AVIAT WTM 3300 PRODUCT ORDERING GUIDE - air · PDF file3 AVIAT NETWORKS WTM 3300 PRODUCT ORDERING GUIDE September 17, 2013 1 INTRODUCTION 1.1 PURPOSE The intent of this Product Ordering

WTM 3300 PRODUCT ORDERING GUIDE

September 17, 2013

AVIAT WTM 3300

PRODUCT ORDERING GUIDE

ALL OUTDOOR E-BAND PACKET MICROWAVE RADIO SYSTEM

Revision 003

September 13

2AVIAT NETWORKS


September 17, 2013

CONTENTS

ALL OUTDOOR E-BAND PACKET MICROWAVE RADIO SYSTEM ....................................................... 1

1 INTRODUCTION ................................................................................................................................... 3

1.1 PURPOSE .................................................................................................................................................... 3

1.2 SCOPE.......................................................................................................................................................... 3

1.3 GRAPHICAL CUES ...................................................................................................................................... 3

1.4 AMENDMENT RECORD AND CHANGES .................................................................................................. 3

2 OVERVIEW OF SOLUTION ELEMENTS ............................................................................................ 4

2.1 STANDARD ELEMENTS OF THE SOLUTION: .......................................................................................... 4

2.2 OTHER SOLUTION ELEMENTS ................................................................................................................. 4

3 HOW TO ORDER .................................................................................................................................. 6

3.1 CONFIGURATION EXAMPLE ................................................................................................................... 11

4 SOLUTION ELEMENTS & OPTIONS - IN DETAIL ........................................................................... 13

4.1 WTM 3300 OUTDOOR RADIO (ODR) ...................................................................................................... 13

4.2 MOUNTING KITS AND ACCESSORIES ................................................................................................... 15

4.3 PARABOLIC ANTENNA ............................................................................................................................. 16

4.4 ETHERNET CABLES ................................................................................................................................. 16

4.5 DIRECT 48 VDC POWER FEED ............................................................................................................... 19

4.6 POE INJECTOR OPTIONS ........................................................................................................................ 20

4.7 LICENSES; (SW VER. 1.1) ........................................................................................................................ 23

5 ANCILLARY ITEMS ............................................................................................................................ 24

5.1 INSTALLATION TOOLS ............................................................................................................................. 24

5.2 LIGHTNING ARRESTORS ........................................................................................................................ 25

5.3 CD WITH DOCUMENTATION ................................................................................................................... 27

5.4 SPARES RECOMMENDATION ................................................................................................................. 27

5.5 NETWORK/ELEMENT MANAGEMENT .................................................................................................... 27

5.6 SERVICES .................................................................................................................................................. 28

6 WTM 3300 SOLUTION ELEMENTS PNS ......................................................................................... 30

3 AVIAT NETWORKS


September 17, 2013

1 INTRODUCTION

1.1 PURPOSE

The intent of this Product Ordering Guide is to assist customers and approved resellers when ordering the WTM

3300.

For more detailed information on the WTM 3300, please refer to the technical documentation.

WTM 3300 Product Description (Document Number: 260-668227-001)

WTM 3300 Installation and Operation Manual (Document Number: 260-668226-001)

1.2 SCOPE

The WTM 3300 POG is organized into three main sections.

Section 2: Overview of solution elements

Section 3: How to create an order (bill of materials)

Section 4: Detailed description of solution elements and options

1.3 GRAPHICAL CUES

The following icons function as graphical cues used to characterize particular types of associated supporting

information.

Important notes and instructions denote additional information you may require.

1.4 AMENDMENT RECORD AND CHANGES

Revision Date Document Change Description Editor

001 Jan. 2012 Initial release GJ, JL, UJ

002 June 2013 Updates as per updated product definitions and specifications

-model numbering changed

-new models added without antenna interface

-new models added with PoE interface and with DC interface

GJ

003 Sep 2013 Several updates and minor corrections. GJ

4 AVIAT NETWORKS


September 17, 2013

2 OVERVIEW OF SOLUTION ELEMENTS

Table 2-1 and Table 2-2 provide a high level overview of all WTM 3300 related elements.

2.1 STANDARD ELEMENTS OF THE SOLUTION:

# Element Options Use Reference

WTM 3300 ODR WTM 3310p (Integrated flat 38 dBi antenna with POE)

WTM 3310 (Integrated flat 38 dBi antenna with VDC)

WTM 3305p (Without integrated antenna and with POE)

WTM 3305 (Without integrated antenna and with VDC)

ODR models are selected based on the antenna size required.

Section 4.1

Mounting kit Universal Use to attach the WTM 3300 ODR to a poll or a wall. In certain scenarios a Wall Mount Extension Kit may be required for wall mounting.

Section 0

Antennas Parabolic 0,3 m (1 ft), 44 dBi or

Parabolic 0,6 m (2 ft), 51 dBi

Used with model WTM 3205 Section 4.3

Ethernet Cat5e cable

50 m (164´) Cat 5e cable kit

90 m (295´) Cat 5e cable kit

500 m (1640´) Cat5e bulk cable

Used to connect the WTM 3300 terminal to the ECD (Ethernet Connected Device), typically a base-station, switch or router. A standard Cat5e weatherproof Ethernet cable is used.

Section 4.3

48 VDC power cable

50 m (164´) cable

90 m (295´) cable

500 m (1640´) bulk cable

Used for delivering power to the WTM 3300 ODR. In certain scenarios a PoE injector can be used together with the Cat5e traffic cable.

