B. Tech in lectronics and Communication Engineering E ......B.Tech (ECE-CPS) SRM Institute of Science & Technology – Academic Curricula (2018 Regulations) 2 (e) Program Structure

B.Tech (ECE-CPS) SRM Institute of Science & Technology – Academic Curricula (2018 Regulations) 1

SRM INSTITUTE OF SCIENCE & TECHNOLOGY

Kattankulathur, Kancheepuram 603203, Tamil Nadu, India

B. Tech in Electronics and Communication Engineering (with Specialization in Cyber Physical System)

(a) Mission of the Department

Mission Stmt - 1 Build an educational process that is well suited to local needs as well as satisfies the national and international accreditation requirements

Mission Stmt – 2 Attract the qualified professionals and retain them by building an environment that fosters work freedom and empowerment.

Mission Stmt - 3 With the right talent pool, create knowledge and disseminate, get involved in collaborative research with reputed universities, and produce competent graduands.

(b) Program Educational Objectives (PEO) The Program Educational Objectives for the Electronics and Communication Engineering program describe accomplishments that graduates are expected to attain within a few years of graduation.

PEO – 1 Establish themselves as successful and creative practicing professional engineers, both nationally and globally, in the related fields of Electronics and Communication Engineering.

PEO – 2 Apply the acquired knowledge and skills in solving real-world engineering problems; develop novel technology and design products which are economically feasible and socially relevant.

PEO – 3 Develop an attitude of lifelong learning for sustained career advancement and adapt to the changing multidisciplinary profession.

PEO – 4 Demonstrate leadership qualities, effective communication skills, and to work in a team of enterprising people in the multidisciplinary and multicultural environment with strong adherence to professional ethics.

(c) Mission of the Department to Program Educational Objectives (PEO) Mapping

Mission Stmt. - 1 Mission Stmt. - 2 Mission Stmt. – 3

PEO - 1 H H H

PEO - 2 L M H PEO - 3 M L H PEO - 4 H H H

H – High Correlation, M – Medium Correlation, L – Low Correlation

(d) Mapping Program Educational Objectives (PEO) to Program Learning Outcomes (PLO) Program Learning Outcomes (PLO)

Graduate Attributes (GA) Program Specific Outcomes (PSO)

Eng

inee

ring

Kno

wle

dge

Pro

blem

Ana

lysi

s

Des

ign

&

Dev

elop

men

t

Ana

lysi

s, D

esig

n,

Res

earc

h

Mod

ern

Too

l Usa

ge

Soc

iety

& C

ultu

re

Env

ironm

ent &

S

usta

inab

ility

Eth

ics

Indi

vidu

al &

Tea

m

Wor

k

Com

mun

icat

ion

Pro

ject

Mgt

. &

Fin

ance

Life

Lon

g Le

arni

ng

Des

ign,

Pro

toty

pe

and

Tes

t Mod

ern

EC

E S

yste

ms

Pro

ject

Man

agem

ent

Tec

hniq

ues

Impl

emen

t EC

E

Sys

tem

s

PEO - 1 M H M H H H M

PEO - 2 H H H H H H M L H H L H

PEO - 3 M H M H L PEO - 4 H H H H H H L

H – High Correlation, M – Medium Correlation, L – Low Correlation Program Specific Outcomes (PSO) Graduates of baccalaureate degree program in ECE must demonstrate knowledge and hands-on competence in the ability to:

PSO – 1 Analyze and verify the correctness of CPS implementations against system requirements and timing constraints. PSO – 2 Design CPS requirements based on operating system and hardware architecture constraints.

PSO – 3 Implement specific software CPS using existing synthesis tools and analyze the functional behavior of CPS based on standard modeling formalisms.


(e) Program Structure for B.Tech in Electronics and Communication Engineering with Specialization in Cyber Physical System

1. Humanities & Social Sciences including Management Courses (H)

Course Course Hours/ Week

Code Title L T P C 18LEH101J English 2 0 2 3

18LEH102J Chinese

18LEH103J French

18LEH104J German 2 0 2 3 18LEH105J Japanese

18LEH106J Korean

18PDH101L General Aptitude 0 0 2 1

18PDH102T Management Principles for Engineers 2 0 0 2

18PDH103J Social Engineering 1 0 2 2 18PDH201L Employability Skills & Practices 0 0 2 1

Total Learning Credits 12

2. Basic Science Courses (B)


Code Title L T P C

18PYB101J Physics: Electromagnetic Theory, Quantum Mechanics, Waves and Optics

3 1 2 5

18CYB101J Chemistry 3 1 2 5 18MAB101T Calculus and Linear Algebra 3 1 0 4

18MAB102T Advanced Calculus and Complex Analysis 3 1 0 4

18MAB201T Transforms and Boundary Value Problems 3 1 0 4

18MAB203T Probability and Stochastic Process 3 1 0 4

18MAB302T Discrete Mathematics for Engineers 3 1 0 4 18BTB101T Biology 2 0 0 2


3. Engineering Science Courses (S)


Code Title L T P C

18MES101L Engineering Graphics and Design 1 0 4 3

18EES101J Basic Electrical and Electronics Engineering 3 1 2 5

18MES103L Civil and Mechanical Engineering Workshop 1 0 4 3 18CSS101J Programming for Problem Solving 3 0 4 5

18ECS201T Control Systems 3 0 0 3


4. Professional Core Courses (C)


Code Title L T P C

18ECC102J Electronic Devices 3 0 2 4

18ECC103J Digital Electronic Principles 3 0 2 4

18ECC104T Signals and Systems 3 1 0 4 18ECC105T Electromagnetics and Transmission Lines 3 0 0 3

18ECC201J Analog Electronic Circuits 3 0 2 4

18ECC202J Linear Integrated Circuits 3 0 2 4

18ECC203J Microprocessor, Microcontroller and Interfacing Techniques

3 0 2 4

18ECC204J Digital Signal Processing 3 0 2 4

18ECC205J Analog and Digital Communication 3 0 2 4

18ECC206J VLSI Design 3 0 2 4

18ECC301T Wireless Communications 3 1 0 4 18ECC302J Microwave & Optical Communications 3 0 2 4

18ECC303J Computer Communication Networks 3 0 2 4

18ECC350T Comprehension 0 1 0 1


5. Professional Elective Courses (E)


Code Title L T P C

Professional Elective – 1 3 0 0 3

Professional Elective – 2 3 0 0 3 Professional Elective – 3 3 0 0 3





6. Open Elective Courses (O)


Code Title L T P C

Open Elective – 1 3 0 0 3

Open Elective – 2 3 0 0 3 Open Elective – 3 3 0 0 3




7. Project Work, Seminar, Internship In Industry / Higher Technical Institutions (P)


Code Title L T P C

18ECP101L Massive Open Online Course- I

18ECP102L Industrial Training - I 0 0 2 1

18ECP103L Seminar – I

18ECP104L Massive Open Online Course- II

18ECP105L Industrial Training - II 0 0 2 1

18ECP106L Seminar – II

18ECP107L Minor Project 0 0 6 3

18ECP108L Internship (4-6 weeks)

18ECP109L Project 0 0 20 10

18ECP110L Semester Internship


8. Mandatory Courses (M)


Code Title L T P C 18PDM101L Professional Skills and Practices 0 0 2 0

18PDM201L Competencies in Social Skills 0 0 2 0

18PDM203L Entrepreneurial Skill Development

18PDM202L Critical and Creative Thinking Skills 0 0 2 0

18PDM204L Business Basics for Entrepreneurs 18PDM301L Analytical and Logical Thinking Skills

0 0 2 0 19PDM302L Entrepreneurship Management

18LEM101T Constitution of India 1 0 0 0

18LEM102J Value Education 1 0 1 0

18GNM101L Physical and Mental Health using Yoga 0 0 2 0 18GNM102L NSS

0 0 2 0 18GNM103L NCC

18GNM104L NSO

18LEM109T Indian Traditional Knowledge 1 0 0 0

18LEM110L Indian Art Form 0 0 2 0

18CYM101T Environmental Science 1 0 0 0

Total Learning Credits -

List of Professional Elective Courses (E) Any 6 Courses


Code Title L T P C

18ECE250T Principles of Cyber Physical System 3 0 0 3

18ECE251T Embedded and Implanted Devices for Cyber Physical System

3 0 0 3

18ECE252T Sensors and Actuators for Cyber Physical System

3 0 0 3

18ECE253T Unsupervised Intelligence in Cyber Physical System

3 0 0 3

18ECE254T Real Time Cyber Physical System 3 0 0 3

18ECE350T Cyber Physical Interface and Automation 3 0 3 3

18ECE351T High Performance Computing for Cyber Physical System

3 0 0 3

18ECE352T Cyber Physical Control System 3 0 0 3

18ECE353T Cyber Security 3 0 3 3

18ECE354T Cloud and Distributed Systems for Cyber Physical System

3 0 0 3

18ECE355T Design of Cyber Physical System 3 0 0 3

18ECE356T Mobile Cyber Physical System 3 0 0 3

List of Open Elective Courses (O) Any 4 Courses


Code Title L T P C

18ECO101T Short-Range Wireless Communication 3 0 0 3 18ECO102J Electronic Circuits & Systems 2 0 2 3

18ECO103T Modern Wireless Communication Systems 3 0 0 3

18ECO104J Audio and Speech Processing 2 0 2 3

18ECO105T Underwater Acoustics 3 0 0 3

18ECO106J PCB Design and Manufacturing 2 0 2 3 18ECO107T Fiber Optics and Optoelectronics 3 0 0 3

18ECO108J Embedded System Design using Arduino 2 0 2 3

18ECO109J Embedded System Design using Raspberry Pi

2 0 2 3

18ECO110J 3D Printing Hardware and Software 2 0 2 3

18ECO131J Virtual Instrumentation 2 0 2 3

18ECO132T Analytical Instrumentation 3 0 0 3

18ECO133T Sensors and Transducers 3 0 0 3

18ECO134T Industrial Automation 3 0 0 3 18ECO135T Fundamentals of MEMS 3 0 0 3

18ECO121T Basics of Biomedical Engineering 3 0 0 3

18ECO122T Hospital Information Systems 3 0 0 3

18ECO123T Biomedical Imaging 3 0 0 3

18ECO124T Human Assist Devices 3 0 0 3 18ECO125T Quality Control for Biomedical Devices 3 0 0 3

18ECO126T Sports Biomechanics 3 0 0 3


(f) Program Articulation for B.Tech in Electronics and Communication Engineering with Specialization in Cyber Physical System

Program Learning Outcomes (PLO)

Graduate Attributes PSO

Course Code

Course Name

Eng

inee

ring

Kno

wle

dge

Pro

blem

Ana

lysi

s

Des

ign

& D

evel

opm

ent

Ana

lysi

s, D

esig

n,

Res

earc

h

Mod

ern

Too

l Usa

ge

Soc

iety

& C

ultu

re

Env

ironm

ent &

S

usta

inab

ility

Eth

ics

Indi

vidu

al &

Tea

m W

ork

Com

mun

icat

ion

Pro

ject

Mgt

. & F

inan

ce

Life

Lon

g Le

arni

ng

PS

O-1

PS

O-2

PS

O-3

18ECS201T Control Systems H H - - - - - - - - - - H - -

18ECC102J Electronic Devices H - - H - - L H M - M L L -

18ECC103J Digital Electronic Principles H M H - H - - - H - - - M - L

18ECC104T Signals and Systems H H M M M - - - - - - - L - L

18ECC105T Electromagnetics and Transmission Lines M H - - - - - - - - L - M

18ECC201J Analog Electronic Circuits L M H - M - - - M - - M H L

18ECC202J Linear Integrated Circuits H M H - M - - - M - - - H L H

18ECC203J Microprocessor, Microcontroller and Interfacing Techniques M M M - H - - - - H - H L - M

18ECC204J Digital Signal Processing H M H - - - - - - - - - M - H

18ECC205J Analog and Digital Communication M H H M H - - - H H - M H M H

18ECC206J VLSI Design H M M - H - - - H M L M - - M

18ECC301T Wireless Communication H H H H M - - - - M - M M - H

18ECC302J Microwave & Optical Communications H H H M - - - - - - - - M - M

18ECC303J Computer Communication Networks - - M - L L M - - - - M - - H

18ECC350T Comprehension H H M L L L L L L L L L M M M

18ECP101L/ 18ECP104L

Massive Open Online Course-I/II - - - - - M L - - H - H - M -


Industrial Training-I/II H M M M M L M H H M H M L L L


Seminar-I/II - M M H - M H - - H - M - - -


Minor Project / Internship (4-6 weeks) H H H H M M H M M M M L M M M


Project / Semester Internship H H H H H H H H H H H H H H H

18ECE250T Principles of Cyber Physical System H M H M L L M - - - - - - - H

18ECE251T Embedded and Implanted Devices for Cyber Physical System H - - H H - - M - H - L M L -

18ECE252T Sensors and Actuators for Cyber Physical System H - H M - - L - - - - - H - M

18ECE253T Unsupervised Intelligence in Cyber Physical System H M H - - - L M H - - - L L M

18ECE254T Real Time Cyber Physical System H M H - - - - M H - - - H L -

18ECE350T Cyber Physical Interface and Automation H M M - - - - - - - - - - - H

18ECE351T High Performance Computing for Cyber Physical System H - M H - - - - - - - - M - M

18ECE352T Cyber Physical Control System H M H H - - - - - - - - H L -

18ECE353T Cyber Security H M H H - - M - - M - - H L -

18ECE354T Cloud and Distributed Systems for Cyber Physical System H M H - H - - - - - - L H L -

18ECE355T Design of Cyber Physical System H - M - - H H L L - - M L L -

18ECE356T Mobile Cyber Physical System H - H - M - - - - M - - M - L

H – High Correlation, M – Medium Correlation, L – Low Correlation, PSO – Program Specific Outcomes (PSO)


(g) Implementation Plan for B.Tech in Electronics and Communication Engineering with Specialization in Cyber Physical System

Semester - I

Code Course Title Hours/ Week

C L T P

18LEH102J- 18LEH106J

Foreign Language (Chinese/ French/ German/ Japanese / Korean)

2 0 2 3

18MAB101T Calculus and Linear Algebra 3 1 0 4 18CYB101J Chemistry 3 1 2 5

18CSS101J Programming for Problem Solving 3 0 4 5

18MES103L Civil and Mechanical Engineering Workshop 1 0 4 3

18PDM101L Professional Skills and Practices 0 0 2 0

18LEM102J Value Education 1 0 1 0 18GNM102L NCC / NSS / NSO 0 0 2 0


Semester – II


C L T P

18LEH101J English 2 0 2 3

18MAB102T Advanced Calculus and Complex Analysis 3 1 0 4

18PYB101J Physics: Electromagnetic Theory, Quantum Mechanics, Waves and Optics

3 1 2 5

18MES101L Engineering Graphics and Design 1 0 4 3

18EES101J Basic Electrical and Electronics Engineering 3 1 2 5

18PDH101L General Aptitude 0 0 2 1

18LEM101T Constitution of India 1 0 0 0 18GNM101L Physical and Mental Health using Yoga 0 0 2 0


Semester - III


C L T P 18MAB201T Transforms and Boundary Value Problems 3 1 0 4

18ECS201T Control Systems 3 0 0 3 18ECC102J Electronic Devices 3 0 2 4

18ECC103J Digital Electronic Principles 3 0 2 4

18ECC104T Signals and Systems 3 1 0 4

18ECC105T Electromagnetics and Transmission Lines 3 0 0 3

18PDH103J Social Engineering 1 0 2 2 18PDM201L Competencies in Social Skills 0 0 2 0

18CYM101T Environmental Science 1 0 0 0


Semester - IV


C L T P 18MAB203T Probability and Stochastic Process 3 1 0 4

18BTB101T Biology 2 0 0 2 18ECC201J Analog Electronic Circuits 3 0 2 4

18ECC202J Linear Integrated Circuits 3 0 2 4

Professional Elective-1 3 0 0 3

Open Elective-1 3 0 0 3

18PDH102T Management Principles for Engineers 2 0 0 2 18PDM202L Critical and Creative Thinking Skills 0 0 2 0


Semester - V


C L T P

18MAB302T Discrete Mathematics for Engineers 3 1 0 4

18ECC203J Microprocessor, Microcontroller and Interfacing Techniques

3 0 2 4

18ECC204J Digital Signal Processing 3 0 2 4

18ECC205J Analog and Digital Communication 3 0 2 4 Professional Elective – 2 3 0 0 3


18ECP101L/ 18ECP102L/ 18ECP103L

Massive Open Online Course-I / Industrial Training-I / Seminar-I

0 0 2 1

18PDM301L Analytical and Logical Thinking Skills 0 0 2 0

18LEM110L Indian Art Form 0 0 2 0


Semester - VI


C L T P

18ECC206J VLSI Design 3 0 2 4 18ECC302J Microwave and Optical Communications 3 0 2 4

18ECC303J Computer Communication Networks 3 0 2 4

18ECC350T Comprehension 0 1 0 1


Professional Elective-4 3 0 0 3 Open Elective-3 3 0 0 3

18ECP104L/ 18ECP105L/ 18ECP106L

Massive Open Online Course-II / Industrial Training-II / Seminar-II

0 0 2 1

18PDH201L Employability Skills and Practices 0 0 2 1

18LEM109T Indian Traditional Knowledge 1 0 0 0


Semester - VII


C L T P

18ECC301T Wireless Communications 3 1 0 4



Open Elective-4 3 0 0 3

18ECP107L / 18ECP108L

Minor Project / Internship (4-6 weeks) 0 0 6 3


Semester - VIII


C L T P

18ECP109L / 18ECP110L

Project / Semester Internship 0 0 20 10



B. Tech in Electronics and Communication Engineering

(with Specialization in Cyber Physical System)

2018 Regulations

Engineering Science Courses (S)

Department of Electronics and Communication Engineering SRM Institute of Science and Technology

SRM Nagar, Kattankulathur – 603203, Kancheepuram District, Tamilnadu


Course Code

18ECS201T Course Name

CONTROL SYSTEMS Course

Category Professional Core

L T P C

3 0 0 3

Pre-requisite Courses

18MAB102T Co-requisite

Courses 18ECC104T

Progressive Courses

Nil

Course Offering Department Electronics and Communication Engineering Data Book / Codes/Standards Nil

Course Learning Rationale (CLR): The purpose of learning this course is to: Learning Program Learning Outcomes (PLO)

CLR-1 : Learn about mathematical modeling techniques of mechanical and electrical systems 1 2 3 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 CLR-2 : Impart knowledge about the transient and steady state error and analysis

Leve

l of T

hink

ing

(Blo

om)

Exp

ecte

d P

rofic

ienc

y (%

)

Exp

ecte

d A

ttain

men

t (%

)

Eng

inee

ring

Kno

wle

dge

Pro

blem

Ana

lysi

s

Des

ign

& D

evel

opm

ent

Ana

lysi

s, D

esig

n, R

esea

rch

Mod

ern

Too

l Usa

ge

Soc

iety

& C

ultu

re

Env

ironm

ent &

Sus

tain

abili

ty

Eth

ics

Indi

vidu

al &

Tea

m W

ork

Com

mun

icat

ion

Pro

ject

Mgt

. & F

inan

ce

Life

Lon

g Le

arni

ng

PS

O–1

: Pro

fess

iona

l

Ach

ieve

men

t P

SO

– 2

: Pro

ject

Man

agem

ent

Tec

hniq

ues

PS

O –

3: A

naly

ze &

Res

earc

h

CLR-3 : Identify and analyze stability of a system in time domain using root locus technique

CLR-4 : Know about different frequency domain analytical techniques

CLR-5 : Acquire the knowledge of a controller for specific applications

CLR-6 : Impart knowledge on controller tuning methods

Course Learning Outcomes (CLO): At the end of this course, learners will be able to:

CLO-1 : Determine Transfer function of a system by mathematical modeling, block diagram reduction and signal flow graphs 1,2 80 80 H H - - - - - - - - - - H - -

CLO-2 : Identify the standard test inputs, time domain specifications and calculate steady state error 1,2 85 80 H H - - - - - - - - - - H - -

CLO-3 : Plot a root locus curve and analyze the system stability using Routh array 2,3 90 85 H H - - - - - - - - - - H - -

CLO-4 : Analyze the frequency domain specifications from bode and polar plots 2,3 90 85 H H - - - - - - - - - - H - -

CLO-5 : Design a closed loop control system for specific application 1,2,3 80 80 H H - - - - - - - - - - H - -

CLO-6 : Identification of controller parameters and tuning 1,2,3 85 85 H H - - - - - - - - - - H - -

Duration (hour)

9 9 9 9 9

S-1

SLO-1 Open and closed loop control system Standard test signals and their expression Poles and zeros of a system Frequency domain analysis Controllers-Significance and Need

SLO-2 Feedback and Feed forward control systems Type number and order of a system Pole zero plot and concept of s plane Frequency domain specifications Stability of closed loop systems

S-2 SLO-1

Transfer function of a system and basis of Laplace transforms

Transfer function of First order system for Step and ramp signal

Proper, Strictly Proper and Improper systems

Frequency domain plots, minimum and non minimum phase systems

SISO and MIMO control systems

SLO-2 Need for mathematical modeling Transfer function of First order system Impulse and parabolic signal

Characteristic equation Correlation between time and frequency domain

Types of controllers-ON-OFF,P,I,D

S-3

SLO-1 Representation of mechanical translational systems using differential equation and determination of transfer function

General transfer function of second order system

Concept of stability from pole zero location

Bode plot approach and stability analysis

Composite Controller-PI,PD and PID

SLO-2 Identification of damping factor and classification based on it

Need for Stability analysis and available techniques

Rules for sketching bode plot Controller parameters and tuning methods

S-4 SLO-1

Representation of mechanical rotational systems and determination of transfer function

Step response of critically damped second order system

Necessary and sufficient Condition for stability

Bode plot of typical systems Design Specification, controller configurations- ON-OFF controller

SLO-2 Step response of under damped second order system

Significance of Routh Hurwitz Technique

S-5

SLO-1 Conversions of Mechanical system to Electrical system

Step response of over damped second order system

Computation of Routh array

Bode plot of typical systems Design Specification, controller configurations-PID controller

SLO-2 f-V and f-I electrical analogies Step response of undamped second order system

Routh array of stable systems


S-6 SLO-1

Block diagram reduction rules and methodology

Time domain specifications and their significance

Routh array of Unstable systems Polar plot and significance Design of speed control system for DC motor

SLO-2 Numerical solution Routh array of Unstable systems Nyquist stability criterion

S-7 SLO-1

Evaluation of transfer function using block diagram reduction

Transient and steady state error analysis Root locus technique Sketching of polar plot on polar graphs

Design of control system for Twin Rotor Multi input Multi output System(TRMS) with one degree of freedom SLO-2 Static and dynamic Error coefficients Rules for sketching root locus

S-8 SLO-1

Signal flow graphs and evaluation of transfer function

Static error constants and evaluation of steady state error

Root locus plot of typical systems Polar plot of typical systems Case study 1 SLO-2

S-9 SLO-1

Block diagram to signal flow conversion Dynamic error constants and evaluation of steady state error

Root locus plot of typical systems Polar plot of typical systems Case study 2 SLO-2

Learning Resources

1. Nagrath.J and Gopal.M,, “Control System Engineering”, 5th Edition, New Age, 2007 2. Benjamin C Kuo, “Automatic Control System”, 9th edition, John Wiley & Sons, 2010

3. Gopal.M, “Control System Principles and Design”, 2nd Edition, TMH, 2002 4. Sivanandam and Deepa, “Control system Engineering using MATLAB”, 2nd edition, Vikas publishers, 2007

Learning Assessment

Bloom’s

Level of Thinking

Continuous Learning Assessment (50% weightage) Final Examination (50% weightage)

CLA – 1 (10%) CLA – 2 (15%) CLA – 3 (15%) CLA – 4 (10%)

Level 1 Remember

40% 30% 30% 30% 30% Understand

Level 2 Apply

40% 40% 40% 40% 40% Analyze

Level 3 Evaluate

20% 30% 30% 30% 30% Create

Total 100 % 100 % 100 % 100 % 100 %

# CLA – 4 can be from any combination of these: Assignments, Seminars, Tech Talks, Mini-Projects, Case-Studies, Self-Study, MOOCs, Certifications, Conf. Paper etc.,

Course Designers

Experts from Industry Experts from Higher Technical Institutions Internal Experts

1. Mr. Anuj Kumar, Bombardier Transportation, Ahmedabad, [email protected] 1. Dr. Meenakshi, Professor of ECE, CEG, Anna University, [email protected] Dr. T. Deepa, SRMIST

2. Mr. Hariharasudhan - Johnson Controls, Pune, [email protected] 2. Dr. Venkatesan, Sr. Scientist, NIOT, Chennai, [email protected] Mrs. R. Bakhya Lakshmi, SRMIST


B. Tech in Electronics and Communication Engineering (with specialization in Cyber Physical System)

2018 Regulations

Professional Core Courses (C)




Course Code

18ECC102J Course Name

ELECTRONIC DEVICES Course

Category C Professional Core

L T P C

3 0 2 4


18EES101J Co-requisite

Courses Nil

Progressive Courses

18ECC201J, 18ECC202J, 18ECE203T, 18ECE303T, 18ECE321T, 18ECE322T



CLR-1 : Provide a basis for understanding semiconductor material, how a pn junction is formed and its principle of operation 1 2 3 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

CLR-2 : Explain the importance of diode in electronic circuits by presenting appropriate diode applications

Leve

l of T

hink

ing

(Blo

om)

Exp

ecte

d P

rofic

ienc

y (%

)

Exp

ecte

d A

ttain

men

t (%

)

Eng

inee

ring

Kno

wle

dge

Pro

blem

Ana

lysi

s

Des

ign

& D

evel

opm

ent

Ana

lysi

s, D

esig

n, R

esea

rch

Mod

ern

Too

l Usa

ge

Soc

iety

& C

ultu

re

Env

ironm

ent &

Sus

tain

abili

ty

Eth

ics

Indi

vidu

al &

Tea

m W

ork

Com

mun

icat

ion

Pro

ject

Mgt

. & F

inan

ce

Life

Lon

g Le

arni

ng

PS

O–1

: Pro

fess

iona

l Ach

ieve

men

t

PS

O –

2: P

roje

ct M

anag

emen

t T

echn

ique

s

PS

O –

3: A

naly

ze &

Res

earc

h CLR-3 : Discuss the basic characteristics of several other types of diodes that are designed for specific applications

CLR-4 : Describe the basic structure, operation and characteristics of BJT, and discuss its use as a switch and an amplifier.

CLR-5 : Describe the basic structure, operation and characteristics of MOSFET, and discuss its use as a switch and an amplifier.

CLR-6 : Use modern engineering tools such as PSPICE to carry out design experiments and gain experience with instruments and methods used by technicians and electronic engineers


CLO-1 : Explain the operation, characteristics, parameters and specifications of semiconductor diodes and special diodes 1 60 70 H - - - - - - - - - - M - - -

CLO-2 : Illustrate important applications of semiconductor diodes and special diodes. 2 60 70 - - - - - - - - - - - M - - -

CLO-3 : Review bipolar transistor construction, operation, characteristics and parameters, as well as its application in amplification and switching.

1 60 70 H - - - - - - - - - - M - - -

CLO-4 : Review field-effect transistor construction, operation, characteristics and parameters, as well as its application in amplification and switching.

1 60 70 H - - - - - - - - - - M - L -

CLO-5 : Construct a circuit, then make functional measurements to understand the operating characteristics of the device / circuit. 3 70 75 - - - - H - - - - - - - L L -

CLO-6 : Solve specific design problem, which after completion will be verified using modern engineering tools such as PSPICE. 2 70 75 - - - - H - - L H M - M - - -

Duration (hour)

Semiconductor Diodes Diode Circuits Special Diodes Bipolar Junction Transistors MOS Field-Effect Transistors

15 15 15 15 15

S-1 SLO-1

Basic semiconductor theory: Intrinsic & extrinsic semiconductors

HWR operation, Efficiency and ripple factor Backward diode Physical structure Physical structure

SLO-2 Current flow in semiconductors Problem solving Varactor diode Device operation of BJT Device operation of E-MOSFET & D-MOSFET

S-2 SLO-1 PN junction theory: Equilibrium PN junction

Center-Tapped Transformer FWR operation, Efficiency and ripple factor

Step recovery diode Current-Voltage characteristics of CE BJT configuration

I-V characteristics of E-MOSFET

SLO-2 Forward biased PN junction Problem solving Point-contact diode Current-Voltage characteristics of CE BJT configuration

Problem solving

S-3 SLO-1 Reverse biased PN junction

Bridge FWR operation, Efficiency and ripple factor

Metal-semiconductor junction: Structure, Energy band diagram

Current-Voltage characteristics of CB BJT configuration

Derive drain current

SLO-2 Relation between Current and Voltage Problem solving Forward & Reverse Characteristics of Schottky Diode

Current-Voltage characteristics of CB BJT configuration

Problem solving

S 4-5

SLO-1 Lab 1: PN Junction Diode Characteristics Lab 4: Diode clipping and clamping circuits Lab 7: Series and Shunt Regulators

Lab 10: BJT and MOSFET Switching Circuits

Lab 13: Repeat Experiments SLO-2

S-6 SLO-1 Calculate depletion width Filters: Inductor & Capacitor Filters Tunnel Diode

Current-Voltage characteristics of CC BJT configuration

Derive transconductance

SLO-2 Calculate barrier potential Problem solving Tunnel Diode Current-Voltage characteristics of CC BJT configuration

Problem solving

S-7 SLO-1 Derive diode current equation Filters: LC & CLC Filters Gunn Diode BJT as an amplifier CMOS FET


SLO-2 Derive diode current equation Problem solving Gunn Diode BJT as a switch MOSFET as an amplifier

S-8 SLO-1

Effect of Capacitance in PN junction: Transition Capacitance

Diode Clippers IMPATT Diode BJT circuit models – h-parameter MOSFET as a switch

SLO-2 Diffusion Capacitance Problem solving IMPATT Diode BJT circuit models – hybrid-π parameter Problem solving

S 9-10

SLO-1 Lab 2: Zener diode characteristics Lab 5: BJT Characteristics Lab 8: MOSFET Characteristics

Lab 11: Photoconductive Cell, LED, and Solar Cell Characteristics

Lab-14: Model Examination SLO-2

S-11 SLO-1

Energy band structure of PN Junction Diode

Diode Clampers PIN Diode BJT biasing circuits and stability analysis: Base bias and emitter bias

Biasing Circuits for MOSFET: Gate Bias

SLO-2 Ideal diode and its current-voltage characteristics

Problem solving PIN Photodiode Problem solving Problem Solving

S-12 SLO-1 Terminal characteristics & parameters Voltage Multipliers Avalanche photodiode Voltage-divider bias Self-bias

SLO-2 Diode modeling Zener diode: Characteristics, breakdown mechanisms

Laser diode Problem solving Problem Solving

S-13 SLO-1 DC load line and analysis

Zener resistances and temperature effects Zener diode as voltage regulator

Problem solving Collector-feedback bias Voltage-divider bias

SLO-2 Problem solving Problem solving Problem solving Problem solving Problem Solving

S 14-15

SLO-1 Lab 3: Diode rectifier circuits Lab 6: BJT Biasing Circuits Lab 9: MOSFET Biasing Circuits

Lab 12: Simulation experiments using PSPICE

Lab 15: End-Semester Practical Examination SLO-2

Learning Resources

1. David A. Bell, Electronic Devices and Circuits, 5th ed., Oxford University Press, 2015 2. Donald Neamen, Electronic Circuits: Analysis and Design, 3rd ed., McGraw-Hill Education, 2011 3. Adel S. Sedra, Kenneth C. Smith, Microelectronic Circuits: Theory and Applications, OUP, 2014 4. Thomas L. Floyd, Electronic Devices”, 9th ed., Pearson Education, 2013

5. Robert L. Boylestad, Louis Nashelsky, Electronic Devices and Circuit Theory, 11th ed., Pearson Education, 2013 6. Muhammad Rashid, Microelectronic Circuits: Analysis & Design, 2nd ed., Cengage Learning, 2010 7. Muhammed H Rashid, Introduction to Pspice using OrCAD for circuits and electronics, 3rd ed., Pearson, 2004 8. Laboratory Manual, Department of ECE, SRM University

Learning Assessment

Bloom’s

Level of Thinking


CLA – 1 (10%) CLA – 2 (15%) CLA – 3 (15%) CLA – 4 (10%)#

Theory Practice Theory Practice Theory Practice Theory Practice Theory Practice

Level 1 Remember

20% 20% 15% 15% 15% 15% 15% 15% 15% 15% Understand

Level 2 Apply

20% 20% 20% 20% 20% 20% 20% 20% 20% 20% Analyze

Level 3 Evaluate

10% 10% 15% 15% 15% 15% 15% 15% 15% 15% Create

Total 100 % 100 % 100 % 100 % - # CLA – 4 can be from any combination of these: Assignments, Seminars, Tech Talks, Mini-Projects, Case-Studies, Self-Study, MOOCs, Certifications, Conf. Paper etc.,

Course Designers Experts from Industry Experts from Higher Technical Institutions Internal Experts

1. Mr. Anuj Kumar, Bombardier Transportation, Ahmedabad, [email protected] 1. Dr. Meenakshi, Professor of ECE, CEG, Anna University, [email protected] 1. Mr. Manikandan AVM, SRMIST

2. Mr. Hariharasudhan – Johnson Controls, Pune, [email protected] 2. Dr. Venkatesan, Sr. Scientist, NIOT, Chennai, [email protected] 2. Dr. Diwakar R Marur, SRMIST


Course Code


DIGITAL ELECTRONIC PRINCIPLES Course


L T P C

3 0 2 4



Courses Nil

Progressive Courses

18ECC203J, 18ECC206J, 18ECE206J



CLR-1 : Understand binary codes, digital arithmetic operations and able to simplify Boolean logic expressions 1 2 3 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

CLR-2 : Describe how basic TTL and CMOS gates operate at the component level

Leve

l of T

hink

ing

(Blo

om)

Exp

ecte

d P

rofic

ienc

y (%

)

Exp

ecte

d A

ttain

men

t (%

)

Eng

inee

ring

Kno

wle

dge

Pro

blem

Ana

lysi

s

Des

ign

& D

evel

opm

ent

Ana

lysi

s, D

esig

n, R

esea

rch

Mod

ern

Too

l Usa

ge

Soc

iety

& C

ultu

re

Env

ironm

ent &

Sus

tain

abili

ty

Eth

ics

Indi

vidu

al &

Tea

m W

ork

Com

mun

icat

ion

Pro

ject

Mgt

. & F

inan

ce

Life

Lon

g Le

arni

ng

PS

O–1

: Pro

fess

iona

l Ach

ieve

men

t

PS

O –

2: P

roje

ct M

anag

emen

t T

echn

ique

s

PS

O –

3: A

naly

ze &

Res

earc

h

CLR-3 : Able to design simple combinational logics using basic gates and MSI circuits

CLR-4 : Familiarize with basic sequential logic components: flip-flops, registers, counters and their usage, and able to design and analyze sequential logic circuits and Finite State Machines.

CLR-5 : Know how to implement logic circuits using PLDs.

CLR-6 : Use modern engineering tools such as PSPICE / Logisim to carry out design experiments and gain experience with instruments and methods used by technicians and electronic engineers


CLO-1 : Simplify Boolean expressions; carry out arithmetic operations with binary numbers; apply parity method for error detection and correction.

1 90 75 H - - - - - - - - - - - - - -

CLO-2 : Explain the operational characteristics / properties of digital ICs; implement gates as well as other types of IC devices using two major IC technologies, TTL and CMOS.

1 80 70 H - - - - - - - - - - - - - -

CLO-3 : Identify eight basic types of fixed-function combinational logic functions and demonstrate how the devices / circuits can be used in building complete digital systems such as computers.

2,3 90 75 - M H - H - - - - - - - - - -

CLO-4 : Analyze and design Mealy and Moore models of sequential circuits using several types of flip-flops. 2,3 90 75 - M H - H - - - - - - - - - -

CLO-5 : Implement multiple output combinational logic circuits using PLDs; Explain the operation of a CPLD and FPGA. 2 80 75 - M H - L - - - - - - - - - -

CLO-6 : Solve specific design problem, which after completion will be verified using modern engineering tools such as PSPICE / Logisim

2 90 75 - M H - H - - - H - - - M - L

Duration (hour)

Binary Codes, Digital Arithmetic and Simplification of Boolean Functions

Logic Families Combinational Systems Sequential Systems Memory and Programmable Logic

15 15 15 15 15

S-1 SLO-1

Binary Codes, Digital Arithmetic and Simplification of Boolean Functions

Introduction Binary arithmetic units Flip-flop and Latch: SR latch, RAM Memory decoding

SLO-2 Error detecting codes TTL Logic Family Adder JK flip-flop, T flip-flop, D flip-flop ROM

S-2 SLO-1 Error correcting code Totem-pole TTL Design of Half adder Master-slave RS flip-flop

Programmable Logic Devices (PLDs): Basic concepts

SLO-2 Hamming Code open-collector and tristate TTL Design of Full adder Master-slave JK flip-flop PROM

S-3 SLO-1 Arithmetic number representation

Schottkey TTL, standard TTL characteristics

Subtractor Registers & Counters PROM as PLD

SLO-2 Binary arithmetic Metal Oxide Semiconductor logic families Design subtractor using logic gates Shift registers (SISO, SIPO, PISO, PIPO) Programmable Array Logic (PAL)

S 4-5

SLO-1 LAB 1: Study of logic gates

LAB 4: Design and implement encoder and decoder using logic gates

LAB 7: Implement combinational logic functions using standard ICs

LAB 10: Design and implement Synchronous Counters

LAB 13: Construct combinational circuit using Logisim SLO-2

S-6 SLO-1 Hexadecimal arithmetic N-MOS n-bit parallel adder & subtractor Universal shift register Programmable Array Logic (PAL)


SLO-2 Hexadecimal arithmetic P-MOS look ahead carry generator Counters: Asynchronous/Ripple counters Programmable Logic Array (PLA)

S-7 SLO-1 BCD arithmetic simplification CMOS logic circuits Decoder Synchronous counters, Modulus-n Counter Programmable Logic Array (PLA)

SLO-2 Minimization of Boolean Functions: Algebraic simplification

Characteristics of MOS logic Encoder Ring counter, Johnson counter Design combinational circuits using PLD’s

S-8 SLO-1 Problems on Algebraic simplification

Compare MOS logic circuits(CMOS) with TTL digital circuit

Multiplexer Up-Down counter Design combinational circuits using PLD’s

SLO-2 Karnaugh map simplification Electrical characteristics Demultiplexer Mealy and Moore model Design combinational circuits using PLD’s

S 9-10

SLO-1 LAB 2: Design and implement Adder and Subtractor using logic gates

LAB 5: Design and implement Multiplexer and Demultiplexer using logic gates

LAB 8: Verify characteristic table of flip-flops

LAB 11: Construct and verify shift registers LAB 14: Model Practical Examination SLO-2

S-11 SLO-1 Problems on Karnaugh map simplification Fan-out Code converters Synchronous (Clocked) sequential circuits

Design of combinational circuits using PLD’s

SLO-2 Problems on Karnaugh map simplification Propagation Delay Magnitude comparators Synchronous (Clocked) sequential circuits Design sequential circuits using PLD’s

S-12 SLO-1 Quine McCluskey Power dissipation Magnitude comparators Synchronous (Clocked) sequential circuits Design sequential circuits using PLD’s

SLO-2 Tabulation method Noise margin Parity generators (Odd parity) Analyze and design synchronous sequential circuits

Design sequential circuits using PLD’s

S-13 SLO-1

Problems on Quine McCluskey or Tabulation method.

Supply voltage levels Parity generators (Even parity) State reduction Design sequential circuits using PLD’s

SLO-2 Exercise problems using Tabulation method

Operational voltage levels Implementation of combinational logic by standard IC’s.

State assignment Design sequential circuits using PLD’s

S 14-15

SLO-1 Lab 3: Design and Implement 2-bit Magnitude Comparator using logic gates

LAB-6: Design and implement code converters using logic gates

LAB 9: Construct and verify 4-bit ripple counter, Mod-10/Mod-12 ripple counters

Lab 12: Construct mini project work LAB 15: University Practical Exam SLO-2

Learning Resources

1. Morris Mano M, Michael D. Ciletti, Digital Design with an Introduction to the Verilog HDL, 5th ed., Pearson Education, 2014

2. Charles H Roth (Jr), Larry L. Kinney, Fundamentals of Logic Design, 5th ed., Cengage Learning India Edition, 2010

3. Thomas L. Floyd, Digital Fundamentals, 10th ed., Pearson Education, 2013

4. Ronald J. Tocci, Digital System Principles and Applications, 10th ed., Pearson Education, 2009 5. Donald P Leach, Albert Paul Malvino, Goutam Saha, Digital Principles and Applications, 6th ed., Tata-

Mcgraw Hill, 2008 6. LAB MANUAL, Department of ECE, SRM University

Learning Assessment

Bloom’s

Level of Thinking


CLA – 1 (10%) CLA – 2 (15%) CLA – 3 (15%) CLA – 4 (10%)#


r. Level 1 Remember

20% 20% 15% 15% 15% 15% 15% 15% 15% 15% Understand

Level 2 Apply

20% 20% 20% 20% 20% 20% 20% 20% 20% 20% Analyze

Level 3 Evaluate

10% 10% 15% 15% 15% 15% 15% 15% 15% 15% Create

Total 100 % 100 % 100 % 100 % -



1. Mr. Anuj Kumar, Bombardier Transportation, Ahmedabad, [email protected] 1. Dr. Meenakshi, Professor of ECE, CEG, Anna University, [email protected] 1. Mr. Viswanathan B, SRMIST

2. Mr. Hariharasudhan - Johnson Controls, Pune, [email protected] 2. Dr. Venkatesan, Sr. Scientist, NIOT, Chennai, [email protected]


Course Code

18ECC104T Course Name

SIGNALS AND SYSTEMS Course


L T P C

3 1 0 4


Nil Co-requisite

Courses 18MAB201T

Progressive Courses

18ECC204J, 18ECS201T, 18ECE240T, 18ECE241J



CLR-1 : Know about requirements of signal and system analysis in communication. 1 2 3 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

CLR-2 : Understand the analysis of Periodic and Aperiodic Continuous time Signals using Fourier series and transforms

Leve

l of T

hink

ing

(Blo

om)

Exp

ecte

d P

rofic

ienc

y (%

)

Exp

ecte

d A

ttain

men

t (%

)

Eng

inee

ring

Kno

wle

dge

Pro

blem

Ana

lysi

s

Des

ign

& D

evel

opm

ent

Ana

lysi

s, D

esig

n, R

esea

rch

Mod

ern

Too

l Usa

ge

Soc

iety

& C

ultu

re

Env

ironm

ent &

Sus

tain

abili

ty

Eth

ics

Indi

vidu

al &

Tea

m W

ork

Com

mun

icat

ion

Pro

ject

Mgt

. & F

inan

ce

Life

Lon

g Le

arni

ng

PS

O–1

: Pro

fess

iona

l Ach

ieve

men

t

PS

O –

2: P

roje

ct M

anag

emen

t T

echn

ique

s

PS

O –

3: A

naly

ze &

Res

earc

h CLR-3 : Educate about Continuous time system through Laplace transform and Convolution integral

CLR-4 : Understand the characterization of the Discrete time signals and system through DTFT, Convolution sum

CLR-5 : Understand the concept of Z-Transform for the analysis of DT system

CLR-6 : Develop expertise in time-domain and frequency domain approaches to the analysis of continuous and discrete systems and also the ability to apply modern computation software tool for the analysis of electrical engineering problems


CLO-1 : Understand the various classifications of Signals and Systems 1 65 60 H - - - - - - - - - - - - - -

CLO-2 : Analyze Periodic and Aperiodic Continuous time Signals using Fourier series and Fourier Transform 2 65 60 - H - - - - - - - - - - - - - CLO-3 : Analyze and characterize the Continuous time system through Laplace transform and Convolution integral. 2 65 60 - H - - - - - - - - - - - - -

CLO-4 : Analyze and characterize the Discrete time signals and system through DTFT, Convolution sum 2 65 60 - H M - - - - - - - - - - - -

CLO-5 : Analyze and characterize the Discrete time system using Z transform 2 65 60 - H M - - - - - - - - - - - L

CLO-6 : Apply the mathematical techniques used for continuous-time signal and discrete-time signal and system analysis 2 65 60 - H - M M - - - - - - - L - -

Duration (hour)

Classification of Signals and Systems Analysis of Continuous Time Signals Analysis of LTI CT System Analysis of DT Signals and Systems Analysis of LTI DT System

using Z-Transform

12 12 12 12 12

S-1 SLO-1 Introduction to signals and systems Introduction to Fourier series System modeling Representation of sequences Z transform – introduction

SLO-2 Requirements of signal and system analysis in communication

Representation of Continuous time Periodic signals

Description of differential equations Discrete frequency spectrum and range Region of convergence of finite duration sequences

S-2 SLO-1 Continuous time signals (CT signals)

Fourier series: Trigonometric representation

Solution of Differential equation Discrete Time Fourier Transform (DTFT) – Existence

Properties of ROC

SLO-2 Discrete time signals (DT signals) Fourier series: Trigonometric representation

Differential equation: Zero initial conditions DTFT of standard signals Properties of ROC

S-3 SLO-1

Representation of signals: Step, Ramp, Pulse, Impulse

Fourier series: Cosine representation Differential equation: Zero state response Properties of DTFT Properties of Z transform

SLO-2 Representation of signals: Sinusoidal, Exponential

Fourier series: Cosine representation Differential equation: Zero Input response Properties of DTFT Properties of Z transform

S-4 SLO-1 Basic operation on the signals Symmetry conditions Total Response Inverse DTFT Unilateral z transforms

SLO-2 Problems on signal operations Properties of Continuous time Fourier series

Step response Practice on IDTFT Properties of z transform

S-5 SLO-1

Classification of CT and DT signals: Periodic & Aperiodic signals.

Practice problems on Fourier series Impulse response Impulse response of a system with DTFT Bilateral Z transforms

SLO-2 Classification of CT and DT signals: Deterministic & Random signals.

