B S Brick Specials

8/13/2019 B S Brick Specials

1/32

Hanson Building Products brick specialsUniclassL3211

CI/SfBFg2August 2009

British Standard brick specials


2/32

Abbey red multi Abbey red multi

Specials checklist

DurabilityWhen ordering, please check that the durability rating

of the brick is suitable for its intended application.

ScheduleIt is important to provide a schedule with yourrequirements. Please check lead times to allow us towork within your building programme.

Design advicePlease seek further design advice from our specialsdepartment Tel 08705 258258 when using copings,cappings and cills in exposed locations or if you requirebespoke specials for specific applications.

Manufacturing typeWhen ordering please state clearly if the format of thespecial is critical i.e. frogged, solid or perforated.

Brick face requirementsIf a finished face other than those illustrated is required

please indicate on your order, as specific requirements canusually be accommodated and priced accordingly.

Left or right handed bricksCertain specials may require to be left or right handed andthis should be stated on your order.

Brick variationsTextural and colour variations may occur with certain specialsas they may be manufactured by a different process to thestandard product.

Installation regulationsSpecial shapes should be used in accordance with therecommendations contained within BS 5628 Part 3Code of Practice for use of masonry.

2

Quality and the environmentAll Hanson special shaped brick products are

manufactured to a quality assurance system whichconforms to BS EN I SO 9001:2000. The company has anenvironmental and sustainability policy and operates anEnvironmental Management System which fully complieswith the requirements of BS EN ISO 14001:1996.

Cradley - a wealth of experienceHanson Cradley specialises in the manufacture of handmade British Standard brick specials to BS 4729:2005.We also offer a vast range of imperial and architecturalnon-standard special shaped bricks and canmanufacture to your own design. We have a wealth ofexperience which we employ to faithfully reproducepatterned and shaped specials using time honouredproduction techniques.

Since its inception in 1995, Hanson Cradley hasamassed a catalogue of over 6,000 unique and individualpatterns to complement our range of 261 BritishStandard specials.


3/32

Sales service and support08705 258258 is the only number you need to reach a

comprehensive sales and support service. This number putsyou in touch with our specials co-ordinators, who willrespond directly to your enquiry, providing prices, orderprocessing and delivery commitments. Through theco-ordinators you can also arrange for an account managerto discuss any specific projects, provide samples and givegeneral advice on any of Hansons product range.

Technical advisory serviceFully committed to promoting good practice in the designand use of brickwork, Hanson offers an unrivalled technicalsupport service to all users of its products, working inpartnership with its customers to reach the ideal buildingsolution, from beginning to end.

From conception to completion, Hansons technical advisoryservice department offers advice, technical support andon-site involvement throughout the projects development.

WebsiteVisit the Hanson website at www.hanson.com/uk to viewcomprehensive information on all of our products andservices. Product literature for the entire Hanson range isavailable to download from our online literature library.

3

Please be aware that brick specials are manufactured aseither solid, perforated or frogged, depending on locationof manufacture and type of clay used.

The product illustrations shown within this guiderepresent the specials as solid construction, in order toprovide a visual consistency.

The darker shading shown on the illustrations representthe face of the brick.

If you have a specific enquiry where the type ofmanufacture may be important, please contact our brick specials department on 08705 258258 to discussyour requirement.

Using your guide to brick specials

Perforated Solid

Frogged

ContentsQuality and the environment 2Order checklist 2Using your guide to brick specials 3Sales service and support 3Cut and bond bricks 4Gable end bricks 4Prefabricated arches 4Bespoke specials 5Restoration and renovation bricks 5Pavers 6Slips & spacing bricks 6Glazed bricks 6Cills & scrolls 6

Air bricks and ducts 6Brick specials colour range 7

PS/SD - Pistol and soldier bricks 20-21

PL - Plinth bricks 22-25

RD - Radial bricks 26-27

AR - Arch bricks and arch systems 28-31

AN - Angle and cant bricks 8-12

BD - Bonding bricks 13CP - Copings and cappings 14

BN - Bullnose bricks 15-19

British Standard brick specials

tel: 08705 258258 email: [email protected] web: www.hanson.com/uk/brickspecials


4/32

Cut brick Cut and bond brick

Cut and bond bricks

Gable end bricksHanson offers a cutting service for gable end bricks,removing the need for bricks to be cut on-site andensuring product quality and accurate colour matching.

When placing your order simply supply us with thepitch angle and quantity required and we will deliveryour specials with your facing brick order within anagreed timeframe.

For further information on our cut and bond service,contact us on: 08705 258258.

Prefabricated arches

Hanson manufactures a range of prefabricated arches, theseare a fast and simple method of constructing arches thatalso reduce onsite wastage and make it easier to addattractive detailing to a development.

Our prefabricated arches can be manufactured using ourown arch bricks, which we manufacture in a variety of stylesand colours, or we can incorporate bricks of a specificdesign and specification. These are then placed into mouldsand cast in concrete, rendering the arch a solid structurewhich we deliver intact, ready to be lifted into place on site.

To find out more about how you can save time and moneyonsite using prefabricated arches please contact ourbrick specials team on 08705 258258.

4

A

0

B

A1

When construction deadlines are tight or for when somethingother than standard specials are required, Hanson can provide acut and bond service, under the strict control of our qualityassurance system. Cut and bond specials provide an economicalalternative to many standard specials with the added bonus ofgreatly reduced lead times.

Cut and bond specials are epoxy bonded which makes themsuitable for both internal and external applications whereangled special shaped bricks would normally be employed.


