AXIS A1001 installation with24 volt lock

Adhere to local life safety code in all installations.Ensure that your power supplies and relays are rated for the intended purposes.Illustration does not depict cabling for reader, REX, Door monitor, battery backup and UPS.

AXIS Entry ManagerProgramming

Application

1. Con�gure Lock 1 for Relay

2. Depending on your lock type, con�gureLock 1 Relay for

Relay open = Locked for a fail-secure lockRelay open = Unlocked for a fail-safe lock

3. Wire the RELAY|PWR connector accordingto the drawing

> One-door solution with 24 V lock

Lock 1:12 V

Relay

Relay Relay open = LockedRelay open = LockedRelay open = Unlocked

READER I/O 1

DOOR IN 1 DOOR IN 2 LOCK

+MIC- +SPK-

AUDIOAUX

A- B+ A- B+ D0 D1 A- B+ A- B+ D0 D1

- 12V

IO3

IO4

IO5

IO6

READER DATA 1 READER DATA 2

DC IN

RELAY | PWR*REL*- - 12

V24V

- H1 - H2- IN1 - IN2 - IN3 - IN4- +

- 3V IO1

IO2

READER I/O 2- 12

VIO7

IO8

IO9

IO10

-+

AXIS T8127 60 W Splitter12/24 V DC

High PoE Switch (802.3at)

24 volt lock

Lock 1

AXIS A1001 installation withdual electric strikes

Voltage is determined by the power supply voltage out.

Adhere to local life safety code in all installations.Ensure that your power supplies and relays are rated for the intended purposes.Illustration does not depict cabling for reader, REX, Door monitor, battery backup and UPS.

AXIS Entry ManagerProgramming

Application

1. Con�gure Lock 1 for 12 V and Fail-secure

3. Depending on your lock type, con�gureLock 2 Relay for

Relay open = Locked for a fail-secure lockRelay open = Unlocked for a fail-safe lock

4. Wire the LOCK connector and theRELAY|PWR connector according tothe drawing

2. Con�gure Lock 2 for Relay

> Simple two-door solution with one doorusing external power

Lock 1:12 V

Relay Relay open = LockedRelay open = LockedRelay open = Unlocked

Fail-secure

Lock 2:12 V

Relay

READER I/O 1

DOOR IN 1 DOOR IN 2 LOCK

+MIC- +SPK-

AUDIOAUX

A- B+ A- B+ D0 D1 A- B+ A- B+ D0 D1

- 12V

IO3

IO4

IO5

IO6

READER DATA 1 READER DATA 2

DC IN

RELAY | PWR*REL*- - 12

V24V

- H1 - H2- IN1 - IN2 - IN3 - IN4- +

- 3V IO1

IO2

READER I/O 2- 12

VIO7

IO8

IO9

IO10

Lock 1 Lock 2

12 volt DCElectric Strike

12/24 volt DCElectric Strike

PoE Switch

Door Power Supply

12/24+12/24-

AXIS A1001 installation with duallocks and external power supply

The AXIS A1001 lock output connects to the separate auxiliaryrelay power input. 12/24 volts DC+ from a separate door powersupply connects to the C terminal of the slave relay. This transfersto the NO terminal, pushing power to the lock.

Adhere to local life safety code in all installations.Ensure that your power supplies and relays are rated for the intended purposes.Illustration does not depict cabling for reader, REX, Door monitor, battery backup and UPS.

AXIS Entry ManagerProgramming

Application

1. Con�gure Lock 1 for 12 V and Fail-secure

3. Depending on your lock type, con�gureLock 2 Relay for

Relay open = Locked for a fail-secure lockRelay open = Unlocked for a fail-safe lock