Practice problems on Fourier series Frequency response Frequency response of a system with DTFT

Properties of z transform


S-6 SLO-1 Energy signal Gibb’s Phenomenon Convolution integral Practice problems Relation between DTFT and Z transform

SLO-2 Power signal Parseval’s relation for power signals Properties of convolution Practice problems Practice problems

S-7 SLO-1 Even & Odd signals Power density spectrum, Practice Problems

Solution of linear constant coefficient difference equations

condition for causality in Z domain

SLO-2 Even & Odd signals Frequency spectrum. Practice Problems Initial conditions condition for stability in Z domain

S-8 SLO-1 CT systems and DT systems Fourier transform: Introduction

Signal and system analysis with Laplace transform

Solution of difference equations Inverse Z transform

SLO-2 Classification of systems: Static & Dynamic Representation of Continuous time signals Convergence of Laplace Transform Zero input response Power series expansion

S-9 SLO-1 Superposition theorem

Properties of Continuous time Fourier transform

Properties of Laplace transform Solution of difference equations with Zero state response

Inverse Z transform with Partial fraction

SLO-2 Linear & Nonlinear system Properties of Continuous time Fourier transform

Properties of Laplace transform Total response Inverse Z transform with Partial fraction

S-10 SLO-1 Time-variant & Time-invariant system Parseval’s relation for energy signals Inverse Laplace transform Evaluation of Impulse response Residue method

SLO-2 Time-invariant system Energy density spectrum Problems Evaluation of Step response Convolution method

S-11 SLO-1 Causal system

Analysis of LTI system using Fourier Transform

Analysis and characterization of LTI system using Laplace transform

Convolution Properties Analysis and characterization of DT system using Z-transform

SLO-2 Noncausal system Analysis of LTI system using Fourier Transform

Analysis and characterization of LTI system using Laplace transform

Convolution Sum Analysis and characterization of DT system using Z-transform

S-12 SLO-1 Stable & Unstable,LTI System Practice problems on Fourier Transform Practice problems on Laplace transform Circular convolution

Practice problems on LTI-DT systems in Z transform

SLO-2 Unstable, LTI System Practice problems on Fourier Transform Practice problems on Laplace transform Frequency response Practice problems on LTI-DT systems in Z transform

Learning Resources

1. Alan V Oppenheim, Ronald W. Schafer Signals & Systems, 2nd ed., Pearson Education, 2015 2. P.Ramakrishna Rao, Shankar Prakriya, Signals & Systems, 2nd ed., McGraw Hill Education, 2015 3. Simon Haykin, Barry Van Veen, Signals and Systems, 2nd ed., John Wiley & Sons Inc., 2007 4. Lathi B.P, Linear Systems & Signals, 2nd ed., Oxford Press, 2009

5. John G. Proakis, Manolakis, Digital Signal Processing, Principles, Algorithms and Applications, 4th ed., Pearson Education, 2007.

6. Software: Matlab Student Version Release 2011a, Mathworks, Inc. The Matlab Student Version and toolboxes may be purchased through the Mathworks website at http://www.mathworks.com/

Learning Assessment

Bloom’s

Level of Thinking


CLA – 1 (10%) CLA – 2 (15%) CLA – 3 (15%) CLA – 4 (10%)# Theory Practice Theory Practice Theory Practice Theory Practice Theory Practice

Level 1 Remember

40 % - 30 % - 30 % - 30 % - 30% - Understand

Level 2 Apply

40 % - 40 % - 40 % - 40 % - 40% - Analyze

Level 3 Evaluate

20 % - 30 % - 30 % - 30 % - 30% - Create

Total 100 % 100 % 100 % 100 % 100 %


Course Designers


1. Mr. Anuj Kumar, Bombardier Transportation, Ahmedabad, [email protected] 1. Dr. Meenakshi, Professor of ECE, CEG, Anna University, [email protected] 1. Dr. A. Ruhan Bevi, SRMIST

2. Mr. Hariharasudhan - Johnson Controls, Pune, [email protected] 2. Dr. Venkatesan, Sr. Scientist, NIOT, Chennai, [email protected] 2. Dr. D. Malathi, SRMIST


Course Code


ELECTROMAGNETICS AND TRANSMISSION LINES Course


L T P C

3 0 0 3


18PYB101J Co-requisite

Courses Nil

Progressive Courses

18ECC301T

Course Offering Department Electronics and Communication Engineering Data Book / Codes/Standards Clark’s Table, IS : 456-2000


CLR-1 : Gain knowledge on the basic concepts and insights of Electric field 1 2 3 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

CLR-2 : Gain knowledge on the basic concepts and insights of Magnetic field and Emphasize the significance of Maxwell’s equations.

Leve

l of T

hink

ing

(Blo

om)

Exp

ecte

d P

rofic

ienc

y (%

)

Exp

ecte

d A

ttain

men

t (%

)

Eng

inee

ring

Kno

wle

dge

Pro

blem

Ana

lysi

s

Des

ign

& D

evel

opm

ent

Ana

lysi

s, D

esig

n, R

esea

rch

Mod

ern

Too

l Usa

ge

Soc

iety

& C

ultu

re

Env

ironm

ent &

Sus

tain

abili

ty

Eth

ics

Indi

vidu

al &

Tea

m W

ork

Com

mun

icat

ion

Pro

ject

Mgt

. & F

inan

ce

Life

Lon

g Le

arni

ng

PS

O–1

: Pro

fess

iona

l Ach

ieve

men

t

PS

O –

2: P

roje

ct M

anag

emen

t T

echn

ique

s

PS

O –

3: A

naly

ze &

Res

earc

h CLR-3 : Interpret the wave propagation in guided waveguide.

CLR-4 : Acquire the fundamental knowledge on Transmission Line Theory. CLR-5 : Acquire the knowledge on transmission line parameter calculation and impedance matching concepts.

CLR-6 : Acquire knowledge on theoretical concepts and analysis techniques to find solutions for problems related to electromagnetic wave propagation and Transmission line Theory.


CLO-1 : Apply the concepts and knowledge to solve problems related to electric field. 2 60 60 M H - - - - - - - - - - - - L CLO-2 : Analyze the concepts of Magnetic field and Maxwell’s equations in the real world application. 2 60 60 H M - - - - - - - - - - - - L CLO-3 : Translate the phenomenon of guided wave propagation and its mode of propagation. 1 60 60 H M - - - - - - - - - - - - L CLO-4 : Describe the importance of transmission line theory applicable to low frequency transmission lines. 1 60 60 M H - - - - - - - - - - - - L CLO-5 : Solve transmission line parameter and impedance matching through analytical and graphical methods. 2 60 60 M H - - - - - - - - - - - - M

CLO-6 : Demonstrate how electromagnetic waves are generated using Maxwell’s equations and how Transmission lines are used to transfer electromagnetic energy from one point to another with minimum losses over a wideband of frequencies.

2 60 60 M H - - - - - - - - - L - - H

Duration (hour)

Electrostatics Magnetostatics and Maxwells Equations Electromagnetic Waves and

Waveguides Transmission Line Theory

Transmission Line Calculator and Impedance Matching

9 9 9 9 9

S-1 SLO-1 Introduction Energy density in electrostatic field Introduction Transmission line parameters Introduction

SLO-2 Rectangular co-ordinate Problem discussion. Waves in general Transmission line parameters Smith chart Introduction

S-2 SLO-1 Cylindrical & Spherical Co-ordinate

Biot savart law-Magnetic field intensity due to Infinite line charge

Plane wave in lossless dielectric Transmission line equivalent circuit Reflection coefficient, Standing wave ratio Input impedance calculation in smith chart

SLO-2 Review of vector calculus H- due finite and semi finite line charge Plane wave in free space Explanation Practice problems.

S-3 SLO-1 Coulomb’s Law and field intensity

Ampere’s circuital law& application: Infinite line current

Plane wave in good conductor Transmission line equation derivation Single stub matching Introduction

SLO-2 Problem based on coulomb’s law Infinite Sheet current Problems based on plane waves in lossless, free space and good conductor

Problem discussion. Procedure for single stub matching

S-4 SLO-1

Electric field due to continuous charge distribution-.Concept

Infinitely long coaxial Transmission line Rectangular waveguide Transmission line characteristics: lossless line

Problems solving in smith chart

SLO-2 Derivation of E due Infinite Line charge Problem based on ACL. Rectangular waveguide-Problems Distortionless line. Problems solving in smith chart

S-5 SLO-1 Electric field due to sheet charge Magnetic flux density Transverse Electric (TE) mode Input impedance derivation Impedance matching using Quarter wave transformer


SLO-2 Problem based on sheet charge Problem based on magnetic field and flux. Transverse Electric (TE) mode-problems Problems for input impedance calculation. Problems.

S-6 SLO-1 Electric field due to volume charge Maxwell’s equation for static field Transverse Electric (TE) mode Standing wave ratio Single stub tuner

SLO-2 Electric flux density Faraday’s law Transverse Electric (TE) mode-Problems Calculation of standing wave ratio. Problem discussion

S-7 SLO-1 Gauss law application-point charge Transformer EMF Wave propagation in guide Reflection coefficient Slotted Line (Impedance Measurement)

SLO-2 Electric flux due infinite line charge Motional EMF Problem discussion Problem discussion. Problem discussion

S-8 SLO-1 Electric flux due sheet charge Displacement current. Power Transmission Shorted line, open circuited line Transmission Lines as circuit Elements

SLO-2 Electric flux due coaxial cable Maxwell’s equation in time varying field Calculation of Pavg and Ptotal Matched line Problem discussion

S-9 SLO-1 Relation between E&V Time varying potential concepts Power attenuation Power calculations Additional smith chart problem solving.

SLO-2 Electric dipole and flux lines Time varying potential derivation. Calculation of αTE and αTE Problem discussion. Additional smith chart problem solving.

Learning Resources

1. Matthew N. O. Sadiku., S. V. Kulkarni, Elements of Electromagnetics, 6th ed., Oxford University Press, 2015 2. G. S. N. Raju, Electromagnetic Field Theory and Transmission Lines, Pearson Education, 2006 3. Nannapaneni Narayana Rao, Principles of Engineering Electromagnetics,6th ed., Pearson Education, 2016

4. William H. Hayt,Jr., John A.Buck., Engineering Electromagnetics, 8th ed., Tata McGraw-Hill 2012 5. John D.Ryder, Networks, Lines and Fields, PHI, 2009

Learning Assessment

Bloom’s

Level of Thinking



Level 1 Remember

40 % - 30 % - 30 % - 30 % - 30% - Understand

Level 2 Apply

40 % - 40 % - 40 % - 40 % - 40% - Analyze

Level 3 Evaluate

20 % - 30 % - 30 % - 30 % - 30% - Create

Total 100 % 100 % 100 % 100 % 100 %



1. Mr. Anuj Kumar, Bombardier Transportation, Ahmedabad, [email protected] 1. Dr. Meenakshi, Professor of ECE, CEG, Anna University, [email protected] 1. Dr. P. Eswaran, SRMIST



Course Code


ANALOG ELECTRONIC CIRCUITS Course


L T P C

3 0 2 4


18ECC102J Co-requisite

Courses 18ECC202J

Progressive Courses

Nil



CLR-1 : Understand the operation and design of BJT amplifier circuits for a given specification 1 2 3 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

CLR-2 : Understand the operation and design of MOSFET amplifier circuits for a given specification

Leve

l of T

hink

ing

(Blo

om)

Exp

ecte

d P

rofic

ienc

y (%

)

Exp

ecte

d A

ttain

men

t (%

)

Eng

inee

ring

Kno

wle

dge

Pro

blem

Ana

lysi

s

Des

ign

& D

evel

opm

ent

Ana

lysi

s, D

esig

n, R

esea

rch

Mod

ern

Too

l Usa

ge

Soc

iety

& C

ultu

re

Env

ironm

ent &

Sus

tain

abili

ty

Eth

ics

Indi

vidu

al &

Tea

m W

ork

Com

mun

icat

ion

Pro

ject

Mgt

. & F

inan

ce

Life

Lon

g Le

arni

ng

PS

O–1

: Pro

fess

iona

l Ach

ieve

men

t

PS

O –

2: P

roje

ct M

anag

emen

t T

echn

ique

s

PS

O –

3: A

naly

ze &

Res

earc

h

CLR-3 : Understand the effects of negative feedback on amplifier circuits, and analyze the different RC and LC oscillator circuits to determine the frequency of oscillation

CLR-4 : Understand the operation and design of various types of power amplifier circuits.

CLR-5 : Understand how matched transistor characteristics are used in the IC design and to be able to design BJT and MOSFET current sources.

CLR-6 : Gain hands-on experience to put theoretical concepts learned in the course to practice.


CLO-1 : Analyze and design bipolar amplifier circuits to meet certain specifications, and to Analyze the frequency response of amplifier circuits, taking into account various circuit capacitors, to determine the bandwidth of the circuit.

2,3 70 70 L M H - - - - - - - - - - - -

CLO-2 : Analyze and design MOSFET amplifier circuits to meet certain specifications, and to Analyze the frequency response of amplifier circuits, taking into account various circuit capacitors, to determine the bandwidth of the circuit.

2,3 70 70 L M H - - - - - - - - - - - -

CLO-3 : Understand the characteristics and principles of feedback amplifier circuits and oscillator circuits to analyze and design circuits to meet certain specifications.

2,3 70 70 L M H - - - - - - - - - - - -

CLO-4 : Analyze three principle classes of power amplifiers, and determine the maximum possible conversion efficiency of each type of power amplifier

2,3 70 70 L M H - - - - - - - - - - - -

CLO-5 : Design the basic circuit building blocks that are used in the design of IC amplifiers, namely current mirrors and sources 2,3 70 70 L M H - - - - - - - - - - - -

CLO-6 : Analyze and design analog electronic circuits using discrete components, and take measurement of various analog circuits to compare experimental results in the laboratory with theoretical analysis.

3 90 80 - - H - M - - - M - - M H L -

Duration (hour) BJT Amplifiers FET Amplifiers Feedback amplifies & Oscillators Oscillators & Power Amplifiers IC Biasing & Amplifiers with Active Load

15 15 15 15 15

S-1 SLO-1 Overview of DC analysis of BJT circuits Overview of FET DC circuit analysis

Basic feedback concepts, general feedback structure

Crystal Oscillators BJT current sources: Cascode current source, Widlar current source

SLO-2 Overview of BJT models Problem solving Properties of negative feedback Problem solving Multi-transistor current source Problem solving

S-2 SLO-1 AC load line analysis

Graphical analysis, load lines, and small-signal models

Feedback Topologies: Voltage-Series & Current-Series feedback connections

Negative-resistance oscillator FET current sources: 2-transistor MOSFET current source

SLO-2 Problem solving Problem solving Problem solving Problem solving Problem solving

S-3 SLO-1

AC analysis of Common-Emitter BJT amplifier config. using hybrid-π model

AC analysis of Common-Source MOSFET amplifier configuration

Feedback Topologies: Voltage-Shunt & Current-Shunt feedback connections

Power Amplifiers: Definitions and amplifier types

FET current sources: Cascode current mirror and Wilson current mirror

SLO-2 Problem solving Problem solving Problem solving Q point placement Problem solving

S 4-5

SLO-1 Lab 1: Learning to design amplifier and oscillator circuits

Lab 4: Design & analyze differential amplifier with resistive load

Lab 7: Design and analyze RC oscillators Lab 10: BJT & FET Current Sources Lab 13: Design and analyze differential amplifier with active load SLO-2

S-6 SLO-1 AC analysis of Common-Base BJT amplifier configuration using hybrid-π model

AC analysis of Common-Gate MOSFET amplifier configuration

Practical Feedback Amplifier Circuits Maximum dissipation hyperbola Analysis of CE BJT amplifier circuit with active load


SLO-2 Problem solving Problem solving Problem solving Heat sink Problem solving

S-7 SLO-1

AC analysis of Common-Collector BJT amplifier config. using hybrid-π model

AC analysis of Common-Drain MOSFET amplifier configuration

Oscillators: Principles of Oscillation Class A amplifier Analysis of CS FET amplifier circuit with active load

SLO-2 Problem solving Problem solving Types of Oscillators Problem solving Problem solving

S-8 SLO-1

Multi-stage amplifier configurations: CE - CE, CE - CC amplifiers

BiFET amplifier configuration Audio Frequency Oscillators: RC Phase-Shift Oscillator

Class B and Class AB push-pull amplifiers DC and small-signal analysis of basic BJT differential pairs

SLO-2 Problem solving Problem solving Problem solving Problem solving Problem solving

S 9-10

SLO-1 Lab 2: Design and analyze BJT amplifier configurations

Lab 5: Design and analyze negative feedback amplifier configurations

Lab 8: Design and analyze LC oscillators Lab 11: Design and analyze BJT CE amplifier with active load

Lab 14: Model Practical Examination SLO-2

S-11 SLO-1

Multi-stage amplifier configurations: CE - CB, and CC - CC amplifiers

Low Frequency response analysis of a basic FET CS amplifier

Audio Frequency Oscillators: Wein Bridge Oscillator

Class C amplifiers DC and small-signal analysis of basic FET differential pairs

SLO-2 Problem solving Problem Solving Problem Solving Problem solving Problem solving

S-12 SLO-1

Low Frequency response analysis of a basic BJT CE amplifier

High Frequency response analysis of a basic FET CS amplifier

Radio Frequency Oscillators: Hartley Oscillator

Class D and Class E amplifiers Analysis of BJT differential amplifier with active load

SLO-2 Problem Solving Problem Solving Problem solving Amplifier distortions Problem solving

S-13 SLO-1

High Frequency response analysis of a basic BJT CE amplifier

Design problems in MOSFET amplifier configurations

Radio Frequency Oscillators: Colpitts & Clapp Oscillators

IC Biasing & Amplifiers with Active Load: BJT current sources: 2- & 3-transistor current sources

Analysis of FET differential amplifier with active load

SLO-2 Problem Solving Operational voltage levels Problem solving Problem solving Problem solving

S 14-15

SLO-1 Lab 3: Design and analyze multistage amplifier configurations

Lab 6: Design and analyze MOSFET amplifier configurations

Lab 9: Classes of power amplifier (efficiency calculation)

Lab 12: Design and analyze FET CS amplifier with active load

Lab 15: End Semester Practical Examination SLO-2

Learning Resources

1. David A. Bell, Electronic Devices and Circuits, 5th ed., Oxford University Press, 2015 2. Donald Neamen, Electronic Circuits: Analysis and Design, 3rd ed., McGraw-Hill Education, 2011 3. Muhammad Rashid, Microelectronic Circuits: Analysis & Design, 2nd ed., Cengage Learning, 2010 4. Adel S. Sedra, Kenneth C. Smith, Microelectronic Circuits: Theory and Applications, OUP, 2014

5. Robert L. Boylestad, Louis Nashelsky, Electronic Devices and Circuit Theory, 11th ed., Pearson Education, 2013

6. Albert P. Malvino, David J. Bates, Electronic Principles, 8th ed., Tata McGraw Hill, 2015

Learning Assessment

Bloom’s

Level of Thinking


CLA – 1 (10%) CLA – 2 (15%) CLA – 3 (15%) CLA – 4 (10%)#


r. Level 1 Remember

20% 20% 15% 15% 15% 15% 15% 15% 15% 15% Understand

Level 2 Apply

20% 20% 20% 20% 20% 20% 20% 20% 20% 20% Analyze

Level 3 Evaluate

10% 10% 15% 15% 15% 15% 15% 15% 15% 15% Create

Total 100 % 100 % 100 % 100 % -




2. Mr. Hariharasudhan - Johnson Controls, Pune, [email protected] 2. Dr. Venkatesan, Sr. Scientist, NIOT, Chennai, [email protected] 2. Dr. M. Sangeetha, SRMIST


Course Code


LINEAR INTEGRATED CIRCUITS Course


L T P C

3 0 2 4



Courses 18ECC201J

Progressive Courses

Nil



CLR-1 : Study the basic principles, configurations and practical limitations of op-amp 1 2 3 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

CLR-2 : Understand the various linear and non-linear applications of op-amp

Leve

l of T

hink

ing

(Blo

om)

Exp

ecte

d P

rofic

ienc

y (%

)

Exp

ecte

d A

ttain

men

t (%

)

Eng

inee

ring

Kno

wle

dge

Pro

blem

Ana

lysi

s

Des

ign

& D

evel

opm

ent

Ana

lysi

s, D

esig

n, R

esea

rch

Mod

ern

Too

l Usa

ge

Soc

iety

& C

ultu

re

Env

ironm

ent &

Sus

tain

abili

ty

Eth

ics

Indi

vidu

al &

Tea

m W

ork

Com

mun

icat

ion

Pro

ject

Mgt

. & F

inan

ce

Life

Lon

g Le

arni

ng

PS

O–1

: Pro

fess

iona

l Ach

ieve

men

t

PS

O –

2: P

roje

ct M

anag

emen

t T

echn

ique

s

PS

O –

3: A

naly

ze &

Res

earc

h CLR-3 : Understand the operation and analysis of op-amp oscillators, single chip oscillators and frequency generators

CLR-4 : Identify the active filter types, filter response characteristics, filter parameters and IC voltage regulators.

CLR-5 : Gain knowledge on data converter terminology, its performance parameters, and various circuit arrangements for A/D and D/A conversions.



CLO-1 : Infer the DC and AC characteristics of operational amplifiers and its effect on output and their compensation techniques 3 80 70 H M - - - - - - - - - - - - -

CLO-2 : Elucidate and design the linear and non-linear applications of an opamp and special application ICs 3 85 75 - M H - - - - - - - - - - - -

CLO-3 : Explain and compare the working of multivibrators using special application IC 555 and general purpose opamp 3 75 70 - M H - - - - - - - - - - - - CLO-4 : Classify and comprehend the working principle of data converters and active filters 3 85 80 - M H - - - - - - - - - - - -

CLO-5 : Illustrate the function of application specific ICs such as Voltage regulators, PLL and its application in communication 3 85 75 - M H - - - - - - - - - M - H

CLO-6 : Analyze and design electronic circuits and systems using linear ICs, and take measurement of various analog circuits to compare experimental results in the laboratory with theoretical analysis

3 85 75 - M H - M - - - M - - - H L -

Duration (hour) 15 15 15 15 15

S-1 SLO-1 Op-amp symbol, terminals, packages

Basic op-amp circuits: Inverting & Non-inverting voltage amplifiers

Waveform Generators: Sine-wave Generators - Design

Filters: Comparison between Passive and Active Networks

Digital to Analog Conversion: DAC Specifications

SLO-2 Op-amp-Specifications Voltage follower Implementation & Solving problems Active Network Design Solving problems

S-2 SLO-1 Block diagram Representation of op-amp Summing, scaling & averaging amplifiers, Square Wave generators- Design Filter Approximations Weighted Resistor DAC

SLO-2 Ideal op-amp & practical op-amp - Open loop & closed loop configurations

AC amplifiers Implementation & Solving problems Design of LPF & Solving problems Solving problems

S-3 SLO-1 DC performance characteristics of op-amp

Linear Applications: Instrumentation Amplifiers

Triangle wave generators Design of HPF & Solving problems R-2R Ladder DAC

SLO-2 Solving Problems Instrumentation Amplifiers, Solving Problems

Saw-tooth Wave generators. Design of BPF& Solving problems Solving problems

S 4-5

SLO-1 Lab-1:Basic op-amp circuits Lab 4: Comparators

Lab 7: Waveform generators: using op-amp & 555 Timer

Lab 10: Design of LPF, HPF, BPF and Band Reject Filters

Lab 13: Flash Type ADC SLO-2

S-6 SLO-1 AC performance characteristics of op-amp V-to-I Converters IC 555 Timer: Circuit schematic Design of Band Reject Filters Inverted R-2R Ladder DAC

SLO-2 Solving Problems I-to-V converters Operation and its applications Solving problems Monolithic DAC

S-7 SLO-1 Frequency response Differentiators IC 555 Timer: Monostable operation State Variable Filters – All Pass Filters,

Analog to Digital conversion: ADC specifications

SLO-2 Frequency response Integrators Applications & Solving problems Solving problems Solving problems


S-8 SLO-1 Frequency compensation

Non-linear Applications: Precision Rectifiers

IC 555 Timer: Astable operation Switched Capacitor Filters. Ramp Type ADC

SLO-2 Frequency compensation Wave Shaping Circuits (Clipper and Clampers)

Applications & Solving problems Solving problems Solving problems

S 9-10

SLO-1 Lab 2: Integrators and Differentiators Lab 5: Wave shaping circuits


Lab 11: IC Voltage regulators Lab 14: Simulation experiments using EDA tools SLO-2

S-11 SLO-1 Basic op-amp internal schematic Log and Antilog Amplifiers, PLL: Operation of the Basic PLL

Voltage Regulators: Basics of Voltage Regulator

Successive Approximation ADC

SLO-2 operations of blocks Analog voltage multiplier circuit and its applications,

Closed loop analysis of PLL Specifications and characteristic parameters

Solving problems

S-12 SLO-1 Basic op-amp internal schematic

Operational Trans-Conductance Amplifier (OTA)

Voltage Controlled Oscillator Linear Voltage Regulators using Op-amp, Dual Slope ADC

SLO-2 operations of blocks Comparators : operation Solving problems IC Regulators (78xx, 79xx, LM 317, LM 337, 723),

Flash Type ADC,

S-13 SLO-1 Review of data sheet of an op-amp. Comparators applications PLL applications Switching Regulators -operation Solving problems on Flash Type ADC,

SLO-2 Solving Problems Sample and Hold circuit. Solving problems Types Monolithic ADC

S 14-15

SLO-1 Lab 3: Rectifiers


Lab 9: Design of LPF, HPF, BPF and Band Reject Filters

Lab 12: R-2R ladder DAC Lab 15: Simulation experiments using EDA tools SLO-2

Learning Resources

1. Ramakant A. Gayakwad, Op-Amps and Linear Integrated Circuits, 4th ed., Prentice Hall, 2000 2. David A. Bell, Operational Amplifiers and Linear ICs, 3rd ed., OUP, 2013 3. Roy Choudhury, Shail Jain, Linear Integrated Circuits, 4th ed., New Age International Publishers, 2014 4. Robert F. Coughlin, Frederick F. Driscoll, Operational-Amplifiers and Linear Integrated Circuits, 6th ed.,

Prentice Hall, 2001 5. Sergio Franco, Design with operational amplifier and analog integrated circuits, McGraw Hill, 1997

6. LABORATORY MANUAL, Department of ECE, SRM University 7. David A Bell, Laboratory Manual for Operational Amplifiers & Linear ICs, 2nd ed., D.A. Bell, 2001 8. David La Lond, Experiments in Principles of Electronic Devices and Circuits, Delmar Publishers, 1993 9. Muhammed H Rashid, Introduction to PSpice using OrCAD for circuits and electronics, 3rd ed., Pearson,

2004 10. L. K. Maheshwari, M. M. S. Anand, Laboratory Experiments and PSPICE Simulations in Analog

Electronics, PHI, 2006

Learning Assessment

Bloom’s

Level of Thinking



Level 1 Remember

20% 20% 15% 15% 15% 15% 15% 15% 15% 15% Understand

Level 2 Apply

20% 20% 20% 20% 20% 20% 20% 20% 20% 20% Analyze

Level 3 Evaluate

10% 10% 15% 15% 15% 15% 15% 15% 15% 15% Create

Total 100 % 100 % 100 % 100 % -




2. Mr. Hariharasudhan - Johnson Controls, Pune, [email protected] 2. Dr. Venkatesan, Sr. Scientist, NIOT, Chennai, [email protected] 2. Dr. M. Sangeetha, SRMIST


Course Code


Microprocessor, Microcontroller and Interfacing Techniques Course


L T P C

3 0 2 4



Courses Nil

Progressive Courses

18ECE204J, 18ECE205J



CLR-1 : Understand basic architecture of Intel 8086 microprocessor and Intel 8051 Microcontroller 1 2 3 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

CLR-2 : Familiarize the students with the programming and interfacing of microprocessors and microcontrollers with memory and peripheral chips

Leve

l of T

hink

ing

(Blo

om)

Exp

ecte

d P

rofic

ienc

y (%

)

Exp

ecte

d A

ttain

men

t (%

)

Eng

inee

ring

Kno

wle

dge

Pro

blem

Ana

lysi

s

Des

ign

& D

evel

opm

ent

Ana

lysi

s, D

esig

n, R

esea

rch

Mod

ern

Too

l Usa

ge

Soc

iety

& C

ultu

re

Env

ironm

ent &

Sus

tain

abili

ty

Eth

ics

Indi

vidu

al &

Tea

m W

ork

Com

mun

icat

ion

Pro

ject

Mgt

. & F

inan

ce

Life

Lon

g Le

arni

ng

PS

O–1

: Pro

fess

iona

l Ach

ieve

men

t

PS

O –

2: P

roje

ct M

anag

emen

t T

echn

ique

s

PS

O –

3: A

naly

ze &

Res

earc

h

CLR-3 : Interface a microprocessor / microcontroller to external I/O devices and perform I/O device programming in assembly

CLR-4 : Use the computer to write and assemble ALPs and also run them by downloading them to the target microprocessor

CLR-5 : Understand the hardware / software interrupts and their applications, and as well the serial port programming CLR-6 : Provide strong foundation for designing real world applications using microprocessors and microcontrollers.


CLO-1 : Apply a basic concept of digital fundamentals to Microprocessor based personal computer system 1 60 70 - H - - L - - - - - - - - -

CLO-2 : Solve basic binary math operations using the microprocessor. / microcontroller 2 60 70 M - - - - - - - - - M - - -

CLO-3 : Demonstrate programming proficiency using the various addressing modes of the target microprocessor / microcontroller 3 60 70 - M H - H - - - - - - - - L

CLO-4 : Distinguish and analyze the properties of Microprocessors & Microcontrollers. 1 60 70 - M - - - - - - - - H - - - CLO-5 : Illustrate their practical knowledge through laboratory experiments. 3 60 70 - M M - H - - - - H - - - H

CLO-6 : Design, interface and program memory chips and various peripheral chips with microprocessor / microcontroller 3 60 70 - - M - H - - - - - H L - M

Learning Unit / Module 1:

Intel 8086 – Architecture, Signals and Features

Learning Unit / Module 2: Programming with Intel 8086

Learning Unit / Module 3: 8086 Interfacing with Memory and

Programmable Devices

Learning Unit / Module 4: Intel 8051 – Architecture and

Programming

Learning Unit / Module 5: Interfacing of 8051


S-1 SLO-1

Introduction: History of computers, Block diagram of a microcomputer

Addressing modes of 8086 Semiconductor memory interfacing Introduction: Differences between microprocessor and microcontroller

8051 parallel ports, and

SLO-2 Intel 80x86 evolutions Dynamic RAM interfacing Intel’s family of 8-bit microcontrollers, and feature of 8051 microcontroller

its programming

S-2 SLO-1 Features of 8086 microprocessor

Instruction Set of 8086: Data Transfer Instructions

Programmable Peripheral Interface 8255 Architecture of 8051 8051 timers, and

SLO-2 Register organization of 8086 Example programs Interfacing 8255 with 8086 and programming

Architecture of 8051 its programming

S-3 SLO-1 Architecture of 8086

Data Conversion Instructions, Arithmetic Instructions

Interfacing ADC with 8086 and programming

Signal descriptions of 8051 8051 interrupts, and

SLO-2 Architecture of 8086 Example programs Interfacing DAC with 8086 and programming

Signal descriptions of 8051 its programming

S-4,5

SLO-1 Lab-1: (a) Learning to Program with 8086 processor kit; Learning the hardware features of the 8086 processor kit

Lab-4: General Purpose Programming in 8086

Lab-7: Interfacing DAC / ADC with 8086 / 8051

Lab-10: Programming timer / counter in 8086 / 8051

Lab-13: Simulation of 8051 using Keil Software SLO-2

S-6 SLO-1 Instruction queue and pipelining

Logical instructions and Processor control instructions

Stepper Motor interfacing – concept Register set of 8051 8051 serial port, and

SLO-2 Segmentation of memory used with 8086 Example programs Example programs Operational features of 8051 its programming

S-7 SLO-1 Methods of generating physical address in 8086

String instructions Programmable Interval Timer 8254 Memory and I/O addressing by 8051 Interfacing program memory with 8086


SLO-2 Pin signals of 8086: Common signals Example programs Interfacing 8254 with 8086 and programming

Interrupts and Stack of 8051 Interfacing data memory with 8086

S-8 SLO-1 Minimum mode signals Branch Instructions Programmable Interrupt Controller 8259 Addressing modes of 8051

Interfacing input devices: push-button / matrix keypad

SLO-2 Maximum mode signals Example programs Interfacing 8259 with 8086 and programming

Example programs Example programs

S-9,10 SLO-1 Lab-2: General Purpose Programing in

8086 Lab-5: Simulation of 8086 using MASM Software / 8086 Emulator

Lab-8: Interfacing DC motor / stepper motor / servo motor with 8086 / 8051

Lab-11: Programming interrupts in 8086 / 8051

Lab-14: Model Practical Exam SLO-2

S-11 SLO-1 Minimum mode 8086 system, and

Assembly Language Programming of 8086

Programmable Keyboard / Display Controller 8279

8051 Instruction Set: Arithmetic and Logical Instructions

Interfacing display devices: LED / 7-segment / LCD displays

SLO-2 Timings Assembly Language Programming of 8086

Interfacing 8279 with 8086 and programming

Example Programs Example programs

S-12 SLO-1 Maximum mode 8086 system, and Stack structure, and

Programmable Communication Interface 8251 USART

Data Transfer Instructions Interfacing DAC

SLO-2 Timings related programming Interfacing 8251 with 8086 and programming

Example Programs Interfacing ADC

S-13 SLO-1

Intel 8088 Microprocessor: Pins signals and Architecture

Interrupt structure, and DMA Controller 8257 Boolean Variable Instructions and Branch Instructions

Interfacing DC motor / stepper motor / servo motor

SLO-2 Differences between 8086 & 8088 microprocessors

related programming Interfacing 8257 with 8086 and programming

Example Programs Example programs

S-14,15 SLO-1 Lab-3: General Purpose Programing in

8086 Lab-6: Interfacing 8255 with 8086 / 8051

Lab-9: General Purpose Programming in 8051

Lab-10: Programming serial communication in 8086 / 8051

Lab-15: End-Semester Exam SLO-2

Learning Resources

1. K. M. Bhurchandi and A. K. Ray, "Advanced Microprocessors and Peripherals-with ARM and an Introduction to Microcontrollers and Interfacing ", Tata McGraw Hill, 3rd edition 2015

2. MuhammadAli Mazidi and Janice GillispieMazidi, "The 8051 - Microcontroller and Embedded systems", 7th Edition, Pearson Education, 2011.

3. Doughlas.V.Hall, “Microprocessor and Interfacing : Programming and Hardware”, 3rd edition, McGraw Hill, 2015

4. Kenneth.J.Ayala, “8051 Microcontroller Architecture, Programming and Applications”, 3rd edition, Thomson, 2007

5. Subrataghoshal “ 8051 Microcontroller Internals Instructions ,Programming And Interfacing”,2nd edition Pearson 2010

6. Yu-cheng Liu, Glenn A.Gibson, “Microcomputer systems: The 8086/8088 family-Architecture,programming and design”,2nd edition, Prentice Hall of India,2007

Learning Assessment

Bloom’s

Level of Thinking


CLA – 1 (10%) CLA – 2 (15%) CLA – 3 (15%) CLA – 4 (10%)#


Level 1 Remember

20% 20% 15% 15% 15% 15% 15% 15% 15% 15% Understand

Level 2 Apply

20% 20% 20% 20% 20% 20% 20% 20% 20% 20% Analyze

Level 3 Evaluate

10% 10% 15% 15% 15% 15% 15% 15% 15% 15% Create

Total 100 % 100 % 100 % 100 % 100 % # CLA – 4 can be from any combination of these: Assignments, Seminars, Tech Talks, Mini-Projects, Case-Studies, Self-Study, MOOCs, Certifications, Conf. Paper etc.,





Course Code


DIGITAL SIGNAL PROCESSING Course


L T P C

3 0 2 4


18ECC104T Co-requisite

Courses Nil

Progressive Courses

18ECE243J, 18ECE244J, 18ECE245T



CLR-1 : Understand the operations involved in digital conversion of analog signals. 1 2 3 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

CLR-2 : Realize a digital filter in direct, cascade and parallel forms. Perform efficient computation of DFT using radix 2 FFT

Leve

l of T

hink

ing

(Blo

om)

Exp

ecte

d P

rofic

ienc

y (%

)

Exp

ecte

d A

ttain

men

t (%

)

Eng

inee

ring

Kno

wle

dge

Pro

blem

Ana

lysi

s

Des

ign

& D

evel

opm

ent

Ana

lysi

s, D

esig

n, R

esea

rch

Mod

ern

Too

l Usa

ge

Soc

iety

& C

ultu

re

Env

ironm

ent &

Sus

tain

abili

ty

Eth

ics

Indi

vidu

al &

Tea

m W

ork

Com

mun

icat

ion

Pro

ject

Mgt

. & F

inan

ce

Life

Lon

g Le

arni

ng

PS

O–1

: Pro

fess

iona

l Ach

ieve

men

t

PS

O –

2: P

roje

ct M

anag

emen

t T

echn

ique

s

PS

O –

3: A

naly

ze &

Res

earc

h

CLR-3 : Design digital FIR filter using windowing technique and frequency sampling methods.

CLR-4 : Design IIR filters using both direct method and method involving conversion of analog filter to digital filter

CLR-5 : Understand sampling rate conversion and apply it for applications like QMF, sub band coding.

CLR-6 : Utilize the techniques for digital conversions, filter designs and multi rate signal processing to solve real time problems


CLO-1 : Determine the knowledge of sampling and quantization and understand the errors that arise due to quantization. 1 80 70 H - - - - - - - - - - - - - -

CLO-2 : Understand the concept of DFT and its efficient computation by using FFT algorithm. 1 75 70 - M - - - - - - - - - - - -

CLO-3 : Design FIR filters using several methods 3 75 70 - M H - - - - - - - - - - - H

CLO-4 : Design IIR filters using several methods 3 75 70 - H - - - - - - - - - - - H

CLO-5 : Discuss the basics of multirate DSP and its applications. 1 70 70 - M - - - - - - - - - - - - - CLO-6 : Apply the concepts of digital filter designs and multi rate signal processing for real time signals 2 70 70 - M - - - - - - - - - - M - -

Learning Unit / Module 1: Signals and Waveforms

Learning Unit / Module 2: Frequency Transformations

Learning Unit / Module 3: FIR Filters

Learning Unit / Module 4: IIR Filters

Learning Unit / Module 5: Multirate signal Processing


S-1

SLO-1 Basic Elements of DSP Realization of digital filters Direct form of realization

Design of Linear Phase FIR filters General consideration

Design of digital IIR filters Comparison of FIR and IIR filters

Introduction to Multirate signal processing

SLO-2 Advantages and applications of DSP Cascade form of realization Causality and its implication Characteristics of practical frequency selective filters

Analog IIR filter design Decimation

S-2

SLO-1 Continuous Time vs Discrete time signals Parallel form of realization Frequency response of symmetric FIR filter

Properties of Butterworth filters Interpolation

SLO-2 Continuous valued vs discrete valued signals

Introduction to DFT N is odd Properties of chebyshev filters Comparison of Butterworth and chebyshev filters

Spectrum of interpolated signal

S-3 SLO-1 Concepts of frequency in analog signals Computation of DFT

Frequency response of symmetric FIR filter

Analog IIR filter design Sampling rate conversion by a rational factor I/D

SLO-2 Continuous and discrete time sinusoidal signals

Properties of DFT Periodicity, linearity and symmetry properties

N is even Design of low pass Butterworth filter Anti-aliasing and anti-imaging filters

S-4 SLO-1

Lab 1 :Generation of basic signals Lab 7: Linear convolution Lab 13: Design of digital FIR Low Pass and High Pass filter using rectangular window

Lab 19: Design of analog Butterworth filter

Lab 25: Interpolation SLO-2

S-5 SLO-1

Lab 2: Unit step, ramp and impulse Lab 8: Circular convolution Lab14: Design of digital FIR Band Pass and Band Stop filter using rectangular window

Lab 20: Design of analog Chebyshev filter

Lab 26: Effect of interpolation in frequency domain SLO-2

S-6 SLO-1 Sampling of analog signals Sampling theorem

Circular convolution Frequency response of antisymmetric FIR filter

Analog IIR filter design

Polyphase structure of decimator Polyphase decimation using z transform


SLO-2 Aliasing Quantization of continuous amplitude signals

Matrix method and concentric circle method

N is odd and N is even Design of low pass Chebyshev filter Polyphase structure of interpolator Polyphase interpolation using z transform

S-7

SLO-1 Analog to digital conversion Sample and hold,

Efficient Computation of the DFT Design of FIR filters Fourier series method

Design of digital filters Impulse invariance method

Advantages of multirate DSP

SLO-2 Quantization and coding Divide and Conquer Approach to Computation of the DFT Using FFT

Need for filter design using window Comparison of various windowing techniques

Design of digital filters Bilinear transformation

Applications of multirate DSP

S-8 SLO-1 Oversampling A/D converters

N Point DFT Decimation-in-Time FFT Radix-2 FFT Algorithm

Filter Design using windowing technique Design of digital filters Impulse invariance method

Practical Applications of multirate DSP

SLO-2 Digital to analog conversion Sample and hold

N Point DFT Decimation-in-Frequency FFT

Rectangular window Design of digital filters Bilinear transformation

interfacing of digital systems with different sampling rates

S-9 SLO-1

Lab 3: Generation of waveforms Lab9: Autocorrelation and cross correlation

Lab 15: Design of digital FIR Low Pass and High Pass filter using Hanning and Hamming window

Lab 21: Design of digital Butterworth filter using impulse invariance method

Lab 27: Decimation SLO-2

S-10 SLO-1

Lab 4: Continuous and discrete time Lab10: Spectrum analysis using DFT Lab 16: Design of digital FIR Band Pass and Band Stop filter using Hanning and Hamming window

Lab 22: Design of digital Butterworth filter using bilinear transformation

Lab 28: Effect of decimation in frequency domain SLO-2

S-11 SLO-1 Oversampling D/A converters

Radix-2 FFT Algorithm Implementation of FFT Using DIT

Filter Design using windowing technique Hanning window

Design of digital Chebyshev filters Practical Applications of multirate DSP Sub band coding of speech signals

SLO-2 Quantization noise Implementation of FFT Using DIF Filter Design using windowing technique Hamming window

Impulse invariance method Filter banks Analysis filter bank

S-12 SLO-1 Errors due to truncation IDFT Filter Design using windowing technique Design of digital Chebyshev filters Synthesis filter bank

SLO-2 Probability of error Using DIT FFT Blackmann window Bilinear transformation Subband coding filterbank

S-13 SLO-1 Errors due to rounding IDFT Design of FIR filters

Frequency transformation in analog domain

Quadrature Mirror Filter

SLO-2 Probability of error Using DIF FFT Frequency sampling method Frequency transformation in digital domain

Alias free filter bank

S-14 SLO-1

Lab 5: Study of sampling theorem Lab 11: Efficient computation of DFT using FFT

Lab 17: Design of digital FIR Low Pass, High Pass, Band pass and band stop filter using Blackmann window

Lab 23: Design of digital Chebyshev filter using impulse invariance method

Lab 29: Design of anti-aliasing filter SLO-2

S-15 SLO-1

Lab 6: Aliasing effects Lab12: Computation of IDFT Lab 18: Design of digital FIR filter using frequency sampling method

Lab 24: Design of digital Chebyshev filter using bilinear transformation

Lab 30: Design of anti-imaging filter SLO-2

Learning Resources

1. John G. Proakis, Dimitris G. Manolakis, “Digital Signal Processing, Principles, Algorithms and Applications”, Pearson Education, 4th edition, 2014

2. Alan V. Oppenheim, Ronald W. Schafer, “Discrete-Time Signal Processing”, Pearson Education, 1st edition, 2015

3. Sanjit Mitra, “Digital Signal Processing –A Computer Based Approach”, McGraw Hill, India, 4th Edition, 2013. 4. Fredric J. Harris, “Multirate Signal Processing for Communication Systems”,1st edition, Pearson Education,

2007


Learning Assessment

Bloom’s

Level of Thinking


CLA – 1 (10%) CLA – 2 (15%) CLA – 3 (15%) CLA – 4 (10%)#


Level 1 Remember

20% 20% 15% 15% 15% 15% 15% 15% 15% 15% Understand

Level 2 Apply

20% 20% 20% 20% 20% 20% 20% 20% 20% 20% Analyze

Level 3 Evaluate

10% 10% 15% 15% 15% 15% 15% 15% 15% 15% Create

Total 100 % 100 % 100 % 100 % 100 %



1. Mr. Anuj Kumar, Bombardier Transportation, Ahmedabad, [email protected] 1. Dr. Meenakshi, Professor of ECE, CEG, Anna University, [email protected] Dr. M.S. Vasanthi,,SRMIST



Course Code


ANALOG AND DIGITAL COMMUNICATION Course


L T P C

3 0 2 4



Courses Nil

Progressive Courses

18ECC301T, 18ECC302J, 18ECE221T & 18ECE223T

Course Offering Department ECE Data Book / Codes/Standards Nil


CLR-1 : Introduce and Understand the need for modulation, various Amplitude modulators/demodulators, frequency modulators and demodulators

1 2 3 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

CLR-2 : Comprehend the radio transmitters and receivers using the modulators and demodulators and to analyze the noise performance

Leve

l of T

hink

ing

(Blo

om)

Exp

ecte

d P

rofic

ienc

y (%

)

Exp

ecte

d A

ttain

men

t (%

)

Eng

inee

ring

Kno

wle

dge

Pro

blem

Ana

lysi

s

Des

ign

& D

evel

opm

ent

Ana

lysi

s, D

esig

n, R

esea

rch

Mod

ern

Too

l Usa

ge

Soc

iety

& C

ultu

re

Env

ironm

ent &

Sus

tain

abili

ty

Eth

ics

Indi

vidu

al &

Tea

m W

ork

Com

mun

icat

ion

Pro

ject

Mgt

. & F

inan

ce

Life

Lon

g Le

arni

ng

PS

O–1

: Pro

fess

iona

l Ach

ieve

men

t

PS

O –

2: P

roje

ct M

anag

emen

t T

echn

ique

s

PS

O –

3: A

naly

ze &

Res

earc

h

CLR-3 : Introduce basics of Digital modulation and detection techniques

CLR-4 : Analyze the pass band data transmission techniques in terms of probability of error CLR-5 : Introduce basics of spread spectrum techniques and information theory concepts



CLO-1 : Understand the concepts of analog modulation and demodulation techniques 2 80 70 M - - - - - - - - H - - H - -

CLO-2 : Learn the function of radio transmitters and receivers and familiarize with noise performance of various receivers 2 85 75 - M H - - - - - - - - - H - - CLO-3 : Understand various digital modulation schemes and matched filter receiver 2 75 70 M - - - - - - - - - - - - M H

CLO-4 : Understand and analyze various digital pass band data transmission schemes 2 85 80 - - - M - - - - - - - - - M -

CLO-5 : Understanding data transmission using spread spectrum and error coding techniques 2 85 75 - H - - - - - - - - - - M - H

CLO-6 : Analyze the operation of analog and digital communication systems and take measurement of various communication systems to compare experimental results in the laboratory with theoretical analysis

2 85 75 - - H - H - - - H - - M - M H

Analog Modulation Radio Transmitters and Receivers Digital Modulation System and

Baseband Detection Passband Data Transmission

Spread Spectrum Techniques and Information theory Concepts

Duration (hour)

15 15 15 15 15

S-1

SLO-1 Modulation, Need for Modulation, AM transmitter : Low Level, Pulse modulation systems, Overview of PAM,PWM,PPM

Overview of ASK, FSK, PSK Spread spectrum Communications, Frequency Hopping Spread Spectrum (FHSS)

SLO-2 Amplitude Modulation, Types of Amplitude Modulation

AM transmitter : High Level Transmitter Pulse modulation systems, Overview of PAM,PWM,PPM

Overview of ASK, FSK, PSK Spread spectrum Communications, Frequency Hopping Spread Spectrum (FHSS)

S-2 SLO-1 Double sideband Full carrier FM transmitter: Direct Method

Pulse modulation systems, Sampling and quantization

Generation, Signal Space Diagram and detection of FSK

Direct Sequence Spread Spectrum (DSSS)

SLO-2 Double sideband Full carrier FM transmitter: Direct Method Pulse modulation systems, Sampling and quantization

Generation, Signal Space Diagram and detection of FSK

Direct Sequence Spread Spectrum (DSSS)

S-3

SLO-1 Double sideband Suppressed carrier FM transmitter: Indirect Method PCM systems Probability of Error for FSK Direct Sequence Spread Spectrum (DSSS)

SLO-2 Single sideband Suppressed carrier, VSB FM transmitter: Indirect Method Bandwidth of PCM, PCM TDM signal multiplexing, Limitations of PCM system

Probability of Error for FSK Code Division Multiple Access of DSSS

S 4-5

SLO-1 Lab-1: AM modulator and Demodulator Lab-4: Pre emphasis and De-emphasis Lab-7: DPCM and its Demodulation

Lab-10: QPSK Modulation and Demodulation

Lab-13: Mini Project SLO-2


S-6 SLO-1

Generation of AM waves: Linear method-Collector modulator

Classification of radio receiver, Functions and Characteristics of radio receiver

Data formatting Generation, Detection, Signal Space Diagram of PSK

Code Division Multiple Access of DSSS

SLO-2 Generation of AM waves: Linear method- Collector modulator

Tuned Radio Frequency receiver Data formatting Generation, Detection, Signal Space Diagram of PSK

OFDM Communication

S-7 SLO-1 Non-linear Modulation-Balanced Modulator Super-heterodyne receiver- AM Differential PCM (DPCM) Probability of Error for PSK OFDM Communication

SLO-2 Non-linear Modulation-Balanced Modulator Super-heterodyne receiver- AM Differential PCM (DPCM) Probability of Error for PSK OFDM Communication

S-8 SLO-1

Demodulation of AM waves : Linear diode detector

Super-heterodyne receiver- FM Delta modulation (DM) Generation, signal space diagram and detection of QPSK

Measures of Information

SLO-2 Demodulation of AM waves : Linear diode detector

Super-heterodyne receiver- FM Delta modulation (DM), Noise in DM Generation, signal space diagram and detection of QPSK

Measures of Information

S 9-10

SLO-1 Lab-2: DSB-SC modulator and demodulator

Lab-5: PAM,PPM,PWM modulation and demodulation

Lab-8: DM and its Demodulation Lab-11: DPSK Modulation and Demodulation

Lab-14: Model Practical Exam SLO-2

S-11 SLO-1 Frequency modulation, Types of FM Sources of Noise Demodulation and detection process Probability of Error for QPSK

Source encoding, Shannon’s Channel

capacity theorem

SLO-2 Narrow Band FM, Wide Band FM, Phase modulation

Sources of Noise Demodulation and detection process Probability of Error for QPSK

Shannon’s Channel capacity theorem

S-12 SLO-1 Generation of Narrowband FM Noise in AM (Envelope Detection),

Maximum likelihood receiver structure, Matched filter receiver

Generation, signal space diagram and

detection of π/4 QPSK Linear block codes

SLO-2 Generation of Narrowband FM Noise in AM (Envelope Detection), Maximum likelihood receiver structure, Matched filter receiver

Generation, signal space diagram and detection of π/4 QPSK Linear block codes

S-13 SLO-1

Demodulation of FM : Foster seely discriminator

Noise in FM Probability error of the Matched filter, Inter symbol interference, Eye pattern

Generation, signal space diagram and detection of QAM Cyclic codes

SLO-2 Demodulation of FM : Foster seely discriminator

Threshold effect, Pre-emphasis and De-emphasis

Probability error of the Matched filter, Inter symbol interference, Eye pattern

Generation, signal space diagram and detection of QAM Cyclic codes

S 14-15

SLO-1 Lab-3: FM Modulator and Demodulator

Lab-6: Pulse Code Modulation and Demodulation

Lab-9: PSK Modulation and Demodulation

Lab-12: BER performance analysis of various Modulation Schemes

Lab-15: University Practical Exam SLO-2

Learning Resources

1. Simon Haykin and Michael Moher, “Communication Systems,” 5th edition, John Wiley & Sons, 2013

2. Singh. R. P & Sapre. S. D, “Communication Systems: Analog & Digital,” 3rd edition, McGrawHill Education, Seventh Reprint, 2016.

