Upload
sharmissv
View
213
Download
0
Embed Size (px)
Citation preview
8/9/2019 Automatic Load Share
1/2
AUTOMATIC LOAD SHARE
Aim :
To design a load share system to control the electrical devices inthe industries and other places.
Synopsis:
Automatic load share system is a very essential system for the
industries where the power is a very essential part in the industry.
In this system, which consists of various parts such as
Microcontroller, load-sharing relay etc.
The power supply produces the essential power to the system used.
The micro controller is the heart of the project. The load sharing
relay shares the load to the various loads in the main distribution
systemic this system when the e maximum demand increases the
Microcontroller automatically senses and cuts the load, which is of
lowest priority and provides supply which is of highest priority.
The load sensor senses the amount of load connected to the device.
The signal processor processes the signal coming from the load
sensor. Thus the load share works.
8/9/2019 Automatic Load Share
2/2
POWERSUPPLY
MICRO
CONTROLLER
LOAD SHARING
RELAY
LOAD1
LOAD2
LOAD3
LOAD4
SIGNALPROCESSOR
LOADSENSOR