automatic_entrance_systems

Automatic Entrance Systems

Sliding doors

Swing door drives Revolving doors

Security doors All glass systems

2

Sliding doors

Sliding door compactMaster CM / CM-F . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 – 4

Sliding door compactMaster Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Sliding door econoMaster EM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 – 7

Sliding door econoMaster Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Sliding door heavyMaster HM / HM-F . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 – 10

Sliding door heavyMaster Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Telescopic sliding door compactMaster CMT / CMT-F. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 – 13

Curved sliding door compactMaster CMR / CMR-F . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 – 15

Prismatic sliding door compactMaster CMW / CMW-F . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 – 17

Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 – 19

Swing door drives

Swing door drive turnMaster . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 – 21

Swing door drive swingMaster DTU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 – 23

Revolving doors

Standard revolving door GRA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 – 25

All glass revolving door GGG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 – 27

Large-capacity revolving door GGR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 – 29

Security doors, access control doors

Security revolving door GSI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 – 31

Security curved sliding door GSI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 – 31

All glass systems

All glass sliding partition, manual, shopMaster GSW-M . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 – 33

All glass sliding partition, automatic, shopMaster GSW-A . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 – 35

Contents

3

Sliding doors

compactMaster CM and CM-F

The drive system compactMaster meets all requirements on comfortable operation and design.

With a vertical dimension of 100 mm, the drive unit easily fi ts into the architecture of the building.

The use of large rollers and a rubber cushion under the running rail provide for an outstan-digly smooth and quiet running.

Its compact and slim design beautifully har-monizes with sophisticated modern glass façades.

Due to intelligent control engineering, the drive system compactMaster offers maxi-mum safety.

The modular construction of the drive provi-des quick assembly and easy maintenance.

The potential connection of the automatic door to building management systems via an optional interface is standard.

GU Automatic sliding doors are used in:

Airports

Shopping centres

Banks

Public buildings

Hospitals

Homes for the elderly

Homes for the disabled

Safety zones

Any smart entrance solution

* (TÜV = German Technical Supervisory Association)

The compactMaster drive system is tested and suitable for the use with escape and res-cue routes (type CM-F).

The accordance to DIN 18650 was certifi ed by TÜV*.

DIN 18650

4

compactMaster CM and CM-F

Technical data

Type of drive compactMaster CM compactMaster CM-F

1 door leaf 2 door leaves 1 door leaf 2 door leaves

Clearance width [1] 800 – 1250 mm 800 – 2500 mm 800 – 1250 mm 800 – 2500 mm

Clearance height [1] max. 2500 mm

Weight of door leaf max. 100 kg/leaf

Mains voltage 230 V/AC, 50 Hz

Power consumption max. 160 VA (50 VA during operation)

Hold open time 0 – 60 s 0 – 255 s

Hold open time key impulse 0 – 255 s

Opening speed max. 0,7 m/s

Closing speed max. 0,5 m/s

Winter opening width 50 – 100 % of clear opening width [2]

Ambient temperature for dry rooms only; -15 °C up to +50 °C

Protection class IP 20

* Required with CM-F variant only.[1] Standard widths with regard to total dimension of drive system and local situation. Special solutions on request.[2] It is necessary to consider the mandatory escape route width.

cover support

end stop

motor

emergency open battery

carriage

controlunit

lock(optional)

belt connection

mainsadapter

beltpulley

2nd motor *

Drive components

5

compactMaster Kit

Basic kit for single leaf doors

Additional kit for double leaf doors

Article number

Basic kit A-9000850

Additional kit A-9000860

* FFL (= fi nished fl oor level)

Quick and easy on-site assembly and startup (modular design).

High-quality and powerful components guaran- tee the proven quality of compactMaster.

Special aluminium profi les allow for optimum positioning and maintenance of the driven components.

The use of large rollers and a rubber cushion under the running rail provide for an outstan- digly smooth and quiet running.

A slim profi le system providing stylish appearance completes the modular design of this sliding door system.

Its attractive cost-performance ratio makes the compactMaster Kit package a perfect partner in the automatic sliding door segment.

Due to universal applications, the compactMaster Kit package offers many convincing advantages:

Cross section

6

High performance combined with technically mature mechanics – experience the diffe-rence to other “low cost” drives!

The GU Automatic drive system econoMaster – your solution for the cost-effi cient automa-tion of fi ne entrances.


DIN 18650

Sliding doors

econoMaster EM


Airports

Shopping centres

Banks

Public buildings

Hospitals



Safety zones


The drive system econoMaster represents a new generation of cost-effi cient sliding door drives.

The use of large rollers guarantees smooth running and longevity.

Even large doors with weights up to 80 kg per door leaf open quietly and fast.

The small height of the drive (130 mm) to-gether with a slim frame profi le provide both a stylish appearance and functionality to any entrance.

The operational parameters can be set accu-rately in a quick and easy way.

Due to its running smoothness and speed as well as its simple assembly, the econoMaster is an interesting product for both manufac-turer and user.


7

econoMaster EM

cover support

end stopmotor

emergency openbattery

carriage

controlunit

lock(optional)

beltconnection

mainsadapter

belt

pulley

Drive components

Technical data

Type of drive econoMaster EM

1 door leaf 2 door leaves

Clearance width [1] 800 – 1250 mm 800 – 2500 mm





Hold open time 0 – 60 s



Winter opening width 50 – 100 % of clear opening width



[1] Standard widths with regard to total dimension of drive system and local situation. Special solutions on request.

8

econoMaster Kit

Basic kit for double leaf doors

Article number

Basic kit A-9001110

* FFL (= fi nished fl oor level)

Assembly and startup on site – quick and easy.


The econoMaster is modular by design, all its components are of high quality.

The drive system is of versatile use and provides solutions for almost any entrance.

Due to universal applications, the econoMaster Kit package offers many convincing advantages:

Cross section

9

Sliding doors

heavyMaster HM and HM-F


Airports

Shopping centres

Banks

Public buildings

Hospitals



Safety zones


The drive system heavyMaster is your pro-blem solver when it comes to special requi-rements such as the reliable and noiseless operation of large sliding panels with weights up to 200 kg.

The use of large rollers and a rubber cushion under the running rail provide for an outstan-digly smooth and quiet running.

Sliding panels framed with thermally broken system or steel profi les are ideally suited for assembly with heavyMaster.


The heavyMaster drive system is tested and suitable for the use with escape and rescue routes (type HM-F).


DIN 18650

10

heavyMaster HM and HM-F

Technical data

Type of drive heavyMaster HM heavyMaster HM-F




Weight of door leaf max. 200 kg/leaf max. 160 kg/leaf





Opening speed max. 0,7 m/s (depends on weight)





[1] Standard widths with regard to total dimension of drive system and local situation. Special solutions on request.[2] It is necessary to consider the mandatory escape route width.

cover support

end stopmotor

emergency openbattery

carriage

controlunit

lock(optional)

belt connection

mainsadapter

belt

Drive components

11

heavyMaster Kit

Basic kit 1[1]

for single leaf doorsBasic kit 2[1] for single leaf doors

Article number

Basic kit 1 A-9001740

Basic kit 2 A-9000920

* FFL (= fi nished fl oor level)[1] Single leaf assemblies require both Basic kit 1 (Article no. A-9001740) and Basic kit 2 (Article no. A-9000920).

Additional kit for double leaf doors

Article number

Additional kit A-9001780

Assembly and startup on site – quick and easy.


The heavyMaster is modular by design, all its components are of high quality.

The drive system is of versatile use and provides solutions for almost any entrance.

Due to universal applications, the heavyMaster Kit package offers many convincing advantages:

Cross section

12

GU Automatic telescopic sliding doors are used in:

Airports

Shopping centres

Banks

Public buildings

Hospitals



Safety zones


Telescopic sliding doors

compactMaster CMT and CMT-F

GU Automatic telescopic sliding doors are ideally suited when it comes to provide a wide passage area for maximum passenger fl ow where space is limited.

With slim door panel profi les, the telescopic sliding door system offers a very stylish and attractive appearance to the entrance area.


The option between 2-leaf and 4-leaf variants provides versatile creative solutions to meet individual requirements.


GU Automatic telescopic sliding doors are tested and suitable for the use with escape and rescue routes (type CMT-F).


DIN 18650

13

compactMaster CMT and CMT-F

Types (shown with 4 leaves – also available with 2 leaves)

4 leaves, with fixed side lights 4 leaves, with fixed side lights and fanlights

4 leaves, only door leaves Telescopic 2- or 4-leaf doors provide large passage widths.

Technical data

Type of drive compactMaster CMT compactMaster CMT-F

2 door leaves 4 door leaves 2 door leaves 4 door leaves



Fanlight height max. 800 mm

Weight of door leaf max. 140 kg/pair of leaves











14

Curved sliding doors

compactMaster CMR and CMR-F

GU Automatic curved sliding doors are used in:

Hotels

Administration buildings

Banks

Entrances with sophisticated architecture

The curved sliding door system with slim profi le door leaves provides freedom in aesthetic design – it will be the eye catcher of your stylish entrance area.


Sophisticated design and innovative techno-logy:

With GU Automatic curved sliding doors you make a statement!


GU Automatic curved sliding doors are tested and suitable for the use with escape and res-cue routes (type CMR-F).


DIN 18650

15

compactMaster CMR and CMR-F

Technical data

Type of drive compactMaster CMR compactMaster CMR-F















Options EMCO mat, coir matting

Halogen spot lights to be installed in the aluminium ceiling

Integration in building management and access control systems

Variants

Semicircle

Complete circle 360°

Divided circle

Radii from 1000 – 3000 mm

16

Prismatic sliding doors

compactMaster CMW and CMW-F

GU Automatic prismatic sliding doors are used in:

Hotels

Administration buildings

Banks

Entrances with sophisticated architecture

GU Automatic prismatic sliding doors: an ideal combination of passage convenience and impressive design.

GU Automatic prismatic sliding doors with compactMaster drive system are manufac-tured for any desired angle.

Architects and planners are free to create individual entrances as impressive highlights in accordance with the building construction.

With its slim and attractive design as well as its modern technology, the compactMaster drive system is an interesting product for manufacturers and customers.

The modular construction of the drive allows for a simple and time saving installation.

The intelligent micro-processor is designedfor connection to building management systems and for the precise setting of the re-quired parameters on site.


The compactMaster drive system is tested and suitable for the use with escape and res-cue routes (type CMW-F).


DIN 18650

17

compactMaster CMW and CMW-F

Technical data

Type of drive compactMaster CMW compactMaster CMW-F

2 door leaves 2 door leaves

Clearance width [1] 900 – 2000 mm 900 – 2000 mm


Angle 90° – 179°












Cover Cover

90° – 179°

5050

32,532,5

Clearance width

18

Sliding doors

Accessories – Order information

* (provided by customer)

Function selection switch FWSWhite frame (standard)

fl ush mounted A-8002210

surface mounted A-8002310

Summer/Winter/PharmacyWhite frame (standard)



EMERGENCY-OFFWhite frame (standard)



Combined switchSummer/Winter/Pharmacy

Function selectionWhite frame (standard)



Combined switchEMERGENCY-OFF

Function selectionWhite frame (standard)



Combined switchSummer/Winter/Pharmacy

Function selectionEMERGENCY-OFF

White frame (standard)



Function selection switch PO6for half cylinder 27 mm*



Programme selector switch DPSWhite frame (standard)



Light barrier

A-7130810

Light barrier control unit

A-7130820

19

Sliding doors

Accessories – Order information

* (provided by customer)

Radar Eagle ONEwith direction sensor

A-7023370

Radar Eagle THREE Nself-monitoring

for the use with escape route doors

A-7117420

Weather shield Eagle

A-7023630

Radar / Presence sensorActiv 8 ONE ON

A-7125440

Radar / Presence sensorActiv 8 THREE ONself-monitoring

for the use with escape route doors

A-7125450

Weather shield Activ 8

A-7133410

Touchless switch“Magic Switch”

A-7032820

“Elbow switch”

A-8001940

“Elbow switch”in stainless steel design

A-8003560

Adhesive label“Push here”

A-7025010

Key switchfor half cylinder 27 mm*

Grey frame (standard)



Rocker switchWhite frame (standard)



Numeric keyboard

A-7109120

Evaluating unit

A-7109130

Mechanic fl oor lock

A-8004110

20

GU Automatic swing door drives are used in:

Projects where barrier-free passage is demanded

Facilities for the disabled

Residences for the elderly

Areas of increased hygienic demands (clinics)

Pharmacies

Surgeries

Food enterprises

Hotels and restaurants

Swing door drives

turnMaster

The microprocessor controlled electrome-chanic swing door drive turnMaster easily adapts to the individual requirements of the particular location.

Its design and stable workmanship allow for reliable functioning and outstanding run-ning smoothness.

Even large and heavy doors can be controlled and moved effortlessly by the user. This pro-vides convenient and safe passage also for elderly or handicapped persons.

