Autocad Draftsman along with 10 Years Experience

JAVED AKHTARAutoCAD Draftsman

Mob: -+971-52-782-0377 & +919636446141(India)Email: [email protected] [email protected]

CURRICULUM VITAE

Application for the Post of AutoCAD Draftsman & CNC Plate Cutting Layout Programmer

With 10 years combined (India & Gulf) experience in Fabrication of Structural steel & Pressure Vessels

CAREER OBJECTIVE

To obtain a challenging position with a growing company that will provide an opportunity to utilize my knowledge of computer aided drafting continuing my personal and professional growth, where my positive attitude, integrity and strong desire to succeed will contribute to the company’s success.

MUC Engineering June 2014 to October 2016 (2.5 Years)

MUC Engineering is a completely independent advisory engineering and consultancy company, active in the field of civil/marine engineering. Activities Of the company are amongst others: foundation engineering, coastal and hydraulic engineering, the structural sector and mechanical engineering.

Experience in oil and gas industry which includes preparation of

General Arrangement (GA) and formwork drawings for reinforced

concrete foundations, columns, beams, walls, piers, paving, ditches, channels, etc.; Bar bending

schedule (BBS); Design and detail drawings for steel pipe-racks, shelters, platforms including

handrail, ladder, staircases, grating, etc.; Steel structure connection detailing; GA and details of

concrete block works; Sketches of observations and data collected during site visits; Material

take off (MOT) / Bill of quantities (BOQ) ; detailing for concrete repairs & strengthening.

Preparing RCC (Structural) Drawings of Footing, Column, Beam, Roof Slab, Staircase etc.

Design of RCC, Steel Structures and Foundations for Pipe racks and Technological structures.

Pump houses/ Compressor houses and sheds. Sub Station buildings, Control room, Plant and

Non Plant buildings.

Preparation of Civil & Structural GA, Foundations drawing & Connection details, with M.T.O etc.

Preparation of Pipe Support drawing & RCC work with Schedule

Preparation of Assembly list, Cutting list, Material list & Bolt List.

Preliminary checking and Final Quality Control of Drawings Receiving, distributing & finalizes all

drafting work and Manage group of draftsmanPage 1 of 7

mailto:[email protected]



Detailing of G.A drawings based on work order, Architectural drawings & design drawings.

Detailing of detailed shop drawings with respect to the approved GA drawings for each and every

components, connection details for members like columns, rafters, brackets, clips, purlin & grits,

rod , angle &pipe bracings, pipe struts, eave struts. C channels, straight & crank sag rods, flange

braces, crane girders, mono rails, trusses, platforms, mezzanine beams & columns, stair cases,

handrails, walkways, cage ladders, sliding doors, walk doors, etc. for various Projects.

Work on projects in all design stages (preliminary design, building design, detailed design,

approval design, and tender design

Able to develop detail drawings based on the inputs given by the Design Engineers

Reviewing, checking & approving the drawings produced by Sub-Contractor.

Coordinating with design engineer / manager for inputs necessary

Reviewing of client's specification, client's standard drawings and understanding the

requirements and incorporating required details in the drawings and other supporting documents.

Preparation of General Arrangement drawings, detailed drawings and fabrication drawings based

on the input provided by design engineer/manager and client documents, drawings and

specification Using Auto CAD

Producing detailed and fabrication drawings of structure for Offshore, Onshore & Construction

purpose

M/s. Global Process Systems LLC September 2008 to September 2013 (5 years)

Manufacturer of Process Skids, Piping & Structural Steel, Pressure Vessels & Assembly of Boilers/ Boiler External Piping ISO Certified (ISO 9001:2008, ISO 14001:2004 & OHSAS 18001:2007,) and ASME Certified & authorized for the use of ASME U, U2, A and R & NB Stamps

PROFESSIONAL EXPERIENCE

A position as a Lead Draftsman (Structural steel& Pressure Vessels) to work with Oil & Gas

fields at Global Process Systems LLC Abu Dhabi UAE through AutoCAD software.

Having 5 years’ experience in Pressure vessels & Structural steel with oil & gas field.

I'm able to prepare Detailing of pressure vessels, (GA drawing, External drawing, internal

Page 2 of 7




Drawing, Nozzle Details, saddle detail drawings, Pipe support & platform support drawing, plate

Layout, Shell Development for checking fouling & Structural works Preparation of Fabrication

Details Drawings, platform & pipe support clips drawings and Insulation support drawings for

Different Types of pressure Vessels used in Petrochemical and Oil & Gas Industries by AutoCAD

Software as per standards and client’s specifications

Preparation of General Arrangement, detailed and fabrication drawings Of Pressure Vessels &

Structural steel using Auto CAD.

