Avdel SpeedFastening En

7/30/2019 Avdel SpeedFastening En

1/24

Speed

Fastening

Systems

Holding your world together


2/24

For ast and reliable assembly processes Avdel

Speed Fastening technology oers the most eective

blind astening solution.

High precision, system-compatible unction, ease o

operation and quick processes are guaranteed because

you can asten continuously rom magazine or bowl ed

asteners and thus place up to 60 asteners per minute.

Avdel Speed Fastening Systems can be used to assemble

metal and plastics, composite material and electronic

components. With an average cycle time o less than two

seconds these systems provide a ast installation rom one

side (blind).

Avdel Speed Fastening Systems provide the possibility to

signicantly cut your assembly cost: short cycle times

increase the productivity, and the intrinsic reliability o

the process reduces rework and other quality costs. Avdel

Speed Fastening Systems are suited or use in small,

medium and large batch processes as well as continuous

production lines.

For smaller batches Avdel oers a choice o powertools and

simple assembly workstations. For larger batches, multihead

systems oer a cost eective solution. For continuous fow

lines Avdel has the technology to develop ully automated

assembly systems. In every case we not only see ourselves

as a provider o asteners, tools and machines but as a

development and system partner with the objective o hel-

ping our customers improve their assembly perormance.

Together with our customers we develop blind astening

systems that simpliy your production process and improvethe quality o your products.

Reduce Assembly Costs


3/24

Contents Page

Systems Range Overview

Avdel Speed Fastening Systems

Range Overview

Speciying a Speed Fastening System

Selection Guide

4

5

6 7

8

The Range o Avdel

Speed Fasteners

Briv

Chobert

Grovit

Rivscrew & Rivscrew PL

Avtronic

Avsert

Avlug

9

10

11

1 1

14

15

16

Installation Equipment

Installation Systems

Handtools

Workstations

Assembly Workstations

17

18 19

0

1

The Range o Avdel Blind Fastening Systems


4/24

4

T

ime

140

10

100

80

60

40

0

0

10 0 0 40 50 60 70 80

Placed Rivets

Avdel speed astening is a unique assembly system designed or rapid and reliable astening in medium and high volume

applications.

Originally designed or the aviation industry, Avdel Speed Fastening Systems are now used by many o the worlds

oremost manuacturing companies in sectors as diverse as household goods, lighting, electronic subassemblies, light

metal abrication and automotive. Avdel speed asteners are available in a wide range o materials, nishes, lengths

and diameters and are ideal or astening metals, plastics, composites and electronic components.

Speed asteners are single piece asteners which are either magazine ed or ed via a vibrating bowl to a wide choice o

installation equipment. This ranges rom the ultra-lightweight 75 handtool to ully automated, state o the art assembly

systems.

Benets o assembly

AvdelSpeed Fastening Systems

Increased manufacturing throughput

An Avdel Speed Fastening System can be ully optimised to

give cycle times o less than two seconds. This rapid, blind

sided process delivers a throughput up to our times greater

than a traditional threaded or riveted solution.

Reduced component handling

The asteners are ed via a magazine or into a bowl eeder.

This eliminates the need or individual component handling,

saves time and reduces the potential or operator injury.

No component spillage

Because the asteners are held captively they should not be

dropped onto the foor or into the application. This avoids

wasted time and improves product quality while improving

the working environment.

No stem loss

Traditional breakstem asteners all too oten suer rom

stem loss once installed. This can lead to application

rattle, electrical short circuits or worse. Speed asteners

have no stems.

Improved joint quality

Speed installation technology provides a consistent, repea-

table joint. Whats more, unlike threaded asteners, there

is no requirement or torque control no more problems o

stripped holes or loose joints.

Improved joint performance

Once installed speed asteners give excellent clamp up,

shear and tension perormance. They are also virtually

immune rom vibration loosening.

Process exibility

Avdel Speed Fastening Systems can be used or low volume,

o-line batch or jobbing shop work through to fow line

processes. From hand held tools to multiheaded modular

workstations, we can design a Speed Fastening System to

suit your assembly requirements. A wide variety o products

in many industries are assembled with these systems

including automotive, electronics, domestic appliance and

general industrial.

Breaks

temSy

stems

SpeedFaste

ningSyste

ms

Time Analysis

Avdel Speed Fastening is

the more ecient system

ater only 10 placed rivets.


