che

ck th

e ou

tput

of t

he c

orre

spon

ding

volta

ge.

No

Whe

n IC

1403

pin

20

Pco

nt3

has

gone

"H",

isth

e S

W3.

3V v

olta

ge o

utpu

t?

Yes

No

To P

ower

Sup

ply

(Sys

tem

) flo

wch

art

Do

the

sym

ptom

s im

prov

e af

ter c

heck

ing

the

mou

ntin

g co

nditi

on o

f R14

39, R

1442

, and

IC14

03 p

in 5

2?

No

Rep

lace

IC14

03 o

r rep

lace

the

MB

boa

rd.

To D

rive

flow

char

tB

U A

djus

tmen

t Flo

w [y

y] ~

Afte

r BU

/MB

Rep

lace

men

t ~

Yes

Che

ck S

YS_R

ST s

igna

l out

put

Is IC

1403

pin

35

"H" (

3.3

V)?

The

mou

ntin

g co

nditi

on o

f R91

9 an

d R

523

are

OK

.

No

Rep

lace

IC14

03 a

nd th

e M

B b

oard

.To

Driv

e flo

wch

art

BU

Adj

ustm

ent F

low

[yy]

~ A

fter B

U/M

BR

epla

cem

ent ~

No

Yes

Che

ck th

e co

mm

unic

atio

n w

ith th

e ho

st C

PU(S

YSC

ON

_REQ

sig

nal c

heck

)

Do

cycl

ical

"H" a

nd "L

" com

mun

icat

ion

wav

efor

ms

com

e to

IC14

03 p

in 3

6?

No

Is th

ere

a pr

oble

m w

ith th

e m

ount

ing

cond

ition

of R

1450

, or 1

462?

No

Do

the

sym

ptom

s im

prov

e af

ter r

epla

cing

IC10

1?

No

Yes

Che

ck th

e co

mm

unic

atio

n w

ith th

e ho

st C

PU(S

eria

l com

mun

icat

ion

sign

al c

heck

)

Do

cycl

ical

"H" a

nd "L

" com

mun

icat

ion

wav

efor

ms

com

e to

IC14

03 p

ins

25, 2

6, a

nd27

?

No

Is th

ere

a pr

oble

m w

ith th

e m

ount

ing

cond

ition

of R

B14

03, R

1430

, R93

7, R

936,

R93

9, o

r R93

8?

No

Rep

lace

IC14

03 o

r rep

lace

the

MB

boa

rd.

To D

rive

flow

char

tB

U A

djus

tmen

t Flo

w [y

y] ~

Afte

r BU

/MB

Rep

lace

men

t ~

Is th

e vo

ltage

at t

he "H

" lev

el (3

.3 V

)?

SW

3.3V

out

put

1.05

V s

yste

m o

utpu

tD

CS

W3.

3V o

utpu

t1.

8 V

sys

tem

out

put

DR

_SW

12V

out

put

PO

WE

R (3

.3 V

and

1.5

V) o

utpu

t

9-8

BDP-S360

FL/F

R B

oard

flow

char

t (1/

3)

Pow

er b

utto

n on

the

mai

n un

it do

es n

ot w

ork

Ke y

1 do

es n

ot o

pera

te

Doe

s sy

mpt

om im

prov

e w

hen

repl

acin

g th

e FL

boa

rd?

No

To IF

con

sect

ion

flow

char

tIs

ther

e vo

ltage

of a

bout

3.3

V a

t pin

13 o

f CN

701

with

out p

ress

ing

the

keys

?N

oTo

IFco

n se

ctio

n flo

wch

art

Yes

Yes

The

pote

ntia

l of p

in 1

of C

N33

1 do

esno

t cha

nge

from

3.3

V to

nea

r 0V

whe

n pr

essi

ng th

e po

wer

but

ton

No

Che

ck p

atte

rn a

nd S

331

mig

ht b

ebr

oken

.

Che

ck th

e re

sist

ance

of r

esis

tors

of

Key

1 lin

e. A

lso

chec

k th

e su

rrou

ndin

gpa

ttern

.

Yes

Dis

conn

ecte

d ha

rnes

s or

repl

ace

FLbo

ard.

Ke y

ope

ratio

ns c

anno

t be

mad

e on

Key

2 do

es n

ot o

pera

te

Doe

s sy

mpt

om im

prov

e w

hen

repl

acin

g th

e FR

boa

rd?

No

To IF

con

sect

ion

flow

char

tIs

ther

e vo

ltage

of a

bout

3.3

V a

t pin

14 o

f CN

701

with

out p

ress

ing

the

keys

?N

oTo

IFco

n se

ctio

n flo

wch

art

Yes

Yes

Whi

ch ro

w o

f key

s do

not

ope

rate

?R

efer

ence

: Rel

atio

nshi

p of

But

tons

and

Vol

tage

sC

heck

the

resi

stan

ce o

f res

isto

rs o

fK

ey2

line.

Als

o ch

eck

the

surr

ound

ing

patte

rn.

STO

P b

utto

ns ->

To

Key

1 do

es n

ot o

pera

te

OP

EN

/CLO

SE

but

ton

-> T

o K

ey2

does

not

ope

rate

PLA

Y b

utto

n ->

To

Key

3 do

es n

ot o

pera

te

Ke y

3 do

es n

ot o

pera

te

Is th

ere

volta

ge o

f abo

ut 3

.3V

at p

in15

of C

N70

1 w

ithou

t pre

ssin

g th

eke

ys?

No

To IF

con

sect

ion

flow

char

t

Yes

Che

ck th

e re

sist

ance

of r

esis

tors

of

Key

3 lin

e. A

lso

chec

k th

e su

rrou

ndin

gpa

ttern

.

9-9

BDP-S360

FL/F

R B

oard

flow

char

t (2/

3)

FLD

doe

s no

t lig

htLE

D d

oes

not l

ight

Is th

ere

volta

ge o

f abo

ut 5

.8V

at

PS

701?

No

To "F

LD S

witc

h S

urro

undi

ng C

heck

"Is

ther

e vo

ltage

of a

bout

5.8

V a

tP

S70

1?

No

To "L

ED

Sw

itch

Sur

roun

ding

Che

ck"

Yes

Yes

Is th

ere

volta

ge o

f abo

ut -2

2V a

tJL

701?

No

Che

ck th

e ci

rcui

ts s

urro

undi

ng th

eFL

D D

D C

ON

VE

RTE

R.

If N

G, t

hen

repl

ace

the

FR b

oard

.

Is th

ere

volta

ge o

f abo

ut 5

.8V

at

Em

itter

Q70

9 ?

No

Che

ck th

e "L

ED

Sw

itch

Sur

roun

dch

eck"

If N

G, t

hen

repl

ace

the

FR b

oard

.

Yes

Yes

Is th

ere

volta

ge o

f 3.3

V a

t Pin

43

ofIC

702

?

No

Che

ck th

e 3.

3V li

ne o

f the

FR

boa

rd.

Is th

ere

volta

ge o

f 3.3

V a

t Pin

43

ofIC

702

?

No

Che

ck th

e 3.

3V li

ne o

f the

FR

boa

rd.

Yes

Yes

Is p

in 5

of I

C70

2 os

cilla

ting?

No

Rep

lace

IC70

2. If

no

effe

ct, r

epla

ceth

e FR

boa

rd.

Is p

in 1

and

pin

2 of

IC70

2 ab

out

3.3V

?

No

Rep

lace

IC70

2.If

no e

ffect

, rep

lace

the

FR b

oard

.

Yes

Yes

Is th

ere

inpu

t of p

ulse

to p

ins

7, 8

and

9 of

IC70

2?

No

Rep

lace

FFC

bet

wee

n FR

and

MB

.If

no e

ffect

, the

n go

to "I

FD f

low

"R

epla

ce Q

711

and

Q71

0, if

no

effe

ctth

en re

plac

e FR

boa

rd

Yes

Che

ck c

onne

ctio

n of

FLD

and

IC70

2.R

epla

ce IC

702

if O

K.

If no

effe

ct, r

epla

ce th

e FL

boa

rd.

FLD

Sw

itch

Surr

ound

ing

Che

ck

Is th

e po

tent

ial o

f pin

3 o

f Q70

4 5.

8V?

No

Che

ck th

e 5.

8V li

ne o

f the

FR

boa

rd.

Yes

Is th

e po

tent

ial o

f the

bas

e of

Q70

4ar

ound

5V

?Ye

sIs

the

colle

ctor

vol

tage

of Q

703

abou

t0V

?N

oIs

the

volta

ge o

f the

bas

e of

Q70

3 at

3.3V

?N

oIs

pin

7 o

f CN

701

at 3

.3V

?N

o

Rep

lace

FFC

, and

Che

ck p

atta

ern

near

IC14

03 o

f MB

boa

rd. R

epla

ceIC

1403

or M

B b

oard

if N

G.

To D

rive

flow

char

tB

U A

djus

tmen

t Flo

w [y

y] ~

Afte

rB

U/M

B R

epla

cem

ent ~

No

Yes

Yes

Yes

Rep

lace

Q70

4R

epla

ce Q

704

Rep

lace

Q70

3R

epla

ce th

e FR

boa

rd

9-10

BDP-S360

FL/F

R B

oard

flow

char

t (3/

3)

LED

Sw

itch

Surr

ound

ing

Che

ck

Is th

e po

tent

ial o

f pin

3 o

f Q70

9 5.

8V?

No

Che

ck th

e 5.

8V li

ne o

f the

FR

boa

rd.

Yes

Is th

e po

tent

ial o

f the

bas

e of

Q70

9ar

ound

5V

?Ye

sIs

the

colle

ctor

vol

tage

of Q

708

abou

t0V

?N

oIs

the

volta

ge o

f the

bas

e of

Q70

8 at

3.3V

?N

oIs

pin

6 o

f CN

701

at 3

.3V

?N

o

Rep

lace

FFC

, and

Che

ck p

atta

ern

near

IC14

03 o

f MB

boa

rd. R

epla

ceIC

1403

or M

B b

oard

if N

G.

