Upload
others
View
7
Download
0
Embed Size (px)
Citation preview
Syllabus PEOPLE’S UNIVERSITY, BHOPAL
(Applicable for Admitted from Academic Session 2019-20 onwards)
Programme: Bachelor of Technology Semester –III
School of Research and Technology Department: Mechanical Engineering
Subject
Code Subject Title Credit Theory Practical
BT-1301 Engineering
Mathematics-II
L T P
External
(70)
Internal
(30)
Total
(100)
External
Internal
Total
3 1 - Min: 40
(D Grade) Nil Nil Nil
Duration of Theory (Externals): 3 Hours
Theory Internal- Max Marks: 30 Best of Two Mid Semester Test –
Max Marks: 20
Assignment/Quiz/Attendance -
Max. Marks: 10
Practical Internal Max Marks: Nil
Lab work & Session –
Max Marks: Nil
Assignment / Quiz/Attendance -
Max. Marks: Nil
Pre-Requisite Fundamental knowledge of mathematics such as Algebra and Trigonometry
Course Outcome
1. Experience mathematics outside of your regular course work.
2. Use knowledge and skills necessary for immediate employment or acceptance into a graduate
program.
3. Maintain a core of mathematical and technical knowledge that is adaptable to
changing technologies and provides a solid foundation for future learning.
Unit Contents (Theory) Marks
Weightage
I Fourier Series: Introduction of Fourier series, Fourier series for Discontinues Functions, Fourier
series for even and odd function, half range sine and cosine series and Fourier transform. 14
II
Laplace Transformations : Introduction of Laplace Transform of elementary functions,
Properties of Laplace transform ,Change of scale property, shifting property, Laplace transform
of the derivative, Inverse Laplace transform and its properties, Convolution theorem and
Applications of Laplace Transformation to solve the ordinary differential equations
14
III
Second Order Linear Differential Equations with Variable Coefficients: Methods one
integral is known, removal of first derivative, changing of independent variable and variation of
parameter, Solution by Series Method. 14
IV
Linear & Non Linear Partial Differential Equations of First Order : Formulation of partial
differential equations, solution of equation by direct integration, Lagrange’s Linear equation,
Non linear partial differential equation and Charpit’s method, Linear homogeneous and Non-
homogeneous partial differential equation of second and higher order with constant coefficients.
14
V
Vector Calculus : Differentiation of vectors, scalar and vector point function, geometrical
meaning of Gradient, Unit Normal vector and directional derivative, physical interpretation of
divergence and curl, line integral, surface integral and volume integral, Green’s Stroke’s and
Gauss divergence theorem.
14
Text Book/References Books/ Websites:
1. D.C. Aggarwal “Engg. Mathematics – II”
2. BS Grewal; Higher Engineering Mathematics; Khanna Publication.
3. S.Arumungam; Mathematics for Engineers; SCITECH Publications.
4. Erwin Kreyszig; Advanced Engineering Mathematics; Wiley India.
5. D.G.Guffy; Advance Engineering Mathematics; Tata McGraw Hills.
6. S S Sastri; Engineering Mathematics; P.H.I.
7. Peter V.O’Neil; Advanced Engineering Mathematics; Thomson Learning
8. John Bird; Higher Engineering Mathematics; Elsevier
Suggested List of Laboratory Practical (Expandable): Nil
Syllabus PEOPLE’S UNIVERSITY, BHOPAL
(Applicable for Admitted from Academic Session 2019-20 onwards)
Programme: Bachelor of Technology Semester –III
School of Research and Technology Department: Mechanical Engineering
Subject
Code Subject Title Credit Theory Practical
MET-1302 Applied
Thermodynamics
L T P
External
(70)
Internal
(30)
Total
(100)
External
Internal
Total
3 1 - Min: 40
(D Grade) Nil Nil Nil
Duration of Theory (Externals): 3 Hours
Theory Internal- Max Marks: 30 Best of Two Mid Semester Test –
Max Marks: 20
Assignment/Quiz/Attendance
Max. Marks: 10
Practical Internal Max Marks: Nil
Lab work & Sessional –
Max Marks: Nil
Assignment / Quiz/Attendance
Max. Marks: Nil
Pre-Requisite Nil
Course Outcome 1. Ability to understand the basic concept of heat and temperature and its properties.
2. Students will able to define the ideal gas and state the ideal gas relation.
3. Students will be able to solve the problems of steam Turbine and Boilers.
Unit Contents (Theory) Marks
Weightage
I
Fundamental Concepts & Definitions: microscopic& macroscopic, introduction of
engineering thermodynamic Systems, Characteristics of system boundary and control surface,
Thermodynamic properties, Thermodynamic state, point, path and process, quasi-static
process, cyclic and non-cyclic; processes; Thermodynamic equilibrium, Zeroth law of
thermodynamics, Temperature; concepts, scales.
14
II
Work and Heat: Mechanics, definition & their limitations, sign convention. Displacement
work; as a part of a system boundary, as a whole of a system boundary, expressions for
displacement work in various processes through p-v diagrams. Shaft work; Heat Transfer;
definition, units and sign convention, Heat transfer in various processes through p-v diagrams.
Numerical.
14
III
Law of Thermodynamics: First Law of Thermodynamics: Joules experiments, equivalence of
heat and work. Statement of the First law of thermodynamics, extension of the First law to non
- cyclic processes, energy, energy as a property, modes of energy, Specific heat, enthalpy at
constant volume, constant pressure, steady state-unsteady flow energy equation. Numerical,
Second Law of Thermodynamics: Heat Pump, Heat Engines, Refrigerator, Thermal Reservoir,
schematic representation and efficiency, coefficients of performance. Limitations of first law of
thermodynamics, Kelvin - Planck statement; PMM I and PMM II, Clausius statement,
Equivalence of the two statements; Reversible and irreversible processes; factors that make a
process irreversible, reversible heat engines, Carnot cycle, Carnot principles. Numericals
14
IV
Entropy: Clausius inequality; Statement, proof, application to a reversible cycle. Entropy,
change of entropy, principle of increase in entropy, entropy as a quantitative test for
irreversibility, Available and unavailable energy.
Pure Substances: T-S, H-S and P-V diagrams, triple point and critical points. Sub cooled
liquid, saturated liquid, mixture of saturated liquid and vapour, saturated vapour and
superheated vapour states of pure substance with water as example. PVT diagram, Enthalpy of
change of phase (Latent heat). Dryness fraction, representation of various processes of steam
on these diagrams. Steam tables and its use. Separating and throttling calorimeter
14
V
Thermodynamic Relationships: Helmholtz and Gibbs functions, isothermal compressibility,
Differential relations of internal energy, Maxwell’s Relation, T-ds equations, Clapeyron
equation, Joule Thomson's coefficients.
14
Syllabus PEOPLE’S UNIVERSITY, BHOPAL
(Applicable for Admitted from Academic Session 2019-20 onwards)
Programme: Bachelor of Technology Semester –III
School of Research and Technology Department: Mechanical Engineering
Equation of state: Ideal gas equation of state, Real gas deviation with ideal gas, limitations of
ideal gas equation, Vander waals equation, Evaluation of its Constants, Limitations of the
equation.
Text Book/References Books/ Websites:
1. A.Venkatesh; Basic Engineering Thermodynamics; Universities Press.
2. P.K.Nag ; Basic and Applied Thermodynamics 2nd Ed.; Tata McGraw Hill Pub.
3. Arora and Domkundwar ; Thermodynamics; Dhanpat Prakashan
4. J.B.Jones and G.A.Hawkins ; Engineering Thermodynamics; John Wiley and Sons.
5. G.J.Van Wylen and R.E.Sonntag; Fundamentals of Classical Thermodynamics; Wiley Eastern.
6. Y.V.C.Rao; An Introduction to Thermodynamcis; Wiley Eastern.
7. B.K Venkanna, Swati B. Wadavadagi ; Basic Thermodynamics, PHI, New Delhi.
Suggested List of Laboratory Experiments :-(Expandable):
1. Study of Convergent / Divergent Nozzles.
2. To determine the flow rate using convergent nozzle.
3. Study of Cochran boiler
4. Study of Babcock and Wilcox Boiler
5. Numerical on vapour processes and ideal gas processes (minimum two problems on each)
6. Study of fuel pump
7. Study fuel injector
8. Study of Carburetor
9. Study of steam turbine.
10. To Study the Rankine Cycler Power Plant
11. Study of the processes of Heat Engine
12. To investigate the first law and Second law of thermodynamic using heat Engine
Syllabus PEOPLE’S UNIVERSITY, BHOPAL
(Applicable for Admitted from Academic Session 2019-20 onwards)
Programme: Bachelor of Technology Semester –III
School of Research and Technology Department: Mechanical Engineering
Subject
Code Subject Title Credit Theory Practical
MET-1303 Mechanics of
Materials
L T P
External
(70)
Internal
(30)
Total
(100) External
(35)
Internal
(15)
Total
(50)
3 1 1 Min: 40
(D Grade)
Min: 20
(D Grade)
Duration of Theory (Externals): 3 Hours
Theory Internal- Max Marks: 30 Best of Two Mid Semester Test –
Max Marks: 20
Assignment/Quiz/Attendance-
Max. Marks: 10
Practical Internal Max Marks: 15
Lab work & Sessional –
Max Marks: 10
Assignment / Quiz/ Attendance
Max. Marks: 05
Pre-Requisite Nil
Course Outcome 1. Apply knowledge of stress distributions to calculate stresses in structures under combined
loading.
2. Develop an understanding of normal and shear stress and strain.
3. Ability to calculate stress and angular deflection of Torsionally-loaded structures.
Unit Contents (Theory) Marks
Weightage
I
Introduction : Mechanical Properties of Materials, Behavior of Materials Under Tension,
Compression, Bending, Shear; Ductile and Brittle Materials& their Failure under Tension,
Stress-Strain Diagram, Hooke’s Law, Modulus of Elasticity, Stresses in the Components
Subjected to axial Multi-loads, Deformation under Axial Loading, Analysis of Simple
Structures, Stepped Rods, Members in Series and Parallel, Elastic and Plastic Behavior of
Materials, Poisson’s Ratio, Bulk Modulus, Shear Strain, Relation Among Elastic Constants,
Residual Stress, Temperature Stresses, Factor of Safety.
14
II
Principal Stresses and Strain: Transformation of Stresses, Principal Stresses, Normal And
Shear Stress, Torsion & Axial Loads, Mohr’s Circle and its Application to Two and Three
Dimensional Analysis, Principal Strains , Strain Energy.
Thin cylindrical shells: hoop or circumferential stress, longitudinal stress, maximum shear
stress, change in dimensions of thin cylindrical shell due to internal fluid pressure, thin
cylindrical shell with hemispherical ends, spherical shells.
14
III
Shear Force & Bending Moment: Types of Beam & Support, Theory of Simple Bending,
Bending Equation, Traverse Shear Stress Distribution in Circular, Hollow Circular, I &T
Section, Shear Force And BM Diagram, Pure Bending, point of contra- flexure.
Deflection Of Beam: Relation Between Slope, Deflection and Radius of Curvature, Solution
of Beam Deflection (simply supported beam only), Problem by Macaulay’s Method, Moment
Area Method.
14
IV
Torsion: Deformation in Circular Shaft, Angle of Twist, Shafts Angular Deflection, Hollow
and Stepped Circular Shaft.
Springs: Types of spring, analysis of close coiled and open coiled helical springs, leaf spring,
springs in series and parallel.
14
V
Theories of Failures: Maximum Normal Stress & Shear Stress Theory; Maximum Normal
And Shear Strain Energy Theory; Maximum Distortion Energy Theory; Application of
Theories to Different Materials And Loading Conditions
Columns and Struts: Stability of Structures, Euler’s Formula for Columns With Different End
Conditions, and Rankin’s Formula.
14
Syllabus PEOPLE’S UNIVERSITY, BHOPAL
(Applicable for Admitted from Academic Session 2019-20 onwards)
Programme: Bachelor of Technology Semester –III
School of Research and Technology Department: Mechanical Engineering
Text Book/References Books/ Websites
1. Andrew Pytel, Fedrinand L.Singer; Strength of Material; Addison Wesley Longman Inc.
2. G.H.Ruder; Strength of Material; ELBS with Macmillan third edition.
3. B.K.Sarkar, Strength of Material ; Tata McGraw hill New Delhi.
4. Dr. R. K.Bansal; A Text Book strength of Material; Laxmi Publication New Delhi.
5. S Ramamrutham, Strength of Material; Dhanpat Rai & Publication New Delhi.
6. R.S.Khurmi; Strength of Material; S.Chand Company Ltd. Delhi.
Suggested List of Laboratory Experiments (Expandable):-
1. Study and demonstration of Universal Testing Machine & its attachments.
2. Drawing sheet on shear force & bending Moment diagrams for a given loading (At least four
problems.).
3. Tension Test on mild steel, Aluminium & compression test on cast iron on UTM.
4. Direct Shear Test of mild steel on Universal Testing Machine.
5. Brinell Hardness Test on Mild Steel.
6. Rockwell hardness Test on Hardened Steel.
7. Izod & Charpy - Impact tests of a standard specimen.
8. Torsion Test on Mild steel bar.
Syllabus PEOPLE’S UNIVERSITY, BHOPAL
(Applicable for Admitted from Academic Session 2019-20 onwards)
Programme: Bachelor of Technology Semester –III
School of Research and Technology Department: Mechanical Engineering
Subject
Code Subject Title Credit Theory Practical
MET-1304 Material
Science
L T P
External
(70)
Internal
(30)
Total
(100)
External
(35)
Internal
(15)
Total
(50)
3 1 1 Min: 40
(D Grade)
Min: 20
(D Grade)
Duration of Theory (Externals): 3 Hours
Theory Internal- Max Marks: 30 Best of Two Mid Semester Test –
Max Marks: 20
Assignment/Quiz/Attendance-
Max. Marks: 10
Practical Internal Max Marks: 15
Lab work & Sessional –
Max Marks: 10
Assignment / Quiz/Attendance
Max. Marks: 05
Pre-Requisite Nil
Course Outcome 1. Classify the materials and suggest testing methodologies for the characterization of different
categories of materials.
2. Understand the basic properties that characterize the behavior of materials.
3. Select appropriate type of material for specific applications and engineering practice.
Unit Contents (Theory) Marks
Weightage
I
Structure of Materials: and crystallization, electronic structure of atoms, Crystalline
structure of solid: Concept of unit cell and space lattice, correlation of crystal structure , miller
indices , defects in crystal, point line and surface, defects, Dislocations edge and core, burgers
vectors, slip plane, ,material properties, super conductivity yielding and strain hardening.
Baushinger effect, grain boundaries, grain growth, effect of grain size on properties of metals.
14
II
Phase Diagrams: Theory of alloying, phases in metals and alloys, solid solution,
solidification of pure metals and alloys, ordered and disordered, substitution and interstitial
solution. Hume Rothery’s rules of substitution solid solution Phase diagrams of monotectic,
eutectic, eutectoid, peritectic and peritectoid & other systems. Mechanical properties, binary
equilibrium diagram, phase rule, lever rule.
14
III
Heat treatment and surface treatment; Introduction, purpose of heat treatment, effects of
heat treatment on properties of materials, allotropy of iron, iron carbon phase diagram, T.T.T.
diagrams, continuous cooling curves, classification, annealing normalizing, hardening,
spheriodizing, tempering transformation during tempering austempering martempering,
precipitation hardening, case carburizing, nitriding, cyaniding, carbonitriding, induction
hardening, flame hardening, and hardenability.
14
IV
Ceramics: Introduction, nature, types & properties, mechanical behavior of ceramics, glass;
their types properties& uses, abrasives, insulators, refractory; their properties &
classifications, uses; refractory materials.
14
V Polymers: Classifications & applications, molecular structure, polymerization, copolymers,
cross linking of polymers deformation &behaviors of polymers, visco-elasticity 14
Text Book/References Books/ Websites:
1. K. Hazra Choudhury, Material Science & Processes.
2. O. P. Khanna, A Textbook of Material Science and Metallurgy.
3. William D Callister Jr, Material Science and Engineering, John Wiley and Sons, New York.
4. Raghavan V, Material Science and Engineering – A First Course, Prentice Hall of India, New Delhi.
5. Nayak S.P.,Metallurgy for engineering.
6. R.K.Jain , Production Technology, Khanna Publishers.
Syllabus PEOPLE’S UNIVERSITY, BHOPAL
(Applicable for Admitted from Academic Session 2019-20 onwards)
Programme: Bachelor of Technology Semester –III
School of Research and Technology Department: Mechanical Engineering
Suggested List of Laboratory Experiments:- (Expandable):
1. To study crystal structures of a given specimen.
2. To study crystal imperfections in a given specimen.
3. To study microstructures of metals/ alloys.
4. To study heat treatment processes (hardening and tempering) of steel specimen.
5. To study microstructure of heat-treated steel.
6. To study the creep behavior of a given specimen.
7. To study the mechanism of chemical corrosion and its protection.
8. To study the properties of various types of plastics.
9. To study Bravais lattices with the help of models.
10. To study crystal structures and crystals imperfections using ball models.
Syllabus PEOPLE’S UNIVERSITY, BHOPAL
(Applicable for Admitted from Academic Session 2019-20 onwards)
Programme: Bachelor of Technology Semester –III
School of Research and Technology Department: Mechanical Engineering
Subject
Code
Subject
Title Credit Theory Practical
MET-1305 Machine
Drawing
L T P
External
(70)
Internal
(30)
Total
(100) External
(35)
Internal
(15)
Total
(50)
3 1 1 Min: 40
(D Grade)
Min: 20
(D Grade)
Duration of Theory (Externals): 4 Hours
Theory Internal- Max Marks: 30 Best of Two Mid Semester Test –
Max Marks: 20
Assignment/Quiz/Attendance
Max. Marks: 10
Practical Internal Max Marks: 15
Lab work & Sessional –
Max Marks: 10
Assignment / Quiz/Attendance
Max. Marks: 05
Pre-Requisite Engineering Drawing.
Course Outcome
1. Student should be able to Use IS convention of representing various machine components.
2. Interpret drawings and the assembly of a given set of details of machine components.
3. Know the significance & use of tolerances of size, forms & positions.
Unit Content (Theory) Marks
Weightage
I
Drawing conventions: drawing and dimensioning IS codes, Conventional representation of
surface finish, Roughness number symbol, Symbols of Machine elements and welded joints.
Limits, Fits and Tolerances: Nominal size and basic dimensions, Definitions, Basis of fit or
limit system, Systems of specifying tolerances, Designation of holes, Shafts and fits,
Commonly used holes and shafts.
Fasteners: Drawings of various views of Screw threads, metric and BSW threads, Square
thread and multi-start threads. Nut bolts, Washers, Setscrew, Locknuts and foundation bolts.
Riveted joints: Forms and proportions of river heads, Different views of different types of
riveted Lap and Butt joints.
14
II Drawings of various views (Sectioning) of Machine Elements: Cotter joint, Knuckle joint,
Muff and Flange coupling. Shaft bearing: Solid and bush bearing, Plummer block, Footstep
bearing. Pipe joint: Flanged joint, Socket and Spigot joint.
14
III Assembly Machine Drawing: Basic concept, plotting technique, assembly and blow up of
parts, bill of materials, product data; Cotter and Knuckle joints, pedestal and footstep
bearings, crosshead, stuffing box, IC engines parts - piston and connecting rods; lathe parts.
28
IV
Basic design concepts, design process, stages/phases in design, flowchart, problem
formulation, design considerations (strength, manufacturing, maintenance, environment,
economics and safety); design for recycle and reuse, Design and safety factors for steady and
variable loads, impact and fatigue considerations, reliability and optimization,
standardization in design. Introduction to Compute Aided Drafting software for 2D and 3D
Modelling.
14
Text Book/References Books/ Websites:
1. N.D.Bhatt; Mechanical Drawing; Dhanpat Prakashan.
2. P.S.Gill; Mechanical Drawing; P.S.Gill S.K. Kataria & Sons.
3. K.L. Narayana, P. Kannaiah, k.V. Reddy; Machine Drawing; New Age Publications.
4. R.K.Dhawan ; Mechanical Drawing; S. Chand Publication.
Syllabus PEOPLE’S UNIVERSITY, BHOPAL
(Applicable for Admitted from Academic Session 2019-20 onwards)
Programme: Bachelor of Technology Semester –III
School of Research and Technology Department: Mechanical Engineering
Suggested List of Laboratory Experiments:- (Expandable):
Prepare drawing sheets on following topics.
1. Types of line, and Dimensioning System.
2. Sheet of Tolerance Symbols, Positioning, Surface Finishing and Welding Symbols.
3. Use first angle method of projection, Orthographic projects (One Sheet containing atleast two
problems and atleast four problems for home assignment).
4. Sectioning views: projects (One Sheet containing atleast two problems and atleast four problems
for home assignment).
5. Conventional Representation as per SP – 46 (1988) - one sheet.
6. Details to Assembly: Draw sheets covering assembly drawing and its details for given machine
parts.
7. One sheet of Gear terminology and construction of involutes gear profile.
8. Pipe fitting and pipe layout: C.I. and PVC.
9. Two problems on assembly drawings using any CAD Package.
Syllabus PEOPLE’S UNIVERSITY, BHOPAL
(Applicable for Admitted from Academic Session 2019-20 onwards)
Programme: Bachelor of Technology Semester –III
School of Research and Technology Department: Mechanical Engineering
Duration of Theory (Externals): Nil
Theory Internal- Max Marks: Nil Best of Two Mid Semester Test –
Max Marks: Nil
Assignment/Quiz/Attendance
Max. Marks: Nil
Practical Internal Max Marks: 15 Lab work & Sessional –
Max Marks: 10
Assignment/ Quiz/Attendance
Max. Marks: 05
Pre-Requisite Students have basic knowledge of programming.
Course Outcome 1. An understanding of the concepts of inheritance and polymorphism.
2. An understanding basic concepts of C++ programming.
3. An ability to incorporate exception handling in object-oriented programs.
Unit Contents (Theory) Marks
Weightage
I
C++ Basics: Structure of a C++ program, Data types, Declaration of variables,
Expressions, Operators, Operator Precedence, Evaluation of expressions, Type
conversions, Pointers, Arrays, Strings, Structures, conditional statement, control structure,
switch-case, break, go to statements.OOPS :Introduction to OOPS, differences Between
OOP and Procedure Oriented Programming, Overview of OOP principles.Function &
Classes:Scope of variables, Parameter passing, Default arguments, inline function,
Recursive function, Dynamic memory allocation and reallocation, operators-new and
delete, Preprocessor directives,Classes:Class Definition, Class Structure, Class
Scope,object, Friends to a class, Static class members,Constructors and Destructors,
Dynamic creation and destruction of objects, Data Abstraction.Inheritance:
Inheritance,Defining a class hierarchy, Different forms of inheritance, Defining the Base
and Derived classes, Access to the base class member.Polymorphism:Function
overloading, Operator Overloading , Virtual Function Polymorphism: Static and Dynamic
binding, Base and Derived class virtual functions, Pure virtual functions, Abstract classes,
C++ Exception Handling and File Handling, Comparison of C++ with C, Java and C#.
50
Text Book/References Books/Websites:
1. E. Balaguruswamy;Object Oriented programming with C++; TMH, 2001.
2. Yashwant Kanitkar; Let us C++ .
3. Radha Ganesan;Object Oriented Programming with C++”; Scitech Publication PVT.LTD. Chennai.
4. Padam Gulwani & Anshuman Sharma;Elementary Concepts of Computer Design and Hardware.
Suggested List of Laboratory Experiments :- (Expandable):
1. Program to print any Message.
2. Program for Conditional Statements, Looping Statements and Switch Case.
3. Program to implement Arrays, Strings and Pointers.
4. Program to implement Functions and Dynamic Memory Allocation.
5. Program to implement Class and Objects.
6. Program to implement Friend Functions and Constructors.
7. Program for Inheritance.
8. Program for Polymorphism.
9. Program for File Handling.
10. Program for Exception Handling.
Subject
Code Subject Title Credit Theory Practical
BT-1306 C++
Programming
L T P
External
(Nil)
Internal
(Nil)
Total External
(35)
Internal
(15)
Total
(50)
- - 1 Nil Min: 20
(D Grade)
Syllabus PEOPLE’S UNIVERSITY, BHOPAL
(Applicable for Admitted from Academic Session 2019-20 onwards)
Programme: Bachelor of Technology Semester –III
School of Research and Technology Department: Mechanical Engineering
Subject
Code Subject Title Credit Theory Practical
BT-1307 Professional
Skills
L T P
External
(Nil)
Internal
(Nil)
Total External
(Nil)
Internal
(50)
Total
(50)
- - 1 Nil Min: 20
(D Grade)
Duration of Theory (Externals): Nil
Theory Internal- Max Marks: Nil Best of Two Mid Semester Test
–Max Marks: Nil
Assignment/Quiz/Attendance
Max. Marks: Nil
Practical Internal Max Marks: 50
Lab work & Sessional –
Max Marks: Nil
Assignment / Quiz/ Attendance
Max. Marks: 50
Pre-Requisite Nil
Course Outcome Able to solve problems ask in the competitive exams.
Unit Contents (Theory) Marks
Weightage
I Social Skills: Society, Social Structure, Develop Sympathy And Empathy.
SWOT Analysis: – Concept, How to make use of SWOT.
50
II Inter personal Relation: Sources of conflict, Resolution of conflict; Ways to enhance
interpersonal relations.
III • Quantitative Aptitude: Percentages/Profit & Loss, Time and Work, Simple and Compound
Interest, Series and Progression.
IV • Reasoning : Puzzles and Seating Arrangement, Data Sufficiency, Coding-decoding, Blood
Relation, Order and Ranking, Alpha Numeric Symbol Series, Logical Reasoning:
V English: free quizzes related to Synonyms, Antonyms, One Word Substitution, Idioms and
Phrases, Spelling Correction; Fill in the Blanks and Common Errors in English.
Text Book/References Books/ Websites:
1. Allen Pease; Body Language; Sudha Publications Pvt. Ltd.
2. E.H. Mc Grath , S.J. Pretice ;Basic Managerial Skills for All ;Hall of India, Pvt Ltd.
3. R.S. Aggarwal; Quantitative Aptitude for Competitive Examinations.
4. Arihant Publications; Fast Track Objective Arithmetic.
5. R S Aggarwal; Verbal and Nonverbal Reasoning.
6. M K Pandey; Analytical Reasoning.
7. SP Bakshi; Objective General English.
8. Neetu singh; Plinth to paramount English.
9. https://www.playquiz2win.com/engquizmenu.html
10. https://www.sawaal.com
Suggested List of Laboratory Experiments :- (Expandable):
1. SWOT analysis: - Analyze yourself with respect to your strength and weaknesses, opportunities and
threats. Following points will be useful for doing SWOT.
a) Your past experiences,
b) Achievements,
c) Failures,
d) Feedback from others etc.
Syllabus PEOPLE’S UNIVERSITY, BHOPAL
(Applicable for Admitted from Academic Session 2019-20 onwards)
Programme: Bachelor of Technology Semester –III
School of Research and Technology Department: Mechanical Engineering
2. Undergo a test on reading skill/memory skill administered by your teacher.
3. Form a group of 5-10 students and do works for social cause e.g. tree plantation, blood donation,
environment protection, camps on awareness like importance of cleanliness in slump area, social
activities, like giving cloths to poor etc. (One activity per group).
4. Students should solve various problems and quiz on the above mention topics, and prepare a
assignment.
Syllabus PEOPLE’S UNIVERSITY, BHOPAL
(Applicable for Admitted from Academic Session 2019-20 onwards)
Programme: Bachelor of Technology Semester –III
School of Research and Technology Department: Mechanical Engineering
Subject
Code Subject Title Credit Theory Practical
MET-1308
Mechanical
Engineering
Software Lab-I
L T P
External
(Nil)
Internal
(Nil)
Total External
(35)
Internal
(15)
Total
(50)
- - 1 Nil Min: 20
(D Grade)
Duration of Theory (Externals): -Nil
Theory Internal- Max Marks: -Nil Best of Two Mid Semester Test –
Max Marks: Nil
Assignment/Quiz/Attendance
Max. Marks: Nil
Practical Internal Max Marks: 50
Lab work & Sessional –
Max Marks: Nil
Assignment / Quiz/Attendance
Max. Marks: 50
Pre-Requisite Basic knowledge of software.
Course Outcome 1. Increase ability to communicate with people.
2. Learn to sketch and take field dimensions.
3. Learn to take data and transform it into graphic drawings.
Unit Contents (Theory) Marks
Weightage
I
Introduction to CAD
Introduction to Computer Aided Drafting software for 2D and 3D Modeling, benefit,
software’s basic commands of drafting entities like line, circle, polygon, polyhedron,
cylinders; transformations and editing commands like move, rotate, mirror, array.
• Practicing commands under Draw and Dimension Menu
• Practicing commands under Modify Menu.
• Practicing commands under Tool Menu.
• Practicing commands under Format Menu.
• Practicing commands under Express Menu.
50
Text Book/References Books/ Websites: Nil
Suggested List of Laboratory Experiments :- (Expandable):
Students should draw at least ten work sheets of machines parts by using AutoCAD command.