3. Simon Haykin, “Communication Systems”, John Wiley & Sons, 4th Edition, 20008. 4. Bernard Sklar, “Digital Communication, Fundamentals and Application”, Pearson Education Asia,

2nd Edition, 2001

5. Taub & Schilling, “Principle of Communication Systems”, McGraw Hill Inc, 2nd Edition, 2003. 6. John G. Proakis, “Digital Communication”, McGraw Hill Inc, 5th Edition, 2008. 7. B.P. Lathi, “Modern Digital and Analog Communication System”, Oxford University Press, 3rd Edition, 2005. 8. Shu Lin, Daniel Costello, “Error control coding – Fundamentals and Applications”, Prentice Hall, Upper Saddle

River, NJ, 2nd Edition, 2004. 9. Lab Manual


Learning Assessment

Bloom’s

Level of Thinking


CLA – 1 (10%) CLA – 2 (15%) CLA – 3 (15%) CLA – 4 (10%)#


Level 1 Remember

20% 20% 15% 15% 15% 15% 15% 15% 15% 15% Understand

Level 2 Apply

20% 20% 20% 20% 20% 20% 20% 20% 20% 20% Analyze

Level 3 Evaluate

10% 10% 15% 15% 15% 15% 15% 15% 15% 15% Create

Total 100 % 100 % 100 % 100 % -



1. Mr. Anuj Kumar, Bombardier Transportation, Ahmedabad, [email protected] 1. Dr. Meenakshi, Professor of ECE, CEG, Anna University, [email protected] Mrs. S. Vasanthadev Suryakala, SRMIST



Course Code


VLSI Design Course


L T P C

3 0 2 4



Courses Nil

Progressive Courses

18ECE301J



CLR-1 : Use Verilog HDL as a design-entry language for FPGA in electronic design automation of digital circuits 1 2 3 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

CLR-2 : Design, construct and simulate VLSI adders and multipliers.

Leve

l of T

hink

ing

(Blo

om)

Exp

ecte

d P

rofic

ienc

y (%

)

Exp

ecte

d A

ttain

men

t (%

)

Eng

inee

ring

Kno

wle

dge

Pro

blem

Ana

lysi

s

Des

ign

& D

evel

opm

ent

Ana

lysi

s, D

esig

n, R

esea

rch

Mod

ern

Too

l Usa

ge

Soc

iety

& C

ultu

re

Env

ironm

ent &

Sus

tain

abili

ty

Eth

ics

Indi

vidu

al &

Tea

m W

ork

Com

mun

icat

ion

Pro

ject

Mgt

. & F

inan

ce

Life

Lon

g Le

arni

ng

PS

O–1

: Pro

fess

iona

l Ach

ieve

men

t

PS

O –

2: P

roje

ct M

anag

emen

t T

echn

ique

s

PS

O –

3: A

naly

ze &

Res

earc

h

CLR-3 : Understand MOSFET operation CLR-4 : Implement a given logic function using appropriate logic styles for improved performance

CLR-5 : Understand the basic processes in IC fabrication, steps in the fabrication of MOS ICs, and as well the layout design rules.

CLR-6 : Use modern engineering tools such as HSPICE / Modelsim / Xilinx to carry out design experiments and gain experience with the design and analysis of MOS circuits and systems.


CLO-1 : Design and implement digital circuits using Verilog HDL to simulate and verify the designs. 3 85 75 - H H - H - - - - - - - - - -

CLO-2 : Design general VLSI system components, adder cells and multipliers to address the design of datapath subsystem. 3 85 75 - H H - H - - - - - - - - - -

CLO-3 : Examine the characteristics of MOS transistors 2 80 70 H M - - - - - - - - - - - - -

CLO-4 : Analyze CMOS inverter and other complex logic gates designed using different logic styles 2 80 70 - L L - - - - - - - - - - - - CLO-5 : Explain how the transistors are built, and understand the physical implementation of circuits. 2 80 70 - L L - - - - - - - - - - - -

CLO-6 : Use HSPICE computer analysis program and Verilog HDL for simulation and analysis of MOS circuits and building blocks 3 85 75 - M M - H - - - H M L M - - M

Duration (hour)

Learning Unit / Module 1: Introduction to Verilog HDL & Coding

Learning Unit / Module 2: Subsystem Design

Learning Unit / Module 3: MOS Transistor

Learning Unit / Module 4: CMOS Inverter and Circuit Design

Styles

Learning Unit / Module 5:

15 15 15 15 15

S-1

SLO-1 Introduction to HDL & Verilog HDL General VLSI System Components: Multiplexers

Generic overview of the MOS device: MOS transistor symbols

CMOS Inverter Characteristics: Operation and properties of static CMOS inverter

Properties of basic materials used in microelectronics: Silicon, Silicon dioxide

SLO-2 Introduction to Verilog HDL, modules and ports

Decoders

MOS structure demonstrating (a) accumulation, (b) depletion, and (c) inversion; nMOS transistor demonstrating cutoff, linear, and saturation regions of operation

VTC of static CMOS inverter Polysilicon and Silicon Nitride

S-2 SLO-1

Lexical Conventions: White Space and Comments, Operators

Comparators MOS Transistor under Static Conditions: The threshold voltage

DC Inverter Calculations

Basic Processes in Integrated-Circuit Fabrication: Wafer Formation, Photolithography, Well and Channel Formation

SLO-2 Numbers, Strings, Identifiers, System Names, and Keywords

priority encoder Resistive operation Symmetrical Inverter Silicon Dioxide (SiO2), Isolation, Gate Oxide

S-3

SLO-1 Verilog Data Types: Nets, Register Variables, Constants

shift and rotate operations Saturation region Inverter switching characteristics Gate and Source/Drain Formations, Contacts and Metallization, Passivation, Metrology

SLO-2 Referencing Arrays of Nets or Regs Adders: Standard adder cells Current-voltage characteristics Output capacitance Some Recurring Process Steps: Diffusion and Ion Implantation, Deposition, Etching, Planarization

S-4, 5 SLO-1 Lab-0: Verilog Operators: Lab-6: Realization of VLSI multipliers - I


SLO-2

Arithmetic Operators, Bitwise Operators, Reduction Operators, Logical Operators, Relational Operators, Shift Operators, Conditional Operator, Concatenation Operator, Expressions and Operands, Operator Precedence

Lab-3: Design using FSM and ASM charts

Lab-9: Design and Analysis of CMOS Inverter using HSPICE

Lab-12: Design and Analysis of 4-input Dynamic NAND gate using HSPICE

S-6 SLO-1 Verilog modelling: Gate-level modelling Ripple Carry Adder (RCA)

Dynamic behavior: MOSFET Capacitances, viz., MOS structure capacitances

Secondary Parasitic Effects: Leakage Currents, Parasitic Resistances

Simplified CMOS Process flow

SLO-2 Realization of Combinational and sequential circuits

Carry Look-Ahead Adder (CLA) Channel capacitance and Junction (or, depletion) capacitances

Inverter layout

S-7 SLO-1

Compilation and simulation of Verilog code

Carry Select Adder (CSL) Parasitic Resistances, viz., Drain and Source Resistance, Contact Resistance

Power-Delay Product: Static Power Consumption

Layout design rules: Well rules, transistor rules

SLO-2 Test bench Carry Save Adder (CSA) Non-ideal I-V effects: Mobility Degradation, Velocity Saturation

Dynamic Power Consumption, Total Power Consumption, PDP

Contact rules, metal rules, via rules and other rules

S-8

SLO-1 Dataflow modelling Carry Skip Adder (CSK) Channel Length Modulation, Threshold Voltage Effects

CMOS Circuit Design Styles: Static CMOS logic styles

Gate Layouts


Carry Bypass Adder (CBA) Leakage, Temperature Dependence, Geometry Dependence, Subthreshold Current

CMOS circuits, pseudo-nMOS, tristate circuits, clocked CMOS circuits

Stick diagrams

S-9, 10

SLO-1 Lab-1: Realization of combinational and sequential circuits using gate-level and dataflow modeling

Lab-4: Realization of VLSI adders - I Lab-7: Realization of VLSI multipliers - II

Lab-10: (a) Design and Analysis of complex CMOS gate using HSPICE (b) Design and Analysis of Pseudo-NMOS gates using HSPICE

Lab-13: Model Practical Examination SLO-2

S-11 SLO-1 Behavioral modelling

Multipliers: Overview of multiplication (unsigned multiplication, shift/add multiplication algorithms, multiplication of signed numbers, types of multiplier architectures)

Short-channel MOSFETS: Hot carriers, Lightly-Doped Drain (LDD)

Differential Cascade Voltage Switch Logic (DCVSL), Pass Transistor Logic (PTL)

CMOS Process Enhancements: Transistors (Multiple Threshold Voltages and Oxide Thicknesses, Silicon-on-Insulator, High-k Gate Dielectrics, Higher Mobility, Plastic Transistors,)


Braun multiplier MOSFET scaling Dynamic CMOS logic styles: Basic dynamic logic

S-12

SLO-1 Switch-level modelling Baugh-Wooley multiplier Short-channel effects: Negative Bias Temperature Instability (NBTI), oxide breakdown

Signal integrity issues in dynamic design Interconnects

SLO-2 Realization of MoS circuits Wallace Tree multiplier Drain-Induced Barrier Lowering (DIBL), Gate-Induced Drain Leakage (GIDL), Gate Tunnel Current

Signal integrity issues in dynamic design Circuit elements

S-13 SLO-1 Design using FSM Booth multiplier Tutorials

Domino Logic Circuits: Differential Domino logic, multiple-output domino

Beyond conventional CMOS

SLO-2 Realization of sequential circuits Booth multiplier Tutorials Compound domino, NORA, TSPC Tutorials

S-14, 15

SLO-1 Lab-2: (a) Realization of digital circuits using behavioral modeling (b) Realization of MOS circuits using switch-level mdeling

Lab-5: Realization of VLSI adders - II Lab-8: Realization of RAM & ROM

Lab-11: (a) Design and Analysis of AND/NAND gate in DCVSL using SPICE (b) Design and Analysis of Pass-Transistor gates and CPL gates using HSPICE

Lab-14: End-Semester Practical Examination SLO-2

Learning Resources

1. Jan Rabaey, Anantha Chandrakasan, B Nikolic, “Digital Integrated Circuits: A Design Perspective”. Second Edition, Feb 2003, Prentice Hall of India.

2. Weste, Harris, “CMOS VLSI Design: A Circuits and Systems Perspective”, 4th edition, Addision-Wesley, 2011.

3. Wayne Wolf, “Modern VLSI Design: IP-based Design”, 4th edition, PHI, 2009.

4. R. Jacob Baker, “CMOS Circuit Design, Layout, and Simulation”, Wiley, (3/e), 2010. 5. John P. Uyemura, “CMOS Logic Circuit Design”, Kluwer, 2001. 6. S. Palnitkar , Verilog HDL – A Guide to Digital Design and Synthesis, Pearson , 2003 7. Paul. R.Gray, Robert G. Meyer, “Analysis and Design of Analog Integrated Circuits”, Wiley, (4/e), 2001. 8. M.D.Ciletti , Modeling, Synthesis and Rapid Prototyping with the Verilog HDL, Prentice Hall, 1999


Learning Assessment

Bloom’s

Level of Thinking



Level 1 Remember

20% 20% 15% 15% 15% 15% 15% 15% 15% 15% Understand

Level 2 Apply

20% 20% 20% 20% 20% 20% 20% 20% 20% 20% Analyze

Level 3 Evaluate

10% 10% 15% 15% 15% 15% 15% 15% 15% 15% Create

Total 100 % 100 % 100 % 100 % 100 %




2. Mr. Hariharasudhan - Johnson Controls, Pune, [email protected] 2. Dr. Venkatesan, Sr. Scientist, NIOT, Chennai, [email protected] 2. Dr. J. Manjula, SRMIST


Course Code


WIRELESS COMMUNICATION Course


L T P C

3 1 0 4


18ECC205J, 18ECC105T Co-requisite

Courses Nil

Progressive Courses

18ECE220T



CLR-1 : Understand the elements of Wireless Communication and mobile communications 1 2 3 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 CLR-2 : Understand the Mobile Radio Wave Propagation - Large Scale Fading

Leve

l of T

hink

ing

(Blo

om)

Exp

ecte

d P

rofic

ienc

y (%

)

Exp

ecte

d A

ttain

men

t (%

)

Eng

inee

ring

Kno

wle

dge

Pro

blem

Ana

lysi

s

Des

ign

& D

evel

opm

ent

Ana

lysi

s, D

esig

n, R

esea

rch

Mod

ern

Too

l Usa

ge

Soc

iety

& C

ultu

re

Env

ironm

ent &

Sus

tain

abili

ty

Eth

ics

Indi

vidu

al &

Tea

m W

ork

Com

mun

icat

ion

Pro

ject

Mgt

. & F

inan

ce

Life

Lon

g Le

arni

ng

PS

O–1

: Pro

fess

iona

l

Ach

ieve

men

t P

SO

– 2

: Pro

ject

Man

agem

ent

Tec

hniq

ues

PS

O –

3: A

naly

ze &

Res

earc

h

CLR-3 : Analyze how to apply Mobile Radio Wave Propagation - Small Scale Fading

CLR-4 : Study the Capacity and Diversity concepts in wireless communications

CLR-5 : Acquire the knowledge of Wireless System and Standards

CLR-6 : Understand and design various wireless systems


CLO-1 : Acquire the knowledge of Wireless communication and basic cellular concepts 2 75 60 H - - - - - - - - - - M M - L

CLO-2 : Understand` the essential Radio wave propagation and mobile channel models 2 75 60 H H H H - - - - - - - M M - H

CLO-3 : Familiarize about Various performance analysis of mobile communication system. 2 75 60 H H H - - - - - - - - - - - H

CLO-4 : Attain the knowledge of Diversity and capacity concepts 2 75 60 H H - - - - - - - - - - - - H

CLO-5 : Be familiar with the various standards of Mobile Communication Systems 2 75 60 H - - - - - - - - - - M M - L CLO-6 : Explore the various concepts of wireless communication, its design with respect to fading and link performance 2 75 60 H H H H M - - - - M - M M - H

Duration (hour)

Wireless communication: Mobile communications

Large Scale Fading Small Scale Fading Improvement on Link performance Wireless systems and standards

12 12 12 12 12

S-1 SLO-1

Introduction to wireless communication and mobile radio communication

Introduction to Radio wave Propagation Introduction Small scale multipath propagation Introduction to diversity, equalization and

capacity AMPS Voice modulation Process

SLO-2 Classification of wireless communications - simplex, half duplex, dull duplex

Large scale and small scale fading Impulse response model of multipath channel

S-2 SLO-1 Paging and Cordless systems

Friis transmission equation- Free space propagation model - pathloss model

Impulse response model of multipath channel

Space diversity GSM system architecture and its interfaces

SLO-2 Cellular telephone systems Small scale multipath measurements - Direct Pulse measurement

Scanning diversity

S-3 SLO-1 Timing diagram - landline to mobile

Two Ray model

Small scale multipath measurements - Sliding correlator measurement

Maximal ratio combiner GSM frame structure

SLO-2 Timing diagram - mobile to mobile Small scale multipath measurements - Swept frequency measurement

Equal gain diversity

S-4 SLO-1

Basic antenna parameters, Far field and near field

Simplified pathloss model Parameters of mobile multipath channels - Time dispersion and Coherent bandwidth

Rake Receiver GSM speech operations input - output SLO-2

Frequency reuse, sectored and omni-directional antennas

Emperical model - Okumara

S-5 SLO-1 Channel assignment strategies Emperical model - Hata model

Parameters of mobile multipath channels - Doppler spread and Coherent time

Capacity in AWGN Forward CDMA process SLO-2 Handoff and its types

Emperical model - Walfish and bertoni model

S-6 SLO-1

Interference and system capacity Piecewise linear model - log normal model Types of fading: Flat and Frequency selective fading

Capacity of flat fading channels

Reverse CDMA Process SLO-2


S-7 SLO-1

Trunking and Grade of Service Shadowing Types of fading: Flat and Frequency

selective fading Equalizer and its mode Multicarrier modulation

SLO-2 Combined pathloss and shadowing

S-8 SLO-1 Cell splitting

Outage Probabilty Types of fading: Fast and Slow fading Adaptive equalizer block diagram OFDM Transmitter Block diagram

SLO-2

S-9 SLO-1

Sectoring Cell Coverage Area Types of fading: Fast and Slow fading Types of Equalizers - elementary level only OFDM Receiver Block diagram SLO-2

S-10 SLO-1 Microcell zone concepts

Solving problems – Brewster angle Ricean distribution Introduction to MIMO antennas Importance of Cyclic Prefix

SLO-2

S-11 SLO-1

Umbrella cells Solving problems –empirical model Rayleigh distribution Introduction to MIMO antennas Case study - Modern antennas SLO-2

S-12 SLO-1

Solving Problems Solving problems – friis transmission formula

Solving problems – Doppler effect Case study :Recent trends in Diversity and MIMO antennas

Case study - Modern antennas SLO-2

Learning Resources

1. Rappaport.T.S., ”Wireless Communications: Principles and Practice”, 2nd Edition, Pearson, 2011. 2. John D Kraus , Ronald J Marhefka, Ahmed S Khan “Antenna and Wave Propagation”, 4th Edition, Tata

McGraw Hill, 2010 3. Constantine Balanis. A, “Antenna Theory: Analysis and Design”, 3rd Edition, John Wiley, 2012. 4. Andreas.F.Molisch., "Wireless Communications", Wiley, 2nd Edition-2005, Reprint-2014

5. Andrea Goldsmith, “ Wireless Communications”, Cambridge University Press, Aug 2005 6. Schiller, "Mobile Communications", Pearson Education Asia Ltd., Reprint 2012 7. Lee W.C.Y., " Mobile Communications Engineering: Theory and Applications", McGraw Hill, New York,

2nd Edition, 1998

Learning Assessment

Bloom’s

Level of Thinking


CLA – 1 (10%) CLA – 2 (15%) CLA – 3 (15%) CLA – 4 (10%)#


Level 1 Remember

40 % - 30 % - 30 % - 30 % - 30% - Understand

Level 2 Apply

40 % - 40 % - 40 % - 40 % - 40% - Analyze

Level 3 Evaluate

20 % - 30 % - 30 % - 30 % - 30% - Create


Course Designers


1. Mr. Anuj Kumar, Bombardier Transportation, Ahmedabad, [email protected] 1. Dr. Meenakshi, Professor of ECE, CEG, Anna University, [email protected] 1. Dr. Sandeep Kumar P, SRMIST

2. Mr. Hariharasudhan - Johnson Controls, Pune, [email protected] 2. Dr. Venkatesan, Sr. Scientist, NIOT, Chennai, [email protected] 2. Dr. T. Ramarao, SRMIST


Course Code

18ECC302J

Course Name

MICROWAVE & OPTICAL COMMUNICATIONS Course


L T P C

3 0 2 4



Courses Nil

Progressive Courses

18ECE226T & 18ECE323T



CLR-1 : Identify Microwave active devices and Microwave generators 1 2 3 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

CLR-2 : Analyze Microwave passive devices

Leve

l of T

hink

ing

(Blo

om)

Exp

ecte

d P

rofic

ienc

y (%

)

Exp

ecte

d A

ttain

men

t (%

)

Eng

inee

ring

Kno

wle

dge

Pro

blem

Ana

lysi

s

Des

ign

& D

evel

opm

ent

Ana

lysi

s, D

esig

n, R

esea

rch

Mod

ern

Too

l Usa

ge

Soc

iety

& C

ultu

re

Env

ironm

ent &

Sus

tain

abili

ty

Eth

ics

Indi

vidu

al &

Tea

m W

ork

Com

mun

icat

ion

Pro

ject

Mgt

. & F

inan

ce

Life

Lon

g Le

arni

ng

PS

O–1

: Pro

fess

iona

l

Ach

ieve

men

t P

SO

– 2

: Pro

ject

Man

agem

ent

Tec

hniq

ues

PS

O –

3: A

naly

ze &

Res

earc

h

CLR-3 : Explore Microwave Measurements

CLR-4 : Analyze Optical Fibers Optical Sources, Amplifier and Transmitter Optical Detectors , Receiver and Performance Measurements

CLR-5 : Explore Optical Communication System Design and Concepts

CLR-6 : Analyze Microwave and optical components


CLO-1 : Acquire knowledge on the theory of microwave transmission, microwave generators and associated components. 2 80 70 H - - L - - - - - - - - - - L

CLO-2 : Analyse microwave passive devices and components. 2 80 70 H M H H - - - - - - - - L - M

CLO-3 : Understand microwave measurements and associated techniques with equipment 2 80 70 H M H M - - - - - - - - M - H

CLO-4 : Familiarize with the fundamentals of light transmission through fiber 2 80 70 H H - M - - - - - - - - L - L

CLO-5 : Design a basic optical communication system. 2 80 70 H H - H - - - - - - - - M - M

CLO-6: Understand the working principle of microwave components , Microwave measurements, optical sources, detector and fibers

2 80 70 H H H H - - - - - - - - M - H

Duration (hour)

15 15 15 15 15

S-1 SLO-1 Introduction to microwaves and optical

communications

High frequency parameters: S parameters and S matrix analysis for N-port microwave device

Impedance matching. Elements of Optical fiber communication Point-to-Point link –Analog system design considerations and design steps SLO-2

S-2 SLO-1 History of Microwave Engineering,

Microwave transmission and Applications; Maxwell Equations

Directional coupler VSWR and Impedance measurement Functional block diagram of a Transmitter and receiver module

Point-to-Point link – Digital system design considerations and design steps SLO-2

S-3 SLO-1 Microwave Tubes

E and H plane Tee Measurement of Power Optical fiber structure, Light Propagation in Optical fibers: Ray theory , Total Internal reflection, Skew rays

Digital Link Design: Link power budget SLO-2 Klystron amplifier

S-4-5 SLO-1

Lab- 1 Characteristics of Reflex Klystron

Lab- 4 Gain and radiation pattern of Horn antenna

Lab- 7 Practice session Lab- 10 Measurement of Numerical Aperture, propagation and bending losses of optical fiber

Lab- 13 Design of basic Optical Communication system using computational tool SLO-2

S-6 SLO-1

Reflex Klystron oscillators Magic Tee Measurement of Frequency and Q factor Optical Sources: Light source materials, LED Structures

Rise time budget SLO-2

S-7 SLO-1

Magnetron oscillators Microwave Circulators, Isolators Insertion loss measurements LED Characteristics Overview of Analog links: Radio over Fiber; SLO-2

S-8 SLO-1 Microwave Bipolar Transistors

Field effect transistor Attenuators and Phase Shifters Attenuation measurements

Semiconductor Laser Diode, Laser Characteristics

Key link parameters SLO-2


S-9-10

SLO-1 Lab- 2 Study of power distribution in Directional coupler, E plane, H plane and Magic Tee

Lab- 5 Characteristics of filters, Microstrip patch antenna and parallel line coupler

Lab- 8 DC characteristics of LED and Laser diode

Lab- 11 Analysis of Analog optical link Lab- 14 Practice Session SLO-2

S-11 SLO-1

IMPATT, TRAPATT and Tunnel diode Rectangular Waveguides Measurement of Scattering parameters Optical Detectors: PIN and APD photo detector

Multichannel System: Need for multiplexing

SLO-2 Operational principles of WDM, DWDM

S-12 SLO-1

Gunn diode Rectangular Waveguides Measurement of Scattering parameters Responsivity and efficiency of APD WDM Components: Coupler/Splitter, Fabry Perot Filter SLO-2

S-13 SLO-1

Gunn Oscillation modes Power Dividers Functioning details of Vector Network Analyzer; Signal Analyzer; Spectrum analyzers

Fiber attenuation and dispersion WDM Components: Optical MEMS switches SLO-2

S-14-15

SLO-1 Lab- 3 Impedance measurement by slotted line method

Lab- 6 Design of RF Filters and Amplifier using computational tool

Lab- 9 DC characteristics of PIN and APD photo-diode

Lab- 12 Analysis of Digital optical link Lab- 15 Study experiment - Gunn Diode (Microwave) and Optical WDMA (Optical) SLO-2

Learning Resources

1. David M. Pozar, “Microwave Engineering”, 4th Edition, John Wiley & Sons, 2012. 2. David M. Pozar, “Microwave & RF Design of Wireless Systems”, John Wiley & Sons, 2001. 3. Samuel Y. Liao, “Microwave Devices and Circuits”, 3rd Edition, Pearson Education, 2013. 4. Robert. E. Collin, “Foundations for Microwave Engineering”, 2nd edition, Wiley, Reprint 2014. 5. Annapurna Das, Sisir K. Das, “Microwave Engineering”, 3rd Ed., McGraw Hill, 2015. 6. I. Hunter, “Theory and design of microwave filters”, The Institution of Engineering &Technology,

2001. 7. Keiser G, “Optical Fiber Communication Systems”, 5th Edition, 6th Reprint, McGraw Hill

Education (India), 2015.

8. Vivekanand Mishra, Sunita P. Ugale, “Fiber Optic Communication: Systems and Components”, Wiley-India, 1st edition, 2013

9. Djafar.K. Mynbaev and Lowell and Scheiner, “Fiber Optic Communication Technology”, Pearson Education Asia, 9th impression, 2013

10. John M. Senior, “ Optical fiber Communications: Principles and Practice”, Pearson Education, 3rd Edition, 2009

11. R.P. Khare, “Fiber Optics and Optoelectronics”, Oxford University Press, 2007. 12. 12. Rajiv Ramaswami, Kumar N. Sivaranjan, Galen H.Sasaki "Optical Networks A practical perspective",

3nd edition, 2013

Learning Assessment

Bloom’s

Level of Thinking



Level 1 Remember

20% 20% 15% 15% 15% 15% 15% 15% 15% 15% Understand

Level 2 Apply

20% 20% 20% 20% 20% 20% 20% 20% 20% 20% Analyze

Level 3 Evaluate

10% 10% 15% 15% 15% 15% 15% 15% 15% 15% Create

Total 100 % 100 % 100 % 100 % 100 %


Course Designers


1. Mr. Anuj Kumar, Bombardier Transportation, Ahmedabad, [email protected] 1. Dr. Meenakshi, Professor of ECE, CEG, Anna University, [email protected] 1. Dr. P. Sandeep Kumar, SRMIST

2. Mr. Hariharasudhan - Johnson Controls, Pune, [email protected] 2. Dr. Venkatesan, Sr. Scientist, NIOT, Chennai, [email protected] 2. Dr. T. Ramarao, SRMIST


Course Code


COMPUTER COMMUNICATION NETWORKS Course


L T P C

3 0 2 4


18CSS101J Co-requisite

Courses Nil

Progressive Courses

18ECE320T



CLR-1 : Introduce the basic concepts in the field of computer networks. 1 2 3 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 CLR-2 : Understand the functional aspects of OSI model architecture.

Leve

l of T

hink

ing

(Blo

om)

Exp

ecte

d P

rofic

ienc

y (%

)

Exp

ecte

d A

ttain

men

t (%

)

Eng

inee

ring

Kno

wle

dge

Pro

blem

Ana

lysi

s

Des

ign

& D

evel

opm

ent

Ana

lysi

s, D

esig

n, R

esea

rch

Mod

ern

Too

l Usa

ge

Soc

iety

& C

ultu

re

Env

ironm

ent &

Sus

tain

abili

ty

Eth

ics

Indi

vidu

al &

Tea

m W

ork

Com

mun

icat

ion

Pro

ject

Mgt

. & F

inan

ce

Life

Lon

g Le

arni

ng

PS

O–1

: Pro

fess

iona

l

Ach

ieve

men

t P

SO

– 2

: Pro

ject

Man

agem

ent

Tec

hniq

ues

PS

O –

3: A

naly

ze &

Res

earc

h

CLR-3 : Acquire knowledge of the Network Layer protocols

CLR-4 : Analyze the various issues and challenges of Transport Layer.

CLR-5 : Familiarize the various Application Layer Protocols.

CLR-6: Utilize the networking concepts to analyze the performance of Routing protocols.


CLO-1 : Express the basic services and concepts related to internetworking. 1 60 65 - - - - - - H - - - - M - - -

CLO-2 : Explain the basic OSI model architecture and its lower layer functions. 1 60 65 - - M - - - L - - - - - - - H

CLO-3 : Illustrate the various Network Layer concepts, mechanisms and protocols. 2 65 65 - - H - - L M - - - - - - - -

CLO-4 : Describe the services and techniques of Transport Layer. 1 60 65 - - - - - - M - - - - - - - H

CLO-5 : Discuss the various services and protocols in Application Layer. 1 60 65 - - M - - - - - - - - - - - H CLO-6 : Analyze the various Networking concepts and Routing protocols. 2 60 65 - - - - L - - - - - - M - - H

Duration (hour)

DATA COMMUNICATION & NETWORKING BASICS

OSI LOWER LAYERS

NETWORK LAYER TRANSPORT LAYER APPLICATION LAYER

15 15 15 15 15

S-1 SLO-1

Introduction to Data Communication and Networking

Network models Introduction to Network Layer Introduction to Transport Layer Introduction to Application Layer

SLO-2 Data transfer modes-Serial and Parallel transmission

OSI layer architecture Need for Internetworking TCP/IP Model Application Layer Paradigms

S-2 SLO-1 Protocols & Standards Data Link Layer-Introduction Addressing-Classful User Datagram Protocol(UDP) Client Server Interaction

SLO-2 Layered Architecture Link Layer Addressing Addressing-Classful User Datagram Protocol(UDP) Client Server Interaction

S-3 SLO-1 Principles of Layering & Description Error Detection Addressing-Classless Transmission Control Protocol(TCP) SIP

SLO-2 Brief description of concepts in OSI & TCP/IP model

Error Detection Addressing-Classless Transmission Control Protocol(TCP) SIP

S 4-5

SLO-1 Lab 1: To build and configure a simple network of four nodes connected with point-to-point links.

Lab 4: To simulate token ring protocol and to study its performance.

Lab 7:To simulate CSMA/CA protocol and to study its performance

Lab 10: Implementation and study of Selective Repeat protocol.

Lab 13: Create a Socket (TCP&UDP) between two computers and enable file transfer between them. SLO-2

S-6 SLO-1

Switching Types- Circuit- & Packet switching

Error Correction Network Layer Protocol-IPV4 TCP Services & Features Compression Techniques

SLO-2 Switching Types- Message switching, Comparison of switching types

Error Correction Internet Protocol(IP)-IPV4 TCP Services & Features Compression Techniques

S-7 SLO-1 LAN, MAN & WAN Data link control-LLC Internet Protocol(IP)-IPV6 Congestion Control Introduction to Cryptography


SLO-2 LAN, MAN & WAN Data link control-LLC Internet Protocol(IP)-IPV6 Congestion Control Types, Attacks and Services

S-8 SLO-1 Network topologies-Types Data link control-MAC

Routing Protocols- Distance Vector& Link State

Congestion Control DES

SLO-2 Comparison of topologies Data link control-MAC Routing Issues-Delivery, Forwarding and Routing

Congestion Control DES

S 9-10

SLO-1 Lab 2: To simulate star and bus network topologies.

Lab 5: Implementation of Error detection and Correction scheme.

Lab 8: Implementation and study of stop and wait protocols

Lab 11: To configure a network using Link State Routing protocol .

Lab 14: Implementation of Data Encryption and Decryption. SLO-2

S-11 SLO-1 IEEE standards for LAN-Ethernet Flow & Error Control Protocol Routing Information Protocol-RIP QOS-Quality of Service RSA

SLO-2 Types of Ethernet Flow & Error Control Protocol Routing Information Protocol-RIP QOS-Quality of Service RSA

S-12 SLO-1 Token Bus ARQ Schemes Open Shortest Path First-OSPF Techniques to improve QOS Email

SLO-2 Token Ring ARQ Schemes Open Shortest Path First-OSPF Techniques to improve QOS FTP

S-13 SLO-1 FDDI HDLC Border Gateway Protocol-BGP Techniques to improve QOS HTTP

SLO-2 FDDI HDLC Border Gateway Protocol-BGP Techniques to improve QOS SNMP

S 14-15

SLO-1 Lab 3: To simulate token bus protocol and to study its performance.

Lab 6:To simulate CSMA/CD protocol and to study its performance

Lab 9: Implementation and study of Go back N protocol.

Lab 12: To configure a network using Distance Vector Routing protocol.

Lab 15: Mini Project SLO-2

Learning Resources

1. Behrouz A.Fehrouzan, “Data communication & Networking”, Mc-Graw Hill, 5th Edition Reprint, 2014.

2. Andrew S.Tanenbaum, “Computer Networks”, Pearson Education India, 5th Edition, 2013.

3. William Stallings, “Data & Computer Communication”, Pearson Education India, 10th Edition, 2014. 4. James F. Kurose, Keith W. Ross, “Computer Networking: A Top–Down Approach Featuring the Internet”,

Pearson Education,6th Edition, 2013. 5. “Lab Manual” , Department of ECE, SRM Institute of Science and Technology

Learning Assessment

Bloom’s

Level of Thinking


CLA – 1 (10%) CLA – 2 (15%) CLA – 3 (15%) CLA – 4 (10%)#


Level 1 Remember

20% 20% 15% 15% 15% 15% 15% 15% 15% 15% Understand

Level 2 Apply

20% 20% 20% 20% 20% 20% 20% 20% 20% 20% Analyze

Level 3 Evaluate

10% 10% 15% 15% 15% 15% 15% 15% 15% 15% Create

Total 100 % 100 % 100 % 100 % 100 %


Course Designers


1. Mr. Anuj Kumar, Bombardier Transportation, Ahmedabad, [email protected] 1. Dr. Meenakshi, Professor of ECE, CEG, Anna University, [email protected] 1. Ms. T. Ramya, SRMIST



Course Code


COMPREHENSION Course


L T P C 0 1 0 1


NIL Co-requisite

Courses NIL Progressive Courses NIL


Course Learning Rationale (CLR):

The purpose of learning this course is to: Learning Program Learning Outcomes (PLO)

CLR-1 : Acquire skills to solve real world problems in Analog and Digital Electronics (Discrete & IC) 1 2 3 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

CLR-2 : Acquire skills to solve real world problems in Analog and Digital Communication

Leve

l of T

hink

ing

(Blo

om)

Exp

ecte

d P

rofic

ienc

y (%

)

Exp

ecte

d A

ttain

men

t (%

)

Eng

inee

ring

Kno

wle

dge

Pro

blem

Ana

lysi

s

Des

ign

& D

evel

opm

ent

Ana

lysi

s, D

esig

n, R

esea

rch

Mod

ern

Too

l Usa

ge

Soc

iety

& C

ultu

re

Env

ironm

ent &

Sus

tain

abili

ty

Eth

ics

Indi

vidu

al &

Tea

m W

ork

Com

mun

icat

ion

Pro

ject

Mgt

. & F

inan

ce

Life

Lon

g Le

arni

ng

PS

O -

1

PS

O -

2

PS

O -

3

CLR-3 : Acquire skills to solve real world problems in Signals & Systems, and DSP

CLR-4 : Acquire skills to solve real world problems in Microprocessors & Microcontrollers, and VLSI Design

CLR-5 : Acquire skills to solve real world problems in Electromagnetics and Transmission Lines

CLR-6 : Acquire skills to solve real world problems in Microwave and Optical Communications

Course Learning Outcomes (CLO):

At the end of this course, learners will be able to:

CLO-1 : Practice and gain confidence and competence to solve problems in Analog and Digital Electronics (Discrete & IC) 3 85 80 H H H L L L L L L L L L M L M

CLO-2 : Practice and gain confidence and competence to solve problems in Analog and Digital Communication 3 85 80 H H M L L L L L L L L L M M M

CLO-3 : Practice and gain confidence and competence to solve problems in Signals & Systems, and DSP 3 85 80 H H M L L L L L L L L L M L M

CLO-4 : Practice and gain confidence and competence to solve problems in Microprocessors & Microcontrollers, and VLSI Design 3 85 80 H H M L L L L L L L L L M M M

CLO-5 : Practice and gain confidence and competence to solve problems in Electromagnetics and Transmission Lines 3 85 80 H H H L L L L L L L L L M L M CLO-6 : Practice and gain confidence and competence to solve problems in Microwave and Optical Communications 3 85 80 H H M L L L L L L L L L M M M


S-1 SLO-1

Tutorial on Analog Electronics (Discrete & IC)

Tutorial on Digital Communication Tutorial on Microprocessors & Interfacing

Tutorial on Transmission Lines Tutorial on Optical Communication

SLO-2 Problem Solving Problem Solving Problem Solving Problem Solving Problem Solving

S-2 SLO-1 Tutorial on Digital Electronics Tutorial on Signals and Systems

Tutorial on Microcontrollers & Interfacing

Tutorial on VLSI Design Model Test

SLO-2 Problem Solving Problem Solving Problem Solving Problem Solving Model Test

S-3 SLO-1 Tutorial on Analog Communication Tutorial on Digital Signal Processing Tutorial on Electromagnetics Tutorial on Microwave Communication Final Test

SLO-2 Problem Solving Problem Solving Problem Solving Problem Solving Final Test

Learning Resources

1. R.S.Khurmi, J.K.Gupta, Mechanical Engineering: Conventional and Objective Types, S.Chand & Co., 2018

2. R.K.Jain, Conventional & Objective Type Question & Answers on Mechanical Engineering for Competitions, Khanna Publishers, 2014

Learning Assessment

Bloom’s

Level of Thinking


CLA – 1 (10%) CLA – 2 (15%) CLA – 3 (15%) CLA – 4 (10%)#


Level 1 Remember

- 40% - 30% - 30% - 30% - 30% Understand

Level 2 Apply

- 40% - 40% - 40% - 40% - 40% Analyze

Level 3 Evaluate

- 20% - 30% - 30% - 30% - 30% Create

Total 100 % 100 % 100 % 100 % 100 %



Course Designers


1. Mr. Anuj Kumar, Bombardier Transportation, Ahmedabad, [email protected] 1. Dr. Meenakshi, Professor of ECE, CEG, Anna University, [email protected] Mr. Manikandan AVM, SRMIST

2. Mr. Hariharasudhan - Johnson Controls, Pune, [email protected] 2. Dr. Venkatesan, Sr. Scientist, NIOT, Chennai, [email protected] Dr. V. Nithya, SRMIST



2018 Regulations

Professional Elective Courses (E)




Course Code

18ECE250T Course Name

PRINCIPLES OF CYBER PHYSICAL SYSTEM Course

Category E Professional Elective

L T P C

3 0 0 3



Courses NIL

Progressive Courses

NIL

Course Offering Department Electronics and Communication Data Book / Codes/Standards NIL


CLR-1 : Obtain cyber physical systems fundamentals and principles knowledge as building blocks to promote further design and implementation of more complex real time systems.

1 2 3 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

CLR-2 : Understand cyber physical systems design for synchronous model with specific case study for arm processor.

Leve

l of T

hink

ing

(Blo

om)

Exp

ecte

d P

rofic

ienc

y (%

)

Exp

ecte

d A

ttain

men

t (%

)

Eng

inee

ring

Kno

wle

dge

Pro

blem

Ana

lysi

s

Des

ign

& D

evel

opm

ent

Ana

lysi

s, D

esig

n, R

esea

rch

Mod

ern

Too

l Usa

ge

Soc

iety

& C

ultu

re

Env

ironm

ent &

Sus

tain

abili

ty

Eth

ics

Indi

vidu

al &

Tea

m W

ork

Com

mun

icat

ion

Pro

ject

Mgt

. & F

inan

ce

Life

Lon

g Le

arni

ng

PS

O -

1

PS

O -

2

PS

O –

3

CLR-3 : In what way cyber physical systems are crucial for the optimal performance of asynchronous model.

CLR-4 : Comprehend the cyber physical systems design and implementation in dynamical models.

CLR-5 : Hybridization of cyber physical systems which will help the students to anticipate upcoming technologies.

CLR-6 : Gain overall understand of the cyber physical systems for that will suit practical, engineering and industrial needs.


CLO-1 : Understand the basics of cyber physical systems. 1 90 75 H - - - - - - - - - - - - - -

CLO-2 : Design synchronous models for Real Time applications. 1 80 70 H - - - - - - - - - - - - - -

CLO-3 : Design Asynchronous models for Real Time applications. 2,3 90 75 - M H - H - - - - - - - - - -

CLO-4 : Develop Deep Understanding on selection of hardware and software’s for designing dynamical systems. 2,3 90 75 - M H - H - - - - - - - - - -

CLO-5 : Come up with cost effective, reliable, robust and feasible designs for real world problems. 2 80 75 - M H - L - - - - - - - - - -

CLO-6 : Design and implement cyber physical system and address the problems and limitations for real world problems. 2 90 75 - M H - H - - - H - - - M - L

DURATION (HOUR)

INTRODUCTION TO CYBER PHYSICAL SYSTEMS

SYNCHRONOUS MODEL ASYNCHRONOUS MODEL DYNAMICAL SYSTEM HYBRID SYSTEMS

S-1 SLO-1 Introduction To Cyber-Physical Systems Reactive Components Asynchronous Process Continuous Time Model Hybrid Dynamical Model

SLO-2 Cyber-Physical Systems Design Recommendations.

