Nominal Basket Diameter

Nominal Impedance*

Power Rating**

Watts

Music Program

Resonance

Usable Frequency Range

Sensitivity***

Magnet Weight

Gap Height

Voice Coil Diameter

Specification

MaterialS of conStruction

MountinG inforMation

Recommended Enclosure Volume

Sealed

Vented

Driver Volume Displaced

Overall Diameter

Baffle Hole Diameter

Front Sealing Gasket

Rear Sealing Gasket

Mounting Holes Diameter

Mounting Holes B.C.D.

Depth

Net Weight

Shipping Weight

Fs

Re

Le

Qms

Qes

Qts

Vas

Vd

Cms

BL

Mms

EBP

Xmax

Sd

Xlim

tHiele & SMall paraMeterS*

Recommended for professional bass guitar applications in a sealed or vented enclosure.

LEGEND CB158

15”, 381 mm

8 Ω

300 W

600 W

34 Hz

47 Hz – 3 kHz

98.2 dB

80 oz.

0.375”, 9.5 mm

2.5”, 64 mm

34 Hz

6.15 Ω

0.33 mH

5.9

0.36

0.34

11.87 cu.ft., 336.1 liters

411 cc

0.31 mm/N

16 T-M

70 grams

95

4.8 mm

856.3 cm2

9.5 mm

54–65 liters,

1.9–2.3 cu.ft.

54–159 liters,

1.9–5.6 cu.ft.

0.138 cu.ft., 3.92 liters

15.22’’, 386.6 mm

13.99’’, 355.4 mm

Yes

Yes

0.28’’, 7.1 mm

14.56’’, 369.8 mm

6.5”, 165.1 mm

17.3 lbs , 7.85 kg

19.4 lbs , 8.8 kg

Copper voice coil

Polyimide former

Ferrite magnet

Vented and extended core

Die-cast aluminum basket

Paper cone

Cloth cone edge

Solid composition paper dust cap

Bass Guitar series

8 Ω FREQUENCY RESPONSE*

Higher Data = ScalarAve

Lower Data = Import: LoFreqCorr98.txt

Person: Company:

Project: File: LEGENDCB15.lib

Oct 31, 2013Thr 2:44 pm

4.6.0.371May/29/2007

Not

esM

ap

25: Spliced @ 265.0000 smoothed

20 Hz 50 100 200 500 1K 2K 5K 10K 20K

dBSPL

65

70

75

80

85

90

95

100

105 Ohm

78910

20

30

40

5060708090100

200SPL vs Freq

* Please consult www.eminence.com for specifications of models with alternative

impedances.

** Multiple units exceed published ratings evaluated under EIA 426A specification while

tested in a free-air, non-temperature-controlled environment.

*** The average output across the usable frequency range when applying 1W/1m into the

nominal impedance. i.e: 2.83V/8Ω, 4V/16Ω. Eminence response curves are measured

under the following conditions: All speakers are tested at 1W/1m using a variety of test

set-ups for the appropriate impedance | LMS using 0.25" supplied microphone (software

calibrated) mounted 1m from wall/baffle | 2 ft. x 2 ft. baffle is built into the wall with

the speaker mounted flush against a steel ring for minimum diffraction | Carver PM-120

amplifier | 2700 cu. ft. chamber with fiberglass on all six surfaces (three with custom-

made wedges).

**** BETA 8CX, 10CX, and 12CX are coaxial speakers with tweeter sold separately. Published

usable frequency response contingent upon use of ASD:1001 HF Driver.

***** Multiple units exceeded published ratings evaluated under EIA-426A or AES specification

while mounted on Eminence’s H290, H290S, or H2EA horn in a non-temperature-

controlled environment.

******The average on axis output across the entire usable frequency range when applying

1W/1m into the nominal impedance, i.e. 2.83V/8Ω, 4V/16Ω. Eminence response curves

are measured under the following conditions: All speakers are tested at 1W/1m using

a variety of test set-ups for the appropriate impedance | LMS using 0.25” supplied

microphone (software calibrated) mounted 1m from wall/baffle | 2ft x 2ft baffle is built

into the wall with horn front mounted | Carver PM-120 amplifier | 2700 cu.ft. chamber

with fiberglass on all six surfaces (three with custom-made wedges).

Prices, specifications and product cosmetics are subject to change without notice.

footnotes

mission statement Eminence is dedicated to providing the best Quality, Value and Service to meet our customers’ needs.

From design and manufacturing to the stage or studio. Once you’ve experienced the performance of Eminence, you’ll never accept anything else.

eminence speaker llc838 Mulberry Pike, Eminence, KY 40019

Follow us: