Upload
others
View
7
Download
0
Embed Size (px)
Citation preview
Contents
EXPLORENT SURGICAL INSTRUMENTS
Antrum Irrigation Cannulas.......................................SIN-105
Antrum Rasps...........................................................SIN-110
Ostium Seekers,Bougies ....................................................................SIN-115
Needles, Elevators, Knives.......................................SIN-120
Antrum Curettes .......................................................SIN-125
Sinuscopy Trocars ...................................................SIN-130
Suction Tubes, Suction Elevator ..............................SIN-135
Retractors and Spatulas...........................................SIN-140
Biopsy Forceps for Nasal Mucosa ...........................SIN-145
Biopsy and Polyp Grasping Forceps .......................SIN-150
Suction Forceps .......................................................SIN-151
Antrum Grasping Forceps........................................SIN-155
Punch and Giraffe Forceps ......................................SIN-160
Nasal Forceps ..........................................................SIN-170SIN-171
Sinus Forceps for Microsurgical Operations............SIN-180
Through-Cutting Forceps.........................................SIN-185SIN-190
Antrum Punches.......................................................SIN-195SIN-196
Nasal Scissors..........................................................SIN-200
Circular Cutting Punches .........................................SIN-205
Sinus Punches .........................................................SIN-210SIN-215
Nasal and Sinus Specula .........................................SIN-220
Flexible Tension Arm System...................................SIN-225
Arm System..............................................................SIN-230
RICHARDS INSTRUMENTS
Curettes, Probes, Elevators, Knives.........................SIN-405
Forceps, Punches, Scissors.....................................SIN-410
Frontal Forceps ........................................................SIN-415SIN-420
Suction and Irrigation ...............................................SIN-425
7001Sinus Surgery, SIN-000
W7053720_4-07002
Antrum IrrigationCannulas
Models with long and short curved tubes
Models with malleable tubes
7003Sinus Surgery, SIN-105
V. Eicken Antrum Irrigation Cannulas
v. Eicken antrum cannula,
149602
15 cm,
Luer-lock,
long curved,
2.5 mm outer diameter
149603
149604
3 mm outer diameter
4 mm outer diameter
v. Eicken antrum cannula,
149612
15 cm,
Luer-lock,
short curved,
2.5 mm outer diameter
149613
149614
3 mm outer diameter
4 mm outer diameter
v. Eicken antrum cannula,
149702
15 cm,
Luer-lock,
malleable, long curved,
2.5 mm outer diameter
149703
149704
3 mm outer diameter
4 mm outer diameter
W7053720_4-07004
Antrum Rasps
Models with blunt and trocar tip
Frontal sinus rasps, strong and slender pattern
7005Sinus Surgery, SIN-110
Antrum and Frontal Sinus Rasps
508101 Wiener antrum punch,
diameter 6 mm,
curved,
with trocar tip,
19 cm
518110
518111
Wigand frontal sinus rasp,
strong pattern
slender pattern
508500 Watson-Williams antrum rasp,
23 cm,
blunt
W7053720_4-07006
Ostium Seekers,Bougies
S-shaped models
Double-ended models
7007Sinus Surgery, SIN-115
Frontal Sinus Ostium Seeker
518725 Frontal sinus ostium seeker,
double-ended,
curved
Ritter-Halle Frontal Sinus Bougie
507025
507030
Ritter-Halle frontal sinus bougie,
14.5 cm,
2.5 mm diameter
3 mm diameter
507040
507050
4 mm diameter
5 mm diameter
Maxillary Sinus Ostium Seeker
518619 Maxillary sinus ostium seeker,
double-ended,
19 cm,
ball sizes: 1.2 mm and 2 mm diameter
W7053720_4-07008
Needles, Elevators,Knives
Angular septum needle
Antrum trocar needle, with different diameters
Double-ended elevators. Micro elevators curved and angled.Suction elevator model
Fontanelle knife, paranasal sinus surgery, round and sickle knives:- Straight and bayonet shaped shaft- With blunt and pointed tip- Curved to left and curved to right
7009Sinus Surgery, SIN-120
Septum Needle
301100 Septum needle,
angled,
0.8 mm, Luer-lock
Lichtwitz Antrum Trocar Needles
Lichtwitz antrum trocar needle,
10 cm working length,
149315
149318
149320
1.5 mm outer diameter
1.8 mm outer diameter
2.0 mm outer diameter
Draf Micro Elevators
• Essentially facilitate duraplasty during endonasal surgery.