5/32

Bespoke specials

Restoration and renovation bricks

Although Hanson offers the widest range of brick specialsavailable in the UK, there are times where bespoke bricksare required. Our dedicated brick specials department candesign and manufacture brick specials according to yourspecific requirements, from large format pier caps and namebricks through to specially designed decorative bricks - wecan provide a cost effective and quick service.

5

Hanson Cradleys expertise and experience inmanufacturing brick specials for restoration and renovationpurposes has led us to be involved in some of the largestrestoration and renovation projects in the country, wheregreat care has been taken to restore historic buildings totheir former glory.

As well as our extensive range of specials to matchbrickwork of a specific era, the craftsmen in our specialsdepartment can faithfully reproduce brick specials usingthe original products, drawings or photographs.

For more information on our more specialist products pleasecontact our brick specials team on Tel: 08705 258258 /

Email: [email protected] or visit our websitewww.hanson.com/uk/brickspecials



6/32

6

Pavers

Cills and scrollsA range of cills and returns have been designed toprovide the correct overhang and drip detail to ensuredurability of brickwork.

Our scroll bricks can be used as a decorative surround

for openings or as a design feature within a standardbrick wall.

Air bricks & ductsHanson air bricks are produced in three standardsmoothfaced colours (red terracotta, buff fireclay andblue-black), with a choice of three styles (louvre, squareand rectangular) and three sizes. Sandfaced and texturedfinishes are made to order in a variety of colours.

Cavity wall bridging ducts are available in a variety oflengths to suit different wall thicknesses. For furtherinformation on our range of air bricks and cavity wallbridging ducts and for technical support pleasecontact us on: 01530 270333.

The quality and aesthetic appeal of clay pavers is of realimportance to the success of any hard landscaping.With years of experience in the manufacture of clay pavers,

Hanson has the knowledge required to produce the rightproduct to the highest standards. With a range of coloursavailable there is a product to complement and blend withany landscape paving scheme.

We can offer glazed bricks in a range of vibrant colours toadd unique and interesting details and features to anybuilding design. A full range of glazed special shapes isalso available to complement the glazed facing brick range.

Glazed bricks

Slips & spacing bricksHanson offers a range of brick slips that are used to createthe appearance of solid brickwork utilising thin slips as a

cladding or covering to various types of structure. We alsomanufacture spacing bricks of engineering quality which arethe ideal solution for manhole covers where there is adiscrepancy between the level of the road and the level ofthe manhole cover.

Typical air brick and cavity wallduct installation

SP.1SP.2

SP.3


7/32

7

Red Smooth Clumber Red Mixture Clumber Buff

Abbey Red Multi Rochester Blend Chatsworth Grey Rustic

Dark Multi Smooth Carnforth Smooth Cream Village Golden Thatch

Atherstone Red Atherstone Buff Ashwell Yellow Multi

Atherstone Red Multi Atherstone Buff Multi Blue Smooth

Our range of brick specials can be manufactured to match anybrick from our core facing brick range.

The breadth of colour, shade, tone and variation included in ourbrick range offers the full spectrum of design solutions - fromcolour matching to legacy housing stock, to bold colourcombinations employed in striking contemporary designs.

Reds - from full-blooded reds, to faded rose or orange and allpoints in between.

Buffs and yellows - from richly flecked and variegated buffs, tobuttery yellows and iridescent yellow/purple blends.Browns, blues, greys and blacks - from the palest taupes andgreys, through to inky blue or midnight black.

Brick specials colour range

These brick samples represent a small selection of our core brick range, for our fullrange please refer to our facing brick brochure or visit www.hanson.com/uk.



8/32

AN - Angle and cant bricks

British Standard brick specialsThis group is made up of special brickswith two separate functions.

The angle bricks allow brickwork to turnthrough 30, 45, and 60 degree angles inplan with various bonding patterns.

The cant range allows splay detailingto be achieved within brickwork towindow surrounds, corner details andother locations.

A

90

E

D

B

C

8

AN.1 Squint(left or right hand - if surface has textured finish)

Left hand shown

Type A B C D EAN.1.1 164 102 65 51 89 30

AN.1.2 164 102 65 51 94 45

AN.1.3 164 102 65 51 117 60

B

C

A

D

8

Type A B C D

AN.2.1 1591 102 65 102 30

AN.2.2 1591 102 65 102 45

AN.2.3 1591 102 65 102 60

AN.2.4 2152 102 65 102 30

AN.2.5 2152 102 65 102 45

AN.2.6 2152 102 65 102 60

Left hand shown

1 Suitable for quarter bond without cutting2 Suitable for half bond without cuttingNote: Some types of bricks may not be available with A = 215mm

AN.3 Internal angle (dog leg)(left or right hand - if surface has textured finish)

Type A B C D

AN.3.1 1642 102 65 51 30AN.3.2 1642 102 65 51 45AN.3.3 1642 102 65 51 60AN.3.4 1591 102 65 102 30AN.3.5 1591 102 65 102 45AN.3.6 1591 102 65 102 60AN.3.7 2152 102 65 102 30AN.3.8 2152 102 65 102 45AN.3.9 2152 102 65 102 60

1 Suitable for quarter bond without cutting2 Suitable for half bond without cuttingNote: Some types of bricks may not be available with A = 215mm

Note: Suitable for half bond without cutting

AN.2 External angle(left or right hand - if surface has textured finish)

B

C

D

A 8

A

C

B

8

AN.4 Birdsmouth

Type A B CAN.4.1 215 102 65 120

AN.4.2 215 102 65 135

AN.4.3 215 102 65 150

8

Left hand shown


9/32

9

A

D

EE

C

B

AN.7 Single cant external return

Mirror

Type A B C D E

AN.7.1 215 215 102 46 159

AN.7.2 215 215 102 60 173

AD

C

B

E

E E

AN.8 Single cant internal returnwith internal mitre (square external corner on bed)

Mirror

Type A B C D E

AN.8.1 215 215 102 46 159

AN.8.2 215 215 102 60 173

Note: Faced on two full stretchers.