To D

rive

flow

char

tB

U A

djus

tmen

t Flo

w [y

y] ~

Afte

rB

U/M

B R

epla

cem

ent ~

No

Yes

Yes

Yes

Rep

lace

Q70

9R

epla

ce Q

709

Rep

lace

Q70

8R

epla

ce th

e FR

boa

rd

Rem

ote

cont

rol d

oes

not o

pera

te

Sym

ptom

impr

ove

whe

n re

plac

ing

FRbo

ard?

No

Are

ther

e si

gnal

s to

pin

17

of M

Bbo

ard

CN

1404

?

No

Rep

lace

FFC

Yes

Yes

Are

ther

e si

gnal

s to

IC14

03 p

in 2

4?N

oC

heck

MB

pat

tern

nea

r IC

1403

Yes

To IF

con

sect

ion

flow

char

t

Is th

ere

outp

ut o

f abo

ut 3

.3V

for

pote

ntia

l of

CN

701

pin

17?

No

Rep

lace

IC70

1 an

d ch

eck

FR b

oard

patte

rn

Yes

Dis

conn

ecte

d fle

xibl

e ha

rnes

s

9-11

BDP-S360

Fan

flow

char

t

The

FAN

ER

R d

ispl

ay a

ppea

rs o

n th

eflu

ores

cent

tube

sur

face

.

Ent

er th

e S

ervi

ce M

ode

and

turn

on

the

fan

from

the

IFco

n m

enu.

Is th

e vo

ltage

of C

N14

03 p

in 3

on

the

orde

rof

10

V?

No

Dis

conn

ect t

he h

arne

ss fr

om th

e fa

n th

at is

inse

rted

in C

N14

03, a

nd ta

ke th

em

easu

rem

ent a

gain

.Is

it o

n th

e or

der o

f 10

V?

No

Is th

e vo

ltage

of I

C14

01pi

n 2

on th

e or

der o

f3.

3 V

?N

oIs

the

conn

ectio

n be

twee

n IC

1401

pin

1an

dIC

1403

pin

58

brok

en?

Als

o ch

eck

whe

ther

the

trace

is b

ridge

d w

ithth

e ad

jace

nt o

ne.

Yes

Yes

Yes

Is th

e fa

n ro

tatin

g?N

oR

epla

ce th

e fa

n.C

heck

aro

und

the

fan

pow

er s

uppl

y(IC

1401

).

Yes

Is F

anS

tate

of t

he S

ervi

ce M

ode

scre

en s

etto

ON

?N

o

Dis

conn

ect t

he h

arne

ss fr

om th

e fa

n th

at is

inse

rted

in C

N14

03, a

nd s

hort

pins

1 a

nd 2

toge

ther

.D

oes

FanS

tate

of t

he S

ervi

ce M

ode

scre

engo

ON

?

No

Is th

e co

nnec

tion

betw

een

IC14

03 p

in 2

and

IC14

03 p

in 5

5 br

oken

?A

lso

chec

k w

heth

er th

e tra

ce is

brid

ged

with

the

adja

cent

one

.

Yes

Yes

Che

ck w

heth

er s

omet

hing

is c

augh

t in

the

fan

blad

es.

If th

ere

is n

othi

ng th

ere,

repl

ace

the

fan.

Rep

lace

the

fan.

9-12

BDP-S360

Ethe

rnet

flow

char

t

Can

not c

onne

ct w

ith th

e ne

twor

k, c

anno

tup

date

the

netw

ork.

Is th

e LA

N c

able

plu

gged

in p

rope

rly?

No

Plu

g in

the

LAN

cab

le fi

rmly

.

Y

es

Is th

e LE

D o

f the

hub

rout

er li

t?(L

INK

LE

D)

No

Is p

ower

sup

plie

d to

the

MB

boa

rd?

No

To P

ower

Sup

ply

(Sys

tem

) flo

wch

art

Y

es

Yes

Rep

lace

the

MB

boa

rd.

To D

rive

flow

char

tB

U A

djus

tmen

t Flo

w [y

y] ~

Afte

r BU

/MB

Rep

lace

men

t ~

Are

the

netw

ork

setti

ngs

of th

e m

enu

corr

ect?

No

Mak

e th

e co

rrec

t net

wor

k se

tting

s.

Y

es

Rep

lace

the

MB

boa

rd.

To D

rive

flow

char

tB

U A

djus

tmen

t Flo

w [y

y] ~

Afte

r BU

/MB

Rep

lace

men

t ~

9-13E

BDP-S360

USB

Dev

ice

flow

char

t

The

USB

dev

ice

is n

ot re

cogn

ized

.

Inse

rt th

e U

SB

dev

ice

agai

n. Is

it re

cogn

ized

whe

n th

e po

wer

istu

rned

OFF

and

then

ON

aga

in?

No

Is 5

V p

rese

nt a

t CN

361

pin

1?N

oIs

5 V

pre

sent

at C

617?

No

Is 5

.8 V

pre

sent

at C

610?

No

Pow

er s

uppl

y bo

ard

defe

ctiv

e

Yes

Y

es

Yes

Yes

Poo

r con

tact

of t

he U

SB

dev

ice

Def

ectiv

e ha

rnes

s be

twee

n th

e U

SB

boar

d an

d th

e M

B b

oard

.D

oes

repl

acin

g IC

601

impr

ove

the

sym

ptom

s?N

oR

epla

ce th

e M

B b

oard

.To

Driv

e flo

wch

art

BU

Adj

ustm

ent F

low

[yy]

~ A

fter

BU

/MB

Rep

lace

men

t ~

Yes

Rep

lace

the

harn

ess

betw

een

the

MB

boar

d an

d th

e U

SB

boa

rd.

Do

the

sym

ptom

s im

prov

e?

No

Rep

lace

the

MB

boa

rd.

To D

rive

flow

char

tB

U A

djus

tmen

t Flo

w [y

y] ~

Afte

rB

U/M

B R

epla

cem

ent ~

IC60

1 de

fect

ive

Y

es

Def

ectiv

e ha

rnes

s be

twee

n th

e U

SB

boar

d an

d th

e M

B b

oard

10-1

BDP-S360SECTION 10

REPAIR PARTS LIST

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark

1 A-1729-291-A PAINEL FRONTAL MONTADO

2 Y-8287-041-A TAMPA SUPERIOR MONTADO 3 3-070-883-71 SCREW, TAPPING 4 3-710-901-71 SCREW, TAPPING

The components identified by mark or dotted line with mark are critical for safety.Replace only with part number specified.

Les composants identifiés par une marque sont critiquens pour la sécurité.Ne les remplacer que par une pièce portant le numéro spécifié.

3

2

4

3

1

The components identified by mark contain confidential information.Strictly follow the instructions whenever the components are repaired and/or replaced.

Les composants identifiés par la marque contiennent des informations confidentielles.Suivre scrupuleusement les instructions chaque fois qu’un composant est remplacé et / ou réparé.

10-1. EXPLODED VIEWS

10-1-1. CASE SECTION

NOTE:• -XX and -X mean standardized parts, so they

may have some difference from the original one.• Color Indication of Appearance Parts Example: KNOB, BALANCE (WHITE) . . . (RED) Parts Color Cabinet’s Color• Items marked “*” are not stocked since they are

seldom required for routine service. Some delay should be anticipated when ordering these items.

• The mechanical parts with no reference number in the exploded views are not supplied.

10-2

BDP-S360

10-1-2. FRONT/REAR CHASSIS SECTION


51 A-1728-556-A FR-301 BOARD, COMPLETE

52 A-1728-555-A FL-193 BOARD, COMPLETE

53 1-836-486-11 CABLE, FLEXIBLE FLAT (FMF-003) 54 3-710-901-71 SCREW, TAPPING

M1401 1-787-760-21 FAN, D.C. #1 7-682-544-04 +B 3X3

not supplied(+BV3)

not supplied(+BV3)

not supplied(+BV3)

not supplied(+BV3)

51

52

53

54

not supplied

not supplied

not suppliednot supplied

not suppliedM1401

#1

not supplied(+P)

not supplied

10-3

BDP-S360

10-1-3. MAIN CHASSIS SECTION


101 A-1728-551-A REGULATOR, SWITCHING (SRV2183WW ) 102 A-1728-554-A MB-127 BOARD, COMPLETE

103 A-1728-605-A USB-014 BOARD, COMPLETE 104 2-319-429-01 CUSHION, FOOT

not supplied(+BV3)

not supplied(+BV3)

not supplied

not supplied(+BV3)

not supplied

not supplied(+BV3)

101

102

103

104

not supplied

not supplied(+BV3)



10-4

BDP-S360

10-1-4. BD SECTION


151 A-1727-332-A LOADING FOR SERVICE 152 4-137-203-01 HOLDER, FFC (EXCEPT EC1, EC2, CEK)

153 3-087-053-11 +BVTP2.6 (3CR) 154 1-836-504-11 CABLE, FLEXIBLE FLAT 155 8-820-424-02 DEVICE,OPTICAL KEM-430AAA/C2RP

151

152

154

155

not supplied

not supplied

not supplied

not supplied

not supplied not supplied

153



10-5

BDP-S360

10-1-5. ACESSÓRIOS

Ref. No. Part No. Description Remark

201 1-487-218-11 CONTROLE REMOTO (RMT-B104A)

0 202 1-836-806-21 CABO DE FORÇA

203 1-835-855-11 CABO HDMI* 4-135-580-31 MANUAL DE INSTRUÇÕES

201Controle Remoto(RMT-B104A)

202Cabo de Força

203Cabo HDMI



10-6

BDP-S360

10-2. ELECTRICAL PARTS LISTNOTE:• Due to standardization, replacements in the parts

list may be different from the parts specified in the diagrams or the components used on the set.

• -XX and -X mean standardized parts, so they may have some difference from the original one.