Draf micro elevator,
sharp, 25 cm length,
339001
339002
339003
15 cm working length,
1 mm width, slightly curved
3 mm width, slightly curved
3 mm width, strongly curved
339004 4 mm width, angled
Free Elevator
315000 Free elevator,
double-ended,
20 cm
Gornes Suction Elevator
405800 Gornes suction elevator,
with stylet,
3 mm tip, 19 cm
Moriyama Fontanelle Knife
326820 Moriyama fontanelle knife,
curved,
55 mm width,
round tip,
20 cm
Sickle Knives
Sickle knife,
518301
518302
518303
19 cm, double cutting,
tip pointed
tip rounded, blunt
sharp tip, curved to left
518304 sharp tip, curved to right
253600 Sickle knife,
pointed, 16 cm
Draf Knives
Draf sickle knife,
339101
339102
19 cm,
straight
bayonet
339201
339202
Draf round knife,
19 cm length,
1.5 mm diameter, straight
1.5 mm diameter, bayonet
339301
339302
2 mm diameter, straight
2 mm diameter, bayonet
Draf incision flap knife,
339401
339402
19 cm length,
straight
bayonet
W7053720_4-07010
Antrum Curettes
Antrum, frontal sinus curettes
Round, oval and oblong models
Double-ended, malleable models
7011Sinus Surgery, SIN-125
Coakley Antrum Curettes
Coakley antrum curette,
17 cm,
503001
503002
503003
7.5 mm width,
size 1 = oval, slightly curved
size 2 = oval, strong curved
size 3 = oval, retrograde curved
503006 size 6 = triangular, strong curved
503004
Coakley antrum curette,
17 cm,
6 mm width,
size 4 = oval, slightly curved
503005 size 5 = oval, strong curved
Faulkner Antrum Curette
504000 Faulkner antrum curette,
double-ended,
21 cm,
5.5–7.5 mm inner diameter
Halle Antrum Curette
506001
Halle antrum curette,
malleable,
21 cm,
size 1 = 8 x 5.5 mm
506002
506003
size 2 = 9 x 6 mm
size 3 = 10 x 7 mm
Antrum Curettes
518001
Antrum curette,
slightly curved,
19 cm, oval,
size 1 = 7 mm
518002
518003
size 2 = 8 mm
size 3 = 9 mm
518101 Antrum curette,
19 cm,
round, small size = 5 mm
Antrum curette,
518102
518103
19 cm,
oval, small size = 6 x 3 mm
oval, large size = 9 x 4 mm
Frontal sinus curette,
518104
518105
19 cm,
oval, small size = 3 mm,
55° curved
90° curved
518203
Antrum curette,
19 cm,
small size = 6.8 mm,
forward cutting
518204 backward cutting
W7053720_4-07012
Sinuscopy Trocars
For use with sinuscopes diameter 2.7 mm, 3.0 mm, 4.0 mm
Models with billshaped and oblique beak
7013Sinus Surgery, SIN-130
Sinuscopy Trocars
518503 Trocar and cannula for sinuscopy,
3.3 mm outer diameter,
7 cm cannula length,
oblique beak,
for use with 2.7 mm telescopes
518504 Trocar and cannula for sinuscopy,
4 mm outer diameter,
7 cm cannula length,
oblique beak,
for use with 3 mm telescopes
Trocar and cannula for sinuscopy,
518400
5 mm outer diameter,
8 cm cannula length,
for use with 4 mm telescopes,
billshaped beak
518500 oblique beak
W7053720_4-07014
Suction Tubes,Suction Elevator
Angled models with cut-off hole
Models with ball-ended tip
Models with closed blunt distal end and lateral holes
Suction elevator model
7015Sinus Surgery, SIN-135
Frazier Suction Tubes
Frazier suction tube,
210008
210010
9.5 cm working length,
with mandrin, stainless,
8 Fr.
10 Fr.
210012
210015
210018
210020
12 Fr.
15 Fr.
8 Fr., with olive tip
10 Fr., with olive tip
210022
210025
12 Fr., with olive tip
15 Fr., with olive tip
Frazier suction tube,
210016
210018
ball-ended,
10 cm working length,
6 Fr.
8 Fr.
210020 10 Fr.
Frazier suction tube,
211006
211008
graduated at 5–9 cm,
10 cm working length,
6 Fr.
8 Fr.
211010 10 Fr.
Frazier suction tube,
with cut-off hole,
with mandrin, Luer,
closed blunt distal end with holes,
15 cm working length,
350003
350004
3 mm
4 mm
Frazier suction tube,
350006
with cut-off hole,
with mandrin, Luer,
15 cm working length,
6 Fr.
350008
350010
350012
350015
8 Fr.
10 Fr.
12 Fr.
15 Fr.
Kahn-Frazier Frontal Sinus Suction Tubes
Kahn-Frazier frontal sinus suction tube,
10 Fr. malleable shaft,
cut-off hole,
13 cm working length,
211610
211710
size 1, slightly curved
size 2, strongly curved
Gorney Suction Elevator
405800 Gorney suction elevator,
with mandrin,
3 mm tip, 19 cm
W7053720_4-07016
Retractors andSpatulas
Orbital retractor, double ended
Standard retractor with grid handle
Flexible spatulas
7017Sinus Surgery, SIN-140
Retractors and Spatulas
500000 Hajek lip retractor,
tip 14 x 21 mm, serrated,
18 cm
502501
502502
Langenbeck retractor,
21 cm,
35 x 7 mm
35 x 10 mm
502503
502504
35 x 15 mm
60 x 20 mm
507100 Orbital retractor,
double-ended,
22 mm/26 mm width,
25 cm
507212
Spatula,
flexible,
20 cm,
12 mm width
507217 17 mm width
W7053720_4-07018
Biopsy Forceps for Nasal Mucosa
The “guillotine effect” forceps allow specimens with smoothcutting edges as well as adequate size (ca. 3 mm indiameter) and provide sufficient depth in the lamina propriawithout damaging the epithelium.
Repeated biopsies per patient require a quick and easilyperformable method, so that the procedure is as comfortableas possible for the patient.
The knife-sharp edge of the cutting cup hits the sharp edgeof the conical receptacle without putting tangential pressureonto the specimen.
The angle formed by the open forceps is even large enoughto biopsy a hypertrophic turbinate without any difficulties.
7019Sinus Surgery, SIN-145
Fokkens Biopsy Forceps
336000 Fokkens biopsy forceps,
straight,
8 cm working length,
cutting width 3 mm, round
336045 Fokkens biopsy forceps,
45° upcurved,
11 cm working length,
cutting width 3 mm, round
W7053720_4-07020
Biopsy and PolypGrasping Forceps
Models with straight and curved shafts
Models with round, oval cupped and pear-shaped jaws
7021Sinus Surgery, SIN-150
Biopsy and Grasping Forceps
515000 Biopsy and grasping forceps,
double-action jaws,
oval cupped,
2.5 mm jaws diameter,
1.5 mm shaft diameter,
15 cm working length
515070 Maxillary biopsy forceps,
double-action jaws,
oval cupped,
3 mm jaws diameter,
515110
shaft angled down 70°,
12 cm working length
Maxillary biopsy forceps,
double-action jaws,
oval cupped,
3 mm jaws diameter,
shaft angled down 110°,
11 cm working length
515005 Biopsy and grasping forceps,
double-action jaws,
oval cupped, opening vertically,
4 mm jaws diameter,
malleable shaft end,
18 cm working length
Biopsy and Grasping Forceps (cont.)