With hands free activation, the drive sys-tem is ideally suited to areas with increased hygienic demands, e.g. in hospitals.

The installation of the drive is simple and time-saving. Retrofi tting and modernising existing door systems is easy and effi cient.

The swing door drive turnMaster is available in pull open and push open version.


DIN 18650


21

Technical data

Type of drive turnMaster

Execution push or pull open

Opening electro-mechanic

Closing by spring force

Closing force [1] size 3 – 6 push open, size 3 – 5 pull open

With power failure door closer function

Opening angle 130° push open, 98° pull open

Opening speed adjustable

Hold open time adjustable


Power consumption 200 VA

Weight of door leaf max. 250 kg

Door leaf widths 700 – 1400 mm push open, 700 – 1250 mm pull open



Dimensions (W x H x D) 700 x 104 x 135 mm

Power supply for peripheral accessories

24 V/DC, 1,2 A

Programme selection switch integrated; with LED indication (altern.: external); operating modes: off, automatic, closing time, permanent open

Options push open arm soffi t depths up to 250 mmaxle extension

[1] Sizes to EN 1154.

turnMaster

Product features Low-noise operation

Suitable for exterior and interior doors

Easy assembly, start-up and maintenance

Integrated function selection switch with LED indication

Mechanic release from hold-open position

Adjustable wind pressure function

Dynamic adjustment of hold open time

Connection of motor driven lock, SECURY A-opener, elec-tric door opener and safety sensors possible

Slot for radio receiver card

Rugged case in fashionable G.U-BKS design

Functioning modes Automatic operation

Servo operation

Low-energy operation

135

Sensor Sensor

104

22

Swing door drives

swingMaster DTU

Transparency and concealed mechanics combined with functionality and high quality performance:

The underfl oor drive swingMaster DTU of-fers architects and planners a unique possibi-lity of automating swing door systems.

On the basis of a well proven technology, all demands on a reliable, modern swing door drive are realised.

In modern shop construction it captivates by providing unobtrusive automation.

With this drive system the automation of all glass entrance systems or doors in historical or listed buildings is effi cient and provides comfortable access to all users.

The use of an optional battery allows for a desmoking function.

GU Automatic underfl oor drives for swing doors are used in:

Historical buildings

Shopping centres

Hospitals

Hotels

Modern and transparent entrance areas

23

swingMaster DTU

Technical data

Type of drive swingMaster DTU

Type 1 door leaf DTU-1 2 door leaves DTU-2 [1]

Opening angle 110°


Dimensions

Cement box 340 x 430 x 156 mm

Floor recess 350 x 470 x 156 mm[2]

Weight of door leaf 200 kg/max. door width 1100 mm180 kg/max. door width 1200 mm150 kg/max. door width 1400 mm

Operation modes off, automatic, exit, permanent open

With power failure optional battery for one-time opening

Hold open time adjustable

Opening speed adjustable

Special solutions on request. [1] Available on request. [2] Plus additional space for wiring.

Accessories Stainless steel cover plate, 240 grid

Cement box out of galvanised steel

Options Safety sensors in opening and closing

direction

Connection to building management technology

outside outside

inside

DIN lh opening towards the inside DIN rh opening towards the inside

inside

Dimensions

Installation examples

24

GU Automatic standard revolving doors series GRA are used in:

Hotels and restaurants

Offi ce and administration buildings

Service stations

Banks

Revolving doors

Standard GRA

The standard revolving door series GRA is characterised by a framed turn stile and by drum walls consisting of an aluminium-glass-construction with slim profi les or ther-mally insulated smooth panels.

Due to their variable construction and to many options, GU Automatic revolving doors meet individual demands in dimension and design offering high quality solutions for many building and renovation projects.

In addition to an impressive and individual design, functionality, thermal insulation and noise protection are the features of building entrances realised with GU Automatic revol-ving door systems.


DIN 18650


25

Standard revolving door GRA

* Special dimensions on request. [1] In the case of an automatic drive, the canopy fascia profi le must have a height of 175 mm at the minimum.

