Ball Type, Short branch Tees 1.6, 2 & 2.9mm.RTI Design based on

EN10253-3&4 Type A / ISO 5251

DN D T F(1) h 304L 316L Unit Weight Minimum Packing Qty

10 17,2 1,6 25,5 1,4 0,04 kg 10 pcs1,6 0,04 kg 10 pcs2 0,06 kg 10 pcs

1,6 0,06 kg 10 pcs2 0,08 kg 10 pcs

25 33,7 2 38 2,2 0,13 kg 10 pcs32 42,4 2 47,5 1,8 0,20 kg 10 pcs40 48,3 2 57 1,9 0,28 kg 10 pcs50 60,3 2 63,5 2,9 0,39 kg 10 pcs

2 0,58 kg 5 pcs2,9 0,84 kg 5 pcs2 0,77 kg 5 pcs

2,9 1,11 kg 5 pcs2 1,21 kg 3 pcs

2,9 1,75 kg ___2 1,75 kg

2,9 2,50 kg2 2,42 kg

2,9 3,51 kg2 3,93 kg

2,9 5,69 kg250 273 2,9 216 11,5 7,85 kg ___

(1) RTI design, Length is based on ISO 5251. Lengths acc. to EN 10253 are available on request.Our stock is basically composed of 10253-3 products, all of our products can with additional test be delivered according 10253-4EN 10253-4 Type B products can be delivered on requestOther dimensions are available on request, do not hesitate to contact us for larger dimensions or non-standard pieces

21,3

26,9

25,5

28,5

65 76,1

15

20

1,4

178 8,5

3

3,6

105

1,6

150 168,3

200 219,1

80 88,9

100 114,3

125 139,7

___

___

___

76

85,5

3,9

124 6,2

143 7,8

EN10253-3&4 Type A / ISO 5251

DN DN1 T D D1 F(1) h 316L Unit Weight

15 10 2 21,3 17,2 25,5 1,4 0,06 kg10 17,215 21,310 17,215 21,320 26,910 17,215 21,320 26,925 33,710 17,215 21,320 26,925 33,732 42,410 17,215 21,320 26,925 33,732 42,440 48,310 17,215 21,320 26,925 33,732 42,440 48,350 60,310 17,215 21,320 26,925 33,732 42,440 48,350 60,365 76,1

(1) RTI design, Length is based on ISO 5251. Lengths acc. to EN 10253 are available on request.

Our stock is basically composed of 10253-3 products, all of our products can with additional test be delivered according 10253-4

EN 10253-4 Type B products can be delivered on request

Other dimensions are available on request, do not hesitate to contact us for larger dimensions or non-standard pieces

26,9

Ball Type, Short branch Reducing Tees 2 & 2.9mm.

38

20

25 0,13 kg

RTI Design based on

0,08 kg

88,980 2

40 48,3

60,350

42,42

2

2

65 76,12

2

2

32

28,5 1,6

2,233,7

63,5

85,5 3,6

1,8

1,9

2,9

3

47,5

57

76 0,58 kg

0,77 kg

0,28 kg

0,39 kg

0,20 kg

EN10253-3&4 Type A / ISO 5251

DN DN1 T D D1 F(1) h 316L Unit Weight

10 17,215 21,320 26,925 33,732 42,440 48,350 60,365 76,180 88,915 21,320 26,925 33,732 42,440 48,350 60,365 76,180 88,9100 114,315 21,320 26,925 33,732 42,440 48,350 60,365 76,180 88,9100 114,320 26,925 33,732 42,440 48,350 60,365 76,180 88,9100 114,3125 139,720 26,925 33,732 42,440 48,350 60,365 76,180 88,9100 114,3125 139,7

(1) RTI design, Length is based on ISO 5251. Lengths acc. to EN 10253 are available on request.Our stock is basically composed of 10253-3 products, all of our products can with additional test be delivered according 10253-4EN 10253-4 Type B products can be delivered on requestOther dimensions are available on request, do not hesitate to contact us for larger dimensions or non-standard pieces