5/24

5

Briv Aluminium Alloy

Steel

Stainless Steel

Brass

Bulbed tail

Large headorm

High clamp and shear

Rivscrew Steel Threaded astener

Removable with hex key

and reusable

Fastens into materials up to

Vickers hardness 105 Hv5

Chobert Aluminium Alloy

Steel

Brass

Internal tapered bore

Controlled clamp

High shear

Ideal or sot and brittle

materials

Grovit Aluminium Alloy

Steel

Designed or blind hole

applications

Annular grooves on body

For use in wood, plastics

breglass and aluminium

Avtronic Brass

Aluminium Alloy

Attaches DIN 4161 connectors

and other components to PCBs

Annular grooves on body

Avsert Brass Threaded stand-o pillars or PCBs

Internally threaded bore

Many stand-o heights

Avlug Brass Solderable terminal posts or PCBs

Rolled/knurled shank

Assembly with standard tool Fasteners ed via a vibrating bowl Magazine ed asteners

Range OverviewBrand Material Key eatures


6/24

6

Speciyinga Speed Fastening SystemTo optimise the perormance o your Avdel Speed Fastening System it is important to select the correct combination o

astener, nose equipment, mandrel and ollower spring. It is also critical to ensure that the combination selected is suited

or use with your choice o installation process. I you need any help in speciying the required components then do not

hesitate to contact your local Avdel representative. Further inormation on corrosion, saety and RoHS can be ound on

our website www.avdel-global.com.

Standard Fasteners

Rivscrew, Briv & Chobert

Removability

Rivscrew asteners are ideal

or applications requiring

disassembly or repair or

rework. They can simply be

unscrewed using a standard

hexagonal allen key.

Clamp

Briv asteners should be

specied in applications

requiring high clamploads. Chobert asteners

provide a lighter, controlled

clamp making them ideal

or soter or low strength

materials.

Head Type

Fasteners are available

with dome head. Briv and

Chobert are also available

with countersunk headorm.

Other head diameters may

also be available as specials

please contact your local

Avdel representative.

Specialist Fasteners

Avtronic

Designed or attaching DIN

and other connectors, card

ejectors and heatsinks to

printed circuit boards.

Avsert

Cost eective stand-o

pillars or printed circuit

boards.

Avlug

Cost eective terminal posts

or printed circuit boards.

Fastener Material &

Surface Finish

Avdel speed asteners are

available in stainless steel,

steel, aluminium and brass.

The choice o material

should be made on the basis

o perormance (shear and

tensile strength), suitability

or use with the parent

material and corrosion

resistance. For perormance

data please see the relevanttechnical data sheets.

Fastener Selection


7/24

7

The surace nishes or Avdel speed asteners are as ollows:

1. . .

Typical placing sequence

1. The mandrel with pre-loaded

astener is located in the hole.

. Tool activation pulls the mand-

rel through the astener, expan-

ding it within the hole to provide

high clamp and secure joints.

. At the end o the installation

cycle, the next astener is auto-

matically delivered to the nose

o the tool, ready to repeat the

assembly process.

Steel Zinc plate and

clear passivation

Option:

Enamel paint

Zinc nickel

Organic coatings

Aluminium Alloy Natural

Option:Anodising

Enamel paint

Stainless Steel Polished

Brass Brightened or hot tin dipped

(or solderability)

Please visit our website www.avdel-global.com or astener placing animations.


8/24

88

Selection GuideThis table is designed as a guide to help you select the most suitable Avdel speed astener or your particular application. Full

technical and perormance data or each speed astener can be ound on our website or contact your local Avdel representative.

*Rivscrew

17 - the placed head orm depends on the nose equipment used, standard Rivscrew

nose equipment gives a dome head orm.

Our policy is one o continuous product development and improvement and we reserve the right to change the specication o any product

without prior notice.

Product

Range

Material Finish Head-

orm

Fastener Size (nom) Thread

Size

Natural

ZincPlated

Polishedor

Brightened

ElectroTin

Plated

TinPlated

Dome

Countersunk

1.6mm(

1/16")

.4mm(

/")

.5mm

.8mm

.0mm

.mm(

1/8")

.5mm

4.0mm(

5/")

4.5mm

4.8mm(

/16")

6.0mm

6.4mm(

1/4")

M.5

M

SeriesNo.

PageNo.

