Bag Filtration Systems

Bag Filtration Systems

Solving Your Need for Greater Filtration Efficiency

Eaton’s manufactures bag filterhousings and filter bags toglobal standards for industriesaround the world. In recent years, a number of changes have been made to the manufacturing process tofurther raise the level of qualitydelivered to our customers.

The selection of single bag filter housings range fromthose suitable for exacting absolute filtration applicationsto high quality housingsdesigned, especially for cost-sensitive applications and everything in between. Multi-bag housings that accommodate up to 36 individual filter bags for flowrates of up to 4500 gpm areavailable in a number of different designs.

Eaton is helping customersreduce process costs through its development of a unique line of proprietary filter bagsand elements that offer a compelling, cost-effective alternative to more expensive cartridge filter systems. Customers can choose from a complete line of single ormulti-bag filter housings designed to meet the needs ofthe most demanding applications

Eaton offers a full range of filter bags: more than 1500 choices in all, from economically sewn filter bags for standard applications, to welded, multi-layered bags for more demanding applications.

EF-BV-0110-2012

©2011 Eaton Corporation. All Rights Reserved. All trademarks and registered trademarks are the property of their respective owners. Litho USA. All information and recommendations appearing in this brochure concerning the use of products describedherein are based on tests believed to be reliable. However, it is the user’s responsibility to determine the suitability for his own use of such products. Since the actual use by others is beyond our control, no guarantee, expressed or implied, is made by Eatonas to the effects of such use or the results to be obtained. Eaton assumes no liability arising out of the use by others of suchproducts. Nor is the information herein to be construed as absolutely complete, since additional information may be necessary or desirable when particular or exceptional conditions or circumstances exist or because of applicable laws or government regulations.

Visit us online at

BrazilVoice: +55 (11) 2465-8822

ChinaVoice: +86-21-5200-0099

Europe/Africa/Middle East Voice: +49-2486-809-0

Singapore Voice: +65-6825-1668

North America — HQ70 Wood Avenue, South2nd FloorIselin, NJ 08830

Toll Free: (800) 656-3344 (North America only)

Voice: (732) 767-4200

Eaton Filter Bag Systems

8

AutomotiveFiltration of pretreatment bath, filtration ofE-Coat, topcoat and clearcoat, primer, paint ringline filters, parts cleaning fluids, drawingcompounds, lubricants, metal working fluids, and pump intake filters.

ChemicalCatalyst recovery, removal of pipe scale, polishing of aqueous process fluids, alkalis,acids, and solvents, filtration of emulsions and dispersions, gel removal from resins. Activated carbon or catalyst removal in the fine chemicals industry is a typical example of a demanding application in chemical processing. Eaton Filter Bags meet the application requirements for high filtration efficiency, yet also offer longservice life and reliability.

Metal WorkingFiltration of hydraulic oil, pretreatment systemfiltration, precious metal recovery, metalworking fluids, and drawing compounds. Partscleaning machines use our filter bags for minimizing residual dirt on parts.

Food and BeveragePolishing filtration of wine, spirits and beer,removal of particles from edible oils, removal of carbon black from cellulose, slime removal in gelatins, liquid sugar, thick juice, corn syrup polishing, starch processing, milk processing and soft drinks. Many Eaton Filter Bags conform to FDA and EEC food processing standards and can meet the unique and varied demands of these applications.

Paint and LacquerRemoval of agglomerates, removal of paint coagulates, solvent filtration, removal of storagecontaminants, filling lines, and paint mixing lines, monomer purification.

ElectronicsWafer and chip processing, electronic etching baths, photo-chemical polishing, and high-purity water filtration and prefiltration of variousmembrane filtration processes to improve theircost effectiveness. Eaton Filter Bags demonstrate the required purity, efficiency, and consistent performance.

PetrochemicalsFiltration of lube oils, fuel additives, enhanced oil recovery, filtration of amine solutions, filtration of glycol fluids, gas purificationprocesses, distillation and cracking processes,amine washers, off-shore filter stations, oildrilling, and injection fluids.

PharmaceuticalRecovery of expensive active ingredients, catalyst recovery, active carbon purification and removal, filtration of gelatins, hormones, vitamin extracts, polishing of herbal mixtures, protein removal from plasma, filtration of saline solutions.

Resins, Plastics, Inks, and CoatingsOil and polymer filtration, dispersions,polymerization batches, resins for can coatings,plastics compounding, printing ink, plastics processing, paper coatings, high purity ink-jet fluid filtration.

Water TreatmentWell water filtration, water treatment plants,silt removal, pipe scale removal, sand and algaeremoval from sea water, ion exchange resin recovery, calcium deposit removal, filtration ofchemicals used for water treatment, dustremoval from cooling tower installations. Surface water filtration is an area traditionallydominated by expensive cartridge filtration.

Applications

Filter Bag Housings

ECOLINEFLOWLINESIDELINE

TOPLINEMAXILINEPROLINE

POLYLINEDUOLINEMODULINE

World Proven, Cost Effective Systemsfor Bag Filtration

FLOWLINE II™

One-piece body construction is the easy and economicalchoice for single bag housings.

ECOLINE™Lightweight design for commercial, OEM, non-hazardous, low pressure applications that do not requirea Code Stamp.

POLYLINE®

Rugged, all plastic housingsmeet the needs of ultra-pure or corrosive applications.

MODULINE™

Continuous filtration and largerflow rates in a flexible multi-bag system.

DUOLINE™

Continuous filtration in a dual-housing configuration.

PROLINE 100™

The most competitively priced, 100 psi, non-code vessels that Eaton has to offer. Up to 12bags per housing.

MAXILINE™

Filter housings for high volume applications and processes demanding frequent bag changeouts. Up to 24 bags per housing.

TOPLINE™

The finest bag filter vessel available. From its high- performance design to its investment-cast components, everything about TOPLINE is simply the best.

SIDELINE™

Mid-priced housings are solid, investment-cast filters suitable for most applications.

FLOWLINE™

Versatile, heavy-duty filter housings.

The revolutionary QIC-LOCK™ opening mechanism is the answer to users’ demands whowork in an environment where productivity and safety are the key priorities.

QIC-LOCK opening mechanism is safe to use. An interlock prevents opening until the housing is entirely vented.

QIC-LOCK opening mechanism is simple and fast to operate.Standing in place, the operatorcan rotate the hand wheel and open the cover. There is no requirement to have full movement and access around the housing or use any tools as with conventional bolted closures.

QIC-LOCK opening mechanism has a rugged design, precision machining assures long life and repeatable operation, and a special coating protects the spindle surface from wear and corrosion. The design isapproved for all pressure housing design codes.

QIC-LOCK opening mechanism doesn’t just make life easier for operators; there are significant cost benefits to be realized with greatly reduced downtime and lower maintenance costs.

1. Filter element change necessary – openthe safety interlock to ensure simultaneouspressure relief..

2. Rotate the spindle using the hand wheel to open the V-clamp into the end position.

3. Open the cover aided by spring assistedmechanism.

5. Close the cover.

6. Close the V-clamp by rotation of the spindle.

Fast

Simple

Safe

User

Durable

High

7. Close the safety interlock and the housing is ready to go backon-line.

Open and close your multi-bag housing in 30 seconds or less

EF-BV-02

10-2012

©2012 Eaton Corporation. All Rights Reserved. All trademarks and registered trademarks are the property of theirrespective owners. Litho USA. All information and recommendations appearing in this brochure concerning the useof products described herein are based on tests believed to be reliable. However, it is the user’s responsibility todetermine the suitability for his own use of such products. Since the actual use by others is beyond our control, noguarantee, expressed or implied, is made by Eaton as to the effects of such use or the results to be obtained. Eatonassumes no liability arising out of the use by others of such products. Nor is the information herein to be construed as absolutely complete, since additional information may be necessary or desirable when particular or exceptionalconditions or circumstances exist or because of applicable laws or government regulations.