Ball Type, Short branch Reducing Tees 2 & 2.9mm.RTI Design based on

100

125

105114,3

139,7

2

2

2

2,9

150

1,21 kg

1,75 kg

2,50 kg

2,42 kg

3,51 kg

168,3 143

3,9

6,2124

2,9

7,9

EN10253-3&4 Type A / ISO 5251

DN DN1 T D D1 F(1) h 316L Unit Weight

25 33,732 42,440 48,350 60,365 76,180 88,9100 114,3125 139,7150 168,325 33,732 42,440 48,350 60,365 76,180 88,9100 114,3125 139,7150 168,332 42,440 48,350 60,365 76,180 88,9100 114,3125 139,7150 168,3200 219,1

(1) RTI design, Length is based on ISO 5251. Lengths acc. to EN 10253 are available on request.

Our stock is basically composed of 10253-3 products, all of our products can with additional test be delivered according 10253-4

EN 10253-4 Type B products can be delivered on request

Other dimensions are available on request, do not hesitate to contact us for larger dimensions or non-standard pieces

Ball Type, Short branch Reducing Tees 2 & 2.9mm.RTI Design based on

4,69 kg

7,85 kg

8,5

11,5

178

216

219,1

2,9250 273

200

3,93 kg2

2,9

DN D T F(1) h 304L 316 L Unit Weight Minimum Packing Qty

15 18 1,5 25,5 1 0,03 kg 10 pcs20 23 1,5 25,5 1,5 0,06 kg 10 pcs

28 1,5 28,5 1 0,10 kg 10 pcs38 1,5 47,5 2 0,12 kg 10 pcs40 1,5 47,5 2 0,14 kg 10 pcs

40 44 2 47,5 2 0,20 kg 10 pcs53 1,5 57 2,5 0,20 kg 10 pcs54 2 57 2 0,30 kg 10 pcs

63,5 1,5 63,5 3,3 0,25 kg 5 pcs69/70 2 63,5 3,5 0,50 kg 5 pcs

73 1,5 76 3,5 0,51 kg 5 pcs80 84 2 85,5 3 0,60 kg 5 pcs

104 2 105 3 1,20 kg 3 pcs106 3 105 3 1,85 kg 3 pcs123 1,5 124 3,5 1,50 kg ___129 2 124 4,5 1,50 kg ___154 2 143 7 2,00 kg ___156 3 143 6 2,36 kg ___204 2 178 8 4,30 kg ___206 3 178 7 5,80 kg ___254 2 216 13 5,80 kg ___256 3 216 12 8,00 kg ___

(1) RTI design, Length is based on ISO 5251. Lengths acc. to EN 10253 are available on request.Other dimensions are available on request, do not hesitate to contact us for larger dimensions or non-standard piecesOur stock is basically composed of 10253-3 products, all of our products can with additional test be delivered according 10253-4EN 10253-4 Type B products can be delivered on request

250

150

200

100

25

50

65

125

Ball Type, Short branch Tees 1.5, 2 & 3mm.RTI Design based on

METRIC Piping SizeISO 5251

METRIC Piping SizeISO 5251

DN DN1 T D D1 F(1) h 316L Unit Weight

25 2940 4425 2940 4450 5425 2940 4450 5465 6925 2940 4450 5465 6980 8425 2940 4450 5465 6980 84100 10425 2940 4450 54

2 154 69 143 73 156 71 143 62 154 84 143 73 156 86 143 62 154 104 143 73 156 106 143 62 154 129 143 73 156 131 143 6

(1) RTI design, Length is based on ISO 5251. Lengths acc. to EN 10253 are available on request.Other dimensions are available on request, do not hesitate to contact us for larger dimensions or non-standard piecesOur stock is basically composed of 10253-3 products, all of our products can with additional test be delivered according 10253-4EN 10253-4 Type B products can be delivered on request

652 69

80

2 84

100

2 104 3

4,5129

63,5 3,5

85,5 3

1502 154

65

80

100

125

125

2 129

143 7

Ball Type, Short branch Reducing Tees 2 & 3mm.