Briv

Aluminium Alloy

(5% Mg) 1801

9

Aluminium Alloy

(5% Mg)

180

Steel 181

Steel 18

Brass 18

Stainless Steel 1841

Chobert

Steel 111

10Aluminium Alloy

(.5% Mg) 111

Brass 114

Grovit Steel 1101

11Aluminium Alloy

(.5% Mg) 110

Rivscrew*

RivscrewP

LSteel 17 1

Steel 174 1

Avtronic Brass 1188

14Aluminium Alloy

(5% Mg) 1189

Avsert Brass 1117

15

Brass 1118

Avlug

Brass 1107 16


9/24

9

Please visit our website ww w.avdel-global.com or astener placing animations.

Specications

Sizes:

.4 mm (/) to 6 mm

Materials:

Aluminium alloy, steel,

stainless steel and brass

Headorms:Dome, countersunk

BrivHigh Shear, High Clamp FastenersSpeed (repetition) asteners with a bulbed tail providing

consistent high clamp and shear. Can be used to assemble

many materials including metal, plastic and aluminium alloy.

Assembly applications

Automotive

Electronic components

Sheet metal

Electrical engineering

Domestic appliances

Furniture

General light abrication

Oce urnitureDomestic heating systemsVacuum pump or diesel engines

Automotive plastic connector to

moulded chassis Automotive stereo speakerComputer cabinet

Key eatures and benets

Bulbed tail and oreshortening o the astener during

installation ensures high clamp

Bulbed tail and large headorm provide a large

bearing area or sot materials

Tapered tail or ease o hole entry

Expands radially during installation to ensure

maximum hole ll

Lower in-place costs than welding or nail rivets

Bright tin plated brass option or ease o soldering

and good electrical conductivity

Stainless steel option or applications subject to

high temperature or corrosion

Can be bowl ed or larger volume applications using

automated equipment

1. . .



10/24

10


Specications

Sizes:

.4 mm to 6.4 mm

(/ to 1/4)

Materials:

Aluminium alloy,

steel and brass

Headorms:Dome, countersunk

ChobertFor Sot and Brittle MaterialsSpeed (repetition) asteners which provide consistent

controlled clamp, ideal or sot or brittle materials.



Internally tapered bore ensures consistent light clamp

to reduce potential damage to materials

Expands radially during installation to ensure

maximum hole ll

Lower in-place costs than welding or nail rivets

Ideal pivot pin or hose tail

Bright tin plated brass option or ease o soldering


Can be bowl ed or larger volume applications

using automated equipment

1. . .

Composite material latch or

wheel cover

Window hinge Alloy tube with nylon bush

Cooler

Computer rack glass door hinge

Housing or car alarm

Automotive

Electronic components

Sheet metal

Electrical engineering

Injection moulded

components

Switchgear

Domestic appliances

General sheet metal

General light abrication



11/24

11


Specications

Sizes:

.4 mm to 4.8 mm

(/ to /16)

Materials:

Zinc plated steel and

aluminium alloy

Headorms:

Dome

GrovitFor Blind Hole ApplicationsDesigned or blind hole applications in wood, plastics, bre-

glass and aluminium. Can also be used in harder substrates.



Annular grooves on the body expand radially

during installation

Provide a vibration resistant joint and increased

pull-out resistance

1. . .

PVC connector block in air

conditioning unit

Grovit astener in timber

Grovit astener used as a quick

connect low pressure bleed hose PVC strip connector


Trouser press Automotive

Domestic appliances

Electrical equipment

Injection moulded

components

Trouser press (detail)


12/24

1


Specications

Sizes:

.8 mm to 4.0 mm

Materials:

Zinc plated steel

Headorms:Dome

RivscrewThreaded, Removable Fasteners



Expands radially during installation to orm a thread in

host material, eliminating the risk o over torquing and

strip-out

Placed using a hexagon mandrel which expands the

threaded diameter radially, adjacent to its six corners

Removable or servicing with a hex key and reusable

Providing a higher vibration resistant thread lock in

the parent material compared to standard screws

Can be used to asten most materials up to Vickers

hardness 105 Hv5

Eliminates the need or costly tapping or thread-orming

operations

Bright tin plated steel option or ease o soldering


Can be bowl ed or larger volume applications using

automated equipment

Aluminium die-cast boxes

Cast magnesium

Semi-conductors to

thin wall and extruded

heatsinks

Semi-conductors to PCBs

PCBs to chassis

assemblies

Fastening into injection

moulded plastic bosses

General engineeringinvolving plastics, nylon,

polycarbonate etc.

1. . .


Semi-conductors to heatsinks and

printed circuit boards

Alternator diode plate to nylon

moulding

Rivscrew is removable and

reusable

Automotive die-cast chassis

with PCB Heatsinks to processor cartridges

Seat belt tensioner

Threaded, removable speed (repetition) asteners that

combine the speed o rivet placement with the removability

o a screw.


