Upload
truongliem
View
220
Download
1
Embed Size (px)
Citation preview
Product Selection Guide
Automatic Timing and Controls
Diversified Electronics
TIMERS • COUNTERS • MOTOR PROTECTION • POWER ALERTS
NEW PRODUCT ADDITIONS FROM ATC & DIVERSIFIED ELECTRONICS
SLU- 0201 Universal Phase Monitor
For 3 phase systems. Adjustable voltage, time delay and imbalance percentage.
Auto ranging scales, adjustable re-start and fault delays. Automatic reset.
ARC / ARD Series 8 pin Duplexor
SPM Seal Failure Monitor, Temp Switch & Liquid Level Controls
175 Series Din Mount
425AR Multi-Function Timer & 385AR Multi-Function Timer/Counter
ATC500 and ATC550 PID/TC Controllers
1/16 DIN Analog Panel Mount Timers
Sequence on simultaneous off. ARD has 3 position switch to provide
a lock option into normal duplex action.
Wraps 3 very useful features into 3 modules. SPM AEA is a seal failure and temp
relay. SPM AAA offers expanded adjustment range. The LPC is a conductive level
control.
Includes a DPR175 Phase Monitor, 175MU Multi-Function Timer, 175DU
Five Function Timer, 175MD Multi-Function Timer w/keypad and the 175SO
Single Function On-Delay timer.
Incorporates dual display and 90 to 270 VAC/DC supply voltage.
Dual display, selectable inputs, 85 to 270 VAC/DC supply voltage, soft start,
RS485 communication and field selectable control output.
405AE On-Delay 8 Pin, 405AR On-Delay 8 Pin / 12 time ranges and the
422AR Repeat 8 Pin time selectable. Both 405AR and 422AR also available
in screw terminal housing.
2marshbellofram.com • 800.727.5646 • 304-387-1200
TABLE OF CONTENTS
Phase Voltage Monitors............................................................................3, 4
Current Monitors ..........................................................................................5
Alternating Relays.........................................................................................6
Isolated Switches, Seal Failure Alarm/Temperature Switch..........................7
Power Alerts..................................................................................................8
Industrial Timers..........................................................................9, 10, 11, 12
Industrial Counters......................................................................................13
Model / Series
SLU-100
SLU-0200
SLU-0201
SLU-600 MPA SLA
Protection
Phase Loss, Under
Voltage, Over
Voltage, Phase
Unbalance, Phase
Sequence, Phase
Shift
Phase Loss, Under
Voltage, Over Volt.
Phase Unbalance,
Frequency Shift
Phase Sequence,
Phase Shift, Rapid
Cycling Lockout
Current- Unbalance
Over Volt/Current
Under Volt/Current
Over Temperature
Ground Fault
Phase Loss,
Under Voltage,
Phase Reversal
Nominal Line Voltages 208, 220, 240, 380 208, 220, 240, 380 200-500 VAC 120, 208, 220, 240
Phase to Phase 50/60 Hz 415, 440, 460, 480415, 440, 460, 480,
575, 600Med. Volt. version
380, 415, 440, 460,
480, 575,
Reset Automatic, Manual Automatic, Manual Automatic, Manual Automatic, Manual
Contact Configuration SPDT DPDT DPDT SPDT, DPDT
Contact Rating Resistive 10A @ 240 VAC 10A @ 240 VAC 10A @ 240 VAC 10A, 5A, 3A
Mounting StylePlug In,
Din Rail
Din Rail,
Surface Mount
Din Rail,
Surface Mount
Plug In,
Surface Mount
Approvals UL, CE UL UL UL, CSA
PHASE VOLTAGE MONITORS
3 marshbellofram.com • 800.727.5646 • 304-387-1200
*For Gen App.- See SLU-0200
PBD PBE SLD SLM UOA
Under and Over
Voltage Limit
Phase Sequence
w/ Adj. Release Delay
True RMS Voltage
Band Monitor
Under & Over Voltage
Phase Sequence
Phase Unbalance
Phase Loss, Under
Voltage, Phase
Reversal
Phase Loss, Under
Voltage, Over
Voltage Phase
Unbalance,
Frequency Shift
Phase Sequence,
Microprocessor Based
Single Phase Under
Voltage Monitor
120, 230, 400, 440 120. 208, 220, 240 120. 208, 240, 380 120, 208, 220, 240, 12, 24, 48, 110 VDC
220, 240 VDC
480, 575380, 415, 440, 460, 480,
575440/480
380, 415, 440, 460,
480, 575, 24, 120, 208 240 VAC
Automatic Automatic Automatic Automatic, Manual Automatic
DPDT DPDT SPDT, DPDT DPDT DPDT, SPDT
3A @ 600 VAC 10A @ 240 VAC10A,5A,3A by
model no.3A @ 600 VAC
5A or 10A by model
no.
