Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
High-quality and cost effective 2 channel audio monitors.
BCR-A1 OB analogue only.
BCR-A4-4 OB supports analogue and AES sources.
A reduced chassis depth of 200 mm makes the BCR range ideal for OB installations.
Analogue input and output levels can be independently adjusted.
Fully RoHS compliant.
Designed to exceed current EMC directives.
3 year warranty.
Four high quality magnetically screened speakers are used to provide high SPL audio reproduction with system limiting.
professional broadcast solutionsaudio/video monitors
broadcast delaysutility equipment
BCR-A1 OB: The Bel BCR-A1 OB is a low cost audio confidence monitor housed in a 1U rack enclosure.
Two analogue audio inputs can be monitored either as a stereo pair or as independent inputs. A stereo auxiliary input is provided on the front panel for convenience. Audio levels are shown on two PPM-scaled LED bargraphs. The audio source is available as a buffered line output on the rear panel as well as via the front panel headphone jack.
BCR-A4-4 OB: The Bel BCR-A4-4 OB is an analogue and digital multi-input audio confidence monitor housed in a 1U rack enclosure.
The pair of signals to be monitored may be selected from the unit’s 4 analogue and 4 AES inputs. Audio levels are displayed on two PPM-scaled LED bargraphs. The selected input signals are available as line outputs on the rear panel as well asvia the front panel headphone jack.
With a reduced chassis depth of 200 mm, the BCR OB series is ideal for OB installations as well as in machine-rooms, MCRs, radio broadcast suites, or anywhere where versatile two-channel audio monitoring is required.
BCR Series
FEATURES INTRODUCTION
[email protected] http://www.beldigital.com
In-Rack Monitoring
BCR Series Technical SpecificationsBCR-A1 OB
Analogue Input 1 pair balanced (XLR3F) audio inputs
Analogue Input Impedance 25kΩ differential
Auxillary Analogue Input 25kΩ single ended
Analogue Output 1 pair balanced (XLR3M) audio outputs for monitor
Analogue Output Impedance 50Ω differential
BCR-A4-4 OB
Analogue Input 4 pairs balanced (2 x 25 way D type) audio inputs
Analogue Input Impedance 25kΩ differential
Digital Input 4 pairs of AES3 digital inputs (4 x BNC)
Digital Input Impedance 75Ω unbalanced
Analogue Output 1pair balanced (XLR3M) audio outputs for monitor
Analogue Output Impedance 50Ω differential
General Audio
Peak Acoustic Level (@2ft) 100dB SPL
Hum and Noise More than 80dB below full output
Frequency Response 20 Hz to 20 kHz ±1dB (electrical)
Speakers 2 mid/treble and 2 bass
Level Meters 2 x 10 element LED bargraphs
General Other
Shielding Magnetic
IEC Connector Mains inlet, fuse and on/off switch
Power requirements 90 - 260 VAC 50/60Hz
Power consumption 30W Max
Dimensions 483w x 44.3h x 200d
Weight 4kg (8.8lbs)
OU
TPU
T
Mon
itor
BCR
A4/4
PIN
2
= C
H 1
LEF
T P
IN 1
4 =
GR
OU
ND
-
PIN
15
= C
H 1
RIG
HT+
PIN
16
= C
H 1
RIG
HT
PIN
3
= G
RO
UN
D-
AN
ALO
G IN
PUTS
1 - 4
PIN
1
= C
H 1
LEF
T+
DIGI
TAL
INPU
TS - A
ES3
43
21
OU
TPU
T
Mon
itor
BCR
A4/4
PIN
2
= C
H 1
LEF
T P
IN 1
4 =
GR
OU
ND
-
PIN
15
= C
H 1
RIG
HT+
PIN
16
= C
H 1
RIG
HT
PIN
3
= G
RO
UN
D-
AN
ALO
G IN
PUTS
1 - 4
PIN
1
= C
H 1
LEF
T+
DIGI
TAL
INPU
TS - A
ES3
43
21
Bel (Digital) Audio Ltd. 3 Horwood Court, Bletchley, Milton Keynes, MK1 1RD. United KingdomTel: +44 (0)1908 641 063 Fax: +44 (0)1908 645 985
Product specifications subject to change without prior notice. See website for warranty details.