13/24

1


RivscrewPLFor Plastics


Especially designed or sot and hard plastics

Special thread design or a wide range o plastics

with a fexural modulus between 40,000 and

1,400,000 p.s.i (,000 to 10,000 N/mm)

Wide grip range rom .0 to 11.8 mm covered by

one astener

Threaded, removable speed (repetition) asteners that

combine the speed o rivet placement with the removability

o a screw.


Bumper covers

Lighting

Plastic trim

Printers

Domestic appliances

Toys

Plastic enclosures

Specications

Sizes:

.0 mm to 4.5 mm

Materials:

Zinc plated steel

Headorms:Dome

1. .


Rivscrew PL asteners have the same eatures and benets as the standard Rivscrew astener plus:

.


14/24

14


Surace mounted connectors to PCBs DIN 4161 male edge connector

Automotive vertical mounted

connectors

Trac light refector and contact

point

Specications

Sizes:

.5 mm and .8 mm

Materials:

Electro tin plated brass

and aluminium alloy

Headorms:

Dome

AvtronicFor Attaching Connectors to PCBsInitially designed to attach DIN 4161 connectors to PCBs but

can also be used to attach a wide range o other connectors

and components.



Annular grooves on the body expand radially during

installation

Provide a vibration resistant joint, increased pull-out

resistance and good residual clamp

Various body lengths provide a wide grip range to

accommodate most combinations o connector and

PC board thickness

Ideal tack rivet

Can be used in blind hole applications

1. . .

DIN and other connectors

Heatsinks

Card ejectors

Brackets and stiener bars



15/24

15

Please visit our website ww w.avdel-global.com or astener placing animations.

Specications

Sizes:

M.5 x 0.45 and

M x 0.5 threads

Materials:

Tin plated brass

AvsertThreaded Stand-o Pillars or PCBsThreaded stand-o pillars or PCBs in a range o metric

internal threads and many stand-o heights.



Internally threaded bore takes a threaded part e.g.

D-subminiature connectors

Available in many stand-o heights to accommodate

a wide variety o components

Can be used or board thicknesses o 0.8 .0 mm (short

spigot) or 0.8 .4 mm max (long spigot).

Suitable as a emale mating bush or D-subminiature

connectors

1. . .


Aluminium geartrays

and extrusions

D-connectors

PCBs

Telecommunications

equipment

DB5 subminiature connector

4.40 UNC emale


16/24

16


Specications

Sizes:

1.6 mm to . mm

(1/16 1/8)

Materials:

Electro tin plated brass

Headorms:

Dome

AvlugSolderable Terminal PostsSecure, easy-to-solder terminal posts or PCBs.



Rolled/knurled shank ensures secure placement in the

PCB

Suitable or wire wrapping or a test point or CRO tubes

Available with diameters as small as 1.6 mm or assembly

1. . .


Terminal post - wire wrap Terminal posts

Wire wrap


17/24

17

Handtools

Installation SystemsFrom cost-eective handtools to bespoke assembly systems, Speed Fastening equipment oers rapid and reliable

assembly to meet your specic requirements. The equipment is an integral part o the Speed Fastening System and

oers the ollowing benets:

High speed, reliable astener eed

Assembly cycle times within two seconds

Single side assembly

Simple operation

One tool covers the entire range o speed asteners

Quick reload

Low maintenance costs

Ideal or low volume batch work through

to ully automated assembly lines

75 Standard tool

Workstations

Bespoke systems

Rivmatic workstation

placing heads to assemble a

computer chassisTwin head xed pitch workstation

755 Pantograph workstation

757 Handtool

Handtools

For low volume production

up to 50,000 astener p.a.

WorkstationsFor medium volume

production rom 50,000 up

to 1,000,000 astener p.a.


For high volume

production > 1,000,000

astener p.a.


18/24

18

75 Standard tool Suspended Autoload MK 4

Handtools

High perormance, hydro-pneumatic handtool in heavy duty plastic, designed or rapid, blind side installation o speed

asteners. The intensier is separated rom the handtool. One tool places the entire range o speed asteners.