• RESISTORS All resistors are in ohms. METAL: Metal-film resistor. METAL OXIDE: Metal oxide-film resistor. F: nonflammable• Items marked “*” are not stocked since they are

seldom required for routine service. Some delay should be anticipated when ordering

these items.• SEMICONDUCTORS In each case, u: , for example: uA. . : A. . uPA. . : PA. . uPB. . : PB. . uPC. . : PC. . uPD. . : PD. .

• CAPACITORS uF: F• COILS uH: H



When indicating parts by reference number, please include the board.


A-1728-555-A FL-193 BOARD, COMPLETE *********************

< CONNECTOR >

CN331 1-770-160-21 PIN, CONNECTOR (PC BOARD) 2P

< SWITCH >

S331 1-771-410-21 SWITCH, TACTILE (I/1)

A-1728-556-A FR-301 BOARD, COMPLETE **********************

< CAPACITOR >

C701 1-115-339-11 CERAMIC CHIP 0.1uF 10% 50V C703 1-125-972-91 ELECT 100uF 20% 16V C704 1-124-589-11 ELECT 47uF 20% 16V C707 1-107-726-91 CERAMIC CHIP 0.01uF 10% 16V C711 1-115-339-11 CERAMIC CHIP 0.1uF 10% 50V

C712 1-128-131-11 ELECT 22uF 20% 50V C713 1-115-339-11 CERAMIC CHIP 0.1uF 10% 50V C714 1-107-726-91 CERAMIC CHIP 0.01uF 10% 16V C715 1-107-726-91 CERAMIC CHIP 0.01uF 10% 16V C716 1-115-339-11 CERAMIC CHIP 0.1uF 10% 50V

C717 1-164-217-11 CERAMIC CHIP 150PF 5% 50V C718 1-164-217-11 CERAMIC CHIP 150PF 5% 50V

< CONNECTOR >

CN701 1-793-806-51 CONNECTOR, FFC/FPC 17P

< DIODE >

D703 8-719-988-61 DIODE 1SS355TE-17 D704 8-719-988-61 DIODE 1SS355TE-17 D705 8-719-988-61 DIODE 1SS355TE-17 D706 8-719-988-61 DIODE 1SS355TE-17

D707 6-501-726-01 DIODE MAZ8047GMLS0

< IC >

IC701 6-600-665-01 IC GP1UE27XK0VF IC702 6-701-729-01 IC PT6315

< COIL >

L701 1-411-919-11 INDUCTOR 100uH

< FLUORESCENT INDICATOR TUBE >

ND701 1-483-022-11 INDICATOR TUBE, FLUORESCENT

< IC LINK >

PS701 1-576-122-21 IC LINK 0.4A 72V

< TRANSISTOR >

Q703 8-729-421-19 TRANSISTOR UN2213 Q704 8-729-904-87 TRANSISTOR 2SB1197K-R Q706 8-729-901-88 TRANSISTOR 2SC2411K-CR Q707 8-729-901-88 TRANSISTOR 2SC2411K-CR Q708 8-729-421-19 TRANSISTOR UN2213

Q709 8-729-904-87 TRANSISTOR 2SB1197K-R Q710 8-729-421-19 TRANSISTOR UN2213 Q711 8-729-421-19 TRANSISTOR UN2213

< RESISTOR >

R701 1-216-833-11 METAL CHIP 10K 5% 1/10W R702 1-216-033-00 METAL CHIP 220 5% 1/10W R705 1-216-821-11 METAL CHIP 1K 5% 1/10W R707 1-216-828-11 METAL CHIP 3.9K 5% 1/10W R712 1-216-825-11 METAL CHIP 2.2K 5% 1/10W

R713 1-216-825-11 METAL CHIP 2.2K 5% 1/10W R714 1-216-838-11 METAL CHIP 27K 5% 1/10W R715 1-216-845-11 METAL CHIP 100K 5% 1/10W R717 1-216-033-00 METAL CHIP 220 5% 1/10W R718 1-216-829-11 METAL CHIP 4.7K 5% 1/10W

R719 1-216-825-11 METAL CHIP 2.2K 5% 1/10W R720 1-216-805-11 METAL CHIP 47 5% 1/10W R721 1-216-833-11 METAL CHIP 10K 5% 1/10W

FR-301FL-193

The components identified by mark contain confidential information.Strictly follow the instructions whenever the components are repaired and/or replaced.

Les composants identifiés par la marque contiennent des informations confidentielles.Suivre scrupuleusement les instructions chaque fois qu’un composant est remplacé et / ou réparé.

10-7


BDP-S360

< SWITCH >

S701 1-771-410-21 SWITCH, TACTILE (Z) S702 1-771-410-21 SWITCH, TACTILE (x) S703 1-771-410-21 SWITCH, TACTILE (N)

< TRANSFORMER >

* T701 1-445-447-11 TRANSFORMER, DC-DC CONVERTER

A-1728-554-A MB-127 BOARD, COMPLETE

**********************

< CAPACITOR >

C102 1-100-916-11 CERAMIC CHIP 0.1uF 10% 16V C103 1-100-905-11 CERAMIC CHIP 0.001uF 10% 50V C105 1-100-905-11 CERAMIC CHIP 0.001uF 10% 50V C106 1-100-905-11 CERAMIC CHIP 0.001uF 10% 50V C107 1-100-905-11 CERAMIC CHIP 0.001uF 10% 50V


C116 1-100-916-11 CERAMIC CHIP 0.1uF 10% 16V C117 1-100-916-11 CERAMIC CHIP 0.1uF 10% 16V C118 1-100-916-11 CERAMIC CHIP 0.1uF 10% 16V C119 1-112-717-91 CERAMIC CHIP 1uF 10% 6.3V C120 1-100-905-11 CERAMIC CHIP 0.001uF 10% 50V


C133 1-100-905-11 CERAMIC CHIP 0.001uF 10% 50V C134 1-100-905-11 CERAMIC CHIP 0.001uF 10% 50V C135 1-100-909-11 CERAMIC CHIP 10uF 10% 6.3V C136 1-100-916-11 CERAMIC CHIP 0.1uF 10% 16V C137 1-112-717-91 CERAMIC CHIP 1uF 10% 6.3V




C163 1-112-717-91 CERAMIC CHIP 1uF 10% 6.3V C165 1-112-717-91 CERAMIC CHIP 1uF 10% 6.3V C166 1-112-717-91 CERAMIC CHIP 1uF 10% 6.3V C168 1-112-717-91 CERAMIC CHIP 1uF 10% 6.3V C170 1-100-567-81 CERAMIC CHIP 0.01uF 10% 25V



C213 1-100-905-11 CERAMIC CHIP 0.001uF 10% 50V C214 1-100-905-11 CERAMIC CHIP 0.001uF 10% 50V C215 1-100-905-11 CERAMIC CHIP 0.001uF 10% 50V C216 1-100-905-11 CERAMIC CHIP 0.001uF 10% 50V C222 1-112-717-91 CERAMIC CHIP 1uF 10% 6.3V



C240 1-112-717-91 CERAMIC CHIP 1uF 10% 6.3V C241 1-100-905-11 CERAMIC CHIP 0.001uF 10% 50V C245 1-100-905-11 CERAMIC CHIP 0.001uF 10% 50V C246 1-100-905-11 CERAMIC CHIP 0.001uF 10% 50V C247 1-100-905-11 CERAMIC CHIP 0.001uF 10% 50V



C265 1-112-717-91 CERAMIC CHIP 1uF 10% 6.3V C267 1-112-717-91 CERAMIC CHIP 1uF 10% 6.3V C268 1-112-717-91 CERAMIC CHIP 1uF 10% 6.3V C270 1-112-717-91 CERAMIC CHIP 1uF 10% 6.3V C276 1-100-567-81 CERAMIC CHIP 0.01uF 10% 25V

C277 1-100-567-81 CERAMIC CHIP 0.01uF 10% 25V C278 1-100-916-11 CERAMIC CHIP 0.1uF 10% 16V C301 1-100-909-11 CERAMIC CHIP 10uF 10% 6.3V C302 1-100-909-11 CERAMIC CHIP 10uF 10% 6.3V C303 1-100-916-11 CERAMIC CHIP 0.1uF 10% 16V

FR-301 MB-127

10-8


BDP-S360

C305 1-100-909-11 CERAMIC CHIP 10uF 10% 6.3V C306 1-100-909-11 CERAMIC CHIP 10uF 10% 6.3V C313 1-115-467-11 CERAMIC CHIP 0.22uF 10% 10V C315 1-100-567-81 CERAMIC CHIP 0.01uF 10% 25V C316 1-115-467-11 CERAMIC CHIP 0.22uF 10% 10V

C322 1-135-960-91 CERAMIC CHIP 10uF 10% 25V* C328 1-112-298-91 CERAMIC CHIP 1uF 10% 16V C329 1-112-300-91 CERAMIC CHIP 4.7uF 10% 10V* C331 1-112-298-91 CERAMIC CHIP 1uF 10% 16V C332 1-112-300-91 CERAMIC CHIP 4.7uF 10% 10V

C336 1-135-960-91 CERAMIC CHIP 10uF 10% 25V C337 1-100-567-81 CERAMIC CHIP 0.01uF 10% 25V C338 1-107-819-11 CERAMIC CHIP 0.022uF 10% 16V* C339 1-112-298-91 CERAMIC CHIP 1uF 10% 16V C343 1-100-916-11 CERAMIC CHIP 0.1uF 10% 16V

C344 1-112-300-91 CERAMIC CHIP 4.7uF 10% 10V C345 1-100-159-91 CERAMIC CHIP 22uF 10% 6.3V C346 1-100-159-91 CERAMIC CHIP 22uF 10% 6.3V C349 1-100-916-11 CERAMIC CHIP 0.1uF 10% 16V C350 1-100-672-11 CERAMIC CHIP 10uF 20% 16V

* C352 1-112-298-91 CERAMIC CHIP 1uF 10% 16V C355 1-112-300-91 CERAMIC CHIP 4.7uF 10% 10V C357 1-100-916-11 CERAMIC CHIP 0.1uF 10% 16V C358 1-100-916-11 CERAMIC CHIP 0.1uF 10% 16V C361 1-114-532-21 ELECT CHIP 330uF 20% 4V