AD

C

B

45 o 45 o

E E

AN.9 Single cant internal returnwith internal slope (square external corner on bed)

Mirror

Type A B C D E

AN.9.1 215 215 102 46 159

AN.9.2 215 215 102 60 173

Note: Faced on two full stretchers.

A

B

F F

AN.10 Single cant external angle

Mirror

Type A B C D E F

AN.10.1 215 102 159 46 159 101 30AN.10.2 215 102 159 60 173 101 30

AN.10.3 215 102 159 46 159 70 45AN.10.4 215 102 159 60 173 70 45AN.10.5 215 102 159 46 159 35 60AN.10.6 215 102 159 60 173 35 60

A

E

C

B

D

AN.6 Double cant

Type A B C D E

AN.6.1 215 102 65 46 103

AN.6.2 215 102 65 60 131

Note: When these cappings are required at stop-endlocations, specially faced units can be provided.

E

D

C C

8

B

D

A

E

C

AN.5 Single cant(left or right hand - if surface has textured finish)

Left hand shown

Type A B C D E

AN.5.1 215 102 65 46 159

AN.5.2 215 102 65 60 173

Note: All faced on header bricks shown on bed as used in atypical brickwork application.May also be used on end or on edge for paving applications.

AN



10/32

10

B

CC

E

8

AN.11 Single cant internal angle

A

B

F F

Mirror

Type A B C D E FAN.11.1 215 102 159 46 159 101 30

AN.11.2 215 102 159 60 173 101 30

AN.11.3 215 102 159 46 159 70 45

AN.11.4 215 102 159 60 173 70 45

AN.11 .5 215 102 159 46 159 35 60

AN.11 .6 215 10 2 159 60 173 35 60

C

B A

EF

D

AN.12 Double cant stop end(square corners on bed)

Mirror

Type A B C D E F

AN.12.1 215 215 102 46 103 159

AN.12.2 215 215 102 60 131 173

AN.13 Double cant stop end(canted corners on bed)

Type A B C D E FAN.13.1 215 215 102 46 103 159

AN.13.2 215 215 102 60 131 173

E

AB

D

C

F

Mirror

A

D

EE

C

B

45 o45 o

AN.14 Double cant external returnwith internal mitre (square corners on bed)

Type A B C D E

AN.14.1 215 215 102 46 103

AN.14.2 215 215 102 60 131

Mirror

A

FF

D

EE

C

B

45 o

45o

AN.15 Double cant external returnwith internal mitre (canted corner on bed)

Type A B C D E F

AN.15.1 215 215 102 46 103 159

AN.15.2 215 215 102 60 131 173

Mirror

A

D

EE

C

B

45 o45 o

AN.16 Double cant external returnwith internal slope (square corner on bed)

Type A B C D EAN.16.1 215 215 102 46 103

AN.16.2 215 215 102 60 131

Mirror



11/32

11

AN.19 Double cant T junction

AN.3.2.11 Female universal joint

AN.2.2.11 Male universal joint

AN.18 Double cant angle

AN.17 Double cant external returnwith internal slope (canted corner on bed)

A

FF

D

EE

C

B

45 o45 o

Type A B C D E F

AN.17.1 215 215 102 46 103 159

AN.17.2 215 215 102 60 131 173

Mirror

B

CC

D

E

8

A

F F

Mirror

Type A B C D E FAN.18.1 215 102 159 46 103 101 30AN.18.2 215 102 159 60 131 101 30AN.18.3 215 102 159 46 103 70 45AN.18.4 215 102 159 60 131 70 45AN.18.5 215 102 159 46 103 35 60AN.18.6 215 102 159 60 131 35 60

Note: May be supplied in sections.

A

F

EF

C

B

D 45 o45 o

Type A B C D E F

AN.19.1 215 215 102 46 103 56

AN.19.2 215 215 102 60 131 42

R

A

B

C

D

E

Type A B C D E

AN.3.2.11 230 102 65 218 12

Type A B C D E

AN.2.2.11 215 102 65 106 26

A

E

D

R

B

C

AN



12/32

12

PC.1 Canted pier cap(also see coping and capping brick specials)

MAN.1 Double cant stop end

MAN.2 Single cantfaced on side (left or right hand)

MSD.4 External soldier returnto single cant on end (also see soldier brick specials)

MSD.5 External angle soldier returnto single cant on end (also see soldier brick specials)

MSD.6 Internal angle soldier returnto single cant on end (also see soldier brick specials)

Type A B C D E

PC.1.1 215 215 102 46 103

PC.1.2 215 215 102 60 131

PC.1.3 215 215 65 9 103

PC.1.4 215 215 65 22 131

AB

C

E

D

C

BA

E

D

F

45

Type A B C D E F

MAN.1.1 215 102 65 9 103 46

MAN.1.2 215 102 65 23 131 60

Type A B C D E

MAN.2.1 215 102 65 46 159

MAN.2.2 215 102 65 60 173

E

D

A

B

C

Left hand shown

BF

A

EG

D

C

Type A B C D E F G

MSD.4.1 215 177 159 46 65 102 10

MSD.4.2 215 177 173 60 65 102 10

B

DE

C

F

A

8

DC

A

B

E

F

8

Type A B C D E F

MSD.6.1 215 107 102 65 46 159 45

MSD.6.2 215 107 102 65 60 173 45

Note: Other angles also available.