0,03 kg57 2

RTI Design based on

50 2 54

105

METRIC Piping SizeISO 5251

DN DN1 T D D1 F(1) h 316L Unit Weight

40 4450 54

2 204 69 178 83 206 71 178 72 204 84 178 83 206 86 178 72 204 104 178 83 206 106 178 72 204 129 178 83 206 131 178 72 204 154 178 83 206 156 178 7

50 2 254 542 254 693 256 71 216 122 254 84 216 133 256 86 216 122 254 104 216 133 256 106 216 122 254 129 216 133 256 131 216 122 254 154 216 133 256 156 216 122 254 204 216 133 256 206 216 12

(1) RTI design, Length is based on ISO 5251. Lengths acc. to EN 10253 are available on request.

Other dimensions are available on request, do not hesitate to contact us for larger dimensions or non-standard pieces

Our stock is basically composed of 10253-3 products, all of our products can with additional test be delivered according 10253-4

EN 10253-4 Type B products can be delivered on request

Ball Type, Short branch Reducing Tees 2 & 3mm.RTI Design based on

100

125

150

216 13

150

25065

80

200

178 82 204

65

80

100

200

125

EN10253-3 Type A / ISO 5251

DN D x e e F(1) 304 L 316 L Unit Weight

2 216 7,00 kg3 216 10,70 kg4 216 14,20 kg2 254 9,70 kg3 254 15,30 kg4 254 19,50 kg5 254 25,70 kg3 279 17,60 kg4 279 21,90 kg5 279 30,90 kg3 305 24,20 kg4 305 30,20 kg5 305 37,60 kg3 343 31,20 kg4 343 39,00 kg5 343 48,50 kg3 381 36,00 kg4 381 48,00 kg5 381 60,00 kg6 381 72,00 kg3 432 52,00 kg4 432 69,00 kg5 432 86,00 kg6 432 104,00 kg

700 711800 813

(1) RTI design, Length is based on ISO 5251. Lengths acc. to EN 10253 are available on request.Our stock is basically composed of 10253-3 products, all of our products can with additional test be delivered according 10253-4EN 10253-4 Type B products can be delivered on requestOther dimensions are available on request, do not hesitate to contact us for larger dimensions or non-standard pieces

273

323,9

350

457

355,6

Produced on request in 4wks

400

609,6

500

450

508

600

406,4

250

300

Welded branch Tees 2, 3, 4, 5 & 6mm.

METRIC Piping Size

DN D x e e F(1) 304 L 316 L Unit Weight

254 2 216 7,50 kg256 3 216 10,70 kg304 2 254 9,70 kg306 3 254 15,30 kg356 3 279 17,60 kg358 4 279 21,90 kg360 5 279 30,90 kg406 3 305 24,20 kg408 4 305 30,20 kg410 5 305 37,60 kg456 3 343 31,20 kg458 4 343 39,00 kg460 5 343 48,50 kg506 3 381 36,00 kg508 4 381 48,00 kg510 5 381 60,00 kg508 6 381 72,00 kg606 3 432 52,00 kg608 4 432 69,00 kg

5 432 86,00 kg6 432 104,00 kg

700 706 / 708 / 710 3/4/5/6800 806 / 808 / 810 3/4/5/6

(1) RTI design, Length is based on ISO 5251. Lengths acc. to EN 10253 are available on request.Other dimensions are available on request, do not hesitate to contact us for larger dimensions or non-standard pieces

250

300

350

400

Produced on request in 4wks

450

500

600

Welded branch Tees 2, 3, 4, 5 & 6mm.

610