Average cycle time o less than seconds to increase

productivity up to 1500 asteners per hour

High capacity, magazine ed asteners reduces

component handling and subsequent spillage

Robust & durable construction makes it suitable

or most industrial environments

Lightweight construction (split handtool and intensier)

and zero actuation recoil reduces operator atigue

Available with in-line handle and top or bottom hose

conguration

Low maintenance handtool maximises productive time

no requirement or specialist maintenance training

Long lie, sel priming intensier provides consistent

actuation and hence joint ormation

Long reach barrel or use in many dicult access

applications

A suspended version is available that can be supported on a balancer to be quickly and easily moved or discarded redu-

cing downtime and operator atigue.

The Autoload option provides bowl ed asteners to minimise reloading downtime and maximise productivity. The asteners

are automatically loaded onto the mandrel. When asteners on one mandrel are spent, the tool is placed in the nest, and the

system inserts a ully-loaded replacement into the modied 75 tool. The system eatures an operator interace board that

displays real-time reports on machine cycles and ault diagnostics. The data also can be linked to a network allowing o-site

monitoring and maintenance.

750 Handtool


19/24

19

771

Lightweight, hydro-pneumatic handtool with integrated intensier places the whole range o speed asteners.

Average cycle time o approx. 1 second increases

productivity

No need or long umbilical makes it fexible to use

in dierent production environment

Specially toughened plastic body and heavy duty rubber

base increase the impact resistance and durability

Can place the same range o asteners and uses

the same nose equipment as 750 handtool

Ease o maintenance due to integral cycle counter

757 Handtool

Lightweight, hydro-pneumatic handtool with seperated intensier places the whole range o speed asteners,

including the 1.6 mm Avlug speed astener.

Control box and air cursor or reliable use o

small diameter asteners

Uses hydraulics or placing asteners

(reduced shock loads)

Uses same placing equipment and common

parts o the 750 tool

756 Handtool

High perormance, pneumatic handtool in heavy duty plastic, designed or rapid, blind side installation

o speed asteners.

Average cycle time o less than seconds to increase

productivity up to 1500 asteners per hour

High capacity, magazine ed asteners reduces

component handling and subsequent spillage

Robust & durable construction makes it suitable

or most industrial environments

771 Handtool

757 756


20/24

0

70510 Underbench workstation

Workstations Single-headThese single-head workstations can place the entire range o Avdel Speed Fastening Systems and stand out or their

ergonomic design. Rapid assembly makes them cost-eective, even with small batch sizes. Simple to operate, high mobility

and easy integration into the production process are the main eatures. Time-consuming training o an operator is not

necessary. The hydraulic riveting units provide a smooth and shock-ree riveting, ideal or sensitive components. All tools

only require compressed-air supply.

Tool supported on an extendable arm

Wide arm reach to over 0.8 m

Single hand operation

The arm can be moved around the worktop to make

space or other tasks

Long-lie intensier can be bench or foor mounted

Pantograph Workstation

Tool supported on a xed arm

Foot pedal control, leaving both hands ree to

position the workpiece

Easy alignment o workpiece

Height adjustable arm to meet the operators precise

ergonomic needs

Fixed Arm Workstation

Cost-eective workstation, requiring minimum space Mounted below the worktop leaving a ree worksurace

Foot pedal control, leaving both hands ree to position

the workpiece

Easy alignment and precision assembly o smallcomponents

Integral saety guard

Underbench Workstation

755 Fixed arm workstation

Rivmatic workstation

755 Pantograph workstation70510 Underbench workstation


21/24

1

Workstations Multi-head

The Avdel Mini-MAS is a twin-head assembly station or ast, parallel assembly with compact and ergonomic design

making it very easy to integrate into existing assembly lines.

Double-head parallel riveting optimizes your assembly

and increases the quality o the joining

The rivets are presented in pairs and provide practical

jig points or your components.

Possible linear positioning o one riveting module provides

progressive adjustment o the riveting pitch rom 9 mm

up to 10 mm (close pitch version 17 mm 108 mm)

Suitable or many applications

Hydraulic riveting modules provide smooth and

shock-ree riveting

Activation by a oot pedal, leaving the hands ree

or component handling

Seated workstation (stand version optional available)

ESD construction as an option

Mini-MAS

Mini-MAS

Multi-head assembly workstations are designed or the synchronous placement o multiple asteners. Systems can be

simple xed, two head workstations or complex systems where as many as 60 asteners can be placed at the same time.

Most multi headed systems are customised to some extent which means that the user can enjoy the benets o an

assembly solution designed to their own specic requirements.