Experience of Structural Steel includes preparation of Framing Layouts/General arrangement

drawings, Member and Connection Detail Designs, Shop/Fabrication and As-built drawings,

Material Takeoff & Final Bill of Materials. Experienced in the drafting of various types of offshore

and onshore structures such as subassembly, modules equipment’s and other Assembly’s skids

& Pipe racks drawings and related secondary structures such as stairs, ladders, plating, grating

and handrail layouts, etc.

Preparation of General arrangement drawings, Shop and fabrication drawings, Sub-assembly

drawings, As-built drawings, Cut lists, Plate developments, Plating/Grating layouts, Hand railings,

Nesting plans, etc. Ensures correct seam orientation and prepares rolling packages.

Detailing in AutoCAD of steel structures based from Structural/Architectural drawings,

preliminary concepts and sketches to detailed engineering drawings, like columns, braces,

appurtenances and other components as required for visualization and production; Create Shop

and Fabrication drawings from the model.

Prepares Input for Control sheets, detailed Material takeoffs (MTO); Ensures and verify that all

works to be performed conforms to job specifications, design data, guidelines and company

procedures. Complete documentation packages.

Reviews and checks the work of other designers/draftsmen to ensure accuracy and correctness

of their work prior to their formal issue for construction. Supervise and train other technologists,

technicians and drafters;

Ensure that the company quality system and client's design and drafting procedure are

maintained to produce a high quality and professional type output from the drafting office.

Page 3 of 7




Quantifying of materials from General Arrangement drawings and other Supporting documents.

Calculating the weight of materials, surface area of the materials in Drawings for Blasting,

Oxidation and Painting purpose.

Coordinating with workshop engineer, supervisor & foreman's to simplify the method of

fabrication.

Preparation of purchase requisition for various items during the project.

Preparing 3D models of Mechanical parts, Piping & Structure for better understanding and

visualizing using Auto CAD

Maintaining records of all project drawings & documents as per ISO standard.

Prepares detailed engineering drawings, shop and fabrication drawings, cut lists, nesting plans,

Input for Control sheets, MTOs etc. under supervision of senior colleagues.

Undertakes back-Drafting of drawings to reflect corrections that need to be made to initial

documentation. Revises drawings incorporating subsequent modifications.

Assists in the production of "as built" drawings following receipt of marked up drawings from the

project team.

RESPONSIBILITIES

Review Client GA Drawings / Material Take –Offs, Ensuring That Extreme Care Is Exercised With Respect Of Accuracy.

Perform Pressure Vessels & Structural Steel Detailing From Engineering Drawings Using Auto Cad software

Producing Material Take Offs From The Engineering Drawing To Permit The Ordering Of Materials.

Responsible For Ensuring That the Vendor Engineering Drawings / Detail Drawings Comply To the Project Requirements

Responsible for Preparing CNC Plate Cutting Layout’s by using Columbus software Prepares as built drawings Carry Out Any Other Duties As May Be Determined By Engineering Services Superintendent /

Pipe / Skid Shop Manager.

EDUCATION & QUALIFICATION

Page 4 of 7




Higher Secondary School, SBJHSS, Science (PCB with 70%) Ratangarh Dist. Churu. Mechanical Draftsman (Structural steel & Pressure Vessels)

Completed AutoCAD 2D/3D,Autodesk 3ds Max & DCA Certificate Course by IICE (Indian institute of Computer Education) Delhi Pitampura

Basic knowledge of Columbus CNC Software for plate cutting (Nesting layout) for fabrication

COMPUTER SKILLS AND SOFTWARE USED

AutoCAD/Autodesk 3ds Max 2000 & higher version/Word/excel/PowerPoint/Acrobat /outlook

Columbus CNC Software for plate cutting layout (Plate Nesting layout)

TRAINING / SEMINAR ATTENDED

Basic HSE Awareness and Office Safety

Certified in firefighting and first aid safety trainings

PERSONAL DETAILS

Father Name : Mr. Ismail Teli

Permanent Address : W/ No. 29, Near Teliyan Masjid Ratangarh, Churu Dist. Rajasthan St., India.