C362 1-114-532-21 ELECT CHIP 330uF 20% 4V C366 1-100-159-91 CERAMIC CHIP 22uF 10% 6.3V C369 1-112-776-11 CERAMIC CHIP 0.0047uF 10% 50V C376 1-100-159-91 CERAMIC CHIP 22uF 10% 6.3V* C379 1-112-298-91 CERAMIC CHIP 1uF 10% 16V

C392 1-100-916-11 CERAMIC CHIP 0.1uF 10% 16V C395 1-100-916-11 CERAMIC CHIP 0.1uF 10% 16V C396 1-164-936-11 CERAMIC CHIP 680PF 10% 50V C397 1-112-775-11 CERAMIC CHIP 0.0022uF 10% 50V C398 1-164-936-11 CERAMIC CHIP 680PF 10% 50V



C411 1-164-847-11 CERAMIC CHIP 7PF 0.5PF 50V C413 1-164-847-11 CERAMIC CHIP 7PF 0.5PF 50V C414 1-100-916-11 CERAMIC CHIP 0.1uF 10% 16V C415 1-100-916-11 CERAMIC CHIP 0.1uF 10% 16V C416 1-100-916-11 CERAMIC CHIP 0.1uF 10% 16V






C514 1-100-916-11 CERAMIC CHIP 0.1uF 10% 16V C517 1-100-567-81 CERAMIC CHIP 0.01uF 10% 25V C602 1-165-884-11 CERAMIC CHIP 2.2uF 10% 6.3V C603 1-100-916-11 CERAMIC CHIP 0.1uF 10% 16V C604 1-100-905-11 CERAMIC CHIP 0.001uF 10% 50V

C605 1-165-884-11 CERAMIC CHIP 2.2uF 10% 6.3V C606 1-100-916-11 CERAMIC CHIP 0.1uF 10% 16V C607 1-164-848-11 CERAMIC CHIP 8PF 0.5PF 50V C608 1-164-848-11 CERAMIC CHIP 8PF 0.5PF 50V* C609 1-112-298-91 CERAMIC CHIP 1uF 10% 16V

C610 1-128-993-21 ELECT CHIP 22uF 20% 10V* C613 1-112-298-91 CERAMIC CHIP 1uF 10% 16V C617 1-128-394-11 ELECT CHIP 220uF 20% 10V C619 1-100-966-91 CERAMIC CHIP 10uF 20% 10V C624 1-100-567-81 CERAMIC CHIP 0.01uF 10% 25V

C704 1-100-567-81 CERAMIC CHIP 0.01uF 10% 25V C706 1-115-467-11 CERAMIC CHIP 0.22uF 10% 10V C707 1-100-916-11 CERAMIC CHIP 0.1uF 10% 16V C708 1-165-887-91 CERAMIC CHIP 0.22uF 10% 6.3V C709 1-100-567-81 CERAMIC CHIP 0.01uF 10% 25V



C801 1-112-717-91 CERAMIC CHIP 1uF 10% 6.3V C802 1-100-916-11 CERAMIC CHIP 0.1uF 10% 16V C803 1-100-916-11 CERAMIC CHIP 0.1uF 10% 16V C804 1-112-717-91 CERAMIC CHIP 1uF 10% 6.3V C805 1-100-916-11 CERAMIC CHIP 0.1uF 10% 16V

C807 1-100-916-11 CERAMIC CHIP 0.1uF 10% 16V C810 1-137-765-21 ELECT CHIP 47uF 20% 16V C812 1-100-916-11 CERAMIC CHIP 0.1uF 10% 16V C813 1-100-672-11 CERAMIC CHIP 10uF 20% 16V C814 1-100-916-11 CERAMIC CHIP 0.1uF 10% 16V

C815 1-100-905-11 CERAMIC CHIP 0.001uF 10% 50V C817 1-100-567-81 CERAMIC CHIP 0.01uF 10% 25V C818 1-100-909-11 CERAMIC CHIP 10uF 10% 6.3V C819 1-112-717-91 CERAMIC CHIP 1uF 10% 6.3V C821 1-112-717-91 CERAMIC CHIP 1uF 10% 6.3V

MB-127

10-9


BDP-S360

C824 1-100-905-11 CERAMIC CHIP 0.001uF 10% 50V C826 1-165-887-91 CERAMIC CHIP 0.22uF 10% 6.3V C828 1-100-909-11 CERAMIC CHIP 10uF 10% 6.3V* C829 1-112-298-91 CERAMIC CHIP 1uF 10% 16V C830 1-100-905-11 CERAMIC CHIP 0.001uF 10% 50V

C831 1-137-765-21 ELECT CHIP 47uF 20% 16V C833 1-112-717-91 CERAMIC CHIP 1uF 10% 6.3V C834 1-137-765-21 ELECT CHIP 47uF 20% 16V C835 1-112-717-91 CERAMIC CHIP 1uF 10% 6.3V C840 1-100-916-11 CERAMIC CHIP 0.1uF 10% 16V

C841 1-100-740-81 CERAMIC CHIP 390PF 5% 50V C842 1-100-740-81 CERAMIC CHIP 390PF 5% 50V C843 1-100-916-11 CERAMIC CHIP 0.1uF 10% 16V C844 1-100-905-11 CERAMIC CHIP 0.001uF 10% 50V C845 1-100-905-11 CERAMIC CHIP 0.001uF 10% 50V

C846 1-100-916-11 CERAMIC CHIP 0.1uF 10% 16V C847 1-100-740-81 CERAMIC CHIP 390PF 5% 50V C848 1-100-740-81 CERAMIC CHIP 390PF 5% 50V C849 1-100-916-11 CERAMIC CHIP 0.1uF 10% 16V C850 1-137-765-21 ELECT CHIP 47uF 20% 16V

C851 1-100-905-11 CERAMIC CHIP 0.001uF 10% 50V C852 1-137-765-21 ELECT CHIP 47uF 20% 16V C853 1-100-916-11 CERAMIC CHIP 0.1uF 10% 16V C855 1-100-916-11 CERAMIC CHIP 0.1uF 10% 16V C856 1-100-916-11 CERAMIC CHIP 0.1uF 10% 16V

C858 1-100-916-11 CERAMIC CHIP 0.1uF 10% 16V C859 1-137-765-21 ELECT CHIP 47uF 20% 16V C860 1-164-882-11 CERAMIC CHIP 220PF 5% 16V

(S357/S360: EC1, EC2, CEK, CH, RU, EA, KR/S363)

C861 1-164-882-11 CERAMIC CHIP 220PF 5% 16V (S357/S360: EC1, EC2, CEK,

CH, RU, EA, KR/S363) C864 1-100-916-11 CERAMIC CHIP 0.1uF 10% 16V

C865 1-100-916-11 CERAMIC CHIP 0.1uF 10% 16V C867 1-137-765-21 ELECT CHIP 47uF 20% 16V C869 1-100-916-11 CERAMIC CHIP 0.1uF 10% 16V C905 1-100-567-81 CERAMIC CHIP 0.01uF 10% 25V C1101 1-107-819-11 CERAMIC CHIP 0.022uF 10% 16V

C1106 1-100-567-81 CERAMIC CHIP 0.01uF 10% 25V C1107 1-100-567-81 CERAMIC CHIP 0.01uF 10% 25V C1108 1-100-567-81 CERAMIC CHIP 0.01uF 10% 25V C1109 1-100-567-81 CERAMIC CHIP 0.01uF 10% 25V C1110 1-127-760-11 CERAMIC CHIP 4.7uF 10% 6.3V

C1111 1-100-567-81 CERAMIC CHIP 0.01uF 10% 25V C1112 1-100-567-81 CERAMIC CHIP 0.01uF 10% 25V C1113 1-100-567-81 CERAMIC CHIP 0.01uF 10% 25V C1114 1-127-760-11 CERAMIC CHIP 4.7uF 10% 6.3V C1115 1-100-916-11 CERAMIC CHIP 0.1uF 10% 16V

C1116 1-100-567-81 CERAMIC CHIP 0.01uF 10% 25V C1117 1-100-567-81 CERAMIC CHIP 0.01uF 10% 25V C1118 1-100-909-11 CERAMIC CHIP 10uF 10% 6.3V C1119 1-100-916-11 CERAMIC CHIP 0.1uF 10% 16V C1203 1-100-916-11 CERAMIC CHIP 0.1uF 10% 16V

C1208 1-100-916-11 CERAMIC CHIP 0.1uF 10% 16V C1209 1-100-916-11 CERAMIC CHIP 0.1uF 10% 16V C1210 1-100-916-11 CERAMIC CHIP 0.1uF 10% 16V C1215 1-128-993-21 ELECT CHIP 22uF 20% 10V C1222 1-100-905-11 CERAMIC CHIP 0.001uF 10% 50V

C1223 1-100-916-11 CERAMIC CHIP 0.1uF 10% 16V

C1224 1-100-905-11 CERAMIC CHIP 0.001uF 10% 50V C1231 1-100-916-11 CERAMIC CHIP 0.1uF 10% 16V C1233 1-128-993-21 ELECT CHIP 22uF 20% 10V C1245 1-100-916-11 CERAMIC CHIP 0.1uF 10% 16V

C1252 1-100-567-81 CERAMIC CHIP 0.01uF 10% 25V C1253 1-164-874-11 CERAMIC CHIP 100PF 5% 50V C1254 1-164-874-11 CERAMIC CHIP 100PF 5% 50V C1255 1-100-567-81 CERAMIC CHIP 0.01uF 10% 25V C1256 1-100-567-81 CERAMIC CHIP 0.01uF 10% 25V

C1257 1-164-874-11 CERAMIC CHIP 100PF 5% 50V C1258 1-164-874-11 CERAMIC CHIP 100PF 5% 50V C1259 1-112-717-91 CERAMIC CHIP 1uF 10% 6.3V C1261 1-100-905-11 CERAMIC CHIP 0.001uF 10% 50V C1262 1-100-905-11 CERAMIC CHIP 0.001uF 10% 50V