Visit us online at

BrazilVoice: +55 (11) 2465-8822

ChinaVoice: +86-21-5200-0099





Voice: (732) 767-4200Fax: (952) 906-3706

8

Eaton QIC-LOCK™ Opening Mechanism

Multip

le

Bag

Dispo

sable

Me

dia

FEATURES

100 PSI, non-code vessel, for a wide variety of filtration applications.

QIC-LOCK™ mechanism allows the vessel to be easily opened orclosed in less than 30 seconds—for higher productivity and lower operating costs.

Bypass free filtration

A spring assisted lifting mechanism balances the coverperfectly—giving it a weightless feel.

Use with standard #2 size filter bags

304 stainless steel construction with bead blast external finish

150# RF flanged inlet and outlet ports for side in/tangential outconfiguration

Units come standard with a stainless steel support basket

Heavy duty stainless steel mounting legs are included

OPTIONS

Available as inline or loop pipingconfiguration (shown)

Buna-N O-rings for the cover arestandard, Viton or EPDM are optional

High Volume Filter Housing with QIC-LOCK Cover

Multi-bag Filter Housing

PROLINE 100TM Series SE

4-12

The PROLINE 100™ Series SE is the most competitively pricedmulti-bag vessel Eaton has to offer.

The 100 psi, non-code vessel is ideal for a wide variety offiltration applications. Positive O-ring sealing provides leak-free,safe filtration while the unique 3-point hold down or bayonetfittings ensure a high quality seal between each filter bag andhousing body.

The side inlet and tangential outlet configuration reduceshousing height and provides easy and full drainage.

PROLINE 100™ Series SE with 8 bag capacity

PROLINE 100™ Series SE with 4 bag capacity

Opening the housing for changeout is simple andquick. Disengaging thesafety interlock releases system pressure.

A few turns of the hand wheel opens the v-clamp collar so the cover can be lifted.

The counter-balanced hinge allows the cover to be lifted with ease andstay in any position for filter changeout.

EF-BV-03

10-2012

©2012 Eaton Corporation. All Rights Reserved. All trademarks and registered trademarks are the property of theirrespective owners. Litho USA. All information and recommendations appearing in this brochure concerning theuse of products described herein are based on tests believed to be reliable. However, it is the user’s responsibilityto determine the suitability for his own use of such products. Since the actual use by others is beyond our control, no guarantee, expressed or implied, is made by Eaton as to the effects of such use or the results to be obtained.Eaton assumes no liability arising out of the use by others of such products. Nor is the information herein to beconstrued as absolutely complete, since additional information may be necessary or desirable when particular orexceptional conditions or circumstances exist or because of applicable laws or government regulations.

Visit us online at

BrazilVoice: +55 (11) 2465-8822

ChinaVoice: +86-21-5200-0099





Voice: (732) 767-4200Fax: (952) 906-3706

Technical Data - PROLINE 100™ Series SE No. of Bag Max. Max. Max. Housing Housing I/O I/O

Model Bags Size Flow GPM1 Material2 Pressure Temp3 Volume Weight Connection Configuration Type Vent4

F3AV0400016-304 4 2 SS 100 psi 176 °F 4” In-LIne Flanged 1/2”

F3AV0400016L-304 4 2 SS 100 psi 176 °F 4” Loop Flanged 1/2”

F3AV0600016-304 6 2 SS 100 psi 176 °F 6” In-LIne Flanged 1”

F3AV0600016L-304 6 2 SS 100 psi 176 °F 6” Loop Flanged 1”

F3AV0800016-304 8 2 SS 100 psi 176 °F 6” In-LIne Flanged 1”

F3AV0800016L-304 8 2 SS 100 psi 176 °F 6” Loop Flanged 1”

1. Maximum theoretical flow based on water viscosity, bag specific 2. SS = Austenitic Stainless Steel SS 316 and CF8M or better3. Depending on seal material 4. For details, see available product data sheet

PROLINE 100™ Series SE Multi-bag Filter Housing

8

Dimensions (inches) -PROLINE™ 100 Series SE

Model A B C D E FF3AV0400016-304 10-1/16 20-3/4 55-5/8 22 35-15/16 71-1/8

F3AV0400016L-304 10 20-3/4 55-5/8 22 35-15/16 71-1/8

F3AV0600016-304 7-7/8 20-13/16 55-7/16 31-1/2 46-1/8 78-7/8

F3AV0600016L-304 7-7/8 20-13/16 55-7/16 31-1/2 46-1/8 78-7/8

F3AV0800016-304 7-7/8 20-13/16 55-7/16 31-1/2 46-1/8 78-7/8

F3AV0800016L-304 7-7/8 20-13/16 55-7/16 31-1/2 46-1/8 78-7/8

Dimensions for reference only and approximate. Exact dimensions for installation purposes available onrequest.

APPLICATIONS (needs review)

Coarse Filtration >500 m Medium Filtration >10 mFine Filtration <10 m

Pre-filtrationSafety FiltrationHigh Volume Batch FiltrationCircuit FiltrationContinuous Filtration

Solvents, PaintsFats and OilsCatalyst, Activated CarbonAcids, BasesPetrochemicalsWater, Waste WaterChemical IndustryPharmaceuticalsMetal CleaningAutomotiveElectronicsFood and BeveragePaint and Lacquer

Water TreatmentGalvanic Industry

A

D

BCF

E

E

LoopConfiguration

In-lineConfiguration

Multip

le

Bag

Dispo

sable

Me

dia

FEATURES

Low profile design with tangential inlet/outlet reduces housing height to make bag changing easier. No need for ladders, stools, or catwalks

Positive, 3-point bag hold downs provide individual bag sealing forbypass free filtration

Spring assisted cover lifter allows for quick, easy opening of even the largest covers by a single person

Rugged eye-bolt cover closure is a proven, easy to use design

Use with standard #2 size filter bags

304 stainless steel construction with bead blast external finish

150# RF flanged inlet and outlet ports for side in/tangential outconfiguration

Units come standard with a stainless steel support basket

Heavy-duty stainless steel mounting legs are included

OPTIONS

Available as inline or loop piping configuration (shown)

Buna N O-rings are standard. EPDM, Viton, TFE encapsulatedViton, or silicone rubber seals and gaskets are available

The most competitively priced multi-bag vessel Eaton has to offer


PROLINE 100TM Series HE

4-12

The PROLINE 100™ Series HE is a user friendly, cost effectivebag filter housing for high volume applications andprocesses demanding frequentbag changeouts. The 100 psi, non-code vessel is ideal for a wide variety of filtration needs.

Positive O-ring sealing provides safe and leak-free filtration, while the unique 3-point hold down or bayonet fittings ensure a high quality seal between each filter bag and housing body. A special tool (supplied) ensures simple effective, operation.

A counter-balanced, spring assisted cover lifting mechanism balances the cover perfectly, giving it a weightlessfeel. Opening and closing of the cover with the “littlefinger” is a reality.

The side inlet and tangential outlet configuration reduces housing height and provides easy and full drainage.

PROLINE 100™ Series HE with 8 bag capacity

PROLINE 100™ Series HE with 4 bag capacity

EF-BAC-04

1-2012

©2012 Eaton Corporation. All Rights Reserved. All trademarks and registered trademarks are the propertyof their respective owners. Litho USA. All information and recommendations appearing in this brochureconcerning the use of products described herein are based on tests believed to be reliable. However, it is the user’s responsibility to determine the suitability for his own use of such products. Since the actual use by others is beyond our control, no guarantee, expressed or implied, is made by Eaton as to the effects of suchuse or the results to be obtained. Eaton assumes no liability arising out of the use by others of such products.Nor is the information herein to be construed as absolutely complete, since additional information may be necessary or desirable when particular or exceptional conditions or circumstances exist or because ofapplicable laws or government regulations.

Visit us online at

BrazilVoice: +55 (11) 2465-8822

ChinaVoice: +86-21-5200-0099





Voice: (732) 767-4200Fax: (952) 906-3706

Technical Data - PROLINE 100™ Series HE No. of Bag Max. Max. Max. Housing Housing I/O

Model Bags Size Flow GPM1 Material2 Pressure Temp3 Volume Weight Connection Type Vent4

F3AV0400017-304

F3AV0600017-304

F3AV0800017-304

F3AV1200017-304


PROLINE 100™ Series HE Multi-bag Filter Housing

8

Dimensions (inches) -PROLINE 100™ Series HE

Model A B C D E FF3AV0400017-304

F3AV0600017-304

F3AV0800017-304

F3AV1200017-304Dimensions for reference only and approximate. Exact dimensions for installation purposes available onrequest.

APPLICATIONS





Multip

le

Bag

Dispo

sable

Me

dia

Designed for high capacity and easy, safe changeouts


MAXILINETM VMBF SE

4-8

Multip

le Ba

g

Dispo

sable

Me

dia

sy,

4 84 8

The Maxiline™ VMBF SE is a user friendly, cost effective bag filter housing for high volume applications and processes demanding frequent bag changeouts. It is ideal for batch process runs andhigh dirt load applications.

Positive O-ring sealing offers easy and safe operation while theunique 3-point hold down or bayonet fittings ensure a highquality seal between each filter bag and housing body. A special tool (supplied) ensures simple, effective operation.

A counter-balanced, spring assisted cover lifting mechanism balances the cover perfectly, giving it a weightless feel. Openingand closing of the cover with the “little finger” is a reality.

The housing volume is optimized to minimize product loss, and the side inlet/bottom outlet configuration provides easy and fulldrainage.

QIC-LOCK™ rapid openingmechanism ensuressimple, operator-friendly, and safe operation with minimal downtime to increase productivity and decrease running costs

FEATURES

QIC-LOCK™ spindle mechanism for operator friendly, simple andfast bag changeouts. Ideal for processes requiring frequent baggchanges such as batch applications

Automatic safety interlock for venting housing. Cover cannot bee opened if housing is under pressure

Low profile design with tangential inlet/outlet reduces housing height to make bag changing easier. No need for ladders, stoolls, or catwalks

Spring assisted cover lifter allows for quick, easy opening of evventhe largest covers by a single person

OPTIONS

Available in Type 304 or 316 stainless steel for high corrosion resistance

6 standard sizes with 4 to 24 bag housings for #02 size bags (chart shows only 3 sizes)

Tangential outlet option to reduce housing height (see above)


EF-BAC-04

1-2012


Visit us online at

BrazilVoice: +55 (11) 2465-8822

ChinaVoice: +86-21-5200-0099





Voice: (732) 767-4200Fax: (952) 906-3706

Technical Data - MAXILINE™ VMBF SE No. of Bag Max. Max. Max. Housing Housing I/O


VMBF-0402-AB10-040A-UT-11SE 4 2 400 SS 150 psi 250 °F 69 Gal. 484 lbs 4” Flanged 1”




MAXILINE™ VMBF SE Multi-bag Filter Housing

8

Dimensions (inches) - MAXILINE™ VMBF SE

Model A B C D E FVMBF-0402-AB10-040A-UT-11SE 6.00 20.00 10.50 22.00 15.75 68.00

VMBF-0602-AB10-060A-UT-11SE 7.25 20.00 13.00 31.50 20.75 80.00

VMBF-0802-AB10-080A-UT-11SE 8.25 19.00 12.80 31.50 20.50 80.00Dimensions for reference only and approximate. Exact dimensions for installation purposes available onrequest.

APPLICATIONS





SENTINEL® filter bags utilize a pressure activated sealing lip which responds to increases in differential pressure. As the pressure increases, the seal improves, insuring bypass free performance over all ranges of pressure, temperature and micron ratings.

MAXILINE vessels can use SNAP-RING equipped filter bags.

Multip

le

Bags

Dispo

sable

Me

dia

Rugged design offers many options to meet demanding specifications

Multi-Bag Filter Housing

MAXILINETM MBF HE

4-8

MuMMMMMMMMMMMMMMMMMMltip

le Ba

gs

Dispo

sable

Me

dia

n

et

TM

The Maxiline MBF HE is a user friendly, cost effective bag filter housing for high volumes and multiple applications and processes.processes

Positive O-ring sealing offers easy and safe operation while theunique 3-point hold down or bayonet fittings ensure a highquality seal between each filter bag and housing body. A special tool (supplied) ensures simple, effective operation.

A counter-balanced spring assisted cover-lifting mechanism balances the cover perfectly giving it a weightless feel. Openingand closing of the cover with the “little finger” is a reality.

Housing volume is optimized to minimize product loss and the side inlet/bottom outlet configuration provides easy and full drainage. A tangential outlet option is available to reduce housingheight.

Unique 3-point hold down orbayonet fittings ensure a highquality seal between eachfilter bag and housing body

FEATURES

Low profile design with tangential inlet/outlet reduces hoousing height to make bag changing easier. No need for ladderss, stools, or catwalks


Spring assisted cover lifter allows for quick, easy openingg of eventhe largest covers by a single person

Rugged eye-bolt cover closure is a proven, easy to use ddesign

OPTIONS

Available in Type 304 or 316 stainless steel for high corroosion resistance

Optional segment clamp, T-bolt, hex-nut, or stud-bolt closure

6 standard sizes with 4 through to 24 bag housings for #02 size bags (chart shows only 4 sizes to 8 bag size)

Tangential outlet option to reduce housing height (see above)


Custom fittings, surface finishes, coatings, and design code rat-ings to meet specified applications

EF-BAC-04

1-2012


Visit us online at

BrazilVoice: +55 (11) 2465-8822

ChinaVoice: +86-21-5200-0099





Voice: (732) 767-4200Fax: (952) 906-3706

Technical Data - MAXILINE™ MBF HE No. of Bag Max. Max. Max. Housing Housing I/O


MBF-0302-AB10-030A-UT-11HE 3 2 230 SS or CS 150 psi 250 °F 40 Gal. 245 lbs 3” Flanged 1”





MAXILINETM MBF HE Multi-bag Filter Housing

8

Dimensions (inches) - MAXILINE™ MBF HE

Model A B C D E FMBF-0302-AB10-030A-UT-11HE 6.00 22.50 6.40 18.00 12.75 60.00

MBF-0402-AB10-040A-UT-11HE 6.00 22.20 7.40 24.00 16.00 68.40

MBF-0602-AB10-060A-UT-11HE 7.50 19.50 9.03 24.00 16.50 68.80

MBF-0802-AB10-080A-UT-11HE 8.25 19.00 6.48 30.00 20.50 79.50Dimensions for reference only and approximate. Exact dimensions for installation purposes available on request.

APPLICATIONS





Filter Bag Choices

PROGAF™Absolute rated with up to 15layers of media

ACCUGAF™Absolute rated at 99%

LOFCLEAR™Oil removal and gels

HAYFLOW™Up to 5 times the life of standard bags

DURAGAF™Up to 3 times thelife of standard bags

SENTINEL®High quality, durableperformance

UNIBAG™ Efficiency and value

SNAP-RING® Sewn filterfor easeand economy

Multip

le

Bag

Dispo

sable

Me

dia

Holds up to 24 bags in a reliable, cost, effective design


MAXILINETM MBF HD

3-24

Unique 3-point hold down or bayonet fittings ensure a high quality seal between each filter bag and housing body

FEATURES

Handwheel operated davit cover is rugged, reliable, and very costeffective


Can handle up to 24 bags in one housing for very high flow raates and high dirt load applications

Positive O-ring seals prevent external leakage

OPTIONS

Available in carbon steel and Type 304 stainless steel forhigh corrosion resistance

Hydraulic-assisted davit cover is available

7 standard sizes with 3 through to 24 bag housings for #02 size bags

Buna N O-rings are standard. EPDM, Viton, TFE encapsulatedd Viton, or silicone rubber seals and gaskets are available

Custom fittings, surface finishes, coatings, and design coderatings to meet specified applications

The MAXILINE™ HD multi-bag filter housing features a cost effective, handwheel operated davit cover. Simply loosen theff ti h d h l t d d it Si l l th

swing bolts, turn the davit handwheel, and swing the cover aside to open. Positive O-ring seals, available in a variety of materials,

assures leak-free operation. The unit comes standard with an ASME “U” Code Stamp.

Tapered, electrro-polished stainless

steel perforateed basketts.

EF-BAC-04

1-2012


Visit us online at

BrazilVoice: +55 (11) 2465-8822

ChinaVoice: +86-21-5200-0099





Voice: (732) 767-4200Fax: (952) 906-3706

Technical Data - MAXILINE™ MBF HD

No. of Bag Max. Max. Max. Housing Housing I /O Model Bags Size Flow GPM1 Material2 Pressure Temp3 Volume Weight Connection Type Vent4

MBF-0302-AB10-030A-UT-11HD 3 2 230 SS or CS 150 psi 250 °F 40 Gal. 255 lbs 3” Flanged 1”













MAXILINETM MBF HD Multi-bag Filter Housing

8

Dimensions (inches) - MAXILINE™ MBF HD

Model A B C D E FMBF-0302-AB10-030A-UT-11HD 6.00 22.50 6.40 18.00 12.75 66.00

MBF-0402-AB10-040A-UT-11HD 6.00 22.20 7.80 24.00 16.00 68.00

MBF-0602-AB10-060A-UT-11HD 7.00 20.00 9.80 26.00 18.50 68.00

MBF-0802-AB10-080A-UT-11HD 8.25 19.00 10.78 30.00 20.50 66.00

MBF-1002-AB10-100A-UT-11HD 10.00 17.00 13.30 36.00 24.50 70.00

MBF-1202-AB10-100A-UT-11HD 10.00 17.00 13.80 38.00 24.50 72.00

MBF-1402-AB10-100A-UT-11HD 11.50 20.00 11.81 42.00 28.00 76.00

MBF-1602-AB10-120A-UT-11HD 11.50 20.00 11.81 42.00 28.00 76.00

MBF-1802-AB10-120A-UT-11HD 12.50 22.00 10.69 48.00 31.00 88.00

MBF-2002-AB10-140A-UT-11HD 12.50 22.00 10.69 48.00 31.00 88.00

MBF-2202-AB10-140A-UT-11HD 12.50 22.00 13.44 52.00 33.00 92.00

MBF-2402-AB10-140A-UT-11HD 12.50 22.00 13.44 52.00 33.00 92.00

APPLICATIONS

Coarse Filtration >500 m Medium Filtration >10 mFine Filtration <10 mPre-FiltrationSafety FiltrationHigh VolumeBatch FiltrationCircuit Filtration

Continuous FiltrationSolvents, PaintsFats and OilsCatalyst, Activated CarbonAcids, BasesPetrochemicalsWater, Waste WaterChemical Industry

PharmaceuticalsMetal CleaningAutomotiveElectronicsFood and BeveragePaint and Lacquer Water TreatmentGalvanic Industry

Dimensions for reference only and approximate. Exact dimensions for installation purposes available onrequest.

Epoxy coating is only one of several surface coating and finishoptions

Single

Ba

g

Dispo

sable

Me

dia

FEATURES

Top inlet allows for liquid flow through the cover, requires lessheadroom, and makes bag changeout quick and easy

Cover seals directly onto the filter bag for the finest micronbypass free filtration applications

Five year warranty assures trouble- and maintenance-free service

Adjustable mounting legs simplifies installation

OPTIONS

Carbon steel or Type 304 or 316 stainless steel constructionfor high corrosion resistance

Bag sizes 01 or 02

Magnetic inserts to collect metallic chips, fines, and dust


The best filter housing for the most demanding applications

Single Bag Filter Housing

TOPLINE™

1

TOPLINE™ is the finest single bag filter housing available. From its high performance design to its heavy duty investment-cast high performance design to its heavy duty investment-castcomponents, everything about TOPLINE is simply the best.

The side inlet, flow-through-the-top design results in a minimumheadroom of unfiltered liquid for easy bag changeout as well as providing optimum sealing of the filter bag.

A smooth, bead blasted finish, coupled with a minimum 2-welddesign, makes it easy to completely clean the interior of the TOPLINE housing.

All TOPLINE housings come with an exclusive five year warrantyand the ASME code UM stamp.

TOPLINE housings...for applications too demanding forordinary bag filters.

EF-BAC-04

1-2012


Visit us online at

BrazilVoice: +55 (11) 2465-8822

ChinaVoice: +86-21-5200-0099





Voice: (732) 767-4200Fax: (952) 906-3706

Technical Data - TOPLINE™ No. of Bag Max. Max. Max. Housing Housing I/O


TBF-0101-CS10-020A 1 1 90 CS 150 psi 400 °F 3.5 Gal. 80 lbs 2” Flanged 1/4”

TBF-0102-CS10-020A 1 2 180 CS 150 psi 400 °F 7.25 Gal. 93 lbs 2” Flanged 1/4”

TBF-0101-AB10-020A 1 1 90 SS 150 psi 400 °F 3.5 Gal. 80 lbs 2” Flanged 1/4”

TBF-0102-AB10-020A 1 2 180 SS 150 psi 400 °F 7.25 Gal. 93 lbs 2” Flanged 1/4”

TBF-0102-AB10-020R-M32B0 1 2 180 SS 150 psi 400 °F 7.25 Gal. 93 lbs 2” Tri-clamp 1/4”1. Maximum theoretical flow based on water viscosity, bag specific 2. SS = Austenitic Stainless Steel SS 316 and CF8M or better 3. Depending on seal material 4. For details, see available product data sheet

TOPLINE™ Single Bag Filter Housing

8

Dimensions (inches) - TOPLINE™

Model A B C D E FTBF-0101-AB10-020A 17.70 15.50 1.93 8.62 12.08 53.50

TBF-0102-AB10-020A 17.70 31.00 1.93 8.62 12.08 84.25

TBF-0102-AB10-020R-M32B0 15.80 32.78 1.93 8.62 12.83 84.25Dimensions for reference only and approximate. Exact dimensions for installation purposes available onrequest.

APPLICATIONS


Pre-filtrationSafety FiltrationHigh VolumeBatch FiltrationCircuit FiltrationContinuous Filtration



SENTINEL® filter bags utilize a pressureactivated sealing lip which responds to increases in differential pressure. As pressure increases, the seal improves, insuring bypass free performance over all ranges of pressure, temperature, and micron rating.

TOPLINE™ vessels can also use SNAP-RING equipped filter bags.

Single

Ba

g

Dispo

sable

Me

dia

FEATURES

Side inlet with evacuation cover prevents spillage of unfilteredliquid, making bag changes less messy

Cover opening direction easily adapts to different piping layouts,and can be adjusted in the field to accommodate walls, posts, or other obstructions

Compression bag hold down creates 360 degree sealing betweenthe filter bag and the housing

Ergonomic integral cover handle is easy to open

OPTIONS

Available in Type 304 or 316 stainless steel construction for high corrosion resistance

Compatible with filter bag sizes 01, 02, 03, and 04

Standard eye-bolt closure with either 2” or 3” ANSI flangedconnections

Reliable, mid-price filter housing for most applications


SIDELINE™

1

SIDELINE™ housings are solid, investment-cast filters suitable for all heavy duty industrial applications.

With a smooth, bead blasted finish and minimum 2-weld design, it’s easy to completely clean the interior of the SIDELINE’shousing. Type 304 or 316 stainless steel construction ensuressuperior corrosion resistance and consistent performance, year after year.

SIDELINE housings fall in the medium cost range. Each comes with an exclusive five year warranty and the ASME code UMstamp.

EF-BAC-04

1-2012


Visit us online at

BrazilVoice: +55 (11) 2465-8822

ChinaVoice: +86-21-5200-0099





Voice: (732) 767-4200Fax: (952) 906-3706

Technical Data - SIDELINE™ No. of Bag Max. Max. Max. Housing Housing I/O


SBF-0101-AB10-020A 1 1 90 SS 150 psi 400 °F 4.75 Gal. 84 lbs 2” Flanged 1/4”




SBF-0103-AB21-015N 1 3 25 SS 300 psi 225 °F 0.5 Gal. 26 lbs 1 1/2” NPT 1/4”

SBF-0104-AB21-015N 1 4 50 SS 300 psi 225 °F 0.7 Gal. 29 lbs 1 1/2” NPT 1/4”


SIDELINE™ Single Bag Filter Housing

8

Dimensions (inches) - SIDELINE™

Model A B C D E FSBF-0101-AB10-020A 17.70 19.50 3.15 8.62 8.66 54.70

SBF-0101-AB10-030A 17.70 19.50 3.15 8.62 8.66 54.70

SBF-0102-AB10-020A 17.70 35.00 3.15 8.62 8.66 85.50

SBF-0102-AB10-030A 17.70 35.00 3.15 8.62 8.66 85.50

SBF-0103-AB21-015N NA 11.77 2.95 4.50 3.50 21.80

SBF-0104-AB21-015N NA 17.87 2.95 4.50 3.50 33.90Dimensions for reference only and approximate. Exact dimensions for installation purposes available on request.

APPLICATIONS





SENTINEL® filter bags utilize a pressureactivated sealing lip which responds to increases in differential pressure. As thepressure increases, the seal improves, insuring bypass free performance over all ranges of pressure, temperature andmicron rating.

Single

Ba

g

Dispo

sable

Me

dia

FEATURES

Fabricated construction provides a cost effective, lighter weightalternative to cast filter housings

Cover opening direction easily adapts to different piping layouts,and can be adjusted in the field to accommodate walls, posts or other obstructions

Adjustable mounting legs simplify installation

Integral cover handle is easy to open and close

OPTIONS

Available in Type 304 or 316 stainless steel construction for high corrosion resistance

Compatible with filter bag sizes 01 and 02

Standard design available with threaded or flanged connections

Light weight, cost effective filter housings to meet heavy duty demands


FLOWLINE™

1

FLOWLINE™ housings have a cost effective design whichincorporates all of the features demanded by heavy duty applications in a light weight construction. They are the bestchoice for industrial, commercial, and OEM operations that donot require a code stamp.

Specially-crafted with a minimum number of welds and asmooth, bead blasted finish, the FLOWLINE’s interior surface and housing are easy to completely clean.

.

Ergonomic Integral cover handle is easy to open and close

EF-BAC-04

1-2012


Visit us online at

BrazilVoice: +55 (11) 2465-8822

ChinaVoice: +86-21-5200-0099





Voice: (732) 767-4200Fax: (952) 906-3706

Technical Data - FLOWLINE™ No. of Bag Max. Max. Max. Housing Housing I/O


FBF-0101-AB10-020A 1 1 90 SS or CS 150 psi 250 °F 4 Gal. 30 lbs 2” Flanged 1/4”

FBF-0101-AB10-020N 1 1 90 SS or CS 150 psi 250 °F 4 Gal. 30 lbs 2” NPT 1/4”

FBF-0102-AB10-020A 1 2 180 SS or CS 150 psi 250 °F 7 Gal. 43 lbs 2 Flanged 1/4”

FBF-0102-AB10-020N 1 2 180 SS or CS 150 psi 250 °F 7 Gal. 43 lbs 2” NPT 1/4”

1. Maximum theoretical flow based on water viscosity, bag specific 2. SS = Austenitic Stainless Steel SS 316 and CF8M or better 3. Depending on seal material 4. For details, see available product data sheet

FLOWLINE™ Single Bag Filter Housing

8

Dimensions (inches) - FLOWLINE™

Model A B C D E FFBF-0101-AB10-020A 17.70 20.75 3.34 7.68 6.70 54.90

FBF-0101-AB10-020N 17.70 19.64 3.34 7.68 5.37 54.90

FBF-0102-AB10-020A 17.70 36.31 3.34 7.68 6.70 85.70

FBF-0102-AB10-020N 17.70 35.19 3.34 7.68 5.37 85.70

Dimensions for reference only and approximate. Exact dimensions for installation purposes available on request.

APPLICATIONS





Filter Bag Choices

PROGAF™Absolute ratedwith up to 15layers of media



HAYFLOW™Up to 5 times the life of standardbags

DURAGAF™Up to 3 times the life of standard bags

SENTINEL® High quality,durableperformance

UNIBAG™ Efficiency andvalue


Single

Ba

g

Dispo

sable

Me

diaSingle Bag Filter Housing

FLOWLINE II™

1

S B D M

Unique, internal body-to-basket O-ring seal prevents bypass and is easy to maintain

FLOWLINE II™ features a unique one-piece body design that eliminates the traditional body-to-bottom cap circumferential weld. It is the most cost effective solution for single bag vesselrequirements.

The FLOWLINE style cover design, with its integral handle,provides safe and reliable “no tools required” access for bagreplacement. The displacement style design prevents spills whenopening the cover.

The FLOWLINE II with 2” connections is available in threeconfigurations: side in and bottom out; side in and side out onopposite sides for in-line piping; or side in and side out on thesame side for loop design layouts or duplexing. These unitscome standard with 2” NPT bottom drain connections.

.

One-piece body construction is the easy and economical choice for single bag housing applications

FEATURES

Easy open cover features integral handle, 1/4// ” vent and gaugeports, and “no tools” eye-bolt closures

316 stainless steel support basket

Adjustable mounting legs simplify installation

Kynar® compression ring provides an advanced, long term solution for securing the filter media and support basket intothe enclosure

Buna-N O-ring seals for the cover and basket

Bead blast external finish is standard for stainless steelconstruction. Shop paint is standard for carbon steel construction

OPTIONS

Available in three configurations: side in and bottom out; side inn and side out on opposite sides for in-line piping; or side in andside out on the same side for loop design layouts or duplexing

Carbon steel, 304,or 316 stainless steel construction

Compatible with filter bag sizes 01 and 02

End connection options include: 2” NPT or 2” 150# RF flanged. The #2 size unit is also available with 3” 150# RF flanges in the side in/side out and loop configuration as well as bottom outconfiguration

Additional body ports available

EF-BAC-04

1-2012


Visit us online at

BrazilVoice: +55 (11) 2465-8822

ChinaVoice: +86-21-5200-0099





Voice: (732) 767-4200Fax: (952) 906-3706

Technical Data - FLOWLINE II™ No. of Bag Max. Max. Max. Housing Housing I/O


SBL101S62ASOBSP0

SBL101S62NSOBSP0

SBL102S62ASOBSP0

SBL102S62NSOBSP0

SBL102S63ASOBSP0

SBL101S42ASOBSP0

SBL101S42NSOBSP0

SBL102S42ASOBSP0

SBL102S42NSOBSP0

SBL102S43ASOBSP0

SBL101CS2ASOBSP0

SBL101CS2NSOBSP0

SBL102CS2ASOBSP0

SBL102CS2NSOBSP0

SBL102CS3ASOBSP0


FLOWLINE II™ Single Bag Filter Housing

8

Dimensions (inches) - FLOWLINE II™

Model A B C D E FSBL101__2ASOBSP0

SBL101__2NSOBSP0

SBL102__2ASOBSP0

SBL102__2NSOBSP0

SBL102__3ASOBSP0

Dimensions for reference only and approximate. Exact dimensions for installation purposes available on request.

SPLASH GUARD option

for added safety

Helps protect operatorsfrom unexpectedpressurized spray anddischarge

Single

Ba

g

Dispo

sable

Me

dia

FEATURES

Side inlet with evacuation cover prevents spillage of unfilteredliquid, making bag changes less messy

Compression bag hold down creates 360 degree sealing betweenthe filter bag and the housing

V-clamp cover closure is easy to operate, allowing cover to beremoved or closed quickly

Cost effective design is ideal for price sensitive applications

Type 304 stainless steel construction for high corrosion resistance

Designed with threaded couplings and 1/4// ” NPT connection on the lid to easily fit a vent or gauge

OPTIONS

Models available for filter bag sizes 01, 02, 03, and 04

Light weight, economical filter housing for commercial applications


ECOLINE™

1

ECOLINE™ housings are light weight, designed for commercial, OEM, non-hazardous, low pressure applications that do notrequire a Code Stamp.

Its economical construction features a handy V-clamp closureand threaded couplings. ECOLINE housings are made from Type304 stainless steel for superior resistance to corrosion andconsistent performance. A smooth, bead blasted finish makes iteasy to completely clean the housing interior.

SiSngle

Ba

g

Dispo

sable

Me

dia

EF-BAC-04

1-2012


Visit us online at

BrazilVoice: +55 (11) 2465-8822

ChinaVoice: +86-21-5200-0099





Voice: (732) 767-4200Fax: (952) 906-3706

Technical Data - ECOLINE™ No. of Bag Max. Max. Max. Housing Housing I/O


EBF-0101-AB10-020N 1 1 90 SS 100 psi 250 °F 4 Gal. 25 lbs 2” NPT 1/4”

EBF-0102-AB10-020N 1 2 180 SS 100 psi 250 °F 7 Gal. 38 lbs 2” NPT 1/4”

EBF-0103-AB10-015N 1 3 25 SS 150 psi 250 °F 0.5 Gal. 9 lbs 1 1/2” NPT 1/4”

EBF-0104-AB10-015N 1 4 50 SS 150 psi 250 °F 0.7 Gal. 11 lbs 1 1/2” NPT 1/4”


ECOLINE™ Single Bag Filter Housing

8

Dimensions (inches) - ECOLINE™

Model A B C D E FEBF-0101-AB10-020N NA 19.64 3.24 7.68 5.37 37.00

EBF-0102-AB10-020N NA 35.19 3.24 7.68 5.37 68.00

EBF-0103-AB10-015N NA 11.77 2.78 4.50 3.50 22.45

EBF-0104-AB10-015N NA 17.87 2.78 4.50 3.50 33.84Dimensions for reference only and approximate. Exact dimensions for installation purposes available on request.

APPLICATIONS





Filter Bag Choices

PROGAF™Absolute rated with up to 15layers of media



HAYFLOW™Up to 5 times the life of standard bags

DURAGAF™Up to 3 times thelife of standard bags

SENTINEL®High quality, durableperformance

UNIBAG™ Efficiency and value


Single

Ba

g

Dispo

sable

Me

dia

FEATURES

All plastic construction with smooth interior surfaces make it easy to clean. Will never rust, corrode, or contaminate the processmedia

Hand removable, spin off cover for fast bag changeouts. No toolsare needed to remove cover

Dual outlets allow either in-line or loop piping connections withother outlet used as a drain

OPTIONS

Models available for size 01 or 02 filter bags (PVDF with 02 only)

Duplex model available for applications requiring continuous flow

Rugged housings with a choice of PVC, CPVC, PPL, or PVDF construction for ultra-pure or corrosive applications


POLYLINE™

1

POLYLINE™ filter housings have no metal components to rust,corrode or contaminate the process media. You get extrafeatures at no extra cost, such as: a vent/bleed valve installed onthe housing cover, and an integral mounting flange for rock-solidinstallation without the need for support legs. The two bottompipe connections are interchangeable as outlet or drain, allowing easy modification to in-line or loop piping arrangements to accommodate any installation design.

The hand removable, no tools required, spin off cover makes filter bag changing quick and easy. Just a few turns of the coverusing the built-in handle, and the housing opens and closes withlittle effort.

For applications that require continuous flow, duplex models are available. The flow never has to be shut down for bag changeout.

For contamination sensitive or severely corrosive filtration applications, aPOLYLINE housing is your best choice.

PVC/CPVC modelsfeature true unionconnections

PPL/PVDF models feature external cover threads

Duplex models for continuous

flow applications

EF-BAC-04

1-2012


Visit us online at

BrazilVoice: +55 (11) 2465-8822

ChinaVoice: +86-21-5200-0099





Voice: (732) 767-4200Fax: (952) 906-3706

Technical Data - POLYLINE™ No. of Bag Max. Max. Max. Housing Housing I/O

Model Bags Size Flow GPM1 Material Pressure Temp2 Volume Weight Connection Type Vent3

PBF-0101-PO10-020A 1 1 50 PPL 150 psi 70 °F 6.6 Gal. 55 lbs 2” Flanged 1/4”

PBF-0101-PO10-020N 1 1 50 PPL 150 psi 70 °F 6.6 Gal. 51 lbs 2” NPT 1/4”

PBF-0102-PO10-020A 1 2 100 PPL 150 psi 70 °F 9.5 Gal. 68 lbs 2” Flanged 1/4”

PBF-0102-PO10-020N 1 2 100 PPL 150 psi 70 °F 9.5 Gal. 64 lbs 2” NPT 1/4”

PBF-0102-PF07-020A 1 2 100 PVDF 100 psi 80 °F 9.5 Gal. 100 lbs 2” Flanged 1/4”

D-PBF-0101-PO10-020A 1+1 1 50 PPL/CPVC 150 psi 70 °F 14.5 Gal. 162 lbs 2” Flanged 1/4”

D-PBF-0101-PO10-020N 1+1 2 100 PPL/CPVC 150 psi 70 °F 20.6 Gal. 190 lbs 2” Flanged 1/4”

1. Maximum theoretical flow based on water viscosity, bag specific 2. Depending on seal material 3. For details, see available product data sheet

POLYLINE™ Single Bag Filter Housing

8

Dimensions (inches) - POLYLINE™

Model A B C D E FPBF-0101-PO10-020A 3.26 20.75 3.38 10.35 8.50 60.00

PBF-0101-PO10-020N 3.26 20.75 3.38 10.35 6.14 60.00

PBF-0102-PO10-020A 3.26 36.75 3.38 10.35 8.50 76.00

PBF-0102-PO10-020N 3.26 36.75 3.38 10.35 6.14 76.00

PBF-0102-PF07-020A 3.26 36.00 3.88 10.35 8.50 75.25

D-PBF-0101-PO10-020A 6.10 39.04 3.88 10.35 30.00 75.10

D-PBF-0101-PO10-020N 6.10 55.04 3.88 10.35 30.00 91.10Dimensions for reference only and approximate. Exact dimensions for installation purposes available on request.

APPLICATIONS





°

°

psi

Operating Temperature/Pressurefor Polyline Filter Housings

PVC/CPVC PPL/PVDF

Multip

le

Bags

Dispo

sable

Me

dia

Modular system provides continuous flow capability for higher efficiency and greater cost savings.


MODULINE™

2-8

The new MODULINE™ system provides a compact and efficient assembly of two or more single bag housing units. MODULINE can be equipped with the economical FLOWLINE™ housing for course particle filtration, the SIDELINE™ housing for a greater range of applications, or the most advanced TOPLINE™housing.

MODULINE is a space saving design that can be readily expanded with additional housing units and extra banks toprovide the highest level of flexibility for your processrequirements. The footprint is smaller than duplexed multi-baghousings.

The multi-vessel arrangement assures continuous flow rates.Each unit is individually valved and can be taken off-line in sequence for bag changeouts without having to take thecomplete bank of filters off-line.

FEATURES

2 to 8 FLOWLINE™, TOPLINE™, or SIDELINE™™ housing units ineach assembly allow sequential bag changeoutts without system interruption

316 stainless steel vessel and basket for superrior corrosion resistance

Swing bolt cover for quick, easy changeouts. TOPLINE features a OPLINE features a domed cover. FLOWLINE and SIDELINE covers feature anintegrated ergonomic handle

TOPLINE and SIDELINE models feature extended five yearwarranties and ASME code stamps

Easy-action, 1/4// -turn ball valves provide precision flow control

Smooth bead blasted finish for easy cleaning

Unique two-weld design

OPTIONS

Optional guages, vents and pressurize air port with 1/4” NPT threaded cover taps

Buna N O-ring are standard. EPDM, Viton, TFE encapsulatedViton, or silicone rubber seals and gaskets are available

EF-BAC-04

1-2012


Visit us online at

BrazilVoice: +55 (11) 2465-8822

ChinaVoice: +86-21-5200-0099





Voice: (732) 767-4200Fax: (952) 906-3706

MODULINE™ Multi-bag Filter Housing

8

APPLICATIONS





858 [219]

A

6 [152]12 [305] TYP

6 [152]

LID SWING

1/4" NPT GAUGEPORT, HIGH

1/4" NPTVENT PORT

PRESSURE

C

34 [864]

B

18 [458]D

INLET

1/4" NPT GAUGEPORT, LOWPRESSSURE

2-WAY BALL VALVEFOR ISOLATION

LIDHANDLE

INLET

OUTLET

1/2" NPTDRAIN PORT

E

OUTLET

1 2

M-TBF-0202 2 2 140 16.5 Gal. 320 lbs 150 psid 400 °F 3” 24“ 23” 4-3/4“ 24-3/16” 44-7/16“

M-TBF-0302 3 2 210 25.7 Gal. 490 lbs 150 psid 400 °F 4” 36” 35” 5-1/4” 24-11/16” 44-15/16”

M-TBF-0402 4 2 280 35 Gal. 630 lbs 150 psid 400 °F 4” 48” 47” 5-1/4” 24-11/16” 44-15/16”

M-TBF-0502 5 2 350 54.2 Gal. 800 lbs 150 psid 400 °F 6” 60” 59” 6-5/16” 25-3/4” 46”



M-TBF-0802 8 2 560 86 Gal. 1250 lbs 150 psid 400 °F 6” 96” 95” 6-5/16” 25-3/4” 46”

1. Values at 21. psid 2. psid values are without filter media

Dimensions for MODULINE using TOPLINE Vessels.

Details on MODULINE assemblies using SIDELINE and FLOWLINE vessels available on request.

Technical Data - MODULINE™ Systems with TOPLINE™ housings

Dimensions in inches

0.1

0.2

0.4

0.6

1.0

1.6

2.1

2.8

3.6

4.4

5.3

6.5

pre

ssu

re d

rop

, p

si

flow rate gpm, per housing0 6020 40 80 100 120

Flow vs. Pressure DropFor single housing,without media

Multip

le

Bags

Dispo

sable

Me

dia

Duplex units assembled from standard TOPLINE™, SIDELINE™, or FLOWLINE™ housings for continuous filtration processes


DUOLINE™

2

The DUOLINE™ filter housing system consists of two bag filterhousings (SIDELINE,TOPLINE, or FLOWLINE) fitted together at the inlet and outlet by either butterfly or ball valve assemblies.The dual housing system allows the filtration process to runcontinuously even during bag changeouts.

DUOLINE housings equipped with butterfly valves can be ordered with a linkage assembly. A quick turn of the linkage handle diverts the flow from one filter housing to the other,guaranteeing a synchronized changeover.

FEATURES

Two housing units in each assembly allow sequential bag changeouts without system interruption

Swing bolt cover for quick, easy changeouts. TOPLINE features a domed cover. FLOWLINE and SIDELINE coversfeature an integrated ergonomic handle

Extended five-year warranty and ASME code stamp

Sized for #02 double-length filter bags (7”dia. x 32”)

OPTIONS

Choice of stainless steel or carbon steel housings and fittings

Available without valves, with butterfly valves, or with ball valve assemblies

Buna N O-ring are standard. EPDM, Viton, TFE encapsulatedViton, or silicone rubber seals and gaskets are available

EF-BAC-04

1-2012


Visit us online at

BrazilVoice: +55 (11) 2465-8822

ChinaVoice: +86-21-5200-0099





Voice: (732) 767-4200Fax: (952) 906-3706

DUOLINE™ Multi-bag Filter Housing

8

APPLICATIONS





Dimensions in inches

Technical Data - DUOLINE™ No. of Bag Max. Max. Max. Housing Housing I/O


F3AVTB0222 (TOPLINE) 2 2 180 SS 150 psi 250 °F 16 Gal. 240 lbs 2” Flanged 1/4”

F3AVTB0322 (TOPLINE) 2 2 180 CS 150 psi 250 °F 16 Gal. 240 lbs 2” Flanged 1/4”

F3AVSB00222 (SIDELINE) 2 2 180 SS 150 psi 250 °F 16 Gal. 300 lbs 2” Flanged 1/4”

F3AVSB00322 (SIDELINE) 2 2 180 SS 150 psi 250 °F 17 Gal. 330 lbs 3” Flanged 1/4”

F3AVFB00422 (FLOWLINE) 2 2 180 SS 150 psi 250 °F 15 Gal. 200 lbs 2” Flanged 1/4”

F3AVFB00442 (FLOWLINE) 2 2 180 CS 150 psi 250 °F 15 Gal. 200 lbs 2” Flanged 1/4”

F3AVFB00443 (FLOWLINE) 2 2 180 CS 150 psi 250 °F 15 Gal. 200 lbs 3” Flanged 1/4”

1. Maximum theoretical flow based on water viscosity, bag specific 2. SS = Austenitic Stainless Steel SS 316 and CF8M or better, CS = Carbon Steel3. Depending on seal material 4. For details, see available product data sheet

Dimensions (inches) - DUOLINE™

Model A B C D E FF3AVTB0222 (TOPLINE) 17.70 24.50 1.93 8.62 37.45 84.25

F3AVTB0322 (TOPLINE) 17.70 24.50 1.93 8.62 37.45 84.25

F3AVSB00222 (SIDELINE) 17.70 27.50 3.15 8.62 30.82 85.50

F3AVSB00322 (SIDELINE) 17.70 27.50 3.15 8.62 33.32 85.50

F3AVFB00422 (FLOWLINE) 17.70 28.44 3.34 7.68 37.45 85.50

F3AVFB00442 (FLOWLINE) 17.70 28.44 3.34 7.68 37.45 85.50

F3AVFB00423 (FLOWLINE) 17.70 28.44 3.34 7.68 37.45 85.50Dimensions for reference only and approximate. Exact dimensions for installation purposes available on request.

Mechanically Cleaned Filters & Strainer////////////////////////////////////////////Mechanically Cleaned Filters & StrainerMechanically Cleaned Filters & StrainerTECHNICAL INFORMATION //////////////Mechanically CleaneMechanically CleaneMechanically CleaneMechanically Cleane

EF-G / L-131-2011

©2011 Eaton Corporation. All Rights Reserved. All trademarks and registered trademarks are the property of their respective owners. Litho USA. All information and recommendations appearing in this brochure concerning the use of products describedherein are based on tests believed to be reliable. However, it is the user’s responsibility to determine the suitability for his own use of such products. Since the actual use by others is beyond our control, no guarantee, expressed or implied, is made by Eatonas to the effects of such use or the results to be obtained. Eaton assumes no liability arising out of the use by others of suchproducts. Nor is the information herein to be construed as absolutely complete, since additional information may be necessary or desirable when particular or exceptional conditions or circumstances exist or because of applicable laws or government regulations.

Visit us online at

BrazilVoice: +55 (11) 2465-8822

ChinaVoice: +86-21-5200-0099





Voice: (732) 767-4200

8

Filter Bag Housing Specification Codes

PEU 10 P 01 UE WW 30 30

SeriesMBF: MAXILINEF3A: PROLINE 100TBF: TOPLINESBF: SIDELINEPBF: POLYLINEFBF: FLOWLINESBL: FLOWLINE IIEBF: ECOLINE

D: DUOLINEM: MODULINE

Number of Bags 01, 02, 04, 08, 12, 16, 20, 24

Pressure Rating10: 150 psi21: 300 psi

Bag Size01 7” x 16”02 7” x 32”03 4” x 16”04 4” x 32”

Connection TypeA: ANSI FlangeN: NPT Female Thread

MaterialAB: SS316CS: Carbon SteelPO: PolypropylenePF: PVDF

Connection Size050- 1/2”010- 1”012- 1-1/4// ”015- 1-1/2”020- 2”up to 140- 14”

––– ––– ––– –––

Mechanically Cleaned Filters & Strainer////////////////////////////////////////////Mechanically Cleaned Filters & StrainerMechanically Cleaned Filters & StrainerTECHNICAL INFORMATION //////////////Mechanically CleaneMechanically CleaneMechanically CleaneMechanically Cleane////

Applications

Special ApplicationsThe engineers at Eaton can adapt any of ourfiltration products for special applications.

One such request resulted in the FloWash™ system, a FLOWLINE II™-based configuration whicch addresses the environmental impact of firee supression systems.

Custom fabricated skid systems can be engineered to your exact specifications

Contact Eaton and let us know about your special needs. Call (800) 656-3344 or

HD HE SE

Coarse Filtration >500 m

Medium Filtration >10 m

Fine Filtration <10 m

Pre-filtration

Safety Filtration

High Volume

Batch Filtration

Circuit Filtration

Continuous Filtration

Solvents, Paints

Fats and Oils

Catalyst, Activated Carbon

Acids, Bases

Petrochemicals

Water, Waste Water

Chemical Industry

Pharmaceuticals

Metal Cleaning

Automotive

Electronics

Food and Beverage

Paint and Lacquer

Water Treatment

Galvanic Industry

The patent-pending FloWash™ system includes a 15 gallon translucent

system inspection tests and maindrain tests. Users can maintain NFPA drain tests. Use

NEED PROLINE

Eaton Custom Fabricated Filter Skids can be fabricated in a variety ofmetals and can be custom configured with pumps, automated valves, control packages, etc. Fabricated filter systems are engineered fit the exact requirements of the application, using single or multi-bag vessels as well as automated self-cleaning systems.

10

11

01

09

07

0403

05

02

06

08

The wide range of Eaton Filter Housing Accessories makes itpossible to custom design a housing to the exact specifications of your application, no matter how complex or unique it may be.

Accessories also can be used to improve application processes or requirements. For example, displacementballoons make bag changeouts easier, and LOFNETICmagnetic inserts extend filter bag life in applications where magnetic particles areg pencountered.

Original Eaton “added value”Accessories are guaranteed to work with your Eaton FilterHousing System to deliver the highest performance and reliability.

Original Eaton Accessories, Consumables,

and Spare Parts for Safety and Reliability

////////////////////////////////////////////TECHNICAL INFORMATION ////////////////

Restrainer Baskets

Heavy duty, electro-polished SS 316, perforated plate baskets(included with housing) allow use of filter bags and HAYFLOW™ elements up to differential pressures of 30 psi.Available in all standard sizes, fitting all Eaton bag filterhousings. Specially designed restrainer baskets, including construction options such as HASTELLOY or EPOXY coated,are available. Standard baskets can be used in combinationwith adaptor rings for retrofitting other types of housings.

LOFNETIC Magnets

Magnet assemblies are inserted into the filter bag duringfiltration. They are a combination of bag positioner fitted in thecenter with a magnetic bar(s). Bag lifetime is extended by retaining magnetic particles, such as chips and fines, preventing deposition onto the filter media. They also retainfiner magnetic dust when using bags of coarser micron rating. Eaton magnetic strainers are available in size 01 and 02 usingone or two SS 316-covered magnetic bars.

Bag Positioners

Highly recommended for all installations, and mandatory for some, bag positioners (or bag locks) ensure correct positioningof the filter bag within the basket and eliminate any “bobbing” up and down movement of the bag caused by uncontrolledback pressure. This avoids any chance of the bag bursting.ACCUGAF™, PROGAF™, and LOFCLEAR™ 500 filter bagsneed to be equipped with a bag positioner. A special, new collar design firmly fixes the positioner element inside the bagduring filtration. They are available in sizes 01 and 02.

Leg Assemblies

Height-adjustable leg assemblies are standard for size 01 and 02 TOPLINE™, FLOWLINE™, and SIDELINE™ housings, and are optional for ECOLINE™ housings. Wall mounting brackets are also available.

Displacement Balloons

Inserting a displacement balloon inside the filter bag minimizes the amount of residual liquid present in the filter bag andreduces product loss. This eases the changing of the filter bag,eliminating the need for expensive, pressure-aided draining systems. A special, new collar design firmly positions the balloon inside the bag. The SS 316 balloons’ maximum DP is230 psi. They are available in sizes 01 and 02.

Manifold Modules

Eaton standard pipe modules are available in SS 316. 90° elbows, flange reductions, flanged “T” sections, and flangemanifolds can be easily assembled to make DUOLINE™ or MODULINE™ bag filter systems based on FLOWLINE™, SIDELINE™, or TOPLINE™ size 01 or 02 housings.

Adapter Heads for Open Filtration

Used in conjunction with SNAP-RING® filter bags in gravity feed, open systems. Adapter heads are available in SS 316 andpolypropylene with a 1.5” NPT connection for pressures to20 psi.

Gaskets and O-ring Seals

As standard, Eaton metal filter housings are fitted with Buna NO-rings. Plastic housings have Viton® O-rings. Other material options, such as EPDM, Viton, TFE encapsulated Viton, orsilicone rubber, are available as flat gaskets. The options offer avariety of chemical and thermal resistances to meet a multitude of uses and applications.

Mesh Strainers

Bag filter housings may be fitted with SS 316 mesh lined strainers in place of baskets to convert them to strainer filters.Mesh strainers are available in four standard sizes: 01, 02, 03, and 04. Micron ratings are 25, 50, 100, 150, 250, 400, and 800 m, respectively.

Miscellaneous

Gauges, vents, eye-bolts, clamp-screws, V-clamps, center-bolts, butterfly and ball valves are all available as accessories or spare parts to fit Eaton’s various bag filter housings.

Bag Hold-Down Rings

ECOLINE™, SIDELINE™, FLOWLINE™, POLYLINE™, and MAXILINE™ MBF bag filter housings are fitted with different bag hold-down rings (included with housing). They hold the filter bag securely inside the restrainer basket, which in turn is positioned correctly within the housing.

03

02

01 07

04

08

09

10

11

06

05

/////////////////////////////////////////////////////

SPLASH GUARD option for added safety

Helps protect operators from unexpected pressurized spray and discharge

Reduces operator exposure to potentially hazardous material

Provides additional eye and face protection

Documents

Bag Filtration Systems