Date of Birth & Age : 13th June 1986

Marital Status & Sex : Married, Male

Nationality & Religion : Indian, Islam

Languages Known : English, Hindi & Urdu

PASSPORT DETAILS

Passport No.: G2950127 Place of Issue: JAIPURDate of Issue: 12-04-2007 Date of Expiry: 11-04-2017

PROJECTS SUMMARY

Project – 1

Train A, B & C Acid Gas Removal

Package - Petronas Carigali SDN

BHD

Client: TECHNIP

Page 5 of 7




Project – 2 UOP 450PPH CCR

REPAR Brazil

Client: UOP LLC

Project – 3

UOP 700PPH CCR REVAP Brazil

Client: UOP LLC

Project – 4

Gas Treatment Unit Train 1 & 2

Client: CADOGAN

Project – 5

Central Processing Facility

Comprising 3 Process Trains

Client: OMV YEMEN

Project – 6

Oily Water Treatment Package

Client: IOEC

Project – 7

HP Flare System Package Yemen

(Block S2) Al Uqlah CPF

Client: FLAREON INC.

Project – 8

Supply of Air receiver & Oil

collection pot

Client: KENTZ

Project – 9

Flourine Complex Project

Client: AJES

Project – 10

Fluorine Complex Project -

Structural Steel Fabrication

Client: AJES

Project – 11

Pipe Support Fabrication

Client: CCC

Project – 12

Accommodation Structure

Client: CCC

Project – 13

Saipem Sohar Jetty

Client: WILLIAM HARE

Project – 14

Sohar Aggregate Jetty Platform

Client: WILLIAM HARE

Project – 15

Oily Water Treatment Package SP

17 &18

Client: IOEC

Project – 16

CCC NGL Habshan 5 Project -

Fabrication of Pipe Supports

Client: CCC

Project – 17

Fabricated Pipe Clamps & Cradle

support

Client: AJES

Project – 18

Pipe supports Fabrication

Client: KHARAFI NATIONAL

CO LLC

Project – 19

Pipe supports Fabrication

Client: AJES

Project – 20

South Pars Gas Field Development

Project Phase 14 Offshore

Platforms

Client: ISOICO

Project – 21

Fabrication & assembly of water

treatment skids for PAE, Thailand

Client: SADRA

Project – 22

Fabrication of Cladded Pressure

vessels for KIPCO

Client: KIPCO

Project – 23

ADMA-APCO (100MBD Das

facilities upgrade project)

Client: CCC

Project – 24

PDO Lukwaire Fabrication of

pressure vessels

Client: L & T India

Project – 25

BAPETCO. Fabrication of vessels

and skids for Shell

Client: SHELL

Project – 26

Eni Iraq b. v. Zubair Oil field

Development Project

Client: Weatherford Oil Tool

Middle East

Project – 27

Design Review for IOT/ IL&FS

Civil Design

Client: FNCT

Project – 28Page 6 of 7




Northern Break Water Pipe rack 5

Client: Port of Fujairah

Project – 29

Topaz Jetty Musaffah

Client: Topaz Engineering

Project – 30

Pipe rack #3 VO#04


Project – 31

Das Island IGD-E Expansion

Project

Client: Athena

Project – 32

Extension of MM1 PIC room


Project – 33

Quay Wall Design Marfa Port

Client: Majestic

Project – 34

Pontoons at Taweelah Fishing

Harbour

Client: Majestic Marine

Project – 35

Civil Design for ECOMAR

Terminal

Client: FNCT

Project – 36

Taqah fishing harbour pile design

Client: Marinetek

Project – 37

Storage Shed for FNCT

Client: FNCT

Project – 38

FRA conveyor belt crossing

Client: Fujairah Rock and

Aggregate

Project – 39

Pedestrian Bridge

Client: FujSeng

Project – 40

Rotary Plot in Al Hayl

Client: Rotary Engineering

Project – 41

Oil store shed

Client: Semcorp Gulf O&M Co

Ltd

Project – 42

Fujairah Rockwool Factory Line 2

Project

Client: Fujairah Rockwool

Factory

Project – 43

Fujairah Rockwool Factory Line 3

Project


Factory

Project – 44

Siji Package Plant

Client: FNCT

Project – 45

Fujairah Rockwool Factory - Phase

II


Factory

Project – 46

ENOC Security Gates

Client: ENOC

Project – 47

Small Tanker Berth 3A and 3B

Detailed Design


Page 7 of 7


Documents

Autocad Draftsman along with 10 Years Experience