Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
With the Rollbag™ 1075, size changes are accomplished in less than a minute utilizing Rollbags™. The 1075 has an optional hot stamp printer for printing date and lot codes. A standard feature is the job storage capability to store up to 10 jobs for recall at a later date. The 1075 can also be interfaced with automatic counters, scales and other in-feed devices.
The Rollbag™ 1075 is the most cost effective, automatic tabletop bagging system available.
The Flexible Packaging Specialists
ROLLBAG 1075The Rollbag™ 1075 is the most cost effective, automatic tabletop rollbag system available. The 1075 is compact, lightweight and utilizes Rollbags™ (pre-opened bags-on-a-roll). Using the latest technological innovations, the 1075 can fill and seal bags significantly faster than manual packaging whether using manual or automated feeding systems.
The Rollbag™ 1075 is the ultimate in reliability and ease of operation. It’s quick to set-up, easy to operate, fast and reliable for hand loading, semi-automatic or fully automatic bag packaging.
ROLLBAG™ 1075BAGGING SYSTEMS
Rollbags™ are pre-opened perforated bags-on-a-roll that make packaging significantly faster than bagging with loose cut bags. They can be pre-printed up to 8 colors for high visibility retail display and brand
identification.
Depending on the material chosen, Rollbags™ can provide oxygen and moisture barrier for sensitive products, protect metal parts from corrosion, or prevent static discharge from harming electronic parts. Our materials meet FDA requirements, including polyethylene,
polypropylene, nylon and metalized polyester, set the standard for many packaging applications. Rollbags™ are also available with a variety of features such as headers,
hang holes, perforations, tear notches and vent holes.
ROLLBAGMROLLBAG™ 1075
w Automatically indexes bag and opens it for quick product loadingw Low pressure closing with obstruction detection system for improved operator safetyw Programmable time delay for operator pace control or ease of integration with automatic feeding devicesw Foot switch, control panel, or optional photo eye available to trigger the baggerw Light weight, compact table top designw Fastest bag changing capability in the industryw Simplicity of the interface makes the 1075 very user friendly and simplifies operator trainingw Designed to minimize preventative maintenance costsw Strip packagingw Job storage capability for up to 10 jobsw Designed to meet CE requirements
w Seal flatteners, mechanical or pneumatic bag deflators and custom supports available to ensure clean, straight, retail package sealsw In-feed conveyors help with kit packaging and/or product counting operations w Can be interfaced with automatic counters, scales and other in-feed devicesw Hot stamp printer for printing date and lot codes w Articulating bag support shelf for heavy productsw Wide variety of standard and custom funnels to assist product handlingw Product load tray with optional dividers for sorting and loading parts or kitsw Adjustable height standw Trim seal or wide sealw Single or dual palm buttons with anti-tie down for added operator safety in manual loading operationw 220V, 50/60 Hz operation
12900 Plaza Dr, Cleveland, OH 44130 | Ph: 216-267-1911 | [email protected]
S
++
FEATURES & BENEFITS
OPTIONS & ACCESSORIES
Bag width 2” - 10” (50mm - 255mm)
Bag length 3” - 20” (75mm - 510mm)
Feed rate up to 18” seconds (457mm/second)
Dimensions 28”L x 24”W x 21.5”H (710mmL x 610mmW x 545mmH)
SPECIFICATIONS
Member of PAC Machinery
ROLLBAGS™
Electrical 115V, 5 amp, 50/60 Hz
Air 80 psi @ 2-5 CFM (5.5 bar @ 140 l/m)
Weight 75 lbs (34 kg)
Speed Dry cycle speed is over 30 bags/min
S load tray
Quick & easy loading of the roll
Standard control panel
Filling funnel