D* A* B* C / 3 door leaves C / 4 door leaves E

1800 2100 – 3000 175 – 800 ~ 830 ~ 1220 1860

1900 2100 – 3000 175 – 800 ~ 875 ~ 1290 1960

2000 2100 – 3000 175 – 800 ~ 920 ~ 1350 2060

2100 2100 – 3000 175 – 800 ~ 965 ~ 1420 2160

2200 2100 – 3000 175 – 800 ~ 1010 ~ 1490 2260

2300 2100 – 3000 175 – 800 ~ 1060 ~ 1560 2360

2400 2100 – 3000 175 – 800 ~ 1105 ~ 1620 2460

2500 2100 – 3000 175 – 800 ~ 1150 ~ 1690 2560

2600 2100 – 3000 175 – 800 ~ 1195 ~ 1760 2660

2700 2100 – 3000 175 – 800 ~ 1240 ~ 1820 2760

2800 2100 – 3000 175 – 800 ~ 1285 ~ 1890 2860

2900 2100 – 3000 175 – 800 ~ 1330 ~ 1960 2960

3000 2100 – 3000 175 – 800 ~ 1375 ~ 2030 3060

3100 2100 – 3000 175 – 800 ~ 1420 ~ 2090 3160

3200 2100 – 3000 175 – 800 ~ 1465 ~ 2160 3260

3300 2100 – 3000 175 – 800 ~ 1510 ~ 2230 3360

3400 2100 – 3000 175 – 800 ~ 1555 ~ 2290 3460

3500 2100 – 3000 175 – 800 ~ 1600 ~ 2360 3560

3600 2100 – 3000 175 – 800 ~ 1645 ~ 2430 3660

Turnstile 3 or 4 rigid leaves with 10 mm clear

toughened glass

Folding mechanism for summer position possible (height of canopy 350 mm)

Drum walls Curved 9 mm clear laminated glass

Curved, smooth-surfaced panel (with 30 mm thermal insulation)

Drive [1]

Manual

Manual with automatic positioning

Semi-automatic (push-and-go)

Fully automatic

Night locking Espagnolette locks in the door leaves

Electromechanical locking unit for the turnstile

Manual or automatic night sliding doors running outside

Surfaces RAL fi nish

Silver anodised

Colour anodised

Stainless steel 240 grid satin polished

Bright polished stainless steel

Options Halogen spot lights to be installed

in the aluminium ceiling

Stainless steel fl oor ring (V2A)

Vertical or horizontal handles of stainless steel

EMCO mat, coir matting

Roof outside the building waterproof

Further options on request.

26

GU Automatic all glass revolving doors series GGG are used in:

Hotels


Banks

Revolving doors

All glass GGG

The all glass revolving door series GGG is the highlight of a perfect integration of an entrance system in a glass façade.

Glass roof and optional fl oor drive provide unique creative possibilities for architects ai-ming at maximum transparancy.


Depending on the positioning of the door lea-ves, revolving doors offer effi cient protection against draughts.


DIN 18650

27

All glass revolving door GGG

D* A* B** C / 3 door leaves C / 4 door leaves E

1800 2100 – 3000 16 ~ 830 ~ 1220 1860

1900 2100 – 3000 16 ~ 875 ~ 1290 1960

2000 2100 – 3000 16 ~ 920 ~ 1350 2060

2100 2100 – 3000 16 ~ 965 ~ 1420 2160

2200 2100 – 3000 16 ~ 1010 ~ 1490 2260

2300 2100 – 3000 16 ~ 1060 ~ 1560 2360

2400 2100 – 3000 16 ~ 1105 ~ 1620 2460

2500 2100 – 3000 16 ~ 1150 ~ 1690 2560

2600 2100 – 3000 18 ~ 1195 ~ 1760 2660

2700 2100 – 3000 18 ~ 1240 ~ 1820 2760

2800 2100 – 3000 18 ~ 1285 ~ 1890 2860

2900 2100 – 3000 18 ~ 1330 ~ 1960 2960

3000 2100 – 2600 18 ~ 1375 ~ 2030 3060

* Special dimensions on request. ** or thicker, depending on static requirements. [1] Automatic drives are installed underfl oor.

Turnstile 3 or 4 rigid door leaves of 12 mm clear

toughened glass with slim frames

Drum walls Curved 9 mm clear glass with 40 mm

skirting profi le

Drive [1]

Manual

Manual with automatic positioning

Semi-automatic (push-and-go)

Fully automatic

Night locking Patch locks on door leaves

Manual night sliding doors running outside


Silver anodised

Colour anodised



Options Vertical or horizontal handles

of stainless steel

EMCO mat, coir matting



28

Revolving doors

Large-capacity GGR

GU Automatic large-capacity revolving doors series GGR are used in:

Shopping centres

Airports

Furniture stores

Hospitals

Health and rehabilitation clinics

Hotels

The large-capacity revolving door series GGR is the elegant and energy-saving solu-tion when it comes to managing large quan-tities of people.