Section 4.6.2

Table 2-1; Overview of the Standard Solution Elements

2.2 OTHER SOLUTION ELEMENTS

# Element Variants Use Reference

Optional Items

PoE injector -AC PoE injector (110/220 VAC)

-DC PoE injector

(-48 VDC)

-Indoor and Outdoor type

Used for single cable PoE installations. The AC PoE injectors require purchase of a separate power cable and are available for indoor and outdoor use.

Sections 4.6.1 and 4.6.2

Surge Arrestor -Ethernet

-DC

Attached to the traffic cable close to the enclosure/cabin entry point on the Ethernet or DC power cable.

Section 0

Wall-mount extension bracket

Single variant Increases the elevation/azimuth range for wall-mounted WTM 3300 terminals.

Section 0

Ethernet Patch Cables

-2 m (6.5´),

-5 m (16´),

-15 m (49´)

Additional standard (non-weatherproof) Ethernet patch cables used to connect the PoE injector to the ECD (for example)

Section 6

5 AVIAT NETWORKS


September 17, 2013

# Element Variants Use Reference

License Used for enabling additional features, like capacity

Section 4.7

Ancillary Items

Installation and maintenance kit

-Installation and Maintenance kit -Visual alignment kit

An installation and maintenance kit is required by the field technician/engineer carrying out installation and/or maintenance duties. One kit includes alignment and local access tools. Second kit includes visual alignment tool.

Section 5.1.1

CD with Manuals Single variant User documentation in electronic format. Section 5.3

Spare parts Spares can be ordered as per the recommended sparing strategy.

Section 0

Network/Element Management

Provision, Network level EMS for all Aviat products and select 3rd party devices.

Section 5.5

& Provision Ordering Guide

Services Certification and Training

AviatCare Maintenance

Section 5.6

Table 2-2; Overview of Optional Solution Elements

6 AVIAT NETWORKS


September 17, 2013

3 HOW TO ORDER

This section illustrates how to create and order/bill of material for a 1+0 terminal and link.

NOTE: Only one configuration 1+0 is available at this time, either with PoE interface or with

Ethernet and direct 48 VDC interface.

Step 1, Select the ODR

There are two model options available, one with integrated flat antenna and one with antenna interface, further on

product is divided into variant that supports PoE interface and variant that supports Ethernet plus 48 VDC

interface.

Option 1: WTM 3310p with PoE interface

uses a 38 dBi integrated flat antenna and PoE interface. Has the smallest physical/aesthetic foot-print of any of the

WTM 3300 models. In terms of antenna gain – the performance is similar to that of a 0.2 meter (0.6´) parabolic

antenna.

Figure 3-1: WTM 3310 v1 ODR with standard mounting kit

Part Number Description

W3310-80-POE-L01 WTM 3300, 80GHz TxL with integrated 38 dBi Antenna v1, 1xGb PoE, ETSI, 450 Mbps base capacity

W3310-80-POE-H01 WTM 3300, 80GHz TxH with integrated 38 dBi Antenna v1, 1xGb PoE, ETSI, 450 Mbps base capacity

Option 2: WTM 3310 with Ethernet and 48 VDC interface

This uses a 38 dBi integrated flat antenna with Ethernet RJ45 and 48 VDC interface, other characteristics are the

same as under Option 1.


W3310-80-VDC-L01 WTM 3300, 80GHz TxL with integrated 38 dBi Antenna v1, 1xGbE 48VDC, ETSI, 450 Mbps base capacity

W3310-80-VDC-H01 WTM 3300, 80GHz TxH with integrated 38 dBi Antenna v1, 1xGbE 48VDC, ETSI, 450 Mbps base capacity

7 AVIAT NETWORKS


September 17, 2013

Option 3: WTM 3305p with PoE interface

This model comes without integrated antenna, with PoE interface and need to be composed with external

parabolic antenna options. 0.3 m (1 ft) and 0.6 m (2 ft) parabolic antenna options are used to achieve longer

distance links than the WTM 3310. The main trade-off is that WTM 3305 with antenna is larger and heavier

compared to the WTM 3310.

Figure 3-2: WTM 3305 mounted to the 0.3 m (1 ft) parabolic antenna


W3305-80-POE-L01 WTM 3300, 80GHz TxL without integrated Antenna, 1xGb PoE, ANSI/ETSI, 450 Mbps base capacity

W3305-80-POE-H01 WTM 3300, 80GHz TxH without integrated Antenna, 1xGb PoE, ANSI/ETSI, 450 Mbps base capacity

Option 4: WTM 3305 with Ethernet and 48 VDC interface

This model comes without integrated antenna, with Ethernet and 48 VDC interface; other characteristics are the

same as under Option 4.


W3305-80-VDC-L01 WTM 3300, 80GHz TxL without integrated Antenna, 1xGbE 48VDC, ANSI/ETSI, 450 Mbps base capacity

W3305-80-VDC-H01 WTM 3300, 80GHz TxH without integrated Antenna, 1xGbE 48VDC, ANSI/ETSI, 450 Mbps base capacity

NOTE: To create a link a ‘High-band and ‘Low-band’ ODR must be selected for the respective

ends of the link. Sample terminal and link Bills of Material (BOMs) are illustrated in Table 3-6

and in Table 3-5.

8 AVIAT NETWORKS


September 17, 2013

Step 2a, Select the Mount, when W3310 option is needed

Universal mount kit is used when WTM 3310 model is used.