Biopsy forceps,
double-action jaws,
oval cupped,
335110
2.6 mm diameter,
110° backwards cutting,
18 cm,
opening horizontally
335111 opening vertically
Biopsy forceps,
double-action jaws,
oval cupped,
2.6 mm diameter,
70° backwards cutting,
19.5 cm,
335170
335171
opening horizontally
opening vertically
Biopsy forceps,
double-action jaws,
oval cupped,
4 mm diameter,
110° backwards cutting,
335114
335124
22 cm,
opening horizontally
opening vertically
Binner Polyp Grasping Forceps
Binner polyp grasping forceps,
335300
pear-shaped,
jaws 3 x 1.5 mm,
21 cm,
80° upturned, opening horizontally
335304
335301
335302
45° upturned, opening horizontally
80° upturned, shaft curved left
80° upturned, shaft curved right
W7053720_4-07022
Suction Forceps
Biopsy punches, nasal forceps
Through-cutting models
With integrated suction channel
Straight and upturned models
7023Sinus Surgery, SIN-151
Biopsy Suction Punches
Biopsy suction punch,
through-cutting, 2 mm cutting width,
335200
335201
10 cm working length,
with suction channel,
straight
45° upcurved
335204 15° upcurved
Biopsy suction punch,
through-cutting, 2.5 mm cutting width,
serrated upper jaw,
10 cm working length,
with suction channel,
338302
338312
detachable,
straight
45° upcurved
Blakesley Suction Forceps
Blakesley suction forceps,
straight,
4 mm diameter,
10 cm working length,
336800
336801
336802
with suction channel,
size 0 = 2.5 mm
size 1 = 3.5 mm
size 2 = 2.5 mm
Blakesley suction forceps,
45° upcurved,
4 mm diameter,
336900
336901
10 cm working length,
with suction channel,
size 0 = 2.5 mm
size 1 = 3.5 mm
336902 size 2 = 4 mm
Blakesley Suction Punches
Blakesley suction punch,
straight,
for biopsy and grasping,
337001
337002
11 cm working length,
with suction channel,
size 1 = 3.5 mm
size 2 = 4 mm
Blakesley suction punch,
45° upturned,
for biopsy and grasping,
337101
337102
11 cm working length,
with suction channel,
size 1 = 3.5 mm
size 2 = 4 mm
Takahashi Suction Punches
Takahashi suction punch,
straight,
for biopsy and grasping,
with suction channel,
338001
338002
4 mm shaft diameter,
10 cm working length,
size 1 = 3.5 mm
size 2 = 2.5 mm
Takahashi suction punch,
straight,
for biopsy and grasping,
338101
with suction channel,
4 mm shaft diameter,
10 cm working length,
size 1 = 3.5 mm
338102 size 1 = 2.5 mm
W7053720_4-07024
Antrum GraspingForceps
360° rotatable models
Retrograde opening jaws 120°
7025Sinus Surgery, SIN-155
Antrum Grasping Forceps
515510 Antrum grasping forceps,
360° rotatable,
finger post facilitates rotation,
retrograde opening jaws 120°,
10 cm working length
515500 Antrum grasping forceps,
for endonasal removal of cysts and polyps,
retrograde opening jaws 120°,
10 cm working length
W7053720_4-07026
Punch and Giraffe Forceps
Frontal Sinus Punch Forceps:through-cutting models with round cutting jaws
Giraffe forceps:models with round and oval cupped jaws
Double-action jaws
Models with vertical and horizontal opening jaws
Upturned shaft
7027Sinus Surgery, SIN-160
Frontal Sinus Punch Forceps
Through-cutting frontal sinus punch forceps,
double-action jaws,
cupped, 2 mm,
55° upturned,
14.5 cm working length,
336201
336202
opening vertically
opening horizontally
Through-cutting frontal sinus punch forceps,
double-action jaws,
cupped, 2 mm,
90° upturned,
14.5 cm working length,
336203
336204
opening vertically
opening horizontally
90° Giraffe Forceps
Giraffe forceps,
double-action jaws,
335405
cupped, 2 mm,
90° upturned,
22 cm,
opening vertically
335406 opening horizontally
Giraffe forceps,
double-action jaws,
335409
cupped, 4 mm,
90° upturned,
22 cm,
opening vertically
335410 opening horizontally
55° Giraffe Forceps
Giraffe forceps,
double-action jaws,
cupped, 2 mm,
55° upturned,
335403
335404
23 cm,
opening vertically
opening horizontally
Giraffe forceps,
double-action jaws,
cupped, 3 mm,
55° upturned,
335401
335402
23 cm,
opening vertically
opening horizontally
Giraffe forceps,
double-action jaws,
cupped, 4 mm,
55° upturned,
335413
335414
23 cm,
opening vertically
opening horizontally
W7053720_4-07028
Nasal Forceps
Standard nasal forceps, sharp
Straight and upcurved models
Models with basket
Models with 360° rotatable shaft
7029Sinus Surgery, SIN-170
Blakesley Antrum Forceps
Blakesley antrum forceps,
330500
9.5 x 4.5 mm,
tube shaft,
10 cm working length,
curved left
330600
Blakesley Nasal Forceps, Rotatable
curved right
Blakesley nasal forceps,
360° rotatable,
45° upturned,
330901
330902
11 cm working length,
size 1 = 6.5 x 3.5 mm
size 2 = 10 x 4 mm
Blakesley Nasal Forceps
330000
Blakesley nasal forceps,
straight,
11 cm working length,
size 0 = 3 mm
330001
330002
330003
size 1 = 3.5 mm
size 2 = 4 mm
size 3 = 5 mm