Variables, Valuations, And Expression States, Internal Actions Continuously Evolving Inputs And Outputs Hybrid Process, Process Composition

S-2 SLO-1 Cyber-Physical System Requirements Execution, Extended-State Machines Executions, Extended State Machines Continuously Evolving Inputs And Outputs Zeno Behavior

SLO-2 Requirements Engineering Properties Of Components Operation On Process Models With Disturbance Stability

S-3 SLO-1 Interoperability Finite State Components Asynchronous Design Primitives Composing Components Stability Designing Hybrid Systems

SLO-2 Real Time System Combinational Components Blocking Vs Non-Blocking Synchronization Composing Components Stability Automated Guided Vehicle

S-4 SLO-1 GPU Computing Event-Triggered Components Deadlocks Linear Systems Linearity Automated Guided Vehicle

SLO-2 Internet Of Things (IOT) Nondeterministic Components Deadlocks Linear Systems Linearity Obstacle Avoidance With Multi Robot Coordination

S-5

SLO-1 Internet Of Things (IOT) Input Enabled Components Shared Memory Solutions Of Linear Differential Equations Stability

Obstacle Avoidance With Multi Robot Coordination

SLO-2 Radio Frequency Identification Technology Task Graphs And Await Dependencies

Fairness Assumptions Solutions Of Linear Differential Equations Stability

Multi Hop Control Networks

S-6 SLO-1 Wireless Sensor Networks Technology Composing Components Asynchronous Coordination Protocols Designing Controllers Multi Hop Control Networks

SLO-2 Powerline Communication Block Diagrams Input / Output Variable Renaming

Asynchronous Coordination Protocols Open Loop Vs Feedback Controller Linear Hybrid Automata

S-7 SLO-1 Smart Cities And Internet Of Everything Parallel Composition Leader Election Stabilizing Controller Example Pursuit Game


SLO-2 Ubiquitous Computing Fundamentals Output Hiding Reliable Transmission Stabilizing Controller Example Pursuit Game

S-8 SLO-1 Core Properties Of Ubiquitous Computing Synchronous Designs Wait Fee Consensus PID Controllers Formal Model

SLO-2 Smart Devices: Components And Services Synchronous Circuits Safety Specifications Analysis Techniques Symbolic Reachability Analysis

S-9 SLO-1

Autonomous Systems In Ubiquitous Computing

Cruise Control Systems Invariants Of Transition Systems Numerical Solutions Timed Automata

SLO-2 CASE STUDY: Cyber Physical Vehicle Tracking System

Synchronous Networks Safety Monitors Barrier Certificates Model Of Timed Automata

Learning Resources

1. Rajeev Alur, Principles Of Cyber Physical Systems, 1st Edition, MITPress 2015. 2. Raj Rajkumar , “Cyber Physical Systems,” 2nd Edition, Elsevier 2015 3. Edward D Lamie, “Computing Fundamentals Of Cyber Physical Systems ” , 2nd Edition, Newnes Elsevier

Publication.

Learning Assessment

Bloom’s

Level of Thinking


CLA – 1 (10%) CLA – 2 (15%) CLA – 3 (15%) CLA – 4 (10%)#


Level 1 Remember

40 % - 30 % - 30 % - 30 % - 30% - Understand

Level 2 Apply

40 % - 40 % - 40 % - 40 % - 40% - Analyze

Level 3 Evaluate

20 % - 30 % - 30 % - 30 % - 30% - Create

Total 100 % 100 % 100 % 100 % 100 %


Course Designers


1. Mr. Athif Shah, Chairman, Abe Semicondutor, [email protected] 1. Dr. Meenakshi, Professor of ECE, CEG, Anna University, [email protected] 1. Dr. Vivek Maik, SRMIST

2. Dr. Madan Kumar Lakshmanan, Senior Scientist, CEERI, [email protected] 2. Dr. Venkatesan, Sr. Scientist, NIOT, Chennai, [email protected]


Course Code


EMBEDDED AND IMPLANTED DEVICES FOR CYBER PHYSICAL SYSTEM Course


L T P C

3 0 0 3



Courses NIL

Progressive Courses

NIL



CLR-1 : Understand the various embedded processors and memory architecture 1 2 3 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

CLR-2 : Identify suitable hardware and software available to develop a CPS

Leve

l of T

hink

ing

(Blo

om)

Exp

ecte

d P

rofic

ienc

y (%

)

Exp

ecte

d A

ttain

men

t (%

)

Eng

inee

ring

Kno

wle

dge

Pro

blem

Ana

lysi

s

Des

ign

& D

evel

opm

ent

Ana

lysi

s, D

esig

n, R

esea

rch

Mod

ern

Too

l Usa

ge

Soc

iety

& C

ultu

re

Env

ironm

ent &

Sus

tain

abili

ty

Eth

ics

Indi

vidu

al &

Tea

m W

ork

Com

mun

icat

ion

Pro

ject

Mgt

. & F

inan

ce

Life

Lon

g Le

arni

ng

PS

O -

1

PS

O -

2

PS

O –

3

CLR-3 : Study the multitasking and threading techniques for embedded processors

CLR-4 : Analyze the implementation scheme of implantable CPS for health care application

CLR-5 : Use Cyber physical systems for energy management

CLR-6 : Develop framework to put Human in CPS loop


CLO-1 : Identify suitable embedded processor and memory for cyber physical system applications 2,3 70 70 L M H - - - - - - - - - - - -

CLO-2 : Select optimal hardware and software for cyber physical system model 2,3 70 70 L M H - - - - - - - - - - - -

CLO-3 : Efficiently use the embedded processor resources 2,3 70 70 L M H - - - - - - - - - - - -

CLO-4 : Develop implantable CPS model for health care application. 2,3 70 70 L M H - - - - - - - - - - - -

CLO-5 : Develop implantable CPS model for various real world problems. 2,3 70 70 L M H - - - - - - - - - - - -

CLO-6 : Understand the realistic constraints to put concepts of Human in CPS loop in real time applications 3 90 80 - - H - M - - - M - - M H L -

Duration (hour)

EMBEDDED PROCESSORS INPUT AND OUTPUT HARDWARE AND

SOFTWARE MULTITASKING AND SCHEDULING

IMPLANTED CYBER-PHYSICAL SYSTEMS

HUMAN-IN-THE-LOOP CYBER-PHYSICAL SYSTEMS

S-1 SLO-1

Processors - Generalized Architecture Hardware - Pulse Width Modulation, Multitasking -Threads, Creating Threads,

Medical Cyber-Physical Systems - System Description And Operational Scenarios,

Theory Of HITLCPSS ,

SLO-2 Implementing Threads Virtual Medical Devices Data Acquisition

S-2 SLO-1 Processors – Speed General-Purpose Digital I/O Mutual Exclusion, Deadlock

Clinical Scenarios, Key Design Drivers And Quality Humans As Sets Of Sensors

SLO-2 Processors –Computational Power General-Purpose Digital I/O Memory Consistency Models Attributes, Trends

S-3 SLO-1 Microcontrollers - Architecture

Serial Interfaces The Problem With Threads Quality Attributes

Humans As Communication Nodes SLO-2 Microcontrollers Processes And Message Passing Challenges Of The MCPS Domain

S-4 SLO-1 DSP Processors- Architecture

Parallel Interfaces Scheduling - Basics Of Scheduling On-Demand Medical Devices State Inference, Human Nature

SLO-2 DSP Processors- Features Scheduling Decisions Assured Safety, Humans As Processing Nodes

S-5 SLO-1

Programmable Logic Controllers - Architecture Buses

Task Models, Smart Alarms And Clinical Decision Support Systems Humans And Robots As Actuators

SLO-2 Programmable Logic Controllers- Features Comparing Schedulers Closed-Loop System

S-6 SLO-1 Graphics Processors Architecture Software - Sequential Software In A

Concurrent World

Implementation Of A Scheduler Energy Cyber-Physical Systems - System Description Technologies For Supporting HITLCPS

SLO-2 Graphics Processors Architecture Rate Monotonic Scheduling Operational Scenarios

S-7 SLO-1 Parallelism, Pipelining, Interrupts Earliest Deadline First, Scheduling

Architecture HITL In Industry And At Home

SLO-2 Instruction-Level Parallelism Exceptions Mutual Exclusion HITL In Healthcare


S-8 SLO-1 Multicore Architectures Timers

Priority Inversion, Priority Inheritance Protocol Cyber Paradigm For Sustainable Sees

Social Networking

SLO-2 Multicore Architectures Atomicity Priority Ceiling Protocol Social Networking

S-9 SLO-1

Memory Architectures - Memory Technologies

Interrupt Controllers Multiprocessor Scheduling Practitioners’ Implications The Sample App’s Base Architecture

SLO-2 Memory Hierarchy, Memory Models Modeling Interrupts Scheduling Anomalies

Learning Resources

1. E. A. Lee And S. A. Seshia, Introduction To Embedded Systems - A Cyber-Physical Systems Approach, Second Edition, Mit Press, 2017.

2. Houbing Song Danda Rawat Sabina Jeschke Christian Brecher, Cyber-Physical Systems Foundations, Principles And Applications, , 1st Edition, Academic Press, 2016

3. Raj Rajkumar, Dionisio De Niz, Mark Klein, Cyber-Physical Systems, Pearson Education, Inc.2017,

4. David Nunes, Jorge Sá Silva, Fernando Boavida, A Practical Introduction To Human-In-The-Loop Cyber-Physical Systems, Johnwiley & Sons Ltd, 2018.

5. Raj Kamal, Internet Of Things, Mcgraw Hill Education; First Edition, 2017. 6. Edward Ashford Lee, Sanjit Arunkumar Seshia, Introduction To Embedded Systems - A Cyber Physical

Systems Approach - Second Edition, Lulu Enterprises Incorporated, 2014 7. Hamid R. Arabnia, Leonidas Deligiannidis, Fernando G. Tinetti, Embedded Systems, Cyber-Physical

Systems, And Applications, The 2017 Worldcomp International Conference Proceedings, Csrea, 2018

Learning Assessment

Bloom’s

Level of Thinking


CLA – 1 (10%) CLA – 2 (15%) CLA – 3 (15%) CLA – 4 (10%)#


Level 1 Remember

40 % - 30 % - 30 % - 30 % - 30% - Understand

Level 2 Apply

40 % - 40 % - 40 % - 40 % - 40% - Analyze

Level 3 Evaluate

20 % - 30 % - 30 % - 30 % - 30% - Create

Total 100 % 100 % 100 % 100 % 100 %


Course Designers


Dr. Vinay Kumar Gupta, National Physical Laboratory, [email protected] Prof .C. Vijayan, IITM, Chennai, [email protected] Dr. P. Eswaran, SRMIST

Prof. S. Balakumar, Univ of Madras, [email protected] Mr. A V M Manikandan, SRMIST


Course Code


SENSORS AND ACTUATORS FOR CYBER PHYSICAL SYSTEM Course


L T P C

3 0 0 3



Courses NIL

Progressive Courses

NIL



CLR-1 : Learn sensor basic working 1 2 3 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

CLR-2 : Understand sensor design for embedded applications

Leve

l of T

hink

ing

(Blo

om)

Exp

ecte

d P

rofic

ienc

y (%

)

Exp

ecte

d A

ttain

men

t (%

)

Eng

inee

ring

Kno

wle

dge

Pro

blem

Ana

lysi

s

Des

ign

& D

evel

opm

ent

Ana

lysi

s, D

esig

n, R

esea

rch

Mod

ern

Too

l Usa

ge

Soc

iety

& C

ultu

re

Env

ironm

ent &

Sus

tain

abili

ty

Eth

ics

Indi

vidu

al &

Tea

m W

ork

Com

mun

icat

ion

Pro

ject

Mgt

. & F

inan

ce

Life

Lon

g Le

arni

ng

PS

O -

1

PS

O -

2

PS

O –

3

CLR-3 : Design optimal real time models and learn the uncertainties

CLR-4 : Understand the Interface of Sensor System Design And Implementation

CLR-5 : Develop Deep Understanding On Sensor Materials and Technologies

CLR-6 : Understand about industry grade sensors and applications


CLO-1 : Understand the working, classification and design of systems with sensors 1 60 70 - H - - L - - - - - - - - -

CLO-2 : Design multi sensor cyber physical system for real world applications 2 60 70 M - - - - - - - - - M - - -

CLO-3 : Implement different practical real time systems with minimal supervision 3 60 70 - M H - H - - - - - - - - L

CLO-4 : Develop Deep Understanding on selection of hardware and software’s for designing systems 1 60 70 - M - - - - - - - - H - - -

CLO-5 : Come up with cost effective, reliable, robust and feasible designs for real world problems 3 60 70 - M M - H - - - - H - - - H

CLO-6 : Design and implement real time systems and address the problems and limitations 3 60 70 - - M - H - - - - - H L - M

DURATION (HOUR)

SENSOR BASIC BLOCKS OPTICAL COMPONENTS OF SENSOR HUMAN DETECTORS CHEMICAL AND BIOLOGICAL

SENSORS MATERIALS AND TECHNOLOGIES

S-1 SLO-1 Data Acquisition Energy Of Light Quanta Ultrasonic Detectors Chemical Sensors Silicon As Sensing Material

SLO-2 Sensors, Signals, And Systems Light Polarization Microwave Motion Detectors Bio Chemical Sensors Plastics

S-2 SLO-1 Sensor Classification Light Scattering Microwave Motion Detectors Chemical Sensor Characteristics Metals, Ceramics

SLO-2 Units Of Measurements Geometrical Optics Ground Penetrating Radars Selectivity And Sensitivity Simple And Fraden Model Ceramics

S-3 SLO-1 Transfer Functions Radiometry Linear Optical Sensors Electrical And Electrochemical Sensors Steinhart And Hart Model Ceramics

SLO-2 Mathematical Models, Functional Approximations

Photometry Capacitive Occupancy Detectors Electrode Systems Structured Glass, Optical Glass

S-4 SLO-1

Linear Regression, Polynomial Approximations

Windows Triboelectric Detectors Potentiometric Sensors Nano Materials

SLO-2 Sensitivity, Piecewise Linear Approximation

Mirrors Coated And Prismatic Optoelectronic Motion Detectors - Structure

Conductometric Sensors Surface Processing, Spin Casting

S-5

SLO-1 Spline Interpolation, Lenses – Curved Surface Lenses Optoelectronic Motion Detectors - Distortion

Metal Oxide Semiconductor (MOS) Chemical Sensors

Vacuum Deposition

SLO-2 Multidimensional Transfer Functions Lenses – Fresnel Lenses Optoelectronic Motion Detectors - Efficiency

Elastomer Chemiresistors Sputtering

S-6 SLO-1 Calibration, Lenses – Flat Nano Lenses Optical Presence Sensors Chemicapacitive Sensors, Chem FET Chemical Vapor Deposition (CVD)

SLO-2 Computation Of Parameters Fiber Optics And Waveguides Pressure-Gradient Sensors Photoionization Detectors Electroplating

S-7 SLO-1 Computation Of A Stimulus Optical Efficiency Gesture Sensing (3-D Pointing) Physical Transducers, Acoustic Wave Devices

MEMS Technologies


SLO-2 Use Of A Analytical Equation Lensing Effect Gesture Sensing (3-D Pointing) Micro Cantilevers, Spectrometers Photolithography

S-8 SLO-1 Use Of Linear Piecewise Approximation Concentrators Tactile Sensors

Optical Transducers And Radiometric Selectivity

Silicon Micromachining

SLO-2 Iterative Computation Of Stimulus Coatings For Thermal Absorption Tactile Sensors Color Change Sensors Micromachining Of Bridges And Cantilevers

S-9

SLO-1 CASE STUDY: Sensors For Mobile Communication Devices - Requirements

Anti Reflective Coating CASE STUDY: Ionizing Radiation Detectors

Multi Sensor Arrays Lift Off, Wafer Bonding

SLO-2 CASE STUDY: Sensors For Mobile Communication Devices - Integration

CASE STUDY: Energy Harvesting CASE STUDY: Ionizing Radiation Detectors

Electronics Noses And Tongues LIGA In Wafer Bonding

Learning Resources

1. Phillip A. Laplante , “Handbook Of Modern Sensors – Physics Design And Applications” , 5th Edition, Springer Publication, 2015.

2. Xiaocong Fan, “Real-Time Embedded Systems,” 2nd Edition, Elsevier 2015.

Learning Assessment

Bloom’s

Level of Thinking


CLA – 1 (10%) CLA – 2 (15%) CLA – 3 (15%) CLA – 4 (10%)#


Level 1 Remember

40 % - 30 % - 30 % - 30 % - 30% - Understand

Level 2 Apply

40 % - 40 % - 40 % - 40 % - 40% - Analyze

Level 3 Evaluate

20 % - 30 % - 30 % - 30 % - 30% - Create

Total 100 % 100 % 100 % 100 % 100 %


Course Designers


1. Mr. Athif Shah, Chairman, Abe Semicondutor, [email protected] 1. Dr. Meenakshi, Professor of ECE, CEG, Anna University, [email protected] 1. Dr. Soumya Ranjan Routray, SRMIST

2. Dr. Madan Kumar Lakshmanan, Senior Scientist, CEERI, [email protected] 2. Dr. Venkatesan, Sr. Scientist, NIOT, Chennai, [email protected] 2. Dr. Krishnaveni, SRMIST


Course Code


UNSUPERVISED INTELLIGENCE IN CYBER PHYSICAL SYSTEM Course


L T P C

3 0 0 3



Courses NIL

Progressive Courses

NIL



CLR-1 : Learning of unsupervised intelligence algorithms in cyber physical system 1 2 3 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

CLR-2 : Understand the working of model based reinforcement learning

Leve

l of T

hink

ing

(Blo

om)

Exp

ecte

d P

rofic

ienc

y (%

)

Exp

ecte

d A

ttain

men

t (%

)

Eng

inee

ring

Kno

wle

dge

Pro

blem

Ana

lysi

s

Des

ign

& D

evel

opm

ent

Ana

lysi

s, D

esig

n, R

esea

rch

Mod

ern

Too

l Usa

ge

Soc

iety

& C

ultu

re

Env

ironm

ent &

Sus

tain

abili

ty

Eth

ics

Indi

vidu

al &

Tea

m W

ork

Com

mun

icat

ion

Pro

ject

Mgt

. & F

inan

ce

Life

Lon

g Le

arni

ng

PS

O -

1

PS

O -

2

PS

O –

3

CLR-3 : Learn with case study about reinforcement learning

CLR-4 : Use of python programming for reinforcement learning

CLR-5 : Unsupervised learning using SCIKIT learner, tensor flow and KERAS

CLR-6 : Gain overall understand of the cyber intelligent systems for real world applications


CLO-1 : Ability to understand reinforcement learning and its use for intelligence 1 80 70 H - - - - - - - - - - - - - -

CLO-2 : Able to design intelligent systems using cyber security standards 1 75 70 - M - - - - - - - - - - - -

CLO-3 : Implement different practical self learning systems with minimal supervision 3 75 70 - M H - - - - - - - - - - - H

CLO-4 : Develop deep reinforcement learning for designing cyber physical system 3 75 70 - H - - - - - - - - - - - H

CLO-5 : Come up with cost effective, reliable, robust and feasible designs for real world problems 1 70 70 - M - - - - - - - - - - - - -

CLO-6 : Design and implement real time systems and address the problems and limitations 2 70 70 - M - - - - - - - - - - M - -

DURATION (HOUR) REINFORCEMENT LEARNING AND CPS

MODEL BASED REINFORCEMENT LEARNING

DEEP REINFORCEMENT LEARNING & CASE STUDY

PYTHON PROGRAMMING FOR REINFORCEMENT LEARNING

UNSUPERVISED LEARNING USING SCIKIT-LEARNER, TENSORFLOW AND

KERAS

S-1 SLO-1 Overview Of Reinforcement Learning

Model Based Reinforcement Learning Introduction

Deep Reinforcement Learning Introduction Introduction To Reinforcement Learning Using Python

Unsupervised Learning Using Scikit-Learn

SLO-2 Comparison Of Different Reinforcement Learning Methods

Model Free Reinforcement Learning Deep Reinforcement Learning Examples Introduction To Reinforcement Learning Using Python

Dimensionality Reduction

S-2 SLO-1

Examples Of Different Reinforcement Learning Methods

Model Based Reinforcement Learning Principles,

Deep Reinforcement Learning Working Principles

Introduction To Reinforcement Learning Libraries Used

The Motivation For Dimensionality Reduction

SLO-2 Applications Of Different Reinforcement Learning Methods

Working &Applications Deep Reinforcement Learning Mathematical Modeling

Introduction To Reinforcement Learning Set Up Of Tools

Dimensionality Reduction Algorithms

S-3 SLO-1 History Of Reinforcement Learning Dynamic Programming

Deep Reinforcement Learning Value Function

Elements Of Reinforcement Learning Principal Component Analysis

SLO-2 History Of Reinforcement Learning Dynamic Programming Principles & Applications

Deep Reinforcement Learning Value Function Tools

Agent Environment Interface Singular Value Decomposition

S-4 SLO-1

Simulation Tool Kits For Reinforcement Learning

Partially Observable Markov Decision Process

Deep Reinforcement Learning Value Policy Tools

Types Of Reinforcement Environment Dictionary Learning

SLO-2 Simulation Tool Kit For Reinforcement Learning

Partially Observable Markov Decision Process - Architecture

Reinforcement Learning For Cyber Security Reinforcement Environment Platforms Independent Component Analysis

S-5

SLO-1 Overview Of Cyber Physical System Partially Observable Markov Decision Process – Working & Applications

Reinforcement Learning For Cyber Security – Examples

Reinforcement Environment Platform Call Function

Unsupervised Learning Using Tensor Flow

SLO-2 Examples Of Cyber Physical Systems Continuous Observable Markov Decision Process – Working & Applications

Reinforcement Learning For Cyber Security – Architectures

Getting Started With OPENAI And TENSORFLOW

Keras- Auto Encoders


S-6 SLO-1 Cyber Security-Introduction

Continuous Observable Markov Decision Process – Working & Applications

Reinforcement Learning For Cyber Security – Architectures

Setting Up Your Machine For OPEN AI And TENSOR FLOW

Auto Encoder: The Encoder And The Decoder

SLO-2 Cyber Security Examples Continuous Observable Markov Decision Process – Working & Applications

Reinforcement Learning For Cyber Security – System Function

OPENAI Gym, OPENAI Universe Under Complete Auto Encoders

S-7 SLO-1 Cyber Security Standards

Reinforcement Learning Predication Analysis

CASE STUDY: Online Cyber Attack Detection In Smart Grid –Introduction

TENSORFLOW Over Complete Auto Encoders

SLO-2 Reinforcement Learning Problems Reinforcement Learning Predication Analysis

CASE STUDY: Online Cyber Attack Detection In Smart Grid –Application

The Markov Chain And Markov Process Dense Vs. Sparse Autoencoders

S-8 SLO-1 Multi Armed Bandit Problem Reinforcement Learning Control Methods

CASE STUDY: Online Cyber Attack Detection In Smart Grid –System Design

Markov Decision Process Denoising Autoencoder

SLO-2 Contextual Bandit Problem Reinforcement Learning Advanced Algorithm

CASE STUDY: Online Cyber Attack Detection In Smart Grid –Working Principle

The Bellman Equation Variational Autoencoder

S-9

SLO-1 Contextual Bandit Problem Reinforcement Learning Advanced Algorithm Examples

CASE STUDY: Online Cyber Attack Detection In Smart Grid –System Model

Optimality, Solving The Bellman Equation

Hands-On With Autoencoder

SLO-2 Reinforce Learning Problem Reinforcement Learning Advanced Algorithm Applications

CASE STUDY: Online Cyber Attack Detection In Smart Grid –State Estimation

Optimality, Solving The Bellman Equation

Hands-On With Autoencoder

Learning Resources

1 Chong Li, Meikang Qiu, Reinforcement Learning for Cyber-Physical Systems and Cybersecurity Case Studies, 1st Edition, CRC Press.

2. Sudharsan Ravichandiran, Hands-On Reinforcement Learning with Python, 2nd Edition, Packet Publishing, 2018.

3. Ankur A. Patel, Hands-On Unsupervised Learning Using Python, 1st Edition, O'Reilly Media, Inc., March 2019

Learning Assessment

Bloom’s

Level of Thinking


CLA – 1 (10%) CLA – 2 (15%) CLA – 3 (15%) CLA – 4 (10%)#


Level 1 Remember

40 % - 30 % - 30 % - 30 % - 30% - Understand

Level 2 Apply

40 % - 40 % - 40 % - 40 % - 40% - Analyze

Level 3 Evaluate

20 % - 30 % - 30 % - 30 % - 30% - Create

Total 100 % 100 % 100 % 100 % 100 %


Course Designers


1. Mr. Athif Shah, Chairman, Abe Semicondutor, [email protected] 1. Dr. Meenakshi, Professor of ECE, CEG, Anna University, [email protected] 1. Dr. P. Vijaya Kumar, SRMIST



Course Code


REAL TIME CYBER PHYSICAL SYSTEM Course


L T P C

3 0 0 3



Courses NIL

Progressive Courses

NIL



CLR-1 : Practical knowledge on cyber physical machines 1 2 3 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

CLR-2 : Understanding of process, model and compositions of cyber physical systems

Leve

l of T

hink

ing

(Blo

om)

Exp

ecte

d P

rofic

ienc

y (%

)

Exp

ecte

d A

ttain

men

t (%

)

Eng

inee

ring

Kno

wle

dge

Pro

blem

Ana

lysi

s

Des

ign

& D

evel

opm

ent

Ana

lysi

s, D

esig

n, R

esea

rch

Mod

ern

Too

l Usa

ge

Soc

iety

& C

ultu

re

Env

ironm

ent &

Sus

tain

abili

ty

Eth

ics

Indi

vidu

al &

Tea

m W

ork

Com

mun

icat

ion

Pro

ject

Mgt

. & F

inan

ce

Life

Lon

g Le

arni

ng

PS

O -

1

PS

O -

2

PS

O –

3

CLR-3 : Identify the significance of networking and design components of cyber physical systems

CLR-4 : Create insights to the temporal logic and asynchronous model

CLR-5 : Analyze the working principle of continuous model and predictive model

CLR-6 : Utilize the concepts in cyber physical systems for the understanding of engineering and technology


CLO-1 : Use cyber physical system for engineering applications 1 60 65 - - - - - - H - - - - M - - -

CLO-2 : Design specific parts of the engineering schemes with cyber physical model 1 60 65 - - M - - - L - - - - - - - H

CLO-3 : Solve simple engineering problems with cyber physical solutions 2 65 65 - - H - - L M - - - - - - - -

CLO-4 : Apply the CPS model to replace older existing technology models 1 60 65 - - - - - - M - - - - - - - H

CLO-5 : Use Cyber physical systems for further new application and developments 1 60 65 - - M - - - - - - - - - - - H

CLO-6 : Apply the concepts of cyber physical systems in real time applications 2 60 65 - - - - L - - - - - - M - - H

Duration (hour)

INTRODUCTION TO REAL TIME SYSTEMS

SOFTWARE ARCHITECTURES FOR REAL-TIME SYSTEMS, REAL-TIME

SCHEDULING AND SHARING

CPS ARCHITECTURAL DESIGN, DATA MANAGEMENT AND ROUTING WITH WSN

TECHNOLOGIES

COMPUTING FUNDAMENTALS IN CYBER-

PHYSICAL SYSTEMS

REAL TIME CPS APPLICATIONS AND CASE STUDIES

S-1 SLO-1 Overview Of Embedded Systems Real-Time Tasks Wireless Sensor Networks Ubiquitous Computing History To Date

Cyber-Physical Systems Applications: Communication

SLO-2 Examples Of Embedded Systems Real-Time Tasks Distinguishing WSN, MANET, M2M, And CPS Ubiquitous Computing Fundamentals Consumer Interaction, Energy

S-2 SLO-1 Soft Real-Time Systems Round-Robin Architecture Cyber-Physical System Design Challenges Ubiquitous Computing Fundamentals Infrastructure, Health Care

SLO-2 Hard Real-Time Systems Round-Robin Architecture Cyber-Physical System Design Challenges Smart Devices: Components And Services

Manufacturing,

S-3 SLO-1 Spectrum Of Real-Time Systems Round Robin With Interrupts Cyber-Physical Systems Architecture Tagging, Sensing, And Controlling Military

SLO-2 Examples Of Real Time Systems Queue-Based Architecture Cyber-Physical Systems Architecture Autonomous Systems In Ubiquitous Computing

Robotics, Transportation

S-4 SLO-1 Case Study: Real Time Systems

Real-Time Scheduling: Clock-Driven Approach

The Role Of Wsn Technologies In Cpss Autonomous Systems In Ubiquitous Computing

Smart Cities And The Internet Of Everything

SLO-2 Introduction To Cross-Platform Development

Real-Time Scheduling: Clock-Driven Approach

The Role Of WSN Technologies In Cpss Case Study: Robot Manipulator Medical Cyber-Physical Systems: Introduction

S-5

SLO-1 Hardware Architecture Real-Time Scheduling: Rate-Monotonic Approach

Towards A New Cps Architecture Introduction To Systems Engineering Background And Related Works

SLO-2 Software Development: Software Design Real-Time Scheduling: Rate-Monotonic Approach

Data Management: Wsn Vs. Wsn-Cps Introduction To Systems Engineering Technical Components


S-6 SLO-1 System Programming Language C/C++ Real-Time Scheduling: Sporadic Server Data Management Activities Introduction To Software Engineering

Towards Cognitive Prostheses, Challenges And Opportunities

SLO-2 System Programming Language C/C++ Real-Time Scheduling: Sporadic Server Data Management Activities Introduction To Software Engineering Mobile Wsn-Cps Applications

S-7 SLO-1 Build Target Images Resource Sharing: Shared Variables

Cyber-Physical Cloud Computing: Opportunities And Challenges

V-Model Smart Space Systems

SLO-2 Build Target Images Shared Memory Cyber-Physical Cloud Computing: Opportunities And Challenges

Agile Software Development Methodology

Emergency Response Systems

S-8 SLO-1 CASE STUDY: Building A QNX Image Semaphore

Design Challenges And Issues For Routing In WSN Within The Context Of CPS

Comparison Of The V-Model And The Agile Software Development Methodology

Human Activity Inference

SLO-2 Transfer Executable File Object To Target Semaphore Routing Protocols In Wsns For Cpss Requirements In Software Design In Cyber-Physical Systems

Smart Factory

S-9 SLO-1 Integrated Testing On Target Mutex

Future Directions Of Routing Protocols In WSN For CPS

Requirements In Software Design In Cyber-Physical Systems

CASE STUDY: Cyber-Physical Vehicle Tracking System

SLO-2 System Production Condition Variable Case Study: Wsn-Cps Applications Maritime Area Case Studies Case Study: Cyber-Physical Vehicle Tracking System

Learning Resources

1. Kuodi Jain-Real Time Sysytems , 1st edition, Intech Open Publshing, 2015. 2. Xiaocong Fan- Real-Time Embedded Systems Design Principles and Engineering Practices,

1st Edition, Newnes Publications, 2016

3. Sherali Zeadally and Nafaaˆ Jabeur- Cyber-Physical System Design with Sensor Networking Technologies, 1st Edition, IEEE Design & Test, 2017.

4. Dietmar P.F. Moller- Guide to Computing Fundamentals in Cyber-Physical Systems, 2nd edition, Springer Publications, 2016.

Learning Assessment

Bloom’s

Level of Thinking


CLA – 1 (10%) CLA – 2 (15%) CLA – 3 (15%) CLA – 4 (10%)#


Level 1 Remember

40 % - 30 % - 30 % - 30 % - 30% - Understand

Level 2 Apply

40 % - 40 % - 40 % - 40 % - 40% - Analyze

Level 3 Evaluate

20 % - 30 % - 30 % - 30 % - 30% - Create

Total 100 % 100 % 100 % 100 % 100 %


Course Designers


1. Mr. Athif Shah, Chairman, Abe Semicondutor, [email protected] 1. Dr. Meenakshi, Professor of ECE, CEG, Anna University, [email protected] 1. Dr Phani Kumar, SRMIST



Course Code


CYBER PHYSICAL INTERFACE AND AUTOMATION Course


L T P C

3 0 0 3


18ECE251T Co-requisite

Courses NIL

Progressive Courses

NIL

Course Offering Department ECE Data Book / Codes/Standards NIL


CLR-1 : Study the cyber physical systems built-on Wireless sensor networks 1 2 3 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

CLR-2 : Learn the synthesis for cyber physical systems

Leve

l of T

hink

ing

(Blo

om)

Exp

ecte

d P

rofic

ienc

y (%

)

Exp

ecte

d A

ttain

men

t (%

)

Eng

inee

ring

Kno

wle

dge

Pro

blem

Ana

lysi

s

Des

ign

& D

evel

opm

ent

Ana

lysi

s, D

esig

n, R

esea

rch

Mod

ern

Too

l Usa

ge

Soc

iety

& C

ultu

re

Env

ironm

ent &

Sus

tain

abili

ty

Eth

ics

Indi

vidu

al &

Tea

m W

ork

Com

mun

icat

ion

Pro

ject

Mgt

. & F

inan

ce

Life

Lon

g Le

arni

ng

PS

O -

1

PS

O -

2

PS

O –

3

CLR-3 : Gain knowledge on security features of cyber physical systems

CLR-4 : Analyse the real-time scheduling for cyber physical systems

CLR-5 : Enhance the scientific computing skills on medical cyber physical systems

CLR-6 : Develop Cyber physical systems for interfacing and automation


CLO-1 : Appreciate the features of localization of wireless sensor networks using CPS 3 80 70 L H - H L - - - L L - H - - -

CLO-2 : Synthesize the feedback control systems for CPS 3 85 75 M H L M L - - - M L - H - - -

CLO-3 : Analyse security issues in CPS 3 75 70 M H M H L - - - M L - H - - -

CLO-4 : Design the real time scheduling algorithms for CPS 3 85 80 M H M H L - - - M L - H - - -

CLO-5 : Apply the automated concepts in medical CPS. 3 85 75 H H M H L - - - M L - H - - -

CLO-6 : Implement basic applications with automation 3 80 70 L H - H L - - - L L - H - - -

Duration (hour) CYBER-PHYSICAL SYSTEMS BUILT ON

WIRELESS SENSOR NETWORKS SYNTHESIS FOR

CYBER-PHYSICAL SYSTEMS SECURITY OF CYBER-PHYSICAL

SYSTEMS REAL-TIME SCHEDULING FOR CYBER-

PHYSICAL SYSTEMS MEDICAL CYBER-PHYSICAL SYSTEMS

S-1 SLO-1 Introduction And Motivation

Introduction Introduction Introduction Introduction

SLO-2 Medium Access Control Virtual Medical Devices

S-2 SLO-1

System Description And Operational Scenarios

Basic Techniques Basic Techniques Basic Techniques System Description And Operational Scenarios

SLO-2 Routing Preliminaries Discrete Verification Scheduling With Fixed Timing Parameters Clinical Scenarios

S-3 SLO-1 Node Localization Problem Definition Cyber Security Requirements Memory Effects Key Design Drivers And Quality Attributes

SLO-2 Clock Synchronization Trends

S-4 SLO-1

Power Management Solving The Synthesis Problem

Attack Model Advanced Techniques

Quality Attributes And Challenges Of The MCPS Domain

SLO-2 Construction Of Symbolic Models Smart Alarms And Clinical Decision Support Systems Trends

S-5 SLO-1 Key Design Drivers And Quality Attributes Controller Timing

Countermeasures Multiprocessor/Multicore Scheduling High-Confidence Development Of MCPS

SLO-2 Physically Aware Control Design For Resource Efficiency Closed-Loop System

S-6 SLO-1 Real-Time Aware Advanced Techniques Advanced Techniques

Accommodating Variability And Uncertainty

On-Demand Medical Devices And Assured Safety

SLO-2 Runtime Validation Aware Construction Of Symbolic Models Real-Time Verification Assurance Cases

S-7 SLO-1 Security Aware Continuous-Time Controllers Hybrid Verification Managing Other Resources Practitioners’ Implications


SLO-2 Software Tools MCPS Developer Perspective

S-8 SLO-1

Practitioners’ Implications Reducing The Computation Time

System Theoretic Approaches Rhythmic Tasks Scheduling MCPS Administrator Perspective

SLO-2 Analysis And Simulation Of Feedback Control Systems

MCPS User Perspective

S-9 SLO-1

Summary And Open Challenges Summary And Open Challenges Summary And Open Challenges Summary And Open Challenges Summary And Open Challenges SLO-2

Learning Resources

1. Rajeev Alur, Principles of Cyber Physical Systems, 1st Edition, MIT Press 2015. 2. Raj Rajkumar , “Cyber Physical Systems,” 2nd Edition, Elsevier 2015 3. Edward D Lamie, “Computing Fundamentals Of Cyber Physical Systems ” , 2nd Edition, Newnes Elsevier

Publication.

Learning Assessment

Bloom’s

Level of Thinking


CLA – 1 (10%) CLA – 2 (15%) CLA – 3 (15%) CLA – 4 (10%)#


Level 1 Remember

40 % - 30 % - 30 % - 30 % - 30% - Understand

Level 2 Apply

40 % - 40 % - 40 % - 40 % - 40% - Analyze

Level 3 Evaluate

20 % - 30 % - 30 % - 30 % - 30% - Create

Total 100 % 100 % 100 % 100 % 100 %


Course Designers


1. Mr. Athif Shah, Chairman, Abe Semicondutor, [email protected] 1. Dr. Meenakshi, Professor of ECE, CEG, Anna University, [email protected] 1. Dr. Sangeetha M, SRMIST



Course Code


HIGH PERFORMANCE COMPUTING FOR CYBER PHYSICAL SYSTEM Course


L T P C

3 0 0 3



Courses NIL

Progressive Courses

NIL



CLR-1 : Understanding the role of supercomputers 1 2 3 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

CLR-2 : Implementing the HPC Applications on Grid and cloud Infrastructures

Leve

l of T

hink

ing

(Blo

om)

Exp

ecte

d P

rofic

ienc

y (%

)

Exp

ecte

d A

ttain

men

t (%

)

Eng

inee

ring

Kno

wle

dge

Pro

blem

Ana

lysi

s

Des

ign

& D

evel

opm

ent

Ana

lysi

s, D

esig

n,

Res

earc

h M

oder

n T

ool U

sage

Soc

iety

& C

ultu

re

Env

ironm

ent &

S

usta

inab

ility

E

thic

s

Indi

vidu

al &

Tea

m W

ork

Com

mun

icat

ion

Pro

ject

Mgt

. & F

inan

ce

Life

Lon

g Le

arni

ng

PS

O -

1

PS

O -

2

PS

O –

3

CLR-3 : JGRIM Simplifies the process of porting applications

CLR-4 : Learning on Scheduled Algorithm

CLR-5 : Real – world Infrastructures-Research area

CLR-6 : Big Data challenge and Applications in cloud environment customization design


CLO-1 : Improve products reduce the time taken for develop new products-HPC 1 90 75 H - - - - - - - - - - - - - -

CLO-2 : Reduce the production cost 1 80 70 H - - - - - - - - - - - - - -

CLO-3 : High performance computing systems can be highly useful to analyze the data 2,3 90 75 - M H - H - - - - - - - - - -

CLO-4 : Big data as our ability to gather the information 2,3 90 75 - M H - H - - - - - - - - - -

CLO-5 : Ability to learn the Algorithm 2 80 75 - M H - L - - - - - - - - - -

CLO-6 : HPC main advantage learning here( Processing speed super computer) 2 90 75 - M H - H - - - H - - - M - L

Duration (hour)

INTRODUCTION TO SUPER COMPUTERS

SCHEDULING ARCHITECTURES PRIVACY & SECURITY FRAMEWORK DATA EXECUTION MODELS EMERGING

APPLICATIONS

S-1

SLO-1 Introduction Of Super Computers And Grids

Introduction To Scheduling- Moldable Job Allocation For Handling Resource Fragmentation In Computational Grid

Introduction To Security Big Data Architectures Introduction To Emerging Big Data Application

SLO-2 Grids And Supercomputers, Grids Do Support Supercomputing

Computational Grid Model And Experimental Setting

A Policy Based Security Framework For Privacy-Enhancing Data Access And Usage Control In Grids

Dataflow Model For Cloud Computing Frameworks In Big Data

Matrix Factorization For Drug Target Interaction Prediction

S-2 SLO-1 Grids Cannot Replace Supercomputers

Moldable Job Allocation On Homogeneous Parallel Computer ,Moldable Job Allocation In Heterogeneous Grid

Privacy Management In Large Scale Distributed Systems, Managing Initial Data Access,

Introduction Classification Based Methods

SLO-2 The Role Of Supercomputers In Grids Comparison With Multi-Site Co-Allocation And Conclusion

Controlling Data Usage, Grids And Their Requirements For Privacy Management

Cloud Computing Frameworks Neighborhood Regularization Logistic Matrix-Problem Formalization

S-3

SLO-1 A Public-Private Supercomputing Grid Partnership Prerequisites And Problems

Introduction To Speculative Scheduling Of Parameter Sweep Applications Using Job Behavior Descriptions

Architecture Of A Policy Based Security Framework For Privacy-Enhancing Data Access And Usage Control In Grids, Application Of The Security Framework To A Xacml-Based Privacy Management Architecture

Batch, Iterative, Incremental Processing Frameworks

Logistic Matrix Factorization, Neighborhood Regularization

SLO-2 Mode Of Operation Architecture Overview Integration Of The Security Framework’s Privacy Management Components On The Service Provider Side, Summery

Streaming Processing Frameworks, General Dataflow Frameworks

Combined Model,Neighbourhood Smoothing

S-4 SLO-1 The Public-Private Grid, Discussion Of Results, Conclusion

Job Behavior Description, Simple Description

Adaptive Control Of Redundant Task Execution For Dependable Volunteer Computing-Instruction

Application Examples Experimental Settings, Comparison, Benefits


SLO-2 Introduction To Porting Hpc Applications To Grids And Clouds -Applications And The Grid Infrastructure

Complex Description Related Work, Statistical Resource Availability Characterizing, Root Cause Analysis Of Failures

Controllable Data Execution Model Parameter Sensitive Analysis

S 5-6

SLO-1

Applications And Resource Management Generating Simple Job Descriptions, Generating Complex Job Descriptions

Fitting Distribution to Empirical Availability Data, Availability Prediction, A Heuristics-Based Failure Probability Estimation, Life Cycle Of A Volunteer Peer

Design Of A Processor Core Customized For Stencil Computation-Introduction

Predicting Novel Interactions SLO-2

S-7

SLO-1 Applications And Data Management Complex Descriptions With Mutation, Scheduling Strategies

Failure Probability Estimation, Least Failure Probability Dispatch Policy

Related Work-Customizable Design And Processors, Micro Architecture, Stencil Computation

Overview Of Neural Network Accelerators

SLO-2 The Simple API For Grid Applications (Saga)

Static Data Feeder Strategy, Dynamic Data Feeder Strategy

An Enhanced Workflow Management Mechanism, The Task Selection

Customization Design, Flow, Array Padding And Loop Tiling, BW Optimizations.

Architectures Of Hardware Accelerators –ASIC, GPU

S-8 SLO-1

Grid Applications And Data, Shared Data Access

Implementation, Scheduler Evaluation Results, Baseline Policies SIMD, DMA Stencil Computation and others

FPGA, Modern Storage Accelerator

SLO-2 Data Topology, Data Volume Description Generator, Description Repository Service

Time Dependent Schrödinger’s Wave Equation, Performance Evaluation

Implementation Parallel Programming Models

S-9

SLO-1 Porting And Programming Grid Applications

Simulation Results Comparison With The Simple Redundant Task Dispatch Policy, Comparison With The Greedy Dispatch

Test Results Middleware Of Neural Networks

SLO-2 Grid Programming Models And Environments

Summary And Conclusion Effects Of Window Size On The Process Time, Improvement Of The Performance By Identifying Worker Types

Introduction To Electro Migration Alleviation Techniques

Latest Developments

Learning Resources

1. Emmanuel Udoh, Cloud ,grid and High performance computing Emerging Applications, 1st Edition, IGI Global, 2011.

2. Chao Wang, High performance computing for Big Data Methodologies and Applications, 1st Edition, Chapman & Hall Press Publications, 2020.

Learning Assessment

Bloom’s

Level of Thinking


CLA – 1 (10%) CLA – 2 (15%) CLA – 3 (15%) CLA – 4 (10%)#


Level 1 Remember

40 % - 30 % - 30 % - 30 % - 30% - Understand

Level 2 Apply

40 % - 40 % - 40 % - 40 % - 40% - Analyze

Level 3 Evaluate

20 % - 30 % - 30 % - 30 % - 30% - Create

Total 100 % 100 % 100 % 100 % 100 %


Course Designers


1. Mr. Athif Shah, Chairman, Abe Semicondutor, [email protected] 1. Dr. Meenakshi, Professor of ECE, CEG, Anna University, [email protected] 1. Dr. C.T.Manimegalai, SRMIST



Course Code


CYBER PHYSICAL CONTROL SYSTEM Course


L T P C

3 0 0 3


18ECS201T, 18ECE252T Co-requisite

Courses NIL

Progressive Courses

NIL



CLR-1 : Understand the basics and advanced concepts of control systems 1 2 3 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

CLR-2 : Gain the knowledge of industrial controllers process and their instrumentation

Leve

l of T

hink

ing

(Blo

om)

Exp

ecte

d P

rofic

ienc

y (%

)

Exp

ecte

d A

ttain

men

t (%

)

Eng

inee

ring

Kno

wle

dge

Pro

blem

Ana

lysi

s

Des

ign

& D

evel

opm

ent

Ana

lysi

s, D

esig

n, R

esea

rch

Mod

ern

Too

l Usa

ge

Soc

iety

& C

ultu

re

Env

ironm

ent &

Sus

tain

abili

ty

Eth

ics

Indi

vidu

al &

Tea

m W

ork

Com

mun

icat

ion

Pro

ject

Mgt

. & F

inan

ce

Life

Lon

g Le

arni

ng

PS

O -

1

PS

O -

2

PS

O –

3

CLR-3 : Comprehend basic symbology and process control elements and techniques

CLR-4 : be acquainted with Industrial standards and methods for calibration and controller tuning

CLR-5 : Acquire knowledge on Control systems networking and cyber connections

CLR-6 : Grasp significant knowledge on industrial control systems and networking standards


CLO-1 : Understand mathematical (state) equations of complex control systems and their stability 2 60 60 H M - - - - - - - - - - - - -

CLO-2 : Design optimal control process for industrial instrumentation 2 60 60 - M H - - - - - - - - - - - -

CLO-3 : Understand process control instrumentation and design various control flow diagrams 1 60 60 - M H - - - - - - - - - - - -

CLO-4 : Maintain Industrial standards and methods for calibration of industrial instrumentation 1 60 60 - M H - - - - - - - - - - - -

CLO-5 : Design PLC, SCADA, HART protocols and wireless interfacings 2 60 60 - M H - - - - - - - - - M - H

CLO-6 : Improve the standards of industrial instrumentation and networking protocols 2 60 60 - M H - M - - - M - - - H L -

Duration (hour)

CONTROL SYSTEMS BASICS AND BEYOND

INDUSTRIAL PROCESS TECHNIQUES AND INSTRUMENTATION

PROCESS-CONTROL METHODS INDUSTRIAL STANDARDS AND

METHODS FOR CALIBRATION AND CONTROLLER TUNING

CYBER SYSTEMS AND NETWORKING

S-1 SLO-1

Elements of Open- and Closed-Loop Systems

Need of Controllers Batch Processes Instrument Calibration and Controller Tuning

Programmable Logic Controller Basics

SLO-2 Transfer function Open-Loop Control Batch Processes Control Requirements Reasons for Performing Calibrations Requirement of communication networks for PLC, PLC to Computer.