Type A B C D E F

MSD.5.1 215 159 102 102 46 60 45

MSD.5.2 215 173 102 102 60 60 45

Note: Other angles also available.



13/32

BD - bonding bricks

British Standard brick specialsThe BD range covers special shapedbricks used to create brick bondingin solid walls without the need for

cutting bricks on site.English, English Garden Wall andFlemish bonds can also be constructedusing these specials.

BD.1.1 Half bat (snap header)

13

AB

C

Type A B C

BD.1.1 102 102 65

Note: Can be supplied face on bed

AB

C

Type A B C

BD.1.2 159 102 65

Left hand shown

C

A

B

Type A B C

BD.1.3 215 102 65

Note: Faced on two headers, one stretcher and one bed.

Reverse

BD.1.3 Standard brick(faced on bed surface)

A

D

B

E

C

*

Type A B C D E

BD.2 215 102 65 102 46

Note: BD.2 can be supplied with an additional face

(*) and can therefore be used as a cill brick.

Left hand shown

Reverse

A

B

C

Type A B C

BD.3 215 46 65

A

C

B

Type A B C

BD.4.1 215 159 102BD.4.2 215 159 65

BD.4.3 215 215 102

BD.4.4 215 215 65

Mirror

BD.1.2 Three quarter bat(left or right hand - if surface has textured finish)

BD.3 Queen closer

BD.4 215mm stop end

BD.2 King closer

(left or right hand - if surface has textured finish)



14/32


15/32


16/32

BN.10 Bullnose external return on edge

AB

CR

BA

C

Mirror

Type A B C R

BN.10.3 215 215 102 25

BN.10.4 215 215 102 51

16

BN.8 Single bullnose internal returnheader faced

BN.9 Bullnose internal returnflat faced (left or right hand)

BN.10 Bullnose external return on edge(left or right hand)

BN.7 Single bullnose internal mitre

A

C

B

R

R

A C

B

R R

Type A B C R

BN.7.1 215 102 65 25

BN.7.2 215 102 65 51

Type A B C R

BN.7.3 215 102 215 25

BN.7.4 215 102 215 51

Left hand shown

BN.7 Single bullnose internal return(left or right hand)

A

R

R

C

B

Type A B C R

BN.8.1 215 102 65 25

BN.8.2 215 102 65 51

Right hand shown

BN.8 Single bullnose internal returnheader faced (left or right hand)

B

A

C

RR

Type A B C R

BN.8.3 215 102 102 25

BN.8.4 215 102 102 51

A

C

B

R R

Type A B C R

BN.9.1 215 102 65 25

BN.9.2 215 102 65 51

Left hand shown

C

B

A

R

R

Mirror

Type A B C R

BN.10.1 215 65 102 25

BN.10.2 215 65 102 51

Left hand shown

BN - bullnose bricks


17/32

17

BN.11 Bullnose external return on flat(left or right hand)

BN.11 Bullnose external returnflat faced

BN.13 Bullnose double header on flat

BN.14 Bullnose double stretcher on flat

BN.15 Stop end to double bullnose on edgeand to bullnose double header on flat (square corners on bed)

A

C

B

AB

C R

C

AB

Mirror

Type A B C R

BN.11.1 215 102 65 25

BN.11.2 215 102 65 51

Type A B C R

BN.11.3 215 215 65 25

BN.11.4 215 215 65 51

BN.12 Bullnose mitre(left or right handed)

R

Mirror

Left hand shown

A

C

B

R

Type A B C RBN.15.1 215 159 102 25BN.15.2 215 159 102 51BN.15.3 215 215 102 25BN.15.4 215 215 102 51

BN.15.5 215 159 65 25BN.15.6 215 159 65 51BN.15.7 215 215 65 25BN.15.8 215 215 65 51

AB

CR

R

A

C

B

RR

A

C

B

R

Type A B C R

BN.13.1 215 102 65 25

BN.13.2 215 102 65 51

Type A B C R

BN.14.1 215 102 65 25

BN.14.2 215 102 65 51

Mirror

BN

A

C

B

R

RR

Type A B C R

BN.12.1 215 102 65 25

BN.12.2 215 102 65 51

Left hand shown



18/32

18

BN.17 Cownose stop

BN.16 Cownose

A

C

B

R

A

C

D

B

R

A

D

C

B

R

A

C

B

R R

R

Mirror

MirrorMirror

Mirror

Type A B C R

BN.18.1 215 159 102 25

BN.18.2 215 159 102 51

BN.18.3 215 215 102 25

BN.18.4 215 215 102 51

BN.18.5 215 159 65 25BN.18.6 215 159 65 51

BN.18.7 215 215 65 25

BN.18.8 215 215 65 51

BN.19 External return todouble bullnose on edgeand to bullnose double header on flat (square corners on bed)

Type A B C R

BN.16.1 215 102 65 25

BN.16.2 215 102 65 51

Type A B C D R

BN.17.1 215 102 65 25 25

BN.17.2 215 102 65 25 51

A

C

B

RR

Type A B C R

BN.19.1 215 215 102 25

BN.19.2 215 215 102 51

BN.19.3 215 215 65 25

BN.19.4 215 215 65 51

C

D D

C

B

8

R

A

Mirror

Type A B C D RBN.21.1 215 102 159 101 25 30BN.21.2 215 102 159 101 51 30BN.21.3 215 65 159 101 25 30BN.21.4 215 65 159 101 51 30BN.21.5 215 102 159 70 25 45BN.21.6 215 102 159 70 51 45BN.21.7 215 65 159 70 25 45BN.21.8 215 65 159 70 51 45BN.21.9 215 102 159 35 25 60BN.21.10 215 102 159 35 51 60BN.21.11 215 65 159 35 25 60BN.21.12 215 65 159 35 51 60