Figure 3-3: WTM 3300 Universal Mounting Kit


WTM3300-ACC-SM1 Universal mount kit, pole or wall

Table 3-1: Universal Mounting Kit

The universal mount kit can be used for both pole and wall mount scenarios. In the case of wall mounting an

additional wall mount extension bracket can be used to create additional clearance and maximum alignment

flexibility (see Section 0).

Step 2b, Select the parabolic antenna, when W3305 option is selected

Parabolic antenna, 0.3 m (1 ft) or 0.6 m (2 ft) is used together with WTM 3305 model.

0.3 m (1 ft) Point to Point Dish provides 44 dBi antenna gain is compliant to ETSI and ANSI regulatory.

0.6 m (2 ft) Point to Point Dish provides 51 dBi antenna gain is compliant to ETSI and ANSI regulatory.

For more details refer to section 4.3.

Step 3, Select the Ethernet cable

The Ethernet cabling distance between the WTM 3300 ODR and the Ethernet Connected Device is limited to a

maximum of 100m in accordance with the Ethernet PHY standards. Table 3-2 shows the Cat5e weatherproof

cable kit options that can be used depending on the required separation distance between the ODR and the ECD.

It should be noted that where an in-line PoE injector is used the 100 m (328´) separation rule still applies – i.e. the

use of an injector does not allow doubling or extending the maximum separation distance.


W3000-ACC-CABK-50 Cable KIT, 50 meters (164´), Cat 5e, Terminated

W3000-ACC-CABK-90 Cable KIT, 90 meters, (295´), Terminated

Table 3-2; Pre terminated Cat5e Cable Kits

NOTE: 90 meters cable is selected to allow for a distance of 10 m between the PoE injector and

the ECD.

9 AVIAT NETWORKS


September 17, 2013

NOTE: Un-terminated 500 meters bulk Cat5e cable options and accessories are also available

and are summarized in section 4.3.

Step 4: Select Power Option

There are two supported options for powering a WTM 3300 ODR:

Option 1: PoE injector

In this scenario, a single Cat5e weatherproof cable is used to deliver both power over ethernet cable (POE) and

traffic to the ODR’s electrical GbE interface (Figure 3-4). It is a useful option in deployment scenarios where a

single cable is desirable. The trade-off comes in the shape of the PoE injector which is deployed (in-line), requires

separate mounding (indoor only) and connection to both the ECD and site power supply. The PoE option offers

flexibility in site scenarios where only 220 VAC or -48 VDC power sources are available.

A listing of PoE injector options is shown in Section 4.6.

Option 2: -48 VDC direct feed

This requires that the ODR is directly connected to a -48 VDC power source at the site over 3 way terminal block

available on the WTM 3300 pigtail cable. Preferred DC cable options for connecting ODR with power source are

listed in below Table 3-3.


W3000-ACC-CAB2-003

Power cable, Gray/Blue conductor, non shielded non terminated, 5 m (16´) 2x16 AWG

W3000-ACC-CAB2-050


W3000-ACC-CAB2-090


W3000-ACC-CAB2-500

Power cable, Gray/Blue conductor, non shielded non terminated, 500 m (1640´) drum; 2x16 AWG

Table 3-3; Power cable options

NOTE: This Power cables are un-terminated and comes without cable ties, for ordering cable

ties refer to section 4.4.3, and select PN 006-371750-000.

NOTE: Un-terminated 500 meters bulk power cable and accessories are summarized in section

4.5.

In effect, this is a two cable solution and offers 100 % zero indoor footprint; traffic and power is delivered to the

ODR on separate cables. In some situations a single cable option may be desirable and this can be achieved

using Option 1; PoE injector.

10 AVIAT NETWORKS


September 17, 2013

Figure 3-4: Power Feed and RJ45 connections on WTM 3300

Figure 3-5: WTM 3310p and W3305p with POE connections

Step 5: Select the Software License(s); (1.1 SW ver.)

Capacity licenses are available as per the tables below: 1 license is required per ODR.

-48 VDC Power Ethernet

Ethernet

11 AVIAT NETWORKS


September 17, 2013

The base models are supplied with QPSK modulation enabled and with 450 Mbps capacity as standard.


W3300-SL-0750 WTM 3300 SW License; up to 750 Mbps capacity


Table 3-4: Capacity Licenses

3.1 CONFIGURATION EXAMPLE

1+0 configuration, using a PoE injector.

Either high-band or low-band is selected per ‘end’ depending on RF planning requirements.

Figure 3-6; W3310p Link with PoE

Item* Part Number Description Qty.

(Terminal)

QTY

(Link)

High-band WTM 3300 ODR

W33aa-bb-ccc-dee

WTM 3300, Terminal, TX HIGH with 450 Mbps default capacity license.

See section 4.1.1 to define exact PN. 1

1

Low-band WTM 3300 ODR

W33aa-bb-ccc-dee

WTM 3300, Terminal, TX LOW with 450 Mbps default capacity license.

See section 4.1.1 to define exact PN.

1

Ethernet Cable Kit

W3300-ACC-CABK-##

Cable KIT, 50 or 90 meters, Cat 5e, Un-Terminated, with connectors, ground strap and plastic bands.

1 2

PoE Injector W3300-ACC-PoE-##

PoE, Power over Ethernet Injector.

Go to Section 4.6 to select AC or DC PoE.

1 2

Power cord 29##-##-00-0#

To select AC Power cords go to section 4.6.1 To select DC Power cords go to section 4.6.2

1 2

Table 3-5; Recommended BOM for WTM 3300 Configurations, with PoE Injector.

