Upload
caroline-maitland
View
243
Download
1
Tags:
Embed Size (px)
DESCRIPTION
Automotive cable
Citation preview
PVC SINGLE CORE AUTO CABLE COLOURSIf the colour you require is not listed, contact the sales department for the minimum order quantity and lead-time.160014/0.30mm(1.0mm2)BlackGreenPinkLight GreenBrownOrangePurpleRedGreyBlueWhiteYellow
160328/0.30mm(2.0mm2)BlackGreenBrownPurpleRedBlueWhiteYellow
160544/0.30mm(3.0mm2)BlackGreenBrownRedBlue
160665/0.30mm(4.5mm2)BlackBrownRed
1607120/0.30mm(8.5mm2)BlackRed
160884/0.30mm(6.0mm2)BlackRed
160997/0.30mm(7.0mm2)BlackRed
161180/0.40mm(10.0mm2)BlackRed
FOR CUTTERS & STRIPPERSSEE OUR TOOLS SECTION
Automotive cable
PVC SINGLE CORE AUTO CABLESGeneral purpose low voltage wiring cables suitable for use in the automotive, marine and allied industries.Resistant to petrol, diesel, lubricating oils and diluted acids. Suitable for use at temperatures up to 70°C.
Manufactured in accordance with BS6862 part 1 1971 where applicable. Plain copper conductors toBS6360 – PVC insulated.
Specification
. Manufactured in accordance with ISO6722 : 2006 (Class B).
. Suitable for 12v and 24v systems (Maximum voltage 60v.) - excluding High Tension Circuits.
. Plain Copper Conductors - PVC Insulated.
. Suitable for use at temperatures from -40oC to +105oC with excursions up to +120oC.
. Reduced insulation gives considerable savings in weight and volume especially when used in large wiring harnesses. . Good resistance to petrol, diesel, lubricating oils and diluted acids.. Good resistance to moisture.. Hard grade PVC insulation offers good resistance to abrasion and cut through.. Technical data sheet available on request.
THIN WALL SINGLE CORE AUTO CABLESHigh temperature thin wall low voltage wiring cables suitable for use in the automotive,
marine and allied industries. These cables are specified as standard by manufacturers throughoutEurope due to their high performance characteristics.
3
CORE
4
CORE
5
CORE
7
CORE
ALSO AVAILABLE
13
CORE
10
CORE
PVC FLEXIBLE BATTERY AND STARTER CABLESSingle insulated battery / starter cables.
Resistant to petrol, lubricating oils and diluted acids.Plain copper conductors - PVC insulated -15oC to +70oC.
PVC BATTERY / WELDING CABLESSingle insulated extra flexible welding/battery cables designed for use in tough working environments.
Resistant to petrol, lubricating oils and diluted acids.Plain copper conductors - PVC insulated -30oC to +70oC.
STEREO SPEAKER TWIN CABLES
Twin flat figure of 8 cables suitable for wiring speaker systems in vehicles and in the home.Plain copper conductors - PVC insulated.
ALSO AVAILABLE
TRACER CABLE (CALL FOR COLOURS) DOUBLE INSULATED BATTERY CABLE TINNED COPPER EARTHING BRAIDS PVC IGNITION CABLES (HIGH TENSION) 2/3 CORE MAINS CABLE
Thinwall cable x-ref
CABLE FIXING & MARKING
Cable TiesSpecification
High quality virgin nylon 6.6
Flame resistant to ul94v2Tensile strength in accordance with mil 23190eFor continuous use -40oc to +85oc
PART NO LENGTH WIDTH MAX BUNDLE MAX TENSILE (MM) (MM) DIAMETER (MM) STRENGTH (KG)HFC100 100 2.5 18 8
HFC120 120 2.5 24 22
HFC140 140 3.6 33 18
HFC200 200 4.8 50 22
HFC300 300 4.8 76 22
HFC300H 300 7.6 76 55
HFC300SIL 300 4.8 76 22
HFC365 370 4.8 102 22
HFC370 370 7.6 102 22
HFC530 530 4.8 140 22
HFC580 580 12.7 152 113
All cable ties come in packs of 100 - Various colours available on request
Stainless steel cable tiesMAX DIAMETER MINIMUM TENSILE STGTH.
SST2316 - 201x4.6MM 50MM 445NSST4316 - 360x4.6MM 100MM 445NSST4316H - 360x7.6MM 100MM 1112N
Supplied in packs of 100
� Self locking design� Smooth internal surface suitable for all types of cable insulation� Del norske veritas type approval number e-66729� ul listed file number e227552
Steel cable ties
cable FIXING
Adhesive backed nylon cable tie base4 Side entryRecommended temp -20OC + 60OCScrew mounting hole (ON HFC2/4)HFC1/4 - 20MM2 (MAX TIE WIDTH 4.0MM)HFC 2/4 - 28MM2 (MAX TIE WIDTH 5.0MM)
Supplied in packs of 100
Aluminium cable mounting clips
Self adhesive base.suitable for fixing round or flat cables, conduit, etc
PART NO. MAX CABLE DIAM. SIZE (MM)SC1.50 6.0 MM 16 X 6SC2.50 9.5 MM 20 X 15
Nylon cable mounting clipsSelf adhesive base.suitable for fixing round or flat cables, conduit, etc
PART NO . MAX CABLE DIAM SIZE (MM)MCA1N.50 3.8 MM 16 X 16MCA2N.50 7.7 MM 26 X 26MCA3N.50 12.0 MM 32 X 32
Coloured cable ties - RAIN160
50 x Red50 x Green50 x Yellow50 x Blue50 x OrangeTotal 250 ties - 160MM x 2.5MM
Cable tie cradle
Suitable for the larger ties. the cradle is fixed to a firm surfaceusing a self tapping screw.