S-2

SLO-1 Continuous-time systems, and convolution Closed-Loop Control Types of Batch Processes Calibration Preparation Elements of SCADA system

SLO-2 Impulse response and step response Process Behavior Continuous Processes Standard Calibration Procedure Discrete control, Analog control, Master Terminal Unit, Remote Terminal Unit, Operator interface

S-3 SLO-1 Feedback Control Systems Selecting a Controller

Continuous Processes Control Requirements

Five-Point Calibration Procedure Distributed Control System (DCS)

SLO-2 Basic Characteristics of feedback control systems

On-Off Control Measurement Devices (Sensors): Dynamic, Static

Process Calibrators DCS Architectures, Local Control Unit

S-4 SLO-1 Stability, reference tracking Continuous Control, Proportional Mode Feedback Loop Interface Instruments Sensor Calibration

HART communication protocol, communication modes

SLO-2 Disturbance rejection, sensitivity and robustness

Integral Mode, Derivative Mode Block diagram of a closed-loop automated system

Transmitter Calibration Industrial Wireless Technologies

S-5

SLO-1 Typical control system structures for SISO, MISO, SIMO, and MIMO plants

Advanced Control Techniques Transmitters, Transducers Tuning the Controller Wireless Architecture, Topologies

SLO-2 State-space design Cascade Control Monitoring Instruments: Indicators, Alarms, Recorders

Trial-and-Error Tuning Method Wireless Infrastructure in Industrial Control Systems,


S-6 SLO-1 State variables Feed-Forward Control

Manipulation Devices (The Final Control Element): The Solenoid Valve, DC and AC Motors, The Control Valve

Ziegler-Nichols Tuning Methods Self-Organizing Networks

SLO-2 Solution of state equations Ratio Control Instrumentation Symbology Ziegler-Nichols Continuous-Cycling Method

Wireless Standards

S-7 SLO-1 Eigenvalues and eigenvectors Adaptive Control General Instrument Symbols

Ziegler-Nichols Continuous-Cycling Method

Threats in Industrial Control Systems

SLO-2 Jacobian linearization technique Pneumatic Controllers Tag Numbers Ziegler-Nichols Reaction-Curve Tuning Method

Network Backbones: Hubs, Switches, Bridges, Gateways.

S-8 SLO-1 State transformations and diagonalisation Panel-Mounted Controllers Line Symbols

Ziegler-Nichols Reaction-Curve Tuning Method

Hierarchy of Industrial Networks

SLO-2 Transformation to phase-variable canonical form

Personal Computers Valve and Actuator Symbols Controller Autotuning Troubleshooting I/O Interfaces

S-9

SLO-1 Basics of Controllability and Observability Programmable Logic Controllers Reading a Single Loop PID controller Network Communication Standards

SLO-2 Duality property. Stability Distributed Control Systems (DCS) Information Block PID controller tuning rules

Fieldbus Networks

Learning Resources

1. Nagrath I.J and Gopal M, “Control Systems Engineering”, New Age Publishers, 5 th Edition, 2009. 2. Cyber-security of SCADA and Other Industrial Control Systems, Editors: Colbert, Edward J.

M., Kott, Alexander (Eds.) ISBN 978-3-319-32125-7 3. Frank Petruzella. D, “Programmable Logic Controllers”, Tata McGraw Hill Third Edition, 2010.

4. Bolton. W, “Progra ble Logic Controllers mma ” Fifth Edition, Elsevier Newnes, 2009. 5. Michael Lucas, “Distributed Control Systems”, Van Nostrand Reinhold Co., 1986. 6. Industrial Automated Systems: Instrumentation and Motion Control, Terry Bartelt, ISBN-13: 978-1-4354-

8888-5

Learning Assessment

Bloom’s

Level of Thinking


CLA – 1 (10%) CLA – 2 (15%) CLA – 3 (15%) CLA – 4 (10%)#


Level 1 Remember

40 % - 30 % - 30 % - 30 % - 30% - Understand

Level 2 Apply

40 % - 40 % - 40 % - 40 % - 40% - Analyze

Level 3 Evaluate

20 % - 30 % - 30 % - 30 % - 30% - Create

Total 100 % 100 % 100 % 100 % 100 %


Course Designers


1. Mr. Athif Shah, Chairman, Abe Semicondutor, [email protected] 1. Dr. Meenakshi, Professor of ECE, CEG, Anna University, [email protected] 1. Dr. Bandaru Ramakrishna, SRMIST

2. Dr. Madan Kumar Lakshmanan, Senior Scientist, CEERI, [email protected] 2. Dr. Venkatesan, Sr. Scientist, NIOT, Chennai, [email protected] 2. Dr. Vivek Maik, SRMIST


Course Code


CYBER SECURITY Course


L T P C

3 0 0 3



Courses NIL Progressive

Courses NIL



CLR-1 : Learn Cyber Security Concepts 1 2 3 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

CLR-2 : Understand the standards and protocols for cyber security

Leve

l of T

hink

ing

(Blo

om)

Exp

ecte

d P

rofic

ienc

y (%

)

Exp

ecte

d A

ttain

men

t (%

)

Eng

inee

ring

Kno

wle

dge

Pro

blem

Ana

lysi

s

Des

ign

& D

evel

opm

ent

Ana

lysi

s, D

esig

n, R

esea

rch

Mod

ern

Too

l Usa

ge

Soc

iety

& C

ultu

re

Env

ironm

ent &

Sus

tain

abili

ty

Eth

ics

Indi

vidu

al &

Tea

m W

ork

Com

mun

icat

ion

Pro

ject

Mgt

. & F

inan

ce

Life

Lon

g Le

arni

ng

PS

O -

1

PS

O -

2

PS

O –

3

CLR-3 : Design and understand cryptography and secure communications

CLR-4 : Understand security and privacy threats in computer networks

CLR-5 : Develop Deep Understanding On cyber crime issues and forensics

CLR-6 : Gain Overall Understand Of The cyber security for real world applications


CLO-1 : Ability to understand cyber security working and protocols 1 60 70 - H - - L - - - - - - - - -

CLO-2 : Able to design secure systems using cyber security standards 2 60 70 M - - - - - - - - - M - - -

CLO-3 : Implement different practical digital encrypted systems with minimal supervision 3 60 70 - M H - H - - - - - - - - L

CLO-4 : Develop Deep Understanding on selection of hardware and software’s for designing cyber physical system 1 60 70 - M - - - - - - - - H - - -

CLO-5 : Come up with cost effective, reliable, robust and feasible designs for real world problems 3 60 70 - M M - H - - - - H - - - H

CLO-6 : Design and implement real time systems and address the problems and limitations 3 60 70 - - M - H - - - - - H L - M

DURATION (HOUR)

DIGITAL SECURITIES ONLINE ANONYMITY CRYPTOGRAPHY AND

SECURE COMMUNICATION CYBER CRIME ISSUES AND

INVESTIGATION DIGITAL FORENSICS

S-1 SLO-1 Introduction Introduction Introduction To Cryptography Unauthorized Access Introduction To Digital Forensics,

SLO-2 Types Of Cyber Attacks Anonymous Networks Difference Between Encryption & Cryptography

Computer Intrusions, Forensic Software And Hardware

S-2 SLO-1 Digital Privacy TOR Networks Cryptographic Functions White Collar Crimes, Analysis And Advanced Tools,

SLO-2 Online Tracking TOR Applications Cryptographic Types Viruses And Malicious Code, Forensic Technology And Practices

S-3 SLO-1 Privacy Laws I2P Network Cryptographic Applications Internet Hacking And Cracking, Forensic Ballistics And Photography

SLO-2 Malware - Definition And Working Principle I2P Configurations Cryptographic Systems Trust Models Virus Attacks, Face, Iris And Fingerprint Recognition

S-4 SLO-1 Hacking - Definition And Working Principle Freenet Principle & Working Cryptographic Key Pair Software Piracy, Intellectual Property Audio Video Analysis,

SLO-2 Pharming - Definition And Working Principle

Darknet Principle & Working Disk Encryption Using Windows Bitlocker

Mail Bombs, Exploitation Windows System Forensics

S-5

SLO-1 Phishing - Definition And Working Principle Sharenet Principle & Working Disk Encryption Using Open Source Tools

Digital Laws And Legislation, Law Enforcement Roles And Responses,

Linux System Forensics,

SLO-2 Ransomware- Definition And Working Principle

Anonymous OS – Tails Multi Task Encryption Tools Investigation Tools, E-Discovery

Comparison Between Windows & Linux System Forensics

S-6 SLO-1 Antivirus - Definition And Working Principle Secure File Sharing Attacking Cryptographic Systems EDRM Model, Digital Evidence Collection WIFI Security (War-Driving)

SLO-2 Other Security Solution VPN Design And Architecture Countermeasures Against Cryptography Attacks

Evidence Preservation, E-Mail Investigation

Network Forensics,

S-7 SLO-1 Secure Online Browsing Proxy Server Securing Data In Transit E-Mail Tracking, Ip Tracking Network Forensics - Application & Examples


SLO-2 Email Security Connection Leak Testing Cloud Storage Encryption E-Mail Recovery, Mobile Forensics

S-8 SLO-1 Social Engineering Secure Search Engine Encrypt DNS Traffic Search And Seizure Of Computers,

Mobile Forensics – Application & Examples

SLO-2 Secure WIFI Settings Web Browser Privacy Configuration Encrypt DNS Traffic For Email Communication

Recovering Deleted Evidences Cloud Forensics.

S-9

SLO-1 Cloud Storage Security Anonymous Payment Attacking Cryptographic Systems Password Cracking Cloud Forensics Application & Examples

SLO-2 IOT Security Payment Security Measures Securing Data In Transit Recovering Hard Disk Data Net Neutrality & Challenges Of Forensic Science

Learning Resources

1. Digital Privacy and Security Using Windows: A Practical Guide By Nihad Hassan, Rami Hijazi, 1st Edition, Apress Publications, 2017

2. Digital Forensics, DSCI - Nasscom, 2012. 3. Cyber Crime Investigation, DSCI - Nasscom, 2013.

Learning Assessment

Bloom’s

Level of Thinking


CLA – 1 (10%) CLA – 2 (15%) CLA – 3 (15%) CLA – 4 (10%)#


Level 1 Remember

40 % - 30 % - 30 % - 30 % - 30% - Understand

Level 2 Apply

40 % - 40 % - 40 % - 40 % - 40% - Analyze

Level 3 Evaluate

20 % - 30 % - 30 % - 30 % - 30% - Create

Total 100 % 100 % 100 % 100 % 100 %


Course Designers





Course Code


CLOUD AND DISTRIBUTED SYSTEMS FOR CYBER PHYSICAL SYSTEM Course


L T P C

3 0 0 3



Courses NIL

Progressive Courses

NIL



CLR-1 : Understand the fundamental ideas behind cloud computing, the evolution of the paradigm, its applicability; Benefits, as well as current and future challenges.

1 2 3 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

CLR-2 : Learn cloud enabling technologies, virtualization concepts and virtual machines.

Leve

l of T

hink

ing

(Blo

om)

Exp

ecte

d P

rofic

ienc

y (%

)

Exp

ecte

d A

ttain

men

t (%

)

Eng

inee

ring

Kno

wle

dge

Pro

blem

Ana

lysi

s

Des

ign

& D

evel

opm

ent

Ana

lysi

s, D

esig

n, R

esea

rch

Mod

ern

Too

l Usa

ge

Soc

iety

& C

ultu

re

Env

ironm

ent &

Sus

tain

abili

ty

Eth

ics

Indi

vidu

al &

Tea

m W

ork

Com

mun

icat

ion

Pro

ject

Mgt

. & F

inan

ce

Life

Lon

g Le

arni

ng

PS

O -

1

PS

O -

2

PS

O –

3

CLR-3 : Explore distributed system models and computer clusters for scalable parallel computing.

CLR-4 : Understand the concept of intelligent data in cloud and distributed computing.

CLR-5 : Explore distributed cloud storage technologies and relevant distributed file systems.

CLR-6 : Gain overall knowledge of cloud and distributed computing in real world applications.


CLO-1 : Explain the fundamental ideas behind cloud computing, cloud models and current trends. 1,2 80 80 H H - - - - - - - - - - H - -

CLO-2 : Analyze the need for virtualization in a cloud environment and outline their role in enabling the cloud computing system Model.

1,2 85 80 H H - - - - - - - - - - H - -

CLO-3 : Apply distributed system model and understand the design principles of computer clusters. 2,3 90 85 H H - - - - - - - - - - H - -

CLO-4 : Know the use of computational methods associated with cloud and distributed computing. 2,3 90 85 H H - - - - - - - - - - H - -

CLO-5 : Illustrate the fundamental concepts of distributed algorithms, standards and protocols. 1,2,3 80 80 H H - - - - - - - - - - H - -

CLO-6 : Understand the state of the art trend in the cloud and distributed computing. 1,2,3 85 85 H H - - - - - - - - - - H - -

Duration

(Hour) CLOUD COMPUTING CLOUD TECHNOLOGY DATA & INTELLIGENCE IN THE CLOUD DISTRIBUTED COMPUTATIONS

DISTRIBUTED ALGORITHMS

S-1 SLO-1 What Is Cloud Computing Introduction

Historic Review Of Database Storage Model

Distributed Computing Definition Topology Abstraction And Overlays

SLO-2 Cloud Computing Service Models Web Technology – HTTP, HTML Relational Is The New Hoover Relation To Computer System Concepts Classification Of Algorithms And Basic Concepts

S-2 SLO-1 Cloud Computing Deployment Models Web Technology – XML, JSON

Database As A Service, Data Storage In The Cloud

Relation To Parallel Multiprocessor / Multicomputer Systems

Complexity Measure And Concepts

SLO-2 Public Cloud – Definitions, Advantages Web Technology – Javascript , AJAX Backup Or Disaster Recovery Message Passing Systems Versus Shared Memory Systems

Program Structure

S-3 SLO-1 Private Cloud – Definitions, Advantages Model View Controller

Business Drivers For The Adoption Of Different Data Models

Primitives For Distributed Computations Elementary Graph Algorithms

SLO-2 Hybrid Cloud – Definitions, Advantages Automatic Computing Basically Available, Soft State, Eventually Consistent (BASE)

Synchronous Vs Asynchronous Executions Synchronizers

S-4 SLO-1

Community Cloud – Definitions, Advantages

Virtualization – Application Virtualization Column Oriented, Document Oriented And Key Value Stores

Design Issues And Challenges Maximal Independent Set (MIS)

SLO-2 Internal And External Factors For Choosing Cloud Model

Desktop Virtualization, Server Virtualization

Intelligence In The Cloud, Web 2.0 Selection And Coverage Of Topics Connected Dominating Set

S-5 SLO-1 Legal Aspects Of Cloud Computing Server Virtualization, Storage Virtualization Relational Databases

A Distributed Program And Model Of Distributed Executions

Compact Routing Tables

SLO-2 Privacy And Security In Cloud Implementing Virtualization Text Data, Natural Language Processing Models Of Communication Networks Leader Election


S-6 SLO-1 The Ethical Dimension In Cloud Hypervisor

Intelligent Searching, Search Engine Overview,

Global State Of The Distributed Systems Challenges In Designing Distributed Graph Algorithms

SLO-2 Social Aspects In The Cloud Map Reduce The Crawler, The Indexer, Ranking, Vector Space Model

Cuts Of The Distributed Computation Object Replication Problems

S-7 SLO-1 Economic And Political Aspects Map Reduce Example

Classification, Measuring Retrieval Performance

Past And Future Cones Of An Event Message Ordering Paradigms

SLO-2 Green Information Technology Scaling With Map Reduce Clustering, Web Structure Mining Models Of Process Communications Asynchronous Execution With Synchronous Communication

S-8 SLO-1 Cloud Economics

Server Failure, Programming Model Of Map Reduce

Enterprise Search, Multimedia Search, Collective Intelligence

Framework For A System Of Logical Time With Clocks

Synchronous Program Order On A Synchronous System

SLO-2 Outsourced , Managed And Services In The Cloud

Apache Hadoop Tagging, Recommendation And Collective Intelligence In The Enterprise

Scalar Time, Vector Time And Efficient Implementation Of Vector Clocks

Group Communication And Causal Order

S-9 SLO-1 Total Cost Of Ownership A Brief History Of Hadoop Personalization, Crowd Sourcing Jard-Jourdans Adaptive Technique Total Order And Multicast

SLO-2 Categories Of Cost Efficiencies Amazon Elastic Map Reduce Text Visualization Matrix And Virtual Time Propagation Trees For Multicast

Learning Resources

1. Richard Hill, Laurie Hirsch, Peter Lake, And Siavash Moshiri, Guide To Cloud Computing And Practice, 2nd Edition, Springer Verlag, 2013.

2. Ajay D Kshemkalyani And Mukesh Singhal, “Distributed Computing – Principles, Algorithms And Systems,” 2nd Edition, Cambridge University Press, 2008.

3. Dan C. Marinescu,” Cloud Computing Theory And Practice”, 2nd Edition, Elsevier Press, 2018.

Learning Assessment

Bloom’s

Level of Thinking


CLA – 1 (10%) CLA – 2 (15%) CLA – 3 (15%) CLA – 4 (10%)#


Level 1 Remember

40 % - 30 % - 30 % - 30 % - 30% - Understand

Level 2 Apply

40 % - 40 % - 40 % - 40 % - 40% - Analyze

Level 3 Evaluate

20 % - 30 % - 30 % - 30 % - 30% - Create

Total 100 % 100 % 100 % 100 % 100 %


Course Designers


1. Mr. Athif Shah, Chairman, Abe Semicondutor, [email protected] 1. Dr. Meenakshi, Professor of ECE, CEG, Anna University, [email protected] 1. Dr. Vasanthi S,SRMIST

2. Dr. Madan Kumar Lakshmanan, Senior Scientist, CEERI, [email protected] 2. Dr. Venkatesan, Sr. Scientist, NIOT, Chennai, [email protected] 2. Dr. Vivek Maik, SRMIST


Course Code


DESIGN OF CYBER PHYSICAL SYSTEM Course


L T P C

3 0 0 3



Courses NIL

Progressive Courses

NIL



CLR-1 : Able to understand the design of human in the loop cyber physical systems 1 2 3 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

CLR-2 : Design knowledge of energy cyber physical systems

Leve

l of T

hink

ing

(Blo

om)

Exp

ecte

d P

rofic

ienc

y (%

)

Exp

ecte

d A

ttain

men

t (%

)

Eng

inee

ring

Kno

wle

dge

Pro

blem

Ana

lysi

s

Des

ign

& D

evel

opm

ent

Ana

lysi

s, D

esig

n, R

esea

rch

Mod

ern

Too

l Usa

ge

Soc

iety

& C

ultu

re

Env

ironm

ent &

Sus

tain

abili

ty

Eth

ics

Indi

vidu

al &

Tea

m W

ork

Com

mun

icat

ion

Pro

ject

Mgt

. & F

inan

ce

Life

Lon

g Le

arni

ng

PS

O -

1

PS

O -

2

PS

O –

3

CLR-3 : Learn how Symbolic synthesis for cyber physical systems works

CLR-4 : Design principles of Intelligent wireless sensor networks in cyber physical systems

CLR-5 : Through simple hands on exercise learn and implement humans in the loop software

CLR-6 : Learn overall procedural and functional steps involved in design of cyber physical systems


CLO-1 : Able to design the cyber physical systems with Industry 4.0 standards 2,3 70 70 L M H - - - - - - - - - - - -

CLO-2 : Able to design wireless sensor systems using intelligent methods 2,3 70 70 L M H - - - - - - - - - - - -

CLO-3 : Implement different practical cyber physical systems with minimal supervision 2,3 70 70 L M H - - - - - - - - - - - -

CLO-4 : Develop Deep Understanding on selection of hardware and software’s for designing cyber physical system 2,3 70 70 L M H - - - - - - - - - - - -

CLO-5 : Come up with cost effective, reliable, robust and feasible designs for real world problems 2,3 70 70 L M H - - - - - - - - - - - -

CLO-6 : Design and implement real time systems and address the problems and limitations 3 90 80 - - H - M - - - M - - M H L -

DURATION (HOUR)

HUMAN IN THE LOOP CYBER PHYSICAL SYSTEMS

ENERGY CYBER PHYSICAL SYSTEMS SYMBOLIC SYNTHESIS FOR CYBER

PHYSICAL SYSTEMS

INTELLIGENT WIRELESS SENSOR NETWORKS IN CYBER PHYSICAL

SYSTEMS

HUMANS IN THE LOOP: A SIMPLE HANDS ON

S-1 SLO-1 The Evolution Of Cyber Physical Systems Introduction And Motivation

Symbolic Synthesis Introduction And Motivation

Intelligent Systems Motivation And Essentiality

A Sample Behavior Change Intervention App

SLO-2 Humans As Elements In Cyber Physical Systems

System Description And Operational Scenarios

Basic Techniques Of Symbolic Synthesis Wireless Sensor Networks The Sample App’s Base Architecture

S-2 SLO-1 Human Sensing And Virtual Communities Key Design Drivers And Quality Attributes

Problem Definition And Solving The Synthesis Problem

Deployment Of Wireless Sensor Networks In Cyber Physical Systems

The Android App And Server Set Up

SLO-2 Taxonomies For Human In The Loop CPS Key Design Drivers And Quality Attributes Problem Definition And Solving The Synthesis Problem

Deployment Of Wireless Sensor Networks In Cyber Physical Systems

Enhancing The Sample App With Human In The Loop Emotion Awareness

S-3 SLO-1 Humans As Set Of Sensors Key System Principles Asynchronous Design Primitives Intelligent Wireless Sensor Networks Choosing A Machine Learning Technique

SLO-2 Humans As Communication Nodes Performance Objectives In Terms Of Architectural Design

Construction Of Symbolic Models Comparison Between Wireless And Intelligent Wireless Sensor Networks

Implementing Emotion Awareness

S-4 SLO-1 State Inference And Human Nature

A Possible Way Forward Cyber Paradigm For Sustainable Socio Ecological Energy Systems

Construction Of Symbolic Models Information Security And Cyber Physical Systems Installing Android Studio

SLO-2 Humans As Processing Nodes Physics Based Composition Of CPS For An Socio Ecological Energy Systems

Advanced Techniques For Construction Of Symbolic Models

Attacks And Vulnerabilities In Cyber Physical System

Cloning The Android Project

S-5

SLO-1 Humans As Processing Nodes Physics Based Composition Of CPS For An Socio Ecological Energy Systems

Advanced Techniques For Construction Of Symbolic Models

Attack Resilient Design Deploying The Server Protocols

SLO-2 Actuation In CPS Dymonds Based Standards For CPS Of An Socio Ecological Energy Systems

Continuous Time Controllers And Software Tools

Attack Resilient Design Examples Installing The Software And Cloning The Server’s Project


S-6 SLO-1 Humans And Robots As Actuators

Dymonds Based Standards For CPS Of An Socio Ecological Energy Systems

Controller Timing And Control Design For Resource Efficiency

Example Application With Distinct Intelligence Level

Setting Up The Database And Deploying The Server On Tomcat

SLO-2 Powerline Communication Dymonds Based Standards For CPS Of An Socio Ecological Energy Systems

Computational Complexity And Time Reduction

Example Application With Smart Grid Handling Emotions On The Server

S-7 SLO-1

Technologies For Supporting Humans In Loop CPS

Interaction Variable Based Automated Modeling And Control

Less Frequent Sampling And Event Based Control

Example Application With Smart Field Monitoring

Creating The Web Interface

SLO-2 Technologies For Supporting Humans In Loop CPS

It Enabled Evolution Of Performance Objectives

Controller Software Structures Example Application With Variant Smartness

Creating The Servers Background Thread

S-8 SLO-1 Human In Loop Application Examples

It Enabled Evolution Of Performance Objectives

And Sharing Of Computing Resources CASE STUDY: Smart Space Systems Processing Incoming Emotions

SLO-2 Human In Loop Industry Examples Distributed Optimization Analysis And Simulation Of Feedback Control Systems

CASE STUDY: Smart Space Systems Handling New Emotion Interferences

S-9

SLO-1 Human In Loop Healthcare Examples Distributed Optimization Analysis And Simulation Of Feedback Control Systems

CASE STUDY: Smart City Systems Providing Positive Reinforcement

SLO-2 Human In Loop Smartphone And Social Networking

Summary And Open Challenges Analysis And Simulation Of Feedback Control Systems

CASE STUDY: Smart City Systems Creating A Motivational Dialog Box

Learning Resources

1. David Nunes, Jorge Sa Silva, And Fernando Boavida, A Practical Introduction To Human-In-The-Loop Cyber Physical Systems, 1st Edition, Wiley & IEEE PRESS, 2018.

2. Sherali Zeadally And Nafaa Jabeur, “Cyber Physical System Design With Sensor Networking Technologies,” 1st Edition IET Press, London, 2016.

3. Raj Rajkumar, Dionisio De Niz, And Mark Klein, “Cyber Physical Systems” , 1st Edition, Addison Wesley Publishers, 2017.

Learning Assessment

Bloom’s

Level of Thinking


CLA – 1 (10%) CLA – 2 (15%) CLA – 3 (15%) CLA – 4 (10%)#


Level 1 Remember

40 % - 30 % - 30 % - 30 % - 30% - Understand

Level 2 Apply

40 % - 40 % - 40 % - 40 % - 40% - Analyze

Level 3 Evaluate

20 % - 30 % - 30 % - 30 % - 30% - Create

Total 100 % 100 % 100 % 100 % 100 %


Course Designers





Course Code


MOBILE CYBER PHYSICAL SYSTEM Course


L T P C

3 0 0 3



Courses NIL

Progressive Courses

NIL



CLR-1 : Learn Mobile Cyber Physical System Concepts 1 2 3 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

CLR-2 : Understand Mobile System Design For Embedded Applications

Leve

l of T

hink

ing

(Blo

om)

Exp

ecte

d P

rofic

ienc

y (%

)

Exp

ecte

d A

ttain

men

t (%

)

Eng

inee

ring

Kno

wle

dge

Pro

blem

Ana

lysi

s

Des

ign

& D

evel

opm

ent

Ana

lysi

s, D

esig

n, R

esea

rch

Mod

ern

Too

l Usa

ge

Soc

iety

& C

ultu

re

Env

ironm

ent &

Sus

tain

abili

ty

Eth

ics

Indi

vidu

al &

Tea

m W

ork

Com

mun

icat

ion

Pro

ject

Mgt

. & F

inan

ce

Life

Lon

g Le

arni

ng

PS

O -

1

PS

O -

2

PS

O –

3

CLR-3 : Design and understand green cloud computing

CLR-4 : Understand security and privacy threats in mobile networking

CLR-5 : Develop Deep Understanding On IoT and ubiquitous computing

CLR-6 : Gain Overall Understand Of The Real Time Systems For Industrial Applications


CLO-1 : Understand the architecture of mobile cyber physical system 1 80 70 H - - - - - - - - - - - - - -

CLO-2 : Design Mobile Cloud computing communication systems 1 75 70 - M - - - - - - - - - - - -

CLO-3 : Implement different practical real time systems with minimal supervision 3 75 70 - M H - - - - - - - - - - - H

CLO-4 : Develop Deep Understanding on selection of hardware and software’s for designing mobile cyber physical systems 3 75 70 - H - - - - - - - - - - - H

CLO-5 : Come up with cost effective, reliable, robust and feasible designs for real world problems 1 70 70 - M - - - - - - - - - - - - -

CLO-6 : Design and implement real time systems and address the problems and limitations 2 70 70 - M - - - - - - - - - - M - -

DURATION (HOUR)

MOBILE CLOUD COMPUTING GREEN CLOUD COMPUTING AND

RESOURCE ALLOCATION SECURITY AND PRIVACY THREATS WEB SERVICES IOT and UBIQUITOUS COMPUTING

S-1 SLO-1 Introduction, fundamental components Green cloud computing

Features of security and privacy issues in mobile clouds

Introduction to service oriented architecture

Internet of things introduction

SLO-2 Mobile computing Dimensions in algorithms of green clouds Main security and privacy problems Web services concepts Radio frequency identifcation technology

S-2 SLO-1 Wireless networks Creating an algorithm for green clouds Data over collection problems Web services architecture Wireless sensor networks technology

SLO-2 Main Techniques in Cloud Computing Sample Energy Aware Scheduling Algorithm

Data / Privacy Control Problems Specification of Web Services Sensor Technology

S-3 SLO-1 Mobile cloud computing architecture

Preemptable algorithm execution in mobile cloud systems

Trust management problems Simple object access protocol Sensor networks

SLO-2 Mobile cloud computing architecture Structure of cloud resource allocation mechanisms

Multi tenancy problems Representational state transfer Wireless sensor networks

S-4 SLO-1 Hybrid cloud resource manager

Steps of cloud resource allocation mechanisms

Threat taxonomy Javascript object notation Powerline communication

SLO-2 Manipulations of Cloud Resource Manager Messaging Methods: Push Pull Confidentiality, Integrity and Availability WS – Coordination IOT and Powerline Communication

S-5 SLO-1

Optimization Mechanisms of Hybrid Cloud Computing

Concept of Resource Allocation Model in Cloud Computing

Massive Data Mining Service Oriented Architecture (SOA) Ubiquitous Computing

SLO-2 Security Challenges and Solutions in Mobile Clouds

Resource Allocation Algorithms in Cloud Computing

Attach Interfaces Auditability Forensics and Legal Issues

SOA Understanding Services Ubiquitous Computing Properties

S-6 SLO-1 Security Challenges and Solutions in Mobile Clouds

Round Robin Algorithm Threat Models Basic Concepts Integrating SOA with Cloud Computing Tagging Sensing and Controlling


SLO-2 Optimization of Data Processing and Storage in Mobile Clouds

Round Robin Algorithm Example Insider Threats – Service Side and Customer Side

Web Service Business Process Execution Language

Tagging Sensing and Controlling

S-7 SLO-1 Cloud computing performance Cloud list scheduling algorithm

Outsider threats – attack methods and goals

Web service security and specifications Autonomous systems in ubiquitous computing

SLO-2 Two technical dimensions Cloud list scheduling algorithm example Crucial issues in outsider threats Ws-security framework Autonomous systems in ubiquitous computing

S-8

SLO-1 Basic task scheduling method Min-min scheduling algorithm Crucial security dimensions Big data and service computing Smart devices: components and services

SLO-2 Basic task scheduling method Min-min scheduling example Infrastructure security Overview of big data CASE STUDY: Digital Manufacturing / Industry 4.0: The Hannover Centre For Production Engineering (Pzh) Approach.

S-9

SLO-1 Example of Evaluation Modelizations CASE STUDY: Project Example on Green Cloud Computing and Resource Allocation

Network, Host and Application Layer Big Data Processing CASE STUDY: Digital Manufacturing / Industry 4.0: The Bosch Software Innovations Approach

SLO-2 CASE STUDY: Calculate Total Execution Time on Mobile CPS project

CASE STUDY: Project Example on Green Cloud Computing and Resource Allocation

CASE STUDY: Mobile Data Security and Storage, Identity and Access Management

CASE STUDY: Phase Reconfigurable Shuffle Optimization

CASE STUDY: Digital Manufacturing / Industry 4.0: The US Digital Manufacturing and Design Innovation Institute Approach

Learning Resources

1. Meikang Kiu , “Mobile Cloud Computing – Models, Implementation And Security” 5th Edition, CRC Press, 2015.

2. Dietmar P.F. Moller, “Computing Fundamentals In Cyber Physical Systems,” 1st Edition, Springer 2015 3. Edward D Lamie, “Real Time Embedded Multi Threading” , 2nd Edition, Newnes Elsevier Publication, 2016.

Learning Assessment

Bloom’s

Level of Thinking


CLA – 1 (10%) CLA – 2 (15%) CLA – 3 (15%) CLA – 4 (10%)#


Level 1 Remember

40 % - 30 % - 30 % - 30 % - 30% - Understand

Level 2 Apply

40 % - 40 % - 40 % - 40 % - 40% - Analyze

Level 3 Evaluate

20 % - 30 % - 30 % - 30 % - 30% - Create

Total 100 % 100 % 100 % 100 % 100 %


Course Designers






2018 Regulations

Open Elective Courses (O)




Course Code 18ECO101T Course Name SHORT RANGE WIRELESS COMMUNICATION Course

Category O Open Elective

L T P C

3 0 0 3


Nil Co-requisite

Courses Nil

Progressive Courses

Nil

Course Offering Department Electronics and Communication Engineering Data Book / Codes/ Standards Nil

Course Learning Rationale (CLR): Understand the concept of Short range Wireless Communication Learning Program Learning Outcomes (PLO)

CLR-1 : Overview of different modulation scheme and wireless system 1 2 3 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 CLR-2 : To understand the various components used to implement a short-range radio system.

Leve

l of T

hink

ing

(Blo

om)

Exp

ecte

d P

rofic

ienc

y (%

)

Exp

ecte

d A

ttain

men

t (%

)

Eng

inee

ring

Kno

wle

dge

Pro

blem

Ana

lysi

s

Des

ign

& D

evel

opm

ent

Ana

lysi

s, D

esig

n, R

esea

rch

Mod

ern

Too

l Usa

ge

Soc

iety

& C

ultu

re

Env

ironm

ent &

Sus

tain

abili

ty

Eth

ics

Indi

vidu

al &

Tea

m W

ork

Com

mun

icat

ion

Pro

ject

Mgt

. & F

inan

ce

Life

Lon

g Le

arni

ng

PS

O–1

: Pro

fess

iona

l

Ach

ieve

men

t

PS

O –

2: P

roje

ct M

anag

emen

t

Tec

hniq

ues

PS

O –

3: A

naly

ze &

Res

earc

h

CLR-3 : Analysis of the various kinds of transmitters and receivers used for Short range Wireless Communication.

CLR-4 : To know about regulations and standards of ISM band communications

CLR-5 : Design and analysis of short-range radio like UWB and Visible light.

Course Learning Outcomes (CLO): The purpose of this course is to introduce practically all aspects of radio communication including wave propagation, antennas, transmitters, receivers, design principles, telecommunication regulations

CLO-1 : To cover the various forms of signals used for information transmission and modulation, and overall wireless system properties.

2 80 70 L - - - - - - - - - - - - H -

CLO-2 : To present various component types that can be used to implement a short-range radio system. 2 85 75 - - M L - - - - - - - - H - -

CLO-3 : To describe the various kinds of transmitters and receivers. 2 75 70 - - H M - - - - - - - - - H -

CLO-4 : To covers regulations and standards of ISM band communications 2 85 80 M - - - - - - - - - - - M - - CLO-5 : To covers some of the most important new developments in short-range radio like UWB and Visible light. 2 85 75 - - L M - - - - - - - - - - H

Duration (hour) Wireless Systems Baseband Coding basics RF transceivers Wireless standards Optical wireless Technologies

9 9 9 9 9

S-1 SLO-1 Introduction to wireless systems Types of Antennas-Dipole, groundplane, loop RF Receivers- Introduction

Technical Background to the WPAN Concept - Regulation and Standardization Issues

Fundamentals of UROOF Technologies

SLO-2 Reasons for the Spread of Wireless Applications

Helical, Patch antennas RF Source-Frequency control European Consortium: Overview Conversion from RF to Optical Domain

S-2 SLO-1 Characteristics of Short-range Radio

Antenna Characteristics-Impedence, directivity and gain, Effective area

Modulation types Millimeter-Wave Applications and Services - PAN scenarios in the IST Magnet project

Conversion from Optical to RF Domain

SLO-2 Wireless Applications Polarization, Bandwidth, Antenna factor Amplifiers Typical LDR services connected to the IST-FP6 MAGNET project

Optical Microwave Mixing Used for UWB Over Systems

S-3 SLO-1

Elements of Wireless Communication Systems-Transmitter

Baseband Data Format and Protocol - Radio Communication Link Diagram

Impedance matching in transmitter and receivers

Frequency Regulation and Standardization Issues - Optional UM4 usage models issued from the IEEE802.15.3c TG

Integrated UROOF Transceiver (IUT)

SLO-2 Elements of Wireless Communication Systems-Receiver

Code Hopping Filtering Flexible antenna gain, 60 GHz regulation status for wireless transmissions.

Mixed Wireless-wired UROOF Channel, Carrier-to-noise Ratio

S-4 SLO-1

Wireless Local Area Networks (WLAN)-WIFI

Baseband Coding-Digital systems SAW band pass filter matching Channel Propagation Characterization and Modeling- 60 GHz Propagation Measurements

Laser and Photodetector Noise Baseline,

SLO-2 Network Architecture Wireless Microphone System Tuned Radio Frequency (TRF) Propagation Channel Characterization

Clipping Distortion Implication , Latency

S-5 SLO-1 Bluetooth Transceiver RF Frequency and Bandwidth-factors ASH Receiver Multipath Propagation Modeling Modelling the Propagation through the Fibre


SLO-2 Bluetooth Modes Propagation characteristics Super regenerative Receiver –Block diagram

France Telecom Propagation Channel Models

Analysis of UWB Technologies for UROOF- Comparing UWB Technologies for Radio-over- fibre

S-6 SLO-1 Zigbee Architecture, Frame Structure Modulation types

Super regenerative Receiver –Operation

MSK-Based System for LOS Gb/s Communications

MB-OFDM Over Multimode Fibre

SLO-2 Applications and conflicts Modulation for digital event communication Super heterodyne Receiver-Block diagram

System architecture for an MSK-based system to operate in a LOS channel.

All-optical Generation of Ultra-wideband Impulse Radio

S-7 SLO-1

Ultra-wideband Technology-Bit Sequence detection

Continuous Digital Communication Super heterodyne Receiver- Operation OFDM-Based System for NLOS Gb/s Communications

Operation Principles and Theoretical Approach

SLO-2 UWB Block Diagram Advanced Digital Modulation Direct Conversion Receiver- Block diagram

System architecture for an OFDM-based system to operate in a NLOS channel.

VLC Link –Transmitter

S-8 SLO-1 Wireless Modules-Japan,UK,USA Spread Spectrum-DHSS Direct Conversion Receiver- Operation System Design Aspects-Channel Plan The VLC Channel

SLO-2 Wireless Modules-Austria, Honeywell, Norway

Spread Spectrum-FHSS Digital Receivers-Software radio 60 GHz Channel Characteristics, Baseband Modulation: OFDM versus Single Carrier

Receiver, Modulation

S-9 SLO-1 FCC Regulations-Terms and definitions RFID-transceiver Software radio operation 60 GHz Analog Front-End Architectures Potential Applications

SLO-2 Nomenclature for defining Emission, modulation and transmission

Design issues for RFID Repeaters Multiple Antenna Technologies Challenges

Learning Resources

1. Alan Bensky, “Short range Wireless Communications-Fundamentals of RF system design and Applications”, Elsevier Inc, 2004

2. Antti V. Raisanen, Arto Lehto, “Radio engineering for wireless communication and sensor applications”, Artech House, 2003

3. Rolf Kraemer and Marcos Katz, “Short-range wireless communications emerging technologies and applications”, Wiley WWRF series, March 2009

4. Shlomi Arnon, John Barry, George Karagiannidis, Robert Schober, Murat Uysal, “Advanced Optical Wireless Communication Systems” , Cambridge University Press, 2012

Learning Assessment

Bloom’s

Level of Thinking


CLA – 1 (10%) CLA – 2 (15%) CLA – 3 (15%) CLA – 4 (10%)#


Level 1 Remember

40 % - 30 % - 30 % - 30 % - 30% - Understand

Level 2 Apply

40 % - 40 % - 40 % - 40 % - 40% - Analyze

Level 3 Evaluate

20 % - 30 % - 30 % - 30 % - 30% - Create

Total 100 % 100 % 100 % 100 % 100 %


Course Designers


1. Mr. Anuj Kumar, Bombardier Transportation, Ahmedabad, [email protected] 1. Dr. Meenakshi, Professor of ECE, CEG, Anna University, [email protected] 1. Dr. J. Subhashini, SRM IST



Course Code 18EC0102J Course Name ELECTRONIC CIRCUITS AND SYSTEMS Course


L T P C

2 0 2 3

Pre-requisite Courses Nil Co-requisite Courses Nil Progressive

Courses Nil

Course Offering Department Electronics and Communication Engineering Data Book / Codes/ Standards


CLR-1 : Provide a basis for understanding semiconductor material, how a pn junction is formed and its principle of operation

1 2 3 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

CLR-2 : Describe the basic structure, operation and characteristics of transistors BJTs and FETs, and discuss their use as a switch and an amplifier

Leve

l of T

hink

ing

(Blo

om)

Exp

ecte

d P

rofic

ienc

y (%

)

Exp

ecte

d A

ttain

men

t (%

)

Eng

inee

ring

Kno

wle

dge

Pro

blem

Ana

lysi

s

Des

ign

& D

evel

opm

ent

Ana

lysi

s, D

esig

n, R

esea

rch

Mod

ern

Too

l Usa

ge

Soc

iety

& C

ultu

re

Env

ironm

ent &

Sus

tain

abili

ty

Eth

ics

Indi

vidu

al &

Tea

m W

ork

Com

mun

icat

ion

Pro

ject

Mgt

. & F

inan

ce

Life

Lon

g Le

arni

ng

PS

O–1

: Pro

fess

iona

l Ach

ieve

men

t

PS

O –

2: P

roje

ct M

anag

emen

t

Tec

hniq

ues

PS

O –

3: A

naly

ze &

Res

earc

h

CLR-3 : Learn the basics of op-amp: the principle, operation, characteristics and fundamentally important circuits

CLR-4 : Describe and analyze the basic operation of sinusoidal oscillators and use a 555 Timer in an oscillator application.

CLR-5 : Learn the fundamentals of analog and digital communication, networking, radio transmission and mobile telephones

CLR-6 : Encourage the learner to assemble and test real circuits in the laboratory


CLO-1 : Understand the operation, characteristics, parameters and specifications of semiconductor diodes and demonstrate its important applications

1 80 70 L L - - - - - - - - - - - - -

CLO-2 : Review the transistor (BJT & FET) construction, operation, characteristics and parameters, as well as its application in amplification and switching.

1 80 70

L L - - - - - - - - - - - - -

CLO-3 : Identify different configurations of op-amp analyze the parameters of op-amp and observe the frequency response of operational-amplifier.

1 80 70 L L - - - - - - - - - - - - -

CLO-4 : Understand & demonstrate different applications based on operational-amplifier and special linear ICs 1 80 70 L L - - - - - - - - - - - - -

CLO-5 : Understand the basic concepts and techniques of telecommunication systems and networks 1 80 70 L L - - - - - - - - - - - - -

CLO-6 : Understand how circuit behavior can be studied with a computer, using a circuit simulation software 2 90 80 - - H - H - - - - L - M L - -

Learning Unit / Module 1

(12) Learning Unit / Module 2




(12)

Duration (hour) Active Discrete Components &

Circuits – I Active Discrete Components &

Circuits – II Linear Integrated Circuits Oscillators and Timers Telecommunications

S-1 SLO-1 Conduction in semiconductors JFETs: Structure & Operation Introduction to Op-amp RC Phase-Shift oscillator Operation

Analog & Digital Communication: Stages in telecommunication systems

SLO-2 Conduction in diodes Characteristics & Parameters Basic op-amp and its characteristics & Design Carriers and Modulation

S-2 SLO-1 Basic operation of PN junction diode JFET Biasing (Voltage-Divider Biasing) op-amp modes Wein bridge Oscillator operation Carriers and Modulation SLO-2 VI Characteristics of diode CS-JFET Amplifier operation parameters & Design Pulse Modulation

S-3 SLO-1

Lab-1: VI Characteristics of PN Junction Diode

Lab-4: Design & Analysis of CE BJT Amplifier

Lab-7: Negative Feedback op-amp circuits

Lab-10: Analysis & Design of RC Oscillators

Lab-13: Demonstration of AM & FM SLO-2

S-4 SLO-1

SLO-2

S-5 SLO-1 Applications of diode: HWR & FWR MOSFETs: Structure

Op-amp circuits: Scale changer, adder, subtractor

LC oscillators operation: Hartley Oscillator

Pulse Modulation

SLO-2 Clippers & Clampers Operation HWR & FWR Colpitts Oscillator Digital Transmission, Frequency Division MultiplexingTime Division Multiplexing

S-6 SLO-1 Basic operation of Zener diode and its VI characteristics

Characteristics Clipper &Clamper 555 Timer IC: Basic Operation Networks: RS-232, circuit switching


SLO-2 Zener diode as a voltage regulator Parameters Log & Antilog amplifiers Astable Operation Message switching, TCP/IP

S-7 SLO-1

Lab-2: VI Characteristics of Zener Diode

Lab-5: Design & Analysis of CS-JFET Amplifier

Lab-8: Op-amp Circuits-I Lab-11: 555 Timer Operation & Applications

Lab-14: Demonstration of Pulse Modulation

SLO-2

S-8 SLO-1

SLO-2

S-9 SLO-1 BJTs: Structure & Operation MOSFET as an amplifier Instrumentation amplifier Monostable Operation Radio Transmission: Electromagnetic Spectrum, ground waves, sky waves

SLO-2 Characteristics & Parameters MOSFET as a switch Comparator Applications of 555 Timer antennas, directional transmissions,

S-10 SLO-1 CE BJT amplifier operation MOSFET Biasing (Voltage-Divider Biasing)

Comparator applications Applications of 555 Timer Transmitters, Receivers

SLO-2 Differential amplifier operation CS-MOSFET amplifier operation Schmitt trigger Voltage-Controlled Oscillators Mobile telephones

S-11 SLO-1

Lab-3: Applications of PN Junction diode and Zener diode

Lab-6: Design & Analysis of CS-MOSFET Amplifier

Lab-9: Op-amp Circuits-II Lab-12: VCO Operation Mini Project / Model Practical Examination

SLO-2

S-12 SLO-1

SLO-2

Learning Resources

1. Owen Bishop, “Electronic Circuits and Systems”, 4th edition, Elsevier, 2011.

2. Harry Kybett, Earl Boysen, “All New Electronics”, 3rd edition, Wiley, 2008.

3. Paul Scherz, “Practical Electronics for Inventors”, McGraw-Hill, 2000.

Learning Assessment

Bloom’s

Level of Thinking



Level 1 Remember

20% 20% 15% 15% 15% 15% 15% 15% 15% 15% Understand

Level 2 Apply

20% 20% 20% 20% 20% 20% 20% 20% 20% 20% Analyze

Level 3 Evaluate

10% 10% 15% 15% 15% 15% 15% 15% 15% 15% Create

Total 100 % 100 % 100 % 100 % -


Course Designers


1. Mr. Anuj Kumar, Bombardier Transportation, Ahmedabad, [email protected] 1. Dr. Meenakshi, Professor of ECE, CEG, Anna University, [email protected] 1. Mr. Manikandan AVM, SRM IST

2. Mr. Hariharasudhan - Johnson Controls, Pune, [email protected] 2. Dr. Venkatesan, Sr. Scientist, NIOT, Chennai, [email protected] 2. Dr. Rajesh Agarwal, SRM IST


Course Code

18ECO103T Course Name

MODERN WIRELESS COMMUNICATION SYSTEM Course


L T P C

3 0 0 3


Nil Co-requisite

Courses Nil

Progressive Courses

Nil



CLR-1 : Learn to analyze the transmission of various wireless communication systems 1 2 3 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 CLR-2 : Understand the fundamentals of various networks in wireless communication

Leve

l of T

hink

ing

(Blo

om)

Exp

ecte

d P

rofic

ienc

y (%

)

Exp

ecte

d A

ttain

men

t (%

)

Eng

inee

ring

Kno

wle

dge

Pro

blem

Ana

lysi

s

Des

ign

& D

evel

opm

ent

Ana

lysi

s, D

esig

n, R

esea

rch

Mod

ern

Too

l Usa

ge

Soc

iety

& C

ultu

re

Env

ironm

ent &

Sus

tain

abili

ty

Eth

ics

Indi

vidu

al &

Tea

m W

ork

Com

mun

icat

ion

Pro

ject

Mgt

. & F

inan

ce

Life

Lon

g Le

arni

ng

PS

O–1

: Pro

fess

iona

l

Ach

ieve

men

t P

SO

– 2

: Pro

ject

Man

agem

ent

Tec

hniq

ues

PS

O –

3: A

naly

ze &

Res

earc

h

CLR-3 : Understand the techniques involved in personal communication services.