330100
Blakesley nasal forceps,
45° upcurved,
11 cm working length,
size 0 = 3 mm
330101
330102
330103
size 1 = 3.5 mm
size 2 = 4 mm
size 3 = 5 mm
330200
Blakesley nasal forceps,
90° upcurved,
11 cm working length,
size 0 = 3 mm
330201
330202
330203
size 1 = 3.5 mm
size 2 = 4 mm
size 3 = 5 mm
331501
Blakesley nasal forceps,
straight,
15 cm working length,
size 1 = 3.5 mm
331502
331503
size 2 = 4 mm
size 3 = 5 mm
Blakesley nasal forceps,
331601
331602
45° upcurved,
15 cm working length,
size 1 = 3.5 mm
size 2 = 4 mm
Blakesley nasal forceps,
90° upcurved,
15 cm working length,
331701
331702
size 1 = 3.5 mm
size 2 = 4 mm
W7053720_4-07030
Hartmann Nasal Cutting Forceps
Hartmann nasal cutting forceps,
straight shaft,
329001
329002
329003
11 cm working length,
size 1 = 5 mm diameter
size 2 = 7 mm diameter
size 3 = 9 mm diameter
329004
Struempel-Voss Nasal Forceps
size 4 = 10 mm diameter
330300 Struempel-Voss nasal forceps,
extra delicate, 2.5 mm,
45° upcurved,
Struempel Forceps
10 cm working length
Struempel forceps,
10 cm working length,
oval cup-shaped jaws,
341000
341045
341090
2.6 mm width,
straight
45° upcurved
90° upcurved
Struycken Nasal Cutting Forceps
327500 Struycken nasal cutting forceps,
11 cm working length
Takahashi Nasal Forceps
Takahashi nasal forceps,
spoon 3 x 10 mm,
11 cm working length,
327001
327002
straight
30° upturned
Wigand Polyp Grasping Forceps
330400 Wigand polyp grasping forceps,
spoon 6 x 14 mm,
round shaped,
60° upcurved,
11 cm working length,
Nasal Forceps(cont.)
7031Sinus Surgery, SIN-171
Draf Ethmoid Forceps
Draf ethmoid forceps,
very delicate,
338413
338416
2.4 mm width,
straight,
13 cm working length
16 cm working length
338419 19 cm working length
Draf ethmoid forceps,
very delicate,
338513
338516
2.4 mm width,
60° upcurved,
13 cm working length
16 cm working length
338519 19 cm working length
Draf ethmoid forceps,
very delicate,
338613
338616
2.4 mm width,
90° upcurved,
13 cm working length
16 cm working length
338619 19 cm working length
Draf ethmoid forceps,
very delicate,
338423
338426
oval cupped spoon 3 mm x 1.5 mm,
straight,
13 cm working length
16 cm working length
W7053720_4-07032
Sinus Forcepsfor Microsurgical Operations
Especially for endonasal endoscopic or microscopic microsurgical operations: Removal of polypoid diseasedmucous membranes, membrane remnants, lamellae of bone,septa and nasal polyps
Special curved and slender instruments with long shafts foreasier approach of the ostium and manipulation within themaxillary sinus. Facilitate the surgery of the agger-nasi, thefrontal recess and the ostium of the frontal sinus.
Delicate instruments for exact manipulation at anatomicallycritical places. Especially suitable for pre- and post-operativeday surgery.
Through-cutting, backbiter and oval cupped jaws models
7033Sinus Surgery, SIN-180
Complete Set of Moriyama Forceps
326800 Moriyama instrument set (not shown),
includes 15 forceps,
size 1–15 (326801–326815)
Moriyama Forceps Size 1–6
326801 Moriyama through-cutting forceps,
size 1 = 5 x 1.5 mm,
straight, delicate,
14 cm working length
326802 Moriyama through-cutting forceps,
size 2 = 5 x 1.5 mm,
straight shaft, upcutting, delicate,
326803
14 cm working length
Moriyama through-cutting forceps,
size 3 = 5 x 1.5 mm,
shaft upcurved, delicate,
14 cm working length
326804 Moriyama spoon forceps,
size 4 = 6.5 x 2.8 mm,
oval cups, straight shaft, delicate,
326805
14 cm working length
Moriyama spoon forceps,
size 5 = 5.5 x 3 mm,
straight shaft, oval cups, upwards, delicate,
14 cm working length
326806 Moriyama spoon forceps,
size 6 = 6.5 x 2.8 mm,
shaft upcurved, oval cups, upwards, delicate,
14 cm working length
Moriyama Forceps Size 7–15
326807 Moriyama backbiter,
through-cutting forceps,
size 7 = 2.7 mm cutting width,
326808
shaft upcurved, oval cups,
14 cm working length
Moriyama through-cutting forceps,
size 8 = 7.5 x 3 mm,
shaft upcurved,
14 cm working length
326809 Moriyama spoon forceps,
size 9 = 7.5 x 3 mm,
oval cups, upcurved shaft, delicate,
14 cm working length
Moriyama through-cutting forceps,
326810
326811
straight,
11.5 cm working length,
size 10, small size = 7 x 2.5 mm
size 11, large size = 7.5 x 3 mm
Moriyama through-cutting forceps,
straight shaft, upwards,
326812
326813
326814
11.5 cm, working length,
size 12, small size = 6 x 2 mm
size 13, medium size = 6 x 2.5 mm
size 14, large size = 7 x 3 mm
326815 Moriyama through-cutting forceps,
size 15 = 5 x 1.3 mm,
shaft and jaws upcurved, delicate,
14 cm working length,
W7053720_4-07034
Through-CuttingForceps
Sharp, strong curved cutting punches and forceps. Serve to remove or fenestrate bone partitions, excise cysts andpolyps.
