Upload
others
View
7
Download
0
Embed Size (px)
Citation preview
Baltimore Aircoil Company Factory Direct Sales Office & Manufacturer’s Representative
Balticare Inc. 501 7th Avenue Suite 414 New York, NY 10018 Ph: 646.380.9470 Fax: 646.380.9410
www.Balticare.net [email protected]
Baltimore Aircoil CompanyThe global leader in sustainable heat transfer and thermal storage, specializing in Open and Closed Circuit Cooling Towers, Evaporative Condensers, Thermal Ice Storage, Wet/Dry Closed Circuit Cooling Towers, Custom Engineered Controls. We also provide an array of parts, maintenance reference materials, and technical information to keep your equipment running at peak performance, with energy efficient solutions and the most reliable parts in the industry.
Kelvion Heat ExchangersKelvion designs and manufactures a full range of plate heat exchangers (gasketed, brazed, and welded) from a dedicated facility in York, PA. Gasketed heat exchangers are AHRI Certified for the HVAC market.
Celebrating Over 40 Years in Business
PEP Filters Inc Water filtration systems for use with open cooling towers, closed-circuit cooling towers, and process water. PEP offers sand, disc, screen, bag, and cartridge filtration, as well as centrifugal separators and basin sweeper jets.
Colmac Coil Colmac Coil manufactures new and replacement plate fin heating and cooling coils, dry coolers, air-cooled condensers, and heat pipe air-to-air heat exchangers for the commercial, industrial, and heat transfer markets.
Flow-Tech HVACFlow-Tech’s revolutionary physical water treatment system generates a low frequency signal that is propagated throughout the entire piping system providing the most technologically advanced solution for scale prevention, bio fouling, and corrosion control.
THE GLOBAL LEADER in sustainable heat transfer and thermal storage
PFi Series VFXV Dual Air Intake FXV HXV Hybrid Tower
Series 3000 Series 1500 Series V FXT PT2
Fan System
E X C L U S I V E F E A T U R E S
Extreme efficiency models reduce energy costs by up to 50%
Fan System
Variable speed direct-drive fan system that provides energy and maintenance savings, the highest reliability, and an industry-leading 7-year motor warranty
1 G-235 Heavy Galvanized Steel Basin
2 Thermosetting Hybrid Polymer Coating
3 Impermeable Polyurethane Barrier
Enhanced three-layer corrosion protection for the cold water basin with
an extended 5-year warranty
Patent-pending system that enhances heat transfer by up to 30%, lowering energy
zand installation costs
The highest level of corrosion protection for all vulnerable components with an extended
5-year warranty
Crossflow // Axial Fan // Induced Draft
Largest single cell cooling capacity to reduce installation costs
Large selection of coil configurations to meet challenging thermal/pressure drop requirements
Advanced Coil Technology maintains efficiency by minimzing fouling on tubes
Lower maintenance and repair costs with easy-service features
Crossflow // Axial Fan // Induced Draft
Highest performance, lowest cost of ownership
Large selection of coil configurations to meet challenging thermal/pressure drop requirements
Advanced Coil Technology maintains efficiency by minimzing fouling on tubes
Fits in enclosures with single sided air intake
Counterflow // Axial Fan // Induced Draft
Patent pending OptiCoil™ Heat Transfer System increases heat transfer capacity by up to 30%
XE models reduce energy usage by up to 50%
The most compact footprint for space- constrained applications
OptiSpray™ Technology reduces pump energy costs
Counterflow // Centrifugal Fan // Forced Draft
High static capability for indoor applications
Low sound performance
Direct replacement for older installations
Easy maintenance with motor at base level
Crossflow // Axial Fan // Induced Draft
Combined Flow Technology offers the flexibility to optimize capacity and save water
Dry mode allows for year-round operation
Capability for zero water usage
Crossflow // Axial Fan // Induced Draft
Highest performance, lowest cost of ownership
ENDURADRIVE™ Fan System yields 10% energy savings, 90% lower maintenance costs, and highest reliability (optional)
XE models reduce energy usage by up to 50%
Largest single cell cooling capacity
Dual air intake ideal for multi-cell applications
Crossflow // Axial Fan // Induced Draft
Fits in enclosures with single sided air intake
XE models reduce energy usage by up to 50%
Ideal for retrofit to reduce energy usage
The most servicable tower —up to 26% lower maintenance costs
Counterflow // Axial Fan // Induced Draft
The most compact footprint for space-constrained applications
Flexible arrangement in multi-cell applications fits unique layouts
Single lift design lowers installation cost
Factory-assembled platforms reduce installation time
Counterflow // Centrifugal Fan // Forced Draft
High static capability for indoor applications
Low sound performance
Direct replacement for older installations
Easy maintenance with motor at base level
Crossflow // Axial Fan // Forced Draft
Small tonnage applications
Compact design fits in tight spaces
Easy access key components for maintenance OP
EN C
OOLI
NG
TOW
ERS
CLOS
ED C
IRCU
IT C
OOLI
NG T
OWER
S