4. Wire the LOCK connector and theRELAY|PWR connector according tothe drawing

2. Con�gure Lock 2 for Relay

> Two-door solution with high current locks

> Suggested for use with existing power andrelay

Lock 1:12 V

Relay Relay open = LockedRelay open = LockedRelay open = Unlocked

Fail-secure

Lock 2:12 V

Relay

READER I/O 1

DOOR IN 1 DOOR IN 2 LOCK

+MIC- +SPK-

AUDIOAUX

A- B+ A- B+ D0 D1 A- B+ A- B+ D0 D1

- 12V

IO3

IO4

IO5

IO6

READER DATA 1 READER DATA 2

DC IN

RELAY | PWR*REL*- - 12

V24V

- H1 - H2- IN1 - IN2 - IN3 - IN4- +

- 3V IO1

IO2

READER I/O 2- 12

VIO7

IO8

IO9

IO10

Relay

Lock 1 Lock 2

Electric Strike12/24 volt DC12/24 volt DCElectric Strike

Door Power Supply

12/24+ 12/24-12/24+ 12/24-

POS+

C

NC

NO

NEG-

C

NC

NO

PoE Switch

AXIS A1001 installation withdual magnetic locks and external power supply

The AXIS A1001 lock output connects to the separate auxiliaryrelay power input. 12/24 volts DC+ from a separate door powersupply connects to the C terminal of the slave relay. This transfersto the NO terminal, pushing power to the lock.

Adhere to local life safety code in all installations.Ensure that your power supplies and relays are rated for the intended purposes.Illustration does not depict cabling for reader, REX, Door monitor, battery backup and UPS.

AXIS Entry ManagerProgramming

Application

1. Con�gure Lock 1 for 12 V and Fail-secure

3. Depending on your lock type, con�gureLock 2 Relay for

Relay open = Locked for a fail-secure lockRelay open = Unlocked for a fail-safe lock

4. Wire the LOCK connector and theRELAY|PWR connector according tothe drawing

2. Con�gure Lock 2 for Relay

> Two-door solution with high current locks

> Suggested for use with existing power andrelay

Lock 1:12 V

Relay Relay open = LockedRelay open = LockedRelay open = Unlocked

Fail-secure

Lock 2:12 V

Relay

READER I/O 1

DOOR IN 1 DOOR IN 2 LOCK

+MIC- +SPK-

AUDIOAUX

A- B+ A- B+ D0 D1 A- B+ A- B+ D0 D1

- 12V

IO3

IO4

IO5

IO6

READER DATA 1 READER DATA 2

DC IN

RELAY | PWR*REL*- - 12

V24V

- H1 - H2- IN1 - IN2 - IN3 - IN4- +

- 3V IO1

IO2

READER I/O 2- 12

VIO7

IO8

IO9

IO10

12/24 volt Magnetic Lock

Lock 1

12/24 volt Magnetic Lock

Lock 2

Door Power Supply

12/24+ 12/24-12/24+ 12/24-

PoE Switch

Relay

POS+

C

NC

NO

NEG-

C

NC

NO

AXIS A1001 installation withdual integrated locksets

The AXIS A1001 lock output connects to the separate auxiliaryrelay power input. 12/24 volts DC+ from a separate door powersupply connects to the C terminal of the slave relay. This transfersto the NO terminal, pushing power to the lock.

Adhere to local life safety code in all installations.Ensure that your power supplies and relays are rated for the intended purposes.Illustration does not depict cabling for reader, REX, Door monitor, battery backup and UPS.

> AXIS T8127 60 W Splitter 12/24 V DC

High PoE Splitter

> AXIS T81B22 DC 30 W Midspan 1-port> AXIS T8133 Midspan 30 W 1-port> AXIS T8123-E Outdoor Midspan 30 W 1-port

30 Watt Midspan options

AXIS Entry ManagerProgramming

Application

1. Con�gure Lock 1 for 12 V and Fail-secure

3. Depending on your lock type, con�gureLock 2 Relay for

Relay open = Locked for a fail-secure lockRelay open = Unlocked for a fail-safe lock

4.