CLR-4 : Introduce various wireless systems for 3G and future communication

CLR-5 : Learn to analyze wireless networks for short range communication

CLR-6 : Understand the Fundamentals, Techniques and Networks of Wireless Communication Systems


CLO-1 : Discuss the fundamentals of transmission in wireless systems 2,3 80 75 - - - H - - - - - - - - H

CLO-2 : Provide an overview of various approaches to communication networks 2,3 80 85 - - - H - - - - - - - - - - H

CLO-3 : Study the numerous different-generation technologies with their individual pros and cons 2,3 85 85 - - - H - - - - - - - - M - H

CLO-4 : Discuss about the principles of operation of the different access technologies like FDMA, TDMA, SDMA and CDMA and their pros and cons.

2,3 85 80 - - - H - - - - - - - - M - H

CLO-5 : Learn about the various mobile data services and short range networks. 2,3 85 80 - - - - - - - - - - - - - - H

CLO-6 : Gain knowledge on Fundamentals, Techniques and Networks of Wireless Communication Systems 2,3 85 80 - - - - - - - - - - - - H - -

Duration (hour)

Transmission Fundamentals Network Concepts Personal Communication Services 3G and Beyond Mobile Data Services and Short- Range

Network

9 9 9 9 9

S-1 SLO-1 Cellphone Generations Communication Networks

Personal communication Introduction, HSCSD, GPRS, D-AMPS, CDMA One, CDMA Two, Packet Data Systems

3G Introduction

Mobile Data Services Introduction Messaging, wireless web, WAP, site design Short-Range Wireless Networks: Unlicensed spectrum, WLANs, cordless telephony, IrDA, Bluetooth Smart Phones: Future phones, mobile OSs, smart phone applications.

SLO-2 1G and 2G LANs GSM IMT-2000 Introduction Data Services

S-2 SLO-1 2.5G MANs GSM IMT-2000 Messaging

SLO-2 3G WANs HSCSD IMT-2000 Wireless web

S-3 SLO-1 4G Transmission Introduction Circuit switching HSCSD W-CDMA Introduction WAP

SLO-2 4G Transmission Fundamentals Packet switching GPRS W-CDMA Site design

S-4 SLO-1 Time domain concepts ATM Cellular Networks Introduction GPRS CDMA 2000 Introduction Short-Range Wireless Networks


SLO-2 Frequency domain concepts Cells D-AMPS EDGE Unlicensed spectrum

S 5-6

SLO-1 Radio Media Duplexing D-AMPS EDGE WLANs

SLO-2

S-7 SLO-1 Analog Vs Digital Multiplexing CDMA Introduction Wi-Fi Introduction Cordless telephony

SLO-2 Channel capacity Voice coding CDMA One Wi-Fi IrDA

S-8 SLO-1 Transmission media Multiple Access Techniques: FDMA CDMA One WiMAX Introduction Bluetooth Smart Phones

SLO-2 Signaling Schemes TDMA, SDMA CDMA Two WiMAX Future phones

S-9 SLO-1 Carrier-based signaling, CDMA CDMA Two

OFDM

Mobile OSs

SLO-2 Spread-spectrum signaling Spectral efficiency Packet Data Systems MIMO Smart phone applications

Learning Resources

1. Simon Haykin, David Koilpillai, Michael Moher,” Modern Wireless Communication”, 1/e, Pearson Education, 2011

2. Rappaport T.S, “Wireless Communications: Principles and Practice”, 2nd edition, Pearson education.

3. Andrea Goldsmith, “Wireless Communications”, Cambridge University Press, Aug. 2005. 4. Andy Dornan, “The essential guide to wireless communications applications: from cellular

systems to Wi-Fi”, 2nd Edition, Prentice Hall, 2002

5. Ian F.Akyildiz, David M. Gutierrez Estevez, and Elias Chavarria Reyes, “ The evolution of 4G cellular systems: LTE advanced”, Physical communication, Volume 3, No. 4, pp. 217-298, Dec. 2010

6. William Stallings, “ Wireless Communication & Networking”, Pearson Education Asia, 2004 7. Andrea .F.Molisch, “Wireless communications”, 2nd edition, Wiley Publications.

Learning Assessment

Bloom’s

Level of Thinking



Level 1 Remember

30 % - 30 % - 30 % - 30 % - 30% - Understand

Level 2 Apply

40 % - 40 % - 40 % - 40 % - 40% - Analyze

Level 3 Evaluate

30 % - 30 % - 30 % - 30 % - 30% - Create

Total 100 % 100 % 100 % 100 % 100 %


Course Designers


1. Mr. Anuj Kumar, Bombardier Transportation, Ahmedabad, [email protected] 1. Dr. Meenakshi, Professor of ECE, CEG, Anna University, [email protected] 1. Dr. Sabitha Gauni, SRMIST



Course Code 18ECO104J Course Name AUDIO AND SPEECH SIGNAL PROCESSING Course


L T P C

2 0 2 3


Nil Co-requisite

Courses Nil

Progressive Courses

Nil



CLR-1 : To explore about Speech signal processing 1 2 3 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

CLR-2 : To explore about the human auditory system

Leve

l of T

hink

ing

(Blo

om)

Exp

ecte

d P

rofic

ienc

y

(%)

Exp

ecte

d A

ttain

men

t (%

)

Eng

inee

ring

Kno

wle

dge

Pro

blem

Ana

lysi

s

Des

ign

& D

evel

opm

ent

Ana

lysi

s, D

esig

n,

Res

earc

h

Mod

ern

Too

l Usa

ge

Soc

iety

& C

ultu

re

Env

ironm

ent &

Sus

tain

abili

ty

Eth

ics

Indi

vidu

al &

Tea

m W

ork

Com

mun

icat

ion

Pro

ject

Mgt

. & F

inan

ce

Life

Lon

g Le

arni

ng

PS

O –

1: P

rofe

ssio

nal

Ach

ieve

men

t

PS

O –

2: P

roje

ct

Man

agem

ent T

echn

ique

s

PS

O –

3: A

naly

ze

&R

esea

rch

CLR-3 : Feature Extraction of Speech signal using Time characteristics

CLR-4 : Frequency characteristics of Speech signal CLR-5 : Provide a foundation for developing applications in this field.

CLR-6 : Understand the concept of speech processing both in time and frequency domain


CLO-1 : Understand the functioning of the human vocal and auditory systems in terms of signal processing 1 90 68 H H H - - - - M H

CLO-2 : Analyze the function of feature extraction in speech and audio signal processing using Time Domain Characteristics

2 85 67 H H M - - - - M H

CLO-3 : Understand the frequency characteristics of speech signal 2 85 68 H H M M - - - - H H

CLO-4 : Understand the Digital models for speech signal 1&2 85 65 H H H - - - - H M

CLO-5 : Understand the elements of music 2&3 85 66 H H H - - - - H H CLO-6: Understand Speech signal processing in time and frequency domain and their models. 1,2,3 85 68 H H M H - - - - M M

Duration (hour)


Basic Audio Processing Learning Unit / Module 2 Human auditory system


Speech Signal Analysis in Time Domain


Speech Signal Analysis in Frequency Domain


Speech and Audio processing applications

12 12 12 12 12

S-1 SLO-1 Introduction to Digital audio Human auditory system Speech signal analysis Short Time Fourier analysis Introduction to Speech recognition

SLO-2 Capturing and converting sound Human auditory system Speech signal analysis Short Time Fourier analysis Introduction to Speech recognition

S-2 SLO-1 Sampling of sound wave simplified model of cochlea Segmental, sub-segmental levels Filter bank analysis

Complete system for an isolated word recognition with vector quantization /DTW

SLO-2 Handling audio in MATLAB simplified model of cochlea Suprasegmental levels Formant extraction and Pitch extraction Complete system for an isolated word recognition with vector quantization /DTW

S-3 SLO-1

Lab 1: Read & write a speech signal, Record a speech signal, playback, convert into a wave file, plot the speech signal, and spectrogram plot.

Lab 4: Short-term energy of a speech signal

Lab 7: Estimation of pitch period using simplified inverse filter tracking (SIFT) algorithm

Lab 10: Phoneme-level segmentation of speech

Lab 13: Compute pitch period and fundamental frequency for speech signal

SLO-2

S-4 SLO-1

SLO-2

S-5 SLO-1 Normalization Sound pressure level and loudness Time domain parameters of speech signal Homomorphic speech analysis

Complete system for speaker identification, verification

SLO-2 Audio processing Sound pressure level and loudness Time domain parameters of speech signal Cepstral analysis of Speech Introduction to speech enhancement

S-6 SLO-1 Segmentation Sound intensity and Decibel sound levels

Methods for extracting the parameters Energy

Formant and Pitch Estimation Introduction to speech enhancement

SLO-2 Analysis of window sizing Sound intensity and Decibel sound levels Average ,Magnitude Linear Predictive analysis of speech Speech enhancement using spectral subtraction method


S-7 SLO-1

Lab 2: Convert into a wave file, plot the speech signal, and spectrogram plot

Lab 5: Short-time Fourier transform magnitude spectrum

Lab 8: Estimation of pitch period using harmonic product spectrum

Lab 11:To study the quantization and aliasing effect of speech signal

Lab 14: Short term speech analysis SLO-2

S-8 SLO-1

SLO-2

S-9 SLO-1 Visualization Concept of critical band Zero crossing Rate

Autocorrelation method, Covariance method

Introduction to Text to speech conversion

SLO-2 Sound generation Uniform filter bank , Non- uniform filter bank

Silence Discrimination using ZCR and energy

Solution of LPC equations Introduction to Musical instrument classification

S-10 SLO-1

Speech production mechanism, Charistics of speech

Mel scale and bark scale, Short Time Auto Correlation Function Durbin’s Recursive algorithm, Application of LPC parameters

Musical Information retrieval.

SLO-2 Understanding of speech Speech perception: vowel perception Pitch period estimation using Auto Correlation Function

Pitch detection using LPC parameters, Formant analysis

Sample Programs

S-11 SLO-1

Lab 3:Cepstrum smoothed magnitude spectrum

Lab 6: (i)Linear prediction magnitude spectrum, (ii) (ii) Estimation of formant frequencies using linear prediction

Lab 9: Pitch and duration modification using time-domain pitch synchronous overlap and add (TD-PSOLA) method

Lab 12:: Speech signal to symbol transformation using wavesurfer

Lab 15: Study of Praat SLO-2

S-12 SLO-1

SLO-2

Learning Resources

1. Ian McLaughlin, “Applied Speech and Audio processing, with MATLAB examples”, 1st Edition, Cambridge University Press, 2009

2. Ben Gold, Nelson Morgan, Dan Ellis, Wiley, “Speech and Audio Signal Processing: Processing and Perception of Speech and Music”, 2nd Edition, John Wiley & Sons, 01-Nov-2011.

3. Rabiner,B.H.Juang, “Fundamentals of Speech Recognition”, 2 nd Edition, Prentice-hall Signal Processing Series, April 1993

4. Ken Pohlmann, “Principles of Digital Audio”, 6th Edition, McGraw-Hill, 2007 5. A.R.Jayan, “Speech and Audio Signal Processing”, ISBN : 978-81-203-5256-8, PHI Learning Pvt. Ltd, 2016.

Learning Assessment

Bloom’sLevel of

Thinking



Level 1 Remember

20% 20% 15% 15% 15% 15% 15% 15% 15% 15% Understand

Level 2 Apply

20% 20% 20% 20% 20% 20% 20% 20% 20% 20% Analyze

Level 3 Evaluate

10% 10% 15% 15% 15% 15% 15% 15% 15% 15% Create

Total 100 % 100 % 100 % 100 % 100 %



1. Mr. Anuj Kumar, Bombardier Transportation, Ahmedabad, [email protected] 1. Dr. Meenakshi, Professor of ECE, CEG, Anna University, [email protected] 1. Dr. S. Dhanalakshmi, SRMIST

2. Mr. Hariharasudhan - Johnson Controls, Pune, [email protected] 2. Dr. Venkatesan, Sr. Scientist, NIOT, Chennai, [email protected] 2. Mrs. K. Harisudha, SRMIST


Course Code 18ECO105T Course Name

UNDERWATER ACOUSTICS Course

Category

O

Open Elective

L T P C

3 0 0 3

Pre-requisite

Courses Nil

Co-requisite Courses

Nil Progressive

Courses Nil



CLR-1 : Understand what is Sound Navigation and Ranging (SONAR) and how it can be used in underwater applications. 1 2 3 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

CLR-2 : Study about Ocean Acoustic Processing and sound wave propagation and analyze sea floor characteristics and ocean sounds.

Leve

l of T

hink

ing

(Blo

om)

Exp

ecte

d P

rofic

ienc

y (%

)

Exp

ecte

d A

ttain

men

t (%

)

Eng

inee

ring

Kno

wle

dge

Pro

blem

Ana

lysi

s

Des

ign

& D

evel

opm

ent

Ana

lysi

s, D

esig

n, R

esea

rch

Mod

ern

Too

l Usa

ge

Soc

iety

& C

ultu

re

Env

ironm

ent &

Sus

tain

abili

ty

Eth

ics

Indi

vidu

al &

Tea

m W

ork

Com

mun

icat

ion

Pro

ject

Mgt

. & F

inan

ce

Life

Lon

g Le

arni

ng

PS

O–1

: Pro

fess

iona

l Ach

ieve

men

t

PS

O –

2: P

roje

ct M

anag

emen

t T

echn

ique

s

PS

O –

3: A

naly

ze &

Res

earc

h

CLR-3 : Understand about Underwater reverberation and how types of noises affects the underwater acoustics signal data analysis.

CLR-4 : Study about Acoustic transducers.

CLR-5 : Know which transducers can be used for underwater applications.

CLR-6 : Understand the basic theory and signal processing application for underwater communication and navigation.


CLO-1 : Acquire in-depth knowledge and analyze on Sound Navigation and Ranging (SONAR) equations and it characteristics. L1 85 65 M - - - - - - - - - - M L

CLO-2 : Analyze Ocean Acoustic Processing and sound wave propagation. L2 85 65 M H H H H - - - - - - L H H H

CLO-3 : Acquire knowledge and analyze Underwater reverberation and various types of noises. L1&L2 85 65 M H H H - - - - - - L H M H

CLO-4 : Acquire knowledge on working of underwater Acoustic transducers. L1 85 65 H H H H H - - - - - - L H H H

CLO-5 : Gain knowledge and apply SONAR concepts for underwater applications. L1& L3 85 65 L H H - - - - - - - L H M H

CLO-6 : Understand the development and dynamics of underwater acoustic engineering L2 &L3 85 65 - - - - - - - - - - - - - - -

Duration (hour)

Learning Unit / Module 1 Sound Navigation and Ranging

(SONAR)

Learning Unit / Module 2 Ocean Acoustic Processing and sound

wave propagation

Learning Unit / Module 3 Reverberation and Noises

Learning Unit / Module 4 Acoustic Transduction

Learning Unit / Module 5 SONAR Application

9 9 9 9 9

S-1 SLO-1 Introduction to SONAR equation, Processing ocean sound-Sampling rules

Reverberation-Scattering, back scattering strength and target strength

Piezoelectric transducer-Introduction Echo sounder

SLO-2 Source Intensity, Source Directivity Spatial sampling and Temporal sampling Surface and bottom scattering Piezoelectric transducer-33-Mode longitudinal vibrator

Echo Sounder

S-2

SLO-1 Transmission loss Filter operations-Finite Fourier transformation Volume scattering, bottom scattering, reverberation target strength

Piezoelectric transducer-33-Mode longitudinal vibrator

Sub-bottom profiling

SLO-2 Transmission loss Filter operations-Time domain view of Band pass filtering. convolution operations, frequency domain

Calculation of reverberation for use in the sonar equation, Volume reverberation level

Electrostrictive transducers Fishing sonars

S-3 SLO-1 Target Strength

Gated Signals-Dependence of Spectrum on ping carrier periodicity

Reverberation frequency spread and Doppler gain potential-Power spectral density of a CW pulse

Electrostrictive transducers Side scan terrain mapping sonar

SLO-2 Reflection Intensity Loss Coefficient Power spectra of random signal-Signal having random characteristics, Spectral density,

Environmental frequency sampling Magnetostrictive transducers Side scan terrain mapping sonar

S-4

SLO-1 Sea-floor Loss, Radom signal simulations-Intensity spectral density, Spectral smoothing

Frequency spreading due to transmitter and receiver motion

Magnetostrictive transducers Acoustic positioning and navigation

SLO-2 Sea-surface Loss Matched filters and autocorrelation Frequency spreading due to target, important observation with respect to reverberation

Electostatic Transducers Acoustic positioning and navigation


S-5

SLO-1 Noise, Reverberation Sounds in the oceans-natural physical sounds and biological sounds

Noise-Ambient noise models Electostatic Transducers 3D Imaging Processing-data model

SLO-2 Active and Passive Sonar Equations Sound propagation in the ocean and underwater acoustic channel-Sound wave and vibration, velocity of sound

Ambient noise-seismic noise, ocean turbulence, shipping noise

Variable Reluctance Transducers 3D Imaging Processing-acquisition of 3D information

S-6

SLO-1 Passive Sonar Equations, Signal-to-Noise Ratio

Sound propagation in the ocean and underwater acoustic channel-Sound wave velocity of sound

Wave noise, thermal noise Variable Reluctance Transducers 3D Imaging Processing-matrix approach and real time systems

SLO-2 Signal Excess, Figure of Merit Wave and ray theories of underwater sound fields

Rain noise, temporal variability of ambient noise, depth effects of noise

Moving coil transducers 3D Imaging Processing-Image representation, Acoustic image processing

S-7

SLO-1 Active SONAR target strength Wave and ray theories of underwater sound fields

Under ice noise Moving coil transducers 3D Imaging Processing-Segmentation and reconstruction of underwater tubular structures

SLO-2 Active SONAR- reverberation, detection threshold

Wave and ray theories of underwater sound fields

Spatial coherence of ambient noise Equivalent circuits-Basics Circuit Resonance

3D Imaging Processing-Segmentation and reconstruction of underwater tubular structures

S-8 SLO-1

Active Sonar Sources- Source Level, Cavitation

Sound absorption in sea water and its characteristics

Self-noise-Flow noise Circuit Q and Bandwidth Acoustic communication-Cross attributes of the received signal

SLO-2 Near-Field Interactions Explosive Sources

Upper boundary of acoustic channel Self-noise – Flow noise Transducers as projectors-principle Acoustic communication-channel transfer function

S-9 SLO-1

Physics of Shock Waves in Wate, Bubble Pulses

Lower boundary of acoustic channel and its characteristics

Self noise-turbulent noise coherence Transducers as Hydrophones-principles of operations

Acoustic communication-combating multipath

SLO-2 Pros and Cons of Explosive Charges, Parametric Acoustic Sources

sound field in shallow water Self noise-strumming noise Transducers as Hydrophones-simplified equivalent circuit

Acoustic communication-diversity reception, equalization

Learning Resources

1. Richard P HODGES, “Underwater Acoustics – Analysis, Design and Performance of SONAR”, Wiley 1 edition2010, ISBN 978-0-470-68875-

2. Rodney F W Coates, “Underwater Acoustics Systems”, Macmillan New Electronics,Wiley, 1stedition , 1990, ISBN 978-0-333-42542-8

3. Robert S H Istepanian and MilicaStojanovic, “Underwater Acoustic Digital Signal Processing and Communication Systems”, Springer, 2002 edition, ISBN 978-1-4419-4882-3

4. Charles H Sherman, John L Butler, “Transducers and Arrays for Underwater Sound”, Springer; 2nd edition, 2016, ISBN-10: 0-387-32940-4 ISBN-13: 978-0387-32940-6

5. Qihu Li, “Digital Sonar Design in underwater acoustics: Principles and applications”, Springer, Zhejang University Press, 2012

6. Herman Medwin, Clarence S.Clay, “Fundamentals of Acoustical Oceanography”, Academic Press, 1998.

Learning Assessment

Bloom’s

Level of Thinking


CLA – 1 (10%) CLA – 2 (15%) CLA – 3 (15%) CLA – 4 (10%)#


Level 1 Remember

40 % - 30 % - 30 % - 30 % - 30% - Understand

Level 2 Apply

40 % - 40 % - 40 % - 40 % - 40% - Analyze

Level 3 Evaluate

20 % - 30 % - 30 % - 30 % - 30% - Create


Course Designers


1. Mr. Anuj Kumar, Bombardier Transportation, Ahmedabad, [email protected] 1. Dr. Meenakshi, Professor of ECE, CEG, Anna University, [email protected] 1. Dr. S. Dhanalakshmi, SRMIST



Course Code 18ECO106J Course Name PCB DESIGN AND MANUFACTURING Course


L T P C

2 0 2 3

Pre-requisite Courses Nil Co-requisite Courses Nil Progressive

Courses Nil

Course Offering Department Electronics and Communication Engineering Data Book / Codes/ Standards


CLR-1 : Explore the terminologies of PCB design and Electronic components. 1 2 3 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 CLR-2 : Understand the design and other consideration involved in PCB design

Leve

l of T

hink

ing

(Blo

om)

Exp

ecte

d P

rofic

ienc

y (%

)

Exp

ecte

d A

ttain

men

t (%

)

Eng

inee

ring

Kno

wle

dge

Pro

blem

Ana

lysi

s

Des

ign

& D

evel

opm

ent

Ana

lysi

s, D

esig

n,

Res

earc

h

Mod

ern

Too

l Usa

ge

Soc

iety

& C

ultu

re

Env

ironm

ent &

Sus

tain

abili

ty

Eth

ics

Indi

vidu

al &

Tea

m W

ork

Com

mun

icat

ion

Pro

ject

Mgt

. & F

inan

ce

Life

Lon

g Le

arni

ng

PS

O–1

: Pro

fess

iona

l

Ach

ieve

men

t

PS

O –

2: P

roje

ct

Man

agem

ent T

echn

ique

s

PS

O –

3: A

naly

ze &

R

esea

rch

CLR-3 : Understand the PCB design consideration for special application circuits

CLR-4 : Design a PCB layout using CAD tool

CLR-5 : Explore various PCB manufacturing techniques

CLR-6 :


CLO-1 : Identify the various types of PCB and electronics components packaging 1 80 70 H L

CLO-2 : Select suitable design and consider appropriate parameters involved in PCB design 1,2 80 70 M L

CLO-3 : Apply the appropriate design rules in designing PCB for special application circuits 1,2 80 70 M L CLO-4 : Design and develop a PCB layout using CAD tool 1,2, 3 80 70 M M H

CLO-5 : Identify and select the required PCB manufacturing technology 1,2, 3 80 70 L H

CLO-6 :

Learning Unit / Module 1 Learning Unit / Module 2 Learning Unit / Module 3 Learning Unit / Module 4 Learning Unit / Module 5


S-1 SLO-1 Nomenclature of a Printed Circuit Board

PCB Design Considerations - Important Design Elements

Design Rules for Analog Circuits Schematic Capture - Introduction schematic capture tool

Image Transfer Techniques- Screen Printing, Pattern Transferring Techniques

SLO-2 Classification of Printed Circuit Boards PCB Design Considerations - Important Performance Parameters

S-2

SLO-1 Manufacturing of basic PCB - Single-and Double-sided Plated Through-holes

PCB Design Considerations - Mechanical Design Considerations

Design Rules for Digital Circuits

Schematic Capture - Simulation of simple electronic circuit

Image Transfer Techniques- Printing Inks, Photo Printing, Laser Direct Imaging (LDI)

SLO-2

Manufacturing of Multi-layer Boards - Flexible Boards, Challenges in modern PCB Design and Manufacture, PCB Standards

PCB Design Considerations - Mechanical Design Considerations

Schematic Capture - Schematic to layout transfer

Copper Clad Laminates - Properties of Laminates, Types of Laminates, Evaluation of Laminates

S-3 SLO-1

Study of electronic components- Passive electronic components

Design and analysis of RL and RC time constants. Schematic in CAD tool

Schematic and PCB Layout in CAD tool. Regulated power supply design.- Full wave rectifier circuit design with fixed voltage regulator

PCB Layout Design of single digit pulse counter using PCB design tool.

Mini Project - PCB Layout Design of electronic turn ON/OFF timer using IC555 using PCB design tool.

SLO-2

S-4 SLO-1

SLO-2

S-5 SLO-1

Types, Symbols, Packaging shapes and terminal details of Electronic Components –Resistors, Thermistors Capacitors, Inductors

PCB Design Considerations - Electrical Design Considerations

Design Rules for High Frequency Circuits PCB Layout Design - Conception Level Introduction

Etching Techniques – wet Etching chemicals

SLO-2 Diodes, Light Emitting Diodes (LED), Photodiode,

PCB Design Considerations - Conductor Patterns, Component Placement Rules

Design Rules for Fast Pulse Circuits PCB Layout Design - Specifying Parts, Packages and Pin Names, Libraries

Etching Techniques - Mechanical Etching

S-6 SLO-1 Transistors, Field-effect Transistors, Insulated Gate Bipolar Transistor (IGBT), Thyristor

Fabrication and Assembly Considerations Design Rules for Microwave Circuits PCB Layout Design - Checking foot prints of the components, Part list, Net list, Making Net list Files

PCB Assembly Process - Through-hole

S-7 SLO-1 Design and analysis of RLC circuits. Schematic in CAD tool

Schematic and PCB Layout in CAD tool. Mini Project - Manufacture the PCB for electronic turn ON/OFF timer using SLO-2


S-8 SLO-1 Study of electronic components- active devices, analog and digital integrated circuits (IC)

Regulated power supply design. -Full wave rectifier circuit design with fixed voltage regulator

PCB Design of single digit pulse counter: Schematic and PCB layout using PCB design tool.

IC555and construct and test the designed circuit.

SLO-2

S-9 SLO-1 Digital Integrated Circuits, Random Access Memory

Environmental Factors, Cooling Requirements

Design Rules for High-density Interconnection Structures

PCB Layout Design - Mounting Holes, Adding Text, PCB Layout

PCB Assembly Process - Surface Mount, Mixed Technologies

SLO-2 Read Only Memory Packaging Density

S-10 SLO-1 Microcontrollers, Surface Mount Devices Layout Design

Electromagnetic Interference/Compatibility (EMI/EMC)

PCB Layout Design - DRC, Pattern Transfer, Layout printing

PCB Assembly Process - Soldering SLO-2 Transformer, Relays, Connectors

S-11 SLO-1 Study of testing and measuring Instruments: Logic analyzer, spectrum analyzer, IC tester (Analog and Digital), LCR meters

PCB Layout Design - of RL, RC and RLC circuits

Schematic and PCB Layout in CAD tool. Regulated power supply design. Full wave rectifier circuit design with fixed voltage regulator

Mini Project - PCB Layout Design of electronic turn ON/OFF timer using IC555 using PCB design tool.

Mini Project - Manufacture the PCB for electronic turn ON/OFF timer using IC555and construct and test the designed circuit.

SLO-2

S-12 SLO-1

SLO-2

Learning Resources

1. Raghbir Singh Khandpur, “Printed Circuit Boards: Design, Fabrication, and Assembly” McGraw-

Hill Electronic Engineering, 2006.

2. Charles A. Harpe, “High Performance Printed Circuit Boards”, McGraw Hill Professional, 2000.

3. Bruce R. Archambeault, James Drewniak, “PCB Design for Real-World EMI Control”, Volume 696 of

The Springer International Series in Engineering and Computer Science, Springer Science & Business

Media, 2013.

4. Kraig Mitzner, “Complete PCB Design Using OrCAD Capture and PCB Editor”, Newnes/Elsevier, 2009.

5. Douglas Brooks “Signal Integrity Issues and Printed Circuit Board Design”, Prentice Hall PTR, 2003.

6. Mark I. Montrose “Printed Circuit Board Design Techniques for EMC Compliance : A handbook for

designers” Wiley, 2 Edition, 2015.

7. Esim open source tool : http://esim.fossee.in/ 8. TINA/Orcad User manual

Learning Assessment

Bloom’s

Level of Thinking



Level 1 Remember

20% 20% 15% 15% 15% 15% 15% 15% 15% 15% Understand

Level 2 Apply

20% 20% 20% 20% 20% 20% 20% 20% 20% 20% Analyze

Level 3 Evaluate

10% 10% 15% 15% 15% 15% 15% 15% 15% 15% Create

Total 100 % 100 % 100 % 100 % -


Course Designers


1. Mr. Anuj Kumar, Bombardier Transportation, Ahmedabad, [email protected] 1. Dr. Meenakshi, Professor of ECE, CEG, Anna University, [email protected] 1. Dr. P. Eswaran, SRM IST



Course Code


FIBER OPTICS AND OPTOELECTRONICS Course


L T P C

3 0 0 3


Nil Co-requisite

Courses Nil

Progressive Courses

Nil



CLR-1 : Analyze the basic laws and theorems of light associated with the optical fiber communication and the classification of optical fibers

1 2 3 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

CLR-2 : Address concepts related to transmission characteristics such as attenuation and dispersion.

Leve

l of T

hink

ing

(Blo

om)

Exp

ecte

d P

rofic

ienc

y (%

)

Exp

ecte

d A

ttain

men

t (%

)

Eng

inee

ring

Kno

wle

dge

Pro

blem

Ana

lysi

s

Des

ign

& D

evel

opm

ent

Ana

lysi

s, D

esig

n, R

esea

rch

Mod

ern

Too

l Usa

ge

Soc

iety

& C

ultu

re

Env

ironm

ent &

Sus

tain

abili

ty

Eth

ics

Indi

vidu

al &

Tea

m W

ork

Com

mun

icat

ion

Pro

ject

Mgt

. & F

inan

ce

Life

Lon

g Le

arni

ng

PS

O–1

: Pro

fess

iona

l

Ach

ieve

men

t P

SO

– 2

: Pro

ject

Man

agem

ent

Tec

hniq

ues

PS

O –

3: A

naly

ze &

Res

earc

h

CLR-3 : Explore the fundamentals of optoelectronics display devices, Sources and Detectors

CLR-4 : Gain to information on Optical modulators and amplifiers

CLR-5 : Illustrate the integration methods available for optoelectronic circuits and devices CLR-6 : Utilize the basic optical concepts applied in various engineering problems and identify appropriate solutions


CLO-1 : Review the basic theorems related to fiber optic communication, and attain knowledge of types of optical fibers 2 80 70 H H - - - - - - - - - - - H

CLO-2 : Understand the optical signal distortion factors in optical fiber communication 2 85 75 H - M - - - - - - - - - - - M

CLO-3 : Familiarize the principle and operation of various display devices, light sources and detectors 2 75 70 H M M - - - - - - - - - - - L

CLO-4 : Acquire knowledge of various optoelectronic modulators and amplifiers 2 85 80 H - M - - - - - - - - - - - H CLO-5 : Understand the various optoelectronic integrated circuits 2 85 75 H - M L - - - - - - - - - - L

CLO-6: Acquire fundamental concepts related to optical communication and optoelectronic devices 2 80 75 H M M L - - - - - - - - - - H

Duration (hour)


Introduction to Optical Fibers


Transmission Characteristics of Optical Fibers


Display Devices, Light Sources and Detection Devices


Optoelectronic Modulators and Switching Devices


Optoelectronic Integrated Circuits

9 9 9 9 9

S-1

SLO-1 Evolution of fiber optic system Attenuation – Absorption, Attenuation units Display devices – Photo luminescence Analog and Digital Modulation Optoelectronic integrated circuits - Introduction

SLO-2 Elements of an optical fiber transmission link

Attenuation – Scattering losses Cathode luminescence Electro optic modulators – Electro optic effect – Longitudinal electro optic modulator

Need for Integration - Hybrid and Monolithic Integration

S-2 SLO-1

Elements of an optical fiber transmission link

Attenuation – Bending losses, microbending and macro bending losses

Electro luminescence Electro optic modulators – Transverse electro optic modulator

Hybrid and Monolithic Integration

SLO-2 Advantages of fiber optic system Attenuation - Core cladding losses Injection luminescence Acousto optic modulators – Transmission type – Raman Nath modulator

Materials and processing of OEICs

S-3 SLO-1 Characteristics and behavior of light Signal distortion in optical waveguides Light source materials

Acousto optic modulators – Reflection type – Bragg modulator

Application of optoelectronic integrated circuits

SLO-2 Total internal reflection Types of dispersion-Intramodal and Intermodal dispersion

Surface emitting LEDs Solving Problems Slab and Strip Waveguides

S-4

SLO-1 Acceptance angle Material dispersion Edge emitting LEDs Optical switching and logic devices – self-electro-optic-device

Integrated transmitters and receivers – Front end photo receivers

SLO-2 Numerical aperture, Critical angle Material dispersion, Waveguide dispersion Quantum efficiency and LED power – Internal quantum efficiency derivation

Optical switching and logic devices – Bipolar controller modulator

Integrated transmitters and receivers – photoreceiver noise and bandwidth considerations


S-5

SLO-1 Solving Problems Waveguide dispersion Quantum efficiency and LED power – External quantum efficiency and total LED power

Optical switching and logic devices- tunable threshold logic gate – Switching speed and energy.

Integrated transmitters and receivers – PIN-HBT photoreceivers

SLO-2

Solving Problems Signal distortion in single mode fibers Solving Problems Optical Amplifiers – General applications of optical amplifiers

Integrated transmitters and receivers – OEIC transmitters – equivalent circuit for integrated receivers

S-6 SLO-1 Ray optics Polarization mode dispersion Semiconductor laser diode

Semiconductor optical amplifiers – Basic configuration

Integrated transmitters and receivers – Complex circuits and arrays

SLO-2 Types of rays Polarization mode dispersion, Intermodal dispersion

Modes and threshold condition Semiconductor optical amplifiers – Optical gain - Limitations

Integrated transmitters and receivers - optical control and microwave oscillators

S-7 SLO-1 Optical fiber modes Intermodal dispersion Photo detection principle

Erbium doped fiber amplifiers – energy level diagram and amplification mechanism

Guided wave devices – Waveguide and couplers

SLO-2 Optical fiber configurations Solving Problems PIN Photodiode Erbium doped fiber amplifiers – EDFA configuration

Guided wave devices – Active guided wave devices

S-8 SLO-1 Single mode fibers Solving Problems PIN photodiode - Avalanche Photodiode Solving Problems

Guided wave devices – Mach Zehnder Interferometers

SLO-2 Multimode Fibers Pulse Broadening in Graded Index Waveguides

Avalanche Photodiode Solving Problems Active couplers

S-9

SLO-1 Step Index Fibers Mode Coupling Noise mechanism in photodetectors Fiber Raman Amplifiers – Configuration – Forward pumping

Active Couplers

SLO-2 Graded Index Fibers Design Optimization of Single Mode Fibers Solving Problems Fiber Raman Amplifiers – Backward pumping

Active Couplers

Learning Resources

1. Gerd Keiser, “Optical Fiber Communications”, 5th Edition, McGraw Hill Education (India), 2015. 2. Khare R P, “Fiber Optics and Optoelectronics”, Oxford University Press, 2014.

3. J. Wilson and J. Hawkes, “Optoelectronics – An Introduction”, Prentice Hall, 1995. 4. Pallab Bhattacharya, “Semiconductor Optoelectronic Devices”, Prentice Hall of India Pvt. Ltd, 2006.

Learning Assessment

Bloom’s

Level of Thinking


CLA – 1 (10%) CLA – 2 (15%) CLA – 3 (15%) CLA – 4 (10%)#


Level 1 Remember

40 % - 30 % - 30 % - 30 % - 30% - Understand

Level 2 Apply

40 % - 40 % - 40 % - 40 % - 40% - Analyze

Level 3 Evaluate

20 % - 30 % - 30 % - 30 % - 30% - Create



1. Mr. Anuj Kumar, Bombardier Transportation, Ahmedabad, [email protected] 1. Dr. Meenakshi, Professor of ECE, CEG, Anna University, [email protected] 1. Dr. S. Sathiyan, SRMIST



Course Code

18ECO108J Course Name

EMBEDDED SYSTEM DESIGN USING ARDUINO Course

Category O Open elective courses

L T P C

2 O 2 3


Nil Co-requisite

Courses Nil

Progressive Courses

Nil

Course Offering Department ECE Data Book / Codes/Standards Nil


CLR-1 : Get to know about ARDUINO hardware details and environment 1 2 3 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 CLR-2 : To understand the core elements of ARDUINO programming language

Leve

l of T

hink

ing

(Blo

om)

Exp

ecte

d P

rofic

ienc

y (%

)

Exp

ecte

d A

ttain

men

t (%

)

Eng

inee

ring

Kno

wle

dge

Pro

blem

Ana

lysi

s

Des

ign

& D

evel

opm

ent

Ana

lysi

s, D

esig

n,

Res

earc

h

Mod

ern

Too

l Usa

ge

Soc

iety

& C

ultu

re

Env

ironm

ent &

Sus

tain

abili

ty

Eth

ics

Indi

vidu

al &

Tea

m W

ork

Com

mun

icat

ion

Pro

ject

Mgt

. & F

inan

ce

Life

Lon

g Le

arni

ng

PS

O–1

: Pro

fess

iona

l

Ach

ieve

men

t

PS

O –

2: P

roje

ct

Man

agem

ent T

echn

ique

s

PS

O –

3: A

naly

ze &

Res

earc

h

CLR-3 : Create insights to the concepts of serial communication

CLR-4 : To use common input and output devices

CLR-5 : Apply the ARDUINO programming into real time applications

CLR-6 :


CLO-1 : Analyze the programming skill 2 80 70 H - - - - - - - - - - - H H

CLO-2 : Apply the real time data’s into digital 2 85 75 H H H H H - - - H - H - - H H

CLO-3 : Interact with almost many devices 2 75 70 H - H H H - - - H - H - H H - CLO-4 : Learn techniques to handle timer delays and IO devices 2 85 80 H H H H H - - - H - H - H H -

CLO-5 : Use and modifying the existing libraries 2 85 75 H - H H H - - - H - H - H H -

CLO-6 :

Duration (hour)

12 12 12 12 12

S-1 SLO-1 Introduction to arduino platform Introduction To Arduino C Analog And Serial Communication IO Programming Case Studies

SLO-2 Block diagram Arduino C Data Types . Introduction To Analog Communication Introduction To Timer/Counters Wireless Communication Using Zigbee

S-2 SLO-1 AT mega 328p architecture Decision Making in C Pulse Width Modulation Introduction To Timer/Counters Bluetooth

SLO-2 AT mega 328p architecture Decision Making in C RS232

Timer programming Robotics -Motor And Sensor

S 3-4 SLO-1 Lab 1 Getting Started With Adriano

Lab 4 -Sensor Interfacing For Temperature Monitoring

Lab 7: Actuators – Stepper Motor Lab10:Interrupt Programming Lab 13:Mini Project

SLO-2 CCS And AVR Studio 7 Blinking Led Lab 4 -Sensor Interfacing For Displacement Measurement

Lab 7: Actuators – Stepper Motor Lab10:Interrupt Programming Lab 13:Mini Project

S-5 SLO-1 Pin function

Program Loops in C I2C

Timer programming Security-RFID, Infrared

SLO-2 Overview of main features-I/O ports Functions in C

I2C Timer programming

Security-RFID, Infrared

S-6 SLO-1

Features-timers,interrupts Introduction to Pointers I2C Timer programming

Bio medical application SLO-2

S 7-8 SLO-1 Lab 2 GPIO LED

Lab 5: PWM BASED SERVO MOTOR INTERFACING

Lab 8: DC MOTOR Lab11:Watch Dog Timer Lab14:Model Practical

SLO-2 Switch Based Led Control Lab 5: PWM Based Servo Motor Interfacing

Lab 8: DC MOTOR Lab11:Watch Dog Timer Lab14:Model Practical

S-9 SLO-1 Features-PWM,SERIAL PORT Using Pointers Effectively SPI Protocol Interrupts

Bio medical application


SLO-2 Features-ADC Structures, Unions, and Data Storage SPI Protocol

Interrupt programming Bio medical application

S-10 SLO-1

Introduction to Arduino IDE Arduino Libraries Interfacing with sensors

External interrupt GPS Navigation

SLO-2 Writing ,saving,compiling with IDE. Arduino Libraries

Interfacing with sensors External interrupt GPS Navigation

S11-12 SLO-1 Lab 3:DISPLAY INTERFACE-7 SEGMENT

Lab 6:SERIAL COMMUNICATION Lab 9: Repeat/Revision Of Experiments Lab 12 : I2C Lab:15 University Practical

SLO-2 LCD 16x2 Matrix Lab 6:Serial Communication Lab 9: Repeat/Revision Of Experiments

Lab 12: I2C Lab:15 University Practical

Learning Resources

1. Michael-Margolis,Arduino-Cookbook., Revised edition, O’Reilly,1st edition, 2011 2. D.Dale.Wheat, Arduino.Internals, TIA publication, 5th edition, 2011

3. James M. Fiore, Embedded Controllers Using C and Arduino, ARDUINO open source community, 2018 4. Jack Purdum ,Beginning C for Arduino , Apress, 2012

Learning Assessment

Bloom’s

Level of Thinking



Level 1 Remember

20% 20% 15% 15% 15% 15% 15% 15% 15% 15% Understand

Level 2 Apply

20% 20% 20% 20% 20% 20% 20% 20% 20% 20% Analyze

Level 3 Evaluate

10% 10% 15% 15% 15% 15% 15% 15% 15% 15% Create

Total 100 % 100 % 100 % 100 % -


Course Designers


1. Mr. Anuj Kumar, Bombardier Transportation, Ahmedabad, [email protected] 1. Dr. Meenakshi, Professor of ECE, CEG, Anna University, [email protected] 1.Mrs. S. Suhasini,, SRM IST



Course Code


EMBEDDED SYSTEM DESIGN USING RASPBERRY PI Course


L T P C

2 0 2 3


Nil Co-requisite

Courses Nil

Progressive Courses

Nil



CLR-1 : Understanding the programing of python for Raspberry Pi 1 2 3 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 CLR-2 : Applying python programming on GPIO and interfacing motors using Raspberry Pi

Leve

l of T

hink

ing

(Blo

om)

Exp

ecte

d P

rofic

ienc

y (%

)

Exp

ecte

d A

ttain

men

t (%

)

Eng

inee

ring

Kno

wle

dge

Pro

blem

Ana

lysi

s

Des

ign

& D

evel

opm

ent

Ana

lysi

s, D

esig

n, R

esea

rch

Mod

ern

Too

l Usa

ge

Soc

iety

& C

ultu

re

Env

ironm

ent &

Sus

tain

abili

ty

Eth

ics

Indi

vidu

al &

Tea

m W

ork

Com

mun

icat

ion

Pro

ject

Mgt

. & F

inan

ce

Life

Lon

g Le

arni

ng

PS

O–1

: Pro

fess

iona

l Ach

ieve

men

t

PS

O –

2: P

roje

ct M

anag

emen

t T

echn

ique

s

PS

O –

3: A

naly

ze &

Res

earc

h CLR-3 : Applying python programming on GPIO switch and keyboard

CLR-4 : Create insights to the concepts and programming of motion detection ,GPS programming, light sensor ,gas detection

CLR-5 : Analyze and understand the working principle and data sheet of temperature sensor, gas sensor ,ADC, ultrasonic rangefinder, Acceleration and light sensor

CLR-6 : Utilize the technology of node js ,cloud service and MQTT Protocol for moving sensor data to web


CLO-1 : Apply python for Raspberry Pi 2 80 70 H H - - H - - - - - - - H - -

CLO-2 : Analyze data sheet and functioning of sensors 2 85 75 H H H H H - - - - - - - - - H

CLO-3 : Apply python programming on GPIO of Raspberry Pi and interfacing of sensor 2 75 70 H H H H - - - - - - - - H - -

CLO-4 : Apply python programming on GPIO of Raspberry Pi to interfacing of actuators 2 85 80 H H H H H - - - - - - - H - - CLO-5 : Apply python programming on GPIO of Raspberry Pi to interfacing input and display device 2 85 75 H - H H - - - - - - - - H - -

CLO-6 : Apply technology of node js ,cloud service and MQTT Protocol for IOT application 2 80 70 H - H - H - - - - - - - - - H

Duration (hour)


Basic python programming


Programming interrupts –Motor control, switches and keyboard interface


Sensor interface and programming


Temperature sensor and display interface programming


Publishing sensor data on web service

12 12 12 12 12

S-1

SLO-1

Python Basics- Editing Python Programs with IDLE, Variables, displaying Output, Reading User Input , Arithmetic, Creating Strings

Programming with Interrupts Detecting Movement-PIR sensor Measuring Temperature Using a Digital Sensor

publish sensor data on web service-building a home security dash board

SLO-2

Concatenating (Joining) Strings, Converting Numbers to Strings, Converting Strings to Numbers ,Find the Length of a String, Find the Position of One String Inside Another, Extracting Part of a String, Replacing One String of Characters with Another Inside a String ,Converting a String to Upper- or Lowercase

Programming with Interrupts Data sheet analysis of PIR sensor Data sheet analysis Digital Temperature Sensor

publish sensor data on web service-building a home security dash board

S-2

SLO-1 Running Commands Conditionally, Comparing Values, Logical Operators,

Controlling GPIO Outputs Using a Web Interface

Adding GPS to the Raspberry Pi Measuring Distance-ultrasonic rangefinder MQTT Protocol

SLO-2

Repeating Instructions an Exact Number of Times ,Repeating Instructions Until Some Condition Changes , Breaking Out of a Loop, Defining a Function in Python

Controlling GPIO Outputs Using a Web Interface

Data sheet analysis of GPS Data sheet analysis ultrasonic rangefinder MQTT Protocol- installation and setting account ,token creation ,reading sensor data and pushing to thingsboard


S-3-4 SLO-1 Lab 1: Arithmetic and string Lab 7: Programming on interrupts Lab 13: Programming on PIR sensor

Lab 19: Programming on Digital Temperature Sensor

Lab 25: Publish sensor data on web service

SLO-2 Lab 2: Loop Lab 8: Programming on Web Interface Lab 14: Programming on GPS Lab 20: Programming on ultrasonic rangefinder

Lab 26: Publish sensor data on web service

S-5

SLO-1

Creating a List , Accessing Elements of a List, Find the Length of a List , Adding Elements to a List , Removing Elements from a List,

Controlling Servo Motors using PWM Using Resistive Sensors Logging to a USB Flash Drive basic of java scripts –node.js

SLO-2

Creating a List by Parsing a String, Iterating over a List, Enumerating a List, Sorting a List, Cutting Up a List. Applying a Function to a List

Controlling the Speed of a DC Motor Measuring Light Logging to a USB Flash Drive Modules-HTML module

S-6 SLO-1

Creating a Dictionary ,Accessing a Dictionary, Removing Things from a Dictionary,

Controlling the Direction of a DC Motor Detecting Methane Using a Four-Digit LED Display Modules –file –event

SLO-2 Iterating over Dictionaries Using a Unipolar Stepper Motor Data sheet analysis of gas sensor Displaying Messages on an I2C LED matrix with data sheet discussion

Modules –file –event

S-7-8 SLO-1 Lab 3: Program on list Lab 9: Programming on Stepper Motor Lab 15: Programming on light sensor

Lab 21: Programming on Four-Digit LED Display

Lab 27: Programming on node js HTML module

SLO-2 Lab 4: Program on Dictionary Lab 10: Programming on DC Motor Lab 16: Programming on Gas sensor Lab 22: Programming on I2C LED matrix

Lab 28: Programming on node js file and event module

S-9 SLO-1

Controlling Hardware-Connecting an LED-Controlling the Brightness of an LED

Using a Bipolar Stepper Motor Measuring a Voltage using MCP3008 And data sheet of MCP3008

Displaying Messages on an Alphanumeric LCD

LED blinking using node.js

SLO-2 a Buzzing Sound Building a Simple Robot Rover Using Resistive Sensors with an ADC Displaying Messages on an Alphanumeric LCD

LED blinking using node.js

S-10 SLO-1

Switching a High-Power DC Device Using a Transistor

Digital Inputs-Connecting a Push Switch-Toggling with a Push Switch-Using a Two-Position Toggle or Slide Switch

Measuring Temperature with an ADC Cloud service for IOT building java script client using MQTT broker

SLO-2 Switching a High-Power Device Using a Relay

Using a Rotary (Quadrature) Encoder and Using a Keypad

Measuring Acceleration and data sheet discussion of Acceleration sensor

Cloud service for IOT building java script client using MQTT broker

S-11, 12

SLO-1 Lab 5: LED blinking and Brightness control Lab 11: Programming on Switch Lab 17: Programming on ADC

Lab 23: Programming on an Alphanumeric LCD

Lab 29: Programming on LED blinking using node.js

SLO-2 Lab 6: Switching a High-Power DC Device Lab 12: Programming on Keypad

Lab 18: Programming on Measuring Acceleration

Lab 24: Programming on an Alphanumeric LCD

Lab 30: Building java script client using MQTT broker

Learning Resources

1. Simon Monk, “Raspberry Pi Cookbook”, O’Reilly Media, Inc, 2014. 2. Volker Ziemann, “A Hands-On Course in Sensors Using the Arduino and Raspberry Pi, CRC

Press, 2018.