Surface Mount Surface MountPlug in,
Surface MountSurface Mount
Plug in,
Surface Mount
UL UL UL UL, CSA UL, CSA
4marshbellofram.com • 800.727.5646 • 304-387-1200
CURRENT MONITOR RELAYS
5 marshbellofram.com • 800.727.5646 • 304-387-1200
Model / Series CLB CMB CMG CMU
Protection3 Phase Current
Unbalance and
Over Current
AC go/no go MonitorAC go/no go monitor
" Self Powered "AC Under Current
Control Voltage 120 VAC 24, 120 VAC, 24 VDC –––– 24 or 120 VAC/DC
Adjustable Current
Trip Point1.0 to 5.0, 2.0 to10 1 to 10 amps fixed
20-36 amps fixed
(CMG-0100), 2 amp
fixed (CMG-0101)
.05 to .25, 0.2 to
1.0, 1.0 to 5.0, 2.0
to 10.0, 4.0 to 20.0
Range (amps) 15 amps continuous up to 50 amps400 amp (CMG-0100)
200 amp (CMG-0101)up to 25 amp max
Reset Automatic, Manual Automatic Automatic Automatic
Contact Configuration SPDT SPDT SPST n/o DPDT
Contact Rating Resistive 10A @ 240 VAC 10A @ 240 VAC 5A relay or 1A s-state 10A @ 120 VAC
Mounting Style Surface Mount Plug -in Style D Surface Mt. Plug-in, Surface
6marshbellofram.com • 800.727.5646 • 304-387-1200
Model / SeriesARA, ARB
ARC, ARDARA ARM ARM
Number of Loads
Sequenced
2
(ARB and ARD w/
Special Function)
Duplexor, Triplexor,
Quadraplexor
Integrated Duplex
Controller
Triplex and
Quadplx,
Alternating
Controller
Control Voltage24, 120 VDC
24, 120, 208,
240 VAC
24, 120 VAC 24, 120 VAC 24, 120 VAC
Expandable ––––
Yes with models
ARA-120-AME and
ARA-120-ANE
–––– ––––
Contact Configuration SPDT,DPDT, DPDT
CrosswiredControl Switch (3) SPST n/o SPST n/o
Contact Rating Resistive 10A @ 240 VAC 5A @ 120 VAC 10A @ 120 VAC 5 amps @ 120VAC