2. Con�gure Lock 2 for Relay

Wire the LOCK connector and theRELAY|PWR connector according tothe drawing

> Two-door solution with high current locks

Lock 1:12 V

Relay Relay open = LockedRelay open = LockedRelay open = Unlocked

Fail-secure

Lock 2:12 V

Relay

READER I/O 1

DOOR IN 1 DOOR IN 2 LOCK

+MIC- +SPK-

AUDIOAUX

A- B+ A- B+ D0 D1 A- B+ A- B+ D0 D1

- 12V

IO3

IO4

IO5

IO6

READER DATA 1 READER DATA 2

DC IN

RELAY | PWR*REL*- - 12

V24V

- H1 - H2- IN1 - IN2 - IN3 - IN4- +

- 3V IO1

IO2

READER I/O 2- 12

VIO7

IO8

IO9

IO10

IntegratedLockset

Lock 1

Integrated Lockset

Lock 2

Data + Power Data

30 W Midspan

PoE IN

Splitter

12/24- 12/24+

Data OUT

Switch

Relay

POS+

C

NC

NO

NEG-

C

NC

NO

AXIS A1001 installation withdual external auxiliary devices

Adhere to local life safety code in all installations.Ensure that your power supplies and relays are rated for the intended purposes.Illustration does not depict cabling for reader, REX, Door monitor, battery backup and UPS.

> AXIS T8127 60 W Splitter 12/24 V DC

High PoE Splitter

> AXIS T81B22 DC 30 W Midspan 1-port> AXIS T8133 Midspan 30 W 1-port> AXIS T8123-E Outdoor Midspan 30 W 1-port

30 Watt Midspan options

AXIS Entry ManagerProgramming

Application

1. Con�gure Lock 1 for 12 V and Fail-secure

2. Con�gure Lock 2 for 12 V and Fail-secure

4. Wire the LOCK connector according tothe drawing

> Solution for using relays to control devicessuch as HVAC, gates, and other auxiliarydevices

Lock 1:12 V

Relay

Fail-secure

Lock 2:12 V

Relay

Fail-secure

READER I/O 1

DOOR IN 1 DOOR IN 2 LOCK

+MIC- +SPK-

AUDIOAUX

A- B+ A- B+ D0 D1 A- B+ A- B+ D0 D1

- 12V

IO3

IO4

IO5

IO6

READER DATA 1 READER DATA 2

DC IN

RELAY | PWR*REL*- - 12

V24V

- H1 - H2- IN1 - IN2 - IN3 - IN4- +

- 3V IO1

IO2

READER I/O 2- 12

VIO7

IO8

IO9

IO10

Data + Power Data

30 W Midspan

PoE IN Data OUT

Splitter

12/24- 12/24+

Energy Management

(add this wire for wet contact)

Switch

Relay

POS+

C

NC

NO

NEG-

C

NC

NO

Relay

POS+

C

NC

NO

NEG-

C

NC

NO

AXIS A1001 installation withdual magnetic locks

Voltage is determined by the POE splitter voltage out.

Adhere to local life safety code in all installations.Ensure that your power supplies and relays are rated for the intended purposes.Illustration does not depict cabling for reader, REX, Door monitor, battery backup and UPS.

> AXIS T8127 60 W Splitter 12/24 V DC

High PoE Splitter

> AXIS T81B22 DC 30 W Midspan 1-port> AXIS T8133 Midspan 30 W 1-port> AXIS T8123-E Outdoor Midspan 30 W 1-port

30 Watt Midspan options

AXIS Entry ManagerProgramming

Application

1. Con�gure Lock 1 for 12 V and Fail-safe

2. Con�gure Lock 2 for Relay

3. Con�gure Lock 2 Relay for

Relay open = Unlocked (fail-safe lock)

4. Wire the LOCK connector and theRELAY|PWR connector according tothe drawing

> Two-door solution with one 12 V lock andone 12 or 24 V lock

Lock 1:12 V

Relay Relay open = UnlockedRelay open = LockedRelay open = Unlocked

Fail-safe

Lock 2:12 V

Relay

READER I/O 1

DOOR IN 1 DOOR IN 2 LOCK

+MIC- +SPK-

AUDIOAUX

A- B+ A- B+ D0 D1 A- B+ A- B+ D0 D1

- 12V

IO3

IO4

IO5

IO6

READER DATA 1 READER DATA 2

DC IN

RELAY | PWR*REL*- - 12

V24V

- H1 - H2- IN1 - IN2 - IN3 - IN4- +

- 3V IO1

IO2

READER I/O 2- 12

VIO7

IO8

IO9

IO10

Data + Power Data

30 W Midspan

PoE IN Data OUT

Splitter

12/24 volt Magnetic Lock

Lock 2

12 volt Magnetic Lock

Lock 1

12/24- 12/24+

Switch