BN.18 Stop end to doublebullnose on edgeand to bullnose double header on flat (rounded corners on bed)

Mirror

BN.20 External return to doublebullnose on edgeand to bullnose double header on flat (rounded corners on bed)

BN.21 Double bullnose external angleto double bullnose on edgeand to bullnose double header on flat

A

C

B

R

R R

Mirror

Type A B C RBN.20.1 215 215 102 25BN.20.2 215 215 102 51BN.20.3 215 215 65 25BN.20.4 215 215 65 51

BN - bullnose bricks


19/32


20/32

PS/SD - pistol and soldier bricks

British Standard brick specialsThe use of soldier courses givesopportunities to break up mass and addinterest to large areas of brickwork, in

complementary or contrasting coloursand textures. This group allows the neatand effective detailing of soldiercourses around internal and external 90degree returns.

PS.1 Pistol soldier SD.2 Internal soldier returnto single cant on end

PS.2 Pistol stretcher(left or right hand - if surface has textured finish)

SD.3 External soldier returnto single cant on end

20

A

B

CD

E

Type A B C D E

PS.1.1 215 102 65 140 25

PS.1.2 215 102 65 65 25

PS.1.3 215 102 65 185 25

Type A B C D EPS.2.1 215 102 65 35 20

D

A

C

B

E

SD.1 Soldier return

CB

A

Type A B C

SD.1.1 215 65 65

SD.1.2 215 102 102

D D

A

CB

E4545

Type A B C D E

SD.2.1 215 102 102 46 159

SD.2.2 215 102 102 60 173

D D

A

BC

E

B

A

C

D

E

Type A B C D E

SD.3.1 215 102 102 46 159

SD.3.2 215 102 102 60 173

MSD.1 External soldier return on end

Type A B C D E

MSD.1.1 215 215 102 65 10

MSD.1.2 215 326 102 102 10


21/32

21

MSD.2 External angle soldier on end

MSD.3 Internal angle soldier on end

MSD.4 External soldier returnto single cant on end (also see angles and cant brick specials)

MSD.5 External angle soldier returnto single cant on end (also see angles and cant brick specials)

MSD.6 Internal angle soldier returnto single cant on end (also see angles and cant brick specials)

C

A

B

D

B

A

D

C

Type A B C D

MSD.2.1 215 65 102 23 45

MSD.2.2 215 102 102 60 45

Note: Other angles are also available.

Type A B C D

MSD.3.1 215 65 102 107 45

MSD.3.2 215 102 102 144 45


Type A B C D E F

MSD.5.1 215 159 102 102 46 60 45

MSD.5.2 215 173 102 102 60 60 45

B

DE

C

F

A

8


DC

A

B

E

F

8

Type A B C D E F

MSD.6.1 215 107 102 65 46 159 45

MSD.6.2 215 107 102 65 60 173 45


BF

A

EG

D

C

Type A B C D E F G

MSD.4.1 215 177 159 46 65 102 10

MSD.4.2 215 177 173 60 65 102 10

PS/SD



22/32

PL - plinth bricks

British Standard brick specialsPlinth specials are often used to createa splay detail at the base of a building.They are also increasingly being used

for corbel detailing and windowsurround details in association withangle and cant specials.

PL.1 Plinth stop or cant stop(left or right hand)

PL.2 Plinth header

PL.3.1.1 Oversize plinth stretcher

22

EF

AB

C

D 8

Type A B C D E F

PL.1.1 215 102 65 9 159 46 45

PL.1.2 215 102 65 23 173 60 45

A

D

E

B

C 8

Left hand shown

C

D

E

AB

8

Type A B C D E

PL.3.1 215 102 65 9 46 45

PL.3.2 215 102 65 23 60 45

Type A B C D E

PL.2.1 215 102 65 9 159 45

PL.2.2 215 102 65 23 173 45

PL.3 Plinth stretcher

Type A B C D E

PL.3 .1.1 215 158 65 9 10 2 45

B

C

A

E

D 8

PL.3.2.1 Oversize plinth stretcher

B

C

A

E

D 8

A

F

B

C

D

E

8

Type A B C D E F

PL.4.1 215 102 65 9 46 169 45

PL.4.2 215 102 65 23 60 155 45

Type A B C D E

PL.3.2.1 215 144 65 22 102 45

Left hand shown

PL.4 Plinth internal return - long(left or right hand)


23/32

23

PL.5 Plinth internal return - short(left or right hand)

PL.6 Plinth internal angle(left or right hand)

A

E

B

C

D

F 8

Type A B C D E F

PL.5.1 215 102 65 9 159 46 45

PL.5.2 215 102 65 23 173 60 45

Left hand shown

45

C

B

F

D

A

E 8

Type A B C D E F

PL.6.1 1641 102 65 9 51 46 30

PL.6.2 1641 102 65 23 51 60 30

PL.6.3 1641 102 65 9 51 46 45

PL.6.4 1641 102 65 23 51 60 45

PL.6.5 1641 102 65 9 51 46 60

PL.6.6 1641 102 65 23 51 60 60

PL.6.7 1592 102 65 9 102 46 30PL.6.8 1592 102 65 23 102 60 30

PL.6.9 1592 102 65 9 102 46 45

PL.6.10 1592 102 65 23 102 60 45

PL.6.11 1592 102 65 9 102 46 60

PL.6.12 1592 102 65 23 102 60 60

PL.6.13 2151 102 65 9 102 46 30

PL.6.14 2151 102 65 23 102 60 30

PL.6.15 2151 102 65 9 102 46 45

PL.6.16 2151 102 65 23 102 60 45

PL.6.17 2151 102 65 9 102 46 60

PL.6.18 2151 102 65 23 102 60 60

Left hand shown

1

Suitable for half bond without cutting2 Suitable for quarter bond without cutting