Through-cutting models were modified that a rigid lower jawis used as a perforator while the mobile upper-jaw is thecutting part.
Super punch, upper jaw with serrated surface prevents softtissue or mucosa from slipping away.
Through-cutting models, standard type.
7035Sinus Surgery, SIN-185
Wigand Through-Cutting Forceps
Wigand universal forceps,
through-cutting,
334200
334245
14 cm working length,
size 3 x 4 mm,
straight
45° upcurved
Wigand “You see what you cut” Forceps
Wigand forceps,
through-cutting,
14 cm working length,
large size (2.5 x 11.5 mm),
334300
334345
straight
30° upcurved
Wigand forceps,
334400
through-cutting,
14 cm working length,
small size (2 x 6 mm),
straight
334445 30° upcurved
Super Punch Through-Cutting Forceps
The serrated surface of the upper jaw prevents soft tissue or
mucosa from slipping away.
Super punch,
336400
through-cutting,
serrated upper jaw, straight,
13 cm working length,
size 0, oval cutting width 2 mm
336401
336402
size 1, oval cutting width 2.5 mm
size 1, oval cutting width 3 mm
Super punch,
336500
through-cutting,
serrated upper jaw, upcurved,
13 cm working length,
size 0, oval cutting width 2 mm
336501
336502
size 1, oval cutting width 2.5 mm
size 2, oval cutting width 3 mm
Blakesley Through-Cutting Forceps
335800
Blakesley through-cutting forceps,
straight,
11 cm working length,
size 0 = 3 mm wide, cutting width 2 mm
335801
335802
size 1 = 3.5 mm wide, cutting width 2.5 mm
size 2 = 4 mm wide, cutting width 3 mm
Blakesley through-cutting forceps,
45° upcurved,
11 cm working length,
335900
335901
335902
size 0 = 3 mm wide, cutting width 2 mm
size 1 = 3.5 mm wide, cutting width 2.5 mm
size 2 = 4 mm wide, cutting width 3 mm
W7053720_4-07036
Draf Conchotome
338901 Draf conchotome,
through-cutting,
very delicate,
oval jaws, 3 mm x 1 mm,
14 cm working length, straight
Yoon Forceps
Yoon punch,
through-cutting,
336601
cutting width 2 x 6 mm, oval,
shaft 70° upcurved,
13 cm working length,
jaws opening sidewards to left
336602 jaws opening sidewards to right
Yoon fontanelle forceps,
through-cutting, horizontal opening,
cutting width 2.5 x 5 mm, oval,
336611
336612
13.5 cm working length,
left curved
right curved
Through-CuttingForceps
(cont.)
7037Sinus Surgery, SIN-190
W7053720_4-07038
Antrum Punches
Sidebiting models and backbiters
360° rotatable backbiters, micro backbiter
Backbiters with integrated suction channel
7039Sinus Surgery, SIN-195
Sidebiting Antrum Punches
Sidebiting antrum punch,
through-cutting,
3 mm cutting width,
334801
334802
13 cm working length,
forward cutting, down left
forward cutting, down right
Antrum Backbiters
Antrum punch,
10 cm working length,
adult size: 2.5 mm cutting width,
335000
335001
335002
backward cutting, up
backward cutting, left
backward cutting, right
Antrum punch,
10 cm working length,
pediatric size: 1.5 mm cutting width,
335020
335021
335022
backward cutting, up
backward cutting, left
backward cutting, right
Rotating Backbiters
The rotating system allows backward cutting to the left,
the right and upwards.
335011
“Rotating backbiter” antrum punch,
10 cm working length,
pediatric size: 1.5 mm cutting width
335010 adult size: 2.5 mm cutting width
335015
“Rotating backbiter” antrum punch,
finger post facilitates 360° rotation,
10 cm working length,
pediatric size: 1.5 mm cutting width
335025 adult size: 2.5 mm cutting width
335050 Tobey micro backbiter,
2 mm cutting width,
finger post facilitates 360° rotation,
10 cm working length,
shaft curved down
W7053720_4-07040
Pediatric Antrum Suction Backbiters
Antrum suction backbiter,
2 mm cutting width,
straight,
10 working length,
334900
334901
4 mm shaft diameter,
with integrated suction channel,
backward cutting, up
backward cutting, left
334902
334904
backward cutting, right
Antrum suction backbiter
2 mm cutting width,
curved up,
10 working length,
4 mm shaft diameter,
with integrated suction channel,
backward cutting, up
Antrum Suction Backbiters for Adults
Antrum suction backbiter,
2.5 cutting width,
10 cm working length,
335100
straight,
5 mm shaft diameter,
with integrated suction channel,
backward cutting, up
335101
335102
335104
backward cutting, left
backward cutting, right
Antrum suction backbiter (not shown)
2.5 cutting width,
10 cm working length,
curved up,
5 mm shaft diameter,
with integrated suction channel,
backward cutting, up
Antrum Punches(cont.)