C1263 1-112-717-91 CERAMIC CHIP 1uF 10% 6.3V C1264 1-112-717-91 CERAMIC CHIP 1uF 10% 6.3V C1265 1-117-681-11 ELECT CHIP 100uF 20% 16V C1266 1-100-905-11 CERAMIC CHIP 0.001uF 10% 50V C1267 1-100-905-11 CERAMIC CHIP 0.001uF 10% 50V

C1268 1-112-717-91 CERAMIC CHIP 1uF 10% 6.3V C1271 1-100-905-11 CERAMIC CHIP 0.001uF 10% 50V C1272 1-117-681-11 ELECT CHIP 100uF 20% 16V C1273 1-100-905-11 CERAMIC CHIP 0.001uF 10% 50V C1279 1-100-905-11 CERAMIC CHIP 0.001uF 10% 50V

C1281 1-112-746-11 CERAMIC CHIP 4.7uF 10% 6.3V C1282 1-112-746-11 CERAMIC CHIP 4.7uF 10% 6.3V C1286 1-100-909-11 CERAMIC CHIP 10uF 10% 6.3V C1287 1-165-884-11 CERAMIC CHIP 2.2uF 10% 6.3V C1288 1-112-746-11 CERAMIC CHIP 4.7uF 10% 6.3V

C1289 1-164-849-11 CERAMIC CHIP 9PF 0.5PF 50V C1293 1-100-567-81 CERAMIC CHIP 0.01uF 10% 25V C1295 1-100-567-81 CERAMIC CHIP 0.01uF 10% 25V C1301 1-100-567-81 CERAMIC CHIP 0.01uF 10% 25V C1303 1-100-909-11 CERAMIC CHIP 10uF 10% 6.3V

C1305 1-100-905-11 CERAMIC CHIP 0.001uF 10% 50V C1310 1-100-905-11 CERAMIC CHIP 0.001uF 10% 50V C1311 1-100-567-81 CERAMIC CHIP 0.01uF 10% 25V C1314 1-100-567-81 CERAMIC CHIP 0.01uF 10% 25V C1315 1-112-746-11 CERAMIC CHIP 4.7uF 10% 6.3V


C1331 1-100-916-11 CERAMIC CHIP 0.1uF 10% 16V C1332 1-100-916-11 CERAMIC CHIP 0.1uF 10% 16V C1335 1-100-567-81 CERAMIC CHIP 0.01uF 10% 25V C1350 1-117-681-11 ELECT CHIP 100uF 20% 16V C1351 1-100-916-11 CERAMIC CHIP 0.1uF 10% 16V

C1353 1-100-567-81 CERAMIC CHIP 0.01uF 10% 25V C1356 1-107-819-11 CERAMIC CHIP 0.022uF 10% 16V C1359 1-100-916-11 CERAMIC CHIP 0.1uF 10% 16V C1361 1-112-717-91 CERAMIC CHIP 1uF 10% 6.3V C1369 1-112-746-11 CERAMIC CHIP 4.7uF 10% 6.3V

C1370 1-114-808-11 CERAMIC CHIP 0.033uF 10% 16V C1371 1-100-916-11 CERAMIC CHIP 0.1uF 10% 16V C1372 1-100-916-11 CERAMIC CHIP 0.1uF 10% 16V C1374 1-164-874-11 CERAMIC CHIP 100PF 5% 50V C1375 1-164-874-11 CERAMIC CHIP 100PF 5% 50V

C1376 1-100-909-11 CERAMIC CHIP 10uF 10% 6.3V

MB-127

10-10


BDP-S360

C1377 1-100-567-81 CERAMIC CHIP 0.01uF 10% 25V C1378 1-100-909-11 CERAMIC CHIP 10uF 10% 6.3V C1382 1-100-909-11 CERAMIC CHIP 10uF 10% 6.3V C1384 1-100-567-81 CERAMIC CHIP 0.01uF 10% 25V

C1385 1-100-567-81 CERAMIC CHIP 0.01uF 10% 25V C1386 1-114-411-21 CERAMIC CHIP 0.33uF 10% 6.3V C1387 1-114-411-21 CERAMIC CHIP 0.33uF 10% 6.3V C1389 1-119-923-11 CERAMIC CHIP 0.047uF 10% 10V C1393 1-100-567-81 CERAMIC CHIP 0.01uF 10% 25V

C1394 1-100-909-11 CERAMIC CHIP 10uF 10% 6.3V C1395 1-112-775-11 CERAMIC CHIP 0.0022uF 10% 50V C1401 1-100-591-91 CERAMIC CHIP 1uF 10% 25V C1402 1-100-591-91 CERAMIC CHIP 1uF 10% 25V C1407 1-100-909-11 CERAMIC CHIP 10uF 10% 6.3V





C4226 1-100-905-11 CERAMIC CHIP 0.001uF 10% 50V C4227 1-112-717-91 CERAMIC CHIP 1uF 10% 6.3V C4228 1-100-909-11 CERAMIC CHIP 10uF 10% 6.3V C4230 1-100-916-11 CERAMIC CHIP 0.1uF 10% 16V C4235 1-100-905-11 CERAMIC CHIP 0.001uF 10% 50V

C4237 1-100-905-11 CERAMIC CHIP 0.001uF 10% 50V C4245 1-164-874-11 CERAMIC CHIP 100PF 5% 50V C4246 1-164-874-11 CERAMIC CHIP 100PF 5% 50V C4247 1-164-874-11 CERAMIC CHIP 100PF 5% 50V C4250 1-100-567-81 CERAMIC CHIP 0.01uF 10% 25V

C4252 1-100-916-11 CERAMIC CHIP 0.1uF 10% 16V C4253 1-114-214-81 CERAMIC CHIP 470PF 5% 50V C4262 1-100-567-81 CERAMIC CHIP 0.01uF 10% 25V C4263 1-100-567-81 CERAMIC CHIP 0.01uF 10% 25V C4264 1-100-567-81 CERAMIC CHIP 0.01uF 10% 25V



C4285 1-100-567-81 CERAMIC CHIP 0.01uF 10% 25V

C4286 1-100-567-81 CERAMIC CHIP 0.01uF 10% 25V C4287 1-112-717-91 CERAMIC CHIP 1uF 10% 6.3V C4292 1-100-567-81 CERAMIC CHIP 0.01uF 10% 25V C4293 1-100-567-81 CERAMIC CHIP 0.01uF 10% 25V

C4294 1-100-905-11 CERAMIC CHIP 0.001uF 10% 50V C4295 1-100-966-91 CERAMIC CHIP 10uF 20% 10V

< CONNECTOR >

CN301 1-816-587-21 PIN, CONNECTOR (PC BOARD) 15P CN602 1-573-768-21 PIN, CONNECTOR (1.5mm) (SMD) 5P CN702 1-820-735-31 HDMI CONNECTOR (HDMI OUT)

CN801 1-573-768-21 PIN, CONNECTOR (1.5mm) (SMD) 5P

CN902 1-573-806-21 PIN, CONNECTOR (1.5mm) (SMD) 6P CN1101 1-819-875-31 ETHERNET CONNECTOR (8P) (LAN (100)) CN1402 1-580-756-21 PIN, CONNECTOR (SMD) 7P CN1403 1-691-550-11 PIN, CONNECTOR (1.5mm) (SMD) 3P CN1404 1-820-116-51 CONNECTOR, FFC/FPC 17P

CN4201 1-794-343-51 CONNECTOR, FFC/FPC 18P CN4261 1-794-362-51 CONNECTOR, FFC/FPC 5P

< DIODE >

D301 8-719-081-67 DIODE M1FM3 D303 6-502-248-01 DIODE KDZTR3.9B D304 6-502-248-01 DIODE KDZTR3.9B D307 8-719-081-67 DIODE M1FM3 D308 6-501-724-01 DIODE MAZ8047G0LS0

D601 6-501-817-01 DIODE MA2J1110GLS0 D604 6-500-701-01 DIODE PGB1010603NR D605 6-500-701-01 DIODE PGB1010603NR D802 6-501-817-01 DIODE MA2J1110GLS0 D803 6-500-335-01 DIODE MC2838-T112-1

* D807 6-501-930-01 DIODE MAZW068HGLS0* D809 6-501-930-01 DIODE MAZW068HGLS0* D810 6-501-930-01 DIODE MAZW068HGLS0* D811 6-501-930-01 DIODE MAZW068HGLS0

< FERRITE BEAD >

FB101 1-400-794-21 EMI FERRITE (SMD) (1608) FB201 1-400-794-21 EMI FERRITE (SMD) (1608) FB301 1-400-794-21 EMI FERRITE (SMD) (1608) FB302 1-400-794-21 EMI FERRITE (SMD) (1608) FB303 1-400-794-21 EMI FERRITE (SMD) (1608)

FB401 1-400-794-21 EMI FERRITE (SMD) (1608) FB601 1-400-794-21 EMI FERRITE (SMD) (1608) FB1101 1-400-382-11 EMI FERRITE (SMD) (1608) FB1102 1-400-382-11 EMI FERRITE (SMD) (1608) FB1103 1-400-382-11 EMI FERRITE (SMD) (1608)

< FILTER >

FL303 1-234-986-11 FILTER, EMI REMOVAL (1608SMD) FL304 1-234-939-21 FILTER, EMI REMOVAL (SMD) FL305 1-234-939-21 FILTER, EMI REMOVAL (SMD) FL307 1-234-986-11 FILTER, EMI REMOVAL (1608SMD) FL308 1-234-986-11 FILTER, EMI REMOVAL (1608SMD)

< IC >

IC301 6-711-237-01 IC NJM2878F3-33 (TE2) IC302 6-711-050-01 IC S-1170B50UC-OUJTFG

MB-127

10-11


BDP-S360

IC304 6-705-337-01 IC TK11150CSCL-G IC502 6-710-563-01 IC K9F2G08U0A-PCBOT IC601 6-712-613-01 IC SI-3010KM-TLS

IC703 6-706-487-01 IC TC7SH08FU (T5RSOYJF) IC704 6-702-302-01 IC TK11133CSCL-G IC705 6-705-337-01 IC TK11150CSCL-G IC802 6-711-237-01 IC NJM2878F3-33 (TE2) IC804 6-702-630-01 IC AK4382AVTN-E2