PoE

Power ECD

W3310p model

Mounting kit

Ethernet cable kit

PoE injector

PowerECD

PoE110-240 VAC or -48 VDC

Ethernet ConnectionDevice

12 AVIAT NETWORKS


September 17, 2013

1+0 configuration, using a 48 VDC direct power feed.

Either high-band or low-band is selected per ‘end’ depending on RF planning requirements.

Figure 3-7; W3310 Link with direct 48 VDC Power Feed

Item* Part Number Description Qty. (Terminal)

Qty.

(Link)

High-band WTM 3300 ODR

W33aa-bb-ccc-dee WTM 3300, Terminal, TX HIGH with 450 Mbps default capacity license.

See section 4.1.1, to define exact PN. 1

1

Low-band WTM 3300 ODR

W33aa-bb-ccc-dee WTM 3300, Terminal, TX LOW with 450Mbps default capacity license.

See section 4.1.1, to define exact PN.

1

Ethernet Cable Kit

W3300-ACC-CABK-##

Cable KIT, 50 or 90 meters, Cat 5e, Un-Terminated, with connectors, ground strap and plastic bands.

1 2

DC Power Cable Kit

W3300-ACC-CAB2-###

DC power cable, 500, 90 or 500 meters. Refer to section 4.6.2, for more details about all DC cable options

1 2

Surge Arrestors

074-330003-001

W3000-ACC-DCLA

Surge arrestor for RJ45 Ethernet cable and for DC power cable

See section 5.2, for details.

1 2

Table 3-6; Recommended BOM for WTM 3300 Configurations, powered over -48 VDC feed.

Power ECD

W3310 model

Mounting kit

Ethernet cable kit

PowerECD

Ethernet ConnectionDevice

-48 VDC Power Source

Powering Cable

SA SA SA SA

Surge Arestors

13 AVIAT NETWORKS


September 17, 2013

4 SOLUTION ELEMENTS & OPTIONS - IN DETAIL

4.1 WTM 3300 OUTDOOR RADIO (ODR)

The Aviat WTM 3300 is standards based all outdoor E-band radio for 1+0 unprotected configurations. It operates in

common licensed E-band frequency bands: 71 to 76 GHz and 81 to 86 GHz supporting 250 MHz channel spacing

and Ethernet/IP throughput from 360 Mbps and up to 1 Gbps in 1.x SW version.

The WTM 3300 provides native Ethernet transport for packet communications and is capable of operating as a

standalone Ethernet link or integrated with third party Ethernet equipment vendors via an industry standard

100/1000 BaseT interface.

WTM 3300 is simple to install. It is managed by an in-band IP/Web based Craft Tool called ePortal or by CLI. WTM

3300 supports local and network-wide element management. It uses SNMP for integration with higher level

network management systems.

Antenna is integrated in the ODR housing at WTM 3310 option and requires therefore no additional mounting

procedures while deploying. WTM3305 comes without integrated antenna but is compatible with high gain 3rd

party

external parabolic 0.3 m (1 ft) or 0.6 m (2 ft) parabolic antenna.

The drawings in Figure 4-1 illustrate the WTM 3300 ODR and its interfaces.

Figure 4-1; WTM 3300 ODR Interfaces

4.1.1 WTM 3300 ODR PART NUMBER STRUCTURE

The alpha numeric WTM 3300 part number is structured as shown in Figure 4-2. Each element of the part number

is further explained in Table 4-1. WTM 3300 part number represents a single terminal. A terminal equals 1 x WTM

3300 ODR.

W33aa-bb-ccc-dee

Figure 4-2; WTM 3300 ODR Part Number (PN) Structure

A detailed description of what each of the underlined characters represents is provided in table below.

Ground Lug Aux Power Local

Maintenance

PortPoE or GE

14 AVIAT NETWORKS


September 17, 2013

PN element Meaning Permitted

Characters

Represents

W33aa ODR model

aa ODR antenna option 05

10

15

Without integrated antenna

Integrated 38 dBi antenna

Integrated 43 dBi antenna* (available in Q2 CY2014)

-bb Band definition 80 80 GHz

-ccc Powering option POE

VDC

POE Interface

GE&48 VDC interface

-d Definition of High band or Low band L

H

Low band transmit. High band transmit.

ee Hardware revision 01

02

Current Active Hardware revision

Future HW revision with smaller Antenna (available in Q2 CY2014)

Table 4-1; WTM 3300 PN Structure






BOM 1 x WTM 33##e ODR, with PoE cable tail.

1 x Earth strap

1 x PoE Cable joiner

1 x QSG

Table 4-2; WTM 3300 ODR PNs with PoE interface






BOM 1 x WTM 33##e ODR, with PoE and 48 VDC cable tails.

1 x Earth strap

2 x Cable joiners for PoE and for DC

1 x QSG

Table 4-3; WTM 3300 ODR PNs with GE & DC interface

15 AVIAT NETWORKS


September 17, 2013

4.2 MOUNTING KITS AND ACCESSORIES

WTM 3300 terminal can be mounted on a pole or on a wall.

Universal mount kit enables mounting on a pole or on a wall. The universal mounting kit supports installations on a

pole with diameter range from 40 mm (1.5˝) to 115 mm (4 ½˝) or on a wall.