7041Sinus Surgery, SIN-196
W7053720_4-07042
Nasal Scissors
Nasal scissors, concha and ethmoid scissors, standard type,sliding shaft and tubing shaft models
Serrated blade models
Smooth and very delicate models
7043Sinus Surgery, SIN-200
Nasal Scissors
Nasal scissors,
326200
326201
serrated blades,
13 cm working length,
straight
curved left
326202 curved right
Heymann Nasal Scissors
Heymann nasal scissors,
standard model,
326000
326100
326011
9 cm working length
9 cm working length, serrated blades
11 cm working length
Heymann nasal scissors,
326009
326101
smooth blades,
9 cm working length,
straight
curved left
326102 curved right
Draf Ethmoid Scissors
Draf ethmoid scissors,
338713
338716
very delicate,
4.5 mm jaws length,
straight, 13 cm working length
straight, 16 cm working length
338719
Belucci Scissors
straight, 19 cm working length
342000 Belucci scissors,
7 mm jaws length,
10 cm working length,
straight
W7053720_4-07044
Circular CuttingPunches
For enlargement of openings in the sphenoid frontal wall
Can be used to cut out pieces of the nasal concha, thin bonesegments, bony ethmoid septa
Useful for treatment of choanal atresia
Full circle of 360° cutting without rotating the instrument,models with integrated suction channel
By punching exclusively in the sagittal axis, there is areduced risk of traumatizing the cranium, the carotis and theoptic nerve osseous canal
The rigid inside cutting jaws prevent the removal of tissue ormucosa while cutting
7045Sinus Surgery, SIN-205
Circular Cutting Punches
Circular cutting punch,
334735
334745
cutting in a full circle of 360°,
16 cm working length,
3.5 mm diameter
4.5 mm diameter
334765 65° upturned, 3.5 mm diameter
Circular cutting punch,
cutting in a full circle of 360°,
18 cm working length,
334935
334945
3.5 mm diameter
4.5 mm diameter
Circular cutting punch,
334965
cutting in a full circle of 360°,
65° upturned,
17 cm working length,
3.5 mm diameter
334975 4.5 mm diameter
Circular Cutting Punches with Suction Channel
Circular cutting punch,
with integrated suction channel,
allows cutting in a full circle of 360° with
simultaneous suction,
334835
334845
16 cm working length,
3.5 mm diameter
4.5 mm diameter
W7053720_4-07046
Sinus Punches
Through-cutting models, backward cutting models with deposit to pick up and collectbone material
360° rotatable models, detachable models
Up- and downbiting models
Upturned models for frontal sinus
7047Sinus Surgery, SIN-210
Beyer Antrum Punches
Beyer antrum punch,
through-cutting,
2 mm cutting width,
512500
9 cm working length,
for endonasal fenestration,
for children,
cutting 90° up
512600
Frontal Sinus Punch
backward cutting
512603 Frontal sinus punch forceps,
shaft 70° upturned,
cutting width 3 mm,
forward cutting 40° up,
17.5 cm working length
Heermann Ethmoid Punch
512800 Heermann ethmoid punch,
backward cutting,
opening width 17 mm,
cutting width 2.5 mm
McKenty Sphenoid Punches
513100 McKenty sphenoid punch,
through-cutting,
slender pattern,
2 mm cutting width,
rotatable 360°,
14.5 cm working length
Sphenoid Punches
• With deposit to pick up and collect bone material.
• Enables to work continuously.
• Collected material can be removed using the mandrin.
512402
Bone punch,
through-cutting,
with mandrin,
18 cm working length, 2 mm cutting width
512403 15 cm working length, 3 mm cutting width
512410 Mandrin (not shown),
spare for 512402/-03
W7053720_4-07048
Kerrison Sphenoid Punches
• Detachable for reprocessing
FS-Kerrison sphenoid punch,
cutting up 90°,
512902
512903
18 cm working length,
2 mm cutting width
3 mm cutting width
512922
FS-Kerrison sphenoid punch,
cutting up 40°,
18 cm working length,
2 mm cutting width
512923
Hajek Sphenoid Punches
3 mm cutting width
Hajek sphenoid punch,
4 mm width,
14 cm working length,
512001
512002
512201
cutting up 90°
cutting down 90°
backward cutting, up 45°
Hajek-Kofler Sphenoid Punches
512202 Hajek-Kofler sphenoid punch,
backward cutting, down 45°
backward cutting, down 45°
cutting width 4 x 4 mm
Hajek-Kofler sphenoid punch,
forward cutting, up 45°,
512302
512301
14 cm working length,
cutting width 2 x 2 mm
cutting width 4 x 4 mm
513000 Hajer-Kofler sphenoid punch,
360° rotatable,
slender pattern,
17 cm working length
Sinus Punches(cont.)
7049Sinus Surgery, SIN-215
W7053720_4-07050
Nasal and Sinus Specula
Models with shortened, serrated blade and set-screw
Models for adults and children
7051Sinus Surgery, SIN-220
Hartmann Nasal Specula
143001 Hartmann nasal speculum,
large size,
13.5 cm,
for adults
143002 Hartmann nasal speculum,
small size,
13 cm,
for children
Sinus Specula
Sinus speculum,
shortened blade,
serrated,
with set screw,
497601
497602
length 15 cm,
adaption to flexible tension arm 218800,
left blade, 55 mm
right blade, 55 mm
497603
497604
497605
497606
left blade, 65 mm
right blade, 65 mm
left blade, 75 mm
right blade, 75 mm
Sinus speculum,
497801
blades without teeth,
with set screw,
adaption to flexible tension arm 218800,
left blade 55 mm, right blade 35 mm
497802
497803
497804
497805
right blade 55 mm, left blade 35 mm
left blade 75 mm, right blade 35 mm
right blade 75 mm, left blade 35 mm
left blade 75 mm, right blade 52 mm
497806 right blade 75 mm, left blade 52 mm
Sinus speculum “Wuerzburg”,
for children,
shortened blade,
serrated,
with set screw,
498001
498002
13 cm length,
adaption to flexible tension arm 218800,
left blade 25 mm, right blade 18 mm
right blade 25 mm, left blade 18 mm
W7053720_4-07052
Flexible Tension Arm System
Complete with holding rod for attachment to operating table
Optional clamp and adapter
7053Sinus Surgery, SIN-225
Flexible Tension Arm
218800 Flexible tension arm,
complete with holding rod
for attachment to operating table
218801 Rotation clamp,
for flexible tension arm 218800,
attachable to operating table
218803 Telescope clamp,
fitting to sinuscopes
218804 Adapter,
for flexible tension arm 218800,
for Cottle nasal specula with set screw
W7053720_4-07054
Arm System
Fast and stable fixing
Only one central set screw
Powerful holding force
Fully autoclavable
Universally applicable
7055Sinus Surgery, SIN-230
Arm System
218700 Flexible tension arm,
L-stand 470 x 170 mm,
18.5" x 6.7" with look
218705 Clamp socket,
for hinged arm support,
electrical isolated,
up to 4.5 KV AC for Rail 25/35 x 8/10 mm,
1/1.4 x 0.3/0.4"
Arm System (cont.)
