Balmoral Inline DDA Lever Lever

The E Series

White HardexChrome

HardexSatin

HardexBronze

HardexSmoke

AntiqueBlack

HardexGold

AntiqueCopper

T. +44 (0)2476 585 785 F. +44 (0)2476 585 786 E. sales@fabnfix.co.uk www.fabnfix.co.uk

Internal Lever

External Lever

Features & Benefits

• Die cast zinc construction with heavy dutyspring cassetteSturdy feel and consistent 90 degree lever return

• Sculpted extended ergonomic lever and lowfriction nylon bushEasy to grip, smooth action and low operatingforces required

• Wide backplateTo suit cylinder guards and accommodate larger cylinder preparation

• Supplied with screw and spindle pack to suit60-70mm profilesEverything needed for installation included

• Colour coordinated screw headsPerfectly matching hardware, even down to the smallest details

• Ample lever-to-door surface clearance andavailable in a wide range of constrasting colours Compliant with Document M of the The DisabilityDiscrimination Act (DDA)

Balmoral Inline DDA Lever Lever

Our products are subject to continuous development and improvement and we reserve the right to change specifications without prior notice.

Extended Lever

243

211

9275

32

155

20

55

71

Product Codes

Balmoral Inline DDA Lever Lever

Additional Benefits

• Supplied fully assembledSimple and quick installation, no need to fit springs or lever

• Baseplate in common with all Balmoral handlesSame routing detail regardless of product variantchosen

• Secured by DesignAdditional peace of mind

• Supplied with care instructionsHelps the homeowner to keep the hardware in optimal condition

• Silicon Site-Protectors availableEnsures perfect condition after installation

• Each part packaged in a separate chamber, but supplied as a setNo scratching of parts during transit

Technical Specification

Designed for PVC-U and Composite doors

All finishes salt spray tested to 480 hours(BS EN 1670: Class 5)

Tested to 200,000 cycles

Tested as part of a complete door set thatsuccessfully achieved PAS24

92mm PZ

Includes screw and spindle pack suitable for 60mm - 70mm profiles (1 x 8mm x 120mm spindle, 2 x M5 x 70mm colour coordinated machine screws, 2 x M5 x 80mm colour coordinated machine screws)

All dimensions are shown in millimetres

WhiteHardexChrome

HardexSatin

HardexBronze

HardexSmoke

HardexGold

AntiqueBlack

AntiqueCopper

1D400 1D401 1D402 1D403 1D404 1D405 1D406 1D407