Synchronous astener placement maximises productivity

and throughput

In built xturing reduces assembly time

Modular assembly technology reduces maintenance costs

Diagnostics capability improves quality control; preventive

maintenance regimes can be implemented

These workstations can be readily integrated into existing

production acilities

Multi-head Assembly Workstations

Close pitch versionStandard nose equipment


22/24

MIRS System to assemble vacuum pump PMP System

9 placing heads to assemble computer chassis 10 placing heads to assemble automotive sealing strips


Automated assembly systems are designed or integration within production lines and oer a complete operator

ree assembly solution or highest levels o productivity.

Bowl ed asteners or continuous astening

In line integration

Diagnostic capability through operator interace

Modular design with simple equipment access or simple

maintenance processes

Automated Assembly Systems


23/24

The Range o Avdel Blind Fastening Systems

Speed Fastening Systems

Extra ast and reliable astening rom one side. Because

rivets are ed automatically.

Breakstem Systems

Blind astening systems with various eatures. From

multi-grip rivet up to high strength stainless steel rivet.

Lockbolt Systems

For joints with highest impact. High clamp orce andvibration resistance.

Blind Threaded Inserts

Fast system or sustainable threads with high

torque-to-turn.

Installation Equipment

From manually operated handtools to customized assembly

workstations.


24/24

AUSTRALIA

Acument Austral ia Pty Ltd.

891 Wellington Road

Rowville

Victoria 178

Tel: +61 9765 6400

Fax: +61 9765 6445

E-mail: [email protected]

CANADA

Avdel Canada, a Division of

Acument Canada Limited

87 Disco Road

Rexdale

Ontario M9W 1M

Tel: +1 416 679 06

Fax: +1 416 679 0678

E-mail: inoAvdel-Canada@

acument.com

CHINA

Acument China Ltd.

RM 1708, 17/F., Nanyang Plaza,

57 Hung To Rd., Kwun Tong

Hong Kong

Tel: +85 950 061

Fax: +85 950 00


FRANCE

Avdel France S.A.S.

bis, rue des Ardennes

BP4

7591 Paris Cedex 19

Tel: + (0) 1 4040 8000

Fax: + (0) 1 408 450


GERMANY

Avdel Deutschland GmbH

Klusriede 4

0851 Langenhagen

Tel: +49 (0) 511 788 0

Fax: +49 (0) 511 788 1

E-mail: AvdelDeutschland@

acument.com

ITALY

Avdel Italia S.r.l.

Viale Lombardia 51/5

0047 Brugherio (MI)

Tel: +9 09 89911

Fax: +9 09 87079


JAPAN

Acument Japan Kabushiki Kaisha

Center Minami SKY,

-1 Chigasaki-Chuo, Tsuzuki-ku,

Yokohama-city, Kanagawa Preecture

Japan 4-00

Tel: +81 45 947 100

Fax: +81 45 947 105


SINGAPORE

Acument Asia Pacic (P te) Ltd.

#05-0/06 Techlink

1 Kaki Bukit Road

Singapore, 417818

Tel: +65 6840 741

Fax: +65 6840 7409

E-mail: T [email protected]

SOUTH KOREA

Acument Korea Ltd.

1-4, Suyang-Ri,

Silchon-Eup, Kwangju-City,

Kyunggi-Do, Korea, 464-874

Tel: +8 1 798 640

Fax: +8 1 798 64


SPAIN

Avdel Spain S.A.

C/ Puerto de la Morcuera, 14

Poligono Industrial Prado Overa

Ctra. de Toledo, km 7,8

8919 Legans (Madrid)

Tel: +4 (0) 91 416767

Fax: +4 (0) 91 416740


UNITED KINGDOM

Avdel UK Limited

Pacic House

Switelds

Watchmead Industrial Estate

Welwyn Garden City

Hertordshire

AL7 1LY

Tel: +44 (0) 1707 9000

Fax: +44 (0) 1707 9199


USA

Avdel USA LLC

614 NC Highway 00 South

Staneld, North Carolina 816

Tel: +1 704 888-7100

Fax: +1 704 888-058

E-mail: inoAvdel-USA@

acument.com

Your local dist ributor for Avdel Speed Fastening Systems is:

AvdelSpeed FasteningSystems

007AcumentIntellectualProperties

,LLC.

6.007

www.avdel-global.com

Avdel, Avlug, Avsert, Avtronic, Briv, Chobert, Grovit, Rivmatic, and Rivscrew are trademarks o Avdel UK Limited.

Speed Fastening is a trademark o Acument Intellectual Properties, LLC.

Documents

Avdel SpeedFastening En