A

E

CD

B

F

45

8

Type A B C D E F

PL.8.1 1592 102 65 9 102 46 30PL.8.2 1592 102 65 23 102 60 30PL.8.3 1592 102 65 9 102 46 45PL.8.4 1592 102 65 23 102 60 45

PL.8.5 1592 102 65 9 102 46 60PL.8.6 1592 102 65 23 102 60 60PL.8.7 2151 102 65 9 102 46 30PL.8.8 2151 102 65 23 102 60 30PL.8.9 2151 102 65 9 102 46 45PL.8.10 215 1 102 65 23 102 60 45PL.8.11 215 1 102 65 9 102 46 60PL.8.12 215 1 102 65 23 102 60 60

Left hand shown

1 Suitable for half bond without cutting2 Suitable for quarter bond without cutting

A

E

C

D

F

B

8

Type A B C D E F

PL.7.1 215 102 65 9 159 46 45

PL.7.2 215 102 65 23 173 60 45

Left hand shown

A

E

C

D

B

F

45

8

Type A B C D E FPL.9.1 164 102 65 9 51 46 30PL.9.2 164 102 65 23 51 60 30

PL.9.3 164 102 65 9 51 46 45PL.9.4 164 102 65 23 51 60 45PL.9.5 164 102 65 9 51 46 60PL.9.6 164 102 65 23 51 60 60

Left hand shown

PL.8 Plinth external return(left or right hand)

PL.7 Plinth external return(left or right hand)

PL.9 Plinth squint(left or right hand)

PL



24/32

MRD.2 Radial plinth header(also see radial brick specials)

MPL.3 Wide bed plinth stretcher

MPL.5 Wide bed plinth internal return

24

MPL.4 Wide bed plinth external return(left or right hand)

D

B

C

AF

E

Type A B C D E F 1 2

MRD.2.1 215 108 65 85 159 9 1125 15

MRD.2.2 215 108 65 85 173 23 1125 15

MRD.2.3 215 108 65 92 159 9 1575 21

MRD.2.4 215 108 65 92 173 23 1575 21

MRD.2.5 215 108 65 94 159 9 1800 24

MRD.2.6 215 108 65 94 173 23 1800 241 Ideal outer radius (mm)2 No. per quadrantNote: Other angles also available.

MPL.1 Plinth header faced on end(left or right hand)

MPL.2 Plinth stretcher faced on end(left or right hand)

B

C

A

D

E

45

Type A B C D E

MPL.3.1 215 158 65 9 102

MPL.3.2 215 144 65 23 102

A

C

B

D

E

F

45

Type A B C D E F

MPL.4.1 271 158 65 9 215 102

MPL.4.1 257 144 65 23 215 102

Left hand shown

G

E

C

DF

A B

Type A B C D E F G

M PL.5.1 215 215 158 57 102 9 65

M PL.5.2 215 215 144 71 102 23 65

PL - plinth bricks

A

C

B

D

E

45

Type A B C D E

MPL.1.1 215 102 65 9 159

MPL.1.2 215 102 65 23 173

Right hand shown

B

C

A

D

E

45

Type A B C D E

MPL.2.1 215 102 65 9 46

MPL.2.2 215 102 65 23 60

Right hand shown


25/32

25

MPL.8 Wide bed stretcher

MPL.9 Wide bed external angle(left or right hand)

MPL.10 Wide bed internal angledog leg (left or right hand)

B

D

A

C

8

Type A B C D

MPL.9.1 215 158 65 102 45

MPL.9.1 215 144 65 102 45


Left hand shown

AB

C

Type A B C

MPL.8.1 215 158 65

MPL.8.2 215 144 65

B A

D

C

8

D

B

C

E

A

45

Type A B C D E

MPL.11.1 215 158 65 9 102

MPL.11.2 215 144 65 23 102

Type A B C D

MPL.10.1 215 158 65 102 45

MPL.10.1 215 144 65 102 45


Left hand shown

Left hand shown

MPL.11 Wide bed plinth stretcher

faced on side (left or right hand)

MPL.6 Wide bed plinth external angle(left or right hand)

MPL.7 Wide bed plinth internal angle(left or right hand)

C

B

E

A

D

F

8

45

Type A B C D E F

MPL.6.1 215 158 65 9 102 102 45

MPL.6.1 215 144 65 23 102 102 45


Left hand shown

AE

B

C

F

D45

8

Type A B C D E F

MPL.7.1 215 158 65 9 102 102 45

MPL.7.1 215 144 65 23 102 102 45


Left hand shown

PL



26/32

RD - radial bricks

British Standard brick specialsRadial specials are primarily used toform circular detail brickwork in plan,without having tapered joints. They also

give a true, concise curve to brickwork without the unattractive stepping thatwould otherwise be seen if standardfacing bricks were used.