218711 Adapter,
for retractor/laryngoscope,
to the support with look
218720 Adapter,
for retractor/optic/mouth gag,
to the support with look
W7053720_4-07056
NEPO
ESOLC
Curettes
230715 Antrum curette,
curved
70230757 Antrum curette,
70° angled,
1 pc.
Probes
230725 Probe,
double-ended
Ostium seeker probe,
stainless steel,
210 mm (8.3") overall length,
1 pc., non-sterile,
70230770
70230771
frontal ostium seeker
maxillary ostium seeker
Elevators
270202 Dunning elevator-curette,
double-ended,
185 mm (7.3") overall length,
ebony finish
550737 McCollough elevator,
round,
knurled handle,
double-ended,
190 mm (7.5") overall length
70231050 Suction elevator,
Ries,
210 mm (8.3") overall length
Needles
Septal needle (not shown),
230666
230667
230668
with Luer-lock,
straight
knee bent
bayonet
Curettes, Probes,Elevators, Knives
7057Sinus Surgery, SIN-
10 mm
7 m
m
6.5 mm
10 m
m
2 mm
7 m
m
1.5 mm
18 m
m
8 m
m
1.5 mm
1.2 mm
3 m
m3
mm
5 mm
10 mm
12 mm
2 m
m2.
3 m
m
22 mm
3 m
m
405
Reusable Knives
Sickle knife,
straight,
4 pcs.,
70130977
70130980
sharp
blunt
Synechia knife,
curved blade, sharp,
4 pcs.,
70130978
70130979
right
left
70130981 Rains maxillary ostium knife,
90° bend, double-edge,
4 pcs.
230580 Sickle knife,
blunt point,
190 mm (7.5") overall length,
straight blade
Sickle knife,
230582
230594
sharp point,
190 mm (7.5") overall length,
straight blade
30° left blade angle
230595 30° right blade angle
Single Use Knife
130801 Sickle knife,
for sinus endoscopy,
stainless steel,
sterile, single use,
6 pcs.
W7053720_4-07058
10 mm
10 mm
10 mm
10 mm
Takahashi Forceps
230676 Takahashi forceps,
straight, large,
100 mm shaft length
270155 Takahashi nasal forceps,
straight, cupped,
2.5 mm jaws width,
120 mm (4.7") shaft length,
ebony finish
Weil Blakesley Forceps
Weil Blakesly forceps,
230732
230733
2.5 mm jaws width,
curved right 30°
curved left 30°
Weil Blakesley Forceps (cont.)
230734
Weil Blakesly forceps,
3.6 mm jaws width,
curved right 30°
230708 upturned 90°, long
230706
230707
Weil Blakesly suction forceps,
3.6 mm jaws width,
upturned 90°, long
upturned 90°
230673
230674
Weil Blakesly forceps (not shown),
3.6 mm jaws width,
upturned
straight
Forceps, Punches,Scissors
7059Sinus Surgery, SIN-
5.5 mm
2.5 mm
5.5 mm
2.5 mm
10 mm
3.6 mm
20 m
m
3.6 mm
20 m
m
3.6 mm
3.6 mm
10 m
m
11.5 mm
5 m
m
10 mm
410
Punch
Punch,
circular cutting,
mushroom type,
76510555
76510556
1 pc.,
180 mm working length,
3.5 mm jaws width
4.5 mm jaws width
Backbiters
Medium backbiter (not shown),
230719
230721
straight
left
Scissors
Nasal scissors,
pediatric,
230877
230878
230879
100 mm shaft length,
straight
curved right
curved left
70230758 Nasal scissors,
pediatric,
45° upturned
W7053720_4-07060
4 mm
5 mm
5 mm
5 mm
3.5
mm
4.5
mm
Ostium Forceps
76510601 Ostium forceps,
stainless steel,
frontal, 70°, upturned shaft,
125 mm (5") working length,
small,
2 mm jaws width,
76510600
2.5 mm jaws length,
1 pc.
Ostium forceps,
stainless steel,
frontal, 70°, upturned shaft,
125 mm (5") working length,
standard,
3 mm jaws width,
3.5 mm jaws length,
1 pc.
76510604 Ostium forceps,
stainless steel,
frontal, 70°, upturned shaft,
125 mm (5") working length,
standard,
5 mm jaws width,
5.5 mm jaws length,
1 pc.
Giraffe Forceps
76510569 Giraffe forceps,
for polyps,
stainless steel,
80° upturned shaft,
115 mm (4.5") working length,
pear-shaped, cupped jaws,
5.8 mm jaws width,
6.5 mm jaws length,
matte finish,
1 pc.
