Click here to load reader

BA- ULTIMATE Piezo Scaler Don’t pull out the handpiece when the foot switch is stepped on and the machine is producing ultrasonic vibrations. Please don’t choose dry mode unless

  • View
    0

  • Download
    0

Embed Size (px)

Text of BA- ULTIMATE Piezo Scaler Don’t pull out the handpiece when the foot switch is stepped on and...

  • BA-ULTIMATE Piezo Scaler

    Copyright © 2009 by BA International Ltd. All rights reserved. No part of these instructions may be reproduced or copied in any form by any means – graphic, electronic or mechanical, including pho- tocopying, typing or information retrieval systems – without written permission of BA International Ltd.

  • BAC 100

    BA-ULTIMATE Piezo Scaler ULTRASONIC SCALER FOR USE IN PERIODONTIC AND PREVENTION TREATMENTS

    OPERATING MANUAL

    Rev.2016/10

  • Table of Contents 1. The installation and components of equipment 3

    1.1 Instructions.........................................................................................................................................3 1.2 Components .......................................................................................................................................3 1.3 The main technical specifications .........................................................................................................3 1.4 Installation of the main components ...................................................................................................4

    2. Product function and operation 6

    2.1 Scaling function (G) and periodontal function (P) ................................................................................6 2.2 Endodontic function (E).......................................................................................................................6 2.3 Water supply function thanks to the water bottle .................................................................................7

    3. Sterilization and maintenance 8

    3.1 Sterilization of detachable handpiece ..................................................................................................8 3.2 Cleaning of tips, endochuck, torque wrench and endo wrench ..............................................................8 3.3 Sterilization of scaling tips and endochuck and torque wrench..............................................................8

    4. Troubleshooting and notes 9

    5. Precautions 10

    5.1 Notice when using equipment ...........................................................................................................10 5.2 Contra-indications .............................................................................................................................10 5.3 Storage and maintenance .................................................................................................................10 5.4 Transportation ..................................................................................................................................11 5.5 Working condition ............................................................................................................................11

    6. After service 14

    7. Symbol instruction 15

    8. Environmental protection 15

    9. Manufacturer’s right 15

    2

    User's Manual for Ultrasonic Tips / Ultrasonic Scaler Tips Instructions 12

  • 1. The installation and components of equipment

    3

    E N

    G L IS

    H

    1.1 Instruction The Piezo Scaler is mainly used for teeth cleaning and also indispensable equipment for tooth disease prevention and treatment. The new product Piezo Scaler has scaling, periodontal, and endodontic functions. It has a tank of solution integrated with the follow features: 1. A water supply function thanks to a water bottle for an easier operation. 2. The inner water pipe is made from antiseptic material, solutions, such as Hydrogen peroxide, chlorhexidine and sodium Hypochlorite, etc, so that the performance of periodontal and endodontic is improved dramatically. 3. The handpiece is detachable and can be autoclaved to the temperature of 135°C and the pressure of 0,22 MPa. 4. Automatic frequency tracking ensures that the machine always works on the best frequency and performs more steadily.

    1.2 Components

    1.3 The main technical specifications • Power source input: 220-240 V ~ 50Hz/60Hz 150mA • Output primary tip vibration excursion:

  • 1.4 Installation of the main components • The front and back sketch map of the main unit.

    Power indicator

    Endodontic function

    Periodontal function

    Scaling function

    Dry function

    Water indicator

    Mode of water supply

    Options switch

    Decreasing power switch FIG. 1

    Socket for power supply

    Connetion for foot switch Power switch on/ off

    FIG. 2

    • Sketch map for connection of foot switch, adapter and main unit.

    Input voltage 220 to 240 V~

    Adapter

    Foot switch

    FIG. 3

    4

    1. The installation and components of equipment Water bottle

    Increasing power switch

    Water control knob

    BA-ULTIMATE Piezo Scaler

  • 5

    E N

    G L IS

    H

    1. The installation and components of equipment

    Joint of water bottle • Sketch map for connection of detachable handpiece.

    Interface Nipple of water bottle Seal

    Handpiece The connector of cable

    FIG. 4 Cable FIG. 5

    • Sketch map for how to install tip and endochuck with wrench. Screw on

    Tip

    Torque wrench

    Handpiece

    Endo wrench File Screw on

    Endochuck Screw on

    FIG. 6

    BA-ULTIMATE Piezo Scaler

  • 6

    2.1 Scaling function (G) and periodontal function (P) • Open the packing box, make sure that all the parts and accessories are complete according to the packing list. Take the main unit out of the box and put it on a stable plane. • Turn the water control knob to the max. • Insert the plug of the foot switch to its socket. (See figure 3) • Water way installation : * Water supply thanks to the water bottle : Install the bottle with adequate water or solution. * Outside water installation : Connect one end of the water pipe to the water entrance of the main unit, and the other end to the water source.

    • Connect the handpiece and the connector of cable correctly. • Insert the plug of the power source to its socket. • Switch on the main unit. - For the scaling function (G) the scaling indicator and the first five power indicators shine. - For periodontal function (P) the scaling indicator and the first three power indicators shine.

    • Press water button to choose of water function. The indicator of chosen mode is on. • Select a suitable scaling tip as you need then screw it on the handpiece tightly by the torque wrench. • Under the normal working state of the scaling tip, light touch and a certain to-and-fro motion will eliminate the tartar without heating. Overexertion and long-time lingering are forbidden. • Vibrating intensity : Adjust the power of the vibrations as you need. According to patient’s different sensitivity and the rigidity of the tartar, adjust the vibrating intensity during the clinical treatment. • Water volume adjust : Step on the foot switch, and the tip begins to vibrate, then turn the water control knob to form fine spray to cool down the handpiece and clean the teeth. • The handpiece must be handled in the same gesture as a pen in hand. • During the clinical treatment, be sure not to make the end of tip touch the teeth vertically and not to make the tip overexert in case of leading to a pain and damaging the tip. • After finishing operation, keep the machine working for 30 seconds on the water supply condition in order to clean the hand- piece and the scaling tip. • Unscrew the scaling tip and pull out handpiece, then sterilize them.

    Notice: Don’t pull out the handpiece when the foot switch is stepped on and the machine is producing ultrasonic vibrations. Please don’t choose dry mode unless needed in the treatment, please don’t make the machine work under dry mode for a long time. The teeth will be hurt in the handpiece and tips getting overheat during the treatment.

    2.2 Endodontic function (E) Usage process • Fix endochuck to handpiece by endo wrench. Screw it to the max. • Unscrew the screw cap on the endochuck. • Put the ultrasonic file into the hole at the bottom of endochuck.

    2. Installation and instruction for use BA-ULTIMATE Piezo Scaler