RD.3 Radial stretcher


26

Type A B C D 1 2

RD.1.1 215 108 65 52 450 6RD.1.2 215 108 65 70 675 9RD.1.3 215 108 65 80 900 12RD.1.4 215 108 65 89 1350 18

RD.1.5 215 108 65 97 2250 30RD.1.6 215 108 65 103 5400 72

Mirror

1 Ideal outer radius (mm)2 No. per quadrant

Note: Dimensions B and D in types RD.1 are segmentedlengths, measured from corner to corner, not along curve.

AB

D

C


A

D

B

C

R1

R1

A

C

B

Type A B C D 1 2

RD.2.1 226 102 65 172 450 3

RD.2.2 226 102 65 190 675 4.5

RD.2.3 226 102 65 199 900 6

RD.2.4 226 102 65 208 1350 9

RD.2.5 226 102 65 215 2250 15

RD.2.6 226 102 65 221 5400 36


Note: Dimensions A and D in types RD.2 are segmented lengths,measured from corner to corner, not along curve.

*Denotes chord length

Type A* B C R1

RD.3.1 215 102 65 250

RD.3.2 215 102 65 500RD.3.3 215 102 65 750

RD.3.4 215 102 65 1000

RD.3.5 215 102 65 1250

Mirror

R1

R1

A

B

C

*Denotes chord length

Type A* B C R1

RD.4.1 215 102 65 250

RD.4.2 215 102 65 500

RD.4.3 215 102 65 750

RD.4.4 215 102 65 1000

RD.1 Radial header


27/32

27

MRD.1 Radial header

MRD.3 Radial bullnose header(also see bullnose brick specials)

MRD.4 Radial stretcher

D

B

C

A

Type A B C D 1 2

MRD.1.1 215 108 65 85 1125 15

MRD.1.2 215 108 65 92 1575 21

MRD.1.3 215 108 65 94 1800 241 Ideal outer radius (mm)2 No. per quadrant

D

B

C

AF

E

Type A B C D E F 1 2

MRD.2.1 215 108 65 85 159 9 1125 15

MRD.2.2 215 108 65 85 173 23 1125 15

MRD.2.3 215 108 65 92 159 9 1575 21

MRD.2.4 215 108 65 92 173 23 1575 21MRD.2.5 215 108 65 94 159 9 1800 24

MRD.2.6 215 108 65 94 173 23 1800 24


Note: Other sizes are also available.

R

D

B

C

A

Type A B C D R 1 2

MRD.3.1 215 108 65 85 25 1125 15

MRD.3.2 215 108 65 85 51 1125 15

MRD.3.3 215 108 65 92 25 1575 21

MRD.3.4 215 108 65 92 51 1575 21

MRD.3.5 215 108 65 94 25 1800 24

MRD.3.6 215 108 65 94 51 1800 241 Ideal outer radius (mm)2 No. per quadrant

Note: Other sizes are also available.

MRD.2 Radial plinth header(also see plinth brick specials)

D

BA

C


Type A B C D 1 2

MRD.4.1 226 102 65 204 1125 7.5

MRD.4.2 226 102 65 210 1575 10.5

MRD.4.3 226 102 65 212 1800 12

RD



28/32

AR - arch bricks and arch systems

British Standard brick specialsArch or tapered bricks are used to form semi-circular, bulls eye, segmental or other formsof decorative arch units to several different

radii specified in the standard.Our pre-packaged arch sets make theconstruction of traditional voussoir-stylewindow and door arches simple and accurate.

Although purpose made specials have alwaysbeen available, they have, in the past, onlybeen produced to order. This is especiallytrue of arches.

We have now enhanced this facility bymanufacturing a wide choice of classic archsets that can usually be delivered direct to sitewithin three weeks from acceptance of order.

AR.1 Tapered header

AR.2 Tapered stretcher

28

BA

D

C

Type A B C D 1 2 3

AR.1.1 215 102 75 59 910 4 20/21AR.1.2 215 102 75 64 1360 6 28/29AR.1.3 215 102 75 66 1810 8 36/37AR.1.4 215 102 75 69 2710 12 53/54

Type A B C D 1 2 3

AR.2.1 215 102 75 48 910 4 25AR.2.2 215 102 75 55 1360 6 33AR.2.3 215 102 75 58 1810 8 41AR.2.4 215 102 75 63 2710 12 58

Mirror

Mirror

1 Ideal span (mm) 2 No. of whole bricks 3 Bricks in semi-circle

1 Ideal span (mm) 2 No. of whole bricks 3 Bricks in semi-circle

Note: This format is not as versatile in applications as AR.1series because the longer voussoir joint accentuates splays.Tolerance allowances limit versatility further.

C

A

D

B

Arch Type 1

0

BA

A

Dim 0 Dim B A 1

488 18 215 6

630 10 215 8

915 145 215 10

1200 130 215 14

1500 130 215 18

1750 80 215 22

1800 130 215 22

2250 130 215 28

2350 80 215 30

2400 130 215 30

Dim 0 - window opening

Dim B - keystone1 No. of standard units

Note: All arches are available as individualbricks or pre-cast units.


29/32

29

KS. Keystones - to suit any size span

0

B

A

A1

Dim 0 Dim B A A1 1

488 18 215 290 6

630 10 215 290 8915 145 215 290 10

1200 130 215 290 141500 130 215 290 18

1750 80 215 290 22 1800 130 215 290 22 2250 130 215 290 28 2350 80 215 290 30 2400 130 215 290 30

Dim 0 - window opening Dim B - keystone1 No. of standard units

Note: All arches are available as individual bricks or pre-cast units.

A

0

Dim 0 - window opening1 No. of standard units

Note: Guideline for number of units required.Window openings up to 1800mm use tapered bricks.All arches are available as individual bricks or pre-cast units.