Frontal Forceps
7061Sinus Surgery, SIN-
5.8 mm
6.5 mm
2.5 mm 2 mm
3.5 mm 3 mm
5.5 mm 5 mm
415
Giraffe Biopsy Forceps
Biopsy forceps,
double spoon, vertical,
stainless steel, matte finish,
70230744
70230745
70230746
1 pc.,
2.7 mm jaws width, 5 mm jaws length, 45° upturned
4 mm jaws width, 6.8 mm jaws length, 45° upturned
4 mm jaws width, 7 mm jaws length, 70° upturned
Biopsy forceps,
70230747
horizontal,
stainless steel, matte finish,
1 pc.,
2.7 mm jaws width, 5 mm jaws length, 45° upturned
70230748
70230749
4 mm jaws width, 6 mm jaws length, 45° upturned
4 mm jaws width, 6 mm jaws length, 70° upturned
Giraffe Biopsy Forceps (cont.)
Biopsy forceps,
horizontal, short,
stainless steel, matte finish,
70230750
70230751
70230752
1 pc.,
2.7 mm jaws width, 5 mm jaws length, 45° upturned
4 mm jaws width, 5 mm jaws length, 45° upturned
4 mm jaws width, 5 mm jaws length, 70° upturned
Biopsy forceps,
vertical, short,
stainless steel, matte finish,
1 pc.,
70230753
70230754
70230755
2.7 mm jaws width, 4 mm jaws length, 45° upturned
4 mm jaws width, 5 mm jaws length, 45° upturned
4 mm jaws width, 6 mm jaws length, 70° upturned
W7053720_4-07062
5 mm2.7 mm
6 mm4 mm
6 m
m
4 mm
5 mm4 mm
5 mm
4 mm
4 mm
2.7 mm
5 mm
4 mm
6 mm
4 mm
5 mm2.7 mm
5 mm
2.7 mm
6.8
mm
4 mm
7 mm
4 mm
Specialty Biopsy Forceps
230710
Biopsy forceps,
double spoon, for removal of delicate tissue,
70° upturned,
2 mm jaws width, 6 mm jaws length, horizontal
230711
230575
230712
2 mm jaws width, 5 mm jaws length, horizontal, short
2.8 mm jaws width, 5 mm jaws length, vertical
2 mm jaws width, 5 mm jaws length, vertical, short
Specialty Biopsy Forceps (cont.)
230578 Biopsy forceps,
double spoon,
for removal of delicate tissue,
100° upturned,
2 mm jaws width,
7 mm jaws length, horizontal
Frontal Forceps(cont.)
7063Sinus Surgery, SIN-
2 mm
6 mm
5 mm
2 mm
5 mm
2 mm
7 mm
2 mm
5 mm
2.8 mm
420
Punch Forceps
Punch forceps,
through-cutting, for dissection of delicate tissue,
230577
230713
230714
70° upturned,
2 mm jaws width, 6 mm jaws length, vertical
2 mm jaws width, 5 mm jaws length, horizontal
2 mm jaws width, 6 mm jaws length, horizontal, short
230593 2.5 mm jaws width, 7 mm jaws length, vertical, short
230592 Punch forceps,
through-cutting,
for dissection of delicate tissue,
straight,
2 mm jaws width,
4 mm jaws length
Weil Blakesley Forceps
Forceps,
through-cutting,
230726
230728
straight,
105 mm (4.1") shaft length,
2.5 mm jaws width, pediatric
3.6 mm jaws width
230730 4.8 mm jaws width
Forceps,
230727
through-cutting,
45° upturned,
95 mm (3.8") shaft length,
2.5 mm jaws width, pediatric
230729
230731
3.6 mm jaws width
4.8 mm jaws width
Forceps,
70230743
70230742
through-cutting,
curved left
curved right
W7053720_4-07064
2 mm
6 mm
5 mm
2 mm
6 mm
2 mm
7 mm
2.5 mm
4 mm
2 m
m
2.5 mm
5 mm
8 mm
3.6 mm
14 mm
4.8 mm
5.5 mm
2.5 mm
5.5 mm
3.6 mm
13 mm
4.8 mm
6.5 mm
3.6 mm
6.5 mm
3.6 mm
Weil Blakesley Forceps with Suction
Forceps with suction,
through-cutting,
straight,
105 mm (4.1") shaft length,
70230736
70230738
70230740
2.5 mm jaws width
3.6 mm jaws width
4.8 mm jaws width
Forceps,
through-cutting,
upturned,
70230737
70230739
70230741
95 mm (3.8") shaft length,
2.5 mm jaws width
3.6 mm jaws width
4.8 mm jaws width
Fergusson Frazier Suction Kit
130804 Fergusson Frazier suction kit,
sterile, single use,
6 units
Each unit includes:
6 Fr. (2 mm) suction tube,
9 Fr. (2.8 mm) suction tube,
11 Fr. (3.6 mm) suction tube,
handle with bypass
Fergusson Suction Tube
230875 Suction tube (not shown),
calibrated,
100 mm (3.9") working length,
160 mm (6.3") overall length,
with finger cut-off
With depth marking: Marks at 5–9 cm from tip.
Suction andIrrigation
7065Sinus Surgery, SIN-425
14 mm
4.8 mm
9 mm
3.6 mm
2.5 mm
2 mm
3.6 mm
8 mm
2.5 mm
5.5 mm
4.8 mm
8 mm
Post-Op Suction Tube
Suction tube (not shown),
14 gauge,
green finish,
70130987
70130995
4 pcs.,
curved left
frontal
Rains Malleable Irrigation
70131011 Irrigation tube,
stainless steel,
387 mm (15.2") overall length,
sterile, single use,
6 pcs.
W7053720_4-07066