PART NO. MAX TIE SIZE SIZE (MM)CTC1B.50 7.8 MM 23 X 16
Supplied in packs of 50
Supplied in packs of 50
Supplied in packs of 50
TT20 Tensioning toolDesigned for cable tiesFrom 2.2mm – 4.8mm wide.
This tool automatically cuts the excessOff the cable tie once the correct tension isAchieved.
cable MARKING
Black rubber-covered aluminiumP clips for fixing cables, conduit, etc.Rubber covered to provide protectionagainst vibration and chafing.
Nylon P clipsFor fixing cables, conduit, etc.
· available in black (b)� See chart for pack sizes
Chevron cut wire markers (Colour coded)Easy application
p clips
PART HEIGHT (H) WIDTH (W) TEXT HEIGHT
PA1 5.5MM 4.2MM 2.6MM
Numbers 0-9 available - other characters on request
1000 markers per reel
Specification material: Cadmium-free soft pvc to special formula.
Print: Hot-foil stamped.
Temperature: The shape is permanent between -30°c and +70°c.
Properties: Self-extinguishing, good resistance to chemicals, gamma and uv radiation.
Standard legends: 0-9 ex stock, (a-z, +, -, /, earth, or blank. special symbols available to order).
Product overview· Closed, secure, marker sleeve for unconnected wires and cables.· Designed for electrical, pneumatic, hydraulic etc. applications.· High quality hot-foil marking.· Unique profile with spring-action bellows covers a wide variety of diameters with a single
marker size therefore reducing marker stock requirements.· Designed to interlock when fitted, enabling easy alignment of multiple character markings.· High environmental tolerance and excellent legibility.� Confirms to IEC 60062 Colour referencing marking system.
cable MARKING
Colour Number
PART NO. PART NO. NOMINAL INSIDE OUTSIDE ROLLSPLIT UNSPLIT WIDTH DIA MM DIA MM SIZE1213007 1212079 8 6.7 10 50M1213008 1212850 8.5 8.5 11.5 50M1213010 1212109 10 10.1 13.2 50M1213014 1212141 12 14.5 18.5 50M1213017 1212176 20 17 21.2 50M1213022 1212222 25 21.6 25.6 50M1213023 1212230 28 23.5 28.5 50M1213026 1212260 30 26.1 31.2 25M1213029 1212290 32 29.4 34.5 25M1213037 1212970 40 36.7 42.2 25M1213050 1212508 50 48.1 54 25M
For use with unsplit tubing
ABK10-M16 FITS NW10 TubingABK13-M16 FITS NW13 TubingABK17-M20 FITS NW17 TubingABK22-M25 FITS NW22 TubingABK29-M32 FITS NW29 Tubing
Connection glands - For feeding convoluted tubingthrough bulkheads, junction boxes etc.
Reducing kits also available,
These allow reducing of outlet to accept smaller diameter conduit while keeping an IP67 seal
Conduit & accessories
� Material - nylon 6� Continuous operating temperature -40ºc - +120ºc with short excursions up to +155ºc� Resistant to petrol oil & water
Nylon convoluted sleevingNylon convoluted sleevingsuitable for bundling of wiresand protection against abrasion.
External Hinged T Pieces PART NO. CONDUIT OUTLET SIZE A B C9608138 10 10 109608115 13 13 139608101 13 10 139608107 17 10 139608136 17 10 179608143 22 10 109608121 22 10 229608108 22 13 229608103 22 17 13Reducing kits & Y pieces also available,
These allow reducing of outlet to accept smaller diameter conduit while keeping an IP67 seal
HEATSHRINK
Standard heat shrink
Adhesive lined heat shrink
2:1 Ratio in mini boxes
Available in black & red.
Shrink temperature is90 degrees C
PART PRE-SHRINK SHRUNK PK QTYNO. DIAM. MM DIAM. MM METRESHSMB12 1.2 0.6 20HSMB16 1.6 0.8 17HSMB24 2.4 1.2 15HSMB34 3.4 1.6 15HSMB48 4.8 2.4 12HSMB64 6.4 3.2 12HSMB95 9.5 4.7 8HSMB127 12.7 6.4 8HSMB191 19.1 9.5 5HSMB254 25.4 12.7 5
PART PRE-SHRINK SHRUNK PK QTYNO. DIAM. MM DIAM. MM METRESHSDW 3-3 3 1 1.2HSDW 3-4.8 4.8 1.6 1.2HSDW 3-6 6 2 1.2HSDW 3-9 9 3 1.2HSDW 3-12 12 4 1.2HSDW 3-18 18 6 1.2HSDW 3-24 24 8 1.2HSDW 3-39 39 13 1.2
3:1 Ratio
Available in black only
Shrink temperature is90 degrees C
Spiral wrapSpiral binding provides a neat and quick method of
protecting harnesses & wiring looms against abrasion.
once fitted it can be constantly adjusted or reused.
SB2B.25 - 6.4MM DIAM. 25M
SB3B.25 - 12.7MM DIAM. 25M
spiral wrap