P r o d u c t S p e c i f i c a t i o n B o o k R e v : 9 . 1 0
. 1 Log on to www.magso lv ics.com for product updates
MAG pursues a policy of continuous development. Specifications
in this document are as of December 2012, which may therefore be
changed without notice.
Page No. 1
P r o d u c t S p e c i f i c a t i o n
AutoAutoAutoAutoWinderWinderWinderWinder XTXTXTXT
Generic Name : Yarn Appearance Board Winder Up to 12 inch
Product # : MAG Y0821 Test Category : Yarn
Industry Usage : Spinning, Weaving & Knitting
TEXTI LETEXTI LETEXTI LETEXTI LE T E S T I N G T E S T I N G T E
S T I N G T E S T I N G
S O L U T I O N SS O L U T I O N SS O L U T I O N SS O L U T I O
N S
Features :
Ergonomically designed table top model having rugged steel body
construction.
Motorized and precision-engineered mechanism for smooth and
accurate
operation. Choices of wide range of rectangular and
tapered winding black boards. Operating under stepped pulley
mechanism with traversing motion ensures uniform winding in
different pitch as per standards.
Automatic wrapping in left directions with pre-settable stopper
eliminates manual disturbances.
Variable winding speed option for fine to
course count of yarn. Yarn wrapped on the board can be 20,
22,26,32,38 & 48 ends per inch.
Specially designed yarn bobbin stand for
precise sampling. Model available upto accommodate 30 inches
board also.
T E CHN I C A L D A T A
Measuring range : 1s to 135s Count (NeC)
Tapered board size : 305 x 280 x 178 mm (or) 12 x 11 x 7
inch
Rectangular board size : 280 x 178 mm (or) 11 x 7 inch
Standard Yarn Spacing : 20, 22, 26, 32, 38 & 48 ends per
inch (or) 8, 9, 10, 13, 15 & 19 Per Cm
Power supply : Single phase 220vAC @ 50Hz
Consumption : 50 watts
Applicable Standard(s) : ASTM D2255 and IS 13260
Physical Dimensions : Size(WDH) : 740 x 335 x 400 mm
Weight : 30 kg
S COP E O F S U P P L Y
1) Main Unit 1 No. 2) Accessories : Yarn bobbin stand 1 No.,
Transmission Belt 1 No., Mains cord 1 No., Rectangular board 5 No.
and Tapered board 5 Nos. 3) Spares : Glass fuse (3 A) 3 Nos. &
Ceramic trap guide - 6 Nos.
4) Documents : Users guide, Warranty certificate, Test
certificate & Calibration certificate. Optional Supply : ASTM
Standard Boards (ASTM Cotton yarn appearance standards)
PR E - R E QU I S I T E S F O R I N S T A L L A T ION
Suitable working table, Properly earthed and Stabilized single
phase 220vAC @ 50Hz ported at 5 Amps supply
socket, Test samples and Suitably qualified operator.
OTH ER A VA I L A B L E MOD E L S
AutoWinder DXT and AutoWinder LXT