IC805 6-711-237-01 IC NJM2878F3-33 (TE2) IC806 8-759-667-17 IC L79M05TLL-SONY-TL-E IC807 8-759-100-96 IC uPC4558G2 IC808 6-713-907-01 IC NJM2564BV (TE2) IC1101 6-712-663-11 IC LAN8700C-AEZG-CTI

IC1351 6-713-929-01 IC BD35630HFV-TR IC1401 6-708-762-01 IC PQ200WNA1ZPH IC1403 6-808-722-01 IC R5F212A7SNA18FP

< COIL >

L302 1-481-246-11 INDUCTOR 2.2uH L304 1-400-789-21 INDUCTOR 2.2uH L601 1-400-180-21 INDUCTOR, EMI FERRITE (1608) L602 1-400-180-21 INDUCTOR, EMI FERRITE (1608) L607 1-414-843-21 INDUCTOR 18nH

L608 1-414-843-21 INDUCTOR 18nH L609 1-457-223-11 COMMON MODE CHOKE COIL L705 1-457-374-21 COMMOM MODE CHOKE COIL L706 1-457-374-21 COMMOM MODE CHOKE COIL L707 1-457-374-21 COMMOM MODE CHOKE COIL

L708 1-457-374-21 COMMOM MODE CHOKE COIL L1287 1-400-789-21 INDUCTOR 2.2uH

< FUSE >

PS301 1-523-095-31 FUSE 3.15A 32V PS303 1-523-095-31 FUSE 3.15A 32V PS304 1-523-094-31 FUSE 2A 50V PS802 1-523-093-31 FUSE 0.5A 50V PS803 1-523-074-31 FUSE 1A 32V

PS804 1-523-074-31 FUSE 1A 32V

< TERMINAL >

PT001 1-694-802-21 CONTACT TERMINAL* PT002 1-694-592-21 TERMINAL* PT003 1-694-592-21 TERMINAL

< TRANSISTOR >

Q301 6-552-024-01 TRANSISTOR RRH070N03TB1 Q302 6-550-663-01 TRANSISTOR RSS100N03FD5TB Q303 6-552-024-01 TRANSISTOR RRH070N03TB1 Q304 6-550-663-01 TRANSISTOR RSS100N03FD5TB Q305 8-729-028-96 TRANSISTOR DTC114EUA-T106

Q306 6-551-456-01 TRANSISTOR RTR020P02TL Q307 6-551-690-01 TRANSISTOR RT3N11M-TP-1 Q308 6-551-690-01 TRANSISTOR RT3N11M-TP-1 Q309 8-729-028-96 TRANSISTOR DTC114EUA-T106 Q702 6-551-714-01 TRANSISTOR INK0001AC1-T112A-1

Q801 8-729-620-07 TRANSISTOR 2SC3052EF-T1-LEF Q805 8-729-028-73 TRANSISTOR DTA114EUA-T106 Q806 8-729-029-14 TRANSISTOR DTC144EUA-T106 Q809 8-729-620-07 TRANSISTOR 2SC3052EF-T1-LEF Q812 6-551-696-01 TRANSISTOR ISA1235AC1TP-1EF

Q813 8-729-028-83 TRANSISTOR DTA124EUA-T106 Q1408 6-551-690-01 TRANSISTOR RT3N11M-TP-1

< RESISTOR >

R103 1-208-683-11 METAL CHIP 1K 0.5% 1/16W R104 1-208-683-11 METAL CHIP 1K 0.5% 1/16W R108 1-218-943-11 METAL CHIP 150 5% 1/16W R109 1-218-943-11 METAL CHIP 150 5% 1/16W R110 1-218-943-11 METAL CHIP 150 5% 1/16W

R111 1-218-943-11 METAL CHIP 150 5% 1/16W R115 1-218-929-11 METAL CHIP 10 5% 1/16W R116 1-218-929-11 METAL CHIP 10 5% 1/16W R117 1-218-929-11 METAL CHIP 10 5% 1/16W R118 1-218-929-11 METAL CHIP 10 5% 1/16W

R121 1-218-941-81 METAL CHIP 100 5% 1/16W R123 1-208-683-11 METAL CHIP 1K 0.5% 1/16W R124 1-208-683-11 METAL CHIP 1K 0.5% 1/16W R125 1-218-941-81 METAL CHIP 100 5% 1/16W R127 1-208-683-11 METAL CHIP 1K 0.5% 1/16W

R128 1-208-683-11 METAL CHIP 1K 0.5% 1/16W R203 1-208-683-11 METAL CHIP 1K 0.5% 1/16W R204 1-208-683-11 METAL CHIP 1K 0.5% 1/16W R207 1-208-663-11 METAL CHIP 150 0.5% 1/16W R208 1-208-663-11 METAL CHIP 150 0.5% 1/16W


R218 1-218-929-11 METAL CHIP 10 5% 1/16W R219 1-218-929-11 METAL CHIP 10 5% 1/16W R220 1-218-929-11 METAL CHIP 10 5% 1/16W R223 1-218-941-81 METAL CHIP 100 5% 1/16W R225 1-208-683-11 METAL CHIP 1K 0.5% 1/16W

R226 1-208-683-11 METAL CHIP 1K 0.5% 1/16W R227 1-218-941-81 METAL CHIP 100 5% 1/16W R229 1-208-683-11 METAL CHIP 1K 0.5% 1/16W R230 1-208-683-11 METAL CHIP 1K 0.5% 1/16W R301 1-218-953-11 METAL CHIP 1K 5% 1/16W

R303 1-218-953-11 METAL CHIP 1K 5% 1/16W R304 1-218-953-11 METAL CHIP 1K 5% 1/16W R305 1-218-953-11 METAL CHIP 1K 5% 1/16W R309 1-218-953-11 METAL CHIP 1K 5% 1/16W R312 1-218-973-11 METAL CHIP 47K 5% 1/16W

R314 1-218-953-11 METAL CHIP 1K 5% 1/16W R315 1-208-697-11 METAL CHIP 3.9K 0.5% 1/16W R316 1-208-687-11 METAL CHIP 1.5K 0.5% 1/16W R317 1-208-711-11 METAL CHIP 15K 0.5% 1/16W R318 1-208-909-11 METAL CHIP 8.2K 0.5% 1/16W

R319 1-208-939-11 METAL CHIP 150K 0.5% 1/16W R320 1-218-947-11 METAL CHIP 330 5% 1/16W R321 1-218-973-11 METAL CHIP 47K 5% 1/16W R322 1-208-939-11 METAL CHIP 150K 0.5% 1/16W R323 1-208-703-11 METAL CHIP 6.8K 0.5% 1/16W

R324 1-218-929-11 METAL CHIP 10 5% 1/16W R325 1-208-683-11 METAL CHIP 1K 0.5% 1/16W R331 1-208-911-11 METAL CHIP 10K 0.5% 1/16W R334 1-208-911-11 METAL CHIP 10K 0.5% 1/16W R338 1-218-953-11 METAL CHIP 1K 5% 1/16W

MB-127

10-12


BDP-S360

R339 1-218-970-11 METAL CHIP 27K 5% 1/16W R345 1-218-947-11 METAL CHIP 330 5% 1/16W R349 1-208-695-11 METAL CHIP 3.3K 0.5% 1/16W R352 1-218-953-11 METAL CHIP 1K 5% 1/16W R353 1-208-671-11 METAL CHIP 330 0.5% 1/16W

R355 1-208-911-11 METAL CHIP 10K 0.5% 1/16W R356 1-216-815-11 METAL CHIP 330 5% 1/10W R357 1-218-953-11 METAL CHIP 1K 5% 1/16W R363 1-216-815-11 METAL CHIP 330 5% 1/10W R364 1-216-815-11 METAL CHIP 330 5% 1/10W

R365 1-218-953-11 METAL CHIP 1K 5% 1/16W R369 1-218-965-11 METAL CHIP 10K 5% 1/16W R370 1-218-953-11 METAL CHIP 1K 5% 1/16W R371 1-218-951-11 METAL CHIP 680 5% 1/16W R372 1-218-977-11 METAL CHIP 100K 5% 1/16W

R373 1-218-977-11 METAL CHIP 100K 5% 1/16W R374 1-218-951-11 METAL CHIP 680 5% 1/16W R405 1-218-947-11 METAL CHIP 330 5% 1/16W R407 1-218-933-11 METAL CHIP 22 5% 1/16W R409 1-218-945-11 METAL CHIP 220 5% 1/16W


R517 1-218-935-11 METAL CHIP 33 5% 1/16W R519 1-218-959-11 METAL CHIP 3.3K 5% 1/16W R523 1-218-941-81 METAL CHIP 100 5% 1/16W R525 1-218-965-11 METAL CHIP 10K 5% 1/16W R526 1-218-965-11 METAL CHIP 10K 5% 1/16W



R566 1-218-965-11 METAL CHIP 10K 5% 1/16W R601 1-218-936-11 METAL CHIP 39 5% 1/16W R602 1-218-936-11 METAL CHIP 39 5% 1/16W R603 1-208-688-11 METAL CHIP 1.6K 0.5% 1/16W R604 1-218-936-11 METAL CHIP 39 5% 1/16W

R605 1-218-936-11 METAL CHIP 39 5% 1/16W R606 1-218-965-11 METAL CHIP 10K 5% 1/16W R607 1-218-965-11 METAL CHIP 10K 5% 1/16W R609 1-218-952-11 METAL CHIP 820 5% 1/16W R610 1-218-967-11 METAL CHIP 15K 5% 1/16W