This door combines elegant design and high functionality in an ideal way. The passage with shopping trolleys, baby carriages or wheelchairs is possible without any problem.

Whether with or without central display case, night locking or illumination – this revolving door offers a large variety of design options.

As a matter of course, maximum safety is guaranteed by fi xed sensors and sensors moving with the turnstile.

The GGR series is tested and licensed for the use with escape and rescue routes.


DIN 18650


29

Large-capacity revolving door GGR


3600 2100 – 2500 500 – 800 ~ 1690 ~ 2455 3720

4200 2100 – 2500 500 – 800 ~ 1972 ~ 2864 4320

4800 2100 – 2500 500 – 800 ~ 2253 ~ 3274 4920

5400 2100 – 2500 500 – 800 ~ 2535 ~ 3683 5520

6000 2100 – 2500 500 – 800 ~ 2817 ~ 4092 6120

6200 2100 – 2500 500 – 800 ~ 2911 ~ 4228 6320

Turnstile 3 or 4 pivoted door leaves

with 6 mm clear toughened glass



Drive Fully automatic via radar including safe-

guard for primary and secondary closing edges, sensors and contact strips for heel protection, storm lock


Electromechanical locking unit for the turnstile



Silver anodised

Colour anodised






Push button for disabled persons

EMCO mat



* Special dimensions / solutions with showcase on request.

30

GU Automatic security revolving doors and security curved sliding doors are used in:

Banks

Insurance companies

Computer centres

Research centres

Authorities

Ministries

Industrial buildings


Security doors

Security revolving door / Security curved sliding door GSI

Security revolving doors and security cur-ved sliding doors are a safe and comfortable solution for all applications where a high de-gree of security is required, e.g. in computer centres, banks, ministries.

The admission of individual persons is con-trolled via electronic control systems provi-ding smooth passage in both directions.

With a very high proportion of glass, the de-sign of the door offers to the user generous space and comfortable passage.

High security of persons admitted is achieved by the use of suitable profi le systems which come in a large variety and allow for creative design and adaptation to the architecture of the building.

Security revolving door Security curved sliding door

31

D* A* B* C E

1000 2100 – 3000 350 – 800 ~ 500 1060

1300 2100 – 3000 350 – 800 ~ 600 1360

1500 2100 – 3000 350 – 800 ~ 700 1560

Security revolving door / Security curved sliding door GSI


1800 2100 – 3000 350 – 800 ~ 859 ~ 1239 1860

1900 2100 – 3000 350 – 800 ~ 907 ~ 1308 1960

2000 2100 – 3000 350 – 800 ~ 954 ~ 1377 2060

2100 2100 – 3000 350 – 800 ~ 1002 ~ 1446 2160

2200 2100 – 3000 350 – 800 ~ 1050 ~ 1514 2260

Turnstile 3 or 4 rigid leaves with 10 mm

clear toughened glass (revolving door)

2 curved running leaves with 9 mm clear laminated glass (curved sliding door)



Drive Fully automatic with control via access

control systems such as card readers (provided by the customer)



Hook bolt lock in the sliding leaf


Silver anodised

Colour anodised





Vertical or horizontal handles of stainless steel


Further security glazing such as B1


* Special dimensions on request.

Dimensions: Security revolving door GSI

Dimensions: Security curved sliding door GSI

32

All glass systems

shopMaster GSW-M

The GU Automatic all glass system shopMaster GSW-M is used in:

Banks, halls and hotels

Shop in shop areas in shopping centres and exclusive offi ce buildings

Tranining and conference rooms

The all glass sliding partition system shopMaster GSW-M offers the possibility ofindividual solutions for the realisation of parti-tions and shop front designs for shop in shop concepts.

Planners are set no boundaries – there is a solution for almost any fl oor plan.

According to requirements, glass sliding par-titions are available in linear, curved or seg-mented design.

The units can be arranged in a variety of ways, a fl oor guide is not needed. The com-pact design only requires limited space for the running track and parking niche.

Side passage may be provided e.g. by means of side hung sliding swing panels equipped with door closers.