Dim 0 A 1

915 215 17 1500 215 24 1800 215 26

2250 215 31

Arch Type 2

Curved arch

A1

D 3

B 2

C

70

A1

D 3

B 2

C

70

A 1

D 3

B 2

C

70

KS.2chamfered

KS.1flat

KS.3extended

Note: KS.3 B2 dimension = 290mm.Keystones are sized to suit the particular span requirements.Dimension A1 andD3 will change according to the span.For further clarification regarding dimensions of brick unitsplease contact our sales staff.

Note: For Dimensions of prefabricated arches see chart for archtype 2 on P27. Other sizes can also be manufactured as required.

A

0

B

A1

Type A1 B2 C D 3

U143 10 215 102 125

U77 30 215 102 140

U144 70 215 102 185

U79 100 215 102 215

U78 130 215 102 240

U80 140 215 102 250

F

D

AB

C

E

1 Ideal span (mm)Note: Other sizes are also available.

Type A B C D E F 1

MAR.1.1 215 102 75 33 159 46 450MAR.1.2 215 102 75 33 173 60 450MAR.1.3 215 102 75 51 159 46 1125MAR.1.4 215 102 75 51 173 60 1125MAR.1.5 215 102 75 42 159 46 675MAR.1.6 215 102 75 42 173 60 675

MAR.1.7 215 102 75 60 159 46 2025MAR.1.8 215 102 75 60 173 60 2025

Pre-fabricated arches

MAR.1 Tapered single cant

AR



30/32

MAR.2 Tapered single bullnose

30

D

AB

C

R

1 Ideal span (mm)Note: Other sizes are also available.

Type A B C D R 1

MAR.2.1 215 102 75 33 25 450MAR.2.2 215 102 75 33 51 450MAR.2.3 215 102 75 51 25 1125MAR.2.4 215 102 75 51 51 1125MAR.2.5 215 102 75 42 25 675MAR.2.6 215 102 75 42 51 675MAR.2.7 215 102 75 60 25 2025MAR.2.8 215 102 75 60 51 2025

A

BC

a

Type A B C

MAR.3 215 102 65 75

Left hand shown

MAR.4 Flat arch keystone

C

A

D

B

8

C

D

E

A

B

8

Type A B C D 1 2

MAR.4.1 215 102 212 55 70 675 8MAR.4.2 215 102 287 130 70 900 10MAR.4.3 215 102 212 55 70 1125 14MAR.4.4 215 102 287 130 70 1350 16MAR.4.5 215 102 212 55 70 1575 20MAR.4.6 215 102 287 130 70 1800 22MAR.4.7 215 102 212 55 70 2025 26

Type A B C D 1 2

MAR.5.1 215 102 212 55 70 675 8MAR.5.2 215 102 287 130 70 900 10

MAR.5.3 215 102 212 55 70 1125 14MAR.5.4 215 102 287 130 70 1350 16MAR.5.5 215 102 212 55 70 1575 20MAR.5.6 215 102 287 130 70 1800 22MAR.5.7 215 102 212 55 70 2025 26

1 Ideal span (mm) 2 No. of voussoirs

1 Ideal span (mm) 2 No. of voussoirs

MAR.6 Flat arch cant voussoir(left or right hand)

MAR.3 Flat arch voussoir(left or right hand)

MAR.5 Flat arch chamferededge keystone

D

BC

A

8

Type A B C D

MAR.6 215 102 65 46 75

Left hand shown

AR - arch bricks and arch systems


31/32

31

C

D

E

A

B

8

C

D

E

A

B

8

Type A B C D E 1 2

MAR.7.1 215 102 212 55 46 70 675 8MAR.7.2 215 102 287 130 46 70 900 10MAR.7.3 215 102 212 55 46 70 1125 14MAR.7.4 215 102 287 130 46 70 1350 16MAR.7.5 215 102 212 55 46 70 1575 20MAR.7.6 215 102 287 130 46 70 1800 22

MAR.7.7 215 102 212 55 46 70 2025 261 Ideal span (mm)2 No. of voussoirs

Type A B C D E 1 2

MAR.8.1 215 102 212 55 46 70 675 8

MAR.8.2 215 102 287 130 46 70 900 10

MAR.8.3 215 102 212 55 46 70 1125 14

MAR.8.4 215 102 287 130 46 70 1350 16

MAR.8.5 215 102 212 55 46 70 1575 20

MAR.8.6 215 102 287 130 46 70 1800 22

MAR.8.7 215 102 212 55 46 70 2025 261 Ideal span (mm)2 No. of voussoirs

MAR.7 Flat cant keystone MAR.8 Flat arch cant andchamfered keystone

AR



32/32

Hanson Building Products222 Peterborough RoadWhittleseyCambridgeshirePE7 1PDTel: 08705 258258Fax: 01234 762040

Email: [email protected]/uk/brickspecials

Quality Assured

Q5001

Hanson UKHanson is one of the UKs largest suppliersof construction materials. Our products includeaggregates, asphalt, ready-mixed concrete,bricks, blocks and cement. We are part of theHeidelbergCement Group, which employs61,000 people across five continents andis the global leader in aggregates and hasleading positions in cement, concrete andheavy building products.

All dimensions are in mm, drawings not to scale and all sizes nominal.The colours in this brochure are as true as can be obtained by the normalprinting process. Hanson is committed to a program of continuous productdevelopment and reserve the right to alter specifications without prior

tifi ti F f th d t i f ti i t l

Documents

B S Brick Specials