Mounting Style Plug-in Surface Mount Surface-Panel Mount Surface Mount
Approvals UL, CSA UL, CSA model AFE UL 913 UL
Application / Notes2 loads Duplexor
SOSO (ARC-ARD)Special Functions
Intrinsically Safe
Inputs
Intrinsically Safe,
SOSO, FOFO
output
ALTERNATING RELAYS
ISOLATED SWITCHES / SEAL FAILURE ALARM
7 marshbellofram.com • 800.727.5646 • 304-387-1200
Model / Series ISOISO, ISL
Latching OutputSPM
ProtectionSingle Channel
Isolated Switch
Multiple Channel 2,3,4
Isolated Switch
Single & Dual Channel
Seal Failure Alarm, Dual
Function - Failure and
Temperature
Control Voltage 24, 120 VAC 24, 120 VAC 120 VAC
Control Switch16 VDC Open Circuit Voltage
200 ua short circuit current
6.2 VDC Open Circuit Volt.
10 ua short circuit current
9 VDC, probe voltage 9
VDC
temperature switch 12 VDC
Contact Configuration SPST n/o SPST n/o DPDT, SPST n/o,SPDT
Contact Rating Resistive 5A @ 120 VAC 5A @ 120 VAC 5A,10A @ 120 VAC
Mounting Style Plug-in, Surface Mount Surface Mount Plug in, Surface Mount
Approvals UL 913 UL 913 UL
Application / Notes Hazardous Location Hazardous Location Submersible Pump
8marshbellofram.com • 800.727.5646 • 304-387-1200
Model / Series UPA BFA GFD
Protection / OperationVisual Power Alert
Arc Flash Risk Reduction
Visual Fuse Status
Indicator
3 Phase Ground
Fault Display
Operational Range
AC Single or Three Phase
40 to 600 VAC 50/60/400 Hz
Line to Line or Line to Ground
DC or Stored Energy
30 to 1000 VDC
Line to Line or Line to Ground
Nominal Voltage
208-600 VAC +/- 10%
Phase to Phase 50/60 Hz
Nominal Voltage
208-600 VAC +/- 10%
Phase to Phase 50/60 Hz
Max. Rated Voltage750 VAC / 1000 VDC
Line to Line or Line to Ground
Maximum Continuous
660 VAC Phase to Phase
Maximm Continuous
660 VAC Phase to Phase
Terminations (4) 8ft, 18 AWG 1000V UL-145 (6) 2ft 18 AWG 600V (4) 2ft 18 AWG 600V
Notes Various models and optionsAll Fuses UL Class
H, J, K, R, RK
Avoid Potential 2nd
Ground Fault
POWER ALERTS
INDUSTRIAL TIMERS
9 marshbellofram.com • 800.727.5646 • 304-387-1200
Model / Series 405AR 405C 407C 409B
Mode of Operation On Delay / Interval On Delay / IntervalOn Delay / Interval
Signal Off Delay
Interval / Push
Button Start
Type Analog Analog Analog Analog
Operating Voltages20-240 VAC &
12-240 VDC
24-240 VAC & 24
VDC
12 VDC only
24 VDC only
24-240 VAC & 24
VDC
24 VDC only
24-240 VAC & 24
VDC
12 VDC only
Time Range .05 Sec to 30 Hrs .05 Sec to 50 Hrs .05 Sec to 50 Hrs .05 Sec to 50 Hrs
Contact Configuration DPDT DPDT, Instantaneous DPDT DPDT
Contact Rating Resistive10A @ 250 VAC/8 pin
5 A @ 230 VAC/Term.10A @ 250 VAC 10A @ 250 VAC 10A @ 250 VAC
Mounting Style1/16 DIN 8 pin or
Screw Terminal1/16 DIN 8 pin 1/16 DIN 11 pin 1/16 DIN 8 pin
Approvals UL, CE UL UL UL
10marshbellofram.com • 800.727.5646 • 304-387-1200
417B 422AR 425A 328E 339B
True-Off DelayRepeat Cycle
Off First, On First
On Delay /
Time Up / Time Down
On Delay / Interval /
Signal Off DelayOn Delay / Interval
Analog Analog Digital / Display Analog Analog
24-240 VAC & 24 VDC20-240 VAC &
12-240 VDC
120-240 VAC
120 VAC24-240 VAC & 24 VDC
120 VAC
240 VAC
24 VAC/DC or 12 VDC
.1 Sec to 10 Min .05 Sec to 10 Hrs .001 Sec to 999 Hrs .05 Sec to 10 Hrs .075 Sec to 10 Hrs
DPDT, SPDT DPDT DPDT, Instantaneous DPDT DPDT
10A @ 250 VAC10A @ 250 VAC/8 pin
5 A @ 230 VAC/Term.5A @ 250 VAC 10A @ 250 VAC 10A @ 250 VAC
1/16 DIN 8 or 11 pin1/16 DIN 8 pin or
Screw Terminal1/16 DIN 8 pin 1/8 DIN 11 blade pin 36mm 8 pin
UL, CE UL, CE UL, CE, CSA UL, CE, CSA, FM UL, CE, CSA, FM
INDUSTRIAL TIMERS
11 marshbellofram.com • 800.727.5646 • 304-387-1200
Model / Series 365C 355C 652, 653, 655 CP
Mode of Operation On Delay / Interval On Delay / Interval
On Delay, Interval
Reverse Start Delay,
Repeat Cycle,
Timer/Counter
Percentage Timer
Type Digital Prog. Display Digital / Display Digital / Display Dial Adjusted