Due to the small height of the running track, installation fl ush with the ceiling is possible almost everywhere.

Based on latest production engineering, the runners are supported in high-quality ball bearings, thus allowing for reliable operation and smooth opening/closing of the panels.

Secure locking is provided by high quality locks and fi ttings. Special fi ttings prevent the clamp profi les from falling in the event of glass breakage.

33

Execution shopMaster GSW-M

Maximum panel height 3500 mm*

Maximum panel width 1250 mm*

Maximum panel weight 150 kg

Available glass thicknesses 10/12 mm

Running track type linear / angled / in segmentscurved from a radius of 6000 mm

Surfaces silver colour E6/EV1 anodisedRAL (powder coating)stainless steel look

Carriage

End cap

End cap

Facefi xed locking bolt(optional, dependingon type of panel)

Extension profi le(optional)

Running track,2-part

Basic profi le

Clamping profi le

Toughened glass 10 / 12 mm

Toughened glass 10 / 12 mm

Closing profi le

Technical data

* Special solutions on request.

shopMaster GSW-M

System design

34

All glass systems

shopMaster GSW-A

The GU Automatic all glass system shopMaster GSW-A is used in:

Banks, halls and hotels

Shop in shop areas in shopping centres and exclusive offi ce buildings

Tranining and conference rooms

The all glass sliding partition system shopMaster GSW-A offers the possibility ofindividual solutions for the realisation of parti-tions and shop front designs for shop in shop concepts.

Various parking niche options provide the planner with many possibilities. The compact construction requires only minimum space for running track and parking niches.

In state-of-the-art technology, the modules are equipped with PVC coated rollers suppor-ted in ball bearings. Thus, reliable operation as well as smooth running of the panels are achieved.

The innovative modular construction allows the control and movement of panels of va-riable design and size. Sliding units may be connected to the modules individually – de-pending on the requirements.

Due to the small height of the running track of 86,5 mm, installation fl ush with the ceiling is possible almost everywhere.

The perfect mobility of the automatic all glass sliding partition shopMaster GSW-A is achie-ved with the combination of automated con-trol via motor and perfect functioning of the mechanics.

The fl oor guide provides additional stabilityand utmost convenience for the user. For safety reasons, it is possible to move the automatic all glass sliding partition manually in case of power failure.

35

shopMaster GSW-A

Operating functions Decelerated movement to end

positions

Manual operation of driven panel possible in case of power failure

Running function can be activated from any position without test run

Obstacle recognition (stop when obstacle is touched)

Maximum opening force 150 N

Manufactured in accordance with BGR 232 (ZH 1/494) and VDE regulations

Easy drive maintenance without having to dismantle the ceiling

Floor guide 20 x 20 mm

Automatic locking

Emergency release via profi le cylinder

Available with fully automatic panel cover

Control unit Multifunctional button switch

“OPEN – CLOSE” (automatic)

Passage opening “OPEN – CLOSE” (1 panel controllable separately)

Execution shopMaster GSW-A

Maximum panel height 3500 mm* Nominal voltage 230 V/AC, 50 Hz

Maximum panel width 1250 mm* Nominal power 230 W

Maximum panel weight 150 kg Operating current 24 V/DC

Maximum number of panels 32 Ambient temperature -15 °C up to +50 °C

Available glass thicknesses 10/12 mm Protection class IP 20

Speed adjustable within 50 – 150 mm/s

Running track type linear / angled / curved from a radius of 6000 mm*

Surfaces silver colour E6/EV1 anodisedRAL (powder coating)

stainless steel matt fi nish**

Technical data

* Special dimensions on request. ** Module covers anodised, simulated stainless steel fi nish.

Type of unitsSliding panel

with drive and current collecting module, each positioned above the top rail profile. Bottom guidance by means of rolling pin in floor track.

Side hung end panel

with automatic closing and opening when the all glass sliding partition is locked or released.

WP00450-04-4-2 01/2010 Printed in Germanywww.g-u.com

GU Automatic GmbHStahlstraße 8D-33378 Rheda-WiedenbrückPhone + 49 (0) 52 42 - 9 24 - 0Fax + 49 (0) 52 42 - 9 24 - 1 00

Gretsch-Unitas GmbHBaubeschlägeJohann-Maus-Str. 3D-71254 DitzingenPhone + 49 (0) 71 56 3 01-0Fax + 49 (0) 71 56 3 01-2 93

Documents

automatic_entrance_systems