9.10 hrs

2 pcs

f

0.15 mm

k

0.40 mm0.25 mm

h

1

45.00 g

d

MINI

Summary

Don't you hate the way most coasters don't catch the condensationcoming off your ice-cold drink? Well, this coaster is just what you need! Abeautiful coaster that will protect your coffee-table or desk while youwatch Battlestar Galactica. "All of this has happened before, and it will allhappen again."

Household > Living room

coaster bsg battlestargalactica battlestar

Note: The print-time shown here is double the actual time since you onlyneed to print one of the gCode files.

Filament changes are embedded in the gCode, so you don't have to worryabout catching it, it'll wait on you and then warm-up again after you switchthe filament. Start with Black filament, then switch to Gold after about 30minutes. Then, two and a half hours later, switch back to Black and let itfinish. I've uploaded gCode for both the 0.4mm nozzle and the 0.25mmnozzle. The 0.25mm nozzle code works for 0.3mm nozzles as well, you

Frankincell

BattlestarGalactica Coaster

VIEW IN BROWSER

updated 16. 2. 2020 | published 16. 2. 2020

Print Files (.gcode) DOWNLOAD ALL FILES

5.1 MB

2.94 hrs f 0.15 mm k 0.40 mm h PLA 22.70 g d MINI

updated 16. 2. 2020

7.5 MB

6.16 hrs f 0.15 mm k 0.25 mm h PLA 22.70 g d MINI

updated 16. 2. 2020

Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES

311.1 KBupdated 16. 2. 2020

1.1 MBupdated 16. 2. 2020

won't need to change anything. Both versions come out beautiful, but the0.25mm version has slightly sharper lettering.

Inspired by this coaster... https://www.thingiverse.com/thing:3270192 But Iliked the multi-level design of this wall decoration... https://www.thingiverse.com/thing:1532766 So, I used the wall decoration as mystarting point and created a high-wall ring around the outside.

License

This work is licensed under a Creative Commons (4.0 International License)

battlestar_galactica_coaster_015mm_pla_mini_2h5.gcode

battlestar_galactica_coaster_025n_015mm_pla_min.gcode

battlestar_galactica_coaster.3mf

battlestar_galactica_coaster.stl

Attribution—Noncommercial—Share Alike

✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✖ | Commercial Use ✖ | Free Cultural Works ✖ | Meets Open Definition