R611 1-218-967-11 METAL CHIP 15K 5% 1/16W R615 1-218-965-11 METAL CHIP 10K 5% 1/16W R616 1-208-691-11 METAL CHIP 2.2K 0.5% 1/16W R617 1-208-721-11 METAL CHIP 39K 0.5% 1/16W R618 1-208-911-11 METAL CHIP 10K 0.5% 1/16W

R621 1-218-990-81 SHORT CHIP 0 R630 1-216-833-11 METAL CHIP 10K 5% 1/10W R631 1-218-967-11 METAL CHIP 15K 5% 1/16W R632 1-218-967-11 METAL CHIP 15K 5% 1/16W R635 1-218-941-81 METAL CHIP 100 5% 1/16W

R637 1-218-990-81 SHORT CHIP 0 R639 1-216-295-91 SHORT CHIP 0 R711 1-218-865-11 METAL CHIP 5.6K 0.5% 1/10W R712 1-218-841-11 METAL CHIP 560 0.5% 1/10W R723 1-218-967-11 METAL CHIP 15K 5% 1/16W

R724 1-218-959-11 METAL CHIP 3.3K 5% 1/16W R725 1-218-959-11 METAL CHIP 3.3K 5% 1/16W R728 1-218-973-11 METAL CHIP 47K 5% 1/16W R729 1-218-961-11 METAL CHIP 4.7K 5% 1/16W R730 1-218-959-11 METAL CHIP 3.3K 5% 1/16W

R732 1-218-967-11 METAL CHIP 15K 5% 1/16W R733 1-218-956-11 METAL CHIP 1.8K 5% 1/16W R734 1-218-956-11 METAL CHIP 1.8K 5% 1/16W R737 1-216-864-11 SHORT CHIP 0 R738 1-216-864-11 SHORT CHIP 0

R739 1-216-864-11 SHORT CHIP 0 R740 1-216-864-11 SHORT CHIP 0 R741 1-216-864-11 SHORT CHIP 0 R801 1-218-965-11 METAL CHIP 10K 5% 1/16W R802 1-218-953-11 METAL CHIP 1K 5% 1/16W

R803 1-218-953-11 METAL CHIP 1K 5% 1/16W R804 1-218-953-11 METAL CHIP 1K 5% 1/16W R805 1-218-937-11 METAL CHIP 47 5% 1/16W R806 1-218-937-11 METAL CHIP 47 5% 1/16W R807 1-218-937-11 METAL CHIP 47 5% 1/16W


R817 1-218-945-11 METAL CHIP 220 5% 1/16W R818 1-218-939-11 METAL CHIP 68 5% 1/16W R819 1-208-663-11 METAL CHIP 150 0.5% 1/16W R820 1-208-663-11 METAL CHIP 150 0.5% 1/16W R821 1-208-883-81 METAL CHIP 680 0.5% 1/16W

R822 1-208-663-11 METAL CHIP 150 0.5% 1/16W R823 1-208-663-11 METAL CHIP 150 0.5% 1/16W R824 1-208-663-11 METAL CHIP 150 0.5% 1/16W R825 1-208-675-11 METAL CHIP 470 0.5% 1/16W R826 1-218-965-11 METAL CHIP 10K 5% 1/16W

R827 1-208-691-11 METAL CHIP 2.2K 0.5% 1/16W R828 1-208-691-11 METAL CHIP 2.2K 0.5% 1/16W R829 1-208-695-11 METAL CHIP 3.3K 0.5% 1/16W R830 1-208-695-11 METAL CHIP 3.3K 0.5% 1/16W R844 1-218-965-11 METAL CHIP 10K 5% 1/16W

R845 1-218-965-11 METAL CHIP 10K 5% 1/16W R846 1-218-965-11 METAL CHIP 10K 5% 1/16W R847 1-218-965-11 METAL CHIP 10K 5% 1/16W R864 1-218-939-11 METAL CHIP 68 5% 1/16W R865 1-218-939-11 METAL CHIP 68 5% 1/16W

R866 1-218-939-11 METAL CHIP 68 5% 1/16W R867 1-218-939-11 METAL CHIP 68 5% 1/16W R868 1-218-941-81 METAL CHIP 100 5% 1/16W R873 1-218-953-11 METAL CHIP 1K 5% 1/16W R877 1-218-961-11 METAL CHIP 4.7K 5% 1/16W

R878 1-218-965-11 METAL CHIP 10K 5% 1/16W R879 1-218-965-11 METAL CHIP 10K 5% 1/16W R881 1-216-830-11 METAL CHIP 5.6K 5% 1/10W R882 1-218-949-11 METAL CHIP 470 5% 1/16W R883 1-218-953-11 METAL CHIP 1K 5% 1/16W

MB-127

10-13


BDP-S360

R884 1-216-830-11 METAL CHIP 5.6K 5% 1/10W R885 1-218-965-11 METAL CHIP 10K 5% 1/16W R888 1-218-973-11 METAL CHIP 47K 5% 1/16W R889 1-218-977-11 METAL CHIP 100K 5% 1/16W R893 1-218-965-11 METAL CHIP 10K 5% 1/16W

R895 1-218-965-11 METAL CHIP 10K 5% 1/16W R896 1-208-700-11 METAL CHIP 5.1K 0.5% 1/16W R897 1-208-700-11 METAL CHIP 5.1K 0.5% 1/16W R898 1-208-700-11 METAL CHIP 5.1K 0.5% 1/16W R899 1-208-700-11 METAL CHIP 5.1K 0.5% 1/16W

R919 1-218-990-81 SHORT CHIP 0 R921 1-218-965-11 METAL CHIP 10K 5% 1/16W R922 1-218-965-11 METAL CHIP 10K 5% 1/16W R923 1-218-965-11 METAL CHIP 10K 5% 1/16W R926 1-218-933-11 METAL CHIP 22 5% 1/16W

R927 1-218-933-11 METAL CHIP 22 5% 1/16W R928 1-218-933-11 METAL CHIP 22 5% 1/16W R930 1-218-965-11 METAL CHIP 10K 5% 1/16W R933 1-218-965-11 METAL CHIP 10K 5% 1/16W R934 1-218-933-11 METAL CHIP 22 5% 1/16W

R935 1-218-933-11 METAL CHIP 22 5% 1/16W R936 1-218-965-11 METAL CHIP 10K 5% 1/16W R937 1-218-933-11 METAL CHIP 22 5% 1/16W R938 1-218-965-11 METAL CHIP 10K 5% 1/16W R940 1-218-965-11 METAL CHIP 10K 5% 1/16W

R941 1-218-965-11 METAL CHIP 10K 5% 1/16W R942 1-218-965-11 METAL CHIP 10K 5% 1/16W R948 1-218-965-11 METAL CHIP 10K 5% 1/16W R953 1-218-941-81 METAL CHIP 100 5% 1/16W R960 1-218-965-11 METAL CHIP 10K 5% 1/16W

R962 1-218-933-11 METAL CHIP 22 5% 1/16W R963 1-218-933-11 METAL CHIP 22 5% 1/16W R977 1-218-965-11 METAL CHIP 10K 5% 1/16W R978 1-218-965-11 METAL CHIP 10K 5% 1/16W R1101 1-218-929-11 METAL CHIP 10 5% 1/16W

R1102 1-208-692-11 METAL CHIP 2.4K 0.5% 1/16W R1103 1-245-567-81 METAL CHIP 49.9 0.5% 1/16W R1104 1-208-911-11 METAL CHIP 10K 0.5% 1/16W R1105 1-245-567-81 METAL CHIP 49.9 0.5% 1/16W R1106 1-245-567-81 METAL CHIP 49.9 0.5% 1/16W

R1107 1-245-567-81 METAL CHIP 49.9 0.5% 1/16W R1108 1-218-965-11 METAL CHIP 10K 5% 1/16W R1110 1-218-965-11 METAL CHIP 10K 5% 1/16W R1113 1-218-965-11 METAL CHIP 10K 5% 1/16W R1118 1-218-965-11 METAL CHIP 10K 5% 1/16W

R1119 1-218-941-81 METAL CHIP 100 5% 1/16W R1123 1-218-965-11 METAL CHIP 10K 5% 1/16W R1124 1-218-990-81 SHORT CHIP 0 R1128 1-218-990-81 SHORT CHIP 0 R1133 1-218-965-11 METAL CHIP 10K 5% 1/16W

R1134 1-218-965-11 METAL CHIP 10K 5% 1/16W R1135 1-218-965-11 METAL CHIP 10K 5% 1/16W R1137 1-218-937-11 METAL CHIP 47 5% 1/16W R1138 1-218-937-11 METAL CHIP 47 5% 1/16W R1139 1-218-937-11 METAL CHIP 47 5% 1/16W

R1141 1-218-955-11 METAL CHIP 1.5K 5% 1/16W R1142 1-218-955-11 METAL CHIP 1.5K 5% 1/16W R1208 1-218-965-11 METAL CHIP 10K 5% 1/16W R1209 1-218-957-11 METAL CHIP 2.2K 5% 1/16W R1210 1-218-957-11 METAL CHIP 2.2K 5% 1/16W


R1235 1-218-953-11 METAL CHIP 1K 5% 1/16W R1236 1-218-953-11 METAL CHIP 1K 5% 1/16W R1237 1-218-953-11 METAL CHIP 1K 5% 1/16W R1258 1-218-929-11 METAL CHIP 10 5% 1/16W R1259 1-218-933-11 METAL CHIP 22 5% 1/16W

R1261 1-218-965-11 METAL CHIP 10K 5% 1/16W R1263 1-218-965-11 METAL CHIP 10K 5% 1/16W R1271 1-216-825-11 METAL CHIP 2.2K 5% 1/10W R1272 1-216-825-11 METAL CHIP 2.2K 5% 1/10W R1284 1-218-953-11 METAL CHIP 1K 5% 1/16W

R1287 1-208-941-11 METAL CHIP 180K 0.5% 1/16W R1289 1-218-978-11 METAL CHIP 120K 5% 1/16W R1301 1-208-911-11 METAL CHIP 10K 0.5% 1/16W R1302 1-208-711-11 METAL CHIP 15K 0.5% 1/16W R1303 1-218-961-11 METAL CHIP 4.7K 5% 1/16W