3. Colin Dow, “Internet of Thing: Programming Projects - Build modern IoT solutions with the Raspberry Pi 3 and Python”, packtpub 2018.

4. https://thingsboard.io/docs/ 5. https://www.w3schools.com/nodejs/nodejs_raspberrypi_blinking_led.asp

Learning Assessment

Bloom’s

Level of Thinking



Level 1 Remember

20% 20% 15% 15% 15% 15% 15% 15% 15% 15% Understand

Level 2 Apply

20% 20% 20% 20% 20% 20% 20% 20% 20% 20% Analyze

Level 3 Evaluate

10% 10% 15% 15% 15% 15% 15% 15% 15% 15% Create

Total 100 % 100 % 100 % 100 % 100 %




1. Mr. Anuj Kumar, Bombardier Transportation, Ahmedabad, [email protected] 1. Dr. Meenakshi, Professor of ECE, CEG, Anna University, [email protected] 1. Dr. P. Vijayakumar, SRMIST



Course Code


3D PRINTING HARDWARE AND SOFTWARE Course


L T P C

2 0 2 3

Pre-requisite

Courses Nil


Nil Progressive

Courses Nil


Course Learning Rationale (CLR): The purpose of learning this course is to:

Learning


CLR-1 : Understand the tools available for 3D printing 1 2 3 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

CLR-2 : Familiarize with 3D design software and hardware

Leve

l of T

hink

ing

(Blo

om)

Exp

ecte

d P

rofic

ienc

y (%

)

Exp

ecte

d A

ttain

men

t (%

)

Eng

inee

ring

Kno

wle

dge

Pro

blem

Ana

lysi

s

Des

ign

& D

evel

opm

ent

Ana

lysi

s, D

esig

n, R

esea

rch

Mod

ern

Too

l Usa

ge

Soc

iety

& C

ultu

re

Env

ironm

ent &

Sus

tain

abili

ty

Eth

ics

Indi

vidu

al &

Tea

m W

ork

Com

mun

icat

ion

Pro

ject

Mgt

. & F

inan

ce

Life

Lon

g Le

arni

ng

PS

O–1

: Pro

fess

iona

l Ach

ieve

men

t

PS

O –

2: P

roje

ct M

anag

emen

t T

echn

ique

s

PS

O –

3: A

naly

ze &

Res

earc

h CLR-3 : Understand the 3D design criteria and its limitations. CLR-4 : Learn the contemporary technology available for 3D design and printing

CLR-5 : Understand various post processing methods involved in 3D printing technology

CLR-6 : Develop the skillset on 3D component design and development using contemporary commercial software and hardware available.


CLO-1 : Apply the 3D printing tools for components design 1 80 60 M M

CLO-2 : Able to optimistically select the 3D design software and hardware for the given problem 1 80 60 M H

CLO-3 : Capability to solve 3D design components design problems 2 75 60 M M M CLO-4 : Choose the contemporary technology available for 3D design and printing 3 80 60 M M L

CLO-5 : Apply various post processing methods involved in 3D printing technology 2 80 60 H

CLO-6 : Ability to develop the skillset on 3D component design and development using contemporary commercial software and hardware available.

2 80 60

M M

Duration (hour)

Introductions to 3D design tools Three-dimensional (3D) Modeling 3D Design Fundamentals and Projects 3D Printing and its Technologies Post Processing - Product Visualization and Print Cleaning

S-1

SLO-1 Introduction to Maya GUI - Object creation workflow, Constructing object primitives to scale and with accuracy

An overview of CAD software packages - Introduction to Fusion 360 - Drawing based workflow, Drawing constraints - Surfacing operations.

The good, the bad, and the ugly of design History of 3D printing - Overview of 3D Printing technologies

Workflows for printing SLO-2

S-2 SLO-1 Duplication and arrayed duplication - Grid

and point/vertex snapping Moving Parts and Articulation Hinges - Ball and sockets

Prominent Designers Selective Laser Sintering (SLS) Direct Metal Laser Sintering (DMLS)

Software and Drivers - Formats for Printing (SLA, OBJ, CAD, etc.) SLO-2

S 3-4

SLO-1 Understanding NURBS: NURBS Surfaces advantages, Similarities and differences between NURBS and CAD drawings Curve and surface construction

Creating a part negative, Creating Text in Maya the proper way (NURBS Curves, surface lofts, conversion to polygon) Painterly tools (Sculpt Geometry Tool, etc.)

Franchises Success stories, Pop culture Vacuum forming - Resin casting - Injection Molding - Terms and standards for injection molding systems

Post and Export Print Lab setup SLO-2

S-5 SLO-1 Understanding 3D geometry - Modeling

workflows for Polygons - Additive vs. Subtractive Tools - Mesh editing

Flexibility and elasticity, Locks, bolts, and fasteners Threading (taps and dies)

Early decision making criteria Fused Deposition Modeling (FDM) -Stereolithography (SLA)

Cleanup and airtight modeling SLO-2

S-6

SLO-1 Best Practices for constructing printable polygon meshes

Interfacing, support, and reinforcement Knowing the product Laminated Object Manufacturing (LOM) - Electron Beam Melting (EBM)

Loading models and arranging print stage SLO-2

Fundamental Structure - Combining, merging, and sewing up polygon meshes


S 7-8

SLO-1 Best Practices for constructing printable polygon meshes - Fundamental Structure - Combining, merging, and sewing up polygon meshes

How the modeling software packages differ from CAD packages, Sketch/drawing based workflows, Similarities and differences between CAD and NURBS.

Brainstorming and critique in the early design phase Group critiques of in-progress projects

Printing Resolutions and Tolerances Materials Properties (Temperature, Flexibility, Strength, Brittleness)

Printing - Removing support material SLO-2

S-9 SLO-1

Understanding two-manifold vs. non-manifold geometry Form and function visualizing the assembly

process Early decision-making criteria Knowing the product Vision and Reality

3D Printing (3DP) – Selective laser melting (SLM)

Special topics – 3D Scanners and its types SLO-2

Exporting geometry - Laying out a simple model on a stage for print

S-10

SLO-1 Hollow forms and the importance of reducing volume Cost of size, cost of volume, cost of detail, cost of time State table

Complex interactions and motorizations Calculating the total cost Progress checks and group critiques of in-progress projects

Final cleanup and processing of files for printing

Reverse engineering, Concepts and its hardware and software SLO-2

S 11-12

SLO-1 Clean and uniform topology, Illustrator, IGES, and other import/export pipelines

Broad overview of manufacturing techniques Molding, sculpting, lathing, lofting, welding, cutting, drilling, gluing, etc

Brainstorming and critique in the early design phase Group critiques of in-progress projects

Planning for injection molding - 3D Printing for injection molding

High speed machining SLO-2

Learning Resources

1. Hod Lipson, Melba Kurman, Fabricated: The New World of 3D Printing, Wiley, 2013 2. Matthew Griffin, Design and Modeling for 3D Printing, Maker Media, Inc., 2013. 3. Rob Thompson, Manufacturing Processes for Design Professionals, Thames & Hudson; Reprint edition, 2007. 4. https://web.stanford.edu/class/me137/

5. SolidWorks Gallery: http://www.3dcontentcentral.com/default.aspx

6. 3D Anatomy Models: http://lifesciencedb.jp/bp3d/?lng=en 7. AutoDesk Fusion360 HomePage: http://fusion360.autodesk.com 8. International Journal of Rapid Manufacturing 9. Academic Journals on 3D Printing 10. International Journal of Rapid Manufacturing

Learning Assessment

Bloom’s

Level of Thinking


CLA – 1 (10%) CLA – 2 (15%) CLA – 3 (15%) CLA – 4 (10%)#


Level 1 Remember

20% 20% 15% 15% 15% 15% 15% 15% 15% 15% Understand

Level 2 Apply

20% 20% 20% 20% 20% 20% 20% 20% 20% 20% Analyze

Level 3 Evaluate

10% 10% 15% 15% 15% 15% 15% 15% 15% 15% Create

Total 100 % 100 % 100 % 100 % -


Course Designers


1. Mr. Anuj Kumar, Bombardier Transportation, Ahmedabad, [email protected] 1. Dr. Meenakshi, Professor of ECE, CEG, Anna University, [email protected] 1. Mr. S. Karuppudaiyan, Mechanical, SRMIST

2. Mr. Hariharasudhan - Johnson Controls, Pune, [email protected] 2. Dr. Venkatesan, Sr. Scientist, NIOT, Chennai, [email protected] 2. Dr. P. Eswaran, SRMIST


Course Code


BASIC BIOMEDICAL ENGINEERING Course


L T P C

3 0 0 3


Nil Co-requisite

Courses Nil

Progressive Courses

Nil

Course Offering Department Electronics and Communication Engineering with specialization in Biomedical Engineering

Data Book / Codes/Standards Nil


CLR-1 : Analyze the scopes and roles of Biomedical Engineering 1 2 3 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

CLR-2 : Utilize biomedical instrumentation modules

Leve

l of T

hink

ing

(Blo

om)

Exp

ecte

d P

rofic

ienc

y (%

)

Exp

ecte

d A

ttain

men

t (%

)

Eng

inee

ring

Kno

wle

dge

Pro

blem

Ana

lysi

s

Des

ign

& D

evel

opm

ent

Ana

lysi

s, D

esig

n, R

esea

rch

Mod

ern

Too

l Usa

ge

Soc

iety

& C

ultu

re

Env

ironm

ent &

Sus

tain

abili

ty

Eth

ics

Indi

vidu

al &

Tea

m W

ork

Com

mun

icat

ion

Pro

ject

Mgt

. & F

inan

ce

Life

Lon

g Le

arni

ng

PS

O-1

: Pro

blem

Sol

ving

at t

he

inte

rfac

e of

Eng

g. &

Med

icin

e P

SO

-:2:

Des

ign

& D

evel

op

Med

ical

Dev

ices

P

SO

-3: m

ultid

isci

plin

ary

rese

arch

for

heal

th c

are

solu

.

CLR-3 : Utilize medical imaging principles and its applications CLR-4 : Analyze the scope of biomechanics and its applications

CLR-5 : Utilize biomaterials and its applications

CLR-6 : Gain the knowledge about Biomedical Engineering


CLO-1 : Analyze the areas in which biomedical engineers can work 2 85 75 - - - - - - - - - - - L - - L CLO-2 : Analyze the basic biomedical instrumentation unit 3 85 75 L - - - - - - - - - - - - - L

CLO-3 : Analyze basic medical imaging principles 3 85 75 M - - - - - - - - - - - - - -

CLO-4 : Apply the concepts of biomechanics on human body 3 85 75 L - - - - - - - - - - - - - L

CLO-5 : Identify domains where biomedical engineers can work 3 85 75 - - - - - - - - - - - - - - -

CLO-6 : Analyze the applications of Biomedical Engineer 3 85 75 M - - - - - - - - - - L - - L

Duration (hour)

Introduction to Biomedical Engineering Biomedical Instrumentation Medical Imaging system Biomechanics Biomaterials

9 9 9 9 9

S-1 SLO-1

Evolution of the modern health care system

Introduction: Bioinstrumentation X-Ray production Introduction: Principal Areas of Biomechanics

Biomaterials Introduction

SLO-2 Modern Healthcare system Basic Bioinstrumentation System X-Ray Imaging principle Fundamentals of biomechanics and qualitative analysis

Classification of Biomaterials

S-2 SLO-1 What is Biomedical Engineering Physiological Systems of the body Application of X-ray imaging Kinematics of Human Body Models Properties of Biomaterials: Mechanical

SLO-2 Roles played by the Biomedical Engineers Sources of Biomedical Signals

CT-Imaging principle Kinetics of Human Body Models Properties of Biomaterials: Chemical

S-3 SLO-1 Types of Biomedical Engineering Origin of Bioelectric Signals CT-Imaging Applications Modelling of Bio systems Properties of Biomaterials: Biological

SLO-2 Surgical instruments and medical devices Origin of Bioelectric Signals MRI- Introduction

Tissue Biomechanics Biomedical alloys and its medical applications- titanium

S-4 SLO-1 Biomaterials

Various Electrodes used for picking the biomedical signals

MRI Imaging principles Modelling in Cellular Biomechanics Biomedical alloys and its applications- Stainless steel, Cobalt-Chromium alloys

SLO-2 Biomechanics Various Electrodes used for picking the biomedical signals

MRI Imaging principles Fluid mechanics Introduction to ceramics

S-5 SLO-1

Tissue Engineering

ECG Introduction MRI Imaging Applications Mechanics of the musculoskeletal system impact

Alumina, Zirconia

SLO-2 Neural Engineering ECG system Block diagram and its uses Ultrasound basics Mechanics of Blood Vessels Titanium, Hydroxyapatite

S-6 SLO-1 Telehealth EEG Introduction Ultrasound Imaging Cardiac Biomechanics Glass ceramics


SLO-2 Bio signal processing EEG system Block diagram and its uses Ultrasound Application Biomechanics of Chest and Abdomen Introduction to polymers

S-7 SLO-1 Medical Imaging EMG Introduction fMRI Imaging Cochlear Mechanics Types of polymers

SLO-2 Computational modelling EMG system Block diagram and its uses fMRI Imaging Application Dynamics of Human Body Models Biodegradable polymers and its applications

S-8 SLO-1 BioMEMS Cardiac pacemakers and its uses PET- Imaging Gait analysis Composites and its applications

SLO-2 Mobile POCT Cardiac Defibrillators and its uses PET Imaging Application Biomechanics in physical education Wound-Healing process

S-9 SLO-1

Professional Status of Biomedical Engineering

Patient Monitoring System Introduction SPECT Imaging Biomechanics in strength and conditioning Biomaterials for artificial valve, Ear

SLO-2 Professional Societies Patient Monitoring System Block diagram and its uses

SPECT Imaging Application

Biomechanics in sports medicine and rehabilitation

Biomaterials for artificial Skin, Eye

Learning Resources

1. Anthony Y. K. Chan, Biomedical Device Technology: Principles and Design, Charles C Thomas publisher, 2008

2. R.S Khandpur, Handbook of Biomedical Instrumentation, 3rd ed., McGraw Hill, 2014 3. Joseph J. Carr, John M.Brown, Introduction to Biomedical Equipment Technology, 4th ed., Pearson, 2002

4. John Enderle, Joseph Bronzino, Introduction to Biomedical Engineering, Academic Press, 2011 5. Andrew R Webb, Introduction to Biomedical Imaging, Wiley-IEEE Press, 2003 6. Sujata V. Bhat, Biomaterials, 2nd ed., Alpha Science International, 2005

Learning Assessment

Bloom’s

Level of Thinking


CLA – 1 (10%) CLA – 2 (15%) CLA – 3 (15%) CLA – 4 (10%)#


Level 1 Remember

40 % - 30 % - 30 % - 30 % - 30% - Understand

Level 2 Apply

40 % - 40 % - 40 % - 40 % - 40% - Analyze

Level 3 Evaluate

20 % - 30 % - 30 % - 30 % - 30% - Create

Total 100 % 100 % 100 % 100 % 100 %


Course Designers


1. Sathyanarayanan J, Mindray Medical India Pvt Ltd, [email protected] 1. Dr. S. Poonguzhali, Anna University, [email protected] 1. Ms. Oinam Robita Chanu, SRMIST

2. Mr. Anuj Kumar, Bombardier Transportation, Ahmedabad, [email protected] 2. Dr. Meenakshi, Professor of ECE, CEG, Anna University, [email protected] 2. Dr. D. Kathirvelu, SRMIST



Course Code


HOSPITAL INFORMATION SYSTEMS Course


L T P C

3 0 0 3


Nil Co-requisite

Courses Nil

Progressive Courses

Nil




CLR-1 : Utilize the planning and organizational activities of Hospitals 1 2 3 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

CLR-2 : Analyze the concepts in clinical and diagnostic services

Leve

l of T

hink

ing

(Blo

om)

Exp

ecte

d P

rofic

ienc

y (%

)

Exp

ecte

d A

ttain

men

t (%

)

Eng

inee

ring

Kno

wle

dge

Pro

blem

Ana

lysi

s

Des

ign

& D

evel

opm

ent

Ana

lysi

s, D

esig

n, R

esea

rch

Mod

ern

Too

l Usa

ge

Soc

iety

& C

ultu

re

Env

ironm

ent &

Sus

tain

abili

ty

Eth

ics

Indi

vidu

al &

Tea

m W

ork

Com

mun

icat

ion

Pro

ject

Mgt

. & F

inan

ce

Life

Lon

g Le

arni

ng

PS

O-1

: Pro

blem

Sol

ving

at t

he

inte

rfac

e of

Eng

g. &

Med

icin

e P

SO

-:2:

Des

ign

& D

evel

op

Med

ical

Dev

ices

P

SO

-3: m

ultid

isci

plin

ary

rese

arch

for

heal

th c

are

solu

.

CLR-3 : Utilize the policies and procedures about support services and material management

CLR-4 : Utilize the features in staff and safety management in hospital CLR-5 : Analyze the reporting system and recent advancement in hospital administration

CLR-6 : Apply all the advanced application the field of telemedicine


CLO-1 : Analyze the role of hospitals and ensure proper healthcare delivery 2 85 75 L - - - - M - - - - - - L - - CLO-2 : Suggest appropriate technologies and services in clinical and diagnostic field 3 85 75 M - - - - - - - - - - - L - -

CLO-3 : Analyze the supportive services and the use of proper material management 3 85 75 M - - - - - M L - - - - M - L

CLO-4 : Identify objectives of staff management and ensure safety management in hospitals 3 85 75 M - - - - - - L - - - L L - -

CLO-5 : Implement the advance technologies and effectively evaluate the healthcare information 3 85 75 L - - - - M - L L - - - L L L

CLO-6 : Implement the various standards in hospital and healthcare services 3 85 75 L - - - - M - - - - - - L - -

Duration (hour)

Planning and designing of hospitals Inpatient and Outpatient services Material management services Management services in hospitals Patient record and advancement in

healthcare services

9 9 9 9 9

S-1 SLO-1 Hospital as a social system

Design and planning of emergency department

Pharmacy services- goals of hospital pharmacy services

Human resource management- Human resource development

Medical record management- Importance of medical record

SLO-2 Primary health care and hospitals Health information and counselling Staff organization and divisions of hospital pharmacy services

Hospital staff skill development Methods of record keeping

S-2 SLO-1

Hospital planning and design-Guiding principles in planning

Outpatient services –Types and functions of outpatient department

Benefits of formulatory system Nursing management-Functions of nursing management

Electronic medical record-Benefits and drawbacks

SLO-2 Regionalization of Hospital service

Physical features of outpatient department Other services of hospital pharmacy Nursing management- organizational structure

Record retention and disposal

S-3 SLO-1

Role of health promotion approach in hospitals

Ward/Indoor services-Components of the ward system

Transport services-Types of ambulance Biomedical waste management- Types and Composition of Biomedical Waste

Office management -skills required by the office staff

SLO-2 Health promoting hospital system Design of special units Communication and physical facilities of ambulance service

Categories of biomedical waste Functions of office management

S-4 SLO-1 Healthy hospital environment

Operation theatre services-Planning and designing of Operation theatres

Staff transport services Concept of total quality management

Operations research in hospitals-Phases of operation research

SLO-2 Components of healthy hospital environment

Types of Operation theatres Other transport services in hospitals Types of approaches in quality

management Operations research in hospitals- Tools and techniques of operations research


S-5 SLO-1 Creating manpower services

Policies and procedures of operation theatres

Medicolegal services- Steps for Medicolegal Examination

Quality assessment and management tools

Emerging health insurance – components of health insurance

SLO-2 Hospital engineering: Key to efficient healthcare services

Assessing operation theatre utilisation Problems faced by healthcare professionals in medicolegal service

Clinical audit Emerging health insurance-Types of health insurance

S-6 SLO-1

Designing disabled friendly hospitals- Barriers faced and implications in Persons with disabilities

Clinical laboratory services-Introduction and role of laboratory medicine

Food safety in hospitals-Need of food safety

Quality improvement-Cause and effect method

Advantages and common problems of health insurance schemes

SLO-2 Need for disabled-friendly health services Testing procedure in clinical laboratory Sources of food contamination Pareto analysis Role of health and hospital administrators in Health insurance

S-7 SLO-1

Barrier-Free Environment to Universal Design

Radio diagnosis and imaging services-Planning and equipments of radiology department

Materials management- Principles of material management

Failure mode and effect analysis Telemedicine clinic –functions and classification of telemedicine

SLO-2 Overcoming the barriers Advancement in radiology service Concepts of Inventory control Triggers of quality improvement strategy in a hospital

Challenges for telemedicine

S-8 SLO-1 Energy conservation- Classification

Radiation oncology service-Radiotherapy facilities

Modern techniques for inventory control Occupational safety-Roles and responsibilities

Growth of mobile phones and potential of mobile health

SLO-2 Types of energy streams in hospitals Nuclear medicine services-Categorization and nuclear medicine department

Integrated concept for materials management

Prevention of hazards specific to health sector

Mobile health and its applications

S-9 SLO-1 Need for energy conservation Planning of nuclear medicine department

Purchase and procurement system-Essentials for procurement process

Hospital security-Physical security Challenges in implementing information and Communication technology in healthcare

SLO-2 Energy conservation opportunities in hospitals

Ancillary requirements Purchase system Organizational chart of security wing

Information and communication technology applications in healthcare

Learning Resources

1. SonuGoel, Anil Kumar Gupta, Amarjeet Singh, Hospital administration A problem- solving approach, 1st ed., Elsevier, 2014

2. Sakharkar B M, Principles of hospital administration and planning, 2nd ed., Jaypee Brothers Medical Publishers, 2009 3. Kunders G D, Hospitals: Facilities planning and management, 1st ed., Tata Mcgraw Hill, 2008

Learning Assessment

Bloom’s

Level of Thinking


CLA – 1 (10%) CLA – 2 (15%) CLA – 3 (15%) CLA – 4 (10%)#


Level 1 Remember

40 % - 30 % - 30 % - 30 % - 30% - Understand

Level 2 Apply

40 % - 40 % - 40 % - 40 % - 40% - Analyze

Level 3 Evaluate

20 % - 30 % - 30 % - 30 % - 30% - Create

Total 100 % 100 % 100 % 100 % 100 %


Course Designers


1. Sathyanarayanan J, Mindray Medical India Pvt Ltd, [email protected] 1. Dr. S. Poonguzhali, Anna University, [email protected] 1. Dr. D. Ashokkumar, SRMIST

2. Mr. Anuj Kumar, Bombardier Transportation, Ahmedabad, [email protected] 2. Dr. Meenakshi, Professor of ECE, CEG, Anna University, [email protected] 2. Mr. P. Muthu, SRMIST



Course Code


BIOMEDICAL IMAGING Course


L T P C

3 0 0 3


Nil Co-requisite

Courses Nil

Progressive Courses

Nil




CLR-1 : Utilize the working principle of X-ray imaging 1 2 3 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

CLR-2 : Analyze the principle behind tomographic imaging and the reconstruction techniques

Leve

l of T

hink

ing

(Blo

om)

Exp

ecte

d P

rofic

ienc

y (%

)

Exp

ecte

d A

ttain

men

t (%

)

Eng

inee

ring

Kno

wle

dge

Pro

blem

Ana

lysi

s

Des

ign

& D

evel

opm

ent

Ana

lysi

s, D

esig

n, R

esea

rch

Mod

ern

Too

l Usa

ge

Soc

iety

& C

ultu

re

Env

ironm

ent &

Sus

tain

abili

ty

Eth

ics

Indi

vidu

al &

Tea

m W

ork

Com

mun

icat

ion

Pro

ject

Mgt

. & F

inan

ce

Life

Lon

g Le

arni

ng

PS

O-1

: Pro

blem

Sol

ving

at t

he

inte

rfac

e of

Eng

g. &

Med

icin

e P

SO

-:2:

Des

ign

& D

evel

op

Med

ical

Dev

ices

P

SO

-3: m

ultid

isci

plin

ary

rese

arch

for

heal

th c

are

solu

.

CLR-3 : Interpret the theory behind nuclear medicine and utilize the working of imaging modalities in nuclear medicine

CLR-4 : Analyze the physics of ultrasound and the different imaging modes using ultrasound

CLR-5 : Utilize the physical principle of nuclear magnetic resonance and magnetic resonance image reconstruction

CLR-6 : The learner will be to gain knowledge in the working principle of imaging modalities using X-ray, computed tomography, nuclear medicine, ultrasound and magnetic resonance imaging.


CLO-1 : Analyze the physics and principle behind the working of X-ray imaging 2 85 75 M - - - - - - - - - - - M - - CLO-2 : Identify the principle behind working of tomographic imaging and reconstruction procedures. 3 85 75 M - - - - - - - - - - - M - -

CLO-3 : Analyze the working principle of nuclear medicine imaging modalities 3 85 75 M - - - - - - - - - - - M - -

CLO-4 : Identify the physics of ultrasound and the modes of ultrasound imaging 3 85 75 M - - - - - - - - - - - M - -

CLO-5 : Explain the physical principle of magnetic resonance imaging and the instrumental components involved in MR imaging 3 85 75 M - - - - - - - - - - - M - -

CLO-6 : Understand the basic principle and working of medical Imaging systems 3 85 75 M - - - - - - - - - - - M - -

Duration (hour)

X-ray Computed Tomography Ultrasound Magnetic Resonance Imaging Nuclear medicine

9 9 9 9 9

S-1 SLO-1 General principles of Imaging with X-rays Introduction: Tomographic Imaging

Characteristics of sound: Propagation, wavelength, frequency and speed

Principles of NMR Imaging Radionuclide decay terms and relationship

SLO-2 X-ray Production –X-ray source Comparison between tomographic and planar imaging

Pressure, Intensity and dB scale Free Induction decay Nuclear transformation

S-2 SLO-1 X-ray tube current, tube output

Basic principle: Technique of producing CT images

Interaction of ultrasound with matter: Acoustic impedance, reflection, refraction

Excitation, Emission Radionuclide production

SLO-2 Beam intensity, X-ray Energy Spectrum Contrast scale Scattering, Attenuation Relaxation times-T1 & T2 Radiopharmaceuticals

S-3 SLO-1 Coherent and Compton scattering

System components: first generation, second generation, third generation,

Transducers: Piezoelectric materials, resonance transducers

Spin echo technique Radiation detection and measurement: types of detectors, Gas-filled detectors

SLO-2 Photoelectric effect Fourth, fifth and spiral/helical CT Damping block, matching layer, Resolution Spin echo contrast weighting Scintillation detectors

S-4 SLO-1

Linear and Mass attenuation coefficient of X-rays in tissue

X-ray source, types of detectors Transducer arrays T1 weighted image Semiconductor detectors

SLO-2 Instrumentation for Planar X-ray Imaging: Collimators

Gantry and slip ring technology, Collimation and filtration

Multi-element linear array scanners T2 weighted image Pulse height spectroscopy

S-5 SLO-1 Antiscatter grids Intensifying screens Processing system Multi-linear and phased array Gradient recalled sequence Non-imaging detector applications


SLO-2 X-ray films Iterative reconstruction, back projection reconstruction

Generation and detection of ultrasound Proton density weighted images, pulse sequence for fast imaging

Counting statistics

S-6 SLO-1

Instrumentation for computed and digital radiography

Filtered back projection Basic pulse echo apparatus: A-scan Slice selection gradient Nuclear imaging

SLO-2 X-ray Image characteristics: Signal to Noise ratio Helical /Spiral CT: Helical pitch B-Mode Frequency encode gradient Anger scintillation camera

S-7 SLO-1 Spatial resolution, Contrast to Noise ratio Basic reconstruction approaches M-mode Phase encode gradient

Basic principle :Emission computed tomography

SLO-2 X-ray contrast agents, X-ray angiography Slice sensitivity profile Echocardiograph 2D spin echo data acquisition Single photon emission computed tomography

S-8 SLO-1 X-ray Fluoroscopy Multislice CT Duplex scanner

Basic NMR components: Main magnet, RF transmitter/receiver

Positron emission tomography

SLO-2 X-ray mammography Detector configuration Intravascular imaging Body coils, gradient coils Imaging techniques and scanner instrumentation

S-9 SLO-1 Dual energy Imaging Measurement of X-ray dosage

Artefacts: Refraction, shadowing and enhancement

fMRI : Basic principle Dual modality: PET/CT

SLO-2 Abdominal X-ray scans Methods for dose reduction Reverberation BOLD concept, MR spectroscopy Working and applications

Learning Resources

1. R.S.Khandpur, Handbook of Biomedical instrumentation, 3rd ed., Tata McGraw Hill, 2014 2. Jerrold T. Bushberg, John M. Boone, The essential physics of medical imaging, 3rd ed., Lippincott Williams &

Wilkins, 2011

Learning Assessment

Bloom’s

Level of Thinking



Level 1 Remember

40 % - 30 % - 30 % - 30 % - 30% - Understand

Level 2 Apply

40 % - 40 % - 40 % - 40 % - 40% - Analyze

Level 3 Evaluate

20 % - 30 % - 30 % - 30 % - 30% - Create

Total 100 % 100 % 100 % 100 % 100 %


Course Designers


1. Sathyanarayanan J, Mindray Medical India Pvt Ltd, [email protected] 1. Dr. S. Poonguzhali, Anna University, [email protected] 1. Dr. T. Jayanthi, SRMIST

2. Mr. Anuj Kumar, Bombardier Transportation, Ahmedabad, [email protected] 2. Dr. Meenakshi, Professor of ECE, CEG, Anna University, [email protected] 2. Dr. U. Snekhalatha, SRMIST



Course Code


HUMAN ASSIST DEVICES Course


L T P C

3 0 0 3


Nil Co-requisite

Courses Nil

Progressive Courses

Nil




CLR-1 : Utilize the latest technology and device used for assisting human disability 1 2 3 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

CLR-2 : Analyze various devices used for mobility

Leve

l of T

hink

ing

(Blo

om)

Exp

ecte

d P

rofic

ienc

y (%

)

Exp

ecte

d A

ttain

men

t (%

)

Eng

inee

ring

Kno

wle

dge

Pro

blem

Ana

lysi

s

Des

ign

& D

evel

opm

ent

Ana

lysi

s, D

esig

n, R

esea

rch

Mod

ern

Too

l Usa

ge

Soc

iety

& C

ultu

re

Env

ironm

ent &

Sus

tain

abili

ty

Eth

ics

Indi

vidu

al &

Tea

m W

ork

Com

mun

icat

ion

Pro

ject

Mgt

. & F

inan

ce

Life

Lon

g Le

arni

ng

PS

O-1

: Pro

blem

Sol

ving

at t

he

inte

rfac

e of

Eng

g. &

Med

icin

e P

SO

-:2:

Des

ign

& D

evel

op

Med

ical

Dev

ices

P

SO

-3: m

ultid

isci

plin

ary

rese

arch

for

heal

th c

are

solu

.

CLR-3 : Utilize the various assist device used for hearing

CLR-4 : Utilize the various assist device used for vision CLR-5 : Utilize the various assist device used in orthopaedic

CLR-6 : Analyze the working principles of cardiac assist devices and Artificial kidney


CLO-1 : Comprehend the assistive technology (AT) used for mobility 2 85 75 M - - - - - - - - - - - M - - CLO-2 : Analyze the Assist technology used for hearing 3 85 75 M - - - - - - - - - - - - L -

CLO-3 : Evaluate the Assist technology used for sensory impairment of vision 3 85 75 - - - - - - - - - - - - - L -

CLO-4 : Evaluate the assist device used in orthopedic 3 85 75 M - - - - - - - - - - - M L -

CLO-5 : Analyze the latest use of assist technology in health care 3 85 75 M - - - - - - - - - - - M - -

CLO-6 : Design the prosthetic heart valves and pacemaker 3 85 75 M - - - - - - - - - - - M - -

Duration (hour)

9 9 9 9 9

S-1 SLO-1

Basic assessment and evaluation for mobility

Basic ear anatomy, Mechanism of hearing Anatomy of eye Anatomy of upper & lower extremities - Basic Anatomy and physiology of heart.

SLO-2 Basic assessment and evaluation for mobility

Common tests audiograms Categories of visual impairment Classification of amputation types Cardiac assist devices

S-2 SLO-1 Manual wheelchairs Air conduction, Bone conduction

Intraocular Devices

Prosthesis prescription Intra-Aortic Balloon Pump (IABP),

SLO-2 Electric power wheelchairs Masking techniques, Extraocular Devices Hand and arm replacement Prosthetic heart valves

S-3 SLO-1 Power assisted wheelchairs SISI Permanent Vision Restoration

Different types of models, externally powered limb prosthesis

Evaluation of prosthetic valve

SLO-2 Wheel chair standards & tests - Hearing aids principles Non-Permanent Vision Restoration Different types of models, externally powered limb prosthesis

Heart pacemaker

S-4 SLO-1 Wheel chair transportation Drawbacks in the conventional unit Voice Control Sound Control. Foot orthosis CABG

SLO-2 Control systems, navigation in virtual space by wheelchairs

DSP based hearing aids Sensor Technology Adapted for the Vision Impaired

Pediatric orthoses Extracorporeal support

S-5 SLO-1 Wheel chair seating and pressure ulcers. Cochlear Implants Libraille Wrist-hand orthosis Vascular prosthesis

SLO-2 EOG based voice controlled wheelchair Internal Hearing Aid GRAB feedback in orthotic system Vascular prosthesis

S-6 SLO-1 BCI based wheelchair External Hearing Aid mathematical Braille Components of upper limb prosthesis Artificial heart


SLO-2 Fuzzy logic expert system for automatic tuning of myoelectric prostheses

Permanent Hearing Restoration Blind mobility aids Components of lower limb prosthesis Intermittent positive pressure breathing (IPPB) type assistance for lungs

S-7 SLO-1 Intelligent prosthesis Non-Permanent Hearing Restoration Reading writing & graphics access,

Lower extremity- and upper extremity- orthoses

Dialysis for kidneys

SLO-2 Intelligent prosthesis Touch Tactile Haptic Technology Orientation & navigation Aids Lower extremity- and upper extremity- orthoses

Artificial Kidney

S-8 SLO-1 Future trends in assistive technology Sound Coding Translation Wearable Assistive Devices for the Blind functional electrical stimulation Haemodialysis

SLO-2 virtual reality based training system for disabled children

Acoustic Transducers Hearing Quality Wearable tactile display for the fingertip. Sensory assist devices Membrane dialysis

S-9 SLO-1

Information technology, telecommunications,

Electric Electronic Stimulation Cortical implants Sensory assist devices Portable dialysis monitoring and functional parameter

SLO-2 new media in assisting healthcare Hearing Enhancement Retinal implants Slints – materials used Latest use of assistive technology for chronic heart diseases and healthcare

Learning Resources

1. Levine S.N. Advances in Bio-medical engineering and Medical physics, 1st ed., Vol. I, II, IV, Interuniversity publications, 1968.

2. Marion. A. Hersh, Michael A. Johnson, Assistive Technology for visually impaired and blind, 1st ed., Springer Science & Business Media, 2010

3. Kopff W.J, Artificial Organs, 1st ed., John Wiley and Sons, 1976 4. Daniel Goldstein, Mehmet Oz, Cardiac assist Devices, Wiley, 2000 5. Kenneth J. Turner, Advances in Home Care Technologies: Results of the match Project, 1st ed., Springer, 2011

6. Albert M.Cook, Webster J.G, Therapeutic Medical Devices, Prentice Hall Inc.,1982 7. Gerr .M. Craddock Assistive Technology-Shaping the future, 1st ed., IOS Press, 2003 8. Brownsell, Simon, et al,. A systematic review of lifestyle monitoring technologies, Journal of

telemedicine and telecare 17.4 (2011): 185-189 9. Yadin David, Wolf W. von Maltzahn, Michael R. Neuman, Joseph.D, Bronzino, Clinical

Engineering, 1st ed., CRC Press, 2010 10. Pascal Verdonck, Advances in Biomedical Engineering, 1st ed., Elsevier, 2009

Learning Assessment

Bloom’s

Level of Thinking


CLA – 1 (10%) CLA – 2 (15%) CLA – 3 (15%) CLA – 4 (10%)#


Level 1 Remember

40 % - 30 % - 30 % - 30 % - 30% - Understand

Level 2 Apply

40 % - 40 % - 40 % - 40 % - 40% - Analyze

Level 3 Evaluate

20 % - 30 % - 30 % - 30 % - 30% - Create

Total 100 % 100 % 100 % 100 % 100 %


Course Designers


1. Sathyanarayanan J, Mindray Medical India Pvt Ltd, [email protected] 1. Dr. S. Poonguzhali, Anna University, [email protected] 1. Mrs. Lakshmi Prabha, SRMIST

2. Mr. Anuj Kumar, Bombardier Transportation, Ahmedabad, [email protected] 2. Dr. Meenakshi, Professor of ECE, CEG, Anna University, [email protected] 2. Dr. U. Snekhalatha, SRMIST



Course Code


QUALITY CONTROL FOR BIOMEDICAL DEVICES Course


L T P C

3 0 0 3


Nil Co-requisite

Courses Nil

Progressive Courses

Nil




CLR-1 : Utilize Quality, Quality control measures essential for an organization 1 2 3 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

CLR-2 : Utilize the quality management principles and good management practices

Leve

l of T

hink

ing

(Blo

om)

Exp

ecte

d P

rofic

ienc

y (%

)

Exp

ecte

d A

ttain

men

t (%

)

Eng

inee

ring

Kno

wle

dge

Pro

blem

Ana

lysi

s

Des

ign

& D

evel

opm

ent

Ana

lysi

s, D

esig

n, R

esea

rch

Mod

ern

Too

l Usa

ge

Soc

iety

& C

ultu

re

Env

ironm

ent &

Sus

tain

abili

ty

Eth

ics

Indi

vidu

al &

Tea

m W

ork

Com

mun

icat

ion

Pro

ject

Mgt

. & F

inan

ce

Life

Lon

g Le

arni

ng

PS

O-1

: Pro

blem

Sol

ving

at t

he

inte

rfac

e of

Eng

g. &

Med

icin

e P

SO

-:2:

Des

ign

& D

evel

op

Med

ical

Dev

ices

P

SO

-3: m

ultid

isci

plin

ary

rese

arch

for

heal

th c

are

solu

.

CLR-3 : Utilize the various quality control tools

CLR-4 : Utilize the various quality management tools

CLR-5 : Analyze the various standards applicable to healthcare globally and nationally CLR-6 : Implement the global standards in healthcare


CLO-1 : Analyze the underlying concepts of quality and quality control concepts of an organization 2 85 75 - - - - - - - - - - - L - - L

CLO-2 : Evaluate the various quality management principles and good management practices 3 85 75 L - - - - - - - - - - - - - L CLO-3 : Evaluate various tools of quality control 3 85 75 M - - - - - - - - - - - - - -

CLO-4 : Analyze the various quality management tools 3 85 75 L - - - - - - - - - - - - - L

CLO-5 : Analyze the various standards applicable to healthcare globally and nationally 3 85 75 - - - - - - - - - - - - - - -

CLO-6 : Analyze the outcomes of implementing global standards 3 85 75 M - - - - - - - - - - L - - L

Duration (hour)

Introduction to quality TQM principles Statistical process control TQM tools Quality systems

9 9 9 9 9

S-1 SLO-1 Definition of Quality

Customer satisfaction – Customer Perception of Quality

The seven tools of quality Benchmarking ISO 9000 Systems

SLO-2 Dimensions of Quality Customer Complaints Cause-and-effect diagram Reasons to Benchmark ISO 9000 Systems

S-2 SLO-1 Quality Planning Service Quality Check sheet Benchmarking Process

ISO 9000:2000 Quality System – Elements

SLO-2 Quality Planning Customer Retention Check sheet Benchmarking Process ISO 9000:2000 Quality System – Elements

S-3 SLO-1 Quality costs Employee Involvement Control chart Quality Function Deployment (QFD) Need for Accreditation of hospitals

SLO-2 Quality costs Motivation Control chart Quality Function Deployment (QFD) Need for Accreditation of hospitals

S-4 SLO-1

Basic concepts of Total Quality Management

Empowerment Histogram House of Quality FDA Regulations

SLO-2 Principles of TQM Teams and Team Work Histogram House of Quality FDA Regulations

S-5 SLO-1 Leadership – Concepts Recognition and Reward Pareto chart QFD Process - Benefits Joint Commission

SLO-2 Role of Senior Management Performance Appraisal Pareto chart QFD Process - Benefits Joint Commission

S-6 SLO-1 Quality Council Juran Trilogy Scatter diagram Total Productive Maintenance (TPM) – Concept

Regulatory Bodies of India


SLO-2 Quality Statements Juran Trilogy Scatter diagram Total Productive Maintenance Medical Council of India

S-7 SLO-1 Strategic Planning PDSA Cycle Stratification Improvement Needs Pharmacy Council Of India

SLO-2 Strategic Planning PDSA Cycle Stratification Improvement Needs Pharmacy Council Of India

S-8 SLO-1 Deming Philosophy Kaizen Six sigma FMEA Indian Nursing Council

SLO-2 Deming Philosophy Kaizen Six sigma FMEA Indian Nursing Council

S-9 SLO-1 Barriers to TQM Implementation 5S Six sigma Stages of FMEA Dental Council of India

SLO-2 Barriers to TQM Implementation 5S Six sigma Stages of FMEA Homeopathy Central Council

Learning Resources

1. Rose J.E, Total Quality Management, Kogan Page Ltd., 1993 2. Cesar A. Cacere, Albert Zana,The Practise of clinical Engineering, Academic Press,1997 3. Greg Bounds, Beyond Total Quality Management-Toward the emerging paradigm, McGraw

Hill, 2013

4. Joseph J.Carr, Elements of Electronics Instrumentation and Measurement, 2nd ed., Pearson Education, 2003 5. Jerrold T. Bushberg, John M. Boone, The essential physics of medical imaging, 3rd ed., Lippincott Williams &

Wilkins, 2011

Learning Assessment

Bloom’s

Level of Thinking


CLA – 1 (10%) CLA – 2 (15%) CLA – 3 (15%) CLA – 4 (10%)#


Level 1 Remember

40 % - 30 % - 30 % - 30 % - 30% - Understand

Level 2 Apply

40 % - 40 % - 40 % - 40 % - 40% - Analyze

Level 3 Evaluate

20 % - 30 % - 30 % - 30 % - 30% - Create

Total 100 % 100 % 100 % 100 % 100 %


Course Designers


1. Sathyanarayanan J, Mindray Medical India Pvt Ltd, [email protected] 1. Dr. S. Poonguzhali, Anna University, [email protected] 1. Dr. D. Kathirvelu, SRMIST

2. Mr. Anuj Kumar, Bombardier Transportation, Ahmedabad, [email protected] 2. Dr. Meenakshi, Professor of ECE, CEG, Anna University, [email protected] 2. Dr. D. Ashok Kumar, SRMIST



Course Code


SPORTS BIOMECHANICS Course


L T P C

3 0 0 3


18ECE267J Co-requisite

Courses Nil

Progressive Courses

Nil



Learning


CLR-1 : Understand the fundamental muscle action and locomotion in biomechanical point of view 1 2 3 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 CLR-2 : Get an idea about the movement patterns and causes of movements

Leve

l of T

hink

ing

(Blo

om)

Exp

ecte

d P

rofic

ienc

y (%

)

Exp

ecte

d A

ttain

men

t (%

)

Eng

inee

ring

Kno

wle

dge

Pro

blem

Ana

lysi

s

Des

ign

& D

evel

opm

ent

Ana

lysi

s, D

esig

n, R

esea

rch

Mod

ern

Too

l Usa

ge

Soc

iety

& C

ultu

re

Env

ironm

ent &

Sus

tain

abili

ty

Eth

ics

Indi

vidu

al &

Tea

m W

ork

Com

mun

icat

ion

Pro

ject

Mgt

. & F

inan

ce

Life

Lon

g Le

arni

ng

PS

O-1

: Pro

blem

Sol

ving

at t

he

inte

rfac

e of

Eng

g. &

Med

icin

e P

SO

-:2:

Des

ign

& D

evel

op

Med

ical

Dev

ices

P

SO

-3: m

ultid

isci

plin

ary

rese

arch

for

heal

th c

are

solu

.