Universal Mounting Kit


W3300-ACC-SM1 Universal mount kit, pole or wall

BOM 1 x ODR alignment mechanism with universal pole and wall mounting bracket

1 x Clamp plate for pole mounting

2 x M8 x 180 mm bolt for pole mounting

2 x M8 nut for pole mounting

2 x M8 washer for pole mounting

1 x Bag with 4x M6x12 screws and 4x split washers for ODR attachment

Figure 4-3: Universal Mounting Kit with BOM

Wall Mount Extension Bracket

The optional wall mount extension bracket enables further stand-off from the wall. It allows the ODR to be mounted

at greater angles from the wall. Incline planes with threaded holes for attaching the ODR enable installation at

greater angles. Refer to Product Description for further details and specifications.

Figure 4-4; Wall Mount Extension Bracket with BOM


W3300-ACC-WM1 Wall mount extension bracket

BOM 1 x Wall Extension Bracket

1 x Bag with 4 pcs steel anchor bolts for mounting to concrete wall

16 AVIAT NETWORKS


September 17, 2013

4.3 PARABOLIC ANTENNA

0.3 m (1 ft) or 0.6 m (2 ft) parabolic antenna options are used together with WTM 3305 model. 0.3 m (1 ft) Point to

Point Dish provides 44 dBi antenna gain and is compliant to ETSI and ANSI regulatory. 0.6 m (2 ft) Point to Point

Dish provides 51 dBi antenna gain and is compliant to ETSI and ANSI regulatory.

Figure 4-5; 1ft and 2ft parabolic antenna


W3300-ANT-1FT01 E-Band, 43 dBi Dish Antenna for WTM 3305 ODR ETSI/ANSI

W3300-ANT-2FT01 E-Band, 50 dBi Dish Antenna for WTM 3305 ODR ETSI/ANSI

BOM 1 x Dish Antenna

1 x Mounting kit

This antenna comes with its own mounting kit and so it is not needed to add to the

configuration Standard WTM 3300 mounting kit.

4.4 ETHERNET CABLES

Two pre-terminated cable kit variants are available to connect ODR with indoor equipment, or with PoE injectors.

Ethernet cable is connected to RJ-45 connection available on Pigtail as shown on below Figure 4-6. For details

about each kit refer to the tables below.

Figure 4-6; RJ-45 connection on Pigtail Cable with Weatherproof Coupling Unit

17 AVIAT NETWORKS


September 17, 2013

4.4.1 50 M (164´) ETHERNET CABLE KIT



BOQ: 1 x; Cat 5e cable; 4x2x24 AWG STP CAT5E, 50 m (164´), terminated

50 x; plastic bands 450x7,5 mm (17x .3”)

1 x; Grounding cable (also included in W3300 ODR package)

1 x; weather proofing kit

2 x; RJ45 connector

Table 4-4; 50 m (164´) Cable Kit

4.4.2 90 M (295´) ETHERNET CABLE KIT



BOQ: 1 x; Cat 5e cable; 4x2x24 AWG STP CAT5E, 90 m (295´), terminated

100 x; plastic bands 450x7,5 mm (17x .3”)

1 x; Grounding cable (also included in W3300 ODR package)

1 x; weather proofing kit

2 x; RJ45 connector

Table 4-5; 90 m (295´) Cable Kit

NOTE: The cable kits described above are fully pre-terminated. Where the length is not suitable,

they can be shortened and terminated with spare RJ-45 connectors that are included in the kit.

NOTE: 90 m (295´) cable is selected to allow for a distance of 10 m (33´) between the PoE

injector and the ECD.

4.4.3 OTHER ETHERNET CABLE OPTIONS

In case the predefined 50 m or 90 m cable kits are not suitable for the installation, cable, connectors and other

pieces of cable installation equipment can be specified individually and ordered separately.

Cat 5e Cable (on a Drum)

Figure 4-7; Cat 5e Cable

18 AVIAT NETWORKS


September 17, 2013


W3000-ACC-CAT5-500 Cat 5e cable 500 m (1640´) drum; 4x2x24 AWG FTP

RJ45 Connectors

Figure 4-8; RJ45 Shielded Plugs


W3000-ACC-RJ45 RJ45 shielded connector kit (two pcs)

Cable Ties

Figure 4-9; Plastic cable ties


006-371750-000 CABLE TIE KIT, 50 PCS

Weather Proofing Kit

Figure 4-10; Weather Proofing Kit


011-390001-001 WEATHERPROOFING KIT

Earth Strap

Figure 4-11; Grounding Cable


037-579300-001 EARTH STRAP, ODU, LUG M6 TO TWIN M6, 2 m (6.5´)

19 AVIAT NETWORKS


September 17, 2013

NOTE: Ethernet cable termination is needed at both ends. Refer to below Crimp tool that is

needed to be able to properly crimp the connector.

Crimp Tool

Figure 4-12; Crimp Tool


008-311001-001 CRIMP TOOL, RJ45 EDGE ODU CABLE

4.5 DIRECT 48 VDC POWER FEED

WTM 3300 can be powered using a direct 48 VDC power feed. 3-way terminal block is available on the separate

pigtail cable as shown on below Figure 4-13. This port can be used if the deployment site is equipped with its own

48 VDC power source.

Figure 4-13: 3-way terminal block on Pigtail Cable for Direct 48 VDC Powering

For powering the ODR, a standard two wire shielded cable can be used with AWG as per below table or coaxial

cable RG 213 or CNT-300.

DC Cable Gage (AWG)

Cable length ≤ 50 m (164´) 21

100 m ≤ Cable length ≤ 300 m (984´) 16

20 AVIAT NETWORKS


September 17, 2013

The following Power cable options are available:


W3000-ACC-CAB2-003 Power cable, Gray/Blue conductor, non shielded non terminated, 3 m (9.8´) 2x16 AWG

W3000-ACC-CAB2-050 Power cable, Gray/Blue conductor, non shielded non terminated, 50 m (164´) 2x16 AWG


W3000-ACC-CAB2-500 Power cable, Gray/Blue conductor, non shielded non terminated, 500 m (1640´) drum; 2x16 AWG

NOTE: This Power cables are un-terminated and comes without cable ties, for ordering cable

ties refer to section 4.4.3, for PN 006-371750-000.

4.6 POE INJECTOR OPTIONS

4.6.1 110~240 VAC POE INJECTOR


W3000-ACC-POE-AC1 WTM 3000 Series POE Injector, 100~240 VAC, Non-Managed, power cord NOT included

Table 4-6: 110~220 VAC PoE

Figure 4-14; PoE Injector

Applicable power cords for 100~240 VAC PoE injectors are listed in Table 4-7 and must be ordered separately

depending on the country of installation.

AC Power Cords

110~240 VAC power cords are used with the AC PoE injector at the shelter. Several different plug options are

available to suit local market requirements. All available types are listed in Table 4-7; Available AC Power Plugs.

21 AVIAT NETWORKS


September 17, 2013

Part Number Description Details

2921-01-00-00 Power Cord, IEC 60320-

C13 to EUROPEAN

(SCHUKO) CEE 7/7 RA

PLUG, 2.5 m (8´)

2921-02-00-00 Power Cord, IEC 60320-

C13 to INDIAN BS 546 RA

PLUG, 2-2.5 m (6.5-8´)

2921-03-00-00 Power Cord, IEC 60320-

C13 to KENYA 3 PIN

BS1363 RA PLUG, 2.5 m

(8´)

2921-04-00-00 Power Cord, IEC 60320-

C13 to SOUTH AFRICA 3

PIN BS546 RA LARGE

PLUG, 2.5 m (8´)

2940-04-00-01 Power Cord, IEC 60320-

C13 to NORTH AMERICA

PLUG, 2-2.5 m (6.5-8´)

2921-06-00-00 Power Cord, IEC 60320-

C13 to AUSTRALIA AS

3112 PLUG, 2.5 m (8´)

Table 4-7; Available AC Power Plugs

NOTE: Supported PoE devices are specifically matched to WTM 3300. Use of an alternative PoE

device is not recommended unless authorized by Aviat Networks product management.

Damage to WTM 3300 due to using an incorrect PoE injector will not be covered by warranty.

22 AVIAT NETWORKS


September 17, 2013

4.6.2 48 VDC POE INJECTOR


W3000-ACC-POE-DC1 WTM 3000 Series POE Injector, -37~-57 VDC, Non-Managed, 3-pin power connector included

Table 4-8: -48 VDC PoE

Figure 4-15; -48 VDC PoE injector and Power Supply Connector

NOTE: Supported PoE devices are specifically matched to WTM 3300. Use of an alternative PoE

device is not recommended unless authorized by Aviat Networks product management.

Damage to WTM 3300 due to using an incorrect PoE injector will not be covered by warranty.

4.6.3 OTHER POE INJECTOR TYPES, WITH NON GURANTED PERFORMANCE

Beside Indoor 200 VAC PoE injector and Indoor 48 VDC POE injector, other PoE injector types

are also in process to be qualified, below table shows the list of all special POE injectors that

were not yet fully qualified and tested. For this PoE injectors we cannot guarantee performance

and are available only in limited quantities, for more details consult with product management,


W3000-ACC-POE-AC2 WTM 3000 Series POE, Indoor, 100~240 VAC, Non-Managed, GR-1089 surge protection, without power cord

W3000-ACC-POE-O-AC2 WTM 3000 Series POE, Outdoor, 100~240 VAC, Non-Managed, GR-1089 surge protection, with non-terminated power cord

W3000-ACC-POE-O-AC3 WTM 3000 Series POE, Outdoor, 100~240 VAC, Non-Managed, GR-1089 surge protection, with NA power cord

W3000-ACC-POE-O-DC1 WTM 3000 Series POE, Outdoor, 37~57 VDC, Non-Managed, without power cord

W3000-ACC-POE-DC2 WTM 3000 Series POE, Indoor, 10~36 VDC, Non-Managed, without power cord


23 AVIAT NETWORKS


September 17, 2013

Figure 4-16; Outdoor PoE injector

4.7 LICENSES; (SW VER. 1.1)

In the future SW version 1.1 and SW version 1.2, WTM 3300 will support capacity licenses and several different

feature licenses. By default, WTM 3300 is shipped with 450 Mbps payload capacity and with no licensed feature

enabled.

All licenses listed in Table 4-9 are specific to the WTM 3300 series and must be specified as separate line items at

each order and next to the corresponding ODR.

4.7.1 CAPACITY LICENSES

Capacity licenses available for the WTM 3300 are listed in Table 4-9. To see the link capacities supported by the

WTM 3300, and the nominal Ethernet throughput and latency figures for each capacity, go to WTM 3300 Product

Description and Technical Specification.




Table 4-9; Capacity Licenses

For more details on each of these licenses, refer to WTM 3300 Product Description.

24 AVIAT NETWORKS


September 17, 2013

5 ANCILLARY ITEMS

5.1 INSTALLATION TOOLS

5.1.1 INSTALLATION AND MAINTENANCE KIT

Installation and maintenance kit includes console cable for local management access, RSSI measurement cable

for voltmeter and Factory reset plug.

The RSSI measurement cable is used to measure the signal level during installation or maintenance. The cable is

inserted into the LMC interface (Local Maintenance and Commissioning Interface) during the installation or

maintenance procedure.

These are optional accessories but are recommended that each field engineer carries one kit.


W3300-ACC-IMK1 WTM 3300 ODR, Installation and Maintenance kit.

BOQ: 1 x ; Console cable

1 x ; RSSI measurement cable

1 x ; Factory reset plug

Figure 5-1: RSSI Adapter Cable for

Connecting Voltmeter to the ODR

Figure 5-2: Local Console Cable Figure 5-3: Factory Reset Plug

5.1.2 VISUAL ALIGNMENT KIT (NOT YET AVAILABLE)

Visual alignment tool enables precise and quick alignment with optical field glass. The tool is compatible with all

WTM 3300 models.


W3300-ACC-IMK2 WTM 3300 ODR, Visual alignment kit

Figure 5-4; Visual Alignment Tool - Monocular

25 AVIAT NETWORKS


September 17, 2013

5.2 LIGHTNING ARRESTORS

Ethernet and DC Lightning arrestors are available as an optional accessory that can be used at

areas with frequent lightning strikes. It is highly recommended to use surge protection to

protect indoor ECD and Powering devices.

This is particularly recommended for configurations where WTM 3300 is powered over Direct 48

VDC power feed and when Ethernet cable is connected directly to ECD without PoE injector.

Lightning arrestors are mountable to the DIN rail, DIN rail is not part of the kit and needs to be

sourced separately.

Ethernet interface and DC power interface at WTM 3300 are protected with an internal surge arrestor. PoE injector

interface is also protected with surge arrestor.

RJ 45 Ethernet Lightning protector

The recommended arrestor for WTM 3300 site installations is part number 074-310003-001.

This surge arrestor is installed at building entry for protecting equipment from surges carried down Ethernet cable

connecting indoor and outdoor equipment. Indoor connection from the surge arrestor to the PoE injector or to the

ECD may use a standard Ethernet patch cable.

Figure 5-5; RJ45 Surge Arrestor


074-330003-001 LIGHTNING ARRESTOR, RJ45, IEC61000, PoE, GE

DC Lightning protector

The recommended arrestor to be used on Ethernet cable at cabinet entry point is 074-330003-001, shown on

Figure 5-5 and the recommended arrestor to be used on power cable at cabinet entry point is 179-530062-002,

also shown on Error! Reference source not found..

26 AVIAT NETWORKS


September 17, 2013

Figure 5-6; DC-Din type Lightning Arrestor


W3000-ACC-DCLA Surge protector, 48 VDC, 50 A max., IP20 Indoor, DIN type

27 AVIAT NETWORKS


September 17, 2013

5.3 CD WITH DOCUMENTATION

NOTE: All up-to-date documentation is available for downloading at Aviat Networks support

site (http://support.aviatnetworks.com/homepage.aspx).

In case WTM 3300 related documentation needs to be ordered on a CD ROM, contact Product management, to

provide orderable PN for the CD ROM with WTM 3300 User Documentation. Below listed documents in PDF

format are available on a CD:

Installation and Operations Manual

CLI Guide

Product Description

Aviat Networks Best Practices Guide

5.4 SPARES RECOMMENDATION

It is recommended that even for very small network at least one ODR spare unit on Low band and on High band is

ordered. This is to ensure that if a fault occurs, it can be quickly resolved.

Component Less than 100 of the same Component

100 to 500 of the same Component

500 to 1000 of the same Component

WTM 3300 Low Tx 2.00% 1.00% 0.50%

WTM 3300 High Tx 2.00% 1.00% 0.50%

PoE 4.00% 3.00% 1.80%

Surge arrestor 3.00% 2.00% 1.00%

5.5 NETWORK/ELEMENT MANAGEMENT

Aviat Networks ProVision is the EMS solution for all Aviat Networks current and legacy devices, including many of

our partner product devices.

Refer to the relevant Provision Product Ordering Guide (POG) for further information on ordering Provision

software for use with WTM 3300.

28 AVIAT NETWORKS


September 17, 2013

5.6 SERVICES

5.6.1 AVIATCARE SLA SERVICES

NOTE: Our AviatCare SLA program includes two bundled services focused on offering

customers a higher level of support beyond that of our standard warranty.

Extended Warranty

Extends the standard warranty coverage and increases responses to support requests from 8x5 only to 24x7x365

coverage.

WarrantyPlus

Enhanced level of support that expands Aviat Networks Standard Warranty to include 24x7x365 priority technical

support, advanced replacements, software maintenance, and repair logistics, where we pick up equipment needing

repairs directly from the customer.

Various AviatCare support options are available for customers in every region the WTM 3300 are sold. Durations

for these AviatCare branded Support services can range up to 5 years. Longer the service is signed up for with the

equipment the higher the discount will be off of list for the service – helping drive lower TCO for the product over

time. Customized support plans can be offered to meet the customer’s specific requirements relative to On-site

Support, Spared Management, Corrective Maintenance, Preventive Maintenance, and even Remote Monitoring of

the equipment if required.

Customers who sign up for AviatCare Support at least once are more likely to continue to purchase AviatCare

Support going forward. They also gain from reduced financial administrative processing: a single PO versus

multiple, per event or per release POs.

Please talk with your regional Support Services prime to understand fully what can be offered for your customer

relative to the WTM 3300.

Part number structure

The alpha numeric Services part number is structured as shown in. Each element of the part number is further

explained in Table 5-1 WTM 3300 part number represents a single terminal. A terminal equals 1 x WTM 3300

ODR.