R1305 1-218-929-11 METAL CHIP 10 5% 1/16W R1308 1-208-911-11 METAL CHIP 10K 0.5% 1/16W R1309 1-218-990-81 SHORT CHIP 0 R1310 1-218-957-11 METAL CHIP 2.2K 5% 1/16W R1311 1-218-961-11 METAL CHIP 4.7K 5% 1/16W

R1335 1-218-953-11 METAL CHIP 1K 5% 1/16W R1354 1-208-943-11 METAL CHIP 220K 0.5% 1/16W R1355 1-218-970-11 METAL CHIP 27K 5% 1/16W R1356 1-218-953-11 METAL CHIP 1K 5% 1/16W R1358 1-208-931-11 METAL CHIP 68K 0.5% 1/16W

R1359 1-208-939-11 METAL CHIP 150K 0.5% 1/16W R1362 1-208-702-11 METAL CHIP 6.2K 0.5% 1/16W R1402 1-208-905-11 METAL CHIP 5.6K 0.5% 1/16W R1403 1-208-894-81 METAL CHIP 2K 0.5% 1/16W R1404 1-208-883-81 METAL CHIP 680 0.5% 1/16W

R1405 1-208-677-11 METAL CHIP 560 0.5% 1/16W R1406 1-218-970-11 METAL CHIP 27K 5% 1/16W R1407 1-218-961-11 METAL CHIP 4.7K 5% 1/16W R1408 1-218-981-91 METAL CHIP 220K 5% 1/16W R1409 1-218-969-11 METAL CHIP 22K 5% 1/16W

R1410 1-218-953-11 METAL CHIP 1K 5% 1/16W R1412 1-218-941-81 METAL CHIP 100 5% 1/16W R1413 1-218-941-81 METAL CHIP 100 5% 1/16W R1414 1-218-941-81 METAL CHIP 100 5% 1/16W R1417 1-218-941-81 METAL CHIP 100 5% 1/16W

R1418 1-218-941-81 METAL CHIP 100 5% 1/16W R1419 1-218-959-11 METAL CHIP 3.3K 5% 1/16W R1420 1-218-977-11 METAL CHIP 100K 5% 1/16W R1421 1-218-941-81 METAL CHIP 100 5% 1/16W R1422 1-218-977-11 METAL CHIP 100K 5% 1/16W


R1442 1-218-965-11 METAL CHIP 10K 5% 1/16W R1443 1-218-977-11 METAL CHIP 100K 5% 1/16W R1445 1-218-977-11 METAL CHIP 100K 5% 1/16W R1446 1-218-941-81 METAL CHIP 100 5% 1/16W R1448 1-218-958-11 METAL CHIP 2.7K 5% 1/16W

MB-127

10-14


BDP-S360

R1450 1-218-941-81 METAL CHIP 100 5% 1/16W R1456 1-218-941-81 METAL CHIP 100 5% 1/16W R1459 1-218-965-11 METAL CHIP 10K 5% 1/16W R1462 1-218-977-11 METAL CHIP 100K 5% 1/16W R1464 1-218-977-11 METAL CHIP 100K 5% 1/16W


R4217 1-218-949-11 METAL CHIP 470 5% 1/16W R4218 1-218-949-11 METAL CHIP 470 5% 1/16W R4219 1-218-990-81 SHORT CHIP 0 R4222 1-218-971-11 METAL CHIP 33K 5% 1/16W R4223 1-218-971-11 METAL CHIP 33K 5% 1/16W

R4224 1-218-971-11 METAL CHIP 33K 5% 1/16W R4225 1-218-965-11 METAL CHIP 10K 5% 1/16W R4228 1-208-931-11 METAL CHIP 68K 0.5% 1/16W R4229 1-218-892-11 METAL CHIP 75K 0.5% 1/10W R4231 1-208-930-11 METAL CHIP 62K 0.5% 1/16W

R4232 1-208-930-11 METAL CHIP 62K 0.5% 1/16W R4255 1-218-961-11 METAL CHIP 4.7K 5% 1/16W R4258 1-218-965-11 METAL CHIP 10K 5% 1/16W R4259 1-218-965-11 METAL CHIP 10K 5% 1/16W R7040 1-218-965-11 METAL CHIP 10K 5% 1/16W

R7042 1-218-965-11 METAL CHIP 10K 5% 1/16W R8005 1-218-959-11 METAL CHIP 3.3K 5% 1/16W R8007 1-208-701-11 METAL CHIP 5.6K 0.5% 1/16W R8008 1-208-701-11 METAL CHIP 5.6K 0.5% 1/16W R8009 1-218-965-11 METAL CHIP 10K 5% 1/16W

R8010 1-208-663-11 METAL CHIP 150 0.5% 1/16W R8011 1-208-663-11 METAL CHIP 150 0.5% 1/16W R8019 1-208-663-11 METAL CHIP 150 0.5% 1/16W R8020 1-208-701-11 METAL CHIP 5.6K 0.5% 1/16W R8021 1-208-701-11 METAL CHIP 5.6K 0.5% 1/16W

R8022 1-208-663-11 METAL CHIP 150 0.5% 1/16W R8026 1-218-990-81 SHORT CHIP 0 R8029 1-218-949-11 METAL CHIP 470 5% 1/16W R8030 1-218-949-11 METAL CHIP 470 5% 1/16W R8031 1-218-973-11 METAL CHIP 47K 5% 1/16W

R8032 1-218-973-11 METAL CHIP 47K 5% 1/16W R8036 1-218-949-11 METAL CHIP 470 5% 1/16W R8037 1-218-949-11 METAL CHIP 470 5% 1/16W R8038 1-218-977-11 METAL CHIP 100K 5% 1/16W R8039 1-218-941-81 METAL CHIP 100 5% 1/16W

R8041 1-220-169-11 METAL CHIP 75 5% 1/16W R8042 1-220-169-11 METAL CHIP 75 5% 1/16W R8043 1-220-169-11 METAL CHIP 75 5% 1/16W R8045 1-220-169-11 METAL CHIP 75 5% 1/16W

< COMPOSITION CIRCUIT BLOCK >

RB101 1-234-706-21 RES, NETWORK 39 (1005X4) RB102 1-234-706-21 RES, NETWORK 39 (1005X4) RB103 1-234-706-21 RES, NETWORK 39 (1005X4) RB104 1-234-706-21 RES, NETWORK 39 (1005X4) RB105 1-234-706-21 RES, NETWORK 39 (1005X4)



RB508 1-234-370-21 RES, NETWORK 22 (1005X4) RB509 1-234-370-21 RES, NETWORK 22 (1005X4) RB510 1-234-378-21 RES, NETWORK 10K (1005X4) RB511 1-234-370-21 RES, NETWORK 22 (1005X4) RB512 1-234-370-21 RES, NETWORK 22 (1005X4)

RB513 1-234-370-21 RES, NETWORK 22 (1005X4) RB514 1-234-370-21 RES, NETWORK 22 (1005X4) RB522 1-234-378-21 RES, NETWORK 10K (1005X4) RB901 1-234-378-21 RES, NETWORK 10K (1005X4) RB902 1-234-378-21 RES, NETWORK 10K (1005X4)

RB903 1-234-378-21 RES, NETWORK 10K (1005X4) RB904 1-234-378-21 RES, NETWORK 10K (1005X4) RB905 1-234-375-21 RES, NETWORK 1K (1005X4) RB906 1-234-378-21 RES, NETWORK 10K (1005X4) RB1251 1-234-400-21 CONDUCTOR, NETWORK (1005X4)

RB1252 1-234-400-21 CONDUCTOR, NETWORK (1005X4) RB1253 1-234-370-21 RES, NETWORK 22 (1005X4) RB1254 1-234-370-21 RES, NETWORK 22 (1005X4) RB1255 1-234-370-21 RES, NETWORK 22 (1005X4) RB1256 1-234-370-21 RES, NETWORK 22 (1005X4)

RB1257 1-234-370-21 RES, NETWORK 22 (1005X4) RB1258 1-234-400-21 CONDUCTOR, NETWORK (1005X4) RB1259 1-234-400-21 CONDUCTOR, NETWORK (1005X4) RB1401 1-234-378-21 RES, NETWORK 10K (1005X4) RB1402 1-234-372-11 RES, NETWORK 100 (1005X4)

RB1403 1-234-372-11 RES, NETWORK 100 (1005X4) RB7007 1-234-378-21 RES, NETWORK 10K (1005X4) RB7008 1-234-378-21 RES, NETWORK 10K (1005X4) RB7010 1-234-378-21 RES, NETWORK 10K (1005X4) RB7011 1-234-378-21 RES, NETWORK 10K (1005X4)

RB7012 1-234-378-21 RES, NETWORK 10K (1005X4) RB7013 1-234-378-21 RES, NETWORK 10K (1005X4) RB7014 1-234-378-21 RES, NETWORK 10K (1005X4) RB7015 1-234-378-21 RES, NETWORK 10K (1005X4)

< THERMISTOR >

TH1401 1-804-949-11 THERMISTOR, NTC (SMD)

< VIBRATOR >

X1101 1-813-821-11 OSCILLATOR, CRYSTAL (50MHz)

A-1728605-A USB-014 BOARD, COMPLETE ***********************

< CONNECTOR >

CN362 1-566-760-11 PIN, CONNECTOR (PC BOARD) 5P

< VARISTOR >

VDR361 1-162-923-11 CERAMIC CHIP 47PF 5% 50V

MB-127 USB-014

10-15E


BDP-S360



MISCELLANEOUS PARTS ********************

53 1-836-486-11 CABLE, FLEXIBLE FLAT (FMF-003) 101 A-1728-551-A REGULATOR, SWITCHING (SRV2183WW) 154 1-836-504-11 CABLE, FLEXIBLE FLAT 155 8-820-424-02 DEVICE,OPTICAL KEM-430AAA/C2RP M1401 1-787-760-21 FAN, D.C.

Documents

BDP-S360 Ver 1.1(BR)