CLR-3 : Understand the qualitative and quantitative analysis of sports movements

CLR-4 : Acquire an idea about the basic concept of jumping & aerial movement and throwing & hitting

CLR-5 : Get an idea about the injury prevention, rehabilitation and special Olympic sports

CLR-6 : Get an overall idea about the applications of biomechanics in sports


CLO-1 : Illustrate the muscle action in sport and locomotion 1 80 70 M L

CLO-2 : Analyze the movement patterns and its causes 1,2 80 70 M M

CLO-3 : Describe the Qualitative and Quantitative analysis of sports movements 2 80 70 M M CLO-4 : Analyze the movement of action such as jumping, throwing, hitting and aerial movement 2 80 70 L L L L

CLO-5 : Identify the injury scenario and special Olympic sports 2 80 70 L L L

CLO-6 : Outline the major concepts in sports biomechanics

Duration (hour)

Muscle Action in Sport and Exercise and locomotion- Biomechanical view

Movement patterns and its causes Qualitative and Quantitative analysis of sports movements

Jumping and Aerial Movement, Throwing and Hitting

Injury Prevention, Rehabilitation and Special Olympic Sports

9 9 9 9 9

S-1 SLO-1 Introduction to Biomechanics Introduction to Movement patterns

Introduction to Analysis of Sport Movements

Introduction to Aerial movement Mechanisms of Musculoskeletal Injury

SLO-2 Applications of Biomechanics Defining human movements A structured analysis framework Types of Aerial Movement - Rotation during flight, Motion of the mass centre

Musculoskeletal Loading During Landing

S-2

SLO-1 Neural Contributions to Changes in Muscle Strength

Fundamental movements-Walking, Running

Preparation stage Types of Aerial Movement : Somersaulting, Twisting,

Sport-Related Spinal Injuries and their Prevention

SLO-2 Mechanical Properties and Performance in Skeletal Muscles

Fundamental movements-Throwing, Jumping

Observation stage Control of aerial movement Sport-Related Spinal Injuries and their Prevention

S-3

SLO-1 Muscle-Tendon Architecture qualitative and quantitative movement Evaluation and diagnosis stage Introduction : High Jump Impact Propagation and its Effects on the Human Body

SLO-2 Athletic Performance Comparison of qualitative and quantitative movement analysis

Intervention stage – providing appropriate feedback

Techniques of Jumping -

Skating, Springboard and Platform Diving

Impact Propagation and its Effects on the Human Body

S-4 SLO-1

Eccentric Muscle Action in Sport and Exercise

Movement patterns-geometry of motion Identifying critical features of a movement Determinants of Successful Ski-Jumping Performance

Neuromechanics of the Initial Phase of Eccentric Contraction

SLO-2 Stretch–Shortening Cycle of Muscle Function

Fundamentals of movement Identifying critical features of a movement Determinants of Successful Ski-Jumping Performance

Induced Muscle Injury


S-5 SLO-1 Biomechanical Foundations of Strength Linear motion and the centre of mass

The use of videography in recording sports movements

Principles of Throwing Manual Wheelchair Propulsion

SLO-2 Power Training The geometry of angular motion and the coordination of joint rotations

The use of videography in recording sports movements

The Flight of Sports Projectiles

S-6 SLO-1

Factors Affecting Preferred Rates of Movement in Cyclic Activities

Forces in sport Recording the movement Javelin Throwing: an Approach to Performance Development

Sports after Amputation SLO-2 The Dynamics of Running

Combinations of forces on the sports performer

Experimental procedures -Two dimensional videography

S-7 SLO-1 Resistive Forces in Swimming Momentum and the laws of linear motion

Experimental procedures -Three dimensional videography

Shot Putting Biomechanics of Dance

SLO-2 Propulsive Forces in Swimming

Force–time graphs as movement patterns Data processing Hammer Throwing: Problems and Prospects

S-8

SLO-1 Performance-Determining Factors in Speed Skating

Determination of the centre of mass of the human body

Projectile motion Hammer Throwing: Problems and Prospects

Biomechanics of Martial arts SLO-2

Cross-Country Skiing: Technique

Fundamentals of angular kinetics and Generation and control of angular momentum

Linear velocities and accelerations caused by rotation

Hitting

S-9 SLO-1

Cross-Country Skiing: Equipment

Measurement of force Rotation in three-dimensional space Kicking Biomechancis of YOGA

SLO-2 Factors Affecting Performance Measurement of pressure Rotation in three-dimensional space Simple concept problems

Learning Resources

1. Susan J Hall, “Basic Biomechanics”, McGraw-Hill Higher Education, 7th edition, 2014 2. Vladimir M. Zatsiorsky, Biomechanics in Sports: Performance Enhancement and Injury

Prevention, 1st ed., Blackwell Science Ltd, 2000

3. Jules Mitchell,”Yoga Biomechanics”, 1 edition , Handspring Publishing Limited ,2018 4. Roger Bartlett, Introduction to Sports Biomechanics: Analysing Human Movement Patterns, 2nd ed., Routledge,

2007

Learning Assessment

Bloom’s

Level of Thinking


CLA – 1 (10%) CLA – 2 (15%) CLA – 3 (15%) CLA – 4 (10%)#


Level 1 Remember

40 % - 40 % - 40 % - 30 % - 30% - Understand

Level 2 Apply

40 % - 40 % - 40 % - 40 % - 40% - Analyze

Level 3 Evaluate

20 % - 20 % - 20 % - 30 % - 30% - Create

Total 100 % 100 % 100 % 100 % 100 %


Course Designers


1. Sathyanarayanan J, Mindray Medical India Pvt Ltd, [email protected] 1. Dr. S. Poonguzhali, Anna University, [email protected] 1. Ms. Oinam Robita Chanu, SRMIST

2. Mr. Anuj Kumar, Bombardier Transportation, Ahmedabad, [email protected] 2. Dr. Meenakshi, Professor of ECE, CEG, Anna University, [email protected] 2. Dr .D. Ashok kumar, SRMIST

. Mr. Hariharasudhan - Johnson Controls, Pune, [email protected] 3. Dr. Venkatesan, Sr. Scientist, NIOT, Chennai, [email protected]


Course Code


VIRTUAL INSTRUMENTATION Course


L T P C

2 0 2 3


Nil Co-requisite

Courses Nil

Progressive Courses

Nil



Learning


CLR-1 : Study the concepts of Virtual instrumentation and to learn the programming concepts in VI. 1 2 3 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

CLR-2 : Study about the various real time data acquisition methods.

Leve

l of T

hink

ing

(Blo

om)

Exp

ecte

d P

rofic

ienc

y (%

)

Exp

ecte

d A

ttain

men

t (%

)

Eng

inee

ring

Kno

wle

dge

Pro

blem

Ana

lysi

s

Des

ign

& D

evel

opm

ent

Ana

lysi

s, D

esig

n, R

esea

rch

Mod

ern

Too

l Usa

ge

Soc

iety

& C

ultu

re

Env

ironm

ent &

Sus

tain

abili

ty

Eth

ics

Indi

vidu

al &

Tea

m W

ork

Com

mun

icat

ion

Pro

ject

Mgt

. & F

inan

ce

Life

Lon

g Le

arni

ng

PS

O 1

: Aut

omat

ic c

ontr

ol f

or

cont

inou

s &

dis

cret

e sy

stem

s P

SO

-2: U

tiliz

e P

LC &

DC

S fo

r co

ntro

l of s

yste

ms

PS

O-3

: Effe

ctiv

e

man

agem

ent s

kills

CLR-3 : Study about the various Instrument Interfacing concepts.

CLR-4 : To study the programming techniques for various control techniques using VI software

CLR-5 : To study various analysis tools for Process control applications.

CLR-6 : To study various real time measurement systems


CLO-1 : An ability to understand the purpose of virtual instrumentation and understand the construction of VI 1,2 80 70 H H

CLO-2 : An ability to understand and apply various data acquisition methods. 2 85 75 H H H

CLO-3 : An ability to understand and implement the available interfacing instruments 2 75 70 H H H H H H H H

CLO-4 : An ability to understand and implement various control techniques using VI software 2,3 85 80 H H H H H H H

CLO-5 : An ability to understand and develop a program foran engineering application. 2,3 85 75 H H H H H H H H H H H

CLO-6 : An ability to understand and implement various measurement systems 2,3 80 70 H H H H H H H H H H H

Duration (hour) Learning Unit / Module 1 Learning Unit / Module 2 Learning Unit / Module 3 Learning Unit / Module 4 Learning Unit / Module 5

12 12 12 12 12

S-1

SLO-1 Historical perspective, Need of VI, Advantages of VI, Virtual Instruments versus Traditional Instruments

A/D Converters, Organization of the DAQ VI system -

Introduction to PC Buses Introduction to Non continuous controllers in LabVIEW

PC based digital storage oscilloscope

SLO-2

Review of software in Virtual Instrumentation ,Software environment Architecture of VI, Introduction to the block diagram and Front panel Pallets

D/A Converters, Types of D/A

Local Buses-ISA, PCI, Introduction to continuous controllers in LabVIEW

Sensor Technology

S-2

SLO-1 Creating and saving a VI, Front Panel Tool Bar, Block diagram Tool Bar, Palettes

plug-in Analog Input/output cards - Digital Input and Output Cards,

RS232, RS422 Design of ON/OFF controller Applications of sensor Technology

SLO-2

Creating sub VI, Creating an ICON, Building a connector pane, Displaying VI’S, Placing and Saving Sub VI’S on block diagram, Example of full adder circuit using half adder circuit

Organization of the DAQ VI system - RS485 Proportional controller for a mathematically described processes using VI software

Signal processing Techniques

S-3 SLO-1 Lab-1: Front Panel controls and Indicator

Lab-12: Measurement of diode I-V characteristics using LabVIEW Lab-17: Load cell Data acquisition

using RS232

Lab-22: On-off temperature controller using LabVIEW

Lab-28: Design of DSO SLO-2

Lab-2: Verification of Arithmetic Operations

S-4 SLO-1 Lab-3: Verification of Half Adder Lab-13: Temperature measurement using

LabVIEW and DAQ hardware. Lab-23: Continuous Control of temperature using LabVIEW

Lab-29: Analysis of different signal Filters using LabVIEW SLO-2 Lab-4: Verification of Full adder.

S-5 SLO-1 Loops-For Loop, Opto Isolation need Interface Buses-USB,PXI Modeling of level process Spectrum Analyzer


SLO-2 While Loop Performing analog input and analog output VXI, Basic control of level process in LabVIEW Waveform Generator

S-6 SLO-1 Arrays, Scanning multiple analog channels SCXI Modeling of Reactor Processes

Data visualization from multiple locations

SLO-2 Clusters, plotting data Issues involved in selection of Data acquisition cards

PCMCIA Basic control of Reactor process in LabVIEW

Distributed monitoring and control

S-7 SLO-1

Lab-5: Program to find Addition of First n natural numbers using for loop

Lab-14: Flow measurement in water using LabVEW and DAQ hardware

Lab-18: DC motor control using VXI Lab-24: On-off Level controller using LabVIEW

Lab-30: Real time spectrum analysis using LabVIEW

SLO-2 Lab-6: Program to find Addition of First n odd numbers using while loop.

S-8 SLO-1

Lab-7: Implementation of Array functions. Lab-19: GPIB with VISA functions

Lab-25: Continuous Control of pressure controller using LabVIEW

Lab-31: Arbitratory Waveform Generator using LabVIEW

SLO-2 Lab-8: Calculation of BMI using cluster

S-9 SLO-1 Charts

Data acquisition modules with serial communication

Instrumentation Buses - Modbus and GPIB

Case studies on development of HMI in VI Vision and Motion Control

SLO-2 Graphs Design of digital voltmeters with transducer input

Networked busses – ISO/OSI Case studies on development of HMI in VI Examples on Integrating Measurement with vision and motion

S-10 SLO-1 Case and Sequence Structures Timers and Counters Reference model,

Case studies on development of SCADA in VI NI Motion control

SLO-2 Formula nodes, String and File Input/Output.

Timers and Counters Ethernet and TCP / IP Protocols Case studies on development of SCADA in VI Speed control system

S-11 SLO-1

Lab-9: Monitoring of temperature using Charts and Graphs Lab-15: Design of digital voltmeters with

transducer input using LabVIEW Lab-20: Online temperature control using LabVIEW using TCP/IP

Lab-26: On-off pressure controller using LabVIEW

Lab-32: Minor Project SLO-2 Lab-10: Program for implementing Seven segment display

S-12 SLO-1 Lab-11: Program to perform Traffic light

control Lab-16: Pressure measurement using LabVEW and DAQ hardware DAQ.

Lab-21: Online temperature control using Web publishing tool

Lab-27: Continuous Control of pressure controller using LabVIEW SLO-2

Learning Resources

1. Nadovich, C., Synthetic Instruments Concepts and Applications, Elsevier, 2005 2. Bitter, R., Mohiuddin, T. and Nawrocki, M., Labview Advanced Programming Techniques, 2nd ed., CRC Press, 2007 3. Gupta, S. and Gupta, J. P., PC Interfacing for Data Acquisition and Process Control”, 2nd ed., Instrument Society of

America, 1994

4. Jamal, R., Picklik, H., Labview – Applications and Solutions, National Instruments Release. 5. Johnson, G., Labview Graphical programming, McGraw-Hill, 1997 6. Wells, L.K., Travis, J., Labview for Everyone, Prentice Hall, 1997 7. Buchanan, W., Computer Busses, CRC Press, 2000

Learning Assessment

Bloom’s

Level of Thinking


CLA – 1 (10%) CLA – 2 (15%) CLA – 3 (15%) CLA – 4 (10%)#


Level 1 Remember

20% 20% 15% 15% 15% 15% 15% 15% 15% 15% Understand

Level 2 Apply

20% 20% 20% 20% 20% 20% 20% 20% 20% 20% Analyze

Level 3 Evaluate

10% 10% 15% 15% 15% 15% 15% 15% 15% 15% Create

Total 100 % 100 % 100 % 100 % 100 %


Course Designers


1. D. Karthikeyan, Controlsoft Engineering India Pvt Ltd, [email protected] 1. Dr. J. Prakash, MIT, Chennai, [email protected] 1. Dr. K. A. Sunitha, SRMIST

2. V. Venkateswaran, Instrumentation Consultant, [email protected] 2. Dr. D. Nedumaran, Madras University, [email protected] 2. Mrs. A. Brindha, SRMIST


Course Code


ANALYTICAL INSTRUMENTATION Course


L T P C

3 0 0 3


Nil Co-requisite

Courses Nil

Progressive Courses

Nil



CLR-1 : Understand the principle and theory of analytical instruments 1 2 3 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

CLR-2 : Understand the quantitative analysis of dissolved components

Leve

l of T

hink

ing

(Blo

om)

Exp

ecte

d P

rofic

ienc

y (%

)

Exp

ecte

d A

ttain

men

t (%

)

Eng

inee

ring

Kno

wle

dge

Pro

blem

Ana

lysi

s

Des

ign

& D

evel

opm

ent

Ana

lysi

s, D

esig

n, R

esea

rch

Mod

ern

Too

l Usa

ge

Soc

iety

& C

ultu

re

Env

ironm

ent &

Sus

tain

abili

ty

Eth

ics

Indi

vidu

al &

Tea

m W

ork

Com

mun

icat

ion

Pro

ject

Mgt

. & F

inan

ce

Life

Lon

g Le

arni

ng

PS

O 1

: Aut

omat

ic c

ontr

ol f

or

cont

inou

s &

dis

cret

e sy

stem

s P

SO

-2: U

tiliz

e P

LC &

DC

S fo

r co

ntro

l of s

yste

ms

PS

O-3

: Effe

ctiv

e m

anag

emen

t

skill

s

CLR-3 : Study the concept of separation science and its applications

CLR-4 : Study the various spectroscopic techniques and its instrumentation

CLR-5 : Identify and solve engineering problems associated with Radiation Techniques CLR-6 : Understand the working of Analytical Instrument and their importance in industries


CLO-1 : Apply the principles and theory of instrumental analysis 1,2 80 70 H H L L H H H H H L

CLO-2 : Apply the principles of various chemical analysis instruments in industries 1,2 85 75 H H L L H H H H L CLO-3 : Analyze and understand the operation of various radio chemical methods of analysis 1,2 75 70 H H L L H H H H L

CLO-4 : To analyze and understand the operation of instruments based on optical properties 1,2 85 80 H H L L H H H H L

CLO-5 : To identify and solve engineering problems associated with Radiation Techniques 1,2 85 75 H H L L H H H H L

CLO-6 : To understand the working of analytical Instruments in industries 1,2 80 70 H H L L H H H H L

Duration (hour) Learning Unit / Module 1 Learning Unit / Module 2 Learning Unit / Module 3 Learning Unit / Module 4 Learning Unit / Module 5

9 9 9 9 9

S-1 SLO-1

Introduction to Chemical instrumental analysis

Dissolved oxygen analyzer, Importance of measuring dissolved oxygen in Industry, Principle working

Chromatography, Importance, Basic working of Chromatography

Spectral methods of analysis- Properties or parameters of electromagnetic radiation

NMR spectrometers ,Importance and basic working of NMR Spectroscopy

SLO-2 Spectral method of analysis

Working of Dissolved oxygen analyzer Gas chromatography Instrumentation

Electromagnetic spectrum Types of spectrometers

Magnetic assembly, Probe unit, Instrument stabilization

S-2 SLO-1

Electro analytical and seperative methods

sodium analyzer, Importance of measuring sodium in Industry, Principle working

Basic parts of a gas chromatography Beer's law UV-visible spectrophotometers Transmittance and absorbance

Types of NMR spectrometer, Minimal type

SLO-2 Instrumental methods of analysis-basic components and their classification

Working of sodium analyzer Carrier gas supply Sample injection system

Beer’s law Application of beer’s law

Multipurpose NMR,Wideline

S-3 SLO-1 Sampling systems

Silica analyzer, Importance of measuring Silica in Industry, Principle working

Chromatographic column, Selection of column

Derivations of beer’s law Applications of NMR Spectrometer

SLO-2 Importance of Sampling system in chemical Industries and Safety aspects

Working of Silica Analyzer Thermal compartment, Detection system, Recording system

Single beam and double beam instruments Mass Spectrometers, Basic working and Importance

S-4

SLO-1 PH Measurement, Principle of PH measurement & Importance of PH measurement in Industries

Moisture measurement Importance of Moisture measurement

Liquid chromatography-Principles, types and applications

IR spectrophotometers Instruments of IR

Components of Mass Spectrometers

SLO-2 Types of Electrodes, Reference Electrodes and types

Types of Moisture measurement High pressure liquid chromatography Types of IR Components required for three types of IR

Types of Mass spectrometers Magnetic Sector analyzer, Double focusing spectrometers

S-5 SLO-1 Secondary Electrodes and Types Oxygen analyzer Methods of oxygen analyzers and importance

Instrumentation or basic component of HPLC

Instruments of dispersive instrument , IR Radiation Sources and types

Time of flight analyzers, Quadrupole Mass analyzers


SLO-2 Indicator electrodes Paramagnetic oxygen analyzer Electro analytical method

Solvent reservoir and its treatment system

Importance of Monochromators and types of Monochromators

Application of mass spectrophotometers

S-6

SLO-1 pH meters direct reading type pH meter null detector type pH meter

CO monitor,Importance of measuring CO Pumping system, Types of working systems and Importance

Samples And Sample Cells detectors

nuclear radiation detectors, importance of measurement

SLO-2

ion selective electrodes Types of ion selective electrodes Glass membrane electrodes Liquid membrane electrodes Solid membrane Electrodes

Types of CO monitor Pulse dampers FTIR spectrometers, Main components Advantages, disadvantages

GM counter

S-7 SLO-1

Biosensors Features of Biosensor Block diagram of bio sensor

NO2 analyzer, Importance of NO2

measurement

Sample injection system and types

Types of sources Selection factors

Working setup, advantages of GM Counter

SLO-2 Applications of Biosensors in industries Types of NO2 measurement Liquid chromatographic column working , Types of Column thermostats

Types of detectors Selection factors

proportional counter, Basic Principle

S-8 SLO-1

conductivity meters ,Importance in Chemical Industries

H2S analyzer, Importance of H2 S Measurement

Detection system types atomic absorption spectrophotometer instruments for atomic absorption spectroscopy

Working setup, advantages of GM Counter

SLO-2 Types of Conductivity meters Types of H2S measurement Types of Recording system radiation source chopper

solid state detectors, Basic Principle

S-9

SLO-1 Air pollution Monitoring Instruments Dust and smoke measurement- dust measurement and Importance Types of dust measurement

Application of HPLC, Advantages of HPLC over gas chromatography

production of atomic vapor by flame, Parts by flame photometer Emission system

Working setup, advantages of Solid state detectors

SLO-2 Estimation of Air pollution Thermal analyzer , Importance of Thermal analyzers, Types of Thermal analyzer

Detectors types, Factors Influencing the Selection of Detectors

Monochromators And types, Types of Detectors and recording systems and their selection criteria

scintillation counter, Basic principle

Learning Resources

1. Khandpur. R.S, “Handbook of Analytical Instruments”, Tata McGraw Hill publishing Co. Ltd., 2006 2. Bella. G, Liptak, “Process Measurement and analysis”., CRC press LLC.,2003. 3. Francis Rousseau and Annick Rouesssac “Chemical analysis Modern Instrumentation Methods and

Techniques”, John wiley & sons Ltd.2007.

4. James W.Robinson,“Undergraduate Instrumental Analysis”, Marcel Dekker., 2005. 5. Dwayne Heard, “Analytical Techniques for atmospheric measurement”, Blackwell Publishing,

2006.

Learning Assessment

Bloom’s

Level of Thinking


CLA – 1 (10%) CLA – 2 (15%) CLA – 3 (15%) CLA – 4 (10%)#


Level 1 Remember

40 % - 30 % - 30 % - 30 % - 30% - Understand

Level 2 Apply

40 % - 40 % - 40 % - 40 % - 40% - Analyze

Level 3 Evaluate

20 % - 30 % - 30 % - 30 % - 30% - Create

Total 100 % 100 % 100 % 100 % 100 %


Course Designers


1. D. Karthikeyan, Controlsoft Engineering India Pvt Ltd, [email protected] 1. Dr. J. Prakash, MIT, Chennai, [email protected] Dr. K. A. Sunitha, SRMIST

2. V. Venkateswaran, Instrumentation Consultant, [email protected] 2. Dr. D. Nedumaran, Madras University, [email protected] Mrs. A. Brindha, SRMIST


Course Code 18ECO133T Course Name SENSORS AND TRANSDUCERS Course


L T P C

3 0 0 3


Nil Co-requisite

Courses Nil

Progressive Courses

Nil

Course Offering Department Electronics and Instrumentation Engineering Data Book / Codes/Standards Nil


CLR-1 : Gain knowledge on classification, and characteristics of transducers 1 2 3 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

CLR-2 : Acquire the knowledge of different types of inductive and capacitive sensors

Leve

l of T

hink

ing

(Blo

om)

Exp

ecte

d P

rofic

ienc

y (%

)

Exp

ecte

d A

ttain

men

t (%

)

Eng

inee

ring

Kno

wle

dge

Pro

blem

Ana

lysi

s

Des

ign

& D

evel

opm

ent

Ana

lysi

s, D

esig

n, R

esea

rch

Mod

ern

Too

l Usa

ge

Soc

iety

& C

ultu

re

Env

ironm

ent &

Sus

tain

abili

ty

Eth

ics

Indi

vidu

al &

Tea

m W

ork

Com

mun

icat

ion

Pro

ject

Mgt

. & F

inan

ce

Life

Lon

g Le

arni

ng

PS

O 1

: Aut

omat

ic c

ontr

ol f

or

cont

inuo

us&

dis

cret

e sy

stem

s

PS

O-2

: Util

ize

PLC

& D

CS

for

cont

rol o

f sys

tem

s

PS

O-3

: Effe

ctiv

e m

anag

emen

t

skill

s

CLR-3 : Acquire the knowledge of different types of thermal and radiation sensors

CLR-4 : Acquire the knowledge of different types of magnetic sensors

CLR-5 : Acquire the knowledgeof different types of sensors measuring non-Electrical quantity

CLR-6 : Locate the Applications of sensors in industries and home appliances


CLO-1 : To demonstrate the various types of basic sensors. 2,3 80 80 H - H - - H H H - - - H H - -

CLO-2 : Understand the inductive and capacitive sensors which are used for measuring various parameters.

1,2 80 80 H - - H - H - - - - - H - H -

CLO-3 : Understand the thermal and radiation sensors 1 80 80 - - - - - H - - H H - - H - -

CLO-4 : Have an adequate knowledge on the various magnetic sensors 3 80 80 - H H - - - - - - - - - - H -

CLO-5 : To demonstrate the various types of basic sensors measuring non electrical quantity 3 80 80

- - H - H - - - - - - H - - H

CLO-6 : Select the right transducer for the given application 3 80 80 H - H - - H H H - - - H H - -


S-1 SLO-1

Introduction to sensors/ transducers, Principles

Introduction to Inductive sensor Thermal sensors: Introduction Magnetic sensors: Introduction Measurement of Non-Electrical quantity: Introduction

SLO-2 Classification based on different criteria Sensitivity and linearity of the sensor Thermal Expansion type. Villari effect Flow Measurement – Introduction.

S-2 SLO-1 Characteristics of measurement systems Transformer type transducer Acoustics temperature sensors. Wiedmann effect Ultrasonic Flow Meters.

SLO-2 Static characteristics Accuracy, Precision, Resolution, Sensitivity

Electromagnetic transducer Thermo-emf sensor. Hall effect Hot Wire Anemometers.

S-3 SLO-1 Dynamic characteristics. Magnetosrtictive transducer Materials for thermos-emf sensors. Construction, Electromagnetic Flow meters.

SLO-2 Environmental Parameters Materials used in inductive sensor Thermocouple construction performance characteristics, Principle and types.

S-4 SLO-1 Characterization and its type Mutual Inductance change type Types. and its Application Measurement of Displacement.

SLO-2 Electrical characterization. LVDT: Construction. Thermo-sensors using semiconductor device

Introduction to smart sensors Introduction and types.

S-5 SLO-1 Mechanical Characterization. Material, input output relationship, Pyroelectric thermal sensors Film sensors: Introduction Measurement of Velocity/ Speed.

SLO-2 Thermal Characterization Synchros-Construction Introduction Thick film sensors Introduction and types.

S-6 SLO-1 Optical Characterization. Capacitive sensor: Introduction characteristics Microelectromechanical systems Measurement of Liquid Level.

SLO-2 Errors and its classification. Parallel plate capacitive sensor Application Micromachining. Introduction and types.

S-7 SLO-1 Selection of transducers. Variable thickness dielectric capacitive sensor

Radiation sensors. Nano sensors Measurement of Pressure.


SLO-2 Introduction to mechanical sensors Electrostatic transducer Introduction Applications: Industrial weighing systems: Link–lever mechanism.

Introduction and types.

S-8 SLO-1 Resistive potentiometer and types Piezoelectric elements Characteristics

Load cells – pneumatic, elastic and their mounting.

Measurement of Vibration.

SLO-2 Strain gauge: Theory, type, design consideration, sensitivity.

Ultrasonic Sensors Geiger counters different designs of weighing systems. Introduction and types.

S-9 SLO-1

Resistive transducer: RTD, materials used in RTD

Calculation of sensitivity. Scintillation detectors conveyors type. Application of sensors in industries

SLO-2 Thermistor: thermistor material, shape Capacitor microphone, response characteristics

Application on radiation sensors weighfeeder type. Application of sensors in home appliances

Learning Resources

1. Patranabis, D., “Sensors and Transducers”, 2nd Edition, Prentice Hall India Pvt. Ltd, 2010. 2. Doeblin, E.O., “Measurement Systems: Applications and Design”, 6thEdition, Tata McGraw-Hill

Book Co., 2011. 3. Bentley, J. P., “Principles of Measurement Systems”, 4th Edition, Addison Wesley Longman Ltd.,

UK, 2004.

4. Murthy, D.V.S., “Transducers and Instrumentation”, Prentice Hall of India Pvt. Ltd., New Delhi, 2010. 5. Neubert H.K.P., “Instrument Transducers – An Introduction to their performance and Design”, Oxford

University Press, Cambridge, 2003.

Learning Assessment

Bloom’s

Level of Thinking



Level 1 Remember

40 % - 30 % - 30 % - 30 % - 30% - Understand

Level 2 Apply

40 % - 40 % - 40 % - 40 % - 40% - Analyze

Level 3 Evaluate

20 % - 30 % - 30 % - 30 % - 30% - Create

Total 100 % 100 % 100 % 100 % 100 %


Course Designers


1. D. Karthikeyan, Controlsoft Engineering India Pvt Ltd, [email protected] 1. Dr. J. Prakash, MIT, Chennai, [email protected] Mrs. K. Vibha, SRMIST

2. V. Venkateswaran, Instrumentation Consultant, [email protected] 2. Dr. D. Nedumaran, Madras University, [email protected] Dr. G. Joselin Retna Kumar, SRMIST


Course Code


INDUSTRIAL AUTOMATION Course


L T P C

3 0 0 3


Nil Co-requisite

Courses Nil

Progressive Courses

Nil

Course Offering Department Electronics and Communication Data Book / Codes/Standards Nil


CLR-1 : Understand basic components of PLC 1 2 3 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

CLR-2 : Understand the use of timers and counters in process automation

Leve

l of T

hink

ing

(Blo

om)

Exp

ecte

d P

rofic

ienc

y (%

)

Exp

ecte

d A

ttain

men

t (%

)

Eng

inee

ring

Kno

wle

dge

Pro

blem

Ana

lysi

s

Des

ign

& D

evel

opm

ent

Ana

lysi

s, D

esig

n, R

esea

rch

Mod

ern

Too

l Usa

ge

Soc

iety

& C

ultu

re

Env

ironm

ent &

Sus

tain

abili

ty

Eth

ics

Indi

vidu

al &

Tea

m W

ork

Com

mun

icat

ion

Pro

ject

Mgt

. & F

inan

ce

Life

Lon

g Le

arni

ng

PS

O 1

: Aut

omat

ic c

ontr

ol f

or

cont

inou

s &

dis

cret

e sy

stem

s P

SO

-2: U

tiliz

e P

LC &

DC

S fo

r co

ntro

l of s

yste

ms

PS

O-3

: Effe

ctiv

e m

anag

emen

t

skill

s

CLR-3 : Understand DCS architecture

CLR-4 : Understand operator and engineering interface in DCS

CLR-5 : Understand HART signal standard and Field bus CLR-6 : Understand Field bus signal standard.


CLO-1 : Select PLC based on I/O’s 2,3 80 80 H M L - - - - - M - M L M M

CLO-2 : Apply timers and counters in process automation 1,2 80 80 H H H H H - L - H M L L H H H CLO-3 : Select LCU based on application 1 80 80 H M - - - - - - L - - L M L M

CLO-4 : Analyse data’s in Operator displays 3 80 80 H H - H - - - - H M - L H L M

CLO-5 : Interpret industrial data communication modes 3 80 80 H - - - - - - - - L - L H - L

CLO-6 : Gain knowledge on field bus 3 80 80 H L - - - - - - - - - L H - L


S-1

SLO-1 Programmable logic controllers PLC Programming Languages Evolution of DCS Operator Interfaces Requirements Introduction to HART

SLO-2 PLC vs Computer Ladder Diagram Hybrid System Architecture

Process Monitoring Evolution of Signal standard

S-2 SLO-1 Parts of a PLC Functional block Central Computer system Architecture

Process Control HART Networks: Point-to-Point

SLO-2 Architecture Sequential Function Chart DCS Architecture Process Diagnostics Multi-drop

S-3 SLO-1 PLC size and Application. Instruction List Comparison of Architecture Process Record Keeping Split range control valve

SLO-2 Fixed and Modular I/O Structured Text Local Control Unit Architecture Low Level Operator Interface HART Field Controller Implementation

S-4 SLO-1 Discrete Input Modules Wiring Diagram Architectural Parameters High Level Operator Interface Hart Commends: Universal

SLO-2 Discrete Output Modules Ladder logic Program Comparison Of LCU Architecture Hardware Elements In The Operator

Interface Common Practice

S-5 SLO-1 Analog Input Modules On-Delay Timer Instruction LCU Language Requirements Operator Input And Output Devices Device Specific

SLO-2 Analog Output Modules Off-Delay Timer Instruction Function Blocks Operator Display Hierarchy Wireless Hart

S-6 SLO-1 Special I/O Modules Retentive Timer Function Block Libraries Plant-Level Display Field Bus Basics

SLO-2 High Speed Counter Module Cascading Timer Problem-Oriented Language Area- Level Display Field Bus Architecture

S-7 SLO-1 Power Supplies Up-Counter LCU Process Interfacing Issues Group- Level Display Field Bus Standard

SLO-2 Isolators Down-Counter Security Requirements Loop- Level Display Field Bus Topology

S-8 SLO-1 Input/output Devices: Switches Cascading Counters Security Design Approach Engineering Interface Requirements H1 Field Bus

SLO-2 sensors Combining Counter And Timer Functions On-Line Diagnostics Requirement For Operator Interface

Configuration H2 Field Bus

S-9 SLO-1 Relays Math Operation Redundant Controller Design Low Level Engineering Interface, Interoperability

SLO-2 Solenoid valve Program One-On-One, One-On-Many Redundancy High Level Engineering Interfaces Interchangeability


Learning Resources

1. Frank D. Petruzella, Programmable Logic Controller, Tata McGraw Hill Fifth Edition, 2017 2. Bolton. W, Programmable Logic Controllers, 6th Edition, Elsevier Newnes, Sixth Edition 2016. 3. Krishna Kant, Computer Based Industrial Control, Second edition, Prentice Hall of India, New Delhi,2015

4. Bowten, R HART Application Guide, HART Communication foundation, 2015. 5. Berge, J, Field Busses for process control: Engineering, operation, maintenance, ISA press,2015

Learning Assessment

Bloom’s

Level of Thinking


CLA – 1 (10%) CLA – 2 (15%) CLA – 3 (15%) CLA – 4 (10%)#


Level 1 Remember

40 % - 30 % - 30 % - 30 % - 30% - Understand

Level 2 Apply

40 % - 40 % - 40 % - 40 % - 40% - Analyze

Level 3 Evaluate

20 % - 30 % - 30 % - 30 % - 30% - Create


Course Designers


1. D. Karthikeyan, Controlsoft Engineering India Pvt Ltd, [email protected] 1. Dr. J. Prakash, MIT, Chennai, [email protected] Mr. J. Sam Jeba Kumar, SRMIST

2. V. Venkateswaran, Instrumentation Consultant, [email protected] 2. Dr. D. Nedumaran, Madras University, [email protected] Dr. G. Joselin Retna Kumar, SRMIST


Course Code


FUNDAMENTALS OF MEMS Course


L T P C

3 0 0 3


Nil Co-requisite

Courses Nil

Progressive Courses

Nil



Learning


CLR-1 : Understand the importance of micro system technology 1 2 3 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

CLR-2 : Learn the operating principle of various micro sensors and actuators

Leve

l of T

hink

ing

(Blo

om)

Exp

ecte

d P

rofic

ienc

y (%

)

Exp

ecte

d A

ttain

men

t (%

)

Eng

inee

ring

Kno

wle

dge

Pro

blem

Ana

lysi

s

Des

ign

& D

evel

opm

ent

Ana

lysi

s, D

esig

n, R

esea

rch

Mod

ern

Too

l Usa

ge

Soc

iety

& C

ultu

re

Env

ironm

ent &

Sus

tain

abili

ty

Eth

ics

Indi

vidu

al &

Tea

m W

ork

Com

mun

icat

ion

Pro

ject

Mgt

. & F

inan

ce

Life

Lon

g Le

arni

ng

PS

O 1

: Aut

omat

ic c

ontr

ol f

or

cont

inuo

us&

dis

cret

e sy

stem

s P

SO

-2: U

tiliz

e P

LC &

DC

S fo

r co

ntro

l of s

yste

ms

PS

O-3

: Effe

ctiv

e m

anag

emen

t

skill

s

CLR-3 : Impart the applications of various micro fabrication techniques

CLR-4 : Understand the differences and need for microfabrication CLR-5 : Operate MEMS design tools to design simple micro devices

CLR-6 : Understand recent developments and challenges in MEMS


CLO-1 : Appreciate the fundamental concepts in MEMS technology 2,3 80% 80% H - - - - H - - - - - H H - H CLO-2 : Understand the fabrication and machining techniques of MEMS devices 1,2 80% 80% H - - - - H - - - - - H - - H

CLO-3 : Familiarize with the concepts of packaging of MEMS devices 1 80% 80% H - - H - H - - - - - H H - H

CLO-4 : Appreciate the significance of micro fabrication processes 3 80% 80% H - - H - - - - - - - H - - H

CLO-5 : Design and Simulate simple structures using MEMS software 3 80% 80% H - H H H - - H H - - H H - H

CLO-6 : Analyze recent trends and developments in MEMS technology 3 80% 80% H - - H - - - - - - - H H - H

Duration (hour)

Introduction Fabrication overview Micromachining Bonding & Sealing Recent trends

9 9 9 9 9

S-1 SLO-1

Introduction to MEMS and Brief recap of Macro devices

Introduction to Micro fabrication process Introduction of micro machining(MMC) process

Introduction to MEMS packaging Introduction to design tools and simulation

SLO-2 Microelectronics and Micro systems Significance of each technique Significance of MMC Challenges in packaging FEM analysis

S-2 SLO-1 Scaling laws in geometry Process Description of Photolithography Bulk MMC process – merits and demerits Different levels of Packaging

Design of a silicon die for a micro pressure sensor

SLO-2 Silicon as ideal material and as substrate Implementation of Photolithography Sequence of steps Die, device and system level Simulation in software

S-3 SLO-1 Si wafer production Process Description of CVD Significance of Isotropic etching

Differences in IC packaging technology And MEMS packaging

Application of MEMS in automotive industry

SLO-2 Cz process Implementation, merits and demerits of CVD

Anisotropic etching Airbag deployment

S-4 SLO-1

Sequential steps in wafer processing Process Description of PVD

Surface MMC process

Die Preparation Optical MEMS Application

SLO-2 Implementation, merits and demerits of PVD

Sequence of steps Plastic encapsulation and its significance Micro mirrors

S-5 SLO-1

Chemical and mechanical properties of Si and compounds

Process Description, implementation of Ion implantation

Challenges in surface MMC Types of wire bonding Thermo compression type

Micro fluidics Application

SLO-2 Chemical and mechanical properties of Polymers, Quartz and GaAs

Oxidation process Interfacial & Residual stresses Thermo sonic, Ultra sonic type Lab on chip module

S-6 SLO-1 Chemical, Biomedical type Micro sensors

Diffusion process LIGA process- description merits and demerits

Types of surface bonding – Adhesive IR and Gas sensing


SLO-2 Piezoelectric type of Micro sensors Wet etching methods Implementation soldering, SOI type of bonding Thermal sensors

S-7 SLO-1 Thermal, SMA, Piezoelectric actuators Properties of etchants

Process Design-block diagram and description

Anodic bonding and lift off process Micro power generation

SLO-2 Electro static type Micro Actuators Dry etching methods Electro-mechanical design, Thermo-electric design

Precautions to be taken Micro TEG

S-8 SLO-1

Micro devices- operation of Micro gears and micromotors

Production of plasma CAD- block diagram description and implementation

Types of sealing- Micro shells, Hermetic sealing

Chemical sensors

SLO-2 Micro devices –operation of Micro valves and pumps

Etch stop methods Micro ‘O’ rings,Reactive seal Micro humidity sensors

S-9 SLO-1

Case study Case study Case study Selection of packaging materials Micro pressure sensors

SLO-2 Material requirements Paper MEMS

Learning Resources

1. Tai-Ran Hsu, “MEMS and MICROSYSTEMS”, 22nd reprint edition, Wiley & sons, 2015 2. M. Madou, “Fundamentals of Micro fabrication”, Taylor and Francis group, 2002

3. VardhanGardener,”Micro sensors and smart devices”, John Wiley & Sons,2001 4. NPTEL link: https://nptel.ac.in/downloads/112108092/

Learning Assessment

Bloom’s

Level of Thinking



Level 1 Remember

30 % - 30 % - 30 % - 30 % - 30% - Understand

Level 2 Apply

40 % - 40 % - 40 % - 40 % - 40% - Analyze

Level 3 Evaluate

30 % - 30 % - 30 % - 30 % - 30% - Create

Total 100 % 100 % 100 % 100 % 100 %


Course Designers


1. D. Karthikeyan, Controlsoft Engineering India Pvt Ltd, [email protected] 1. Dr. J. Prakash, MIT, Chennai, [email protected] 1. Dr. A. Vimala Juliet, SRMIST

2. Mr. Hariharasudhan - Johnson Controls, Pune, [email protected] 2. Dr. D. Nedumaran, Madras University, [email protected] 2. R.Bakiyalakshmi,SRMIST



2018 Regulations

Project Work, Seminar, Internship in Industry / Higher Technical Institutions (P)




Course Code

18ECP109L / 18ECP110L

Course Name

PROJECT / SEMESTER INTERNSHIP Course

Category

P

Project Work, Seminar, Internship In Industry / Higher Technical Institutions (P)

L T P C

0 0 20 10


Nil Co-requisite

Courses Nil

Progressive Courses

Nil

Course Offering Department Electronics and Communication Engineering Data Book / Codes/Standards As required for the project work


CLR-1 : To prepare the student to gain major design and or research experience as applicable to the profession

CLR-2 : Apply knowledge and skills acquired through earlier course work in the chosen project

CLR-3 : Make conversant with the codes, standards , application software and equipment

CLR-4 : Carry out the projects within multiple design constraints

CLR-5 : Incorporate multidisciplinary components

CLR-6: Acquire the skills of comprehensive report writing


CLO-1 : Design a system / process or gain research insight into a defined problem as would be encountered in engineering practice taking into consideration its impact on global, economic, environmental and social context.

Learning Assessment

Continuous Learning Assessment

Assessment tool Review I Review II Review III Total

Weightage 5% 20% 25% 50%

Final Evaluation Assessment tool Project Report Viva Voce * Total

Weightage 20% 30% 50%

* Student has to be present for the viva voce for assessment. Otherwise it will be treated as non-appearance for the examination with final grade as ‘Ab’


Course Code

18ECP107L Course Name

MINOR PROJECT Course

Category

P


L T P C

0 0 6 3


Nil Co-requisite

Courses Nil

Progressive Courses

Nil

Course Offering Department Electronics and Communication Engineering Data Book / Codes/Standards As required for the project work


CLR-1 : Prepare the student to formulate an engineering problem within the domain of the courses undergone

CLR-2 : Seek solution to the problem by applying codes / standards/ software or carrying out experiments or through programming


CLO-1 : Identify a small part of major system or process, understand a problem associated with it and find solution or suggest a procedure leading to its solution.

Learning Assessment


Assessment tool Review I Review II Final Review * Total

Weightage 20% 30% 50% 100%

* Student has to be present for final review for assessment. Otherwise it will be treated as non-appearance for the examination with final grade as ‘Ab’


Course Code

18ECP101L / 18ECP104L

Course Name

MASSIVE OPEN ONLINE COURSE I / II Course

Category

P


L T P C

0 0 2 1


Nil Co-requisite

Courses Nil

Progressive Courses

Nil

Course Offering Department Electronics and Communication Engineering Data Book / Codes/Standards As exposed to during the duration of training


CLR-1 :


CLO-1 : Apply the concepts, theories, laws, technologies learnt herein to provide engineering solutions.

CLO-2 : Engage in independent and life-long learning

CLO-3 : Solve the real world problems individually and in collaboration

Learning Assessment

In-semester Assessment tool Quiz Assignment Non-proctored / Unsupervised Tests Proctored / Supervised Test Total

Weightage 25% 25% 10% 40% 100%

End semester examination Weightage : 0%


Course Code

18ECP102L / 18ECP105L

Course Name

INDUSTRIAL TRAINING I / II Course

Category

P


L T P C

0 0 2 1


Nil Co-requisite

Courses Nil

Progressive Courses

Nil

Course Offering Department Electronics and Communication Engineering Data Book / Codes/Standards As exposed to during the duration of training


CLR-1 : Provide an exposure to the students on the practical application of theoretical concepts in an industry or research institute


CLO-1 : Gain confidence to carry out supervisory, managerial, and design roles in an industrial context.

Learning Assessment


Assessment tool Final review

Weightage Training Report Presentation *

75% 25%

* Student has to be present for the presentation for assessment. Otherwise it will be treated as non-appearance for the examination with final grade as ‘Ab’


Course Code

18ECP108L Course Name

INTERNSHIP Course

Category P


L T P C

0 0 6 3


Nil Co-requisite

Courses Nil

Progressive Courses

Nil

Course Offering Department Electronics and Communication Engineering Data Book / Codes/Standards As exposed to during the duration of internship


CLR-1 : Provide an exposure to the students on the practical application of theoretical concepts in an industry or research institute and also to gain hands on experience in the context of design, production and maintenance


CLO-1 : Gain confidence to carry out supervisory, managerial, and design roles in an industrial context or research environment

Learning Assessment


Assessment tool Final review

Weightage Training Report Presentation*

75% 25%



Course Code

18ECP103L / 18ECP106L

Course Name

SEMINAR I / II Course

Category P


L T P C

0 0 2 1

Pre-requisite

Courses Nil


Nil Progressive

Courses Nil

Course Offering Department Electronics and Communication Engineering Data Book / Codes/Standards As applicable


CLR-1 : Identify an area of interest within the program or a related one (multidisciplinary), carry out a literature survey on it, gain understanding and present the same before an audience.


CLO-1 : Carry out a self-study of an area of interest and communicate the same to others with clarity.

Learning Assessment


Assessment tool Presentation

Weightage Presentation material

Presentation skills / ability to answer questions / understanding of the topic*

60% 40%


Documents

B. Tech in lectronics and Communication Engineering E ......B.Tech (ECE-CPS) SRM Institute of Science & Technology – Academic Curricula (2018 Regulations) 2 (e) Program Structure