Operating Voltages120 VAC
240 VAC
24 VAC or 24 VDC
120 VAC
240 VAC
120 VAC
240 VAC
120 VAC
240 VAC
Time Range .01 Sec to 999 Hrs .01 Sec to 999.9 Min .001 Sec to 199 Hrs .9 Sec to 60 Min
Contact Configuration DPDT,
Instantaneous
DPDT, Instanta-
neous
2-DPDT, Delayed
2-DPDT, Instantaneous
1-SPDT, Instantaneous
SPST
Contact Rating Resistive7A @ 120, 240,
24 VAC5A @ 120 VAC 7A @ 240 VAC
20A @1/2hp 120
VAC
Mounting Style 72mm panel mount 72mm panel mountPlug-In case /
Panel MountPanel Mount
Approvals UL UL UL UL
12marshbellofram.com • 800.727.5646 • 304-387-1200
304GX 425AR 385AR TD, TB Series 7DT
Percentage TimerMulti-Function
Time Up / Time Down
Multi-Function
Time/CountVarious By Model Weekly Timer
Dial Adjusted Dual Digital Display Dual Digital Display Analog, Dip Switch 2 Channel Display
120 VAC90 to 270 VAC/DC
50/60 Hz
90 to 270 VAC/DC
50/60 HzVarious By Model 12-240 VAC/DC
15/30/60/120 Sec/Min 0 to 9999 sec/min/hrs
Counter -999 to 9999
Timer - 0 -9999
sec/min/hrs
Various By Model Daily, Weekly
SPST(2x) SPST,
Instantaneous(2x) SPST (NO) SPDT, DPDT (2) SPDT
10A @ 120 VAC 5a @ 230 VAC 5a @ 230 VAC 10A @ 250 VAC 16A @ 250 VAC
Panel Mount 1/16 din screw terminal 1/16 din screw terminal Plug-in socket DIN rail mount
UL, CE cURus, CE cURus, CE UL,CSA by model ––––
INDUSTRIAL COUNTERS
13 marshbellofram.com • 800.727.5646 • 304-387-1200
Model / Series 366C 356C 354C 5708A
Mode of OperationCounter-
Up, Down
Stop & Go
Count Up
High Speed
Counter w/
24VDC Supply
Timer / Counter
Frequency / Tach
TypeDigital Display
Knob AdjustableDigital / Toggle Lever
Digital / Toggle
LeverMulti Function
Operating Voltages120 VAC
240 VAC
24 VAC or VDC
120 VAC
240 VAC
120 VAC
240 VACLR44 Battery
Counting Range 1 to 99,990 1 to 99,990 1 to 99,990Count, Time, Hz,
Rpm
Contact Configuration DPDT, Instantaneous DPDT, Instantaneous SPDT ––––
Contact Rating 7A @120, 240,
24 VAC5A @ 120 VAC 5A @ 120 VAC ––––
Mounting Style 72mm panel mount 72mm panel mount 72mm panel mount 25 x 50mm
Approvals UL UL, CE UL, CE ––––
When Timing is Everything.
Process engineers and machine designers alike turn to the
Automatic Timing & Controls division of Marsh Bellofram
(ATC) for their industrial timing and control requirements.
These highly rugged, high-reliability products are engineered
to provide accurate and repeatable timing and monitoring
operations in all types of industrial environments, including
factory floor, food processing, plastics, packaging, water
treatment and many OEM applications. The ATC product
family has recently expanded to include 1/16 DIN timers,
electromechanical timers, counters, solid state cube and
plug-in timers, and time delay relays (TDR).
http://www.marshbellofram.com/automatic-timing-controls/
Welcome to ATC Diversified Electronics
For more than 50 years, the ATC Diversified Electronics division of
Marsh Bellofram (ATC Diversified) has offered some of the industry’s
highest reliability AC current monitors, motor and pump protection,
isolated switches and alternating relay products.
As a leader in solid state control products, the division was the in-
dustry pioneer in the first Phase Monitor Relay designed to protect
3-phase equipment from adverse conditions such as Phase Loss
(single phasing), Under Voltage (brown-outs), and Phase Reversal
(improper sequence). Continued investment in new product R&D
and continuous quality improvements allows the ATC Diversified
team to offer market-leading technologies, keeping pace with the
needs of an evolving industrial marketplace.
http://www.marshbellofram.com/diversified-electronics
14marshbellofram.com • 800.727.5646 • 304-387-1200
Marsh Bellofram Group of Companies
8019 Ohio River Blvd.
Newell, WV 26050 USA
Phone: 304-387-1200
Fax: 304-387-1212
800-727-5646
LTATC0602 3/16 2,500 - 5,000