Saa-bbXXA###cc##

Figure 5-7; WTM 3300 ODR Part Number (PN) Structure

A detailed description of what each of the underlined characters represents is provided in table below.

29 AVIAT NETWORKS


September 17, 2013

PN element Meaning Permitted

Characters

Represents

aa Region AF

AP

EM

LA

NA

AFRICA

ASIA

EMER

LATAM

NA&C

bb Service type EW

BW

RL

AR

SP4HL

SPNDL

Extended Warranty (ADVANCED REPLACEMENT)

WARRANTY PLUS IW

REPAIR LOGISTICS

ADVANCE REPLACEMENT

SPARES MANAGEMENT 4 hors

SPARES MANAGEMENT Next day

### Service Code

cc Duration 09

12

24

36

09 MONTHS

12 MONTHS

24 MONTHS

36 MONTHS

## Service Code

Table 5-1; WTM 3300 Service PN Structure

5.6.2 TRAINING SERVICES

For information on arranging or booking WTM 3300 training courses, contact Aviat Networks Training Services at

this email address: [email protected].

mailto:[email protected]

30 AVIAT NETWORKS


September 17, 2013

6 WTM 3300 SOLUTION ELEMENTS PNS

Aviat PN Description

WTM 3300









WTM 3300 Accessories

W3300-ACC-SM1 WTM 3300 ODR, Universal mount kit, pole or wall

W3300-ACC-WM1 WTM 3300 ODR, Wall mount extension bracket

W3300-ACC-IMK1 WTM 3300 ODR, Installation and Maintenance kit

W3300-ACC-IMK2 WTM 3300 ODR, Visual alignment kit

WTM 3300 Antennas/couplers

W3300-ANT-1FT01 E-Band, 43 dBi Dish Antenna for WTM 3305 ODR, ETSI/ANSI

W3300-ANT-2FT01 E-Band, 50 dBi Dish Antenna for WTM 3305 ODR, ETSI/ANSI

POE injectors

W3000-ACC-POE-AC1 WTM 3000 Series POE, Indoor, 100~240 VAC, Non-Managed, without power cord

W3000-ACC-POE-O-AC2 WTM 3000 Series POE, Outdoor, 100~240 VAC, Non-Managed, GR-1089 protection, nonterminated power cord

W3000-ACC-POE-DC1 WTM 3000 Series POE, Indoor, 37~57 VDC, Non-Managed, without power cord


Power cords for POE injectors

2921-01-00-00 Power Cord, IEC 60320-C13 to EUROPEAN (SCHUKO) CEE 7/7 RA PLUG, 2.5 m (8´)

2921-02-00-00 Power Cord, IEC 60320-C13 to INDIAN BS 546 RA PLUG, 2-2.5 m (6.5-8´)

2921-03-00-00 Power Cord, IEC 60320-C13 to KENYA 3 PIN BS1363 RA PLUG, 2.5 m (8´)

2921-04-00-00 Power Cord, IEC 60320-C13 to SOUTH AFRICA 3 PIN BS546 RA LARGE PLUG, 2.5 m (8´)

2940-04-00-01 Power Cord, IEC 60320-C13 to NORTH AMERICA PLUG, 2-2.5 m (6.5-8´)

2921-06-00-00 Power Cord, IEC 60320-C13 to AUSTRALIA AS 3112 PLUG, 2.5 m (8´)

DC cable for powering

W3000-ACC-CAB2-003 Power cable, Gray/Blue conductor, non shielded non terminated, 3 m (9.8´) 2x16 AWG



31 AVIAT NETWORKS


September 17, 2013

W3000-ACC-CAB2-500 Power cable, Gray/Blue conductor, non shielded non terminated, 500 m (1640´) drum; 2x16 AWG

Indoor patch cables

037-579124-002 ETHERNET CABLE, RJ45 CAT 5/CAT 5e, 2 m (6.5´)

037-579125-002 ETHERNET CABLE, RJ45 CAT 5/CAT 5e, 5 m (16´)

037-579126-002 ETHERNET CABLE, RJ45 CAT 5/CAT 5e, 15 m (49´)

Ethernet Cable Kits



Ethernet Cables & cable Accessories

W3000-ACC-CAT5-500 Cat 5e cable 500 m (1640´) drum; 4x2x24 AWG FTP

W3000-ACC-RJ45 RJ45 shielded connector kit (two pcs)

006-371750-000 CABLE TIE KIT, 50 PCS

011-390001-001 WEATHERPROOFING KIT

037-579300-001 EARTH STRAP, ODU, LUG M6 TO TWIN M6, 2 m (6.5´)

Surge arrestor

074-310003-001 Lightning Arrestor, RJ45 GE, IEC61000

W3000-ACC-DCLA Surge protector, 48 VDC, 50 A max., IP20 Indoor, DIN type

32 AVIAT NETWORKS


September 17, 2013

WWW.AVIATNETWORKS.COM

Aviat, Aviat Networks, and Aviat logo are trademarks or registered trademarks of Aviat Networks, Inc.

© Aviat Networks, Inc. (first year in print - last year updated) All Rights Reserved.

Data subject to change without notice.

Documents

AVIAT WTM 3300 PRODUCT ORDERING GUIDE - air · PDF file3 AVIAT NETWORKS WTM 3300 PRODUCT ORDERING GUIDE September 17, 2013 1 INTRODUCTION 1.1 PURPOSE The intent of this Product Ordering